Merge branch 'bash-completion' of git://github.com/kerolasa/lelux-utiliteetit

[thirdparty/util-linux.git] / sys-utils / hwclock.c

/*
 * hwclock.c
 *
 * clock.c was written by Charles Hedrick, hedrick@cs.rutgers.edu, Apr 1992
 * Modified for clock adjustments - Rob Hooft <hooft@chem.ruu.nl>, Nov 1992
 * Improvements by Harald Koenig <koenig@nova.tat.physik.uni-tuebingen.de>
 * and Alan Modra <alan@spri.levels.unisa.edu.au>.
 *
 * Major rewrite by Bryan Henderson <bryanh@giraffe-data.com>, 96.09.19.
 * The new program is called hwclock. New features:
 *
 *      - You can set the hardware clock without also modifying the system
 *        clock.
 *      - You can read and set the clock with finer than 1 second precision.
 *      - When you set the clock, hwclock automatically refigures the drift
 *        rate, based on how far off the clock was before you set it.
 *
 * Reshuffled things, added sparc code, and re-added alpha stuff
 * by David Mosberger <davidm@azstarnet.com>
 * and Jay Estabrook <jestabro@amt.tay1.dec.com>
 * and Martin Ostermann <ost@coments.rwth-aachen.de>, aeb@cwi.nl, 990212.
 *
 * Fix for Award 2094 bug, Dave Coffin (dcoffin@shore.net) 11/12/98
 * Change of local time handling, Stefan Ring <e9725446@stud3.tuwien.ac.at>
 * Change of adjtime handling, James P. Rutledge <ao112@rgfn.epcc.edu>.
 *
 * Distributed under GPL
 */
/*
 * Explanation of `adjusting' (Rob Hooft):
 *
 * The problem with my machine is that its CMOS clock is 10 seconds
 * per day slow. With this version of clock.c, and my '/etc/rc.local'
 * reading '/etc/clock -au' instead of '/etc/clock -u -s', this error
 * is automatically corrected at every boot.
 *
 * To do this job, the program reads and writes the file '/etc/adjtime'
 * to determine the correction, and to save its data. In this file are
 * three numbers:
 *
 *      1) the correction in seconds per day. (So if your clock runs 5
 *         seconds per day fast, the first number should read -5.0)
 *      2) the number of seconds since 1/1/1970 the last time the program
 *         was used
 *      3) the remaining part of a second which was leftover after the last
 *         adjustment
 *
 * Installation and use of this program:
 *
 *      a) create a file '/etc/adjtime' containing as the first and only
 *         line: '0.0 0 0.0'
 *      b) run 'clock -au' or 'clock -a', depending on whether your cmos is
 *         in universal or local time. This updates the second number.
 *      c) set your system time using the 'date' command.
 *      d) update your cmos time using 'clock -wu' or 'clock -w'
 *      e) replace the first number in /etc/adjtime by your correction.
 *      f) put the command 'clock -au' or 'clock -a' in your '/etc/rc.local'
 */

#include <errno.h>
#include <getopt.h>
#include <limits.h>
#include <math.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <time.h>
#include <unistd.h>

#define OPTUTILS_EXIT_CODE EX_USAGE

#include "c.h"
#include "closestream.h"
#include "nls.h"
#include "optutils.h"
#include "pathnames.h"
#include "strutils.h"
#include "hwclock.h"
#include "timeutils.h"
#include "env.h"
#include "xalloc.h"

#ifdef HAVE_LIBAUDIT
#include <libaudit.h>
static int hwaudit_fd = -1;
#endif

/* The struct that holds our hardware access routines */
static struct clock_ops *ur;

/* Maximal clock adjustment in seconds per day.
   (adjtime() glibc call has 2145 seconds limit on i386, so it is good enough for us as well,
   43219 is a maximal safe value preventing exact_adjustment overflow.) */
#define MAX_DRIFT 2145.0

struct adjtime {
        /*
         * This is information we keep in the adjtime file that tells us how
         * to do drift corrections. Elements are all straight from the
         * adjtime file, so see documentation of that file for details.
         * Exception is <dirty>, which is an indication that what's in this
         * structure is not what's in the disk file (because it has been
         * updated since read from the disk file).
         */
        bool dirty;
        /* line 1 */
        double drift_factor;
        time_t last_adj_time;
        double not_adjusted;
        /* line 2 */
        time_t last_calib_time;
        /*
         * The most recent time that we set the clock from an external
         * authority (as opposed to just doing a drift adjustment)
         */
        /* line 3 */
        enum a_local_utc { UTC = 0, LOCAL, UNKNOWN } local_utc;
        /*
         * To which time zone, local or UTC, we most recently set the
         * hardware clock.
         */
};

/*
 * time_t to timeval conversion.
 */
static struct timeval t2tv(time_t timet)
{
        struct timeval rettimeval;

        rettimeval.tv_sec = timet;
        rettimeval.tv_usec = 0;
        return rettimeval;
}

/*
 * The difference in seconds between two times in "timeval" format.
 */
double time_diff(struct timeval subtrahend, struct timeval subtractor)
{
        return (subtrahend.tv_sec - subtractor.tv_sec)
            + (subtrahend.tv_usec - subtractor.tv_usec) / 1E6;
}

/*
 * The time, in "timeval" format, which is <increment> seconds after the
 * time <addend>. Of course, <increment> may be negative.
 */
static struct timeval time_inc(struct timeval addend, double increment)
{
        struct timeval newtime;

        newtime.tv_sec = addend.tv_sec + (int)increment;
        newtime.tv_usec = addend.tv_usec + (increment - (int)increment) * 1E6;

        /*
         * Now adjust it so that the microsecond value is between 0 and 1
         * million.
         */
        if (newtime.tv_usec < 0) {
                newtime.tv_usec += 1E6;
                newtime.tv_sec -= 1;
        } else if (newtime.tv_usec >= 1E6) {
                newtime.tv_usec -= 1E6;
                newtime.tv_sec += 1;
        }
        return newtime;
}

static bool
hw_clock_is_utc(const struct hwclock_control *ctl,
                const struct adjtime adjtime)
{
        bool ret;

        if (ctl->utc)
                ret = TRUE;     /* --utc explicitly given on command line */
        else if (ctl->local_opt)
                ret = FALSE;    /* --localtime explicitly given */
        else
                /* get info from adjtime file - default is UTC */
                ret = (adjtime.local_utc != LOCAL);
        if (ctl->debug)
                printf(_("Assuming hardware clock is kept in %s time.\n"),
                       ret ? _("UTC") : _("local"));
        return ret;
}

/*
 * Read the adjustment parameters out of the /etc/adjtime file.
 *
 * Return them as the adjtime structure <*adjtime_p>. If there is no
 * /etc/adjtime file, return defaults. If values are missing from the file,
 * return defaults for them.
 *
 * return value 0 if all OK, !=0 otherwise.
 */
static int read_adjtime(const struct hwclock_control *ctl,
                        struct adjtime *adjtime_p)
{
        FILE *adjfile;
        char line1[81];         /* String: first line of adjtime file */
        char line2[81];         /* String: second line of adjtime file */
        char line3[81];         /* String: third line of adjtime file */

        if (access(ctl->adj_file_name, R_OK) != 0)
                return 0;

        adjfile = fopen(ctl->adj_file_name, "r");       /* open file for reading */
        if (adjfile == NULL) {
                warn(_("cannot open %s"), ctl->adj_file_name);
                return EX_OSFILE;
        }

        if (!fgets(line1, sizeof(line1), adjfile))
                line1[0] = '\0';        /* In case fgets fails */
        if (!fgets(line2, sizeof(line2), adjfile))
                line2[0] = '\0';        /* In case fgets fails */
        if (!fgets(line3, sizeof(line3), adjfile))
                line3[0] = '\0';        /* In case fgets fails */

        fclose(adjfile);

        sscanf(line1, "%lf %ld %lf",
               &adjtime_p->drift_factor,
               &adjtime_p->last_adj_time,
               &adjtime_p->not_adjusted);

        sscanf(line2, "%ld", &adjtime_p->last_calib_time);

        if (!strcmp(line3, "UTC\n")) {
                adjtime_p->local_utc = UTC;
        } else if (!strcmp(line3, "LOCAL\n")) {
                adjtime_p->local_utc = LOCAL;
        } else {
                adjtime_p->local_utc = UNKNOWN;
                if (line3[0]) {
                        warnx(_("Warning: unrecognized third line in adjtime file\n"
                                "(Expected: `UTC' or `LOCAL' or nothing.)"));
                }
        }

        if (ctl->debug) {
                printf(_
                       ("Last drift adjustment done at %ld seconds after 1969\n"),
                       (long)adjtime_p->last_adj_time);
                printf(_("Last calibration done at %ld seconds after 1969\n"),
                       (long)adjtime_p->last_calib_time);
                printf(_("Hardware clock is on %s time\n"),
                       (adjtime_p->local_utc ==
                        LOCAL) ? _("local") : (adjtime_p->local_utc ==
                                               UTC) ? _("UTC") : _("unknown"));
        }

        return 0;
}

/*
 * Wait until the falling edge of the Hardware Clock's update flag so that
 * any time that is read from the clock immediately after we return will be
 * exact.
 *
 * The clock only has 1 second precision, so it gives the exact time only
 * once per second, right on the falling edge of the update flag.
 *
 * We wait (up to one second) either blocked waiting for an rtc device or in
 * a CPU spin loop. The former is probably not very accurate.
 *
 * Return 0 if it worked, nonzero if it didn't.
 */
static int synchronize_to_clock_tick(const struct hwclock_control *ctl)
{
        int rc;

        if (ctl->debug)
                printf(_("Waiting for clock tick...\n"));

        rc = ur->synchronize_to_clock_tick(ctl);

        if (ctl->debug) {
                if (rc)
                        printf(_("...synchronization failed\n"));
                else
                        printf(_("...got clock tick\n"));
        }

        return rc;
}

/*
 * Convert a time in broken down format (hours, minutes, etc.) into standard
 * unix time (seconds into epoch). Return it as *systime_p.
 *
 * The broken down time is argument <tm>. This broken down time is either
 * in local time zone or UTC, depending on value of logical argument
 * "universal". True means it is in UTC.
 *
 * If the argument contains values that do not constitute a valid time, and
 * mktime() recognizes this, return *valid_p == false and *systime_p
 * undefined. However, mktime() sometimes goes ahead and computes a
 * fictional time "as if" the input values were valid, e.g. if they indicate
 * the 31st day of April, mktime() may compute the time of May 1. In such a
 * case, we return the same fictional value mktime() does as *systime_p and
 * return *valid_p == true.
 */
static void
mktime_tz(const struct hwclock_control *ctl, struct tm tm,
          bool *valid_p, time_t *systime_p)
{
        if (ctl->universal)
                *systime_p = timegm(&tm);
        else
                *systime_p = mktime(&tm);
        if (*systime_p == -1) {
                /*
                 * This apparently (not specified in mktime() documentation)
                 * means the 'tm' structure does not contain valid values
                 * (however, not containing valid values does _not_ imply
                 * mktime() returns -1).
                 */
                *valid_p = FALSE;
                if (ctl->debug)
                        printf(_("Invalid values in hardware clock: "
                                 "%4d/%.2d/%.2d %.2d:%.2d:%.2d\n"),
                               tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
                               tm.tm_hour, tm.tm_min, tm.tm_sec);
        } else {
                *valid_p = TRUE;
                if (ctl->debug)
                        printf(_
                               ("Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = "
                                "%ld seconds since 1969\n"), tm.tm_year + 1900,
                               tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, tm.tm_min,
                               tm.tm_sec, (long)*systime_p);
        }
}

/*
 * Read the hardware clock and return the current time via <tm> argument.
 *
 * Use the method indicated by <method> argument to access the hardware
 * clock.
 */
static int
read_hardware_clock(const struct hwclock_control *ctl,
                    bool * valid_p, time_t *systime_p)
{
        struct tm tm;
        int err;

        err = ur->read_hardware_clock(ctl, &tm);
        if (err)
                return err;

        if (ctl->debug)
                printf(_
                       ("Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"),
                       tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour,
                       tm.tm_min, tm.tm_sec);
        mktime_tz(ctl, tm, valid_p, systime_p);

        return 0;
}

/*
 * Set the Hardware Clock to the time <newtime>, in local time zone or UTC,
 * according to <universal>.
 */
static void
set_hardware_clock(const struct hwclock_control *ctl, const time_t newtime)
{
        struct tm new_broken_time;
        /*
         * Time to which we will set Hardware Clock, in broken down format,
         * in the time zone of caller's choice
         */

        if (ctl->universal)
                new_broken_time = *gmtime(&newtime);
        else
                new_broken_time = *localtime(&newtime);

        if (ctl->debug)
                printf(_("Setting Hardware Clock to %.2d:%.2d:%.2d "
                         "= %ld seconds since 1969\n"),
                       new_broken_time.tm_hour, new_broken_time.tm_min,
                       new_broken_time.tm_sec, (long)newtime);

        if (ctl->testing)
                printf(_("Clock not changed - testing only.\n"));
        else {
                ur->set_hardware_clock(ctl, &new_broken_time);
        }
}

/*
 * Set the Hardware Clock to the time "sethwtime", in local time zone or
 * UTC, according to "universal".
 *
 * Wait for a fraction of a second so that "sethwtime" is the value of the
 * Hardware Clock as of system time "refsystime", which is in the past. For
 * example, if "sethwtime" is 14:03:05 and "refsystime" is 12:10:04.5 and
 * the current system time is 12:10:06.0: Wait .5 seconds (to make exactly 2
 * seconds since "refsystime") and then set the Hardware Clock to 14:03:07,
 * thus getting a precise and retroactive setting of the clock.
 *
 * (Don't be confused by the fact that the system clock and the Hardware
 * Clock differ by two hours in the above example. That's just to remind you
 * that there are two independent time scales here).
 *
 * This function ought to be able to accept set times as fractional times.
 * Idea for future enhancement.
 */
static void
set_hardware_clock_exact(const struct hwclock_control *ctl,
                         const time_t sethwtime,
                         const struct timeval refsystime)
{
        /*
         * The Hardware Clock can only be set to any integer time plus one
         * half second.  The integer time is required because there is no
         * interface to set or get a fractional second.  The additional half
         * second is because the Hardware Clock updates to the following
         * second precisely 500 ms (not 1 second!) after you release the
         * divider reset (after setting the new time) - see description of
         * DV2, DV1, DV0 in Register A in the MC146818A data sheet (and note
         * that although that document doesn't say so, real-world code seems
         * to expect that the SET bit in Register B functions the same way).
         * That means that, e.g., when you set the clock to 1:02:03, it
         * effectively really sets it to 1:02:03.5, because it will update to
         * 1:02:04 only half a second later.  Our caller passes the desired
         * integer Hardware Clock time in sethwtime, and the corresponding
         * system time (which may have a fractional part, and which may or may
         * not be the same!) in refsystime.  In an ideal situation, we would
         * then apply sethwtime to the Hardware Clock at refsystime+500ms, so
         * that when the Hardware Clock ticks forward to sethwtime+1s half a
         * second later at refsystime+1000ms, everything is in sync.  So we
         * spin, waiting for gettimeofday() to return a time at or after that
         * time (refsystime+500ms) up to a tolerance value, initially 1ms.  If
         * we miss that time due to being preempted for some other process,
         * then we increase the margin a little bit (initially 1ms, doubling
         * each time), add 1 second (or more, if needed to get a time that is
         * in the future) to both the time for which we are waiting and the
         * time that we will apply to the Hardware Clock, and start waiting
         * again.
         * 
         * For example, the caller requests that we set the Hardware Clock to
         * 1:02:03, with reference time (current system time) = 6:07:08.250.
         * We want the Hardware Clock to update to 1:02:04 at 6:07:09.250 on
         * the system clock, and the first such update will occur 0.500
         * seconds after we write to the Hardware Clock, so we spin until the
         * system clock reads 6:07:08.750.  If we get there, great, but let's
         * imagine the system is so heavily loaded that our process is
         * preempted and by the time we get to run again, the system clock
         * reads 6:07:11.990.  We now want to wait until the next xx:xx:xx.750
         * time, which is 6:07:12.750 (4.5 seconds after the reference time),
         * at which point we will set the Hardware Clock to 1:02:07 (4 seconds
         * after the originally requested time).  If we do that successfully,
         * then at 6:07:13.250 (5 seconds after the reference time), the
         * Hardware Clock will update to 1:02:08 (5 seconds after the
         * originally requested time), and all is well thereafter.
         */

        time_t newhwtime = sethwtime;
        double target_time_tolerance_secs = 0.001;  /* initial value */
        double tolerance_incr_secs = 0.001;         /* initial value */
        const double RTC_SET_DELAY_SECS = 0.5;      /* 500 ms */
        const struct timeval RTC_SET_DELAY_TV = { 0, RTC_SET_DELAY_SECS * 1E6 };

        struct timeval targetsystime;
        struct timeval nowsystime;
        struct timeval prevsystime = refsystime;
        double deltavstarget;

        timeradd(&refsystime, &RTC_SET_DELAY_TV, &targetsystime);

        while (1) {
                double ticksize;

                /* FOR TESTING ONLY: inject random delays of up to 1000ms */
                if (ctl->debug >= 10) {
                        int usec = random() % 1000000;
                        printf(_("sleeping ~%d usec\n"), usec);
                        xusleep(usec);
                }

                gettimeofday(&nowsystime, NULL);
                deltavstarget = time_diff(nowsystime, targetsystime);
                ticksize = time_diff(nowsystime, prevsystime);
                prevsystime = nowsystime;

                if (ticksize < 0) {
                        if (ctl->debug)
                                printf(_("time jumped backward %.6f seconds "
                                         "to %ld.%06ld - retargeting\n"),
                                       ticksize, nowsystime.tv_sec,
                                       nowsystime.tv_usec);
                        /* The retarget is handled at the end of the loop. */
                } else if (deltavstarget < 0) {
                        /* deltavstarget < 0 if current time < target time */
                        if (ctl->debug >= 2)
                                printf(_("%ld.%06ld < %ld.%06ld (%.6f)\n"),
                                       nowsystime.tv_sec,
                                       nowsystime.tv_usec,
                                       targetsystime.tv_sec,
                                       targetsystime.tv_usec,
                                       deltavstarget);
                        continue;  /* not there yet - keep spinning */
                } else if (deltavstarget <= target_time_tolerance_secs) {
                        /* Close enough to the target time; done waiting. */
                        break;
                } else /* (deltavstarget > target_time_tolerance_secs) */ {
                        /*
                         * We missed our window.  Increase the tolerance and
                         * aim for the next opportunity.
                         */
                        if (ctl->debug)
                                printf(_("missed it - %ld.%06ld is too far "
                                         "past %ld.%06ld (%.6f > %.6f)\n"),
                                       nowsystime.tv_sec,
                                       nowsystime.tv_usec,
                                       targetsystime.tv_sec,
                                       targetsystime.tv_usec,
                                       deltavstarget,
                                       target_time_tolerance_secs);
                        target_time_tolerance_secs += tolerance_incr_secs;
                        tolerance_incr_secs *= 2;
                }

                /*
                 * Aim for the same offset (tv_usec) within the second in
                 * either the current second (if that offset hasn't arrived
                 * yet), or the next second.
                 */
                if (nowsystime.tv_usec < targetsystime.tv_usec)
                        targetsystime.tv_sec = nowsystime.tv_sec;
                else
                        targetsystime.tv_sec = nowsystime.tv_sec + 1;
        }

        newhwtime = sethwtime
                    + (int)(time_diff(nowsystime, refsystime)
                            - RTC_SET_DELAY_SECS /* don't count this */
                            + 0.5 /* for rounding */);
        if (ctl->debug)
                printf(_("%ld.%06ld is close enough to %ld.%06ld (%.6f < %.6f)\n"
                         "Set RTC to %ld (%ld + %d; refsystime = %ld.%06ld)\n"),
                       nowsystime.tv_sec, nowsystime.tv_usec,
                       targetsystime.tv_sec, targetsystime.tv_usec,
                       deltavstarget, target_time_tolerance_secs,
                       newhwtime, sethwtime,
                       (int)(newhwtime - sethwtime),
                       refsystime.tv_sec, refsystime.tv_usec);

        set_hardware_clock(ctl, newhwtime);
}

/*
 * Put the time "hwctime" on standard output in display format. Except if
 * hclock_valid == false, just tell standard output that we don't know what
 * time it is.
 */
static void
display_time(const bool hclock_valid, struct timeval hwctime)
{
        if (!hclock_valid)
                warnx(_
                      ("The Hardware Clock registers contain values that are "
                       "either invalid (e.g. 50th day of month) or beyond the range "
                       "we can handle (e.g. Year 2095)."));
        else {
                char buf[ISO_8601_BUFSIZ];

                strtimeval_iso(&hwctime, ISO_8601_DATE|ISO_8601_TIME|ISO_8601_DOTUSEC|
                                         ISO_8601_TIMEZONE|ISO_8601_SPACE,
                                         buf, sizeof(buf));
                printf("%s\n", buf);
        }
}

/*
 * Set the System Clock to time 'newtime'.
 *
 * Also set the kernel time zone value to the value indicated by the TZ
 * environment variable and/or /usr/lib/zoneinfo/, interpreted as tzset()
 * would interpret them.
 *
 * If this is the first call of settimeofday since boot, then this also sets
 * the kernel variable persistent_clock_is_local so that NTP 11 minute mode
 * will update the Hardware Clock with the proper timescale. If the Hardware
 * Clock's timescale configuration is changed then a reboot is required for
 * persistent_clock_is_local to be updated.
 *
 * EXCEPT: if hclock_valid is false, just issue an error message saying
 * there is no valid time in the Hardware Clock to which to set the system
 * time.
 *
 * If 'testing' is true, don't actually update anything -- just say we would
 * have.
 */
static int
set_system_clock(const struct hwclock_control *ctl, const bool hclock_valid,
                 const struct timeval newtime)
{
        int retcode;

        if (!hclock_valid) {
                warnx(_
                      ("The Hardware Clock does not contain a valid time, so "
                       "we cannot set the System Time from it."));
                retcode = 1;
        } else {
                const struct timeval *tv_null = NULL;
                struct tm *broken;
                int minuteswest;
                int rc = 0;

                broken = localtime(&newtime.tv_sec);
#ifdef HAVE_TM_GMTOFF
                minuteswest = -broken->tm_gmtoff / 60;  /* GNU extension */
#else
                minuteswest = timezone / 60;
                if (broken->tm_isdst)
                        minuteswest -= 60;
#endif

                if (ctl->debug) {
                        printf(_("Calling settimeofday:\n"));
                        printf(_("\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"),
                               newtime.tv_sec, newtime.tv_usec);
                        printf(_("\ttz.tz_minuteswest = %d\n"), minuteswest);
                }
                if (ctl->testing) {
                        printf(_
                               ("Not setting system clock because running in test mode.\n"));
                        retcode = 0;
                } else {
                        const struct timezone tz = { minuteswest, 0 };

                        /* Set kernel persistent_clock_is_local so that 11 minute
                         * mode does not clobber the Hardware Clock with UTC. This
                         * is only available on first call of settimeofday after boot.
                         */
                        if (!ctl->universal)
                                rc = settimeofday(tv_null, &tz);
                        if (!rc)
                                rc = settimeofday(&newtime, &tz);
                        if (rc) {
                                if (errno == EPERM) {
                                        warnx(_
                                              ("Must be superuser to set system clock."));
                                        retcode = EX_NOPERM;
                                } else {
                                        warn(_("settimeofday() failed"));
                                        retcode = 1;
                                }
                        } else
                                retcode = 0;
                }
        }
        return retcode;
}

/*
 * Reset the System Clock from local time to UTC, based on its current value
 * and the timezone unless universal is TRUE.
 *
 * Also set the kernel time zone value to the value indicated by the TZ
 * environment variable and/or /usr/lib/zoneinfo/, interpreted as tzset()
 * would interpret them.
 *
 * If 'testing' is true, don't actually update anything -- just say we would
 * have.
 */
static int set_system_clock_timezone(const struct hwclock_control *ctl)
{
        int retcode;
        struct timeval tv;
        struct tm *broken;
        int minuteswest;

        gettimeofday(&tv, NULL);
        if (ctl->debug) {
                struct tm broken_time;
                char ctime_now[200];

                broken_time = *gmtime(&tv.tv_sec);
                strftime(ctime_now, sizeof(ctime_now), "%Y/%m/%d %H:%M:%S",
                         &broken_time);
                printf(_("Current system time: %ld = %s\n"), tv.tv_sec,
                       ctime_now);
        }

        broken = localtime(&tv.tv_sec);
#ifdef HAVE_TM_GMTOFF
        minuteswest = -broken->tm_gmtoff / 60;  /* GNU extension */
#else
        minuteswest = timezone / 60;
        if (broken->tm_isdst)
                minuteswest -= 60;
#endif

        if (ctl->debug) {
                struct tm broken_time;
                char ctime_now[200];

                gettimeofday(&tv, NULL);
                if (!ctl->universal)
                        tv.tv_sec += minuteswest * 60;

                broken_time = *gmtime(&tv.tv_sec);
                strftime(ctime_now, sizeof(ctime_now), "%Y/%m/%d %H:%M:%S",
                         &broken_time);

                printf(_("Calling settimeofday:\n"));
                printf(_("\tUTC: %s\n"), ctime_now);
                printf(_("\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"),
                       tv.tv_sec, tv.tv_usec);
                printf(_("\ttz.tz_minuteswest = %d\n"), minuteswest);
        }
        if (ctl->testing) {
                printf(_
                       ("Not setting system clock because running in test mode.\n"));
                retcode = 0;
        } else {
                const struct timezone tz_utc = { 0, 0 };
                const struct timezone tz = { minuteswest, 0 };
                const struct timeval *tv_null = NULL;
                int rc = 0;

                /* The first call to settimeofday after boot will assume the systemtime
                 * is in localtime, and adjust it according to the given timezone to
                 * compensate. If the systemtime is in fact in UTC, then this is wrong
                 * so we first do a dummy call to make sure the time is not shifted.
                 */
                if (ctl->universal)
                        rc = settimeofday(tv_null, &tz_utc);

                /* Now we set the real timezone. Due to the above dummy call, this will
                 * only warp the systemtime if the RTC is not in UTC. */
                if (!rc)
                        rc = settimeofday(tv_null, &tz);

                if (rc) {
                        if (errno == EPERM) {
                                warnx(_
                                      ("Must be superuser to set system clock."));
                                retcode = EX_NOPERM;
                        } else {
                                warn(_("settimeofday() failed"));
                                retcode = 1;
                        }
                } else
                        retcode = 0;
        }
        return retcode;
}

/*
 * Refresh the last calibrated and last adjusted timestamps in <*adjtime_p>
 * to facilitate future drift calculations based on this set point.
 *
 * With the --update-drift option:
 * Update the drift factor in <*adjtime_p> based on the fact that the
 * Hardware Clock was just calibrated to <nowtime> and before that was
 * set to the <hclocktime> time scale.
 *
 * EXCEPT: if <hclock_valid> is false, assume Hardware Clock was not set
 * before to anything meaningful and regular adjustments have not been done,
 * so don't adjust the drift factor.
 */
static void
adjust_drift_factor(const struct hwclock_control *ctl,
                    struct adjtime *adjtime_p,
                    const struct timeval nowtime,
                    const bool hclock_valid,
                    const struct timeval hclocktime)
{
        if (!ctl->update) {
                if (ctl->debug)
                        printf(_("Not adjusting drift factor because the "
                                 "--update-drift option was not used.\n"));
        } else if (!hclock_valid) {
                if (ctl->debug)
                        printf(_("Not adjusting drift factor because the "
                                 "Hardware Clock previously contained "
                                 "garbage.\n"));
        } else if (adjtime_p->last_calib_time == 0) {
                if (ctl->debug)
                        printf(_("Not adjusting drift factor because last "
                                 "calibration time is zero,\n"
                                 "so history is bad and calibration startover "
                                 "is necessary.\n"));
        } else if ((hclocktime.tv_sec - adjtime_p->last_calib_time) < 4 * 60 * 60) {
                if (ctl->debug)
                        printf(_("Not adjusting drift factor because it has "
                                 "been less than four hours since the last "
                                 "calibration.\n"));
        } else {
                /*
                 * At adjustment time we drift correct the hardware clock
                 * according to the contents of the adjtime file and refresh
                 * its last adjusted timestamp.
                 *
                 * At calibration time we set the Hardware Clock and refresh
                 * both timestamps in <*adjtime_p>.
                 *
                 * Here, with the --update-drift option, we also update the
                 * drift factor in <*adjtime_p>.
                 *
                 * Let us do computation in doubles. (Floats almost suffice,
                 * but 195 days + 1 second equals 195 days in floats.)
                 */
                const double sec_per_day = 24.0 * 60.0 * 60.0;
                double factor_adjust;
                double drift_factor;
                struct timeval last_calib;

                last_calib = t2tv(adjtime_p->last_calib_time);
                /*
                 * Correction to apply to the current drift factor.
                 *
                 * Simplified: uncorrected_drift / days_since_calibration.
                 *
                 * hclocktime is fully corrected with the current drift factor.
                 * Its difference from nowtime is the missed drift correction.
                 */
                factor_adjust = time_diff(nowtime, hclocktime) /
                                (time_diff(nowtime, last_calib) / sec_per_day);

                drift_factor = adjtime_p->drift_factor + factor_adjust;
                if (fabs(drift_factor) > MAX_DRIFT) {
                        if (ctl->debug)
                                printf(_("Clock drift factor was calculated as "
                                         "%f seconds/day.\n"
                                         "It is far too much. Resetting to zero.\n"),
                                       drift_factor);
                        drift_factor = 0;
                } else {
                        if (ctl->debug)
                                printf(_("Clock drifted %f seconds in the past "
                                         "%f seconds\nin spite of a drift factor of "
                                         "%f seconds/day.\n"
                                         "Adjusting drift factor by %f seconds/day\n"),
                                       time_diff(nowtime, hclocktime),
                                       time_diff(nowtime, last_calib),
                                       adjtime_p->drift_factor, factor_adjust);
                }

                adjtime_p->drift_factor = drift_factor;
        }
        adjtime_p->last_calib_time = nowtime.tv_sec;

        adjtime_p->last_adj_time = nowtime.tv_sec;

        adjtime_p->not_adjusted = 0;

        adjtime_p->dirty = TRUE;
}

/*
 * Calculate the drift correction currently needed for the
 * Hardware Clock based on the last time it was adjusted,
 * and the current drift factor, as stored in the adjtime file.
 *
 * The total drift adjustment needed is stored at tdrift_p.
 *
 */
static void
calculate_adjustment(const struct hwclock_control *ctl,
                     const double factor,
                     const time_t last_time,
                     const double not_adjusted,
                     const time_t systime, struct timeval *tdrift_p)
{
        double exact_adjustment;

        exact_adjustment =
            ((double)(systime - last_time)) * factor / (24 * 60 * 60)
            + not_adjusted;
        tdrift_p->tv_sec = (time_t) floor(exact_adjustment);
        tdrift_p->tv_usec = (exact_adjustment -
                                 (double)tdrift_p->tv_sec) * 1E6;
        if (ctl->debug) {
                printf(P_("Time since last adjustment is %ld second\n",
                        "Time since last adjustment is %ld seconds\n",
                       (systime - last_time)),
                       (systime - last_time));
                printf(_("Calculated Hardware Clock drift is %ld.%06ld seconds\n"),
                       tdrift_p->tv_sec, tdrift_p->tv_usec);
        }
}

/*
 * Write the contents of the <adjtime> structure to its disk file.
 *
 * But if the contents are clean (unchanged since read from disk), don't
 * bother.
 */
static void save_adjtime(const struct hwclock_control *ctl,
                         const struct adjtime *adjtime)
{
        char *content;          /* Stuff to write to disk file */
        FILE *fp;
        int err = 0;

        if (!adjtime->dirty)
                return;

        xasprintf(&content, "%f %ld %f\n%ld\n%s\n",
                  adjtime->drift_factor,
                  adjtime->last_adj_time,
                  adjtime->not_adjusted,
                  adjtime->last_calib_time,
                  (adjtime->local_utc == LOCAL) ? "LOCAL" : "UTC");

        if (ctl->testing) {
                printf(_
                       ("Not updating adjtime file because of testing mode.\n"));
                printf(_("Would have written the following to %s:\n%s"),
                       ctl->adj_file_name, content);
                free(content);
                return;
        }

        fp = fopen(ctl->adj_file_name, "w");
        if (fp == NULL) {
                warn(_("Could not open file with the clock adjustment parameters "
                       "in it (%s) for writing"), ctl->adj_file_name);
                err = 1;
        } else if (fputs(content, fp) < 0 || close_stream(fp) != 0) {
                warn(_("Could not update file with the clock adjustment "
                       "parameters (%s) in it"), ctl->adj_file_name);
                err = 1;
        }
        free(content);
        if (err)
                warnx(_("Drift adjustment parameters not updated."));
}

/*
 * Do the adjustment requested, by 1) setting the Hardware Clock (if
 * necessary), and 2) updating the last-adjusted time in the adjtime
 * structure.
 *
 * Do not update anything if the Hardware Clock does not currently present a
 * valid time.
 *
 * <hclock_valid> means the Hardware Clock contains a valid time.
 *
 * <hclocktime> is the drift corrected time read from the Hardware Clock.
 *
 * <read_time> was the system time when the <hclocktime> was read, which due
 * to computational delay could be a short time ago. It is used to define a
 * trigger point for setting the Hardware Clock. The fractional part of the
 * Hardware clock set time is subtracted from read_time to 'refer back', or
 * delay, the trigger point.  Fractional parts must be accounted for in this
 * way, because the Hardware Clock can only be set to a whole second.
 *
 * <universal>: the Hardware Clock is kept in UTC.
 *
 * <testing>:  We are running in test mode (no updating of clock).
 *
 */
static void
do_adjustment(const struct hwclock_control *ctl, struct adjtime *adjtime_p,
              const bool hclock_valid, const struct timeval hclocktime,
              const struct timeval read_time)
{
        if (!hclock_valid) {
                warnx(_("The Hardware Clock does not contain a valid time, "
                        "so we cannot adjust it."));
                adjtime_p->last_calib_time = 0; /* calibration startover is required */
                adjtime_p->last_adj_time = 0;
                adjtime_p->not_adjusted = 0;
                adjtime_p->dirty = TRUE;
        } else if (adjtime_p->last_adj_time == 0) {
                if (ctl->debug)
                        printf(_("Not setting clock because last adjustment time is zero, "
                                 "so history is bad.\n"));
        } else if (fabs(adjtime_p->drift_factor) > MAX_DRIFT) {
                if (ctl->debug)
                        printf(_("Not setting clock because drift factor %f is far too high.\n"),
                                adjtime_p->drift_factor);
        } else {
                set_hardware_clock_exact(ctl, hclocktime.tv_sec,
                                         time_inc(read_time,
                                                  -(hclocktime.tv_usec / 1E6)));
                adjtime_p->last_adj_time = hclocktime.tv_sec;
                adjtime_p->not_adjusted = 0;
                adjtime_p->dirty = TRUE;
        }
}

static void determine_clock_access_method(const struct hwclock_control *ctl)
{
        ur = NULL;

        if (ctl->directisa)
                ur = probe_for_cmos_clock();
#ifdef __linux__
        if (!ur)
                ur = probe_for_rtc_clock(ctl);
#endif
        if (ur) {
                if (ctl->debug)
                        puts(ur->interface_name);

        } else {
                if (ctl->debug)
                        printf(_("No usable clock interface found.\n"));
                warnx(_("Cannot access the Hardware Clock via "
                        "any known method."));
                if (!ctl->debug)
                        warnx(_("Use the --debug option to see the "
                                "details of our search for an access "
                                "method."));
                hwclock_exit(ctl, EX_SOFTWARE);
        }
}

/*
 * Do all the normal work of hwclock - read, set clock, etc.
 *
 * Issue output to stdout and error message to stderr where appropriate.
 *
 * Return rc == 0 if everything went OK, rc != 0 if not.
 */
static int
manipulate_clock(const struct hwclock_control *ctl, const time_t set_time,
                 const struct timeval startup_time, struct adjtime *adjtime)
{
        /* The time at which we read the Hardware Clock */
        struct timeval read_time;
        /*
         * The Hardware Clock gives us a valid time, or at
         * least something close enough to fool mktime().
         */
        bool hclock_valid = FALSE;
        /*
         * Tick synchronized time read from the Hardware Clock and
         * then drift correct for all operations except --show.
         */
        struct timeval hclocktime = { 0, 0 };
        /* Total Hardware Clock drift correction needed. */
        struct timeval tdrift;
        /* local return code */
        int rc = 0;

        if (!ctl->systz && !ctl->predict && ur->get_permissions())
                return EX_NOPERM;

        if ((ctl->set || ctl->systohc || ctl->adjust) &&
            (adjtime->local_utc == UTC) != ctl->universal) {
                adjtime->local_utc = ctl->universal ? UTC : LOCAL;
                adjtime->dirty = TRUE;
        }

        if (ctl->show || ctl->get || ctl->adjust || ctl->hctosys
            || (!ctl->noadjfile && !ctl->systz && !ctl->predict)) {
                /* data from HW-clock are required */
                rc = synchronize_to_clock_tick(ctl);

                /*
                 * We don't error out if the user is attempting to set the
                 * RTC and synchronization timeout happens - the RTC could
                 * be functioning but contain invalid time data so we still
                 * want to allow a user to set the RTC time.
                 */
                if (rc == RTC_BUSYWAIT_FAILED && !ctl->set && !ctl->systohc)
                        return EX_IOERR;
                gettimeofday(&read_time, NULL);

                /*
                 * If we can't synchronize to a clock tick,
                 * we likely can't read from the RTC so
                 * don't bother reading it again.
                 */
                if (!rc) {
                        rc = read_hardware_clock(ctl, &hclock_valid,
                                                 &hclocktime.tv_sec);
                        if (rc && !ctl->set && !ctl->systohc)
                                return EX_IOERR;
                }
        }
        /*
         * Calculate Hardware Clock drift for --predict with the user
         * supplied --date option time, and with the time read from the
         * Hardware Clock for all other operations.  Apply drift correction
         * to the Hardware Clock time for everything except --show and
         * --predict.  For --predict negate the drift correction, because we
         * want to 'predict' a future Hardware Clock time that includes drift.
         */
        hclocktime = ctl->predict ? t2tv(set_time) : hclocktime;
        calculate_adjustment(ctl, adjtime->drift_factor,
                             adjtime->last_adj_time,
                             adjtime->not_adjusted,
                             hclocktime.tv_sec, &tdrift);
        if (!ctl->show && !ctl->predict)
                hclocktime = time_inc(tdrift, hclocktime.tv_sec);
        if (ctl->show || ctl->get) {
                display_time(hclock_valid,
                             time_inc(hclocktime, -time_diff
                                      (read_time, startup_time)));
        } else if (ctl->set) {
                set_hardware_clock_exact(ctl, set_time, startup_time);
                if (!ctl->noadjfile)
                        adjust_drift_factor(ctl, adjtime,
                                            time_inc(t2tv(set_time), time_diff
                                                     (read_time, startup_time)),
                                            hclock_valid, hclocktime);
        } else if (ctl->adjust) {
                if (tdrift.tv_sec > 0 || tdrift.tv_sec < -1)
                        do_adjustment(ctl, adjtime, hclock_valid,
                                      hclocktime, read_time);
                else
                        printf(_("Needed adjustment is less than one second, "
                                 "so not setting clock.\n"));
        } else if (ctl->systohc) {
                struct timeval nowtime, reftime;
                /*
                 * We can only set_hardware_clock_exact to a
                 * whole seconds time, so we set it with
                 * reference to the most recent whole
                 * seconds time.
                 */
                gettimeofday(&nowtime, NULL);
                reftime.tv_sec = nowtime.tv_sec;
                reftime.tv_usec = 0;
                set_hardware_clock_exact(ctl, (time_t) reftime.tv_sec, reftime);
                if (!ctl->noadjfile)
                        adjust_drift_factor(ctl, adjtime, nowtime,
                                            hclock_valid, hclocktime);
        } else if (ctl->hctosys) {
                rc = set_system_clock(ctl, hclock_valid, hclocktime);
                if (rc) {
                        printf(_("Unable to set system clock.\n"));
                        return rc;
                }
        } else if (ctl->systz) {
                rc = set_system_clock_timezone(ctl);
                if (rc) {
                        printf(_("Unable to set system clock.\n"));
                        return rc;
                }
        } else if (ctl->predict) {
                hclocktime = time_inc(hclocktime, (double)
                                      -(tdrift.tv_sec + tdrift.tv_usec / 1E6));
                if (ctl->debug) {
                        printf(_
                               ("At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"),
                               set_time, hclocktime.tv_sec);
                }
                display_time(TRUE, hclocktime);
        }
        if (!ctl->noadjfile)
                save_adjtime(ctl, adjtime);
        return 0;
}

/*
 * Get or set the Hardware Clock epoch value in the kernel, as appropriate.
 * <getepoch>, <setepoch>, and <epoch> are hwclock invocation options.
 *
 * <epoch> == -1 if the user did not specify an "epoch" option.
 */
#ifdef __linux__
/*
 * Maintenance note: This should work on non-Alpha machines, but the
 * evidence today (98.03.04) indicates that the kernel only keeps the epoch
 * value on Alphas. If that is ever fixed, this function should be changed.
 */
# ifndef __alpha__
static void
manipulate_epoch(const struct hwclock_control *ctl __attribute__((__unused__)))
{
        warnx(_("The kernel keeps an epoch value for the Hardware Clock "
                "only on an Alpha machine.\nThis copy of hwclock was built for "
                "a machine other than Alpha\n(and thus is presumably not running "
                "on an Alpha now).  No action taken."));
}
# else
static void
manipulate_epoch(const struct hwclock_control *ctl)
{
        if (ctl->getepoch) {
                unsigned long epoch;

                if (get_epoch_rtc(ctl, &epoch))
                        warnx(_
                              ("Unable to get the epoch value from the kernel."));
                else
                        printf(_("Kernel is assuming an epoch value of %lu\n"),
                               epoch);
        } else if (ctl->setepoch) {
                if (ctl->epoch_option == 0)
                        warnx(_
                              ("To set the epoch value, you must use the 'epoch' "
                               "option to tell to what value to set it."));
                else if (ctl->testing)
                        printf(_
                               ("Not setting the epoch to %lu - testing only.\n"),
                               ctl->epoch_option);
                else if (set_epoch_rtc(ctl))
                        printf(_
                               ("Unable to set the epoch value in the kernel.\n"));
        }
}
# endif         /* __alpha__ */
#endif          /* __linux__ */

static void out_version(void)
{
        printf(UTIL_LINUX_VERSION);
}

/*
 * usage - Output (error and) usage information
 *
 * This function is called both directly from main to show usage information
 * and as fatal function from shhopt if some argument is not understood. In
 * case of normal usage info FMT should be NULL. In that case the info is
 * printed to stdout. If FMT is given usage will act like fprintf( stderr,
 * fmt, ... ), show a usage information and terminate the program
 * afterwards.
 */
static void usage(const struct hwclock_control *ctl, const char *fmt, ...)
{
        FILE *usageto;
        va_list ap;

        usageto = fmt ? stderr : stdout;

        fputs(USAGE_HEADER, usageto);
        fputs(_(" hwclock [function] [option...]\n"), usageto);

        fputs(USAGE_SEPARATOR, usageto);
        fputs(_("Query or set the hardware clock.\n"), usageto);

        fputs(_("\nFunctions:\n"), usageto);
        fputs(_(" -h, --help           show this help text and exit\n"
                " -r, --show           read hardware clock and print result\n"
                "     --get            read hardware clock and print drift corrected result\n"
                "     --set            set the RTC to the time given with --date\n"), usageto);
        fputs(_(" -s, --hctosys        set the system time from the hardware clock\n"
                " -w, --systohc        set the hardware clock from the current system time\n"
                "     --systz          set the system time based on the current timezone\n"
                "     --adjust         adjust the RTC to account for systematic drift since\n"
                "                        the clock was last set or adjusted\n"), usageto);
#ifdef __linux__
        fputs(_("     --getepoch       print out the kernel's hardware clock epoch value\n"
                "     --setepoch       set the kernel's hardware clock epoch value to the \n"
                "                        value given with --epoch\n"), usageto);
#endif
        fputs(_("     --predict        predict RTC reading at time given with --date\n"
                " -V, --version        display version information and exit\n"), usageto);

        fputs(USAGE_OPTIONS, usageto);
        fputs(_(" -u, --utc            the hardware clock is kept in UTC\n"
                "     --localtime      the hardware clock is kept in local time\n"), usageto);
#ifdef __linux__
        fputs(_(" -f, --rtc <file>     special /dev/... file to use instead of default\n"), usageto);
#endif
        fprintf(usageto, _(
                "     --directisa      access the ISA bus directly instead of %s\n"
                "     --date <time>    specifies the time to which to set the hardware clock\n"
                "     --epoch <year>   specifies the year which is the beginning of the\n"
                "                        hardware clock's epoch value\n"), _PATH_RTC_DEV);
        fprintf(usageto, _(
                "     --update-drift   update drift factor in %1$s (requires\n"
                "                        --set or --systohc)\n"
                "     --noadjfile      do not access %1$s; this requires the use of\n"
                "                        either --utc or --localtime\n"
                "     --adjfile <file> specifies the path to the adjust file;\n"
                "                        the default is %1$s\n"), _PATH_ADJTIME);
        fputs(_("     --test           do not update anything, just show what would happen\n"
                " -D, --debug          debugging mode\n" "\n"), usageto);

        if (fmt) {
                va_start(ap, fmt);
                vfprintf(usageto, fmt, ap);
                va_end(ap);
        }

        fflush(usageto);
        hwclock_exit(ctl, fmt ? EX_USAGE : EX_OK);
}

/*
 * Returns:
 *  EX_USAGE: bad invocation
 *  EX_NOPERM: no permission
 *  EX_OSFILE: cannot open /dev/rtc or /etc/adjtime
 *  EX_IOERR: ioctl error getting or setting the time
 *  0: OK (or not)
 *  1: failure
 */
int main(int argc, char **argv)
{
        struct hwclock_control ctl = { NULL };
        struct timeval startup_time;
        struct adjtime adjtime = { 0 };
        struct timespec when = { 0 };
        /*
         * The time we started up, in seconds into the epoch, including
         * fractions.
         */
        time_t set_time = 0;    /* Time to which user said to set Hardware Clock */
        int rc, c;

        /* Long only options. */
        enum {
                OPT_ADJFILE = CHAR_MAX + 1,
                OPT_DATE,
                OPT_DIRECTISA,
                OPT_EPOCH,
                OPT_GET,
                OPT_GETEPOCH,
                OPT_LOCALTIME,
                OPT_NOADJFILE,
                OPT_PREDICT_HC,
                OPT_SET,
                OPT_SETEPOCH,
                OPT_SYSTZ,
                OPT_TEST,
                OPT_UPDATE
        };

        static const struct option longopts[] = {
                { "adjust",       no_argument,       NULL, 'a'            },
                { "help",         no_argument,       NULL, 'h'            },
                { "show",         no_argument,       NULL, 'r'            },
                { "hctosys",      no_argument,       NULL, 's'            },
                { "utc",          no_argument,       NULL, 'u'            },
                { "version",      no_argument,       NULL, 'v'            },
                { "systohc",      no_argument,       NULL, 'w'            },
                { "debug",        no_argument,       NULL, 'D'            },
                { "set",          no_argument,       NULL, OPT_SET        },
#ifdef __linux__
                { "getepoch",     no_argument,       NULL, OPT_GETEPOCH   },
                { "setepoch",     no_argument,       NULL, OPT_SETEPOCH   },
#endif
                { "noadjfile",    no_argument,       NULL, OPT_NOADJFILE  },
                { "localtime",    no_argument,       NULL, OPT_LOCALTIME  },
                { "directisa",    no_argument,       NULL, OPT_DIRECTISA  },
                { "test",         no_argument,       NULL, OPT_TEST       },
                { "date",         required_argument, NULL, OPT_DATE       },
                { "epoch",        required_argument, NULL, OPT_EPOCH      },
#ifdef __linux__
                { "rtc",          required_argument, NULL, 'f'            },
#endif
                { "adjfile",      required_argument, NULL, OPT_ADJFILE    },
                { "systz",        no_argument,       NULL, OPT_SYSTZ      },
                { "predict-hc",   no_argument,       NULL, OPT_PREDICT_HC },
                { "get",          no_argument,       NULL, OPT_GET        },
                { "update-drift", no_argument,       NULL, OPT_UPDATE     },
                { NULL, 0, NULL, 0 }
        };

        static const ul_excl_t excl[] = {       /* rows and cols in ASCII order */
                { 'a','r','s','w',
                  OPT_GET, OPT_GETEPOCH, OPT_PREDICT_HC,
                  OPT_SET, OPT_SETEPOCH, OPT_SYSTZ },
                { 'u', OPT_LOCALTIME},
                { OPT_ADJFILE, OPT_NOADJFILE },
                { OPT_NOADJFILE, OPT_UPDATE },
                { 0 }
        };
        int excl_st[ARRAY_SIZE(excl)] = UL_EXCL_STATUS_INIT;

        /* Remember what time we were invoked */
        gettimeofday(&startup_time, NULL);

#ifdef HAVE_LIBAUDIT
        hwaudit_fd = audit_open();
        if (hwaudit_fd < 0 && !(errno == EINVAL || errno == EPROTONOSUPPORT ||
                                errno == EAFNOSUPPORT)) {
                /*
                 * You get these error codes only when the kernel doesn't
                 * have audit compiled in.
                 */
                warnx(_("Unable to connect to audit system"));
                return EX_NOPERM;
        }
#endif
        setlocale(LC_ALL, "");
#ifdef LC_NUMERIC
        /*
         * We need LC_CTYPE and LC_TIME and LC_MESSAGES, but must avoid
         * LC_NUMERIC since it gives problems when we write to /etc/adjtime.
         *  - gqueri@mail.dotcom.fr
         */
        setlocale(LC_NUMERIC, "C");
#endif
        bindtextdomain(PACKAGE, LOCALEDIR);
        textdomain(PACKAGE);
        atexit(close_stdout);

        while ((c = getopt_long(argc, argv,
                                "?hvVDarsuwAJSFf:", longopts, NULL)) != -1) {

                err_exclusive_options(c, longopts, excl, excl_st);

                switch (c) {
                case 'D':
                        ctl.debug++;
                        break;
                case 'a':
                        ctl.adjust = 1;
                        break;
                case 'r':
                        ctl.show = 1;
                        break;
                case 's':
                        ctl.hctosys = 1;
                        break;
                case 'u':
                        ctl.utc = 1;
                        break;
                case 'w':
                        ctl.systohc = 1;
                        break;
                case OPT_SET:
                        ctl.set = 1;
                        break;
#ifdef __linux__
                case OPT_GETEPOCH:
                        ctl.getepoch = 1;
                        break;
                case OPT_SETEPOCH:
                        ctl.setepoch = 1;
                        break;
#endif
                case OPT_NOADJFILE:
                        ctl.noadjfile = 1;
                        break;
                case OPT_LOCALTIME:
                        ctl.local_opt = 1;      /* --localtime */
                        break;
                case OPT_DIRECTISA:
                        ctl.directisa = 1;
                        break;
                case OPT_TEST:
                        ctl.testing = 1;        /* --test */
                        break;
                case OPT_DATE:
                        ctl.date_opt = optarg;  /* --date */
                        break;
                case OPT_EPOCH:
                        ctl.epoch_option =      /* --epoch */
                            strtoul_or_err(optarg, _("invalid epoch argument"));
                        break;
                case OPT_ADJFILE:
                        ctl.adj_file_name = optarg;     /* --adjfile */
                        break;
                case OPT_SYSTZ:
                        ctl.systz = 1;          /* --systz */
                        break;
                case OPT_PREDICT_HC:
                        ctl.predict = 1;        /* --predict-hc */
                        break;
                case OPT_GET:
                        ctl.get = 1;            /* --get */
                        break;
                case OPT_UPDATE:
                        ctl.update = 1;         /* --update-drift */
                        break;
#ifdef __linux__
                case 'f':
                        ctl.rtc_dev_name = optarg;      /* --rtc */
                        break;
#endif
                case 'v':                       /* --version */
                case 'V':
                        out_version();
                        return 0;
                case 'h':                       /* --help */
                        usage(&ctl, NULL);
                default:
                        errtryhelp(EXIT_FAILURE);
                }
        }

        argc -= optind;
        argv += optind;

#ifdef HAVE_LIBAUDIT
        if (!ctl.testing) {
                if (ctl.adjust || ctl.hctosys || ctl.systohc ||
                    ctl.set || ctl.setepoch) {
                        ctl.hwaudit_on = 1;
                }
        }
#endif
        if (argc > 0) {
                warnx(_("%d too many arguments given"), argc);
                errtryhelp(EXIT_FAILURE);
        }

        if (!ctl.adj_file_name)
                ctl.adj_file_name = _PATH_ADJTIME;

        if (ctl.noadjfile && !ctl.utc && !ctl.local_opt) {
                warnx(_("With --noadjfile, you must specify "
                        "either --utc or --localtime"));
                hwclock_exit(&ctl, EX_USAGE);
        }

        if (ctl.set || ctl.predict) {
                if (parse_date(&when, ctl.date_opt, NULL))
                        set_time = when.tv_sec;
                else {
                        warnx(_("invalid date '%s'"), ctl.date_opt);
                        hwclock_exit(&ctl, EX_USAGE);
                }
        }

        if (!(ctl.show | ctl.set | ctl.systohc | ctl.hctosys |
             ctl.systz | ctl.adjust | ctl.getepoch | ctl.setepoch |
             ctl.predict | ctl.get))
                ctl.show = 1;   /* default to show */

#ifdef __linux__
        if (ctl.getepoch || ctl.setepoch) {
                manipulate_epoch(&ctl);
                hwclock_exit(&ctl, EX_OK);
        }
#endif

        if (ctl.debug)
                out_version();

        if (!ctl.systz && !ctl.predict)
                determine_clock_access_method(&ctl);

        if (!ctl.noadjfile && !(ctl.systz && (ctl.utc || ctl.local_opt))) {
                if ((rc = read_adjtime(&ctl, &adjtime)) != 0)
                        hwclock_exit(&ctl, rc);
        } else
                /* Avoid writing adjtime file if we don't have to. */
                adjtime.dirty = FALSE;
        ctl.universal = hw_clock_is_utc(&ctl, adjtime);
        rc = manipulate_clock(&ctl, set_time, startup_time, &adjtime);
        hwclock_exit(&ctl, rc);
        return rc;              /* Not reached */
}

void __attribute__((__noreturn__))
hwclock_exit(const struct hwclock_control *ctl
#ifndef HAVE_LIBAUDIT
             __attribute__((__unused__))
#endif
             , int status)
{
#ifdef HAVE_LIBAUDIT
        if (ctl->hwaudit_on) {
                audit_log_user_message(hwaudit_fd, AUDIT_USYS_CONFIG,
                                       "op=change-system-time", NULL, NULL, NULL,
                                       status ? 0 : 1);
                close(hwaudit_fd);
        }
#endif
        exit(status);
}

/*
 * History of this program:
 *
 * 98.08.12 BJH Version 2.4
 *
 * Don't use century byte from Hardware Clock. Add comments telling why.
 *
 * 98.06.20 BJH Version 2.3.
 *
 * Make --hctosys set the kernel timezone from TZ environment variable
 * and/or /usr/lib/zoneinfo. From Klaus Ripke (klaus@ripke.com).
 *
 * 98.03.05 BJH. Version 2.2.
 *
 * Add --getepoch and --setepoch.
 *
 * Fix some word length things so it works on Alpha.
 *
 * Make it work when /dev/rtc doesn't have the interrupt functions. In this
 * case, busywait for the top of a second instead of blocking and waiting
 * for the update complete interrupt.
 *
 * Fix a bunch of bugs too numerous to mention.
 *
 * 97.06.01: BJH. Version 2.1. Read and write the century byte (Byte 50) of
 * the ISA Hardware Clock when using direct ISA I/O. Problem discovered by
 * job (jei@iclnl.icl.nl).
 *
 * Use the rtc clock access method in preference to the KDGHWCLK method.
 * Problem discovered by Andreas Schwab <schwab@LS5.informatik.uni-dortmund.de>.
 *
 * November 1996: Version 2.0.1. Modifications by Nicolai Langfeldt
 * (janl@math.uio.no) to make it compile on linux 1.2 machines as well as
 * more recent versions of the kernel. Introduced the NO_CLOCK access method
 * and wrote feature test code to detect absence of rtc headers.
 *
 ***************************************************************************
 * Maintenance notes
 *
 * To compile this, you must use GNU compiler optimization (-O option) in
 * order to make the "extern inline" functions from asm/io.h (inb(), etc.)
 * compile. If you don't optimize, which means the compiler will generate no
 * inline functions, the references to these functions in this program will
 * be compiled as external references. Since you probably won't be linking
 * with any functions by these names, you will have unresolved external
 * references when you link.
 *
 * Here's some info on how we must deal with the time that elapses while
 * this program runs: There are two major delays as we run:
 *
 *      1) Waiting up to 1 second for a transition of the Hardware Clock so
 *         we are synchronized to the Hardware Clock.
 *      2) Running the "date" program to interpret the value of our --date
 *         option.
 *
 * Reading the /etc/adjtime file is the next biggest source of delay and
 * uncertainty.
 *
 * The user wants to know what time it was at the moment he invoked us, not
 * some arbitrary time later. And in setting the clock, he is giving us the
 * time at the moment we are invoked, so if we set the clock some time
 * later, we have to add some time to that.
 *
 * So we check the system time as soon as we start up, then run "date" and
 * do file I/O if necessary, then wait to synchronize with a Hardware Clock
 * edge, then check the system time again to see how much time we spent. We
 * immediately read the clock then and (if appropriate) report that time,
 * and additionally, the delay we measured.
 *
 * If we're setting the clock to a time given by the user, we wait some more
 * so that the total delay is an integral number of seconds, then set the
 * Hardware Clock to the time the user requested plus that integral number
 * of seconds. N.B. The Hardware Clock can only be set in integral seconds.
 *
 * If we're setting the clock to the system clock value, we wait for the
 * system clock to reach the top of a second, and then set the Hardware
 * Clock to the system clock's value.
 *
 * Here's an interesting point about setting the Hardware Clock:  On my
 * machine, when you set it, it sets to that precise time. But one can
 * imagine another clock whose update oscillator marches on a steady one
 * second period, so updating the clock between any two oscillator ticks is
 * the same as updating it right at the earlier tick. To avoid any
 * complications that might cause, we set the clock as soon as possible
 * after an oscillator tick.
 *
 * About synchronizing to the Hardware Clock when reading the time: The
 * precision of the Hardware Clock counters themselves is one second. You
 * can't read the counters and find out that is 12:01:02.5. But if you
 * consider the location in time of the counter's ticks as part of its
 * value, then its precision is as infinite as time is continuous! What I'm
 * saying is this: To find out the _exact_ time in the hardware clock, we
 * wait until the next clock tick (the next time the second counter changes)
 * and measure how long we had to wait. We then read the value of the clock
 * counters and subtract the wait time and we know precisely what time it
 * was when we set out to query the time.
 *
 * hwclock uses this method, and considers the Hardware Clock to have
 * infinite precision.
 */