+#endif /* not WITH_COMMON */
+
+
+#if WITH_COMMON
+
+/* For compatibility */
+SIM_DESC simulator;
+
+/* These default values correspond to expected usage for the chip. */
+
+SIM_DESC
+sim_open (kind, cb, abfd, argv)
+ SIM_OPEN_KIND kind;
+ host_callback *cb;
+ struct bfd *abfd;
+ char **argv;
+{
+ SIM_DESC sd = sim_state_alloc (kind, cb);
+ mn10300_callback = cb;
+
+ SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+
+ /* for compatibility */
+ simulator = sd;
+
+ /* FIXME: should be better way of setting up interrupts. For
+ moment, only support watchpoints causing a breakpoint (gdb
+ halt). */
+ STATE_WATCHPOINTS (sd)->pc = &(PC);
+ STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC);
+ STATE_WATCHPOINTS (sd)->interrupt_handler = NULL;
+ STATE_WATCHPOINTS (sd)->interrupt_names = NULL;
+
+ if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
+ return 0;
+ sim_add_option_table (sd, NULL, mn10300_options);
+
+ /* Allocate core managed memory */
+ sim_do_command (sd, "memory region 0,0x100000");
+ sim_do_command (sd, "memory region 0x40000000,0x200000");
+
+ /* getopt will print the error message so we just have to exit if this fails.
+ FIXME: Hmmm... in the case of gdb we need getopt to call
+ print_filtered. */
+ if (sim_parse_args (sd, argv) != SIM_RC_OK)
+ {
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ sim_module_uninstall (sd);
+ return 0;
+ }
+
+ if ( NULL != board
+ && (strcmp(board, BOARD_AM32) == 0 ) )
+ {
+ /* environment */
+ STATE_ENVIRONMENT (sd) = OPERATING_ENVIRONMENT;
+
+ sim_do_command (sd, "memory region 0x44000000,0x40000");
+ sim_do_command (sd, "memory region 0x48000000,0x400000");
+
+ /* device support for mn1030002 */
+ /* interrupt controller */
+
+ sim_hw_parse (sd, "/mn103int@0x34000100/reg 0x34000100 0x7C 0x34000200 0x8 0x34000280 0x8");
+
+ /* DEBUG: NMI input's */
+ sim_hw_parse (sd, "/glue@0x30000000/reg 0x30000000 12");
+ sim_hw_parse (sd, "/glue@0x30000000 > int0 nmirq /mn103int");
+ sim_hw_parse (sd, "/glue@0x30000000 > int1 watchdog /mn103int");
+ sim_hw_parse (sd, "/glue@0x30000000 > int2 syserr /mn103int");
+
+ /* DEBUG: ACK input */
+ sim_hw_parse (sd, "/glue@0x30002000/reg 0x30002000 4");
+ sim_hw_parse (sd, "/glue@0x30002000 > int ack /mn103int");
+
+ /* DEBUG: LEVEL output */
+ sim_hw_parse (sd, "/glue@0x30004000/reg 0x30004000 8");
+ sim_hw_parse (sd, "/mn103int > nmi int0 /glue@0x30004000");
+ sim_hw_parse (sd, "/mn103int > level int1 /glue@0x30004000");
+
+ /* DEBUG: A bunch of interrupt inputs */
+ sim_hw_parse (sd, "/glue@0x30006000/reg 0x30006000 32");
+ sim_hw_parse (sd, "/glue@0x30006000 > int0 irq-0 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int1 irq-1 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int2 irq-2 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int3 irq-3 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int4 irq-4 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int5 irq-5 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int6 irq-6 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int7 irq-7 /mn103int");
+
+ /* processor interrupt device */
+
+ /* the device */
+ sim_hw_parse (sd, "/mn103cpu@0x20000000");
+ sim_hw_parse (sd, "/mn103cpu@0x20000000/reg 0x20000000 0x42");
+
+ /* DEBUG: ACK output wired upto a glue device */
+ sim_hw_parse (sd, "/glue@0x20002000");
+ sim_hw_parse (sd, "/glue@0x20002000/reg 0x20002000 4");
+ sim_hw_parse (sd, "/mn103cpu > ack int0 /glue@0x20002000");
+
+ /* DEBUG: RESET/NMI/LEVEL wired up to a glue device */
+ sim_hw_parse (sd, "/glue@0x20004000");
+ sim_hw_parse (sd, "/glue@0x20004000/reg 0x20004000 12");
+ sim_hw_parse (sd, "/glue@0x20004000 > int0 reset /mn103cpu");
+ sim_hw_parse (sd, "/glue@0x20004000 > int1 nmi /mn103cpu");
+ sim_hw_parse (sd, "/glue@0x20004000 > int2 level /mn103cpu");
+
+ /* REAL: The processor wired up to the real interrupt controller */
+ sim_hw_parse (sd, "/mn103cpu > ack ack /mn103int");
+ sim_hw_parse (sd, "/mn103int > level level /mn103cpu");
+ sim_hw_parse (sd, "/mn103int > nmi nmi /mn103cpu");
+
+
+ /* PAL */
+
+ /* the device */
+ sim_hw_parse (sd, "/pal@0x31000000");
+ sim_hw_parse (sd, "/pal@0x31000000/reg 0x31000000 64");
+ sim_hw_parse (sd, "/pal@0x31000000/poll? true");
+
+ /* DEBUG: PAL wired up to a glue device */
+ sim_hw_parse (sd, "/glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000/reg 0x31002000 16");
+ sim_hw_parse (sd, "/pal@0x31000000 > countdown int0 /glue@0x31002000");
+ sim_hw_parse (sd, "/pal@0x31000000 > timer int1 /glue@0x31002000");
+ sim_hw_parse (sd, "/pal@0x31000000 > int int2 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int0 int3 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int1 int3 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int2 int3 /glue@0x31002000");
+
+ /* REAL: The PAL wired up to the real interrupt controller */
+ sim_hw_parse (sd, "/pal@0x31000000 > countdown irq-0 /mn103int");
+ sim_hw_parse (sd, "/pal@0x31000000 > timer irq-1 /mn103int");
+ sim_hw_parse (sd, "/pal@0x31000000 > int irq-2 /mn103int");
+
+ /* 8 and 16 bit timers */
+ sim_hw_parse (sd, "/mn103tim@0x34001000/reg 0x34001000 36 0x34001080 100 0x34004000 16");
+
+ /* Hook timer interrupts up to interrupt controller */
+ sim_hw_parse (sd, "/mn103tim > timer-0-underflow timer-0-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-1-underflow timer-1-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-2-underflow timer-2-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-3-underflow timer-3-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-4-underflow timer-4-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-5-underflow timer-5-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-underflow timer-6-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-compare-a timer-6-compare-a /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-compare-b timer-6-compare-b /mn103int");
+
+
+ /* Serial devices 0,1,2 */
+ sim_hw_parse (sd, "/mn103ser@0x34000800/reg 0x34000800 48");
+ sim_hw_parse (sd, "/mn103ser@0x34000800/poll? true");
+
+ /* Hook serial interrupts up to interrupt controller */
+ sim_hw_parse (sd, "/mn103ser > serial-0-receive serial-0-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-0-transmit serial-0-transmit /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-1-receive serial-1-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-1-transmit serial-1-transmit /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-2-receive serial-2-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-2-transmit serial-2-transmit /mn103int");
+
+ sim_hw_parse (sd, "/mn103iop@0x36008000/reg 0x36008000 8 0x36008020 8 0x36008040 0xc 0x36008060 8 0x36008080 8");
+
+ /* Memory control registers */
+ sim_do_command (sd, "memory region 0x32000020,0x30");
+ /* Cache control register */
+ sim_do_command (sd, "memory region 0x20000070,0x4");
+ /* Cache purge regions */
+ sim_do_command (sd, "memory region 0x28400000,0x800");
+ sim_do_command (sd, "memory region 0x28401000,0x800");
+ /* DMA registers */
+ sim_do_command (sd, "memory region 0x32000100,0xF");
+ sim_do_command (sd, "memory region 0x32000200,0xF");
+ sim_do_command (sd, "memory region 0x32000400,0xF");
+ sim_do_command (sd, "memory region 0x32000800,0xF");
+ }
+ else
+ {
+ if (board != NULL)
+ {
+ sim_io_eprintf (sd, "Error: Board `%s' unknown.\n", board);
+ return 0;
+ }
+ }
+
+
+
+ /* check for/establish the a reference program image */
+ if (sim_analyze_program (sd,
+ (STATE_PROG_ARGV (sd) != NULL
+ ? *STATE_PROG_ARGV (sd)
+ : NULL),
+ abfd) != SIM_RC_OK)
+ {
+ sim_module_uninstall (sd);
+ return 0;
+ }
+
+ /* establish any remaining configuration options */
+ if (sim_config (sd) != SIM_RC_OK)
+ {
+ sim_module_uninstall (sd);
+ return 0;
+ }
+
+ if (sim_post_argv_init (sd) != SIM_RC_OK)
+ {
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ sim_module_uninstall (sd);
+ return 0;
+ }
+
+
+ /* set machine specific configuration */
+/* STATE_CPU (sd, 0)->psw_mask = (PSW_NP | PSW_EP | PSW_ID | PSW_SAT */
+/* | PSW_CY | PSW_OV | PSW_S | PSW_Z); */
+
+ return sd;
+}
+
+
+void
+sim_close (sd, quitting)
+ SIM_DESC sd;
+ int quitting;
+{
+ sim_module_uninstall (sd);
+}
+
+
+SIM_RC
+sim_create_inferior (sd, prog_bfd, argv, env)
+ SIM_DESC sd;
+ struct bfd *prog_bfd;
+ char **argv;
+ char **env;
+{
+ memset (&State, 0, sizeof (State));
+ if (prog_bfd != NULL) {
+ PC = bfd_get_start_address (prog_bfd);
+ } else {
+ PC = 0;
+ }
+ CIA_SET (STATE_CPU (sd, 0), (unsigned64) PC);
+
+ return SIM_RC_OK;
+}
+
+void
+sim_do_command (sd, cmd)
+ SIM_DESC sd;
+ char *cmd;
+{
+ char *mm_cmd = "memory-map";
+ char *int_cmd = "interrupt";
+
+ if (sim_args_command (sd, cmd) != SIM_RC_OK)
+ {
+ if (strncmp (cmd, mm_cmd, strlen (mm_cmd) == 0))
+ sim_io_eprintf (sd, "`memory-map' command replaced by `sim memory'\n");
+ else if (strncmp (cmd, int_cmd, strlen (int_cmd)) == 0)
+ sim_io_eprintf (sd, "`interrupt' command replaced by `sim watch'\n");
+ else
+ sim_io_eprintf (sd, "Unknown command `%s'\n", cmd);
+ }
+}
+#endif /* WITH_COMMON */
+
+/* FIXME These would more efficient to use than load_mem/store_mem,
+ but need to be changed to use the memory map. */
+
+uint8
+get_byte (x)
+ uint8 *x;
+{
+ return *x;
+}
+
+uint16
+get_half (x)
+ uint8 *x;
+{
+ uint8 *a = x;
+ return (a[1] << 8) + (a[0]);
+}
+
+uint32
+get_word (x)
+ uint8 *x;
+{
+ uint8 *a = x;
+ return (a[3]<<24) + (a[2]<<16) + (a[1]<<8) + (a[0]);
+}
+
+void
+put_byte (addr, data)
+ uint8 *addr;
+ uint8 data;
+{
+ uint8 *a = addr;
+ a[0] = data;
+}
+
+void
+put_half (addr, data)
+ uint8 *addr;
+ uint16 data;
+{
+ uint8 *a = addr;
+ a[0] = data & 0xff;
+ a[1] = (data >> 8) & 0xff;
+}
+
+void
+put_word (addr, data)
+ uint8 *addr;
+ uint32 data;
+{
+ uint8 *a = addr;
+ a[0] = data & 0xff;
+ a[1] = (data >> 8) & 0xff;
+ a[2] = (data >> 16) & 0xff;
+ a[3] = (data >> 24) & 0xff;
+}
+
+int
+sim_fetch_register (sd, rn, memory, length)
+ SIM_DESC sd;
+ int rn;
+ unsigned char *memory;
+ int length;
+{
+ put_word (memory, State.regs[rn]);
+ return -1;
+}
+
+int
+sim_store_register (sd, rn, memory, length)
+ SIM_DESC sd;
+ int rn;
+ unsigned char *memory;
+ int length;
+{
+ State.regs[rn] = get_word (memory);
+ return -1;
+}
+
+
+void
+mn10300_core_signal (SIM_DESC sd,
+ sim_cpu *cpu,
+ sim_cia cia,
+ unsigned map,
+ int nr_bytes,
+ address_word addr,
+ transfer_type transfer,
+ sim_core_signals sig)
+{
+ const char *copy = (transfer == read_transfer ? "read" : "write");
+ address_word ip = CIA_ADDR (cia);
+
+ switch (sig)
+ {
+ case sim_core_unmapped_signal:
+ sim_io_eprintf (sd, "mn10300-core: %d byte %s to unmapped address 0x%lx at 0x%lx\n",
+ nr_bytes, copy,
+ (unsigned long) addr, (unsigned long) ip);
+ program_interrupt(sd, cpu, cia, SIM_SIGSEGV);
+ break;
+
+ case sim_core_unaligned_signal:
+ sim_io_eprintf (sd, "mn10300-core: %d byte %s to unaligned address 0x%lx at 0x%lx\n",
+ nr_bytes, copy,
+ (unsigned long) addr, (unsigned long) ip);
+ program_interrupt(sd, cpu, cia, SIM_SIGBUS);
+ break;
+
+ default:
+ sim_engine_abort (sd, cpu, cia,
+ "mn10300_core_signal - internal error - bad switch");
+ }
+}
+
+
+void
+program_interrupt (SIM_DESC sd,
+ sim_cpu *cpu,
+ sim_cia cia,
+ SIM_SIGNAL sig)
+{
+ int status;
+ struct hw *device;
+ static int in_interrupt = 0;
+
+#ifdef SIM_CPU_EXCEPTION_TRIGGER
+ SIM_CPU_EXCEPTION_TRIGGER(sd,cpu,cia);
+#endif
+
+ /* avoid infinite recursion */
+ if (in_interrupt)
+ {
+ (*mn10300_callback->printf_filtered) (mn10300_callback,
+ "ERROR: recursion in program_interrupt during software exception dispatch.");
+ }
+ else
+ {
+ in_interrupt = 1;
+ /* copy NMI handler code from dv-mn103cpu.c */
+ store_word (SP - 4, CIA_GET (cpu));
+ store_half (SP - 8, PSW);
+
+ /* Set the SYSEF flag in NMICR by backdoor method. See
+ dv-mn103int.c:write_icr(). This is necessary because
+ software exceptions are not modelled by actually talking to
+ the interrupt controller, so it cannot set its own SYSEF
+ flag. */
+ if ((NULL != board) && (strcmp(board, BOARD_AM32) == 0))
+ store_byte (0x34000103, 0x04);
+ }
+
+ PSW &= ~PSW_IE;
+ SP = SP - 8;
+ CIA_SET (cpu, 0x40000008);
+
+ in_interrupt = 0;
+ sim_engine_halt(sd, cpu, NULL, cia, sim_stopped, sig);
+}
+
+
+void
+mn10300_cpu_exception_trigger(SIM_DESC sd, sim_cpu* cpu, address_word cia)
+{
+ ASSERT(cpu != NULL);
+
+ if(State.exc_suspended > 0)
+ sim_io_eprintf(sd, "Warning, nested exception triggered (%d)\n", State.exc_suspended);
+
+ CIA_SET (cpu, cia);
+ memcpy(State.exc_trigger_regs, State.regs, sizeof(State.exc_trigger_regs));
+ State.exc_suspended = 0;
+}
+
+void
+mn10300_cpu_exception_suspend(SIM_DESC sd, sim_cpu* cpu, int exception)
+{
+ ASSERT(cpu != NULL);
+
+ if(State.exc_suspended > 0)
+ sim_io_eprintf(sd, "Warning, nested exception signal (%d then %d)\n",
+ State.exc_suspended, exception);
+
+ memcpy(State.exc_suspend_regs, State.regs, sizeof(State.exc_suspend_regs));
+ memcpy(State.regs, State.exc_trigger_regs, sizeof(State.regs));
+ CIA_SET (cpu, PC); /* copy PC back from new State.regs */
+ State.exc_suspended = exception;
+}
+
+void
+mn10300_cpu_exception_resume(SIM_DESC sd, sim_cpu* cpu, int exception)
+{
+ ASSERT(cpu != NULL);
+
+ if(exception == 0 && State.exc_suspended > 0)
+ {
+ if(State.exc_suspended != SIGTRAP) /* warn not for breakpoints */
+ sim_io_eprintf(sd, "Warning, resuming but ignoring pending exception signal (%d)\n",
+ State.exc_suspended);
+ }
+ else if(exception != 0 && State.exc_suspended > 0)
+ {
+ if(exception != State.exc_suspended)
+ sim_io_eprintf(sd, "Warning, resuming with mismatched exception signal (%d vs %d)\n",
+ State.exc_suspended, exception);
+
+ memcpy(State.regs, State.exc_suspend_regs, sizeof(State.regs));
+ CIA_SET (cpu, PC); /* copy PC back from new State.regs */
+ }
+ else if(exception != 0 && State.exc_suspended == 0)
+ {
+ sim_io_eprintf(sd, "Warning, ignoring spontanous exception signal (%d)\n", exception);
+ }
+ State.exc_suspended = 0;
+}