1 2011-10-17 Mike Frysinger <vapier@gentoo.org>
3 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
4 call. Replace common.m4 include with SIM_AC_COMMON.
5 * configure: Regenerate.
7 2010-04-14 Mike Frysinger <vapier@gentoo.org>
9 * interp.c (sim_write): Add const to buffer arg.
11 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
13 * configure: Regenerate.
15 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
17 * config.in: Regenerate.
18 * configure: Likewise.
20 * configure: Regenerate.
22 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
24 * configure: Regenerate to track ../common/common.m4 changes.
27 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
28 Daniel Jacobowitz <dan@codesourcery.com>
29 Joseph Myers <joseph@codesourcery.com>
31 * configure: Regenerate.
33 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
36 * config.in: Regenerate.
38 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
40 * configure: Regenerated.
42 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
44 * configure: Regenerated.
46 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
48 * configure: Regenerated.
50 2006-04-18 Nick Clifton <nickc@redhat.com>
52 * interp.c (sim_stop_reason): Fix typo.
54 2005-11-28 Mark Mitchell <mark@codesourcery.com>
56 * interp.c (gdb/signals.h): Include it.
57 (sim_stop_reason): Use TARGET_SIGNAL_*.
59 2005-03-23 Mark Kettenis <kettenis@gnu.org>
61 * configure: Regenerate.
63 2005-01-14 Andrew Cagney <cagney@gnu.org>
65 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
66 explicit call to AC_CONFIG_HEADER.
67 * configure: Regenerate.
69 2005-01-12 Andrew Cagney <cagney@gnu.org>
71 * configure.ac: Update to use ../common/common.m4.
72 * configure: Re-generate.
74 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
76 * configure: Regenerated to track ../common/aclocal.m4 changes.
78 2005-01-07 Andrew Cagney <cagney@gnu.org>
80 * configure.ac: Rename configure.in, require autoconf 2.59.
81 * configure: Re-generate.
83 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
85 * configure: Regenerate for ../common/aclocal.m4 update.
87 2004-06-28 Andrew Cagney <cagney@gnu.org>
89 * interp.c (sim_resume): Rename ui_loop_hook to
90 deprecated_ui_loop_hook.
92 2003-10-30 Andrew Cagney <cagney@redhat.com>
94 * simops.c: Replace "struct symbol_cache_entry" with "struct
97 2003-06-22 Andrew Cagney <cagney@redhat.com>
99 * interp.c (xfer_mem): Simplify. Only do a single partial
100 transfer. Problem reported by Tom Rix.
102 2003-05-07 Andrew Cagney <cagney@redhat.com>
104 * interp.c (sim_d10v_translate_addr): Add "regcache" parameter.
105 (sim_d10v_translate_imap_addr): Ditto.
106 (sim_d10v_translate_dmap_addr): Ditto.
107 (xfer_mem): Pass NULL regcache to sim_d10v_translate_addr.
108 (dmem_addr): Pass NULL regcache to sim_d10v_translate_dmap_addr.
109 (dmap_register, imap_register): Add "regcache" parameter.
110 (imem_addr): Pass NULL regcache to sim_d10v_translate_imap_addr.
111 (sim_fetch_register): Pass NULL regcache to imap_register and
114 2003-02-27 Andrew Cagney <cagney@redhat.com>
116 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
118 2002-11-13 Andrew Cagney <cagney@redhat.com>
120 * simops.c: Include <string.h>.
122 2002-06-17 Andrew Cagney <cagney@redhat.com>
124 * d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum.
126 2002-06-16 Andrew Cagney <ac131313@redhat.com>
128 * configure: Regenerated to track ../common/aclocal.m4 changes.
130 2002-06-13 Tom Rix <trix@redhat.com>
132 * interp.c (xfer_mem): Fix transfers across multiple segments.
134 2002-06-09 Andrew Cagney <cagney@redhat.com>
136 * Makefile.in (INCLUDE): Update path to callback.h.
137 * gencode.c: Do not include "callback.h".
138 * d10v_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
141 2002-06-08 Andrew Cagney <cagney@redhat.com>
143 * interp.c (sim_fetch_register): Fix name of enum used in cast.
144 (sim_store_register): Ditto.
146 2002-06-02 Elena Zannoni <ezannoni@redhat.com>
148 From Jason Eckhardt <jle@redhat.com>
149 * d10v_sim.h (INC_ADDR): Correctly handle the case where MOD_E is
150 less than MOD_S (post-decrement).
152 2002-06-01 Andrew Cagney <ac131313@redhat.com>
154 * interp.c (sim_fetch_register, sim_store_register): Use a switch
155 statement and enums from "sim-d10v.h".
157 2002-05-28 Elena Zannoni <ezannoni@redhat.com>
159 * interp.c (sim_create_inferior): Add comment.
161 From Alan Matsuoka <alanm@redhat.com>:
162 From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
163 * simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
164 (OP_4401): Output "mvf0t" instead of "mf0t".
165 (OP_460B): Do not output a flag register.
166 (OP_4609): Do not output a flag register.
168 2002-05-23 Andrew Cagney <ac131313@redhat.com>
170 * Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
171 * interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
173 2001-08-01 John R. Moore <jmoore@redhat.com>
175 * interp.c (sim_create_inferior): Removed a hack that stated
176 it was setting r0/r1 with argc/argv.
178 2001-04-15 J.T. Conklin <jtc@redback.com>
180 * Makefile.in (simops.o): Add simops.h to dependency list.
182 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
184 * configure: Regenerated to track ../common/aclocal.m4 changes.
186 Tue Apr 18 16:26:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
188 * interp.c (sim_resume): Deliver SIGILL.
189 (lookup_hash): Do not print SIGILL message.
191 Tue Feb 22 18:24:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
193 * Makefile.in (SIM_EXTRA_CFLAGS): Define SIM_HAVE_ENVIRONMENT.
194 * interp.c (sim_set_trace): Replace sim_trace. Enable tracing.
196 Tue Feb 8 17:41:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
198 * d10v_sim.h (SIG_D10V_BUS): Define.
200 * simops.c (address_exception): Delete function.
201 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
202 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
203 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
204 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): Replace call to
205 address_exception with code that sets SIG_D10V_BUS.
207 * interp.c (sim_resume): When SIGBUS or SIGSEGV, deliver a bus
208 error to the simulator before resuming execution.
209 (sim_trace): Check stop reason and use that to determine sim_trace
211 (sim_stop_reason): For SIG_D10V_BUS return a SIGBUS / SIGSEGV
214 Tue Jan 18 16:07:42 MST 2000 Diego Novillo <dnovillo@cygnus.com>
216 * interp.c (sim_create_inferior): Change internal initial value for
219 Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
221 * interp.c (lookup_hash): Stop the update of the PC when there was
222 an illegal instruction exception.
224 Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com>
226 * simops.c (address_exception): New function.
227 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
228 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
229 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
230 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st"
231 and "st2w" check that the address is aligned.
233 1999-12-30 Chandra Chavva <cchavva@cygnus.com>
235 * d10v_sim.h (INC_ADDR): Added code to assign
236 proper address for loads with predec operations.
238 1999-11-25 Nick Clifton <nickc@cygnus.com>
240 * simops.c (OP_4E0F): New function: Simulate new bit pattern for
243 Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
245 * simops.c (move_to_cr): Don't allow user to set PSW.DM in either
248 Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
250 * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW.
251 (PSW_HW_MASK): Declare.
253 * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter.
254 (SET_CREG, SET_PSW_BIT): Update.
255 (SET_HW_CREG, SET_HW_PSW): Define.
257 Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
259 * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP
262 Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
264 * interp.c (sim_d10v_translate_addr): New function.
265 (xfer_mem): Rewrite. Use sim_d10v_translate_addr.
266 (map_memory): Make INLINE.
268 Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
270 * interp.c (sim_d10v_translate_dmap_addr): New function.
271 (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change
272 offset parameter to type uint16.
273 * d10v_sim.h (dmem_addr): Update declaration.
275 Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
277 * interp.c (imap_register, set_imap_register, dmap_register,
278 set_imap_register): Use map_memory.
280 (sim_create_inferior): Initialize all DMAP registers. NOTE that
281 DMAP2, in internal memory mode, is set to 0x0000 and NOT
282 0x2000. This is consistent with the older d10v boards.
284 Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
286 * interp.c (sim_d10v_translate_imap_addr): New function.
287 (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr.
288 (last_from, last_to): Declare.
290 Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
292 * d10v_sim.h (struct d10v_memory): Define. Support very long
294 (struct _state): Replace imem, dmem and umem by mem.
295 (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS,
296 DMEM_SEGMENTS, UMEM_SEGMENTS): Define.
298 * interp.c (map_memory): New function.
299 (sim_size, xfer_memory, imem_addr, dmem_addr): Update.
300 (UMEM_SEGMENTS): Moveed to "d10v_sim.h".
301 (IMEM_SIZEDMEM_SIZE): Delete.
303 Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
305 * interp.c: Include "sim-d10v.h".
306 (imap_register, set_imap_register, dmap_register,
307 set_dmap_register, spi_register, spu_register, set_spi_register,
308 set_spu_register): New functions.
309 (sim_create_inferior): Update.
310 (sim_fetch_register, sim_store_register): Rewrite. Use enums
311 defined in sim-d10v.h.
313 * d10v_sim.h (DEBUG_MEMORY): Define.
314 (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete.
316 Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
318 * interp.c (sim_open): Allow a debug value to be passed to the -t
320 (lookup_hash): Don't exit on an illegal instruction.
321 (do_long, do_2_short, do_parallel): Check for failed instruction
324 Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
326 * simops.c (OP_3220): Fix trace output for illegal accumulator
329 1999-09-14 Nick Clifton <nickc@cygnus.com>
331 * simops.c: Disable setting of DM bit in PSW.
333 Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
335 * simops.c (op_types): Added new memory indirect type OP_MEMREF3.
336 (trace_input_func): Added support for OP_MEMREF3.
337 (OP_32010000): New instruction ld.
338 (OP_33010000): New instruction ld2w.
339 (OP_5209): New instruction sac.
340 (OP_4209): New instruction sachi.
341 (OP_3220): New instruction slae.
342 (OP_36010000): New instruction st.
343 (OP_37010000): New instruction st2w.
345 1999-09-09 Stan Shebs <shebs@andros.cygnus.com>
347 * interp.c (old_segment_mapping): New global.
348 (xfer_mem): Change the default segment mapping to be the way
349 that Mitsubishi prefers, but use the previous mapping if
350 old_segment_mapping is true.
351 (sim_open): Add an option -oldseg to get the old mapping.
352 (sim_create_inferior): Init mapping registers based on the
353 value of old_segment_mapping.
355 1999-09-07 Nick Clifton <nickc@cygnus.com>
357 * simops.c (OP_6601): Do not write back decremented address if
358 either of the destination registers was the same as the address
360 (OP_6201): Do not write back incremented address if either of the
361 destination registers was the same as the address register.
363 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
365 * configure: Regenerated to track ../common/aclocal.m4 changes.
367 1999-05-08 Felix Lee <flee@cygnus.com>
369 * configure: Regenerated to track ../common/aclocal.m4 changes.
371 1999-04-02 Keith Seitz <keiths@cygnus.com>
373 * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK
375 (sim_resume): If the counter has expired, call the ui_loop_hook,
377 (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of
379 * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK.
381 Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com>
383 * simops.c: If load instruction with auto increment/decrement
384 addressing is used when the destination register is the same as
385 the address register, then ignore the auto increment/decrement.
387 Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com>
389 * simops.c (OP_5F00): Ifdef SYS_stat case because
390 not all systems have it defined.
392 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
394 * simops.c (OP_5607): Correct saturation comparison/assignment.
395 (OP_1201, OP_1203, OP_17001200, OP_17001202,
396 OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201,
397 OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto.
399 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
401 * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation
407 1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com)
409 * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation
412 Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
414 * simops.c (sys/syscall.h): Include targ-vals.h instead.
415 (SYS_*): Replace with TARGET_SYS_*.
417 * Makefile.in: Add dependency on targ-vals.h.
418 (NL_TARGET): Define as NL_TARGET_d10v.
420 Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com>
422 * interp.c (xfer_mem): Missing break, instruction memory case
423 flowed into unified memory case.
425 Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com>
427 * simops.c: If load instruction with auto increment/decrement
428 addressing is used when the destination register is the same as
429 the address register, then ignore the auto increment/decrement.
431 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
433 * configure: Regenerated to track ../common/aclocal.m4 changes.
435 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
437 * configure: Regenerated to track ../common/aclocal.m4 changes.
440 Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com>
442 * acconfig.h: New file.
443 * configure.in: Reverted change of Apr 24; use sinclude again.
445 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
447 * configure: Regenerated to track ../common/aclocal.m4 changes.
450 Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com>
452 * configure.in: Don't call sinclude.
454 Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com>
456 * interp.c (struct hash_entry): OPCODE and MASK are unsigned.
458 * d10v_sim.h (remote-sim.h, sim-config.h): Include.
460 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
462 * configure: Regenerated to track ../common/aclocal.m4 changes.
464 Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
466 * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain
468 (OP_OP_1000000, add3): Trace inputs before performing add.
469 (OP_5F00, <*>): Trace input registers before making system call.
470 (OP_5F00, <kill>): Trace R0, R1 not REGn.
471 (OP_5F00, <getpid>): Always return 47.
473 * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND,
474 SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write
476 (struct _state): Add struct slot slot to global state variable.
477 (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST,
478 F0, F1, C from global State variable.
479 (struct _state): Add struct trace to global State variable.
480 (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND.
481 (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG.
482 (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr.
483 (INC_ADDR): Re-implement. Use SET_GPR to update registers.
484 (JMP): Re-implement. Use SET_* to update registers.
486 * interp.c: Use new SET_* et.al. macros to fetch / store
488 (get_operands): Squirrel away trace values at start of each
490 (do_2_short): Flush pending writes before issuing second
492 (sim_resume): Flush pending writes at end of instruction cycle.
493 (sim_fetch_register, sim_store_register, sim_create_inferior):
494 After scheduling updates to registers using SET_*, flush updates.
495 (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so
496 that each sets pc using SET_* and last SET_* eventually winds out.
498 * simops.c: Use new SET_* et.al. macros to fetch / store
500 (move_to_cr): Add MASK argument for selective update of CREG bits.
501 Re-implement using new SET_* macros.
502 (trace_output_func, trace_output): Delete. Replace with.
503 (do_trace_output_flush, trace_output_finish, trace_output_40,
504 trace_output_32, trace_output_16, trace_output_void,
505 trace_output_flag): New functions. Handle specific trace cases.
506 (OP_*): Re-write tracing to use new trace_output_* functions.
507 (OP_*): Re-write to use new SET_* et.al. macros.
508 (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition.
509 (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32.
511 Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
513 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
514 configure: Re-generate.
516 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
518 * configure: Regenerated to track ../common/aclocal.m4 changes.
520 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
522 * configure: Regenerated to track ../common/aclocal.m4 changes.
524 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
526 * configure: Regenerated to track ../common/aclocal.m4 changes.
528 Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
530 * interp.c (sim_store_register, sim_fetch_register): Pass in
531 length parameter. Return -1.
533 Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com>
535 * (dmem_addr): If address is illegal or in I/O space, signal a bus
536 error. Allocate unified memory on demand. Fix DMEM address
539 Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
541 * simops.c (OP_5F20): Implement "dbt".
542 (OP_5F60): Implement "rtd".
544 * d10v_sim.h (DPC_CR): Define enum.
545 (DBT_VECTOR_START): Define
548 Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
550 * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according
553 * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU.
556 Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
558 * simops.c (OP_5F00): Call error instead of abort for unknown
561 * d10v_sim.h (enum): Define DPSW_CR.
563 * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW.
565 Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
567 * interp.c (sim_write_phys): Delete.
568 (sim_load): Call sim_load_file with sim_write and LMA.
570 Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com>
572 * interp.c: Rewrite xfer_mem so that it translates addresses as -
573 0x00... - DMAP translated memory, 0x01... IMAP translated memory,
574 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified
577 (imem_addr): New function - translate IMEM address.
578 (sim_resume): Use imem_addr to translate insn address, abort if
580 (sim_create_inferior): Write ARGV to memory using sim_write. Pass
581 argc/argv using r0/r1 not r2/r3.
582 (sim_size): Do not initialize IMAP/DMAP here.
583 (sim_open): Call sim_create_inferior and sim_size to initialize
585 (sim_create_inferior): Initialize IMAP/DMAP to hardware reset
587 (init_system): Delete.
588 (xfer_mem, sim_fetch_register, sim_store_register): Do not call
590 (decode_pc): Check prog_bfd is defined before looking up .text
593 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
595 * configure: Regenerated to track ../common/aclocal.m4 changes.
597 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
599 * configure: Regenerated to track ../common/aclocal.m4 changes.
601 Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com>
603 * interp.c (sim_stop_reason): Exit status is now in r0, not r2.
605 Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com>
607 * d10v_sim.h (DEBUG_TRAP): New debug flag.
609 * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into
610 printing the registers.
612 Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com>
614 * simops.c (op_types): New ABI, args are r0..r3, system call # is
616 (trace_{in,out}put_func): Ditto.
618 (OP_24800000): Ditto.
622 Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com>
624 * interp.c (UMEM_SEGMENTS): New define, set to 128.
625 (sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
626 (sim_close): Reset prog_bfd to NULL after closing it. Also
627 reset prog_bfd_was_opened_p after closing prog_bfd.
628 (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
629 (sim_create_inferior): Get start address from abfd not prog_bfd.
630 (xfer_mem): Do bounds checking on addresses and return zero length
631 read/write on bad addresses, rather than aborting. Prepare to
632 be able to handle xfers that cross segment boundaries, but not
633 yet implemented. Only emit debug message when d10v_debug is
634 set as well as DEBUG being defined.
636 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
638 * configure: Regenerated to track ../common/aclocal.m4 changes.
640 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
642 * configure: Regenerated to track ../common/aclocal.m4 changes.
645 Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
647 * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR.
648 (BPSW): Ditto for BPSW_CR and not PSW_CR.
650 * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly.
652 Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
654 * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change
655 reserved trap from 0 to 15. Add trap emulation code for 0-14.
657 * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check
660 * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START,
661 SDBT_VECTOR_START, TRAP_VECTOR_START): Define.
663 * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW,
665 (OP_5F00): For "trap", update BPSW with move_to_cr.
667 Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com>
669 * d10v_sim.h (enum): Enumerate CR register names.
670 (enum): Enumerate PSW bit values.
671 (PSW): Obtain value uing move_from_cr.
672 (MOD_S, MOD_E, BPSW): Make r-values.
673 (move_from_cr, move_to_cr): Declare functions.
675 * interp.c (sim_fetch_register, sim_store_register): Use
676 move_from_cr and move_to_cr for CR register transfers.
678 * simops.c (move_from_cr, move_to_cr): New functions.
679 (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr.
680 (OP_5600): For "mvtc", use function move_to_cr.
681 (OP_5200): For "mvfc", use function move_from_cr.
683 Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
685 * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the
688 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
690 * configure: Regenerated to track ../common/aclocal.m4 changes.
692 Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
694 * d10v_sim.h (struct _state): Add DM - PSW debug mask.
696 * simops.c (OP_5600): For "mvtc", save PSW.DM.
697 (OP_5200): Ditto for "mvfc".
699 Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
701 * d10v_sim.h (SEXT56): Define.
703 * simops.c (OP_4201): For "rac", sign extend 56 bit value before
706 * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
709 Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com>
711 * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or
712 RIGHT_FIRST, as appropriate, instead of hardcoded ints that
713 don't match enum values.
715 Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
717 * simops.c (OP_3A00): For "macu", perform multiply stage using 32
718 bit rather than 16 bit precision.
719 (OP_3C00): For "mulxu", store unsigned product in ACC.
720 (OP_3800): For "msbu", subtract unsigned product from ACC,
721 (OP_0): For "sub", compute carry by comparing inputs.
723 Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
725 * simops.c (OP_1000): For "sub2w", compute carry by comparing
728 Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
730 * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
731 carry indicated by value > 0xffff.
733 Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
735 * interp.c (sim_resume): Don't set up SIGINT handler using signal,
737 (sim_resume): Fix race condition of a direct assignment to
738 stop_simulator, conditionally call sim_stop.
739 (sim_stop_reason): Check stop_simulator returning SIGINT. Clear
740 stop_simulator ready for next sim_resume call.
741 (sim_ctrl_c): Delete function.
743 Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
745 * interp.c (sim_resume): For "REP", only check/update the PC when
746 a branch instruction has not been executed.
748 Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
750 * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
751 extend bit 44 all constants.
752 (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
754 Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
756 * d10v_sim.h: Include sim-types.h.
757 (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
758 using unsigned8 et.al. from sim-types.h.
759 (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
762 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
764 * interp.c (sim_write_phys): New function, write to physical
765 instead of virtual memory.
767 * interp.c (sim_load): Pass lma_p and sim_write_phys to
770 Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
772 * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
773 exception generation code to OP_6E01.
774 (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
777 Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
779 * simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
782 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
784 * configure: Regenerated to track ../common/aclocal.m4 changes.
786 Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
788 * interp.c (pc_addr): Discard upper bit(s) of PC in case
789 IMAP1 selects unified memory.
790 * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
793 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
795 * configure: Regenerated to track ../common/aclocal.m4 changes.
797 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
799 * configure: Regenerated to track ../common/aclocal.m4 changes.
801 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
803 * configure: Regenerated to track ../common/aclocal.m4 changes.
805 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
807 * configure: Regenerated to track ../common/aclocal.m4 changes.
809 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
811 * configure: Regenerated to track ../common/aclocal.m4 changes.
813 Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
815 * interp.c (sim_resume): Increment PC at end of rep
818 * simops.c (OP_4201): Fix rachi instruction.
820 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
822 * configure: Regenerated to track ../common/aclocal.m4 changes.
824 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
826 * configure: Regenerated to track ../common/aclocal.m4 changes.
829 Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
831 * interp.c (sim_kill): Delete.
832 (sim_create_inferior): Add ABFD argument.
833 (sim_load): Move setting of PC from here.
834 (sim_create_inferior): To here.
835 (start_address): Delete variable.
837 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
839 * configure: Regenerated to track ../common/aclocal.m4 changes.
842 Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
844 * interp.c (sim_open): Add ABFD argument.
846 Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
848 * interp.c (sim_open): Add callback argument.
849 (sim_set_callbacks): Remove SIM_DESC argument.
851 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
853 * configure: Regenerated to track ../common/aclocal.m4 changes.
855 Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
857 * interp.c (sim_open): Undo patch to add -E support.
859 Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
861 * interp.c (sim_stop): New function.
863 Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
865 * Makefile.in (SIM_OBJS): Add sim-load.o.
866 * d10v_sim.h (exec_bfd): Rename to prog_bfd.
867 * interp.c: #include bfd.h.
868 (myname, sim_kind, start_address): New static locals.
869 (prog_bfd_was_opened_p, prog_bfd): New static locals.
870 (decode_pc): Update to use prog_bfd.
871 (sim_open): Set sim_kind, myname. Ignore -E arg.
872 (sim_close): Close prog_bfd if simulator opened it.
873 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
874 (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
875 Call sim_load_file to load file into simulator.
876 * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
878 Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
880 * simops.c (OP_5F00): Only provide system calls SYS_execv,
881 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
883 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
885 * configure: Regenerated to track ../common/aclocal.m4 changes.
888 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
890 * interp.c (sim_open): New arg `kind'.
892 * configure: Regenerated to track ../common/aclocal.m4 changes.
894 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
896 * configure: Regenerated to track ../common/aclocal.m4 changes.
898 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
900 * configure: Re-generate.
902 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
904 * configure: Regenerate to track ../common/aclocal.m4 changes.
906 * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
907 as trap 0, which will be deprecated. Only set errno, if an error
908 in fact was returned.
910 Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
912 * interp.c: Delete redundant prototypes of sim_foo fns.
913 (sim_open): New SIM_DESC result. Argument is now in argv form.
914 (other sim_*): New SIM_DESC argument.
916 Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
918 * simops.c (trace_{input,output}_func): Call flush_stdout from the
921 (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
922 (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
923 setting the carry bit after an add or a subtract.
925 Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
927 * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
928 40 bits of accumulators. Sign/zero extend as appropriate.
930 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
932 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
933 COMMON_{PRE,POST}_CONFIG_FRAG instead.
934 * configure.in: sinclude ../common/aclocal.m4.
935 * configure: Regenerated.
937 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
939 * configure configure.in Makefile.in: Update to new configure
940 scheme which is more compatible with WinGDB builds.
941 * configure.in: Improve comment on how to run autoconf.
942 * configure: Re-run autoconf to get new ../common/aclocal.m4.
943 * Makefile.in: Use autoconf substitution to install common
946 Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
948 * gencode.c: patch to not #include "d10v_sim.h" which
949 unecessarily includes bfd.h and causes wingdb configure
952 Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
954 * interp.c (xfer_mem): Change unified memory to 0x0.
956 Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
958 * simops.c (OP_3E01): Fix tracing information.
959 (OP_300{0,1}): Do not propigate sign.
961 Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
963 * config.in (WORDS_BIGENDIAN): Add.
964 * configure: Regenerated.
965 * d10v_sim.h: #include "config.h"
967 Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
969 * gencode.c (write_opcodes): Eliminate warnings when generated
972 Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
974 * interp.c (sim_open): Cast result of calloc, and make sure NULL
976 (dmem_addr): If address is illegal or in I/O space, signal a bus
978 (pc_addr): Signal bus error, not illegal instruction for bogus
981 Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
983 * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
984 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
985 * configure.in: Simplify using macros in ../common/aclocal.m4.
986 Call AC_CHECK_HEADERS(unistd.h).
987 * configure: Regenerated.
988 * config.in: New file.
989 * interp.c: #include "callback.h".
990 * simops.c: #include "config.h". #include <unistd.h> if present.
992 Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
994 * d10v-sim.h (simops): Add flag is_long.
995 (State): Add pc_changed. Instructions which update the PC should
996 use the JMP macro which sets this.
997 (JMP): New macro. Sets the PC and the pc_changed flag.
999 * gencode.c (write_opcodes): Add is_long field.
1001 * interp.c (lookup_hash): If we blindly apply a short opcode's mask
1002 to a long opcode we could get a false match. Check the opcode size.
1003 (hash): Add a size field to the hash table.
1004 (sim_open): Initialize size field in hash table.
1005 (sim_resume): Change to logic for setting the PC. Used to increment the
1006 PC if it had not been changed. This didn't allow single-instruction loops.
1007 Now checks the flag State.pc_changed. Also now stops when ^C is received.
1008 (dmem_addr): Fix translation of data segments to unified memory.
1009 (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
1011 * simops.c: Changed all branch and jump instructions to use new JMP macro.
1012 (OP_20000000): Corrected trace information to show this is a ldi.l, not
1013 a ldi.s instruction.
1015 Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1017 * interp.c (sim_fetch_register, sim_store_register): Fix bug where
1018 updating the accumulators was overwriting other parts of the global
1021 Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1023 * interp.c (bfd.h) Don't include it here any more.
1024 (text{,_start,_end}): Move here from simops.c and make extern.
1025 (decode_pc): New function to return the PC as an address that the
1027 (dmem_addr): Print decoded PC in error message.
1030 * simops.c (bfd.h) Don't include it here any more.
1031 (text{,_start,_end}): Move to simops.c.
1032 (trace_input_func): Move decoding of PC, and looking up .text
1035 * d10v_sim.h (bfd.h): Include it here.
1036 (text{,_start,_end}): Add external declarations.
1040 Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1042 * interp.c (sim_size): Now allocates unified memory for imap segments
1043 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
1044 (sim_write): Just call xfer_mem().
1045 (sim_read): Just call xfer_mem().
1046 (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
1047 (dmem_addr): New function. Reads dmap register and translates data
1048 addresses to local addresses.
1049 (pc_addr): New function. Reads imap register and computes local address
1050 corresponding to contents of the PC.
1051 (sim_resume): Change to use pc_addr().
1052 (sim_create_inferior): Change reinitialization code. Also reinitializes
1054 (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1055 (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1057 * simops.c (MEMPTR): Redefine to use dmem_addr().
1058 (OP_5F00): Replace references to STate.imem with dmem_addr().
1060 * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
1061 (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
1062 (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
1064 Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1066 * d10v_sim.h (_ins_type): Reorganize, so that we can provide
1067 better statistics, like not counting NOPS as parallel
1068 instructions, and printing total cycles.
1069 (ins_type_counters): Make unsigned long.
1070 (left_nops,right_nops): Fold into ins_type_counters.
1072 * simops.c (trace_input_func): Print new instruction types.
1073 Handle OP_R2R3 as input types.
1074 (OP_{38000000,7000}): Correctly sign extend bytes.
1075 (OP_5E00): Don't count NOPs as parallel instructions.
1076 (OP_460B): Remove unused variable.
1079 * interp.c (ins_type_counters): Make unsigned long.
1080 (left_nops,right_nops): Delete.
1081 (most functions): Add prototypes.
1082 (INLINE): If GCC and optimize define as __inline__.
1083 ({,lookup_}hash,get_operands): Declare as INLINE.
1084 (do_parallel): Count conditional operations.
1085 (add_commas): New function, to add commas every 3 digits.
1086 (sim_size): Call add_commas to print numbers.
1087 (sim_{open,resume}): Delete unused variables.
1088 (sim_info): Provide better statistics.
1089 (sim_read): Add int return type.
1091 Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1093 * interp.c (sim_resume): Change the way single-stepping and exceptions
1094 are handled so single-stepping works again.
1096 Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1098 * endian.c: Optimize simulated loads/stores on x86, AIX, and big
1101 * configure.in (--enable-sim-bswap): New switch to enable using
1102 the BSWAP instruction on x86's.
1103 * configure: Regenerate.
1105 * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
1108 Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1110 * endian.c: New file. Move endian functions here from interp.c.
1111 Optimize code, and make it work as either inline functions or as a
1114 * interp.c: Move endian functions from here to endian.c.
1116 * Makefile.in (INCLUDE): Add endian.c.
1117 (run,libsim.a): Add dependency on endian.o.
1118 (endian.o): Add dependency.
1120 * d10v_sim.h (read/write support): Always go through the machine
1121 independent endian functions. If compiling with GCC and
1122 optimizing, include endian.c so the endian functions are inlined.
1124 * simops.c (OP_5F00): Correct tracing of accumulators.
1126 Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1128 * simops.c (OP_5F00): Add support for getpid, kill system calls.
1130 * interp.c (do_{2_short,parallel}): If an exception is raised,
1131 don't execute the second instruction.
1133 Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1135 * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
1136 temporary in case the register is overriden when loading.
1137 (OP_6200): Output type is OP_DREG for tracing.
1139 Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1141 * d10v_sim.h (struct _state): Add mem_{min,max} fields.
1143 * interp.c (sim_size): Initialize mem_{min,max} fields.
1144 (sim_write): Update mem_{min,max} fields.
1145 (sim_resume): If PC is not in the minimum/maximum memory range,
1147 (sim_create_inferior): Preserve mem_{min,max} fields.
1149 Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
1151 * simops.c (OP_5F00): Add support for time() system call.
1153 Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1155 * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
1157 (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
1160 Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1162 * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
1163 (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
1164 (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
1165 to call/subroutine returns to trace the first two arguments and
1166 the return value. For small jumps, use CONSTANT8, not CONSTANT16.
1168 Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1170 * interp.c (sim_create_inferior): Reinitialize State every time
1171 sim_create_inferior() is called.
1173 Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
1175 * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
1177 (OP_401): Fix tracing information.
1179 Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1181 * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
1182 (trace_input_func): Use them.
1183 (trace_input_func): Make sure there is a trailing space after the
1185 (OP_6200): Fix tracing info.
1187 * Makefile.in (run): Add dependencies on libbfd.a and
1190 Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1192 * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
1193 numbers and function names in debug trace.
1194 (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
1196 (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
1197 and exit system call trap being executed.
1199 * interp.c (sim_stop_reason): Set exit code correctly for stop
1200 instruction and exit system call trap.
1202 * configure.in (--enable-sim-cflags): Remove trace case.
1203 (--enable-sim-debug): New switch to set the debug values.
1204 * configure: Regenerate.
1206 * simops.c (trace_{input,output}_func): Rename from
1207 trace_{input,output}.
1208 (trace_{input,output}): Call trace_{input,output}_func if
1209 d10v_debug is non-zero.
1210 (SIZE_INSTRUCTION): Cut down to 8.
1211 (SIZE_OPERANDS): Cut down to 18.
1212 (SIZE_LOCATION): New value for size of line number, function name
1214 (init_text_p,text{,_start,_end}): New static variables for
1215 printing line number and function name.
1216 (exec_bfd): New external that run.c sets.
1217 (trace_input_func): Print line number and function name if
1218 available and if desired.
1219 (OP_4E09): Don't print out DBT message.
1220 (OP_5FE0): Set exception field to SIG_D10V_STOP.
1221 (OP_5F00): Set exception field to SIG_D10V_EXIT.
1223 Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1225 * interp.c (do_2_short): If the instruction encodes jump->ins,
1226 don't do the second instruction if the jump succeeds.
1228 Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1230 * simops.c (OP_5F00): Use unknown traps to print all GPRs,
1231 accumulators, PC, and F0/F1/C flags.
1233 Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
1235 * simops.c (OP_5F00): Fix problems with system calls.
1237 Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1239 * simops.c (OP_5F00): Correct tracing information for trap.
1241 Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1243 * Makefile.in (CSEARCH): Correctly find opcodes directory.
1245 Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1247 * simops.c (trace_output): Properly align accumulator output.
1248 (OP_3{0,2,4}00): Properly parenthesize test expression. Add error
1249 if shift count is too high.
1250 (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
1251 (OP_4E09): Make cpfg properly trace the input flags.
1252 (op_types): Add OP_FLAG_OUTPUT.
1253 (trace_{input,output}): Support OP_FLAG_OUTPUT.
1254 (OP_31000000): This ld2w varient is a 16-bit memory reference, not
1255 an 8-bit memory reference instruction for tracing purposes.
1256 (OP_201): Addi needs to set the carry.
1258 Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1260 * simops.c (OP_2600, OP_2601): Changed min and max comparisons
1261 to use signed register values.
1263 Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1265 * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
1267 (_ins_type): New enumeration to specify which container an
1268 instruction is in, and whether it is part of a parallel operation.
1269 (_state): Add ins_type field.
1270 ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
1271 (ins_type_counters): Counters for the various instruction types.
1272 ({left,right}_nops): Counters for the number of nops in each
1274 (d10v_debug): New variable to indicate whether debugging is turned
1277 * simops.c: (all functions): Change all #ifdef DEBUG code so that
1278 the input and output values can be traced, along with the
1279 instruction type. Make the -t option enable tracing.
1280 (all functions): Change printf calls to use the printf_filtered
1281 function in the callback table.
1283 * interp.c (_leftright): New enumeration to say whether 2 short
1284 instructions are done left first or right first.
1285 (do_{long,2_short,parallel}): Indicate in the machine state which
1286 type of instruction this is. Count each of the types of
1287 instructions executed.
1288 (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
1290 (sim_resume): Pass left/right indication to do_2_short.
1291 (all functions): Change printf calls to use the printf_filtered
1292 function in the callback table.
1293 (sim_trace): Turn on debug flag if DEBUG was defined, and call
1295 (sim_info): Print out statistics on instructions.
1296 (sim_{trace,create_inferior}): Eliminate extraneous output unless
1298 (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
1299 Only initialize the hash table the first time sim_open is called.
1301 * Makefile.in: Make objects depend on d10v_sim.h.
1302 ({,SIM_}CFLAGS): Include configure dependent switches. Setting
1303 CFLAGS does not override host/target defines or SIM_CFLAGS.
1304 (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
1305 (run): By default, the math library is not needed to be linked
1307 ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
1309 (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
1311 ({run,callback}.o): Provide explicit paths to their appropriate
1313 (gencode{,.o},d10v-opc.o): Split compilation into creating object
1314 and linking. Instead of linking in libopcodes.a, just compile
1315 d10v-opc.o directly to handle canadian cross.
1316 (CSEARCH): Add opcodes directory.
1318 * configure.in (--enable-sim-cflags): New switch to allow user to
1320 (CC_FOR_BUILD): Deal with canadian crosses.
1321 * configure: Regenerate.
1323 Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com>
1325 * simops.c: Include correct syscall.h for d10v, not host's.
1326 Fix #ifdef SYS_stat.
1328 Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1330 * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
1331 Add trap 2 to be printf and trap 3 to be putchar.
1333 Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com>
1335 * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
1336 for low-level system calls.
1338 Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1340 * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
1342 Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1344 * d10v_sim.h (SEXT32): Added.
1345 * interp.c: Commented out printfs.
1346 * simops.c: Fixed error in sb and st2w.
1348 Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1350 * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
1351 DSP instructions. Added modulo addressing.
1353 Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1355 * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
1357 Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1359 * d10v_sim.h, simops.c: Snapshot.
1361 Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1363 * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
1364 gencode.c, interp.c, simops.c: Created.