1 2017-02-14 Jim Wilson <jim.wilson@linaro.org>
3 * simulator.c: (LDn_STn_SINGLE_LANE_AND_SIZE): New.
4 (do_vec_LDn_single, do_vec_STn_single): New.
5 (do_vec_LDnR): Add and set new nregs var. Replace switch on nregs with
6 loop over nregs using new var n. Add n times size to address in loop.
8 (do_vec_load_store): Add comment for instruction bit 24. New var
9 single to hold instruction bit 24. Add new code to use single. Move
10 ldnr support inside single if statements. Fix ldnr register counts
11 inside post if statement. Change HALT_NYI calls to HALT_UNALLOC.
13 2017-01-23 Jim Wilson <jim.wilson@linaro.org>
15 * simulator.c (do_vec_compare): Add case 0x23 for CMTST.
17 2017-01-17 Jim Wilson <jim.wilson@linaro.org>
19 * simulator.c (do_vec_ADDV): Call aarch64_set_vec_u64 instead of
20 aarch64_set_reg_u64. In case 2, call HALT_UNALLOC if not full. In
21 case 3, call HALT_UNALLOC unconditionally.
22 (do_vec_XTN): Delete shifts. In case 2, change index from i + 4 to
23 i + 2. Delete if on bias, change index to i + bias * X.
25 2017-01-09 Jim Wilson <jim.wilson@linaro.org>
27 * simulator.c (do_vec_UZP): Rewrite.
29 2017-01-04 Jim Wilson <jim.wilson@linaro.org>
31 * cpustate.c: Include math.h.
32 (aarch64_set_FP_float): Use signbit to check for signed zero.
33 (aarch64_set_FP_double): Likewise.
34 * simulator.c (do_vec_MOV_immediate, case 0x8): Add missing break.
35 (do_vec_mul): In all DO_VEC_WIDENING_MUL calls, make second and fourth
36 args same size as third arg.
37 (fmaxnm): Use isnan instead of fpclassify.
38 (fminnm, dmaxnm, dminnm): Likewise.
39 (do_vec_MLS): Reverse order of subtraction operands.
40 (dexSimpleFPCondSelect): Call aarch64_get_FP_double or
41 aarch64_get_FP_float to get source register contents.
42 (UINT_MIN, ULONG_MIN, FLOAT_UINT_MAX, FLOAT_UINT_MIN,
43 DOUBLE_UINT_MAX, DOUBLE_UINT_MIN, FLOAT_ULONG_MAX, FLOAT_ULONG_MIN,
44 DOUBLE_ULONG_MAX, DOUBLE_ULONG_MIN): New.
45 (do_fcvtzu): Use ULONG instead of LONG, and UINT instead of INT in
46 raise_exception calls.
48 2016-12-21 Jim Wilson <jim.wilson@linaro.org>
50 * simulator.c (set_flags_for_float_compare): Add code to handle Inf.
51 Add comment to document NaN issue.
52 (set_flags_for_double_compare): Likewise.
54 2016-12-13 Jim Wilson <jim.wilson@linaro.org>
56 * simulator.c (NEG, POS): Move before set_flags_for_add64.
57 (set_flags_for_add64): Replace with a modified copy of
60 2016-12-03 Jim Wilson <jim.wilson@linaro.org>
62 * simulator.c (tbnz, tbz): Cast 1 to uint64_t before shifting.
63 (dexTestBranchImmediate): Shift high bit of pos by 5 not 4.
65 2016-12-01 Jim Wilson <jim.wilson@linaro.org>
67 * simulator.c (fsturs): Switch use of rn and st variables.
68 (fsturd, fsturq): Likewise
70 2016-08-15 Mike Frysinger <vapier@gentoo.org>
72 * interp.c: Include bfd.h.
73 (symcount, symtab, aarch64_get_sym_value): Delete.
74 (remove_useless_symbols): Change count type to long.
75 (aarch64_get_func): Add SIM_DESC to arg list. Add symcount
76 and symtab local variables.
77 (sim_create_inferior): Delete storage. Replace symbol code
78 with a call to trace_load_symbols.
79 * memory.c: Delete bfd.h, elf/internal.h, and elf/common.h
81 (aarch64_get_heap_start): Change aarch64_get_sym_value to
83 * memory.h: Delete bfd.h include.
84 (mem_add_blk): Delete unused prototype.
85 * simulator.c (bl, blr): Pass SIM_DESC to aarch64_get_func.
86 * simulator.c (aarch64_get_func): Add SIM_DESC to arg list.
87 (aarch64_get_sym_value): Delete.
89 2016-08-12 Nick Clifton <nickc@redhat.com>
91 * simulator.c (aarch64_step): Revert pervious delta.
92 (aarch64_run): Call sim_events_tick after each
93 instruction is simulated, and if necessary call
95 * simulator.h: Revert previous delta.
97 2016-08-11 Nick Clifton <nickc@redhat.com>
99 * interp.c (sim_create_inferior): Allow for being called with a
100 NULL abfd parameter. If a bfd is provided, initialise the sim
101 with that start address.
102 * simulator.c (HALT_NYI): Just print out the numeric value of the
103 instruction when not tracing.
104 (aarch64_step): Change from static to global.
105 * simulator.h: Add a prototype for aarch64_step().
107 2016-07-27 Alan Modra <amodra@gmail.com>
109 * memory.c: Don't include libbfd.h.
111 2016-07-21 Nick Clifton <nickc@redhat.com>
113 * simulator.c (fsqrts): Use sqrtf rather than sqrt.
115 2016-06-30 Jim Wilson <jim.wilson@linaro.org>
117 * cpustate.h: Include config.h.
118 (union GRegisterValue): Add WORDS_BIGENDIAN check. For big endian code
119 use anonymous structs to align members.
120 * simulator.c (aarch64_step): Use sim_core_read_buffer and
121 endian_le2h_4 to read instruction from pc.
123 2016-05-06 Nick Clifton <nickc@redhat.com>
125 * simulator.c (do_FMLA_by_element): New function.
126 (do_vec_op2): Call it.
128 2016-04-27 Nick Clifton <nickc@redhat.com>
130 * simulator.c: Add TRACE_DECODE statements to all emulation
133 2016-03-30 Nick Clifton <nickc@redhat.com>
135 * cpustate.c (aarch64_set_reg_s32): New function.
136 (aarch64_set_reg_u32): New function.
137 (aarch64_get_FP_half): Place half precision value into the correct
139 (aarch64_set_FP_half): Likewise.
140 * cpustate.h: Add prototypes for aarch64_set_reg_s32 and
142 * memory.c (FETCH_FUNC): Cast the read value to the access type
143 before converting it to the return type. Rename to FETCH_FUNC64.
144 (FETCH_FUNC32): New macro. Duplicates FETCH_FUNC64 but for 32-bit
145 accesses. Use for 32-bit memory access functions.
146 * simulator.c (ldrsb_wb): Use sign extension not zero extension.
147 (ldrb_scale_ext, ldrsh32_abs, ldrsh32_wb): Likewise.
148 (ldrsh32_scale_ext, ldrsh_abs, ldrsh64_wb): Likewise.
149 (ldrsh_scale_ext, ldrsw_abs): Likewise.
150 (ldrh32_abs): Store 32 bit value not 64-bits.
151 (ldrh32_wb, ldrh32_scale_ext): Likewise.
152 (do_vec_MOV_immediate): Fix computation of val.
153 (do_vec_MVNI): Likewise.
154 (DO_VEC_WIDENING_MUL): New macro.
155 (do_vec_mull): Use new macro.
156 (do_vec_mul): Use new macro.
157 (do_vec_MLA): Read values before writing.
158 (do_vec_xtl): Likewise.
159 (do_vec_SSHL): Select correct shift value.
160 (do_vec_USHL): Likewise.
161 (do_scalar_UCVTF): New function.
162 (do_scalar_vec): Call new function.
163 (store_pair_u64): Treat reads of SP as reads of XZR.
165 2016-03-29 Nick Clifton <nickc@redhat.com>
167 * cpustate.c: Remove space after asterisk in function parameters.
168 * decode.h (greg): Delete unused function.
169 (vreg, shift, extension, scaling, writeback, condcode): Likewise.
170 * simulator.c: Use INSTR macro in more places.
171 (HALT_NYI): Use sim_io_eprintf in place of fprintf.
172 Remove extraneous whitespace.
174 2016-03-23 Nick Clifton <nickc@redhat.com>
176 * cpustate.c (aarch64_get_FP_half): New function. Read a vector
177 register as a half precision floating point number.
178 (aarch64_set_FP_half): New function. Similar, but for setting
179 a half precision register.
180 (aarch64_get_thread_id): New function. Returns the value of the
181 CPU's TPIDR register.
182 (aarch64_get_FPCR): New function. Returns the value of the CPU's
183 floating point control register.
184 (aarch64_set_FPCR): New function. Set the value of the CPU's FPCR
186 * cpustate.h: Add prototypes for new functions.
187 * sim-main.h (struct _sim_cpu): Add FPCR and tpidr fields.
188 * memory.c: Use unaligned core access functions for all memory
190 * simulator.c (HALT_NYI): Generate an error message if tracing
191 will not tell the user why the simulator is halting.
192 (HALT_UNREACHABLE): Delete. Delete (unneeded) uses of the macro.
193 (INSTR): New time-saver macro.
194 (fldrb_abs): New function. Loads an 8-bit value using a scaled
196 (fldrh_abs): New function. Likewise for 16-bit values.
197 (do_vec_SSHL): Allow for negative shift values.
198 (do_vec_USHL): Likewise.
199 (do_vec_SHL): Correct computation of shift amount.
200 (do_vec_SSHR_USHR): Correct decision of signed vs unsigned
201 shifts and computation of shift value.
202 (clz): New function. Counts leading zero bits.
203 (do_vec_CLZ): New function. Implements CLZ (vector).
204 (do_vec_MOV_element): Call do_vec_CLZ.
205 (dexSimpleFPCondCompare): Implement.
206 (do_FCVT_half_to_single): New function. Implements one of the
208 (do_FCVT_half_to_double): New function. Likewise.
209 (do_FCVT_single_to_half): New function. Likewise.
210 (do_FCVT_double_to_half): New function. Likewise.
211 (dexSimpleFPDataProc1Source): Call new FCVT functions.
212 (do_scalar_SHL): Handle negative shifts.
213 (do_scalar_shift): Handle SSHR.
214 (do_scalar_USHL): New function.
215 (do_double_add): Simplify to just performing a double precision
216 add operation. Move remaining code into...
217 (do_scalar_vec): ... New function.
218 (dexLoadUnsignedImmediate): Call new fldrb_abs and fldrh_abs
220 (system_get): Add support for TPIDR, CTR, FPCR, FPSR and CPSR
222 (system_set): New function.
223 (do_MSR_immediate): New function. Stub for now.
224 (do_MSR_reg): New function. Likewise. Partially implements MSR
226 (do_SYS): New function. Stub for now,
227 (dexSystem): Call new functions.
229 2016-03-18 Nick Clifton <nickc@redhat.com>
231 * cpustate.c: Remove spurious spaces from TRACE strings.
232 Print hex equivalents of floats and doubles.
233 Check element number against array size when accessing vector
235 (GET_VEC_ELEMENT): Fix off by one error checking for an invalid
237 (SET_VEC_ELEMENT): Likewise.
238 (GET_VEC_ELEMENT): And fix thinko using macro arguments.
240 * memory.c: Trace memory reads when --trace-memory is enabled.
241 Remove float and double load and store functions.
242 * memory.h (aarch64_get_mem_float): Delete prototype.
243 (aarch64_get_mem_double): Likewise.
244 (aarch64_set_mem_float): Likewise.
245 (aarch64_set_mem_double): Likewise.
246 * simulator (IS_SET): Always return either 0 or 1.
247 (IS_CLEAR): Likewise.
248 (fldrs_pcrel): Load and store floats using 32-bit memory accesses
249 and doubles using 64-bit memory accesses.
250 (fldrd_pcrel, fldrs_wb, fldrs_abs, fldrs_scale_ext): Likewise.
251 (fldrd_wb, fldrd_abs, fsturs, fsturd, fldurs, fldurd): Likewise.
252 (fstrs_abs, fstrs_wb, fstrs_scale_ext, fstrd_abs): Likewise.
253 (fstrd_wb, fstrd_scale_ext, store_pair_float): Likewise.
254 (store_pair_double, load_pair_float, load_pair_double): Likewise.
255 (do_vec_MUL_by_element): New function.
256 (do_vec_op2): Call do_vec_MUL_by_element.
257 (do_scalar_NEG): New function.
258 (do_double_add): Call do_scalar_NEG.
260 2016-03-03 Nick Clifton <nickc@redhat.com>
262 * simulator.c (set_flags_for_sub32): Correct type of signbit.
263 (CondCompare): Swap interpretation of bit 30.
264 (DO_ADDP): Delete macro.
265 (do_vec_ADDP): Copy source registers before starting to update
266 destination register.
267 (do_vec_FADDP): Likewise.
268 (do_vec_load_store): Fix computation of sizeof_operation.
269 (rbit64): Fix type of constant.
270 (aarch64_step): When displaying insn value, display all 32 bits.
272 2016-01-10 Mike Frysinger <vapier@gentoo.org>
274 * config.in, configure: Regenerate.
276 2016-01-10 Mike Frysinger <vapier@gentoo.org>
278 * configure: Regenerate.
280 2016-01-10 Mike Frysinger <vapier@gentoo.org>
282 * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
283 * configure: Regenerate.
285 2016-01-10 Mike Frysinger <vapier@gentoo.org>
287 * configure: Regenerate.
289 2016-01-10 Mike Frysinger <vapier@gentoo.org>
291 * configure: Regenerate.
293 2016-01-10 Mike Frysinger <vapier@gentoo.org>
295 * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
296 * configure: Regenerate.
298 2016-01-10 Mike Frysinger <vapier@gentoo.org>
300 * configure: Regenerate.
302 2016-01-10 Mike Frysinger <vapier@gentoo.org>
304 * configure: Regenerate.
306 2016-01-09 Mike Frysinger <vapier@gentoo.org>
308 * config.in, configure: Regenerate.
310 2016-01-06 Mike Frysinger <vapier@gentoo.org>
312 * interp.c (sim_create_inferior): Mark argv and env const.
313 (sim_open): Mark argv const.
315 2016-01-05 Mike Frysinger <vapier@gentoo.org>
317 * interp.c: Delete dis-asm.h include.
318 (info, opbuf, op_printf, aarch64_print_insn, sim_dis_read): Delete.
319 (sim_create_inferior): Delete disassemble init logic.
320 (OPTION_DISAS, aarch64_option_handler, aarch64_options): Delete.
321 (sim_open): Delete sim_add_option_table call.
322 * memory.c (mem_error): Delete disas check.
323 * simulator.c: Delete dis-asm.h include.
325 (HALT_UNALLOC): Replace disassembly logic with TRACE_DISASM.
326 (HALT_NYI): Likewise.
327 (handle_halt): Delete disas call.
328 (aarch64_step): Replace disas logic with TRACE_DISASM.
329 * simulator.h: Delete dis-asm.h include.
330 (aarch64_print_insn): Delete.
332 2016-01-04 Mike Frysinger <vapier@gentoo.org>
334 * simulator.c (MAX, MIN): Delete.
335 (do_vec_maxv): Change MAX to max and MIN to min.
336 (do_vec_fminmaxV): Likewise.
338 2016-01-04 Tristan Gingold <gingold@adacore.com>
340 * simulator.c: Remove syscall.h include.
342 2016-01-04 Mike Frysinger <vapier@gentoo.org>
344 * configure: Regenerate.
346 2016-01-03 Mike Frysinger <vapier@gentoo.org>
348 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
349 * configure: Regenerate.
351 2016-01-02 Mike Frysinger <vapier@gentoo.org>
353 * configure: Regenerate.
355 2015-12-27 Mike Frysinger <vapier@gentoo.org>
357 * interp.c (sim_dis_read): Change private_data to application_data.
358 (sim_create_inferior): Likewise.
360 2015-12-27 Mike Frysinger <vapier@gentoo.org>
362 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
364 2015-12-26 Mike Frysinger <vapier@gentoo.org>
366 * config.in, configure: Regenerate.
368 2015-12-26 Mike Frysinger <vapier@gentoo.org>
370 * interp.c (sim_create_inferior): Update comment and argv check.
372 2015-12-14 Nick Clifton <nickc@redhat.com>
374 * simulator.c (system_get): New function. Provides read
375 access to the dczid system register.
376 (do_mrs): New function - implements the MRS instruction.
377 (dexSystem): Call do_mrs for the MRS instruction. Halt on
378 unimplemented system instructions.
380 2015-11-24 Nick Clifton <nickc@redhat.com>
382 * configure.ac: New configure template.
383 * aclocal.m4: Generate.
384 * config.in: Generate.
385 * configure: Generate.
386 * cpustate.c: New file - functions for accessing AArch64 registers.
387 * cpustate.h: New header.
388 * decode.h: New header.
389 * interp.c: New file - interface between GDB and simulator.
390 * Makefile.in: New makefile template.
391 * memory.c: New file - functions for simulating aarch64 memory
393 * memory.h: New header.
394 * sim-main.h: New header.
395 * simulator.c: New file - aarch64 simulator functions.
396 * simulator.h: New header.