1 2011-12-03 Mike Frysinger <vapier@gentoo.org>
3 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
4 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
5 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
6 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
7 tstr in the tbuf output.
9 2011-12-03 Mike Frysinger <vapier@gentoo.org>
11 * Makefile.in: Delete all dependency rules.
12 * aclocal.m4, configure: Regenerate.
14 2011-10-19 Mike Frysinger <vapier@gentoo.org>
16 * configure: Regenerate after common/acinclude.m4 update.
18 2011-10-17 Mike Frysinger <vapier@gentoo.org>
20 * configure.ac: Change include to common/acinclude.m4.
21 * aclocal.m4, configure: Regenerate.
23 2011-10-17 Mike Frysinger <vapier@gentoo.org>
25 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
26 call. Replace common.m4 include with SIM_AC_COMMON.
27 * configure: Regenerate.
29 2011-09-28 Mike Frysinger <vapier@gentoo.org>
31 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
33 2011-07-05 Mike Frysinger <vapier@gentoo.org>
35 * interp.c (sim_do_command): Delete.
37 2011-07-01 Mike Frysinger <vapier@gentoo.org>
39 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
40 stat_map_32 and stat_map_64.
41 (cb_libgloss_stat_map_32): New stat map.
42 (stat_map_32, stat_map_64): New stat map pointers.
43 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
44 stat_map_64 to cb_linux_stat_map_64.
45 (bfin_virtual_init): New function.
46 (sim_create_inferior): Call bfin_virtual_init for all other envs.
48 2011-06-22 Mike Frysinger <vapier@gentoo.org>
50 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
51 sc.result2 and dreg 2 to sc.errcode.
53 2011-06-18 Robin Getz <robin.getz@analog.com>
55 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
56 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
57 ASHIFT accumulator insns.
59 2011-06-18 Robin Getz <robin.getz@analog.com>
61 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
64 2011-06-18 Robin Getz <robin.getz@analog.com>
66 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
67 rather than get_extended_acc in LSHIFT insns.
69 2011-06-18 Robin Getz <robin.getz@analog.com>
71 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
72 Check MM once when mmod is M_FU to match M_TFU better.
74 2011-06-18 Robin Getz <robin.getz@analog.com>
76 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
77 32, perform a left shift. Update the corresponding AV bit. Set
78 AZ when the low 32bits are also zero.
80 2011-06-18 Robin Getz <robin.getz@analog.com>
82 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
83 call lshift only when count is positive. Otherwise, call ashiftrt.
84 With arithmetic right shift insns, call ashiftrt when the value is
85 small enough, otherwise call lshift.
87 2011-06-18 Robin Getz <robin.getz@analog.com>
89 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
90 mmod is M_IH rather than computing the result by hand.
92 2011-06-18 Robin Getz <robin.getz@analog.com>
94 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
95 before saturation, set sat when more cases saturate, and set the
96 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
97 M_W32, change the max values compared against.
98 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
99 when processing MAC1 and pass v_0 when processing MAC0. Combine
100 the results into the V/VS ASTAT bits.
102 2011-06-18 Robin Getz <robin.getz@analog.com>
104 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
105 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
108 2011-06-18 Robin Getz <robin.getz@analog.com>
110 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
111 allow MM to sign extend all the time.
112 (decode_macfunc): Likewise. Drop sign extension of unsigned
115 2011-06-18 Robin Getz <robin.getz@analog.com>
117 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
118 (decode_macfunc): Likewise when mmod is M_IH.
120 2011-06-18 Mike Frysinger <vapier@gentoo.org>
122 * interp.c (sim_create_inferior): Change free to freeargv.
124 2011-06-04 Mike Frysinger <vapier@gentoo.org>
126 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
127 (bf537_port): Define applicable devices with PORT to the glue-or
128 devices instead of SIC.
129 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
130 Only parse reg/type when the device has an address. Move the call
131 to dv_bfin_hw_port_parse up before slash check.
133 2011-06-04 Mike Frysinger <vapier@gentoo.org>
135 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
136 BFIN_SIC_TO_CEC_PORTS definition.
137 (SIC_PORTS): New define.
138 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
139 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
140 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
142 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
143 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
144 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
145 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
146 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
147 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
148 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
149 * machs.c (bfin_port_layout): New structure.
150 (bfin_model_data): Add new "port" and "port_count" members.
151 (PORT, SIC): New defines.
152 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
153 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
154 Move and redefine port layout from dv-bfin_sic.c to here.
155 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
156 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
157 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
158 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
159 bf548_port, bf549_port): New defines.
160 (bfin_model_data): Link in new bfin_port_layout.port member.
161 (dv_bfin_hw_port_parse): New function.
162 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
163 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
164 bfin_sic links with new dv_bfin_hw_port_parse function.
166 2011-06-03 Mike Frysinger <vapier@gentoo.org>
168 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
170 2011-05-25 Mike Frysinger <vapier@gentoo.org>
172 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
174 2011-05-25 Mike Frysinger <vapier@gentoo.org>
176 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
177 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
178 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
179 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
180 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
181 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
182 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
183 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
184 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
185 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
186 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
187 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
188 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
189 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
190 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
191 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
192 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
193 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
194 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
195 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
196 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
197 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
198 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
199 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
200 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
201 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
202 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
203 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
205 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
207 2011-05-25 Mike Frysinger <vapier@gentoo.org>
209 * Makefile.in (dv-bfin_pfmon.o): New target.
210 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
211 * configure: Regenerated.
212 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
213 * machs.c: Add include new bfin_pfmon.h.
214 (bfin_core_dev): Add pfmon.
216 2011-05-25 Mike Frysinger <vapier@gentoo.org>
218 * machs.c (bf526_roms): Add a region with rev of 2.
219 (bf54x_roms): Add regions with rev of 4.
220 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
221 bf54x_l1-0.4.h headers.
222 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
225 2011-05-14 Mike Frysinger <vapier@gentoo.org>
227 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
230 2011-05-14 Mike Frysinger <vapier@gentoo.org>
232 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
233 local uart. When LOOP_ENA is set in mcr, write to the saved byte
234 and count fields of the uart.
235 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
236 and bfin_uart_get_next_byte.
237 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
238 check first, and skip the remaining code when LOOP_ENA is set in mcr.
239 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
240 (bfin_uart_get_next_byte): Likewise.
241 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
242 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
243 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
245 2011-05-09 Mike Frysinger <vapier@gentoo.org>
247 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
248 from uart->lsr before setting them.
250 2011-04-27 Mike Frysinger <vapier@gentoo.org>
252 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
253 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
254 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
255 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
256 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
259 2011-04-26 Mike Frysinger <vapier@gentoo.org>
261 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
262 (bfin_gpio_io_write_buffer): Store the current port state into
263 "data", and call bfin_gpio_forward_ouput when the data or dir
265 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
267 2011-04-26 Mike Frysinger <vapier@gentoo.org>
269 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
270 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
271 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
272 mask a or mask b MMRs are written.
273 (bfin_gpio_port_event): When handling edge gpios, set the bit in
274 int_state, call bfin_gpio_forward_ints, and then clear the bit.
275 When handling level gpios, clear/set the bit in int_state rather
276 than returning immediately. Call bfin_gpio_forward_ints instead
277 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
279 2011-04-16 Mike Frysinger <vapier@gentoo.org>
281 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
282 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
284 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
285 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
287 2011-04-14 Mike Frysinger <vapier@gentoo.org>
289 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
290 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
291 and BYTEUNPACK insns.
293 2011-04-11 Mike Frysinger <vapier@gentoo.org>
295 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
296 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
297 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
298 in the trace output, and call the new bfin_sic_port_event func.
300 2011-04-11 Mike Frysinger <vapier@gentoo.org>
302 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
304 2011-04-01 Mike Frysinger <vapier@gentoo.org>
306 * dv-bfin_otp.c (bfin_otp_ports): Declare.
307 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
309 2011-03-29 Mike Frysinger <vapier@gentoo.org>
311 * configure: Regenerate after common/aclocal.m4 changes.
313 2011-03-28 Robin Getz <robin.getz@analog.com>
315 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
316 and add to casted low 16bits of A0.L and store in val0. Cast high
317 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
318 store in val1. Delete bit checks of val0 and val1.
320 2011-03-26 Robin Getz <robin.getz@analog.com>
322 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
323 the result was 0x80000000 for RND12 subtraction.
325 2011-03-26 Robin Getz <robin.getz@analog.com>
327 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
329 2011-03-24 Mike Frysinger <vapier@gentoo.org>
331 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
332 major code flow point.
333 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
334 before calling hw_port_event on ourselves.
335 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
336 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
337 at the start of the function.
339 2011-03-24 Mike Frysinger <vapier@gentoo.org>
341 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
342 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
343 Invert port->both bit check.
345 2011-03-24 Mike Frysinger <vapier@gentoo.org>
347 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
348 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
350 2011-03-23 Mike Frysinger <vapier@gentoo.org>
352 * TODO: Document some known SIC issues.
354 2011-03-23 Mike Frysinger <vapier@gentoo.org>
356 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
357 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
358 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
359 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
360 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
361 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
362 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
363 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
364 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
365 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
366 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
367 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
368 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
369 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
371 2011-03-23 Mike Frysinger <vapier@gentoo.org>
373 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
375 2011-03-23 Mike Frysinger <vapier@gentoo.org>
377 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
379 2011-03-23 Robin Getz <robin.getz@analog.com>
381 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
382 value for the VIT_MAX insn, and mask off the result when done.
384 2011-03-23 Robin Getz <robin.getz@analog.com>
386 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
387 and set A0 to a0_lo when up_lo is false.
389 2011-03-23 Robin Getz <robin.getz@analog.com>
391 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
392 saturate_s40, and use the v parameter to update the AV bit. Set the
393 AC bit only when the final result is 0.
395 2011-03-23 Mike Frysinger <vapier@gentoo.org>
397 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
398 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
399 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
400 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
401 Encode ids with the ENC macro.
402 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
403 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
404 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
405 (bfin_sic_533_port_event): Delete.
406 (bfin_sic_finish): Call set_hw_port_event with
407 bfin_sic_537_port_event for BF533 and BF59x targets.
409 2011-03-23 Robin Getz <robin.getz@analog.com>
411 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
412 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
414 2011-03-23 Mike Frysinger <vapier@gentoo.org>
416 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
417 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
418 Change bfin_gpio addresses from f/g/h to 5/6/7.
419 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
421 2011-03-17 Mike Frysinger <vapier@gentoo.org>
423 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
424 * configure: Regenerate.
425 * config.in: Regenerate.
426 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
429 2011-03-15 Mike Frysinger <vapier@gentoo.org>
431 * Makefile.in (dv-bfin_gpio.o): New target.
432 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
433 * configure: Regenerate.
434 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
435 * machs.c: Include dv-bfin_gpio.h.
436 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
437 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
438 Delete GPIO memory stubs.
439 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
440 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
442 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
444 2011-03-15 Mike Frysinger <vapier@gentoo.org>
446 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
447 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
448 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
449 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
450 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
451 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
452 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
453 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
454 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
455 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
456 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
457 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
458 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
459 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
460 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
461 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
462 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
464 2011-03-15 Robin Getz <robin.getz@analog.com>
466 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
469 2011-03-15 Robin Getz <robin.getz@analog.com>
471 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
473 2011-03-15 Robin Getz <robin.getz@analog.com>
475 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
476 high bit is set after extract_mult.
477 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
478 functions. Use these to update the AN bit.
480 2011-03-15 Robin Getz <robin.getz@analog.com>
482 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
483 the extract_mult functions. Include these when updating the V, VS,
486 2011-03-15 Robin Getz <robin.getz@analog.com>
488 * bfin-sim.c (astat_names): New global bit array.
489 (decode_CC2stat_0): Delete local astat_name and astat_names.
490 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
491 Print out ASTAT bit values when checking an ASTAT register.
493 2010-03-15 Robin Getz <robin.getz@analog.com>
495 * bfin-sim.c (extract_mult): Handle M_IU.
497 2011-03-05 Mike Frysinger <vapier@gentoo.org>
499 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
500 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
501 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
502 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
503 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
504 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
505 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
506 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
507 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
508 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
509 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
510 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
511 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
512 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
513 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
514 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
515 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
516 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
517 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
518 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
519 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
520 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
521 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
522 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
523 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
524 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
525 tconfig.in: New Blackfin port.