1 2021-02-13 Mike Frysinger <vapier@gentoo.org>
3 * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
4 * aclocal.m4, configure: Regenerate.
6 2021-02-06 Mike Frysinger <vapier@gentoo.org>
8 * configure: Regenerate.
10 2021-01-11 Mike Frysinger <vapier@gentoo.org>
12 * config.in, configure: Regenerate.
14 2021-01-09 Mike Frysinger <vapier@gentoo.org>
16 * configure: Regenerate.
18 2021-01-08 Mike Frysinger <vapier@gentoo.org>
20 * configure: Regenerate.
22 2021-01-04 Mike Frysinger <vapier@gentoo.org>
24 * wrapper.c: Include stdlib.h.
26 2021-01-04 Mike Frysinger <vapier@gentoo.org>
28 * iwmmxt.c: Include stdlib.h.
30 2021-01-04 Mike Frysinger <vapier@gentoo.org>
32 * configure: Regenerate.
34 2020-12-15 Nick Clifton <nickc@redhat.com>
36 * wrapper.c (sim_create_inferior): Accept some more ARM machine numbers.
38 2020-12-15 Jens Bauer <jens@plustv.dk>
40 * armemu.c (handle_v6_insn): Add support for SDIV and UDIV.
41 * thumbemu.c (handle_T2_insn): Likewise.
43 2020-10-20 Dr. David Alan Gilbert <dgilbert@redhat.com>
45 * armos.c (SWIread): Fix printf format.
47 2020-08-13 Luis Machado <luis.machado@linaro.org>
51 * wrapper.c (sim_target_parse_command_line): Free discarded argv
53 (sim_open): Use a duplicate of argv instead of the original argv.
55 2020-01-17 Christian Biesinger <cbiesinger@google.com>
57 * iwmmxt.c: Fix spelling error (seperate).
59 2019-12-06 Luis Machado <luis.machado@linaro.org>
61 * armemu.c (isize): Move this declaration ...
62 * arminit.c (isize): ... here.
63 * maverick.h: New file.
64 * wrapper.c: Include "maverick.h".
65 (<struct maverick_regs>, <union maverick_acc_regs>): Remove and update
67 (sim_create_inferior): Cast variables to proper type.
68 * maverick.c: Include "maverick.h".
69 (<struct maverick_regs>, <union maverick_acc_regs>): Move
70 declarations to maverick.h and update comment.
71 (DSPsc, DSPacc, DSPregs): Adjust comment.
73 2018-01-02 Nick Clifton <nickc@redhat.com>
76 * maverick.c (DSPCDP4): Add missing parameter to debug print
79 2017-09-21 Yao Qi <yao.qi@linaro.org>
81 * wrapper.c (print_insn): Use disassembler instead of
82 print_insn_little_arm.
84 2017-09-06 John Baldwin <jhb@FreeBSD.org>
86 * configure: Regenerate.
88 2017-02-13 Mike Frysinger <vapier@gentoo.org>
90 * armos.c: Include libiberty.h.
91 (SWIopen): Use ARRAY_SIZE.
92 * armsupp.c: Include libiberty.h.
93 (ModeToBank): Use ARRAY_SIZE.
94 * wrapper.c (sim_target_parse_command_line): Likewise.
96 2016-07-14 Nick Clifton <nickc@redhat.com>
98 * armemu.c (Multiply64): Only issue error messages about invalid
99 arguments if debugging is enabled.
100 * armos.c (ARMul_OSHandleSWI): Ignore invalid flags.
102 2016-01-10 Mike Frysinger <vapier@gentoo.org>
104 * config.in, configure: Regenerate.
106 2016-01-10 Mike Frysinger <vapier@gentoo.org>
108 * configure: Regenerate.
110 2016-01-10 Mike Frysinger <vapier@gentoo.org>
112 * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
113 * configure: Regenerate.
115 2016-01-10 Mike Frysinger <vapier@gentoo.org>
117 * configure: Regenerate.
119 2016-01-10 Mike Frysinger <vapier@gentoo.org>
121 * configure: Regenerate.
123 2016-01-10 Mike Frysinger <vapier@gentoo.org>
125 * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
126 * configure: Regenerate.
128 2016-01-10 Mike Frysinger <vapier@gentoo.org>
130 * configure: Regenerate.
132 2016-01-10 Mike Frysinger <vapier@gentoo.org>
134 * configure: Regenerate.
136 2016-01-09 Mike Frysinger <vapier@gentoo.org>
138 * config.in, configure: Regenerate.
140 2016-01-06 Mike Frysinger <vapier@gentoo.org>
142 * wrapper.c (sim_create_inferior): Mark argv and env const.
143 (sim_open): Mark argv const.
145 2016-01-04 Mike Frysinger <vapier@gentoo.org>
147 * configure: Regenerate.
149 2016-01-03 Mike Frysinger <vapier@gentoo.org>
151 * wrapper.c (sim_open): Update sim_parse_args comment.
153 2016-01-03 Mike Frysinger <vapier@gentoo.org>
155 * wrapper.c (sim_target_parse_arg_array): Replace for loop with
158 2016-01-03 Mike Frysinger <vapier@gentoo.org>
160 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
161 * configure: Regenerate.
163 2016-01-02 Mike Frysinger <vapier@gentoo.org>
165 * configure: Regenerate.
166 * wrapper.c (init): Change BIG_ENDIAN to BFD_ENDIAN_BIG.
168 2015-12-30 Mike Frysinger <vapier@gentoo.org>
170 * wrapper.c (sim_store_register): Rename to ...
171 (arm_reg_store): ... this.
172 (sim_fetch_register): Rename to ...
173 (arm_reg_fetch): ... this.
174 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
176 2015-12-27 Mike Frysinger <vapier@gentoo.org>
178 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
180 2015-12-26 Mike Frysinger <vapier@gentoo.org>
182 * config.in, configure: Regenerate.
184 2015-12-25 Mike Frysinger <vapier@gentoo.org>
186 * Makefile.in (SIM_OBJS): Delete bag.o.
187 * armdefs.h (struct ARMul_State): Delete ErrorCode.
188 (ResetPin, FIQPin, IRQPin, AbortPin, TransPin, BigEndPin, Prog32Pin,
189 Data32Pin, LateAbortPin, ARMul_OSExit, ARMul_OSLastErrorP,
190 ARMul_Debug, ARMul_OSException,rdi_log, SpinCursor, HOURGLASS,
191 HOURGLASS_RATE): Delete.
192 * armemu.c (ARMul_Emulate26): Delete ARMul_Debug call.
193 * arminit.c (ARMul_Reset): Do not set state->ErrorCode.
194 (ARMul_Abort): Delete ARMul_OSException call.
195 * armopts.h: Delete file.
196 * armos.c (isatty_, ARMul_OSExit, ARMul_OSException,
197 ARMul_OSLastErrorP, ARMul_Debug, BUFFERSIZE, UNIQUETEMPS, NOOP,
198 BINARY, READOP, WRITEOP, FIXCRLF): Delete.
199 (struct OSblock): Delete Time0, ErrorP, FileTable, FileFlags, and
201 (ARMul_OSInit): Do not set OSptr->ErrorP, OSptr->FileTable, or
203 * armrdi.c: Delete file.
204 * armvirt.c: Delete armopts.h include.
205 (ARMul_LoadInstrS): Delete HOURGLASS logic.
206 * bag.c, bag.h, communicate.c, communicate.h, dbg_conf.h, dbg_cp.h,
207 dbg_hif.h: Delete files.
208 * dbg_rdi.h (RDP_*, RDI*): Delete defines.
209 (PointHandle, ThreadHandle, Dbg_ConfigBlock, Dbg_HostosInterface,
210 Dbg_MCState, getbufferproc): Delete.
211 (rdi_*): Delete Functions.
212 (RDI_ConfigAspect, RDI_ConfigMatchType, RDI_NameList): Delete
213 (struct RDIProcVec): Delete.
214 * gdbhost.c, gdbhost.h, kid.c, main.c, parent.c: Delete files.
215 * wrapper.c (ARMul_Debug): Delete.
217 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
219 * thumbemu.c (handle_T2_insn): Fix left shift of negative value.
220 * armemu.c (handle_v6_insn): Likewise.
222 2015-11-14 Mike Frysinger <vapier@gentoo.org>
224 * wrapper.c (sim_close): Delete.
226 2015-07-14 Nick Clifton <nickc@redhat.com>
228 * armcopro.c: Remove extraneous whitespace.
229 * armdefs.h: Likewise.
230 * armfpe.h: Likewise.
231 * arminit.c: Likewise.
232 * armopts.h: Likewise.
235 * armrdi.c: Likewise.
236 * armsupp.c: Likewise.
237 * armvirt.c: Likewise.
240 * communicate.c: Likewise.
241 * communicate.h: Likewise.
242 * dbg_conf.h: Likewise.
243 * dbg_cp.h: Likewise.
244 * dbg_hif.h: Likewise.
245 * dbg_rdi.h: Likewise.
246 * gdbhost.c: Likewise.
247 * gdbhost.h: Likewise.
248 * iwmmxt.c: Likewise.
249 * iwmmxt.h: Likewise.
252 * maverick.c: Likewise.
253 * parent.c: Likewise.
254 * thumbemu.c: Likewise.
255 * wrapper.c: Likewise.
257 2015-07-02 Nick Clifton <nickc@redhat.com>
259 * Makefile.in (SIM_EXTRA_CFLAGS): Revert previous delta.
260 (SIM_EXTRA_LIBS): Add -lm.
262 2015-06-28 Nick Clifton <nickc@redhat.com>
264 * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm.
265 * armdefs.h (ARMdval, ARMfval): New types.
266 (ARM_VFP_reg): New union.
267 (struct ARMul_State): Add VFP_Reg and FPSCR fields.
268 (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor
269 macros for the new VFP_Reg field.
270 * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT,
271 QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8,
272 USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX
274 (handle_VFP_move): New function.
275 (ARMul_Emulate16): Add checks for newly supported v6
276 instructions. Add support for VMRS, VMOV and MRC instructions.
277 (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when
278 operating in v6 mode.
279 * armemu.h (t_resolved): Define.
280 * armsupp.c: Include math.h.
281 (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH,
282 VSTM, VLDM and VPOP instructions.
283 (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the
284 new handle_VFP_xfer function.
285 (ARMul_STC): Likewise.
286 (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS,
287 VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP,
288 VCMPE and VCVT instructions.
289 (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the
290 new handle_VFP_op function.
291 * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros.
292 (test_cond): New function. Tests a condition and returns non-zero
293 if the condition has been met.
294 (handle_IT_block): New function.
295 (in_IT_block): New function.
296 (IT_block_allow): New function.
297 (ThumbExpandImm): New function.
298 (handle_T2_insn): New function. Handles T2 thumb instructions.
299 (handle_v6_thumb_insn): Add next_instr and pc parameters.
300 (ARMul_ThumbDecode): Add support for IT blocks. Add support for
302 * wrapper.c (sim_create_inferior): Detect a thumb address and call
305 2015-06-23 Mike Frysinger <vapier@gentoo.org>
307 * configure: Regenerate.
309 2015-06-23 Mike Frysinger <vapier@gentoo.org>
311 * armdefs.h: Always include stdint.h.
313 [!HAVE_STDINT_H]: Delete.
314 * dbg_hif.h [!__STDC__]: Delete.
316 2015-06-12 Mike Frysinger <vapier@gentoo.org>
318 * configure: Regenerate.
320 2015-06-12 Mike Frysinger <vapier@gentoo.org>
322 * configure: Regenerate.
324 2015-04-18 Mike Frysinger <vapier@gentoo.org>
326 * sim-main.h (SIM_CPU): Delete.
328 2015-04-18 Mike Frysinger <vapier@gentoo.org>
330 * sim-main.h (sim_cia): Delete.
332 2015-04-17 Mike Frysinger <vapier@gentoo.org>
334 * sim-main.h (CIA_GET, CIA_SET): Delete.
336 2015-04-17 Mike Frysinger <vapier@gentoo.org>
338 * wrapper.c (arm_pc_get, arm_pc_set): New functions.
339 (sim_open): Declare new local var i. Call CPU_PC_FETCH &
340 CPU_PC_STORE for all cpus.
342 2015-04-15 Mike Frysinger <vapier@gentoo.org>
344 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
345 * sim-main.h (STATE_CPU): Delete.
347 2015-04-13 Mike Frysinger <vapier@gentoo.org>
349 * configure: Regenerate.
351 2015-04-12 Mike Frysinger <vapier@gentoo.org>
353 * Makefile.in (SIM_OBJS): Move wrapper.o to the start of the list.
355 2015-04-06 Mike Frysinger <vapier@gentoo.org>
357 * Makefile.in (SIM_OBJS): Delete sim-engine.o.
359 2015-04-01 Mike Frysinger <vapier@gentoo.org>
361 * Makefile.in (armos.o, armcopro.o, maverick.o, iwmmxt.o, arminit.o,
362 armrdi.o, armsupp.o, thumbemu.o, bag.o, wrapper.o): Delete rules.
363 * tconfig.h: Delete file.
365 2015-03-31 Mike Frysinger <vapier@gentoo.org>
367 * config.in, configure: Regenerate.
369 2015-03-30 Mike Frysinger <vapier@gentoo.org>
371 * Makefile.in (SIM_RUN_OBJS): Delete.
372 (SIM_EXTRA_CFLAGS): Delete -DSIM_TARGET_SWITCHES and
373 -DSIM_USE_DEPRECATED_RUN_FRONTEND.
374 (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
375 * sim-main.h: New file.
376 * wrapper.c: Delete armdefs.h, sim-utils.h, and run-sim.h includes.
377 Add sim-main.h and sim-options.h includes.
378 (sim_callback, mem_size, trace): Add TODO comments.
379 (state): Delete static and add TODO comment.
380 (sim_kind, myname, big_endian): Delete.
381 (init): Change big_endian to CURRENT_TARGET_BYTE_ORDER check.
382 (sim_size, sim_trace, sim_info, sim_target_display_usage, sim_load,
383 sim_do_command, sim_set_callbacks, sim_complete_command): Delete.
384 (sim_target_parse_command_line): Mark static.
385 (free_state): New function.
386 (sim_open): Rewrite to use new common logic.
387 (sim_close): Delete body.
389 2015-03-30 Mike Frysinger <vapier@gentoo.org>
391 * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
392 * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
393 ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
394 (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.
396 2015-03-30 Mike Frysinger <vapier@gentoo.org>
398 * armemu.c [MODE32] (handle_v6_insn): Move definition.
399 (ARMul_Emulate26): Initialize do_int after label target.
400 * armemu.h (UNDEF_Test, UNDEF_Shift, UNDEF_MSRPC, UNDEF_MRSPC,
401 UNDEF_MULPCDest, UNDEF_MULDestEQOp1, UNDEF_LSRBPC,
402 UNDEF_LSRBaseEQOffWb, UNDEF_LSRBaseEQDestWb, UNDEF_LSRPCBaseWb,
403 UNDEF_LSRPCOffWb, UNDEF_LSMNoRegs, UNDEF_LSMPCBase,
404 UNDEF_LSMUserBankWb, UNDEF_LSMBaseInListWb, UNDEF_SWPPC,
405 UNDEF_CoProHS, UNDEF_MCRPC, UNDEF_LSCPCBaseWb,
406 UNDEF_UndefNotBounced, UNDEF_ShortInt, UNDEF_IllegalMode,
407 UNDEF_Prog32SigChange, UNDEF_Data32SigChange): Define to while(0).
408 * armsupp.c (ARMul_Align): Convert old style prototype.
409 * bag.c (addtolist, killwholelist): Mark static.
410 (BAG_newbag): Convert old style prototype.
411 * maverick.c (mv_compute_host_endianness): Delete.
412 * wrapper.c (verbosity, sim_set_verbose): Delete.
413 (init): Set state->verbose to 0.
415 2015-03-30 Mike Frysinger <vapier@gentoo.org>
417 * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
418 SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT,
419 SIM_AC_OPTION_INLINE, and SIM_AC_OPTION_WARNINGS.
420 * config.in, configure: Regenerate.
422 2015-03-30 Mike Frysinger <vapier@gentoo.org>
424 * Makefile.in (COPRO): Delete.
425 (SIM_OBJS): Expand COPRO.
426 * configure.ac: Deletd stdint.h check.
428 * configure: Regenerate.
430 2015-03-16 Mike Frysinger <vapier@gentoo.org>
432 * config.in, configure: Regenerate.
433 * tconfig.in: Rename file ...
434 * tconfig.h: ... here.
436 2015-03-14 Mike Frysinger <vapier@gentoo.org>
438 * Makefile.in (SIM_EXTRA_CFLAGS): Add
439 -DSIM_USE_DEPRECATED_RUN_FRONTEND.
440 (SIM_RUN_OBJS): Set to run.o.
442 2015-03-14 Mike Frysinger <vapier@gentoo.org>
444 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h.
445 * aclocal.m4, configure: Regenerate.
447 2014-08-19 Alan Modra <amodra@gmail.com>
449 * configure: Regenerate.
451 2014-08-15 Roland McGrath <mcgrathr@google.com>
453 * configure: Regenerate.
454 * config.in: Regenerate.
456 2014-03-18 Nick Clifton <nickc@redhat.com>
458 * wrapper.c: Convert function declarations to ISO C format.
459 (sim_open): Delete code for handling t,d and z command line
462 2014-03-14 Nick Clifton <nickc@redhat.com>
464 * wrapper.c (op_print): New function.
465 (sim_dis_read): New function.
466 (print_insn): New function - disassembles the given instruction.
467 (sim_trace): Note that tracing is now allowed.
468 (sim_create_inferior): Default to emulating v6.
469 Initialise the disassembler machinery.
470 (sim_target_parse_command_line): Add support for -t -d and -z
472 (sim_target_display_usage): Note existence of -d and -z options.
473 (sim_open): Parse -t -d and -z options.
474 * armemu.h: Add exports of trace, disas and trace_funcs.
475 Add prototype for print_insn.
476 * armemu.c (ARMul_Emulate26): Add tracing code.
477 Delete unused variables.
478 * thumbemu (handle_v6_thumb_insn): Delete unused variable Rd.
479 Move Rm variable into switch cases.
482 * armcopro.c (XScale_cp15_init): Add a return value.
483 (XScale_cp13_init): Likewise.
484 (XScale_cp14_init): Likewise.
485 (XScale_cp15_LDC): Delete unused function.
486 (XScale_cp15_STC): Likewise.
487 * maverick.c: Delete comment inside comment.
488 (DSPInit): Delete unused function.
489 (DSPMCR4): Fix compile time warning about missing parenthesis.
491 (DSPCDP6): Delete unused variable opcode2.
493 2014-03-14 David McQuillan <dmcq@tao-group.com>
496 * armemu.c (WriteR15Load): New function. Determines if the state
497 can be changed upon a write to R15.
498 (LoadMult): Use WriteR15Load.
499 * armemu.h (WRITEDESTB): Use WriteR15Load.
501 2014-03-10 Mike Frysinger <vapier@gentoo.org>
503 * wrapper.c (sim_do_command): Add const to cmd.
505 2014-03-05 Mike Frysinger <vapier@gentoo.org>
507 * wrapper.c (sim_load): Add const to prog.
509 2013-09-23 Alan Modra <amodra@gmail.com>
511 * configure: Regenerate.
513 2013-06-03 Mike Frysinger <vapier@gentoo.org>
515 * aclocal.m4, configure: Regenerate.
517 2013-05-07 Jayant Sonar <jayant.sonar@kpitcummins.com>
518 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
520 * armemu.c (ARMul_Emulate32): Emulate instructions MOVW and MOVT.
522 2012-12-19 Joel Brobecker <brobecker@adacore.com>
524 * COPYING: Update to GPL version 3.
526 2012-09-03 Nick Clifton <nickc@redhat.com>
529 * armsupp.c (ARMul_MRC): Return 0 if access to the MRC instruction
532 2012-08-01 Kevin Buettner <kevinb@redhat.com>
534 * wrapper.c (libiberty.h): Include.
535 (sim_store_register, sim_fetch_register): On success, return
536 length, instead of -1.
538 2012-06-15 Joel Brobecker <brobecker@adacore.com>
540 * config.in, configure: Regenerate.
542 2012-06-13 Nick Clifton <nickc@redhat.com>
544 * wrapper.c (sim_create_inferior): Treat WMMX2 binaries as iWMMXt
547 2012-05-24 Pedro Alves <palves@redhat.com>
551 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
553 2012-05-18 Nick Clifton <nickc@redhat.com>
556 * wrapper.c: Include config.h before system header files.
558 2012-03-24 Mike Frysinger <vapier@gentoo.org>
560 * aclocal.m4, config.in, configure: Regenerate.
562 2011-12-03 Mike Frysinger <vapier@gentoo.org>
564 * aclocal.m4: New file.
565 * configure: Regenerate.
567 2011-10-17 Mike Frysinger <vapier@gentoo.org>
569 * configure.ac: Change include to common/acinclude.m4.
571 2011-10-17 Mike Frysinger <vapier@gentoo.org>
573 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
574 call. Replace common.m4 include with SIM_AC_COMMON.
575 * configure: Regenerate.
577 2011-07-01 Nick Clifton <nickc@redhat.com>
580 * iwmmxt.c (WCMPGT): Sign extend 32-bit values before performing a
582 (WMAC): Extend computed result before adding to result register.
583 (WRSA): Sign extend 32-bit values before shifting.
585 2011-04-16 Mike Frysinger <vapier@gentoo.org>
587 * wrapper.c (sim_complete_command): New stub function.
589 2010-05-26 Ozkan Sezer <sezeroz@gmail.com>
591 * communicate.c (MYread_char): Check error return from accept() call
592 by its equality to -1 not by it being negative.
593 (MYread_charwait): Likewise.
594 * main.c (main): Likewise for both socket() and accept() calls.
596 2010-04-14 Mike Frysinger <vapier@gentoo.org>
598 * wrapper.c (sim_write): Add const to buffer arg.
600 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
602 * configure: Regenerate.
604 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
606 * config.in: Regenerate.
607 * configure: Likewise.
609 * configure: Regenerate.
611 2008-11-24 Joel Sherrill <joel.sherrill@oarcorp.com>
613 * arminit.c, iwmmxt.c: Include <string.h> to
615 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
617 * configure: Regenerate to track ../common/common.m4 changes.
620 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
621 Daniel Jacobowitz <dan@codesourcery.com>
622 Joseph Myers <joseph@codesourcery.com>
624 * configure: Regenerate.
625 * wrapper.c (sim_target_display_usage): Add help parameter.
627 2007-02-27 Mark Mitchell <mark@codesourcery.com>
629 * armos.c (SWIflen): Do not treate file descriptor zero as
632 2007-02-15 Nick Clifton <nickc@redhat.com>
634 * armemu.c (handle_v6_insn): Fix typo in sign extension test of
635 the sext and sxtah instructions.
637 2007-02-08 Daniel Jacobowitz <dan@codesourcery.com>
639 Reported by timeless@gmail.com:
640 * wrapper.c (sim_target_parse_arg_array): Do not return void value.
642 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
644 * acconfig.h: Remove.
645 * config.in: Regenerate.
647 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
649 * configure: Regenerated.
651 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
653 * configure: Regenerated.
655 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
657 * configure: Regenerated.
659 2006-03-07 Paul Brook <paul@codesourcery.com>
661 * elfos.c (ARMul_OSHandleSWI): Call correct function for IsTTY.
663 2006-02-01 Shaun Jackman <sjackman@gmail.com>
665 * armos.c (ARMul_OSHandleSWI): Handle the RedBoot system
666 call meminfo. Return ENOSYS for unhandled RedBoot syscalls.
668 2005-11-23 Mark Mitchell <mark@codesourcery.com>
670 * wrapper.c (gdb/signals.h): Include it.
671 (SIGTRAP): Don't define.
673 (sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.
675 2005-11-16 Shaun Jackman <sjackman@gmail.com>
677 * armos.c: Include limits.h
678 (unlink): Remove this macro. It is unused in this file and
679 conflicts with sim_callback->unlink.
680 (PATH_MAX): Define as 1024 if not already defined.
681 (ReadFileName): New function.
682 (SWIopen): Fix a potential buffer overflow.
683 (SWIremove): New function.
685 (ARMul_OSHandleSWI): Handle the RDP calls SWI_IsTTY,
686 SWI_Remove, and SWI_Rename, as well as the RDI calls
687 AngelSWI_Reason_IsTTY, AngelSWI_Reason_Remove, and
688 AngelSWI_Reason_Rename.
690 2005-09-19 Paul Brook <paul@codesourcery.com>
692 * armdefs.h: Define ARMsword and ARMsdword. Use stdint.h when
694 * armemu.c: Use them.
695 * armvirt.c (ARMul_MemoryInit): Use correct type for size.
696 * configure.ac: Check for stdint.h.
697 * config.in: Regenerate.
698 * configure: Regenerate.
700 2005-05-24 Nick Clifton <nickc@redhat.com>
702 * thumbemu.c (handle_v6_thumb_insn): New function.
703 (ARMul_ThumbDecode): Call handle_v6_thumb_insn() when an undefined
704 instruction binary is encountered.
706 2005-05-12 Nick Clifton <nickc@redhat.com>
708 * Update the address and phone number of the FSF organization in
709 the GPL notices in the following files:
710 COPYING, Makefile.in, armcopro.c, armdefs.h, armemu.c,
711 armemu.h, armfpe.h, arminit.c, armopts.h, armos.c, armos.h,
712 armrdi.c, armsupp.c, armvirt.c, bag.c, bag.h, communicate.c,
713 communicate.h, dbg_conf.h, dbg_cp.h, dbg_hif.h, dbg_rdi.h,
714 gdbhost.c, gdbhost.h, iwmmxt.c, iwmmxt.h, kid.c, main.c,
715 maverick.c, parent.c, thumbemu.c, wrapper.c
717 2005-04-20 Nick Clifton <nickc@redhat.com>
719 * armemu.c (handle_v6_insn): New function - emulate a few of the
720 v6 instructions - the ones now generated by GCC.
721 (ARMulEmulate32): Call handle_v6_insn when a possible v6 insn is
723 * armdefs.h (struct ARMul_State): Add new field: is_v6.
724 (ARM_v6_Prop): Define.
725 * arminit.c (ARMul_NewState): Initialise the v6 flag.
726 (ARMul_SelectProcessor): Determine if the v6 flag should be
728 * wrapper.c (sim_create_inferior): For unknown architectures,
729 default to allowing the v6 instructions.
731 2005-04-18 Nick Clifton <nickc@redhat.com>
733 * iwmmxt.c (WMAC, WMADD): Move casts from the LHS of an assignment
735 (WSLL, WSRA, WSRL, WUNPCKEH, WUNPACKEL): Use ULL suffix to
736 indicate an unsigned long long constant.
738 2005-03-23 Mark Kettenis <kettenis@gnu.org>
740 * configure: Regenerate.
742 2005-01-14 Andrew Cagney <cagney@gnu.org>
744 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
745 explicit call to AC_CONFIG_HEADER.
746 * configure: Regenerate.
748 2005-01-12 Andrew Cagney <cagney@gnu.org>
750 * configure.ac: Update to use ../common/common.m4.
751 * configure: Re-generate.
753 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
755 * configure: Regenerated to track ../common/aclocal.m4 changes.
757 2005-01-07 Andrew Cagney <cagney@gnu.org>
759 * configure.ac: Rename configure.in, require autoconf 2.59.
760 * configure: Re-generate.
762 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
764 * configure: Regenerate for ../common/aclocal.m4 update.
766 2004-06-28 Andrew Cagney <cagney@gnu.org>
768 * armemu.c: Rename ui_loop_hook to deprecated_ui_loop_hook.
770 2003-12-29 Mark Mitchell <mark@codesourcery.com>
772 * armos.c (fcntl.h): Do not include it.
773 (O_RDONLY): Do not define.
774 (O_WRONLY): Likewise.
776 (targ-vals.h): Include it.
777 (translate_open_mode): Use TARGET_O_* instead of O_*.
779 * Makefile.in (armos.o): Depend on targ-vals.h.
781 2003-04-13 Nick Clifton <nickc@redhat.com>
783 * armvirt.c (GetWord): Only call XScale_check_memacc if in XScale
787 2003-03-30 Nick Clifton <nickc@redhat.com>
789 * configure.in (CON_FLAGS): Remove.
790 (COPRO): Unconditionally include iwmmxt.o.
791 * configure: Regenerate.
792 * Makefile.in (CON_FLAGS): Remove.
793 * armcopro.c: Remove use of __IWMMXT__ flag.
794 * wrapper.c: Likewise.
795 * armemu.c: Likewise.
796 Add explanatory comment for suppressed code.
798 2003-03-27 Nick Clifton <nickc@redhat.com>
800 * armos.c (ARMul_OsHandleSWI): Catch SWIs for unhandled vectors.
802 2003-03-27 Nick Clifton <nickc@redhat.com>
804 * configure.in: (CON_FLAGS): Define and intialise.
805 (COPRO): Add iwmmxt.o if configuring for XScale.
806 * configure: Regenerate.
807 * Makefile.in (iwmmxt.o): Add rule to build.
809 (ALL_FLAGS): Add CON_FLAGS.
810 * armcopro.c (ARMul_CoProInit): Initialise iWMMXt coprocessors.
811 * armdefs.h (struct ARMul_State): Add 'is_iWMMXt' field.
812 (ARM_iWMMXt_Prop): Define.
813 * armemu.c (ARMul_Emulate16): Intercept iWMMXt instructions and
815 * arminit.c (ARMul_NewState): Initialise 'is_iWMMXt'.
816 (ARMul_Abort): Catch branches through uninitialised vectors.
817 * armos.c (softevtorcode): Update comment.
818 (ARMul_OsInit): Use ARMUndefinedInstrV.
819 * wrapper.c (sim_create_inferior): Handle iWMMXt processor type.
820 (sim_store_register): Handle iWMMXt registers.
821 (sim_fetch_register): Handle iWMMXt registers.
822 * iwmmxt.h: New file. Exported iWMMXt coprocessor emulator
824 * iwmmxt.c: New file: iWMMXt emulator.
826 2003-03-20 Nick Clifton <nickc@redhat.com>
828 * Contribute support for Cirrus Maverick ARM co-processor,
829 written by Aldy Hernandez <aldyh@redhat.com> and
830 Andrew Cagney <cagney@redhat.com>:
832 * maverick.c: New file: Support for Maverick floating point
834 * Makefile.in: Add maverick.o target.
835 * configure.in (COPRO): Add maverick.o.
836 * configure: Regenerate.
837 * armcopro.c (ARMul_CoProInit): Only initialise co-processors
838 available on target processor. Add code to initialse Maverick
839 co-processor support code.
840 * armdefs.h (ARMul_state): Add is_ep9312 field.
841 (ARM_ep9312_Prop): Define.
842 * armemu.h: Add prototypes for Maverick co-processor
844 * arminit.c (ARMul_SelectProcessor): Initialise the
845 co-processor support once the chip has been selected.
846 * wrapper.c: Add support for Maverick co-processor.
847 (init): Do not call ARMul_CoProInit. Delays this until the
848 chip has been selected.
850 2003-03-02 Nick Clifton <nickc@redhat.com>
852 * armos.c (SWIWrite0): Catch big-endian bug when printing
855 2003-02-27 Andrew Cagney <cagney@redhat.com>
857 * wrapper.c (sim_create_inferior, sim_open): Rename _bfd to bfd.
859 2003-01-10 Ben Elliston <bje@redhat.com>
861 * README.Cygnus: Rename from this ..
862 * README: .. to this.
864 2002-09-27 Andrew Cagney <ac131313@redhat.com>
866 * wrapper.c (sim_open): Add support for -m<mem-size>.
867 (mem_size): Reduce to 2MB.
870 2002-08-15 Nick Clifton <nickc@redhat.com>
872 * armos.c (ARMul_OSHandleSWI): Catch and ignore SWIs of -1, they
873 can be caused by an interrupted system call being resumed by GDB.
875 2002-07-05 Nick Clifton <nickc@cambridge.redhat.com>
877 * armemu.c (ARMul_Emulate32): Add more tests for valid MIA, MIAPH
878 and MIAxy instructions.
880 2002-06-21 Nick Clifton <nickc@cambridge.redhat.com>
882 * armos.h (ADP_Stopped_RunTimeError): Set correct value.
884 2002-06-16 Andrew Cagney <ac131313@redhat.com>
886 * configure: Regenerated to track ../common/aclocal.m4 changes.
888 2002-06-12 Andrew Cagney <ac131313@redhat.com>
890 * Makefile.in: Update copyright.
891 (wrapper.o): Specify dependencies.
892 * wrapper.c: Include "gdb/sim-arm.h".
893 (sim_store_register, sim_fetch_register): Rewrite using `enum
894 arm_sim_regs' and a switch.
896 2002-06-09 Andrew Cagney <cagney@redhat.com>
898 * wrapper.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
899 * armos.c: Include "gdb/callback.h".
901 2002-05-29 Nick Clifton <nickc@cambridge.redhat.com>
903 * armcopro.c (XScale_check_memacc): Set the FSR and FAR registers
904 if a Data Abort is detected.
906 2002-05-27 Nick Clifton <nickc@cambridge.redhat.com>
908 * armvirt.c (GetWord): Only perform access checks if 'check'
911 * wrapper.c (sim_create_inferior): Report unknown machine
913 * thumbemu.c (ARMul_ThumbDecode, Case 31): Do not set LR to pc +
914 2, it has already been advanced.
916 2002-05-23 Nick Clifton <nickc@cambridge.redhat.com>
918 * thumbemu.c (ARMul_ThumbDecode): When decoding a BLX(1)
919 instruction do not add in the second bit of the base address -
920 this has already been accounted for.
922 2002-05-21 Nick Clifton <nickc@cambridge.redhat.com>
924 * armcopro.c (check_cp13_access): Allow access to register 1 when
926 (write_cp13_reg): Allow bit 0 of reg 1 of CRm 1 to be written to.
928 2002-05-17 Nick Clifton <nickc@cambridge.redhat.com>
930 * Makefile.in (SIM_TARGET_SWITCHES): Define.
931 * armos.c (swi_mask): Define. Initialise to supporting all
933 (ARMul_OSInit): For XScale targets, only support the ANGEL
934 SWI interface. (This is at the request if Intel).
935 (ARMul_OSHandleSWI): Examine swi_mask to see if a particular
936 SWI call should be emulated.
937 Do not fall through from AngelSWI_Reason_WriteC.
938 Propagate exit code from RedBoot Exit SWI.
939 * rdi-dgb.h (swi_mask): Prototype.
940 (SWI_MASK_DEMON, SWI_MASK_ANGEL, SWI_MASK_REDBOOT): Define.
941 * wrapper.c (sim_target_parse_command_line): New function.
942 Look for and handle --swi-support switch.
943 (sim_target_parse_arg_array): New function. Process an argv
944 array for parsing by sim_target_parse_command_line.
945 (sim_target_display_usage): New function. Describe syntax of
946 --swi-suppoort switch.
947 (sim_open): Add call to sim_target_parse_arg_array).
949 2002-05-09 Nick Clifton <nickc@cambridge.redhat.com>
951 * armos.c (ARMul_OSHandleSWI): Support the RedBoot SWI in ARM
952 mode and some of its system calls.
954 2002-03-17 Anthony Green <green@redhat.com>
956 * wrapper.c (mem_size): Increase the default target memory to 8MB.
958 2002-02-21 Keith Seitz <keiths@redhat.com>
960 * armos.c (SWIWrite0): Use generic host_callback mechanism
961 for supported OS functions "open", "close", "write", etc.
964 (SWIwrite): Likewise.
966 (ARMul_OSHandleSWI): Likewise.
968 2002-02-05 Nick Clifton <nickc@cambridge.redhat.com>
970 * wrapper.c (sim_create_inferior): Modify previous patch so that
971 it is only triggered for COFF format executables.
973 2002-02-04 Nick Clifton <nickc@cambridge.redhat.com>
975 * wrapper.c (sin_create_inferior): If a v5 architecture is
976 detected, assume it might be an XScale binary, since there is no
977 way to distinguish between the two in the COFF file format.
979 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
981 * arminit.c (ARMul_Abort): Fix parameters passed to CPRead[13].
982 * armemu.c (ARMul_Emulate32): Fix parameters passed to CPRead[13]
984 Fix formatting. Improve layout.
985 * armemu.h: Fix formatting. Improve layout.
987 2002-01-09 Nick Clifton <nickc@cambridge.redhat.com>
989 * wrapper.c (sim_fetch_register): If fetching more than 4 bytes
990 return zeroes in the other words.
991 General formatting tidy ups.
993 2001-11-16 Ben Harris <bjh21@netbsd.org>
995 * Makefile.in (armemu32.o): Replace $< with autoconf recommended
999 2001-10-18 Nick Clifton <nickc@cambridge.redhat.com>
1001 * armemu.h (CP_ACCESS_ALLOWED): New macro.
1003 * armcopro.c (read_cp14_reg): Make static.
1004 (write_cp14_reg): Make static.
1005 (check_cp13_access): Use CP_ACCESS_ALLOWED macro.
1007 * armsupp.c (ARMul_LDC): Check CP_ACCESS_ALLOWED.
1008 (ARMul_STC): Check CP_ACCESS_ALLOWED.
1009 (ARMul_MCR): Check CP_ACCESS_ALLOWED.
1010 (ARMul_MRC): Check CP_ACCESS_ALLOWED.
1011 (ARMul_CDP): Check CP_ACCESS_ALLOWED.
1013 * armemu.c (MCRR): Check CP_ACCESS_ALLOWED. Test Rd and Rn not
1015 (MRRC): Check CP_ACCESS_ALLOWED. Test Rd and Rn not equal to 15.
1018 2001-05-11 Nick Clifton <nickc@cambridge.redhat.com>
1020 * armemu.c (ARMul_Emulate32): Fix handling of XScale LDRD and STRD
1021 instructions with post indexed addressing modes.
1023 2001-05-08 Jens-Christian Lache <lache@tu-harburg.de>
1025 * armsupp.c (ARMul_FixCPSR): Check Mode not Bank in order to
1026 determine rocesor mode.
1028 2001-04-18 matthew green <mrg@redhat.com>
1030 * armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
1031 (read_cp15_reg): Make non-static.
1032 (XScale_cp15_LDC): Update for write_cp15_reg() change.
1033 (XScale_cp15_MCR): Likewise.
1034 (XScale_cp15_write_reg): Likewise.
1035 (XScale_check_memacc): New function. Check for breakpoints being
1036 activated by memory accesses. Does not support the Branch Target
1038 (XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
1039 (XScale_debug_moe): New function. Set the debug Method Of Entry,
1041 (write_cp14_reg): Reset count counter if requested.
1042 * armdefs.h (struct ARMul_State): New members `LastTime' and
1043 `CP14R0_CCD' used for the timer/counters.
1044 (ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
1045 ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
1046 ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
1047 ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
1048 ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
1049 ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
1050 ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
1051 ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
1052 defines for XScale registers.
1053 (XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
1054 (ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
1055 (ARMul_Emulate32): Handle the clock counter and hardware instruction
1056 breakpoints. Call XScale_set_fsr_far() for software breakpoints and
1057 software interrupts.
1058 (LoadMult): Call XScale_set_fsr_far() for data aborts.
1059 (LoadSMult): Likewise.
1060 (StoreMult): Likewise.
1061 (StoreSMult): Likewise.
1062 * armemu.h (write_cp15_reg): Update prototype.
1063 * arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
1064 (ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
1066 * armvirt.c (GetWord): Call XScale_check_memacc().
1067 (PutWord): Likewise.
1069 2001-03-20 Nick Clifton <nickc@redhat.com>
1071 * armvirt.c (ARMul_ReLoadInstr): Do not enable alignment checking
1072 when loading unaligned thumb instructions.
1074 2001-03-06 Nick Clifton <nickc@redhat.com>
1076 * thumbemu.c (ARMul_ThumbDecode): Delete label bo_blx2.
1077 Compute destination address of BLX(1) instruction by
1078 taking bit 1 from PC and not from bit 0 of the offset.
1080 2001-02-27 Nick Clifton <nickc@redhat.com>
1082 * armvirt.c (GetWord): Add new parameter - check - to enable or
1083 disable the alignment checking.
1084 (PutWord): Add new parameter - check - to enable or disable the
1086 (ARMul_ReLoadInstr): Pass extra parameter to GetWord.
1087 (ARMul_ReadWord): Pass extra parameter to GetWord.
1088 (ARMul_WriteWord): Pass extra parameter to PutWord.
1089 (ARMul_StoreHalfWord): Pass extra parameter to PutWord.
1090 (ARMul_WriteByte): Pass extra parameter to GetWord.
1091 (ARMul_SwapWord): Pass extra parameter to PutWord.
1092 (ARMul_SafeReadByte): New Function: Read a byte but do not abort.
1093 (ARMul_SafeWriteByte): New Function: Write a byte but do not abort.
1095 * armdefs.h: Add prototypes for ARMul_SafeReadByte and
1096 ARMul_SafeWriteByte.
1098 * wrapper.c (sim_write): Use ARMul_SafeWriteByte.
1099 (sim_read): Use ARMul_SafeReadByte.
1101 * armos.c (in_SWI_handler): Remove.
1102 (SWIWrite0): Use ARMul_SafeReadByte.
1103 (WriteCommandLineTo): Use ARMul_SafeWriteByte.
1104 (SWIopen): Use ARMul_SafeReadByte.
1105 (SWIread): Use ARMul_SafeWriteByte.
1106 (SWIwrite): Use ARMul_SafeReadByte.
1107 (ARMul_OSHandleSWI): Remove use of is_SWI_handler.
1108 (ARMul_OSException): Remove use of is_SWI_handler.
1110 2001-02-16 Nick Clifton <nickc@redhat.com>
1112 * armemu.c: Remove Prefetch abort for breakpoints. Instead set
1113 the state to RESUME.
1115 2001-02-14 Nick Clifton <nickc@redhat.com>
1117 * armemu.c: Add code to preserve processor mode when a prefetch
1118 abort is signalled after processing a breakpoint.
1120 * wrapper.c (sim_create_inferior): Reset processor into ARM mode
1121 for any machine type except the early ARMs.
1123 2001-02-13 Nick Clifton <nickc@redhat.com>
1125 * armos.c (in_SWI_handler): New static variable.
1126 (ARMul_OSHandleSWI): Set in_SWI_handler whilst emulating a SWI.
1127 (ARMul_OSException): Ignore exceptions generated whilst emulating
1130 2001-02-12 Nick Clifton <nickc@redhat.com>
1132 * armemu.h (NEGBRANCH): Fix defintion.
1134 2001-02-01 Nick Clifton <nickc@redhat.com>
1136 * armemu.c (LoadSMult): Update base address register after
1137 restoring register bank.
1138 (StoreMult): Update base address register after restoring register
1141 2001-01-31 Nick Clifton <nickc@redhat.com>
1143 * armvirt.c (PutWord): Detect installation of SWI vector.
1144 (SWI_vector_installed): Define.
1145 * armos.c (ARMul_OsInit): Reset SWI_vector_installed.
1146 * armos.h (SWI_vector_installed): Declare.
1147 * wrapper.c (SWI_vector_installed): Remove definition.
1148 (sim_write): Remove check of SWI vector installation
1150 2000-12-18 Nick Clifton <nickc@redhat.com>
1152 * armemu.c (ARMul_Emulate26): Fix test for StoreDouble
1155 2000-12-10 Nick Clifton <nickc@redhat.com>
1157 * armos.c (ARMul_OSHandleSWI): Add 0x91 as an FPE SWI.
1159 2000-12-07 Nick Clifton <nickc@redhat.com>
1161 * armemu.c (ARMul_Emulate26): Detect double word load and
1162 store instructions and call emulation routines.
1163 (Handle_Load_Double): Emulate a double word load instruction.
1164 (Handle_Store_Double): Emulate a double word store
1167 2000-12-03 Nick Clifton <nickc@redhat.com>
1169 * armos.c: Fix formatting.
1170 (ARMul_OSHandleSWI): Suppress support of DEMON SWIs when in xscale
1173 2000-11-29 Nick Clifton <nickc@redhat.com>
1175 * armdefs.h (State): Add 'v5e' and 'xscale' fields.
1176 (ARM_v5e_Prop): Define.
1177 (ARM_XScale_Prop): Define.
1179 * wrapper.c (sim_create_inferior): Select processor based on
1181 (SWI_vector_installed): New boolean. Set to true if the SWI
1182 vector address is written to by the executable.
1184 * arminit.c (ARMul_NewState): Switch default to 32 bit mode.
1185 (ARMul_SelectProcessor): Initialise v5e and xscale signals.
1186 (ARMul_Abort): Fix calculation of LR address.
1188 * armos.c (ARMul_OSHandleSWI): If a SWI vector has been installed
1189 and a SWI is not handled by the simulator, pass the SWI off to the
1190 vector, otherwise issue a warning message and continue.
1192 * armsupp.c (ARMul_CPSRAltered): Set S bit aswell.
1194 * thumbemu.c: Add v5 instruction simulation.
1195 * armemu.c: Add v5, XScale and El Segundo instruction simulation.
1197 * armcopro.c: Add XScale co-processor emulation.
1198 * armemu.h: Add exported XScale co-processor functions.
1200 2000-09-15 Nick Clifton <nickc@redhat.com>
1202 * armdefs.h: Rename StrongARM property to v4_ARM and add v5 ARM
1203 property. Delete unnecessary processor names.
1204 (ARM_Strong_Prop): Delete.
1205 (STRONGARM): Delete.
1208 (State): Delete is_StrongARM boolean. Add is_v4 and is_v5
1211 * armemu.h (BUSUSEDINCPCS): Use is_v4 boolean.
1212 (BUSUSEDINCPCN): Use is_v4 boolean.
1214 * arminit.c (ARMul_NewState): Initialise is_v4 and is_v5 fields.
1215 (ARMul_SelectProcessor): Change second parameter from 'processor'
1216 to 'properties'. Set is_v4 and is_v5 booleans in State.
1218 * armrdi.c: Remove use of ARM processor names. Replace with ARM
1219 processor properties.
1221 * wrapper.c (sim_create_inferior): Choose properties passed to
1222 ARMul_SelectProcessor based on machine number.
1224 2000-08-14 Nick Clifton <nickc@redhat.com>
1226 * armemu.c (LHPOSTDOWN): Compute write back value before
1227 performing load in case the offset register is overwritten.
1230 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
1232 * wrapper.c (sim_create_inferior): Fix typo in the previous patch.
1234 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
1236 * wrapper.c (sim_create_inferior): Reset mode to ARM when creating a
1239 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1241 * armvirt.c (ABORTS): Do not define.
1243 * armdefs.h (struct ARMul_State): Add is_StrongARM.
1244 (ARM_Strong_Prop, STRONGARM): Define.
1245 * arminit.c (ARMul_NewState): Reset is_StrongARM.
1246 (ARMul_SelectProcessor): Set is_StrongARM.
1247 * wrapper.c (sim_create_inferior): Use bfd machine type to
1248 determine processor type to emulate.
1249 * armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
1250 when emulating StrongARM.
1252 * armemu.c (ARMul_Emulate, t_undefined): Proceed to next insn.
1254 * armemu.h (INSN_SIZE): New macro.
1255 (SET_ABORT): Save CPSR in SPSR and set LR.
1256 * armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
1257 (WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
1258 * arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
1260 * armemu.c (LoadSMult): Use WriteR15() to discard the least
1261 significant bits of PC.
1263 * armemu.h (WRITEDESTB): New macro.
1264 * armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
1265 modify PC. Moved the existing logic...
1266 (WriteR15Branch): ... here. New function.
1267 (WriteR15, WriteSR15): Drop the two least significant bits.
1268 (LoadSMult): Use WriteR15Branch() to modify PC.
1269 (LoadMult): Use WRITEDESTB() instead of WRITEDEST().
1271 * armemu.h (GETSPSR): Call ARMul_GetSPSR().
1272 * armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
1273 extracted from state->Cpsr, but preserve the unused bits.
1274 (ARMul_GetCPSR): Get bits preserved in state->Cpsr.
1275 (ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
1276 get the full CPSR word.
1278 * armemu.h (PSR_FBITS, PSR_SBITS, PSR_XBITS, PSR_CBITS): New.
1279 (SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
1280 (SETPSR, SET_INTMODE, SETCC): Removed.
1281 * armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
1282 mask. Use SETPSR_* to modify PSR.
1283 (ARMul_SetCPSR): Load all bits from value.
1284 * armemu.c (ARMul_Emulate, msr): Do not test bit mask.
1286 * armemu.c (ARMul_Emulate): Compute writeback value before
1287 loading, since the offset register may be the destination
1290 * armdefs.h (SYSTEMBANK): Define as USERBANK.
1291 * armsupp.c (ARMul_SwitchMode): Remove SYSTEMBANK cases.
1293 2000-06-22 Alexandre Oliva <aoliva@cygnus.com>
1295 * armemu.c (Multiply64): Fix computation of flag N.
1297 * armemu.c (MultiplyAdd64): Fix computation of flag N.
1299 2000-06-20 Alexandre Oliva <aoliva@cygnus.com>
1301 * armemu.h (NEGBRANCH): Do not overwrite the two most significant
1304 2000-05-25 Nick Clifton <nickc@cygnus.com>
1306 * armcopro.c (MMUMCR): Only indicate mode change if a singal has
1308 (MMUWrite): Only indicate mode change if a singal has really
1311 * armdefs.h (SYSTEMMODE): Define.
1312 (BANK_CAN_ACEESS_SPSR): Define.
1314 * armemu.c (ARM_Emulate26): If the mode has changed allow the PC
1315 to advance before stopping the emulation.
1317 * arminit.c (ARMul_Reset): Ensure Mode field of State is set
1320 * armos.c (ARMul_OSInit): Create a initial stack pointer for
1323 * armsupp.c (ModeToBank): Remove unused first parameter.
1324 Add support for System Mode.
1325 (ARMul_GetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1326 (ARMul_SetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1327 (ARMul_FixSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1328 (ARMulSwitchMode): Add support for System Mode.
1330 Wed May 24 14:40:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
1332 * configure: Regenerated to track ../common/aclocal.m4 changes.
1334 2000-05-23 Nick Clifton <nickc@cygnus.com>
1336 * wrapper.c (sim_store_register): Special handling for CPSR
1339 2000-03-11 Philip Blundell <philb@gnu.org>
1341 * armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
1342 Patch from Allan Skillman <Allan.Skillman@arm.com>.
1344 Wed Mar 22 15:24:21 2000 glen mccready <gkm@pobox.com>
1346 * wrapper.c (sim_open,sim_close): Copy into myname, free myname.
1348 2000-02-08 Nick Clifton <nickc@cygnus.com>
1350 * wrapper.c: Fix compile time warning messages.
1351 * armcopro.c: Fix compile time warning messages.
1352 * armdefs.h: Fix compile time warning messages.
1353 * armemu.c: Fix compile time warning messages.
1354 * armemu.h: Fix compile time warning messages.
1355 * armos.c: Fix compile time warning messages.
1356 * armsupp.c: Fix compile time warning messages.
1357 * armvirt.c: Fix compile time warning messages.
1358 * bag.c: Fix compile time warning messages.
1360 2000-02-02 Bernd Schmidt <bernds@cygnus.co.uk>
1362 * *.[ch]: Use indent to make readable.
1364 1999-11-22 Nick Clifton <nickc@cygnus.com>
1366 * armos.c (SWIread): Generate an error message if a huge read is
1368 (SWIwrite): Generate an error message if a huge write is
1371 1999-10-27 Nick Clifton <nickc@cygnus.com>
1373 * thumbemu.c (ARMul_ThumbDecode): Accept 0xbebe as a thumb
1376 1999-10-08 Ulrich Drepper <drepper@cygnus.com>
1378 * armos.c (SWIopen): Always pass third parameter with 0666 since
1379 otherwise uninitialized memory gets access if the O_CREAT bit is
1380 set and so we possibly cannot access the file afterwards.
1382 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1384 * armos.c (SWIWrite0): Send output to stdout instead of stderr.
1385 (ARMul_OSHandleSWI, case SWI_WriteC,AngelSWI_Reason_WriteC): Ditto.
1387 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
1389 * configure: Regenerated to track ../common/aclocal.m4 changes.
1391 1999-05-08 Felix Lee <flee@cygnus.com>
1393 * configure: Regenerated to track ../common/aclocal.m4 changes.
1395 1999-04-06 Keith Seitz <keiths@cygnus.com>
1397 * wrapper.c (stop_simulator): New global.
1398 (sim_stop): Set sim state to STOP and set
1400 (sim_resume): Reset stop_simulator.
1401 (sim_stop_reason): If stop_simulator is set, tell gdb
1402 that the we took SIGINT.
1403 * armemu.c (ARMul_Emulate26): Don't loop forever. Stop if
1404 stop_simulator is set.
1406 1999-04-02 Keith Seitz <keiths@cygnus.com>
1408 * armemu.c (ARMul_Emulate26): If NEED_UI_LOOP_HOOK, call ui_loop_hook
1409 whenever the counter expires.
1410 * Makefile.in (SIM_EXTRA_CFLAGS): Include define NEED_UI_LOOP_HOOK.
1412 1999-03-24 Nick Clifton <nickc@cygnus.com>
1414 * armemu.c (ARMul_Emulate26): Handle new breakpoint value.
1415 * thumbemu.c (ARMul_ThumbDecode): Handle new breakpoint value.
1417 Mon Sep 14 09:00:05 1998 Nick Clifton <nickc@cygnus.com>
1419 * wrapper.c (sim_open): Set endianness according to BFD or command
1422 * tconfig.in: Define SIM_HAVE_BIENDIAN.
1424 Thu Aug 27 11:00:05 1998 Nick Clifton <nickc@cygnus.com>
1426 * armemu.c (Multiply64): Test for Rm (rather than Rs) not being
1427 the same as either RdHi or RdLo.
1429 Thu Jul 2 10:24:35 1998 Nick Clifton <nickc@cygnus.com>
1431 * armos.c (ARMul_OSHandleSWI: AngelSWI_Reason_ReportException):
1432 Set Reg[0] based on reason for for the exception.
1434 Thu Jun 4 15:22:03 1998 Jason Molenda (crash@bugshack.cygnus.com)
1436 * armos.c (SWIwrite0): New function.
1437 (WriteCommandLineTo): New function.
1438 (SWIopen): New function.
1439 (SWIread): New function.
1440 (SWIwrite): New function.
1441 (SWIflen): New function.
1442 (ARMul_OSHandleSWI): Call new functions instead of handling
1444 (ARMul_OSHandleSWI): Handle Angel SWIs correctly.
1445 (*): Reformat spacing to be a bit more GNUly.
1446 Most code taken from a patch by Anthony Thompson
1447 (athompso@cambridge.arm.com)
1449 Tue Jun 2 15:22:22 1998 Nick Clifton <nickc@cygnus.com>
1451 * armos.h: Add Angel SWI and its reason codes.
1452 * armos.c (ARMul_OSHandleSWI): Ignore Angel SWIs (for now).
1454 Mon Jun 1 17:14:19 1998 Anthony Thompson (athompso@cambridge.arm.com)
1456 * armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
1457 of ":tt" to catch stdin in addition to stdout.
1458 (ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
1459 or success of lseek().
1461 Wed May 20 17:36:25 1998 Nick Clifton <nickc@cygnus.com>
1463 * armos.c (ARMul_OSHandleSWI): Special case code to catch attempts
1466 Wed Apr 29 15:29:55 1998 Jeff Johnston <jjohnstn@cygnus.com>
1468 * armos.c (ARMul_OSHandleSWI): Added code for SWI_Clock,
1469 SWI_Flen, and SWI_Time. Also fixed SWI_Seek code to only
1470 seek from offset 0 and not to use R2 for whence since it is
1471 not passed as part of the SWI call.
1473 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
1475 * configure: Regenerated to track ../common/aclocal.m4 changes.
1477 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
1479 * configure: Regenerated to track ../common/aclocal.m4 changes.
1482 Sun Apr 26 15:20:26 1998 Tom Tromey <tromey@cygnus.com>
1484 * acconfig.h: New file.
1485 * configure.in: Reverted change of Apr 24; use sinclude again.
1487 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
1489 * configure: Regenerated to track ../common/aclocal.m4 changes.
1492 Fri Apr 24 11:20:19 1998 Tom Tromey <tromey@cygnus.com>
1494 * configure.in: Don't call sinclude.
1496 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
1498 * configure: Regenerated to track ../common/aclocal.m4 changes.
1500 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
1502 * configure: Regenerated to track ../common/aclocal.m4 changes.
1504 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
1506 * configure: Regenerated to track ../common/aclocal.m4 changes.
1508 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
1510 * configure: Regenerated to track ../common/aclocal.m4 changes.
1512 Tue Mar 10 09:26:38 1998 Nick Clifton <nickc@cygnus.com>
1514 * armopts.h: Remove definition of LITTLEND - it is not used.
1516 Tue Feb 17 12:35:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1518 * wrapper.c (sim_store_register, sim_fetch_register): Pass in
1519 length parameter. Return -1.
1521 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
1523 * configure: Regenerated to track ../common/aclocal.m4 changes.
1525 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
1527 * configure: Regenerated to track ../common/aclocal.m4 changes.
1529 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
1531 * configure: Regenerated to track ../common/aclocal.m4 changes.
1533 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
1535 * configure: Regenerated to track ../common/aclocal.m4 changes.
1538 Tue Dec 9 11:30:48 1997 Nick Clifton <nickc@cygnus.com>
1540 * Makefile.in: Updated with changes from branch.
1542 * armemu.c: ditto these changes
1543 * armemu.h: ditto add support for
1544 * armos.c: ditto the Thumb instruction
1545 * armsupp.c: ditto set and the new v4
1546 * armvirt.c: ditto architecture.
1548 * thumbemu.c: New file from branch.
1551 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
1553 * configure: Regenerated to track ../common/aclocal.m4 changes.
1555 Thu Oct 30 13:54:06 1997 Nick Clifton <nickc@cygnus.com>
1557 * armos.c (ARMul_OSHandleSWI): Add support for GetEnv SWI. Patch
1558 from Tony Thompson at ARM: athompso@arm.com
1560 * wrapper.c (sim_create_inferior): Add code to create an execution
1561 environment. Patch from Tony Thompson at ARM: athompso@arm.com
1563 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1565 * wrapper.c (sim_load): Pass lma_p and sim_write args to
1568 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1570 * configure: Regenerated to track ../common/aclocal.m4 changes.
1572 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
1574 * configure: Regenerated to track ../common/aclocal.m4 changes.
1576 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1578 * configure: Regenerated to track ../common/aclocal.m4 changes.
1580 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1582 * configure: Regenerated to track ../common/aclocal.m4 changes.
1584 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1586 * configure: Regenerated to track ../common/aclocal.m4 changes.
1588 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1590 * configure: Regenerated to track ../common/aclocal.m4 changes.
1592 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1594 * configure: Regenerated to track ../common/aclocal.m4 changes.
1596 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1598 * configure: Regenerated to track ../common/aclocal.m4 changes.
1601 Tue Aug 26 10:37:27 1997 Andrew Cagney <cagney@b1.cygnus.com>
1603 * wrapper.c (sim_kill): Delete.
1604 (sim_create_inferior): Add ABFD argument.
1605 (sim_load): Move setting of PC from here.
1606 (sim_create_inferior): To here.
1608 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1610 * configure: Regenerated to track ../common/aclocal.m4 changes.
1613 Mon Aug 25 15:35:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
1615 * wrapper.c (sim_open): Add ABFD argument.
1617 Tue May 20 10:13:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
1619 * wrapper.c (sim_open): Add callback argument.
1620 (sim_set_callbacks): Drop SIM_DESC argument.
1622 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1624 * configure: Regenerated to track ../common/aclocal.m4 changes.
1626 Fri Apr 18 13:32:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1628 * wrapper.c (sim_stop): Stub sim_stop function.
1630 Thu Apr 17 18:33:01 1997 Fred Fish <fnf@cygnus.com>
1632 * arminit.c (ARMul_NewState): Preinitialize the state to
1635 Thu Apr 17 02:39:02 1997 Doug Evans <dje@canuck.cygnus.com>
1637 * Makefile.in (SIM_OBJS): Add sim-load.o.
1638 * wrapper.c (sim_kind,myname): New static locals.
1639 (sim_open): Set sim_kind, myname.
1640 (sim_load): Call sim_load_file to do work. Set start address from bfd.
1641 (sim_create_inferior): Return SIM_RC. Delete start_address arg.
1643 Thu Apr 17 11:48:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1645 * wrapper.c (sim_trace): Update so that it matches prototype.
1647 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1649 * configure: Regenerated to track ../common/aclocal.m4 changes.
1652 Mon Apr 7 12:01:17 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1654 * Makefile.in (armemu32.o): Replace $< with autoconf recommended
1656 (armemu26.o): Ditto.
1658 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1660 * wrapper.c (sim_open): New arg `kind'.
1662 * configure: Regenerated to track ../common/aclocal.m4 changes.
1664 Wed Apr 2 14:50:44 1997 Ian Lance Taylor <ian@cygnus.com>
1666 * COPYING: Update FSF address.
1668 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1670 * configure: Regenerated to track ../common/aclocal.m4 changes.
1672 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1674 * configure: Regenerated to track ../common/aclocal.m4 changes.
1676 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1678 * configure: Re-generate.
1680 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1682 * configure: Regenerate to track ../common/aclocal.m4 changes.
1684 Thu Mar 13 12:38:56 1997 Doug Evans <dje@canuck.cygnus.com>
1686 * wrapper.c (sim_open): Has result now.
1687 (sim_*): New SIM_DESC argument.
1689 Tue Feb 4 13:22:21 1997 Doug Evans <dje@canuck.cygnus.com>
1691 * Makefile.in (@COMMON_MAKEFILE_FRAG@): Use
1692 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1693 * configure.in: sinclude ../common/aclocal.m4.
1694 * configure: Regenerated.
1696 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1698 * configure configure.in Makefile.in: Update to new configure
1699 scheme which is more compatible with WinGDB builds.
1700 * configure.in: Improve comment on how to run autoconf.
1701 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1702 * Makefile.in: Use autoconf substitution to install common
1705 Wed Nov 20 01:05:10 1996 Doug Evans <dje@canuck.cygnus.com>
1707 * run.c: Deleted, use one in ../common now.
1708 * Makefile.in: Delete everything that's been moved to
1709 ../common/Make-common.in.
1711 * configure.in: Simplify using macros in ../common/aclocal.m4.
1712 * configure: Regenerated.
1713 * config.in: New file.
1714 * armos.c: #include config.h.
1715 * wrapper.c (mem_size): Value is in bytes now.
1716 (sim_callback): New global.
1717 (arm_sim_set_profile{,_size}): Delete.
1718 (arm_sim_set_mem_size): Rename to sim_size.
1719 (sim_do_command): Call printf_filtered via callback.
1720 (sim_set_callbacks): Record callback.
1722 Thu Oct 3 16:10:27 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1724 * Makefile.in (mostlyclean): Remove config.log.
1726 Wed Jun 26 12:17:24 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1728 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1729 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1731 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1732 (AC_PROG_INSTALL): Added.
1733 * configure: Rebuilt.
1735 Wed Feb 21 12:14:31 1996 Ian Lance Taylor <ian@cygnus.com>
1737 * configure: Regenerate with autoconf 2.7.
1739 Fri Dec 15 16:27:30 1995 Ian Lance Taylor <ian@cygnus.com>
1741 * run.c (main): Use new bfd_big_endian macro.
1743 Mon Nov 20 17:40:38 1995 Doug Evans <dje@canuck.cygnus.com>
1745 * run.c: Include "getopt.h".
1747 (usage): Make static.
1748 (main): Call arm_sim_set_verbosity.
1749 Only load sections marked SEC_LOAD.
1750 * wrapper.c (mem_size, verbosity): New static global.
1751 (arm_sim_set_mem_size): Renamed from sim_size. Callers updated.
1752 (arm_sim_set_profile{,_size}): Renamed from sim_foo. Callers updated.
1754 Fri Nov 17 19:35:11 1995 Doug Evans <dje@canuck.cygnus.com>
1756 * armdefs.h (ARMul_State): New member `verbose'.
1757 * armrdi.c (ARMul_ConsolePrint): Add missing va_end.
1758 * run.c (verbose): Make global.
1759 * wrapper.c (init): Set state->verbose.
1760 (ARMul_ConsolePrint): Don't print anything if !verbose.
1762 Fri Oct 13 15:30:30 1995 Doug Evans <dje@canuck.cygnus.com>
1764 * armos.c: #include dbg_rdi.h.
1765 (ARMul_OSHandleSWI): Handle SWI_Breakpoint.
1766 * armos.h (SWI_Breakpoint): Define.
1767 * wrapper.c: #include armemu.h, dbg_rdi.h.
1769 (sim_resume): Use state->EndCondition to record stop state.
1770 Call FLUSHPIPE before returning.
1771 (sim_stop_reason): Determine reason from state->EndCondition.
1773 Fri Oct 13 15:04:05 1995 steve chamberlain <sac@slash.cygnus.com>
1775 * wrapper.c (sim_set_callbacks): New.
1777 Thu Sep 28 19:45:56 1995 Doug Evans <dje@deneb.cygnus.com>
1779 * armos.c (ARMul_OSHandleSWI): Result of read/write calls is
1780 number of bytes not read/written (or -1).
1782 Wed Sep 20 13:35:54 1995 Ian Lance Taylor <ian@cygnus.com>
1784 * Makefile.in (maintainer-clean): New synonym for realclean.
1786 Fri Sep 8 14:27:20 1995 Ian Lance Taylor <ian@cygnus.com>
1788 * configure.in: Remove AC_PROG_INSTALL.
1789 * configure: Rebuild.
1790 * Makefile.in (INSTALL): Revert to using install.sh.
1791 (INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
1792 (INSTALL_XFORM, INSTALL_XFORM1): Restore.
1793 (mostlyclean): Make the same as clean, not distclean.
1794 (clean): Remove config.log.
1795 (install): Don't install in $(tooldir).
1797 Thu Sep 7 12:00:17 1995 Doug Evans <dje@canuck.cygnus.com>
1799 (Try to) Update to new bfd autoconf scheme.
1800 * run.c: Don't include sysdep.h.
1801 * Makefile.in (INSTALL{,_PROGRAM,_DATA}): Use autoconf computed value.
1802 (CC, CFLAGS, AR, RANLIB): Likewise.
1803 (HDEFINES, TDEFINES): Define.
1804 (CC_FOR_BUILD): Delete.
1805 (host_makefile_frag): Delete.
1806 (Makefile): Don't depend on frags.
1807 * configure.in (sysdep.h): Don't create symlink.
1808 (host_makefile_frag, frags): Deleted.
1809 (CC, CFLAGS, AR, RANLIB, INSTALL): Compute values.
1810 * configure: Regenerated.
1812 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1814 * Update all FSF addresses except those in COPYING* files.
1816 Wed Jul 5 16:15:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1818 * Makefile.in (clean): Remove run, libsim.a.
1820 * Makefile.in, configure.in: converted to autoconf.
1821 * configure: New file, generated with autconf 2.4.
1825 Fri Jun 30 16:49:47 1995 Stan Shebs <shebs@andros.cygnus.com>
1827 * wrapper.c (sim_do_command): New function.
1829 Tue Jun 13 10:57:32 1995 Steve Chamberlain <sac@slash.cygnus.com>
1831 * armos.c (ARMul_OSHandleSWI): New version to work with
1834 Thu Jun 8 14:37:14 1995 Steve Chamberlain <sac@slash.cygnus.com>
1836 * run.c (main): Grab return value from right register.
1838 Wed May 24 14:37:31 1995 Steve Chamberlain <sac@slash.cygnus.com>