+ - add 'name' field to metadata type and use it.
+ - use validate_geometry more
+ - metadata should be able to check/reject bitmap stuff.
+
+DDF:
+ Three new metadata types:
+ ddf - used only to create a container.
+ ddf-bvd - used to create an array in a container
+ ddf-svd - used to create a secondary array from bvds.
+
+ Usage:
+ mdadm -C /dev/ddf1 /dev/sd[abcdef]
+ mdadm -C /dev/md1 -e ddf /dev/sd[a-f]
+ mdadm -C /dev/md1 -l container /dev/sd[a-f]
+
+ Each of these create a new ddf container using all those
+ devices. The name 'ddf*' signals that ddf metadata should be used.
+ '-e ddf' only supports one level - 'container'. 'container' is only
+ supported by ddf.
+
+ mdadm -C /dev/md1 -l0 -n4 /dev/ddf1 # or maybe not ???
+ mdadm -C /dev/md1 -l1 -n2 /dev/sda /dev/sdb
+ If exactly one device is given, and it is a container, we select
+ devices from that container.
+ If devices are given that are already in use, they must be in use by
+ a container, and the array is created in the container.
+ If devices given are bvds, we slip under the hood to make
+ the svd arrays.
+
+ mdadm -A /dev/ddf ......
+ base drives make a container. Anything in that container is started
+ auto-read-only.
+ if /dev/ddf is already assembled, we assemble bvds and svds inside it.
+
+
+2005-dec-20
+ Want an incremental assembly mode to work nicely with udev.
+ Core usage would be something like
+ mdadm --incr-assemble /dev/newdevice
+ This would
+ - examine the device to determine uuid etc.
+ - look for a match in /etc/mdadm.conf, abort if not found
+ - find that device and collect current contents
+ - perform an 'assemble' analysis to make sure we have the best set of devices.
+ - remove or add devices as appropriate
+ - possibly start the array if it was complete
+
+ Other usages could involve
+ - specify which array to auto-add to.
+ This requires an existing array for uuid matching... is there any point?
+
+ -
+
+
+2004-june-02
+ * Don't print 'errors' flag, it is meaningless. DONE
+ * Handle new superblock format
+ * create device file on demand, particularly partitionable devices. DONE
+ BUT figure a way to create the partition devices.
+ auto=partN
+ * Use Event: interface to listen for events. DONE, untested
+ * Make sure mdadm -As can assemble multi-level RAIDs ok.
+ * --build to build raid1 or multipath arrays
+ clean or not ???
+
+----------------------------------------------------------------------------
+* mdadm --monitor to monitor failed multipath paths and re-instate them.
+
+* Maybe make "--help" fit in 80x24 and have a --long-help with more info. DONE
+
+
* maybe "missing" instead of <bold>missing</> in doco DONE
* possibly wait for resync to start, or even finish while assembling.- NO
- mdadm -S /dev/md0 /dev/md1 gives internal error FIXED
-- mdadm --detail --scan print summary of what it can find?
+- mdadm --detail --scan print summary of what it can find? DONE
---------