sys-utils/kbdrate.c

   1 /*
   2 From: faith@cs.unc.edu (Rik Faith)
   3 Subject: User mode keyboard rate changer
   4 Date: 27 Apr 92 13:44:26 GMT
   5
   6 I put together this program, called kbdrate.c, which will reset the keyboard
   7 repeat rate and delay in user mode.  The program must have read/write
   8 access to /dev/port, so if /dev/port is only read/writeable by group port,
   9 then kbdrate must run setgid to group port (for example).
  10
  11 The "rate" is the rate in characters per second
  12
  13 The "delay" is the amount of time the key must remain depressed before it
  14 will start to repeat.
  15
  16 Usage examples:
  17
  18 kbdrate                 set rate to IBM default (10.9 cps, 250mS delay)
  19 kbdrate -r 30.0         set rate to 30 cps and delay to 250mS
  20 kbdrate -r 20.0 -s      set rate to 20 cps (delay 250mS) -- don't print message
  21 kbdrate -r 0 -d 0       set rate to 2.0 cps and delay to 250 mS
  22
  23 I find it useful to put kbdrate in my /etc/rc file so that the keyboard
  24 rate is set to something that I find comfortable at boot time.  This sure
  25 beats rebuilding the kernel!
  26
  27
  28   kbdrate.c -- Set keyboard typematic rate (and delay)
  29   Created: Thu Apr 23 12:24:30 1992
  30   Author: Rickard E. Faith, faith@cs.unc.edu
  31
  32   Copyright 1992 Rickard E. Faith.  Distributed under the GPL.
  33   This program comes with ABSOLUTELY NO WARRANTY.
  34   Usage: kbdrate [-r rate] [-d delay] [-s]
  35          Rate can range from 2.0 to 30.0 (units are characters per second)
  36          Delay can range from 250 to 1000 (units are milliseconds)
  37          -s suppressed message
  38   Compiles under gcc 2.1 for Linux (tested with the pre-0.96 kernel)
  39
  40   Wed Jun 22 21:35:43 1994, faith@cs.unc.edu:
  41             Changed valid_rates per suggestion by Andries.Brouwer@cwi.nl.
  42   Wed Jun 22 22:18:29 1994, faith@cs.unc.edu:
  43             Added patch for AUSTIN notebooks from John Bowman
  44             (bowman@hagar.ph.utexas.edu)
  45
  46   Linux/68k modifications by Roman Hodek
  47                                 (Roman.Hodek@informatik.uni-erlangen.de):
  48
  49   Reading/writing the Intel I/O ports via /dev/port is not the
  50   English way... Such hardware dependant stuff can never work on
  51   other architectures.
  52
  53   Linux/68k has an new ioctl for setting the keyboard repeat rate
  54   and delay. Both values are counted in msecs, the kernel will do
  55   any rounding to values possible with the underlying hardware.
  56
  57   kbdrate now first tries if the KDKBDREP ioctl is available. If it
  58   is, it is used, else the old method is applied.
  59
  60 */
  61
  62 #include <stdio.h>
  63 #include <unistd.h>
  64 #include <stdlib.h>
  65 #include <errno.h>
  66 #include <sys/file.h>
  67 #include <sys/ioctl.h>
  68 #include <linux/version.h>
  69 #if LINUX_VERSION_CODE >= 131072
  70 /* Kd.h is not available with all linux versions.  131072 is equivalent
  71    to linux 2.0.0 */
  72 #include <linux/kd.h>
  73 #endif
  74
  75 #define VERSION "1.3"
  76
  77 static int valid_rates[] = { 300, 267, 240, 218, 200, 185, 171, 160, 150,
  78                                    133, 120, 109, 100, 92, 86, 80, 75, 67,
  79                                    60, 55, 50, 46, 43, 40, 37, 33, 30, 27,
  80                                    25, 23, 21, 20 };
  81 #define RATE_COUNT (sizeof( valid_rates ) / sizeof( int ))
  82
  83 static int valid_delays[] = { 250, 500, 750, 1000 };
  84 #define DELAY_COUNT (sizeof( valid_delays ) / sizeof( int ))
  85
  86 #ifdef KDKBDREP
  87 static int ioctl_possible = 0;
  88 struct kbd_repeat kbdrep_s;
  89 #endif
  90
  91 int main( int argc, char **argv )
  92 {
  93    double      rate = 10.9;     /* Default rate */
  94    int         delay = 250;     /* Default delay */
  95    int         value = 0x7f;    /* Maximum delay with slowest rate */
  96                                 /* DO NOT CHANGE this value */
  97    int         silent = 0;
  98    int         fd;
  99    char        data;
 100    int         c;
 101    int         i;
 102    extern char *optarg;
 103
 104    while ( (c = getopt( argc, argv, "r:d:sv" )) != EOF )
 105          switch (c) {
 106          case 'r':
 107             rate = atof( optarg );
 108             break;
 109          case 'd':
 110             delay = atoi( optarg );
 111             break;
 112          case 's':
 113             silent = 1;
 114             break;
 115          case 'v':
 116             fprintf( stderr, "util-linux kbdrate " VERSION "\n");
 117             exit(0);
 118          }
 119
 120 #ifdef KDKBDREP
 121    kbdrep_s.rate = -1; /* don't change, just test */
 122    kbdrep_s.delay = -1;
 123    if (ioctl( 0, KDKBDREP, &kbdrep_s )) {
 124      if (errno == EINVAL)
 125        ioctl_possible = 0;
 126      else {
 127        perror( "ioctl(KDKBDREP)" );
 128        exit( 1 );
 129      }
 130    } else ioctl_possible = 1;
 131
 132    if (ioctl_possible) {
 133      kbdrep_s.rate  = 1000.0 / rate; /* convert cps to msec */
 134      if (kbdrep_s.rate < 1) kbdrep_s.rate = 1;
 135      kbdrep_s.delay = delay;
 136      if (kbdrep_s.delay < 1) kbdrep_s.delay = 1;
 137
 138      if (ioctl( 0, KDKBDREP, &kbdrep_s )) {
 139        perror( "ioctl(KDKBDREP)" );
 140        exit( 1 );
 141      }
 142
 143      if (!silent)
 144        printf( "Typematic Rate set to %.1f cps (delay = %d mS)\n",
 145                1000.0 / (double)kbdrep_s.rate, kbdrep_s.delay );
 146    } else {
 147 #endif
 148
 149     /* The ioport way */
 150
 151     for (i = 0; i < RATE_COUNT; i++)
 152       if (rate * 10 >= valid_rates[i]) {
 153         value &= 0x60;
 154         value |= i;
 155         break;
 156       }
 157
 158
 159       for (i = 0; i < DELAY_COUNT; i++)
 160         if (delay <= valid_delays[i]) {
 161           value &= 0x1f;
 162           value |= i << 5;
 163           break;
 164         }
 165
 166       if ( (fd = open( "/dev/port", O_RDWR )) < 0) {
 167         perror( "Cannot open /dev/port" );
 168         exit( 1 );
 169       }
 170
 171       do {
 172         lseek( fd, 0x64, 0 );
 173         read( fd, &data, 1 );
 174       } while ((data & 2) == 2 );  /* wait */
 175
 176       lseek( fd, 0x60, 0 );
 177       data = 0xf3;                 /* set typematic rate */
 178       write( fd, &data, 1 );
 179
 180       do {
 181         lseek( fd, 0x64, 0 );
 182         read( fd, &data, 1 );
 183       } while ((data & 2) == 2 );  /* wait */
 184
 185       lseek( fd, 0x60, 0 );
 186       sleep( 1 );
 187       write( fd, &value, 1 );
 188
 189       close( fd );
 190
 191       if (!silent) printf( "Typematic Rate set to %.1f cps (delay = %d mS)\n",
 192                            valid_rates[value & 0x1f] / 10.0,
 193                            valid_delays[ (value & 0x60) >> 5 ] );
 194
 195 #ifdef KDKBREP
 196    }
 197 #endif
 198
 199    return 0;
 200 }