-/* tc-tahoe.c
- Not part of GAS yet. */
+/* This file is tc-tahoe.c
+
+ Copyright 1987, 1988, 1989, 1990, 1991, 1992, 1995, 2000, 2001, 2002,
+ 2003, 2004, 2005 Free Software Foundation, Inc.
+
+ This file is part of GAS, the GNU Assembler.
+
+ GAS is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ GAS is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
#include "as.h"
+#include "safe-ctype.h"
#include "obstack.h"
-/* this bit glommed from tahoe-inst.h */
+/* This bit glommed from tahoe-inst.h. */
typedef unsigned char byte;
typedef byte tahoe_opcodeT;
-/*
- * This is part of tahoe-ins-parse.c & friends.
- * We want to parse a tahoe instruction text into a tree defined here.
- */
+/* This is part of tahoe-ins-parse.c & friends.
+ We want to parse a tahoe instruction text into a tree defined here. */
-#define TIT_MAX_OPERANDS (4) /* maximum number of operands in one
- single tahoe instruction */
+#define TIT_MAX_OPERANDS 4 /* Maximum number of operands in one
+ single tahoe instruction. */
-struct top /* tahoe instruction operand */
-{
- int top_ndx; /* -1, or index register. eg 7=[R7] */
- int top_reg; /* -1, or register number. eg 7 = R7 or (R7) */
- byte top_mode; /* Addressing mode byte. This byte, defines
- which of the 11 modes opcode is. */
+struct top /* Tahoe instruction operand. */
+ {
+ int top_ndx; /* -1, or index register. eg 7=[R7]. */
+ int top_reg; /* -1, or register number. eg 7 = R7 or (R7). */
+ byte top_mode; /* Addressing mode byte. This byte, defines
+ which of the 11 modes opcode is. */
- char top_access; /* Access type wanted for this opperand
- 'b'branch ' 'no-instruction 'amrvw' */
- char top_width; /* Operand width expected, one of "bwlq?-:!" */
+ char top_access; /* Access type wanted for this operand
+ 'b'branch ' 'no-instruction 'amrvw'. */
+ char top_width; /* Operand width expected, one of "bwlq?-:!". */
- char *top_error; /* Say if operand is inappropriate */
+ char * top_error; /* Say if operand is inappropriate. */
- segT seg_of_operand; /* segment as returned by expression()*/
+ segT seg_of_operand; /* Segment as returned by expression(). */
- expressionS exp_of_operand; /* The expression as parsed by expression()*/
+ expressionS exp_of_operand; /* The expression as parsed by expression(). */
- byte top_dispsize; /* Number of bytes in the displacement if we
- can figure it out */
-};
+ byte top_dispsize; /* Number of bytes in the displacement if we
+ can figure it out. */
+ };
-/* The addressing modes for an operand. These numbers are the acutal values
- for certain modes, so be carefull if you screw with them. */
-#define TAHOE_DIRECT_REG (0x50)
-#define TAHOE_REG_DEFERRED (0x60)
+/* The addressing modes for an operand. These numbers are the actual values
+ for certain modes, so be careful if you screw with them. */
+#define TAHOE_DIRECT_REG 0x50
+#define TAHOE_REG_DEFERRED 0x60
-#define TAHOE_REG_DISP (0xE0)
-#define TAHOE_REG_DISP_DEFERRED (0xF0)
+#define TAHOE_REG_DISP 0xE0
+#define TAHOE_REG_DISP_DEFERRED 0xF0
-#define TAHOE_IMMEDIATE (0x8F)
-#define TAHOE_IMMEDIATE_BYTE (0x88)
-#define TAHOE_IMMEDIATE_WORD (0x89)
-#define TAHOE_IMMEDIATE_LONGWORD (0x8F)
-#define TAHOE_ABSOLUTE_ADDR (0x9F)
+#define TAHOE_IMMEDIATE 0x8F
+#define TAHOE_IMMEDIATE_BYTE 0x88
+#define TAHOE_IMMEDIATE_WORD 0x89
+#define TAHOE_IMMEDIATE_LONGWORD 0x8F
+#define TAHOE_ABSOLUTE_ADDR 0x9F
-#define TAHOE_DISPLACED_RELATIVE (0xEF)
-#define TAHOE_DISP_REL_DEFERRED (0xFF)
+#define TAHOE_DISPLACED_RELATIVE 0xEF
+#define TAHOE_DISP_REL_DEFERRED 0xFF
-#define TAHOE_AUTO_DEC (0x7E)
-#define TAHOE_AUTO_INC (0x8E)
-#define TAHOE_AUTO_INC_DEFERRED (0x9E)
-/* INDEXED_REG is decided by the existance or lack of a [reg] */
+#define TAHOE_AUTO_DEC 0x7E
+#define TAHOE_AUTO_INC 0x8E
+#define TAHOE_AUTO_INC_DEFERRED 0x9E
+/* INDEXED_REG is decided by the existence or lack of a [reg]. */
/* These are encoded into top_width when top_access=='b'
- and it's a psuedo op.*/
+ and it's a psuedo op. */
#define TAHOE_WIDTH_ALWAYS_JUMP '-'
#define TAHOE_WIDTH_CONDITIONAL_JUMP '?'
#define TAHOE_WIDTH_BIG_REV_JUMP '!'
#define TAHOE_WIDTH_BIG_NON_REV_JUMP ':'
/* The hex code for certain tahoe commands and modes.
- This is just for readability. */
-#define TAHOE_JMP (0x71)
-#define TAHOE_PC_REL_LONG (0xEF)
-#define TAHOE_BRB (0x11)
-#define TAHOE_BRW (0x13)
+ This is just for readability. */
+#define TAHOE_JMP 0x71
+#define TAHOE_PC_REL_LONG 0xEF
+#define TAHOE_BRB 0x11
+#define TAHOE_BRW 0x13
/* These, when 'ored' with, or added to, a register number,
- set up the number for the displacement mode. */
-#define TAHOE_PC_OR_BYTE (0xA0)
-#define TAHOE_PC_OR_WORD (0xC0)
-#define TAHOE_PC_OR_LONG (0xE0)
+ set up the number for the displacement mode. */
+#define TAHOE_PC_OR_BYTE 0xA0
+#define TAHOE_PC_OR_WORD 0xC0
+#define TAHOE_PC_OR_LONG 0xE0
-struct tit /* get it out of the sewer, it stands for
- tahoe instruction tree (Geeze!) */
+struct tit /* Get it out of the sewer, it stands for
+ tahoe instruction tree (Geeze!). */
{
- tahoe_opcodeT tit_opcode; /* The opcode. */
- byte tit_operands; /* How many operands are here. */
- struct top tit_operand[TIT_MAX_OPERANDS]; /* Operands */
- char *tit_error; /* "" or fatal error text */
+ tahoe_opcodeT tit_opcode; /* The opcode. */
+ byte tit_operands; /* How many operands are here. */
+ struct top tit_operand[TIT_MAX_OPERANDS]; /* Operands. */
+ char *tit_error; /* "" or fatal error text. */
};
/* end: tahoe-inst.h */
/* tahoe.c - tahoe-specific -
- Not part of gas yet.
- */
+ Not part of gas yet. */
#include "opcode/tahoe.h"
-/* This is the number to put at the beginning of the a.out file */
+/* This is the number to put at the beginning of the a.out file. */
long omagic = OMAGIC;
/* These chars start a comment anywhere in a source file (except inside
- another comment or a quoted string. */
+ another comment or a quoted string. */
const char comment_chars[] = "#;";
-/* These chars only start a comment at the beginning of a line. */
+/* These chars only start a comment at the beginning of a line. */
const char line_comment_chars[] = "#";
-/* Chars that can be used to separate mant from exp in floating point nums */
+/* Chars that can be used to separate mant from exp in floating point nums. */
const char EXP_CHARS[] = "eE";
/* Chars that mean this number is a floating point constant
as in 0f123.456
or 0d1.234E-12 (see exp chars above)
Note: The Tahoe port doesn't support floating point constants. This is
- consistant with 'as' If it's needed, I can always add it later. */
+ consistent with 'as' If it's needed, I can always add it later. */
const char FLT_CHARS[] = "df";
/* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be
changed in read.c . Ideally it shouldn't have to know about it at all,
but nothing is ideal around here.
- (The tahoe has plenty of room, so the change currently isn't needed.)
- */
+ (The tahoe has plenty of room, so the change currently isn't needed.) */
-static struct tit t; /* A tahoe instruction after decoding. */
+static struct tit t; /* A tahoe instruction after decoding. */
void float_cons ();
/* A table of pseudo ops (sans .), the function called, and an integer op
- that the function is called with. */
+ that the function is called with. */
const pseudo_typeS md_pseudo_table[] =
{
{0}
};
\f
-/*
- * For Tahoe, relative addresses of "just the right length" are pretty easy.
- * The branch displacement is always the last operand, even in
- * synthetic instructions.
- * For Tahoe, we encode the relax_substateTs (in e.g. fr_substate) as:
- *
- * 4 3 2 1 0 bit number
- * ---/ /--+-------+-------+-------+-------+-------+
- * | what state ? | how long ? |
- * ---/ /--+-------+-------+-------+-------+-------+
- *
- * The "how long" bits are 00=byte, 01=word, 10=long.
- * This is a Un*x convention.
- * Not all lengths are legit for a given value of (what state).
- * The four states are listed below.
- * The "how long" refers merely to the displacement length.
- * The address usually has some constant bytes in it as well.
- *
-
-States for Tahoe address relaxing.
-1. TAHOE_WIDTH_ALWAYS_JUMP (-)
+/* For Tahoe, relative addresses of "just the right length" are pretty easy.
+ The branch displacement is always the last operand, even in
+ synthetic instructions.
+ For Tahoe, we encode the relax_substateTs (in e.g. fr_substate) as:
+
+ 4 3 2 1 0 bit number
+ ---/ /--+-------+-------+-------+-------+-------+
+ | what state ? | how long ? |
+ ---/ /--+-------+-------+-------+-------+-------+
+
+ The "how long" bits are 00=byte, 01=word, 10=long.
+ This is a Un*x convention.
+ Not all lengths are legit for a given value of (what state).
+ The four states are listed below.
+ The "how long" refers merely to the displacement length.
+ The address usually has some constant bytes in it as well.
+
+ States for Tahoe address relaxing.
+ 1. TAHOE_WIDTH_ALWAYS_JUMP (-)
Format: "b-"
Tahoe opcodes are: (Hex)
jr 11
Always, 1 byte opcode, then displacement/absolute.
If word or longword, change opcode to brw or jmp.
-
-2. TAHOE_WIDTH_CONDITIONAL_JUMP (?)
+ 2. TAHOE_WIDTH_CONDITIONAL_JUMP (?)
J<cond> where <cond> is a simple flag test.
Format: "b?"
Tahoe opcodes are: (Hex)
Always, you complement 4th bit to reverse the condition.
Always, 1-byte opcode, then 1-byte displacement.
-3. TAHOE_WIDTH_BIG_REV_JUMP (!)
+ 3. TAHOE_WIDTH_BIG_REV_JUMP (!)
Jbc/Jbs where cond tests a memory bit.
Format: "rlvlb!"
Tahoe opcodes are: (Hex)
Always, you complement 4th bit to reverse the condition.
Always, 1-byte opcde, longword, longword-address, 1-word-displacement
-4. TAHOE_WIDTH_BIG_NON_REV_JUMP (:)
+ 4. TAHOE_WIDTH_BIG_NON_REV_JUMP (:)
JaoblXX/Jbssi
Format: "rlmlb:"
Tahoe opcodes are: (Hex)
Always, we cannot reverse the sense of the branch; we have a word
displacement.
-We need to modify the opcode is for class 1, 2 and 3 instructions.
-After relax() we may complement the 4th bit of 2 or 3 to reverse sense of
-branch.
+ We need to modify the opcode is for class 1, 2 and 3 instructions.
+ After relax() we may complement the 4th bit of 2 or 3 to reverse sense of
+ branch.
-We sometimes store context in the operand literal. This way we can figure out
-after relax() what the original addressing mode was. (Was is pc_rel, or
-pc_rel_disp? That sort of thing.) */
+ We sometimes store context in the operand literal. This way we can figure out
+ after relax() what the original addressing mode was. (Was is pc_rel, or
+ pc_rel_disp? That sort of thing.) */
\f
/* These displacements are relative to the START address of the
displacement which is at the start of the displacement, not the end of
to them. (WF + length(word))
The first letter is Byte, Word.
- 2nd letter is Forward, Backward. */
-#define BF (1+ 127)
-#define BB (1+-128)
-#define WF (2+ 32767)
-#define WB (2+-32768)
+ 2nd letter is Forward, Backward. */
+#define BF (1 + 127)
+#define BB (1 + -128)
+#define WF (2 + 32767)
+#define WB (2 + -32768)
/* Dont need LF, LB because they always reach. [They are coded as 0.] */
-#define C(a,b) ENCODE_RELAX(a,b)
-/* This macro has no side-effects. */
+#define C(a,b) ENCODE_RELAX(a, b)
+/* This macro has no side-effects. */
#define ENCODE_RELAX(what,length) (((what) << 2) + (length))
-#define RELAX_STATE(what) ((what) >> 2)
-#define RELAX_LENGTH(length) ((length) && 3)
+#define RELAX_STATE(s) ((s) >> 2)
+#define RELAX_LENGTH(s) ((s) & 3)
-#define STATE_ALWAYS_BRANCH (1)
-#define STATE_CONDITIONAL_BRANCH (2)
-#define STATE_BIG_REV_BRANCH (3)
-#define STATE_BIG_NON_REV_BRANCH (4)
-#define STATE_PC_RELATIVE (5)
+#define STATE_ALWAYS_BRANCH 1
+#define STATE_CONDITIONAL_BRANCH 2
+#define STATE_BIG_REV_BRANCH 3
+#define STATE_BIG_NON_REV_BRANCH 4
+#define STATE_PC_RELATIVE 5
-#define STATE_BYTE (0)
-#define STATE_WORD (1)
-#define STATE_LONG (2)
-#define STATE_UNDF (3) /* Symbol undefined in pass1 */
+#define STATE_BYTE 0
+#define STATE_WORD 1
+#define STATE_LONG 2
+#define STATE_UNDF 3 /* Symbol undefined in pass1. */
/* This is the table used by gas to figure out relaxing modes. The fields are
forward_branch reach, backward_branch reach, number of bytes it would take,
- where the next biggest branch is. */
+ where the next biggest branch is. */
const relax_typeS md_relax_table[] =
{
{
1, 1, 0, 0
- }, /* error sentinel 0,0 */
+ }, /* Error sentinel 0,0 */
{
1, 1, 0, 0
- }, /* unused 0,1 */
+ }, /* Unused 0,1 */
{
1, 1, 0, 0
- }, /* unused 0,2 */
+ }, /* Unused 0,2 */
{
1, 1, 0, 0
- }, /* unused 0,3 */
+ }, /* Unused 0,3 */
/* Unconditional branch cases "jrb"
The relax part is the actual displacement */
{
BF, BB, 1, C (1, 1)
- }, /* brb B`foo 1,0 */
+ }, /* Brb B`foo 1,0 */
{
WF, WB, 2, C (1, 2)
- }, /* brw W`foo 1,1 */
+ }, /* Brw W`foo 1,1 */
{
0, 0, 5, 0
}, /* Jmp L`foo 1,2 */
{
1, 1, 0, 0
- }, /* unused 1,3 */
+ }, /* Unused 1,3 */
/* Reversible Conditional Branch. If the branch won't reach, reverse
it, and jump over a brw or a jmp that will reach. The relax part is the
- actual address. */
+ actual address. */
{
BF, BB, 1, C (2, 1)
}, /* b<cond> B`foo 2,0 */
}, /* brev over, jmp L`foo, over: 2,2 */
{
1, 1, 0, 0
- }, /* unused 2,3 */
-/* Another type of reversable branch. But this only has a word
- displacement. */
+ }, /* Unused 2,3 */
+/* Another type of reversible branch. But this only has a word
+ displacement. */
{
1, 1, 0, 0
- }, /* unused 3,0 */
+ }, /* Unused 3,0 */
{
WF, WB, 2, C (3, 2)
}, /* jbX W`foo 3,1 */
}, /* jrevX over, jmp L`foo, over: 3,2 */
{
1, 1, 0, 0
- }, /* unused 3,3 */
-/* These are the non reversable branches, all of which have a word
+ }, /* Unused 3,3 */
+/* These are the non reversible branches, all of which have a word
displacement. If I can't reach, branch over a byte branch, to a
jump that will reach. The jumped branch jumps over the reaching
branch, to continue with the flow of the program. It's like playing
- leap frog. */
+ leap frog. */
{
1, 1, 0, 0
- }, /* unused 4,0 */
+ }, /* Unused 4,0 */
{
WF, WB, 2, C (4, 2)
}, /* aobl_ W`foo 4,1 */
}, /*aobl_ W`hop,br over,hop: jmp L^foo,over 4,2*/
{
1, 1, 0, 0
- }, /* unused 4,3 */
+ }, /* Unused 4,3 */
/* Normal displacement mode, no jumping or anything like that.
The relax points to one byte before the address, thats why all
- the numbers are up by one. */
+ the numbers are up by one. */
{
BF + 1, BB + 1, 2, C (5, 1)
}, /* B^"foo" 5,0 */
}, /* L^"foo" 5,2 */
{
1, 1, 0, 0
- }, /* unused 5,3 */
+ }, /* Unused 5,3 */
};
#undef C
#undef BB
#undef WF
#undef WB
-/* End relax stuff */
+/* End relax stuff. */
\f
/* Handle of the OPCODE hash table. NULL means any use before
md_begin() will crash. */
static struct hash_control *op_hash;
-/* Init function. Build the hash table. */
+/* Init function. Build the hash table. */
+
void
-md_begin ()
+md_begin (void)
{
struct tot *tP;
char *errorval = 0;
- int synthetic_too = 1; /* If 0, just use real opcodes. */
+ int synthetic_too = 1; /* If 0, just use real opcodes. */
op_hash = hash_new ();
as_fatal (errorval);
}
\f
-CONST char *md_shortopts = "ad:STt:V";
-struct option md_longopts[] = {
+const char *md_shortopts = "ad:STt:V";
+
+struct option md_longopts[] =
+{
{NULL, no_argument, NULL, 0}
};
-size_t md_longopts_size = sizeof(md_longopts);
+
+size_t md_longopts_size = sizeof (md_longopts);
int
-md_parse_option (c, arg)
- int c;
- char *arg;
+md_parse_option (int c, char *arg)
{
switch (c)
{
}
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
- fprintf(stream, _("\
+ fprintf (stream, _("\
Tahoe options:\n\
-a ignored\n\
-d LENGTH ignored\n\
\f
/* The functions in this section take numbers in the machine format, and
munges them into Tahoe byte order.
- They exist primarily for cross assembly purpose. */
-void /* Knows about order of bytes in address. */
-md_number_to_chars (con, value, nbytes)
- char con[]; /* Return 'nbytes' of chars here. */
- valueT value; /* The value of the bits. */
- int nbytes; /* Number of bytes in the output. */
-{
- number_to_chars_bigendian (con, value, nbytes);
-}
+ They exist primarily for cross assembly purpose.
+ Knows about order of bytes in address. */
-#ifdef comment
-void /* Knows about order of bytes in address. */
-md_number_to_imm (con, value, nbytes)
- char con[]; /* Return 'nbytes' of chars here. */
- long int value; /* The value of the bits. */
- int nbytes; /* Number of bytes in the output. */
+void
+md_number_to_chars (char con[], /* Return 'nbytes' of chars here. */
+ valueT value, /* The value of the bits. */
+ int nbytes) /* Number of bytes in the output. */
{
- md_number_to_chars (con, value, nbytes);
+ number_to_chars_bigendian (con, value, nbytes);
}
-#endif /* comment */
-
void
-tc_apply_fix (fixP, val)
- fixS *fixP;
- long val;
+md_apply_fix3 (fixS *fixP ATTRIBUTE_UNUSED,
+ valueT * valP ATTRIBUTE_UNUSED,
+ segT seg ATTRIBUTE_UNUSED)
{
- /* should never be called */
+ /* Should never be called. */
know (0);
}
-void /* Knows about order of bytes in address. */
-md_number_to_disp (con, value, nbytes)
- char con[]; /* Return 'nbytes' of chars here. */
- long int value; /* The value of the bits. */
- int nbytes; /* Number of bytes in the output. */
+void
+md_number_to_disp (char con[]m /* Return 'nbytes' of chars here. */
+ long int value, /* The value of the bits. */
+ int nbytes) /* Number of bytes in the output. */
{
md_number_to_chars (con, value, nbytes);
}
-void /* Knows about order of bytes in address. */
-md_number_to_field (con, value, nbytes)
- char con[]; /* Return 'nbytes' of chars here. */
- long int value; /* The value of the bits. */
- int nbytes; /* Number of bytes in the output. */
+void
+md_number_to_field (char con[], /* Return 'nbytes' of chars here. */
+ long int value, /* The value of the bits. */
+ int nbytes) /* Number of bytes in the output. */
{
md_number_to_chars (con, value, nbytes);
}
next three bytes are symbolnum, in kind of 3 byte big endian (least sig. byte last).
The last byte is broken up with bit 7 as pcrel,
bits 6 & 5 as length,
- bit 4 as extern and the last nibble as 'undefined'. */
+ bit 4 as extern and the last nibble as 'undefined'. */
-#if comment
void
-md_ri_to_chars (ri_p, ri)
- struct relocation_info *ri_p, ri;
-{
- byte the_bytes[sizeof (struct relocation_info)];
- /* The reason I can't just encode these directly into ri_p is that
- ri_p may point to ri. */
-
- /* This is easy */
- md_number_to_chars (the_bytes, ri.r_address, sizeof (ri.r_address));
-
- /* now the fun stuff */
- the_bytes[4] = (ri.r_symbolnum >> 16) & 0x0ff;
- the_bytes[5] = (ri.r_symbolnum >> 8) & 0x0ff;
- the_bytes[6] = ri.r_symbolnum & 0x0ff;
- the_bytes[7] = (((ri.r_extern << 4) & 0x10) | ((ri.r_length << 5) & 0x60) |
- ((ri.r_pcrel << 7) & 0x80)) & 0xf0;
-
- bcopy (the_bytes, (char *) ri_p, sizeof (struct relocation_info));
-}
-
-#endif /* comment */
-
-/* Put the bits in an order that a tahoe will understand, despite the ordering
- of the native machine.
- On Tahoe: first 4 bytes are normal unsigned big endian long,
- next three bytes are symbolnum, in kind of 3 byte big endian (least sig. byte last).
- The last byte is broken up with bit 7 as pcrel,
- bits 6 & 5 as length,
- bit 4 as extern and the last nibble as 'undefined'. */
-
-void
-tc_aout_fix_to_chars (where, fixP, segment_address_in_file)
- char *where;
- fixS *fixP;
- relax_addressT segment_address_in_file;
+tc_aout_fix_to_chars (char *where,
+ fixS *fixP,
+ relax_addressT segment_address_in_file)
{
long r_symbolnum;
| ((!S_IS_DEFINED (fixP->fx_addsy) << 4) & 0x10));
}
-/* Relocate byte stuff */
+/* Relocate byte stuff. */
\f
-/* This is for broken word. */
-const int md_short_jump_size = 3;
+/* This is for broken word. */
+int md_short_jump_size = 3;
void
-md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag;
- symbolS *to_symbol;
+md_create_short_jump (char *ptr,
+ addressT from_addr,
+ addressT to_addr,
+ fragS *frag,
+ symbolS *to_symbol)
{
valueT offset;
md_number_to_chars (ptr, offset, 2);
}
-const int md_long_jump_size = 6;
-const int md_reloc_size = 8; /* Size of relocation record */
+int md_long_jump_size = 6;
+const int md_reloc_size = 8; /* Size of relocation record. */
void
-md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag;
- symbolS *to_symbol;
+md_create_long_jump (char *ptr,
+ addressT from_addr,
+ addressT to_addr,
+ fragS *frag,
+ symbolS *to_symbol)
{
valueT offset;
md_number_to_chars (ptr, offset, 4);
}
\f
-/*
- * md_estimate_size_before_relax()
- *
- * Called just before relax().
- * Any symbol that is now undefined will not become defined, so we assumed
- * that it will be resolved by the linker.
- * Return the correct fr_subtype in the frag, for relax()
- * Return the initial "guess for fr_var" to caller. (How big I think this
- * will be.)
- * The guess for fr_var is ACTUALLY the growth beyond fr_fix.
- * Whatever we do to grow fr_fix or fr_var contributes to our returned value.
- * Although it may not be explicit in the frag, pretend fr_var starts with a
- * 0 value.
- */
+/* md_estimate_size_before_relax(), called just before relax().
+ Any symbol that is now undefined will not become defined.
+ Return the correct fr_subtype in the frag and the growth beyond
+ fr_fix. */
+
int
-md_estimate_size_before_relax (fragP, segment_type)
- register fragS *fragP;
- segT segment_type; /* N_DATA or N_TEXT. */
+md_estimate_size_before_relax (fragS *fragP, segT segment_type)
{
- register char *p;
- register int old_fr_fix;
- /* int pc_rel; FIXME: remove this */
-
- old_fr_fix = fragP->fr_fix;
- switch (fragP->fr_subtype)
+ if (RELAX_LENGTH (fragP->fr_subtype) == STATE_UNDF)
{
- case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
+ if (S_GET_SEGMENT (fragP->fr_symbol) != segment)
{
- /* The symbol was in the same segment as the opcode, and it's
- a real pc_rel case so it's a relaxable case. */
- fragP->fr_subtype = ENCODE_RELAX (STATE_PC_RELATIVE, STATE_BYTE);
- }
- else
- {
- /* This case is still undefined, so asume it's a long word for the
- linker to fix. */
- p = fragP->fr_literal + old_fr_fix;
- *p |= TAHOE_PC_OR_LONG;
- /* We now know how big it will be, one long word. */
- fragP->fr_fix += 1 + 4;
- fix_new (fragP, old_fr_fix + 1, fragP->fr_symbol,
- fragP->fr_offset, FX_PCREL32, NULL);
- frag_wane (fragP);
- }
- break;
+ /* Non-relaxable cases. */
+ char *p;
+ int old_fr_fix;
- case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
- {
- fragP->fr_subtype = ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_BYTE);
- }
- else
- {
+ old_fr_fix = fragP->fr_fix;
p = fragP->fr_literal + old_fr_fix;
- *fragP->fr_opcode ^= 0x10; /* Reverse sense of branch. */
- *p++ = 6;
- *p++ = TAHOE_JMP;
- *p++ = TAHOE_PC_REL_LONG;
- fragP->fr_fix += 1 + 1 + 1 + 4;
- fix_new (fragP, old_fr_fix + 3, fragP->fr_symbol,
- fragP->fr_offset, FX_PCREL32, NULL);
+ switch (RELAX_STATE (fragP->fr_subtype))
+ {
+ case STATE_PC_RELATIVE:
+ *p |= TAHOE_PC_OR_LONG;
+ /* We now know how big it will be, one long word. */
+ fragP->fr_fix += 1 + 4;
+ fix_new (fragP, old_fr_fix + 1, fragP->fr_symbol,
+ fragP->fr_offset, FX_PCREL32, NULL);
+ break;
+
+ case STATE_CONDITIONAL_BRANCH:
+ *fragP->fr_opcode ^= 0x10; /* Reverse sense of branch. */
+ *p++ = 6;
+ *p++ = TAHOE_JMP;
+ *p++ = TAHOE_PC_REL_LONG;
+ fragP->fr_fix += 1 + 1 + 1 + 4;
+ fix_new (fragP, old_fr_fix + 3, fragP->fr_symbol,
+ fragP->fr_offset, FX_PCREL32, NULL);
+ break;
+
+ case STATE_BIG_REV_BRANCH:
+ *fragP->fr_opcode ^= 0x10; /* Reverse sense of branch. */
+ *p++ = 0;
+ *p++ = 6;
+ *p++ = TAHOE_JMP;
+ *p++ = TAHOE_PC_REL_LONG;
+ fragP->fr_fix += 2 + 2 + 4;
+ fix_new (fragP, old_fr_fix + 4, fragP->fr_symbol,
+ fragP->fr_offset, FX_PCREL32, NULL);
+ break;
+
+ case STATE_BIG_NON_REV_BRANCH:
+ *p++ = 2;
+ *p++ = 0;
+ *p++ = TAHOE_BRB;
+ *p++ = 6;
+ *p++ = TAHOE_JMP;
+ *p++ = TAHOE_PC_REL_LONG;
+ fragP->fr_fix += 2 + 2 + 2 + 4;
+ fix_new (fragP, old_fr_fix + 6, fragP->fr_symbol,
+ fragP->fr_offset, FX_PCREL32, NULL);
+ break;
+
+ case STATE_ALWAYS_BRANCH:
+ *fragP->fr_opcode = TAHOE_JMP;
+ *p++ = TAHOE_PC_REL_LONG;
+ fragP->fr_fix += 1 + 4;
+ fix_new (fragP, old_fr_fix + 1, fragP->fr_symbol,
+ fragP->fr_offset, FX_PCREL32, NULL);
+ break;
+
+ default:
+ abort ();
+ }
frag_wane (fragP);
- }
- break;
- case ENCODE_RELAX (STATE_BIG_REV_BRANCH, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
- {
- fragP->fr_subtype =
- ENCODE_RELAX (STATE_BIG_REV_BRANCH, STATE_WORD);
- }
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- *fragP->fr_opcode ^= 0x10; /* Reverse sense of branch. */
- *p++ = 0;
- *p++ = 6;
- *p++ = TAHOE_JMP;
- *p++ = TAHOE_PC_REL_LONG;
- fragP->fr_fix += 2 + 2 + 4;
- fix_new (fragP, old_fr_fix + 4, fragP->fr_symbol,
- fragP->fr_offset, FX_PCREL32, NULL);
- frag_wane (fragP);
+ /* Return the growth in the fixed part of the frag. */
+ return fragP->fr_fix - old_fr_fix;
}
- break;
- case ENCODE_RELAX (STATE_BIG_NON_REV_BRANCH, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
+ /* Relaxable cases. Set up the initial guess for the variable
+ part of the frag. */
+ switch (RELAX_STATE (fragP->fr_subtype))
{
+ case STATE_PC_RELATIVE:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_PC_RELATIVE, STATE_BYTE);
+ break;
+ case STATE_CONDITIONAL_BRANCH:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_BYTE);
+ break;
+ case STATE_BIG_REV_BRANCH:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_BIG_REV_BRANCH, STATE_WORD);
+ break;
+ case STATE_BIG_NON_REV_BRANCH:
fragP->fr_subtype = ENCODE_RELAX (STATE_BIG_NON_REV_BRANCH, STATE_WORD);
- }
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- *p++ = 2;
- *p++ = 0;
- *p++ = TAHOE_BRB;
- *p++ = 6;
- *p++ = TAHOE_JMP;
- *p++ = TAHOE_PC_REL_LONG;
- fragP->fr_fix += 2 + 2 + 2 + 4;
- fix_new (fragP, old_fr_fix + 6, fragP->fr_symbol,
- fragP->fr_offset, FX_PCREL32, NULL);
- frag_wane (fragP);
- }
- break;
-
- case ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
- {
+ break;
+ case STATE_ALWAYS_BRANCH:
fragP->fr_subtype = ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_BYTE);
+ break;
}
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- *fragP->fr_opcode = TAHOE_JMP;
- *p++ = TAHOE_PC_REL_LONG;
- fragP->fr_fix += 1 + 4;
- fix_new (fragP, old_fr_fix + 1, fragP->fr_symbol,
- fragP->fr_offset, FX_PCREL32, NULL);
- frag_wane (fragP);
- }
- break;
-
- default:
- break;
}
- return (fragP->fr_var + fragP->fr_fix - old_fr_fix);
-} /* md_estimate_size_before_relax() */
+
+ if (fragP->fr_subtype >= sizeof (md_relax_table) / sizeof (md_relax_table[0]))
+ abort ();
+
+ /* Return the size of the variable part of the frag. */
+ return md_relax_table[fragP->fr_subtype].rlx_length;
+}
\f
-/*
- * md_convert_frag();
- *
- * Called after relax() is finished.
- * In: Address of frag.
- * fr_type == rs_machine_dependent.
- * fr_subtype is what the address relaxed to.
- *
- * Out: Any fixSs and constants are set up.
- * Caller will turn frag into a ".space 0".
- */
+/* Called after relax() is finished.
+ In: Address of frag.
+ fr_type == rs_machine_dependent.
+ fr_subtype is what the address relaxed to.
+
+ Out: Any fixSs and constants are set up.
+ Caller will turn frag into a ".space 0". */
+
void
-md_convert_frag (headers, seg, fragP)
- object_headers *headers;
- segT seg;
- register fragS *fragP;
+md_convert_frag (object_headers *headers, segT seg, fragS *fragP)
{
- register char *addressP; /* -> _var to change. */
- register char *opcodeP; /* -> opcode char(s) to change. */
- register short int length_code; /* 2=long 1=word 0=byte */
- register short int extension = 0; /* Size of relaxed address.
- Added to fr_fix: incl. ALL var chars. */
- register symbolS *symbolP;
- register long int where;
- register long int address_of_var;
- /* Where, in file space, is _var of *fragP? */
- register long int target_address;
- /* Where, in file space, does addr point? */
+ char *addressP; /* -> _var to change. */
+ char *opcodeP; /* -> opcode char(s) to change. */
+ short int extension = 0; /* Size of relaxed address.
+ Added to fr_fix: incl. ALL var chars. */
+ symbolS *symbolP;
+ long int where;
+ long int address_of_var;
+ /* Where, in file space, is _var of *fragP? */
+ long int target_address;
+ /* Where, in file space, does addr point? */
know (fragP->fr_type == rs_machine_dependent);
- length_code = RELAX_LENGTH (fragP->fr_subtype);
- know (length_code >= 0 && length_code < 3);
where = fragP->fr_fix;
addressP = fragP->fr_literal + where;
opcodeP = fragP->fr_opcode;
know (symbolP);
target_address = S_GET_VALUE (symbolP) + fragP->fr_offset;
address_of_var = fragP->fr_address + where;
+
switch (fragP->fr_subtype)
{
case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_BYTE):
/* *addressP holds the registers number, plus 0x10, if it's deferred
- mode. To set up the right mode, just OR the size of this displacement */
- /* Byte displacement. */
+ mode. To set up the right mode, just OR the size of this displacement. */
+ /* Byte displacement. */
*addressP++ |= TAHOE_PC_OR_BYTE;
*addressP = target_address - (address_of_var + 2);
extension = 2;
break;
case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_WORD):
- /* Word displacement. */
+ /* Word displacement. */
*addressP++ |= TAHOE_PC_OR_WORD;
md_number_to_chars (addressP, target_address - (address_of_var + 3), 2);
extension = 3;
break;
case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_LONG):
- /* Long word displacement. */
+ /* Long word displacement. */
*addressP++ |= TAHOE_PC_OR_LONG;
md_number_to_chars (addressP, target_address - (address_of_var + 5), 4);
extension = 5;
break;
case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_WORD):
- *opcodeP ^= 0x10; /* Reverse sense of test. */
- *addressP++ = 3; /* Jump over word branch */
+ *opcodeP ^= 0x10; /* Reverse sense of test. */
+ *addressP++ = 3; /* Jump over word branch. */
*addressP++ = TAHOE_BRW;
md_number_to_chars (addressP, target_address - (address_of_var + 4), 2);
extension = 4;
break;
case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_LONG):
- *opcodeP ^= 0x10; /* Reverse sense of test. */
+ *opcodeP ^= 0x10; /* Reverse sense of test. */
*addressP++ = 6;
*addressP++ = TAHOE_JMP;
*addressP++ = TAHOE_PC_REL_LONG;
break;
}
fragP->fr_fix += extension;
-} /* md_convert_frag */
+}
\f
-/* This is the stuff for md_assemble. */
+/* This is the stuff for md_assemble. */
#define FP_REG 13
#define SP_REG 14
#define PC_REG 15
#define BIGGESTREG PC_REG
-/*
- * Parse the string pointed to by START
- * If it represents a valid register, point START to the character after
- * the last valid register char, and return the register number (0-15).
- * If invalid, leave START alone, return -1.
- * The format has to be exact. I don't do things like eat leading zeros
- * or the like.
- * Note: This doesn't check for the next character in the string making
- * this invalid. Ex: R123 would return 12, it's the callers job to check
- * what start is point to apon return.
- *
- * Valid registers are R1-R15, %1-%15, FP (13), SP (14), PC (15)
- * Case doesn't matter.
- */
+/* Parse the string pointed to by START
+ If it represents a valid register, point START to the character after
+ the last valid register char, and return the register number (0-15).
+ If invalid, leave START alone, return -1.
+ The format has to be exact. I don't do things like eat leading zeros
+ or the like.
+ Note: This doesn't check for the next character in the string making
+ this invalid. Ex: R123 would return 12, it's the callers job to check
+ what start is point to apon return.
+
+ Valid registers are R1-R15, %1-%15, FP (13), SP (14), PC (15)
+ Case doesn't matter. */
+
int
-tahoe_reg_parse (start)
- char **start; /* A pointer to the string to parse. */
+tahoe_reg_parse (char **start) /* A pointer to the string to parse. */
{
- register char *regpoint = *start;
- register int regnum = -1;
+ char *regpoint = *start;
+ int regnum = -1;
switch (*regpoint++)
{
case '%': /* Registers can start with a %,
- R or r, and then a number. */
+ R or r, and then a number. */
case 'R':
case 'r':
- if (isdigit (*regpoint))
+ if (ISDIGIT (*regpoint))
{
- /* Got the first digit. */
+ /* Got the first digit. */
regnum = *regpoint++ - '0';
- if ((regnum == 1) && isdigit (*regpoint))
+ if ((regnum == 1) && ISDIGIT (*regpoint))
{
- /* Its a two digit number. */
+ /* Its a two digit number. */
regnum = 10 + (*regpoint++ - '0');
if (regnum > BIGGESTREG)
- { /* Number too big? */
- regnum = -1;
- }
+ regnum = -1;
}
}
break;
- case 'F': /* Is it the FP */
+ case 'F': /* Is it the FP. */
case 'f':
switch (*regpoint++)
{
regnum = FP_REG;
}
break;
- case 's': /* How about the SP */
+ case 's': /* How about the SP. */
case 'S':
switch (*regpoint++)
{
regnum = SP_REG;
}
break;
- case 'p': /* OR the PC even */
+ case 'p': /* Or the PC even. */
case 'P':
switch (*regpoint++)
{
}
if (regnum != -1)
- { /* No error, so move string pointer */
- *start = regpoint;
- }
- return regnum; /* Return results */
-} /* tahoe_reg_parse */
+ /* No error, so move string pointer. */
+ *start = regpoint;
+
+ return regnum;
+}
\f
-/*
- * This chops up an operand and figures out its modes and stuff.
- * It's a little touchy about extra characters.
- * Optex to start with one extra character so it can be overwritten for
- * the backward part of the parsing.
- * You can't put a bunch of extra characters in side to
- * make the command look cute. ie: * foo ( r1 ) [ r0 ]
- * If you like doing a lot of typing, try COBOL!
- * Actually, this parser is a little weak all around. It's designed to be
- * used with compliers, so I emphisise correct decoding of valid code quickly
- * rather that catching every possable error.
- * Note: This uses the expression function, so save input_line_pointer before
- * calling.
- *
- * Sperry defines the semantics of address modes (and values)
- * by a two-letter code, explained here.
- *
- * letter 1: access type
- *
- * a address calculation - no data access, registers forbidden
- * b branch displacement
- * m read - let go of bus - write back "modify"
- * r read
- * w write
- * v bit field address: like 'a' but registers are OK
- *
- * letter 2: data type (i.e. width, alignment)
- *
- * b byte
- * w word
- * l longword
- * q quadword (Even regs < 14 allowed) (if 12, you get a warning)
- * - unconditional synthetic jbr operand
- * ? simple synthetic reversable branch operand
- * ! complex synthetic reversable branch operand
- * : complex synthetic non-reversable branch operand
- *
- * The '-?!:' letter 2's are not for external consumption. They are used
- * by GAS for psuedo ops relaxing code.
- *
- * After parsing topP has:
- *
- * top_ndx: -1, or the index register. eg 7=[R7]
- * top_reg: -1, or register number. eg 7 = R7 or (R7)
- * top_mode: The addressing mode byte. This byte, defines which of
- * the 11 modes opcode is.
- * top_access: Access type wanted for this opperand 'b'branch ' '
- * no-instruction 'amrvw'
- * top_width: Operand width expected, one of "bwlq?-:!"
- * exp_of_operand: The expression as parsed by expression()
- * top_dispsize: Number of bytes in the displacement if we can figure it
- * out and it's relavent.
- *
- * Need syntax checks built.
- */
+/* This chops up an operand and figures out its modes and stuff.
+ It's a little touchy about extra characters.
+ Optex to start with one extra character so it can be overwritten for
+ the backward part of the parsing.
+ You can't put a bunch of extra characters in side to
+ make the command look cute. ie: * foo ( r1 ) [ r0 ]
+ If you like doing a lot of typing, try COBOL!
+ Actually, this parser is a little weak all around. It's designed to be
+ used with compliers, so I emphasize correct decoding of valid code quickly
+ rather that catching every possible error.
+ Note: This uses the expression function, so save input_line_pointer before
+ calling.
+
+ Sperry defines the semantics of address modes (and values)
+ by a two-letter code, explained here.
+
+ letter 1: access type
+
+ a address calculation - no data access, registers forbidden
+ b branch displacement
+ m read - let go of bus - write back "modify"
+ r read
+ w write
+ v bit field address: like 'a' but registers are OK
+
+ letter 2: data type (i.e. width, alignment)
+
+ b byte
+ w word
+ l longword
+ q quadword (Even regs < 14 allowed) (if 12, you get a warning)
+ - unconditional synthetic jbr operand
+ ? simple synthetic reversible branch operand
+ ! complex synthetic reversible branch operand
+ : complex synthetic non-reversible branch operand
+
+ The '-?!:' letter 2's are not for external consumption. They are used
+ by GAS for psuedo ops relaxing code.
+
+ After parsing topP has:
+
+ top_ndx: -1, or the index register. eg 7=[R7]
+ top_reg: -1, or register number. eg 7 = R7 or (R7)
+ top_mode: The addressing mode byte. This byte, defines which of
+ the 11 modes opcode is.
+ top_access: Access type wanted for this operand 'b'branch ' '
+ no-instruction 'amrvw'
+ top_width: Operand width expected, one of "bwlq?-:!"
+ exp_of_operand: The expression as parsed by expression()
+ top_dispsize: Number of bytes in the displacement if we can figure it
+ out and it's relevant.
+
+ Need syntax checks built. */
void
-tip_op (optex, topP)
- char *optex; /* The users text input, with one leading character */
- struct top *topP; /* The tahoe instruction with some fields already set:
- in: access, width
- out: ndx, reg, mode, error, dispsize */
-
+tip_op (char *optex, /* The users text input, with one leading character. */
+ struct top *topP) /* The tahoe instruction with some fields already set:
+ in: access, width
+ out: ndx, reg, mode, error, dispsize. */
{
- int mode = 0; /* This operand's mode. */
- char segfault = *optex; /* To keep the back parsing from freaking. */
- char *point = optex + 1; /* Parsing from front to back. */
- char *end; /* Parsing from back to front. */
- int reg = -1; /* major register, -1 means absent */
- int imreg = -1; /* Major register in immediate mode */
- int ndx = -1; /* index register number, -1 means absent */
+ int mode = 0; /* This operand's mode. */
+ char segfault = *optex; /* To keep the back parsing from freaking. */
+ char *point = optex + 1; /* Parsing from front to back. */
+ char *end; /* Parsing from back to front. */
+ int reg = -1; /* major register, -1 means absent. */
+ int imreg = -1; /* Major register in immediate mode. */
+ int ndx = -1; /* index register number, -1 means absent. */
char dec_inc = ' '; /* Is the SP auto-incremented '+' or
- auto-decremented '-' or neither ' '. */
- int immediate = 0; /* 1 if '$' immediate mode */
- int call_width = 0; /* If the caller casts the displacement */
- int abs_width = 0; /* The width of the absolute displacment */
- int com_width = 0; /* Displacement width required by branch */
- int deferred = 0; /* 1 if '*' deferral is used */
- byte disp_size = 0; /* How big is this operand. 0 == don't know */
- char *op_bad = ""; /* Bad operand error */
-
- char *tp, *temp, c; /* Temporary holders */
-
- char access = topP->top_access; /* Save on a deref. */
+ auto-decremented '-' or neither ' '. */
+ int immediate = 0; /* 1 if '$' immediate mode. */
+ int call_width = 0; /* If the caller casts the displacement. */
+ int abs_width = 0; /* The width of the absolute displacement. */
+ int com_width = 0; /* Displacement width required by branch. */
+ int deferred = 0; /* 1 if '*' deferral is used. */
+ byte disp_size = 0; /* How big is this operand. 0 == don't know. */
+ char *op_bad = ""; /* Bad operand error. */
+ char *tp, *temp, c; /* Temporary holders. */
+ char access = topP->top_access;/* Save on a deref. */
char width = topP->top_width;
-
int really_none = 0; /* Empty expressions evaluate to 0
- but I need to know if it's there or not */
- expressionS *expP; /* -> expression values for this operand */
+ but I need to know if it's there or not. */
+ expressionS *expP; /* -> expression values for this operand. */
- /* Does this command restrict the displacement size. */
+ /* Does this command restrict the displacement size. */
if (access == 'b')
com_width = (width == 'b' ? 1 :
(width == 'w' ? 2 :
(width == 'l' ? 4 : 0)));
*optex = '\0'; /* This is kind of a back stop for all
- the searches to fail on if needed.*/
+ the searches to fail on if needed. */
if (*point == '*')
- { /* A dereference? */
+ {
+ /* A dereference? */
deferred = 1;
point++;
}
- /* Force words into a certain mode */
- /* Bitch, Bitch, Bitch! */
- /*
- * Using the ^ operator is ambigous. If I have an absolute label
- * called 'w' set to, say 2, and I have the expression 'w^1', do I get
- * 1, forced to be in word displacement mode, or do I get the value of
- * 'w' or'ed with 1 (3 in this case).
- * The default is 'w' as an offset, so that's what I use.
- * Stick with `, it does the same, and isn't ambig.
- */
+ /* Force words into a certain mode. */
+ /* Using the ^ operator is ambiguous. If I have an absolute label
+ called 'w' set to, say 2, and I have the expression 'w^1', do I get
+ 1, forced to be in word displacement mode, or do I get the value of
+ 'w' or'ed with 1 (3 in this case).
+ The default is 'w' as an offset, so that's what I use.
+ Stick with `, it does the same, and isn't ambig. */
if (*point != '\0' && ((point[1] == '^') || (point[1] == '`')))
switch (*point)
as_warn (_("Casting a branch displacement is bad form, and is ignored."));
else
{
- c = (isupper (*point) ? tolower (*point) : *point);
+ c = TOLOWER (*point);
call_width = ((c == 'b') ? 1 :
((c == 'w') ? 2 : 4));
}
break;
}
- /* Setting immediate mode */
+ /* Setting immediate mode. */
if (*point == '$')
{
immediate = 1;
point++;
}
- /*
- * I've pulled off all the easy stuff off the front, move to the end and
- * yank.
- */
+ /* I've pulled off all the easy stuff off the front, move to the end and
+ yank. */
- for (end = point; *end != '\0'; end++) /* Move to the end. */
+ for (end = point; *end != '\0'; end++) /* Move to the end. */
;
- if (end != point) /* Null string? */
+ if (end != point) /* Null string? */
end--;
if (end > point && *end == ' ' && end[-1] != '\'')
- end--; /* Hop white space */
+ end--; /* Hop white space. */
- /* Is this an index reg. */
+ /* Is this an index reg. */
if ((*end == ']') && (end[-1] != '\''))
{
temp = end;
- /* Find opening brace. */
+ /* Find opening brace. */
for (--end; (*end != '[' && end != point); end--)
;
- /* If I found the opening brace, get the index register number. */
+ /* If I found the opening brace, get the index register number. */
if (*end == '[')
{
- tp = end + 1; /* tp should point to the start of a reg. */
+ tp = end + 1; /* tp should point to the start of a reg. */
ndx = tahoe_reg_parse (&tp);
if (tp != temp)
- { /* Reg. parse error. */
- ndx = -1;
- }
+ /* Reg. parse error. */
+ ndx = -1;
else
- {
- end--; /* Found it, move past brace. */
- }
+ /* Found it, move past brace. */
+ end--;
+
if (ndx == -1)
{
op_bad = _("Couldn't parse the [index] in this operand.");
- end = point; /* Force all the rest of the tests to fail. */
+ end = point; /* Force all the rest of the tests to fail. */
}
}
else
{
op_bad = _("Couldn't find the opening '[' for the index of this operand.");
- end = point; /* Force all the rest of the tests to fail. */
+ end = point; /* Force all the rest of the tests to fail. */
}
}
end--;
}
- /* register in parens? */
+ /* Register in parens? */
if ((*end == ')') && (end[-1] != '\''))
{
temp = end;
- /* Find opening paren. */
+ /* Find opening paren. */
for (--end; (*end != '(' && end != point); end--)
;
- /* If I found the opening paren, get the register number. */
+ /* If I found the opening paren, get the register number. */
if (*end == '(')
{
tp = end + 1;
reg = tahoe_reg_parse (&tp);
if (tp != temp)
{
- /* Not a register, but could be part of the expression. */
+ /* Not a register, but could be part of the expression. */
reg = -1;
- end = temp; /* Rest the pointer back */
+ /* Rest the pointer back. */
+ end = temp;
}
else
- {
- end--; /* Found the reg. move before opening paren. */
- }
+ /* Found the reg. move before opening paren. */
+ end--;
}
else
{
op_bad = _("Couldn't find the opening '(' for the deref of this operand.");
- end = point; /* Force all the rest of the tests to fail. */
+ /* Force all the rest of the tests to fail. */
+ end = point;
}
}
- /* Pre decrement? */
+ /* Pre decrement? */
if (*end == '-')
{
if (dec_inc != ' ')
else
{
dec_inc = '-';
- /* was: *end--; */
end--;
}
}
- /*
- * Everything between point and end is the 'expression', unless it's
- * a register name.
- */
-
+ /* Everything between point and end is the 'expression', unless it's
+ a register name. */
c = end[1];
end[1] = '\0';
tp = point;
- imreg = tahoe_reg_parse (&point); /* Get the immediate register
- if it is there.*/
+ /* Get the immediate register if it is there. */
+ imreg = tahoe_reg_parse (&point);
if (*point != '\0')
{
- /* If there is junk after point, then the it's not immediate reg. */
+ /* If there is junk after point, then the it's not immediate reg. */
point = tp;
imreg = -1;
}
if (imreg != -1 && reg != -1)
op_bad = _("I parsed 2 registers in this operand.");
- /*
- * Evaluate whats left of the expression to see if it's valid.
- * Note again: This assumes that the calling expression has saved
- * input_line_pointer. (Nag, nag, nag!)
- */
-
+ /* Evaluate whats left of the expression to see if it's valid.
+ Note again: This assumes that the calling expression has saved
+ input_line_pointer. (Nag, nag, nag!). */
if (*op_bad == '\0')
{
- /* statement has no syntax goofs yet: lets sniff the expression */
+ /* Statement has no syntax goofs yet: let's sniff the expression. */
input_line_pointer = point;
expP = &(topP->exp_of_operand);
topP->seg_of_operand = expression (expP);
{
case O_absent:
/* No expression. For BSD4.2 compatibility, missing expression is
- absolute 0 */
+ absolute 0. */
expP->X_op = O_constant;
expP->X_add_number = 0;
really_none = 1;
case O_constant:
- /* for SEG_ABSOLUTE, we shouldnt need to set X_op_symbol,
- X_add_symbol to any particular value. */
+ /* For SEG_ABSOLUTE, we shouldn't need to set X_op_symbol,
+ X_add_symbol to any particular value. */
/* But, we will program defensively. Since this situation occurs
- rarely so it costs us little to do so. */
+ rarely so it costs us little to do so. */
expP->X_add_symbol = NULL;
expP->X_op_symbol = NULL;
- /* How many bytes are needed to express this abs value? */
+ /* How many bytes are needed to express this abs value? */
abs_width =
- ((((expP->X_add_number & 0xFFFFFF80) == 0) ||
- ((expP->X_add_number & 0xFFFFFF80) == 0xFFFFFF80)) ? 1 :
- (((expP->X_add_number & 0xFFFF8000) == 0) ||
- ((expP->X_add_number & 0xFFFF8000) == 0xFFFF8000)) ? 2 : 4);
+ ((((expP->X_add_number & 0xFFFFFF80) == 0)
+ || ((expP->X_add_number & 0xFFFFFF80) == 0xFFFFFF80)) ? 1 :
+ (((expP->X_add_number & 0xFFFF8000) == 0)
+ || ((expP->X_add_number & 0xFFFF8000) == 0xFFFF8000)) ? 2 : 4);
case O_symbol:
break;
default:
- /*
- * Major bug. We can't handle the case of a operator
- * expression in a synthetic opcode variable-length
- * instruction. We don't have a frag type that is smart
- * enough to relax a operator, and so we just force all
- * operators to behave like SEG_PASS1s. Clearly, if there is
- * a demand we can invent a new or modified frag type and
- * then coding up a frag for this case will be easy.
- */
+ /* Major bug. We can't handle the case of an operator
+ expression in a synthetic opcode variable-length
+ instruction. We don't have a frag type that is smart
+ enough to relax an operator, and so we just force all
+ operators to behave like SEG_PASS1s. Clearly, if there is
+ a demand we can invent a new or modified frag type and
+ then coding up a frag for this case will be easy. */
need_pass_2 = 1;
op_bad = _("Can't relocate expression error.");
break;
case O_big:
/* This is an error. Tahoe doesn't allow any expressions
bigger that a 32 bit long word. Any bigger has to be referenced
- by address. */
+ by address. */
op_bad = _("Expression is too large for a 32 bits.");
break;
}
+
if (*input_line_pointer != '\0')
- {
- op_bad = _("Junk at end of expression.");
- }
+ op_bad = _("Junk at end of expression.");
}
end[1] = c;
- /* I'm done, so restore optex */
+ /* I'm done, so restore optex. */
*optex = segfault;
-
- /*
- * At this point in the game, we (in theory) have all the components of
- * the operand at least parsed. Now it's time to check for syntax/semantic
- * errors, and build the mode.
- * This is what I have:
- * deferred = 1 if '*'
- * call_width = 0,1,2,4
- * abs_width = 0,1,2,4
- * com_width = 0,1,2,4
- * immediate = 1 if '$'
- * ndx = -1 or reg num
- * dec_inc = '-' or '+' or ' '
- * reg = -1 or reg num
- * imreg = -1 or reg num
- * topP->exp_of_operand
- * really_none
- */
- /* Is there a displacement size? */
+ /* At this point in the game, we (in theory) have all the components of
+ the operand at least parsed. Now it's time to check for syntax/semantic
+ errors, and build the mode.
+ This is what I have:
+ deferred = 1 if '*'
+ call_width = 0,1,2,4
+ abs_width = 0,1,2,4
+ com_width = 0,1,2,4
+ immediate = 1 if '$'
+ ndx = -1 or reg num
+ dec_inc = '-' or '+' or ' '
+ reg = -1 or reg num
+ imreg = -1 or reg num
+ topP->exp_of_operand
+ really_none. */
+ /* Is there a displacement size? */
disp_size = (call_width ? call_width :
(com_width ? com_width :
abs_width ? abs_width : 0));
{
/* Rn */
mode = TAHOE_DIRECT_REG;
- if (deferred || immediate || (dec_inc != ' ') ||
- (reg != -1) || !really_none)
+ if (deferred
+ || immediate
+ || (dec_inc != ' ')
+ || (reg != -1)
+ || !really_none)
op_bad = _("Syntax error in direct register mode.");
else if (ndx != -1)
op_bad = _("You can't index a register in direct register mode.");
if (*op_bad == '\0')
{
- /* No errors, check for warnings */
+ /* No errors, check for warnings. */
if (width == 'q' && imreg == 12)
as_warn (_("Using reg 14 for quadwords can tromp the FP register."));
reg = imreg;
}
- /* We know: imm = -1 */
+ /* We know: imm = -1. */
}
else if (dec_inc == '-')
{
else if (width == 'q')
op_bad = _("Auto dec won't work with quadwords.");
- /* We know: imm = -1, dec_inc != '-' */
+ /* We know: imm = -1, dec_inc != '-'. */
}
else if (dec_inc == '+')
{
op_bad = _("You can't have an index in auto inc mode.");
}
- /* We know: imm = -1, dec_inc == ' ' */
+ /* We know: imm = -1, dec_inc == ' '. */
}
else if (reg != -1)
{
op_bad = _("Syntax error in register displaced mode.");
}
else if (really_none)
- {
- /* (Rn) */
- mode = TAHOE_REG_DEFERRED;
- /* if reg = SP then cant be indexed */
- }
+ /* (Rn) */
+ mode = TAHOE_REG_DEFERRED;
else
- {
- /* <disp>(Rn) */
- mode = TAHOE_REG_DISP;
- }
+ /* <disp>(Rn) */
+ mode = TAHOE_REG_DISP;
/* We know: imm = -1, dec_inc == ' ', Reg = -1 */
}
op_bad = _("You can't index a register in immediate mode.");
if (access == 'a')
op_bad = _("Immediate access can't be used as an address.");
- /* ponder the wisdom of a cast because it doesn't do any good. */
+ /* ponder the wisdom of a cast because it doesn't do any good. */
}
else if (deferred)
- {
- /* *<disp> */
- mode = TAHOE_DISP_REL_DEFERRED;
- }
+ /* *<disp> */
+ mode = TAHOE_DISP_REL_DEFERRED;
else
- {
- /* <disp> */
- mode = TAHOE_DISPLACED_RELATIVE;
- }
+ /* <disp> */
+ mode = TAHOE_DISPLACED_RELATIVE;
}
}
- /*
- * At this point, all the errors we can do have be checked for.
- * We can build the 'top'. */
-
+ /* At this point, all the errors we can do have be checked for.
+ We can build the 'top'. */
topP->top_ndx = ndx;
topP->top_reg = reg;
topP->top_mode = mode;
topP->top_error = op_bad;
topP->top_dispsize = disp_size;
-} /* tip_op */
+}
\f
-/*
- * t i p ( )
- *
- * This converts a string into a tahoe instruction.
- * The string must be a bare single instruction in tahoe (with BSD4 frobs)
- * format.
- * It provides at most one fatal error message (which stops the scan)
- * some warning messages as it finds them.
- * The tahoe instruction is returned in exploded form.
- *
- * The exploded instruction is returned to a struct tit of your choice.
- * #include "tahoe-inst.h" to know what a struct tit is.
- *
- */
+/* This converts a string into a tahoe instruction.
+ The string must be a bare single instruction in tahoe (with BSD4 frobs)
+ format.
+ It provides at most one fatal error message (which stops the scan)
+ some warning messages as it finds them.
+ The tahoe instruction is returned in exploded form.
+
+ The exploded instruction is returned to a struct tit of your choice.
+ #include "tahoe-inst.h" to know what a struct tit is. */
static void
-tip (titP, instring)
- struct tit *titP; /* We build an exploded instruction here. */
- char *instring; /* Text of a vax instruction: we modify. */
+tip (struct tit *titP, /* We build an exploded instruction here. */
+ char *instring) /* Text of a vax instruction: we modify. */
{
- register struct tot_wot *twP = NULL; /* How to bit-encode this opcode. */
- register char *p; /* 1/skip whitespace.2/scan vot_how */
- register char *q; /* */
- register unsigned char count; /* counts number of operands seen */
- register struct top *operandp;/* scan operands in struct tit */
- register char *alloperr = ""; /* error over all operands */
- register char c; /* Remember char, (we clobber it
- with '\0' temporarily). */
+ struct tot_wot *twP = NULL; /* How to bit-encode this opcode. */
+ char *p; /* 1/skip whitespace.2/scan vot_how. */
+ char *q;
+ unsigned char count; /* Counts number of operands seen. */
+ struct top *operandp; /* Scan operands in struct tit. */
+ char *alloperr = ""; /* Error over all operands. */
+ char c; /* Remember char, (we clobber it with '\0' temporarily). */
char *save_input_line_pointer;
if (*instring == ' ')
- ++instring; /* Skip leading whitespace. */
+ ++instring; /* Skip leading whitespace. */
for (p = instring; *p && *p != ' '; p++)
- ; /* MUST end in end-of-string or
- exactly 1 space. */
- /* Scanned up to end of operation-code. */
- /* Operation-code is ended with whitespace. */
+ ;
+
+ /* Scanned up to end of operation-code. */
+ /* Operation-code is ended with whitespace. */
if (p == instring)
{
titP->tit_error = _("No operator");
{
c = *p;
*p = '\0';
- /*
- * Here with instring pointing to what better be an op-name, and p
- * pointing to character just past that.
- * We trust instring points to an op-name, with no whitespace.
- */
+
+ /* Here with instring pointing to what better be an op-name, and p
+ pointing to character just past that.
+ We trust instring points to an op-name, with no whitespace. */
twP = (struct tot_wot *) hash_find (op_hash, instring);
- *p = c; /* Restore char after op-code. */
+ /* Restore char after op-code. */
+ *p = c;
if (twP == 0)
{
titP->tit_error = _("Unknown operator");
}
else
{
- /*
- * We found a match! So lets pick up as many operands as the
- * instruction wants, and even gripe if there are too many.
- * We expect comma to seperate each operand.
- * We let instring track the text, while p tracks a part of the
- * struct tot.
- */
-
- count = 0; /* no operands seen yet */
- instring = p + (*p != '\0'); /* point past the operation code */
+ /* We found a match! So let's pick up as many operands as the
+ instruction wants, and even gripe if there are too many.
+ We expect comma to separate each operand.
+ We let instring track the text, while p tracks a part of the
+ struct tot. */
+
+ /* No operands seen yet. */
+ count = 0;
+ /* Point past the operation code. */
+ instring = p + (*p != '\0');
/* tip_op() screws with the input_line_pointer, so save it before
- I jump in */
+ I jump in. */
save_input_line_pointer = input_line_pointer;
+
for (p = twP->args, operandp = titP->tit_operand;
!*alloperr && *p;
operandp++, p += 2)
{
- /*
- * Here to parse one operand. Leave instring pointing just
- * past any one ',' that marks the end of this operand.
- */
+ /* Here to parse one operand. Leave instring pointing just
+ past any one ',' that marks the end of this operand. */
if (!p[1])
as_fatal (_("Compiler bug: ODD number of bytes in arg structure %s."),
twP->args);
else if (*instring)
{
for (q = instring; (*q != ',' && *q != '\0'); q++)
- {
- if (*q == '\'' && q[1] != '\0') /* Jump quoted characters */
- q++;
- }
+ /* Jump quoted characters. */
+ if (*q == '\'' && q[1] != '\0')
+ q++;
+
c = *q;
- /*
- * Q points to ',' or '\0' that ends argument. C is that
- * character.
- */
+ /* Q points to ',' or '\0' that ends argument. C is that
+ character. */
*q = '\0';
operandp->top_access = p[0];
operandp->top_width = p[1];
tip_op (instring - 1, operandp);
- *q = c; /* Restore input text. */
+ /* Restore input text. */
+ *q = c;
+
if (*(operandp->top_error))
- {
- alloperr = operandp->top_error;
- }
- instring = q + (c ? 1 : 0); /* next operand (if any) */
- count++; /* won another argument, may have an operr */
+ alloperr = operandp->top_error;
+
+ /* Next operand (if any). */
+ instring = q + (c ? 1 : 0);
+ /* Won another argument, may have an operr. */
+ count++;
}
else
alloperr = _("Not enough operands");
}
- /* Restore the pointer. */
+ /* Restore the pointer. */
input_line_pointer = save_input_line_pointer;
if (!*alloperr)
{
+ /* Skip whitespace. */
if (*instring == ' ')
- instring++; /* Skip whitespace. */
+ instring ++;
+
if (*instring)
alloperr = _("Too many operands");
}
+
titP->tit_error = alloperr;
}
}
- titP->tit_opcode = twP->code; /* The op-code. */
+ titP->tit_opcode = twP->code;
titP->tit_operands = count;
-} /* tip */
+}
\f
-/* md_assemble() emit frags for 1 instruction */
void
-md_assemble (instruction_string)
- char *instruction_string; /* A string: assemble 1 instruction. */
+md_assemble (char *instruction_string)
{
char *p;
- register struct top *operandP;/* An operand. Scans all operands. */
- /* char c_save; fixme: remove this line *//* What used to live after an expression. */
- /* struct frag *fragP; fixme: remove this line *//* Fragment of code we just made. */
- /* register struct top *end_operandP; fixme: remove this line *//* -> slot just after last operand
- Limit of the for (each operand). */
- register expressionS *expP; /* -> expression values for this operand */
-
- /* These refer to an instruction operand expression. */
+ struct top *operandP; /* An operand. Scans all operands. */
+ expressionS *expP; /* -> expression values for this operand. */
+ /* These refer to an instruction operand expression. */
segT to_seg; /* Target segment of the address. */
-
- register valueT this_add_number;
- register symbolS *this_add_symbol; /* +ve (minuend) symbol. */
-
- /* tahoe_opcodeT opcode_as_number; fixme: remove this line *//* The opcode as a number. */
- char *opcodeP; /* Where it is in a frag. */
- /* char *opmodeP; fixme: remove this line *//* Where opcode type is, in a frag. */
-
- int dispsize; /* From top_dispsize: tahoe_operand_width
- (in bytes) */
- int is_undefined; /* 1 if operand expression's
- segment not known yet. */
- int pc_rel; /* Is this operand pc relative? */
-
- /* Decode the operand. */
+ valueT this_add_number;
+ symbolS *this_add_symbol; /* +ve (minuend) symbol. */
+ char *opcodeP; /* Where it is in a frag. */
+ int dispsize; /* From top_dispsize: tahoe_operand_width (in bytes). */
+ int is_undefined; /* 1 if operand expression's segment not known yet. */
+ int pc_rel; /* Is this operand pc relative? */
+
+ /* Decode the operand. */
tip (&t, instruction_string);
- /*
- * Check to see if this operand decode properly.
- * Notice that we haven't made any frags yet.
- * If it goofed, then this instruction will wedge in any pass,
- * and we can safely flush it, without causing interpass symbol phase
- * errors. That is, without changing label values in different passes.
- */
+ /* Check to see if this operand decode properly.
+ Notice that we haven't made any frags yet.
+ If it goofed, then this instruction will wedge in any pass,
+ and we can safely flush it, without causing interpass symbol phase
+ errors. That is, without changing label values in different passes. */
+
if (*t.tit_error)
- {
- as_warn (_("Ignoring statement due to \"%s\""), t.tit_error);
- }
+ as_warn (_("Ignoring statement due to \"%s\""), t.tit_error);
else
{
- /* We saw no errors in any operands - try to make frag(s) */
- /* Emit op-code. */
- /* Remember where it is, in case we want to modify the op-code later. */
+ /* We saw no errors in any operands - try to make frag(s). */
+ /* Emit op-code. */
+ /* Remember where it is, in case we want to modify the op-code later. */
opcodeP = frag_more (1);
*opcodeP = t.tit_opcode;
- /* Now do each operand. */
+ /* Now do each operand. */
for (operandP = t.tit_operand;
operandP < t.tit_operand + t.tit_operands;
operandP++)
if (operandP->top_ndx >= 0)
{
/* Indexed addressing byte
- Legality of indexed mode already checked: it is OK */
+ Legality of indexed mode already checked: it is OK. */
FRAG_APPEND_1_CHAR (0x40 + operandP->top_ndx);
} /* if(top_ndx>=0) */
- /* Here to make main operand frag(s). */
+ /* Here to make main operand frag(s). */
this_add_number = expP->X_add_number;
this_add_symbol = expP->X_add_symbol;
to_seg = operandP->seg_of_operand;
- know (to_seg == SEG_UNKNOWN || \
- to_seg == SEG_ABSOLUTE || \
- to_seg == SEG_DATA || \
- to_seg == SEG_TEXT || \
- to_seg == SEG_BSS);
+ know (to_seg == SEG_UNKNOWN \
+ || to_seg == SEG_ABSOLUTE \
+ || to_seg == SEG_DATA \
+ || to_seg == SEG_TEXT \
+ || to_seg == SEG_BSS);
is_undefined = (to_seg == SEG_UNKNOWN);
- /* Do we know how big this opperand is? */
+ /* Do we know how big this operand is? */
dispsize = operandP->top_dispsize;
pc_rel = 0;
- /* Deal with the branch possabilities. (Note, this doesn't include
- jumps.)*/
+ /* Deal with the branch possibilities. (Note, this doesn't include jumps.) */
if (operandP->top_access == 'b')
{
/* Branches must be expressions. A psuedo branch can also jump to
- an absolute address. */
+ an absolute address. */
if (to_seg == now_seg || is_undefined)
{
- /* If is_undefined, then it might BECOME now_seg by relax time. */
+ /* If is_undefined, then it might BECOME now_seg by relax time. */
if (dispsize)
{
/* I know how big the branch is supposed to be (it's a normal
- branch), so I set up the frag, and let GAS do the rest. */
+ branch), so I set up the frag, and let GAS do the rest. */
p = frag_more (dispsize);
fix_new (frag_now, p - frag_now->fr_literal,
this_add_symbol, this_add_number,
}
else
{
- /* (to_seg==now_seg || to_seg == SEG_UNKNOWN) && dispsize==0 */
/* If we don't know how big it is, then its a synthetic branch,
- so we set up a simple relax state. */
+ so we set up a simple relax state. */
switch (operandP->top_width)
{
case TAHOE_WIDTH_CONDITIONAL_JUMP:
/* Simple (conditional) jump. I may have to reverse the
- condition of opcodeP, and then jump to my destination.
- I set 1 byte aside for the branch off set, and could need 6
- more bytes for the pc_rel jump */
+ condition of opcodeP, and then jump to my destination.
+ I set 1 byte aside for the branch off set, and could need 6
+ more bytes for the pc_rel jump. */
frag_var (rs_machine_dependent, 7, 1,
ENCODE_RELAX (STATE_CONDITIONAL_BRANCH,
is_undefined ? STATE_UNDF : STATE_BYTE),
break;
case TAHOE_WIDTH_ALWAYS_JUMP:
/* Simple (unconditional) jump. I may have to convert this to
- a word branch, or an absolute jump. */
+ a word branch, or an absolute jump. */
frag_var (rs_machine_dependent, 5, 1,
ENCODE_RELAX (STATE_ALWAYS_BRANCH,
is_undefined ? STATE_UNDF : STATE_BYTE),
this_add_symbol, this_add_number, opcodeP);
break;
- /* The smallest size for the next 2 cases is word. */
+ /* The smallest size for the next 2 cases is word. */
case TAHOE_WIDTH_BIG_REV_JUMP:
frag_var (rs_machine_dependent, 8, 2,
ENCODE_RELAX (STATE_BIG_REV_BRANCH,
else
{
/* to_seg != now_seg && to_seg != seg_unknown (still in branch)
- In other words, I'm jumping out of my segment so extend the
- branches to jumps, and let GAS fix them. */
+ In other words, I'm jumping out of my segment so extend the
+ branches to jumps, and let GAS fix them. */
/* These are "branches" what will always be branches around a jump
- to the correct addresss in real life.
- If to_seg is SEG_ABSOLUTE, just encode the branch in,
- else let GAS fix the address. */
+ to the correct address in real life.
+ If to_seg is SEG_ABSOLUTE, just encode the branch in,
+ else let GAS fix the address. */
switch (operandP->top_width)
{
/* The theory:
- For SEG_ABSOLUTE, then mode is ABSOLUTE_ADDR, jump
- to that addresss (not pc_rel).
- For other segs, address is a long word PC rel jump. */
+ For SEG_ABSOLUTE, then mode is ABSOLUTE_ADDR, jump
+ to that address (not pc_rel).
+ For other segs, address is a long word PC rel jump. */
case TAHOE_WIDTH_CONDITIONAL_JUMP:
/* b<cond> */
/* To reverse the condition in a TAHOE branch,
- complement bit 4 */
+ complement bit 4 */
*opcodeP ^= 0x10;
p = frag_more (7);
*p++ = 6;
fix_new (frag_now, p - frag_now->fr_literal,
this_add_symbol, this_add_number,
(to_seg != SEG_ABSOLUTE) ? FX_PCREL32 : FX_32, NULL);
- /*
- * Now (eg) BLEQ 1f
- * JMP foo
- * 1:
- */
+
+ /* Now (eg) BLEQ 1f
+ JMP foo
+ 1: */
break;
+
case TAHOE_WIDTH_ALWAYS_JUMP:
- /* br, just turn it into a jump */
+ /* Br, just turn it into a jump. */
*opcodeP = TAHOE_JMP;
p = frag_more (5);
*p++ = (operandP->top_mode ==
fix_new (frag_now, p - frag_now->fr_literal,
this_add_symbol, this_add_number,
(to_seg != SEG_ABSOLUTE) ? FX_PCREL32 : FX_32, NULL);
- /* Now (eg) JMP foo */
+ /* Now (eg) JMP foo. */
break;
+
case TAHOE_WIDTH_BIG_REV_JUMP:
p = frag_more (8);
*opcodeP ^= 0x10;
fix_new (frag_now, p - frag_now->fr_literal,
this_add_symbol, this_add_number,
(to_seg != SEG_ABSOLUTE) ? FX_PCREL32 : FX_32, NULL);
- /*
- * Now (eg) ACBx 1f
- * JMP foo
- * 1:
- */
+ /* Now (eg) ACBx 1f
+ JMP foo
+ 1: */
break;
+
case TAHOE_WIDTH_BIG_NON_REV_JUMP:
p = frag_more (10);
*p++ = 0;
fix_new (frag_now, p - frag_now->fr_literal,
this_add_symbol, this_add_number,
(to_seg != SEG_ABSOLUTE) ? FX_PCREL32 : FX_32, NULL);
- /*
- * Now (eg) xOBxxx 1f
- * BRB 2f
- * 1: JMP @#foo
- * 2:
- */
+ /* Now (eg) xOBxxx 1f
+ BRB 2f
+ 1: JMP @#foo
+ 2: */
break;
case 'b':
case 'w':
}
else
{
- /* It ain't a branch operand. */
+ /* It ain't a branch operand. */
switch (operandP->top_mode)
{
/* Auto-foo access, only works for one reg (SP)
- so the only thing needed is the mode. */
+ so the only thing needed is the mode. */
case TAHOE_AUTO_DEC:
case TAHOE_AUTO_INC:
case TAHOE_AUTO_INC_DEFERRED:
break;
/* Numbered Register only access. Only thing needed is the
- mode + Register number */
+ mode + Register number. */
case TAHOE_DIRECT_REG:
case TAHOE_REG_DEFERRED:
FRAG_APPEND_1_CHAR (operandP->top_mode + operandP->top_reg);
break;
/* An absolute address. It's size is always 5 bytes.
- (mode_type + 4 byte address). */
+ (mode_type + 4 byte address). */
case TAHOE_ABSOLUTE_ADDR:
know ((this_add_symbol == NULL));
p = frag_more (5);
break;
/* Immediate data. If the size isn't known, then it's an address
- + and offset, which is 4 bytes big. */
+ + and offset, which is 4 bytes big. */
case TAHOE_IMMEDIATE:
if (this_add_symbol != NULL)
{
}
else
{
- /* It's a integer, and I know it's size. */
+ /* It's an integer, and I know it's size. */
if ((unsigned) this_add_number < 0x40)
- {
- /* Will it fit in a literal? */
- FRAG_APPEND_1_CHAR ((byte) this_add_number);
- }
+ /* Will it fit in a literal? */
+ FRAG_APPEND_1_CHAR ((byte) this_add_number);
else
{
p = frag_more (dispsize + 1);
break;
/* Distance from the PC. If the size isn't known, we have to relax
- into it. The difference between this and disp(sp) is that
- this offset is pc_rel, and disp(sp) isn't.
- Note the drop through code. */
+ into it. The difference between this and disp(sp) is that
+ this offset is pc_rel, and disp(sp) isn't.
+ Note the drop through code. */
case TAHOE_DISPLACED_RELATIVE:
case TAHOE_DISP_REL_DEFERRED:
pc_rel = 1;
/* Register, plus a displacement mode. Save the register number,
- and weather its deffered or not, and relax the size if it isn't
- known. */
+ and weather its deffered or not, and relax the size if it isn't
+ known. */
case TAHOE_REG_DISP:
case TAHOE_REG_DISP_DEFERRED:
- if (operandP->top_mode == TAHOE_DISP_REL_DEFERRED ||
- operandP->top_mode == TAHOE_REG_DISP_DEFERRED)
- operandP->top_reg += 0x10; /* deffered mode is always 0x10 higher
- than it's non-deffered sibling. */
+ if (operandP->top_mode == TAHOE_DISP_REL_DEFERRED
+ || operandP->top_mode == TAHOE_REG_DISP_DEFERRED)
+ /* Deffered mode is always 0x10 higher than it's non-deffered sibling. */
+ operandP->top_reg += 0x10;
/* Is this a value out of this segment?
- The first part of this conditional is a cludge to make gas
- produce the same output as 'as' when there is a lable, in
- the current segment, displaceing a register. It's strange,
- and no one in their right mind would do it, but it's easy
- to cludge. */
- if ((dispsize == 0 && !pc_rel) ||
- (to_seg != now_seg && !is_undefined && to_seg != SEG_ABSOLUTE))
+ The first part of this conditional is a cludge to make gas
+ produce the same output as 'as' when there is a lable, in
+ the current segment, displacing a register. It's strange,
+ and no one in their right mind would do it, but it's easy
+ to cludge. */
+ if ((dispsize == 0 && !pc_rel)
+ || (to_seg != now_seg && !is_undefined && to_seg != SEG_ABSOLUTE))
dispsize = 4;
if (dispsize == 0)
{
- /*
- * We have a SEG_UNKNOWN symbol, or the size isn't cast.
- * It might turn out to be in the same segment as
- * the instruction, permitting relaxation.
- */
+ /* We have a SEG_UNKNOWN symbol, or the size isn't cast.
+ It might turn out to be in the same segment as
+ the instruction, permitting relaxation. */
p = frag_var (rs_machine_dependent, 5, 2,
ENCODE_RELAX (STATE_PC_RELATIVE,
is_undefined ? STATE_UNDF : STATE_BYTE),
}
else
{
- /* Either this is an abs, or a cast. */
+ /* Either this is an abs, or a cast. */
p = frag_more (dispsize + 1);
switch (dispsize)
{
as_fatal (_("Barf, bad mode %x\n"), operandP->top_mode);
}
}
- } /* for(operandP) */
- } /* if(!need_pass_2 && !goofed) */
-} /* tahoe_assemble() */
-
+ }
+ }
+}
-/* We have no need to default values of symbols. */
+/* We have no need to default values of symbols. */
-/* ARGSUSED */
symbolS *
-md_undefined_symbol (name)
- char *name;
+md_undefined_symbol (char *name)
{
return 0;
-} /* md_undefined_symbol() */
+}
+
+/* Round up a section size to the appropriate boundary. */
-/* Round up a section size to the appropriate boundary. */
valueT
-md_section_align (segment, size)
- segT segment;
- valueT size;
+md_section_align (segT segment, valueT size)
{
- return ((size + 7) & ~7); /* Round all sects to multiple of 8 */
-} /* md_section_align() */
+ /* Round all sects to multiple of 8. */
+ return ((size + 7) & ~7);
+}
/* Exactly what point is a PC-relative offset relative TO?
On the sparc, they're relative to the address of the offset, plus
its size. This gets us to the following instruction.
(??? Is this right? FIXME-SOON) */
-long
-md_pcrel_from (fixP)
- fixS *fixP;
+
+long
+md_pcrel_from (fixS *fixP)
{
return (((fixP->fx_type == FX_8
|| fixP->fx_type == FX_PCREL8)
|| fixP->fx_type == FX_PCREL32)
? 4
: 0))) + fixP->fx_where + fixP->fx_frag->fr_address);
-} /* md_pcrel_from() */
+}
-int
-tc_is_pcrel (fixP)
- fixS *fixP;
+int
+tc_is_pcrel (fixS *fixP)
{
- /* should never be called */
+ /* Should never be called. */
know (0);
- return (0);
-} /* tc_is_pcrel() */
-
-/* end of tc-tahoe.c */
+ return 0;
+}