1 Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3 * interp.c (bfd.h) Don't include it here any more.
4 (text{,_start,_end}): Move here from simops.c and make extern.
5 (decode_pc): New function to return the PC as an address that the
7 (dmem_addr): Print decoded PC in error message.
10 * simops.c (bfd.h) Don't include it here any more.
11 (text{,_start,_end}): Move to simops.c.
12 (trace_input_func): Move decoding of PC, and looking up .text
15 * d10v_sim.h (bfd.h): Include it here.
16 (text{,_start,_end}): Add external declarations.
20 Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
22 * interp.c (sim_size): Now allocates unified memory for imap segments
23 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
24 (sim_write): Just call xfer_mem().
25 (sim_read): Just call xfer_mem().
26 (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
27 (dmem_addr): New function. Reads dmap register and translates data
28 addresses to local addresses.
29 (pc_addr): New function. Reads imap register and computes local address
30 corresponding to contents of the PC.
31 (sim_resume): Change to use pc_addr().
32 (sim_create_inferior): Change reinitialization code. Also reinitializes
34 (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
35 (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
37 * simops.c (MEMPTR): Redefine to use dmem_addr().
38 (OP_5F00): Replace references to STate.imem with dmem_addr().
40 * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
41 (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
42 (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
44 Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
46 * d10v_sim.h (_ins_type): Reorganize, so that we can provide
47 better statistics, like not counting NOPS as parallel
48 instructions, and printing total cycles.
49 (ins_type_counters): Make unsigned long.
50 (left_nops,right_nops): Fold into ins_type_counters.
52 * simops.c (trace_input_func): Print new instruction types.
53 Handle OP_R2R3 as input types.
54 (OP_{38000000,7000}): Correctly sign extend bytes.
55 (OP_5E00): Don't count NOPs as parallel instructions.
56 (OP_460B): Remove unused variable.
59 * interp.c (ins_type_counters): Make unsigned long.
60 (left_nops,right_nops): Delete.
61 (most functions): Add prototypes.
62 (INLINE): If GCC and optimize define as __inline__.
63 ({,lookup_}hash,get_operands): Declare as INLINE.
64 (do_parallel): Count conditional operations.
65 (add_commas): New function, to add commas every 3 digits.
66 (sim_size): Call add_commas to print numbers.
67 (sim_{open,resume}): Delete unused variables.
68 (sim_info): Provide better statistics.
69 (sim_read): Add int return type.
71 Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
73 * interp.c (sim_resume): Change the way single-stepping and exceptions
74 are handled so single-stepping works again.
76 Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
78 * endian.c: Optimize simulated loads/stores on x86, AIX, and big
81 * configure.in (--enable-sim-bswap): New switch to enable using
82 the BSWAP instruction on x86's.
83 * configure: Regenerate.
85 * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
88 Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
90 * endian.c: New file. Move endian functions here from interp.c.
91 Optimize code, and make it work as either inline functions or as a
94 * interp.c: Move endian functions from here to endian.c.
96 * Makefile.in (INCLUDE): Add endian.c.
97 (run,libsim.a): Add dependency on endian.o.
98 (endian.o): Add dependency.
100 * d10v_sim.h (read/write support): Always go through the machine
101 independent endian functions. If compiling with GCC and
102 optimizing, include endian.c so the endian functions are inlined.
104 * simops.c (OP_5F00): Correct tracing of accumulators.
106 Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
108 * simops.c (OP_5F00): Add support for getpid, kill system calls.
110 * interp.c (do_{2_short,parallel}): If an exception is raised,
111 don't execute the second instruction.
113 Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
115 * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
116 temporary in case the register is overriden when loading.
117 (OP_6200): Output type is OP_DREG for tracing.
119 Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
121 * d10v_sim.h (struct _state): Add mem_{min,max} fields.
123 * interp.c (sim_size): Initialize mem_{min,max} fields.
124 (sim_write): Update mem_{min,max} fields.
125 (sim_resume): If PC is not in the minimum/maximum memory range,
127 (sim_create_inferior): Preserve mem_{min,max} fields.
129 Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
131 * simops.c (OP_5F00): Add support for time() system call.
133 Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
135 * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
137 (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
140 Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
142 * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
143 (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
144 (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
145 to call/subroutine returns to trace the first two arguments and
146 the return value. For small jumps, use CONSTANT8, not CONSTANT16.
148 Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
150 * interp.c (sim_create_inferior): Reinitialize State every time
151 sim_create_inferior() is called.
153 Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
155 * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
157 (OP_401): Fix tracing information.
159 Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
161 * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
162 (trace_input_func): Use them.
163 (trace_input_func): Make sure there is a trailing space after the
165 (OP_6200): Fix tracing info.
167 * Makefile.in (run): Add dependencies on libbfd.a and
170 Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
172 * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
173 numbers and function names in debug trace.
174 (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
176 (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
177 and exit system call trap being executed.
179 * interp.c (sim_stop_reason): Set exit code correctly for stop
180 instruction and exit system call trap.
182 * configure.in (--enable-sim-cflags): Remove trace case.
183 (--enable-sim-debug): New switch to set the debug values.
184 * configure: Regenerate.
186 * simops.c (trace_{input,output}_func): Rename from
187 trace_{input,output}.
188 (trace_{input,output}): Call trace_{input,output}_func if
189 d10v_debug is non-zero.
190 (SIZE_INSTRUCTION): Cut down to 8.
191 (SIZE_OPERANDS): Cut down to 18.
192 (SIZE_LOCATION): New value for size of line number, function name
194 (init_text_p,text{,_start,_end}): New static variables for
195 printing line number and function name.
196 (exec_bfd): New external that run.c sets.
197 (trace_input_func): Print line number and function name if
198 available and if desired.
199 (OP_4E09): Don't print out DBT message.
200 (OP_5FE0): Set exception field to SIG_D10V_STOP.
201 (OP_5F00): Set exception field to SIG_D10V_EXIT.
203 Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
205 * interp.c (do_2_short): If the instruction encodes jump->ins,
206 don't do the second instruction if the jump succeeds.
208 Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
210 * simops.c (OP_5F00): Use unknown traps to print all GPRs,
211 accumulators, PC, and F0/F1/C flags.
213 Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
215 * simops.c (OP_5F00): Fix problems with system calls.
217 Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
219 * simops.c (OP_5F00): Correct tracing information for trap.
221 Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
223 * Makefile.in (CSEARCH): Correctly find opcodes directory.
225 Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
227 * simops.c (trace_output): Properly align accumulator output.
228 (OP_3{0,2,4}00): Properly parenthesize test expression. Add error
229 if shift count is too high.
230 (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
231 (OP_4E09): Make cpfg properly trace the input flags.
232 (op_types): Add OP_FLAG_OUTPUT.
233 (trace_{input,output}): Support OP_FLAG_OUTPUT.
234 (OP_31000000): This ld2w varient is a 16-bit memory reference, not
235 an 8-bit memory reference instruction for tracing purposes.
236 (OP_201): Addi needs to set the carry.
238 Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
240 * simops.c (OP_2600, OP_2601): Changed min and max comparisons
241 to use signed register values.
243 Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
245 * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
247 (_ins_type): New enumeration to specify which container an
248 instruction is in, and whether it is part of a parallel operation.
249 (_state): Add ins_type field.
250 ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
251 (ins_type_counters): Counters for the various instruction types.
252 ({left,right}_nops): Counters for the number of nops in each
254 (d10v_debug): New variable to indicate whether debugging is turned
257 * simops.c: (all functions): Change all #ifdef DEBUG code so that
258 the input and output values can be traced, along with the
259 instruction type. Make the -t option enable tracing.
260 (all functions): Change printf calls to use the printf_filtered
261 function in the callback table.
263 * interp.c (_leftright): New enumeration to say whether 2 short
264 instructions are done left first or right first.
265 (do_{long,2_short,parallel}): Indicate in the machine state which
266 type of instruction this is. Count each of the types of
267 instructions executed.
268 (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
270 (sim_resume): Pass left/right indication to do_2_short.
271 (all functions): Change printf calls to use the printf_filtered
272 function in the callback table.
273 (sim_trace): Turn on debug flag if DEBUG was defined, and call
275 (sim_info): Print out statistics on instructions.
276 (sim_{trace,create_inferior}): Eliminate extraneous output unless
278 (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
279 Only initialize the hash table the first time sim_open is called.
281 * Makefile.in: Make objects depend on d10v_sim.h.
282 ({,SIM_}CFLAGS): Include configure dependent switches. Setting
283 CFLAGS does not override host/target defines or SIM_CFLAGS.
284 (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
285 (run): By default, the math library is not needed to be linked
287 ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
289 (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
291 ({run,callback}.o): Provide explicit paths to their appropriate
293 (gencode{,.o},d10v-opc.o): Split compilation into creating object
294 and linking. Instead of linking in libopcodes.a, just compile
295 d10v-opc.o directly to handle canadian cross.
296 (CSEARCH): Add opcodes directory.
298 * configure.in (--enable-sim-cflags): New switch to allow user to
300 (CC_FOR_BUILD): Deal with canadian crosses.
301 * configure: Regenerate.
303 Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com>
305 * simops.c: Include correct syscall.h for d10v, not host's.
308 Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
310 * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
311 Add trap 2 to be printf and trap 3 to be putchar.
313 Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com>
315 * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
316 for low-level system calls.
318 Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
320 * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
322 Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
324 * d10v_sim.h (SEXT32): Added.
325 * interp.c: Commented out printfs.
326 * simops.c: Fixed error in sb and st2w.
328 Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
330 * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
331 DSP instructions. Added modulo addressing.
333 Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
335 * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
337 Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
339 * d10v_sim.h, simops.c: Snapshot.
341 Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
343 * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
344 gencode.c, interp.c, simops.c: Created.