/* tc-xtensa.c -- Assemble Xtensa instructions.
- Copyright 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ Copyright (C) 2003-2022 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
MA 02110-1301, USA. */
-#include <limits.h>
#include "as.h"
+#include <limits.h>
#include "sb.h"
#include "safe-ctype.h"
#include "tc-xtensa.h"
#include "xtensa-relax.h"
#include "dwarf2dbg.h"
#include "xtensa-istack.h"
-#include "struc-symbol.h"
#include "xtensa-config.h"
+#include "elf/xtensa.h"
/* Provide default values for new configuration settings. */
-#ifndef XSHAL_ABI
-#define XSHAL_ABI 0
+#ifndef XTHAL_ABI_WINDOWED
+#define XTHAL_ABI_WINDOWED 0
+#endif
+
+#ifndef XTHAL_ABI_CALL0
+#define XTHAL_ABI_CALL0 1
+#endif
+
+#ifndef XTENSA_MARCH_EARLIEST
+#define XTENSA_MARCH_EARLIEST 0
#endif
#ifndef uint32
/* Flags to indicate whether the hardware supports the density and
absolute literals options. */
-bfd_boolean density_supported = XCHAL_HAVE_DENSITY;
-bfd_boolean absolute_literals_supported = XSHAL_USE_ABSOLUTE_LITERALS;
+bool density_supported;
+bool absolute_literals_supported;
-/* Maximum width we would pad an unreachable frag to get alignment. */
-#define UNREACHABLE_MAX_WIDTH 8
+static unsigned microarch_earliest;
static vliw_insn cur_vinsn;
unsigned xtensa_num_pipe_stages;
-unsigned xtensa_fetch_width = XCHAL_INST_FETCH_WIDTH;
+unsigned xtensa_fetch_width;
static enum debug_info_type xt_saved_debug_type = DEBUG_NONE;
/* Some functions are only valid in the front end. This variable
allows us to assert that we haven't crossed over into the
back end. */
-static bfd_boolean past_xtensa_end = FALSE;
+static bool past_xtensa_end = false;
/* Flags for properties of the last instruction in a segment. */
#define FLAG_IS_A0_WRITER 0x1
/* Required branch target alignment. */
#define XTENSA_PROP_BT_ALIGN_REQUIRE 0x3
-#define GET_XTENSA_PROP_BT_ALIGN(flag) \
- (((unsigned) ((flag) & (XTENSA_PROP_BT_ALIGN_MASK))) >> 9)
#define SET_XTENSA_PROP_BT_ALIGN(flag, align) \
(((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \
(((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK))
#define XTENSA_PROP_ALIGNMENT_MASK 0x0001f000
-#define GET_XTENSA_PROP_ALIGNMENT(flag) \
- (((unsigned) ((flag) & (XTENSA_PROP_ALIGNMENT_MASK))) >> 12)
#define SET_XTENSA_PROP_ALIGNMENT(flag, align) \
(((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \
(((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK))
#define O_hi16 O_md2 /* use high 16 bits of symbolic value */
#define O_lo16 O_md3 /* use low 16 bits of symbolic value */
#define O_pcrel O_md4 /* value is a PC-relative offset */
+#define O_tlsfunc O_md5 /* TLS_FUNC/TLSDESC_FN relocation */
+#define O_tlsarg O_md6 /* TLS_ARG/TLSDESC_ARG relocation */
+#define O_tlscall O_md7 /* TLS_CALL relocation */
+#define O_tpoff O_md8 /* TPOFF relocation */
+#define O_dtpoff O_md9 /* DTPOFF relocation */
struct suffix_reloc_map
{
- char *suffix;
+ const char *suffix;
int length;
bfd_reloc_code_real_type reloc;
- unsigned char operator;
+ operatorT operator;
};
#define SUFFIX_MAP(str, reloc, op) { str, sizeof (str) - 1, reloc, op }
SUFFIX_MAP ("h", BFD_RELOC_HI16, O_hi16),
SUFFIX_MAP ("plt", BFD_RELOC_XTENSA_PLT, O_pltrel),
SUFFIX_MAP ("pcrel", BFD_RELOC_32_PCREL, O_pcrel),
- { (char *) 0, 0, BFD_RELOC_UNUSED, 0 }
+ SUFFIX_MAP ("tlsfunc", BFD_RELOC_XTENSA_TLS_FUNC, O_tlsfunc),
+ SUFFIX_MAP ("tlsarg", BFD_RELOC_XTENSA_TLS_ARG, O_tlsarg),
+ SUFFIX_MAP ("tlscall", BFD_RELOC_XTENSA_TLS_CALL, O_tlscall),
+ SUFFIX_MAP ("tpoff", BFD_RELOC_XTENSA_TLS_TPOFF, O_tpoff),
+ SUFFIX_MAP ("dtpoff", BFD_RELOC_XTENSA_TLS_DTPOFF, O_dtpoff),
};
typedef struct
{
const char *name;
- bfd_boolean can_be_negated;
+ bool can_be_negated;
} directive_infoS;
const directive_infoS directive_info[] =
{
- { "none", FALSE },
- { "literal", FALSE },
- { "density", TRUE },
- { "transform", TRUE },
- { "freeregs", FALSE },
- { "longcalls", TRUE },
- { "literal_prefix", FALSE },
- { "schedule", TRUE },
- { "absolute-literals", TRUE }
+ { "none", false },
+ { "literal", false },
+ { "density", true },
+ { "transform", true },
+ { "freeregs", false },
+ { "longcalls", true },
+ { "literal_prefix", false },
+ { "schedule", true },
+ { "absolute-literals", true }
+};
+
+bool directive_state[] =
+{
+ false, /* none */
+ false, /* literal */
+ false, /* density */
+ true, /* transform */
+ false, /* freeregs */
+ false, /* longcalls */
+ false, /* literal_prefix */
+ false, /* schedule */
+ false /* absolute_literals */
+};
+
+/* A circular list of all potential and actual literal pool locations
+ in a segment. */
+struct litpool_frag
+{
+ struct litpool_frag *next;
+ struct litpool_frag *prev;
+ fragS *fragP;
+ addressT addr;
+ short priority; /* 1, 2, or 3 -- 1 is highest */
+ short original_priority;
+ int literal_count;
};
-bfd_boolean directive_state[] =
+/* Map a segment to its litpool_frag list. */
+struct litpool_seg
{
- FALSE, /* none */
- FALSE, /* literal */
-#if !XCHAL_HAVE_DENSITY
- FALSE, /* density */
-#else
- TRUE, /* density */
-#endif
- TRUE, /* transform */
- FALSE, /* freeregs */
- FALSE, /* longcalls */
- FALSE, /* literal_prefix */
- FALSE, /* schedule */
-#if XSHAL_USE_ABSOLUTE_LITERALS
- TRUE /* absolute_literals */
-#else
- FALSE /* absolute_literals */
-#endif
+ struct litpool_seg *next;
+ asection *seg;
+ struct litpool_frag frag_list;
+ int frag_count; /* since last litpool location */
};
+static struct litpool_seg litpool_seg_list;
+
+/* Limit maximal size of auto litpool by half of the j range. */
+#define MAX_AUTO_POOL_LITERALS 16384
+
+/* Limit maximal size of explicit literal pool by l32r range. */
+#define MAX_EXPLICIT_POOL_LITERALS 65536
+
+#define MAX_POOL_LITERALS \
+ (auto_litpools ? MAX_AUTO_POOL_LITERALS : MAX_EXPLICIT_POOL_LITERALS)
/* Directive functions. */
/* Various Other Internal Functions. */
-extern bfd_boolean xg_is_single_relaxable_insn (TInsn *, TInsn *, bfd_boolean);
-static bfd_boolean xg_build_to_insn (TInsn *, TInsn *, BuildInstr *);
+extern bool xg_is_single_relaxable_insn (TInsn *, TInsn *, bool);
+static bool xg_build_to_insn (TInsn *, TInsn *, BuildInstr *);
static void xtensa_mark_literal_pool_location (void);
static addressT get_expanded_loop_offset (xtensa_opcode);
static fragS *get_literal_pool_location (segT);
static void set_literal_pool_location (segT, fragS *);
static void xtensa_set_frag_assembly_state (fragS *);
static void finish_vinsn (vliw_insn *);
-static bfd_boolean emit_single_op (TInsn *);
+static bool emit_single_op (TInsn *);
static int total_frag_text_expansion (fragS *);
+static bool use_trampolines = true;
+static void xtensa_check_frag_count (void);
+static void xtensa_create_trampoline_frag (bool);
+static void xtensa_maybe_create_trampoline_frag (void);
+struct trampoline_frag;
+static int init_trampoline_frag (fragS *);
+static fixS *xg_append_jump (fragS *fragP, symbolS *sym, offsetT offset);
+static void xtensa_maybe_create_literal_pool_frag (bool, bool);
+static bool auto_litpools = false;
+static int auto_litpool_limit = 0;
+static bool xtensa_is_init_fini (segT seg);
/* Alignment Functions. */
static int get_text_align_power (unsigned);
-static int get_text_align_max_fill_size (int, bfd_boolean, bfd_boolean);
+static int get_text_align_max_fill_size (int, bool, bool);
static int branch_align_power (segT);
/* Helpers for xtensa_relax_frag(). */
/* Accessors for additional per-subsegment information. */
static unsigned get_last_insn_flags (segT, subsegT);
-static void set_last_insn_flags (segT, subsegT, unsigned, bfd_boolean);
+static void set_last_insn_flags (segT, subsegT, unsigned, bool);
static float get_subseg_total_freq (segT, subsegT);
static float get_subseg_target_freq (segT, subsegT);
static void set_subseg_freq (segT, subsegT, float, float);
static void xtensa_switch_to_non_abs_literal_fragment (emit_state *);
static void xtensa_switch_section_emit_state (emit_state *, segT, subsegT);
static void xtensa_restore_emit_state (emit_state *);
-static segT cache_literal_section (bfd_boolean);
-
-/* Import from elf32-xtensa.c in BFD library. */
-
-extern asection *xtensa_get_property_section (asection *, const char *);
+static segT cache_literal_section (bool);
/* op_placement_info functions. */
static void init_op_placement_info_table (void);
-extern bfd_boolean opcode_fits_format_slot (xtensa_opcode, xtensa_format, int);
+extern bool opcode_fits_format_slot (xtensa_opcode, xtensa_format, int);
static int xg_get_single_size (xtensa_opcode);
static xtensa_format xg_get_single_format (xtensa_opcode);
static int xg_get_single_slot (xtensa_opcode);
/* TInsn and IStack functions. */
-static bfd_boolean tinsn_has_symbolic_operands (const TInsn *);
-static bfd_boolean tinsn_has_invalid_symbolic_operands (const TInsn *);
-static bfd_boolean tinsn_has_complex_operands (const TInsn *);
-static bfd_boolean tinsn_to_insnbuf (TInsn *, xtensa_insnbuf);
-static bfd_boolean tinsn_check_arguments (const TInsn *);
+static bool tinsn_has_symbolic_operands (const TInsn *);
+static bool tinsn_has_invalid_symbolic_operands (const TInsn *);
+static bool tinsn_has_complex_operands (const TInsn *);
+static bool tinsn_to_insnbuf (TInsn *, xtensa_insnbuf);
+static bool tinsn_check_arguments (const TInsn *);
static void tinsn_from_chars (TInsn *, char *, int);
static void tinsn_immed_from_frag (TInsn *, fragS *, int);
static int get_num_stack_text_bytes (IStack *);
static int get_num_stack_literal_bytes (IStack *);
+static bool tinsn_to_slotbuf (xtensa_format, int, TInsn *, xtensa_insnbuf);
/* vliw_insn functions. */
static void xg_init_vinsn (vliw_insn *);
+static void xg_copy_vinsn (vliw_insn *, vliw_insn *);
static void xg_clear_vinsn (vliw_insn *);
-static bfd_boolean vinsn_has_specific_opcodes (vliw_insn *);
+static bool vinsn_has_specific_opcodes (vliw_insn *);
static void xg_free_vinsn (vliw_insn *);
-static bfd_boolean vinsn_to_insnbuf
- (vliw_insn *, char *, fragS *, bfd_boolean);
+static bool vinsn_to_insnbuf
+ (vliw_insn *, char *, fragS *, bool);
static void vinsn_from_chars (vliw_insn *, char *);
/* Expression Utilities. */
-bfd_boolean expr_is_const (const expressionS *);
+bool expr_is_const (const expressionS *);
offsetT get_expr_const (const expressionS *);
void set_expr_const (expressionS *, offsetT);
-bfd_boolean expr_is_register (const expressionS *);
+bool expr_is_register (const expressionS *);
offsetT get_expr_register (const expressionS *);
void set_expr_symbol_offset (expressionS *, symbolS *, offsetT);
-bfd_boolean expr_is_equal (expressionS *, expressionS *);
+bool expr_is_equal (expressionS *, expressionS *);
static void copy_expr (expressionS *, const expressionS *);
/* Section renaming. */
static xtensa_opcode xtensa_movi_opcode;
static xtensa_opcode xtensa_movi_n_opcode;
static xtensa_opcode xtensa_isync_opcode;
+static xtensa_opcode xtensa_j_opcode;
static xtensa_opcode xtensa_jx_opcode;
static xtensa_opcode xtensa_l32r_opcode;
static xtensa_opcode xtensa_loop_opcode;
static xtensa_opcode xtensa_retw_n_opcode;
static xtensa_opcode xtensa_rsr_lcount_opcode;
static xtensa_opcode xtensa_waiti_opcode;
+static int config_max_slots = 0;
\f
/* Command-line Options. */
-bfd_boolean use_literal_section = TRUE;
-static bfd_boolean align_targets = TRUE;
-static bfd_boolean warn_unaligned_branch_targets = FALSE;
-static bfd_boolean has_a0_b_retw = FALSE;
-static bfd_boolean workaround_a0_b_retw = FALSE;
-static bfd_boolean workaround_b_j_loop_end = FALSE;
-static bfd_boolean workaround_short_loop = FALSE;
-static bfd_boolean maybe_has_short_loop = FALSE;
-static bfd_boolean workaround_close_loop_end = FALSE;
-static bfd_boolean maybe_has_close_loop_end = FALSE;
-static bfd_boolean enforce_three_byte_loop_align = FALSE;
+bool use_literal_section = true;
+enum flix_level produce_flix = FLIX_ALL;
+static bool align_targets = true;
+static bool warn_unaligned_branch_targets = false;
+static bool has_a0_b_retw = false;
+static bool workaround_a0_b_retw = false;
+static bool workaround_b_j_loop_end = false;
+static bool workaround_short_loop = false;
+static bool maybe_has_short_loop = false;
+static bool workaround_close_loop_end = false;
+static bool maybe_has_close_loop_end = false;
+static bool enforce_three_byte_loop_align = false;
+static bool opt_linkrelax = true;
/* When workaround_short_loops is TRUE, all loops with early exits must
have at least 3 instructions. workaround_all_short_loops is a modifier
workaround_short_loop actions, all straightline loopgtz and loopnez
must have at least 3 instructions. */
-static bfd_boolean workaround_all_short_loops = FALSE;
+static bool workaround_all_short_loops = false;
+
+/* Generate individual property section for every section.
+ This option is defined in BDF library. */
+extern bool elf32xtensa_separate_props;
+/* Xtensa ABI.
+ This option is defined in BDF library. */
+extern int elf32xtensa_abi;
static void
xtensa_setup_hw_workarounds (int earliest, int latest)
/* Enable all workarounds for pre-T1050.0 hardware. */
if (earliest < 105000 || latest < 105000)
{
- workaround_a0_b_retw |= TRUE;
- workaround_b_j_loop_end |= TRUE;
- workaround_short_loop |= TRUE;
- workaround_close_loop_end |= TRUE;
- workaround_all_short_loops |= TRUE;
- enforce_three_byte_loop_align = TRUE;
+ workaround_a0_b_retw |= true;
+ workaround_b_j_loop_end |= true;
+ workaround_short_loop |= true;
+ workaround_close_loop_end |= true;
+ workaround_all_short_loops |= true;
+ enforce_three_byte_loop_align = true;
}
}
option_density = OPTION_MD_BASE,
option_no_density,
+ option_flix,
+ option_no_generate_flix,
+ option_no_flix,
+
option_relax,
option_no_relax,
option_prefer_l32r,
option_prefer_const16,
- option_target_hardware
+ option_target_hardware,
+
+ option_trampolines,
+ option_no_trampolines,
+
+ option_auto_litpools,
+ option_no_auto_litpools,
+ option_auto_litpool_limit,
+
+ option_separate_props,
+ option_no_separate_props,
+
+ option_abi_windowed,
+ option_abi_call0,
};
const char *md_shortopts = "";
{ "density", no_argument, NULL, option_density },
{ "no-density", no_argument, NULL, option_no_density },
+ { "flix", no_argument, NULL, option_flix },
+ { "no-generate-flix", no_argument, NULL, option_no_generate_flix },
+ { "no-allow-flix", no_argument, NULL, option_no_flix },
+
/* Both "relax" and "generics" are deprecated and treated as equivalent
to the "transform" option. */
{ "relax", no_argument, NULL, option_relax },
{ "target-hardware", required_argument, NULL, option_target_hardware },
+ { "trampolines", no_argument, NULL, option_trampolines },
+ { "no-trampolines", no_argument, NULL, option_no_trampolines },
+
+ { "auto-litpools", no_argument, NULL, option_auto_litpools },
+ { "no-auto-litpools", no_argument, NULL, option_no_auto_litpools },
+ { "auto-litpool-limit", required_argument, NULL, option_auto_litpool_limit },
+
+ { "separate-prop-tables", no_argument, NULL, option_separate_props },
+
+ { "abi-windowed", no_argument, NULL, option_abi_windowed },
+ { "abi-call0", no_argument, NULL, option_abi_call0 },
+
{ NULL, no_argument, NULL, 0 }
};
int
-md_parse_option (int c, char *arg)
+md_parse_option (int c, const char *arg)
{
switch (c)
{
as_warn (_("--no-density option is ignored"));
return 1;
case option_link_relax:
- linkrelax = 1;
+ opt_linkrelax = true;
return 1;
case option_no_link_relax:
- linkrelax = 0;
+ opt_linkrelax = false;
+ return 1;
+ case option_flix:
+ produce_flix = FLIX_ALL;
+ return 1;
+ case option_no_generate_flix:
+ produce_flix = FLIX_NO_GENERATE;
+ return 1;
+ case option_no_flix:
+ produce_flix = FLIX_NONE;
return 1;
case option_generics:
as_warn (_("--generics is deprecated; use --transform instead"));
as_warn (_("--no-relax is deprecated; use --no-transform instead"));
return md_parse_option (option_no_transform, arg);
case option_longcalls:
- directive_state[directive_longcalls] = TRUE;
+ directive_state[directive_longcalls] = true;
return 1;
case option_no_longcalls:
- directive_state[directive_longcalls] = FALSE;
+ directive_state[directive_longcalls] = false;
return 1;
case option_text_section_literals:
- use_literal_section = FALSE;
+ use_literal_section = false;
return 1;
case option_no_text_section_literals:
- use_literal_section = TRUE;
+ use_literal_section = true;
return 1;
case option_absolute_literals:
if (!absolute_literals_supported)
as_fatal (_("--absolute-literals option not supported in this Xtensa configuration"));
return 0;
}
- directive_state[directive_absolute_literals] = TRUE;
+ directive_state[directive_absolute_literals] = true;
return 1;
case option_no_absolute_literals:
- directive_state[directive_absolute_literals] = FALSE;
+ directive_state[directive_absolute_literals] = false;
return 1;
case option_workaround_a0_b_retw:
- workaround_a0_b_retw = TRUE;
+ workaround_a0_b_retw = true;
return 1;
case option_no_workaround_a0_b_retw:
- workaround_a0_b_retw = FALSE;
+ workaround_a0_b_retw = false;
return 1;
case option_workaround_b_j_loop_end:
- workaround_b_j_loop_end = TRUE;
+ workaround_b_j_loop_end = true;
return 1;
case option_no_workaround_b_j_loop_end:
- workaround_b_j_loop_end = FALSE;
+ workaround_b_j_loop_end = false;
return 1;
case option_workaround_short_loop:
- workaround_short_loop = TRUE;
+ workaround_short_loop = true;
return 1;
case option_no_workaround_short_loop:
- workaround_short_loop = FALSE;
+ workaround_short_loop = false;
return 1;
case option_workaround_all_short_loops:
- workaround_all_short_loops = TRUE;
+ workaround_all_short_loops = true;
return 1;
case option_no_workaround_all_short_loops:
- workaround_all_short_loops = FALSE;
+ workaround_all_short_loops = false;
return 1;
case option_workaround_close_loop_end:
- workaround_close_loop_end = TRUE;
+ workaround_close_loop_end = true;
return 1;
case option_no_workaround_close_loop_end:
- workaround_close_loop_end = FALSE;
+ workaround_close_loop_end = false;
return 1;
case option_no_workarounds:
- workaround_a0_b_retw = FALSE;
- workaround_b_j_loop_end = FALSE;
- workaround_short_loop = FALSE;
- workaround_all_short_loops = FALSE;
- workaround_close_loop_end = FALSE;
+ workaround_a0_b_retw = false;
+ workaround_b_j_loop_end = false;
+ workaround_short_loop = false;
+ workaround_all_short_loops = false;
+ workaround_close_loop_end = false;
return 1;
case option_align_targets:
- align_targets = TRUE;
+ align_targets = true;
return 1;
case option_no_align_targets:
- align_targets = FALSE;
+ align_targets = false;
return 1;
case option_warn_unaligned_targets:
- warn_unaligned_branch_targets = TRUE;
+ warn_unaligned_branch_targets = true;
return 1;
case option_rename_section_name:
case option_target_hardware:
{
int earliest, latest = 0;
+ char *end;
if (*arg == 0 || *arg == '-')
as_fatal (_("invalid target hardware version"));
- earliest = strtol (arg, &arg, 0);
+ earliest = strtol (arg, &end, 0);
- if (*arg == 0)
+ if (*end == 0)
latest = earliest;
- else if (*arg == '-')
+ else if (*end == '-')
{
- if (*++arg == 0)
+ if (*++end == 0)
as_fatal (_("invalid target hardware version"));
- latest = strtol (arg, &arg, 0);
+ latest = strtol (end, &end, 0);
}
- if (*arg != 0)
+ if (*end != 0)
as_fatal (_("invalid target hardware version"));
xtensa_setup_hw_workarounds (earliest, latest);
you perform any transformation, always check if transform
is available. If you use the functions we provide for this
purpose, you will be ok. */
- directive_state[directive_transform] = FALSE;
+ directive_state[directive_transform] = false;
+ return 1;
+
+ case option_trampolines:
+ use_trampolines = true;
+ return 1;
+
+ case option_no_trampolines:
+ use_trampolines = false;
+ return 1;
+
+ case option_auto_litpools:
+ auto_litpools = true;
+ use_literal_section = false;
+ if (auto_litpool_limit <= 0)
+ auto_litpool_limit = MAX_AUTO_POOL_LITERALS / 2;
+ return 1;
+
+ case option_no_auto_litpools:
+ auto_litpools = false;
+ auto_litpool_limit = -1;
+ return 1;
+
+ case option_auto_litpool_limit:
+ {
+ int value = 0;
+ char *end;
+ if (auto_litpool_limit < 0)
+ as_fatal (_("no-auto-litpools is incompatible with auto-litpool-limit"));
+ if (*arg == 0 || *arg == '-')
+ as_fatal (_("invalid auto-litpool-limit argument"));
+ value = strtol (arg, &end, 10);
+ if (*end != 0)
+ as_fatal (_("invalid auto-litpool-limit argument"));
+ if (value < 100 || value > 10000)
+ as_fatal (_("invalid auto-litpool-limit argument (range is 100-10000)"));
+ auto_litpool_limit = value;
+ auto_litpools = true;
+ use_literal_section = false;
+ return 1;
+ }
+
+ case option_separate_props:
+ elf32xtensa_separate_props = true;
+ return 1;
+
+ case option_no_separate_props:
+ elf32xtensa_separate_props = false;
+ return 1;
+
+ case option_abi_windowed:
+ elf32xtensa_abi = XTHAL_ABI_WINDOWED;
+ return 1;
+
+ case option_abi_call0:
+ elf32xtensa_abi = XTHAL_ABI_CALL0;
return 1;
default:
--[no-]target-align [Do not] try to align branch targets\n\
--[no-]longcalls [Do not] emit 32-bit call sequences\n\
--[no-]transform [Do not] transform instructions\n\
- --rename-section old=new Rename section 'old' to 'new'\n", stream);
+ --flix both allow hand-written and generate flix bundles\n\
+ --no-generate-flix allow hand-written but do not generate\n\
+ flix bundles\n\
+ --no-allow-flix neither allow hand-written nor generate\n\
+ flix bundles\n\
+ --rename-section old=new Rename section 'old' to 'new'\n\
+ --[no-]trampolines [Do not] generate trampolines (jumps to jumps)\n\
+ when jumps do not reach their targets\n\
+ --[no-]auto-litpools [Do not] automatically create literal pools\n\
+ --auto-litpool-limit=<value>\n\
+ (range 100-10000) Maximum number of blocks of\n\
+ instructions to emit between literal pool\n\
+ locations; implies --auto-litpools flag\n\
+ --[no-]separate-prop-tables\n\
+ [Do not] place Xtensa property records into\n\
+ individual property sections for each section.\n\
+ Default is to generate single property section.\n", stream);
}
\f
sym_list *l;
if (!free_insn_labels)
- l = (sym_list *) xmalloc (sizeof (sym_list));
+ l = XNEW (sym_list);
else
{
l = free_insn_labels;
typedef struct state_stackS_struct
{
directiveE directive;
- bfd_boolean negated;
- bfd_boolean old_state;
+ bool negated;
+ bool old_state;
const char *file;
unsigned int line;
const void *datum;
};
-static bfd_boolean
+static bool
use_transform (void)
{
/* After md_end, you should be checking frag by frag, rather
than state directives. */
- assert (!past_xtensa_end);
+ gas_assert (!past_xtensa_end);
return directive_state[directive_transform];
}
-static bfd_boolean
+static bool
do_align_targets (void)
{
/* Do not use this function after md_end; just look at align_targets
instead. There is no target-align directive, so alignment is either
enabled for all frags or not done at all. */
- assert (!past_xtensa_end);
+ gas_assert (!past_xtensa_end);
return align_targets && use_transform ();
}
static void
-directive_push (directiveE directive, bfd_boolean negated, const void *datum)
+directive_push (directiveE directive, bool negated, const void *datum)
{
- char *file;
+ const char *file;
unsigned int line;
- state_stackS *stack = (state_stackS *) xmalloc (sizeof (state_stackS));
+ state_stackS *stack = XNEW (state_stackS);
- as_where (&file, &line);
+ file = as_where (&line);
stack->directive = directive;
stack->negated = negated;
static void
directive_pop (directiveE *directive,
- bfd_boolean *negated,
+ bool *negated,
const char **file,
unsigned int *line,
const void **datum)
if (!directive_state_stack)
{
- as_bad (_("unmatched end directive"));
+ as_bad (_("unmatched .end directive"));
*directive = directive_none;
return;
}
while (directive_state_stack)
{
directiveE directive;
- bfd_boolean negated;
+ bool negated;
const char *file;
unsigned int line;
const void *datum;
}
-static bfd_boolean
+static bool
inside_directive (directiveE dir)
{
state_stackS *top = directive_state_stack;
static void
-get_directive (directiveE *directive, bfd_boolean *negated)
+get_directive (directiveE *directive, bool *negated)
{
int len;
unsigned i;
- char *directive_string;
+ const char *directive_string;
- if (strncmp (input_line_pointer, "no-", 3) != 0)
- *negated = FALSE;
+ if (!startswith (input_line_pointer, "no-"))
+ *negated = false;
else
{
- *negated = TRUE;
+ *negated = true;
input_line_pointer += 3;
}
equivalent to .begin [no-]transform. We should remove it when
we stop accepting those options. */
- if (strncmp (input_line_pointer, "generics", strlen ("generics")) == 0)
+ if (startswith (input_line_pointer, "generics"))
{
as_warn (_("[no-]generics is deprecated; use [no-]transform instead"));
directive_string = "transform";
}
- else if (strncmp (input_line_pointer, "relax", strlen ("relax")) == 0)
+ else if (startswith (input_line_pointer, "relax"))
{
as_warn (_("[no-]relax is deprecated; use [no-]transform instead"));
directive_string = "transform";
xtensa_begin_directive (int ignore ATTRIBUTE_UNUSED)
{
directiveE directive;
- bfd_boolean negated;
+ bool negated;
emit_state *state;
lit_state *ls;
insn_labels = NULL;
}
as_warn (_(".begin literal is deprecated; use .literal instead"));
- state = (emit_state *) xmalloc (sizeof (emit_state));
+ state = XNEW (emit_state);
xtensa_switch_to_literal_fragment (state);
directive_push (directive_literal, negated, state);
break;
/* Allocate the literal state for this section and push
onto the directive stack. */
- ls = xmalloc (sizeof (lit_state));
- assert (ls);
+ ls = XNEW (lit_state);
+ gas_assert (ls);
*ls = default_lit_sections;
directive_push (directive_literal_prefix, negated, ls);
xtensa_end_directive (int ignore ATTRIBUTE_UNUSED)
{
directiveE begin_directive, end_directive;
- bfd_boolean begin_negated, end_negated;
+ bool begin_negated, end_negated;
const char *file;
unsigned int line;
emit_state *state;
md_flush_pending_output ();
- switch (end_directive)
+ switch ((int) end_directive)
{
- case (directiveE) XTENSA_UNDEFINED:
+ case XTENSA_UNDEFINED:
discard_rest_of_line ();
return;
- case directive_density:
+ case (int) directive_density:
as_warn (_(".end [no-]density is ignored"));
demand_empty_rest_of_line ();
break;
- case directive_absolute_literals:
+ case (int) directive_absolute_literals:
if (!absolute_literals_supported && !end_negated)
{
as_warn (_("Xtensa absolute literals option not supported; ignored"));
case directive_literal_prefix:
/* Restore the default collection sections from saved state. */
s = (lit_state *) state;
- assert (s);
+ gas_assert (s);
default_lit_sections = *s;
/* Free the state storage. */
emit_state state;
char *p, *base_name;
char c;
- segT dest_seg;
if (inside_directive (directive_literal))
{
saved_insn_labels = insn_labels;
insn_labels = NULL;
- /* If we are using text-section literals, then this is the right value... */
- dest_seg = now_seg;
-
base_name = input_line_pointer;
xtensa_switch_to_literal_fragment (&state);
- /* ...but if we aren't using text-section-literals, then we
- need to put them in the section we just switched to. */
- if (use_literal_section || directive_state[directive_absolute_literals])
- dest_seg = now_seg;
-
/* All literals are aligned to four-byte boundaries. */
frag_align (2, 0, 0);
record_alignment (now_seg, 2);
- c = get_symbol_end ();
+ c = get_symbol_name (&base_name);
/* Just after name is now '\0'. */
p = input_line_pointer;
*p = c;
- SKIP_WHITESPACE ();
+ SKIP_WHITESPACE_AFTER_NAME ();
if (*input_line_pointer != ',' && *input_line_pointer != ':')
{
xtensa_restore_emit_state (&state);
return;
}
- *p = 0;
+ *p = 0;
colon (base_name);
-
*p = c;
+
input_line_pointer++; /* skip ',' or ':' */
xtensa_elf_cons (4);
"abcdefghijklmnopqrstuvwxyz_/0123456789.$");
/* Get a null-terminated copy of the name. */
- name = xmalloc (len + 1);
- assert (name);
- strncpy (name, input_line_pointer, len);
- name[len] = 0;
+ name = xmemdup0 (input_line_pointer, len);
/* Skip the name in the input line. */
input_line_pointer += len;
as_bad (_("opcode-specific %s relocation used outside "
"an instruction"), reloc_howto->name);
else if (nbytes != (int) bfd_get_reloc_size (reloc_howto))
- as_bad (_("%s relocations do not fit in %d bytes"),
+ as_bad (ngettext ("%s relocations do not fit in %d byte",
+ "%s relocations do not fit in %d bytes",
+ nbytes),
reloc_howto->name, nbytes);
+ else if (reloc == BFD_RELOC_XTENSA_TLS_FUNC
+ || reloc == BFD_RELOC_XTENSA_TLS_ARG
+ || reloc == BFD_RELOC_XTENSA_TLS_CALL)
+ as_bad (_("invalid use of %s relocation"), reloc_howto->name);
else
{
char *p = frag_more ((int) nbytes);
demand_empty_rest_of_line ();
}
-static bfd_boolean is_leb128_expr;
+static bool is_leb128_expr;
static void
xtensa_leb128 (int sign)
{
- is_leb128_expr = TRUE;
+ is_leb128_expr = true;
s_leb128 (sign);
- is_leb128_expr = FALSE;
+ is_leb128_expr = false;
}
\f
char *str2;
int ch;
int len;
- struct suffix_reloc_map *ptr;
+ unsigned int i;
if (*str++ != '@')
return BFD_RELOC_NONE;
len = str2 - ident;
ch = ident[0];
- for (ptr = &suffix_relocs[0]; ptr->length > 0; ptr++)
- if (ch == ptr->suffix[0]
- && len == ptr->length
- && memcmp (ident, ptr->suffix, ptr->length) == 0)
+ for (i = 0; i < ARRAY_SIZE (suffix_relocs); i++)
+ if (ch == suffix_relocs[i].suffix[0]
+ && len == suffix_relocs[i].length
+ && memcmp (ident, suffix_relocs[i].suffix, suffix_relocs[i].length) == 0)
{
/* Now check for "identifier@suffix+constant". */
if (*str == '-' || *str == '+')
}
*str_p = str;
- return ptr->reloc;
+ return suffix_relocs[i].reloc;
}
return BFD_RELOC_UNUSED;
/* Find the matching operator type. */
-static unsigned char
+static operatorT
map_suffix_reloc_to_operator (bfd_reloc_code_real_type reloc)
{
- struct suffix_reloc_map *sfx;
- unsigned char operator = (unsigned char) -1;
-
- for (sfx = &suffix_relocs[0]; sfx->suffix; sfx++)
+ operatorT operator = O_illegal;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE (suffix_relocs); i++)
{
- if (sfx->reloc == reloc)
+ if (suffix_relocs[i].reloc == reloc)
{
- operator = sfx->operator;
+ operator = suffix_relocs[i].operator;
break;
}
}
- assert (operator != (unsigned char) -1);
+ gas_assert (operator != O_illegal);
return operator;
}
/* Find the matching reloc type. */
static bfd_reloc_code_real_type
-map_operator_to_reloc (unsigned char operator)
+map_operator_to_reloc (unsigned char operator, bool is_literal)
{
- struct suffix_reloc_map *sfx;
+ unsigned int i;
bfd_reloc_code_real_type reloc = BFD_RELOC_UNUSED;
- for (sfx = &suffix_relocs[0]; sfx->suffix; sfx++)
+ for (i = 0; i < ARRAY_SIZE (suffix_relocs); i++)
{
- if (sfx->operator == operator)
+ if (suffix_relocs[i].operator == operator)
{
- reloc = sfx->reloc;
+ reloc = suffix_relocs[i].reloc;
break;
}
}
+ if (is_literal)
+ {
+ if (reloc == BFD_RELOC_XTENSA_TLS_FUNC)
+ return BFD_RELOC_XTENSA_TLSDESC_FN;
+ else if (reloc == BFD_RELOC_XTENSA_TLS_ARG)
+ return BFD_RELOC_XTENSA_TLSDESC_ARG;
+ }
+
if (reloc == BFD_RELOC_UNUSED)
return BFD_RELOC_32;
{
bfd_reloc_code_real_type reloc;
segT t = expression (tok);
+
if (t == absolute_section
&& xtensa_operand_is_PCrelative (isa, opc, opnd) == 1)
{
- assert (tok->X_op == O_constant);
+ gas_assert (tok->X_op == O_constant);
tok->X_op = O_symbol;
tok->X_add_symbol = &abs_symbol;
}
tokenize_arguments (char **args, char *str)
{
char *old_input_line_pointer;
- bfd_boolean saw_comma = FALSE;
- bfd_boolean saw_arg = FALSE;
- bfd_boolean saw_colon = FALSE;
+ bool saw_comma = false;
+ bool saw_arg = false;
+ bool saw_colon = false;
int num_args = 0;
char *arg_end, *arg;
int arg_len;
input_line_pointer++;
if (saw_comma || saw_colon || !saw_arg)
goto err;
- saw_colon = TRUE;
+ saw_colon = true;
break;
case ',':
input_line_pointer++;
if (saw_comma || saw_colon || !saw_arg)
goto err;
- saw_comma = TRUE;
+ saw_comma = true;
break;
default:
arg_end += 1;
arg_len = arg_end - input_line_pointer;
- arg = (char *) xmalloc ((saw_colon ? 1 : 0) + arg_len + 1);
+ arg = XNEWVEC (char, (saw_colon ? 1 : 0) + arg_len + 1);
args[num_args] = arg;
if (saw_colon)
input_line_pointer = arg_end;
num_args += 1;
- saw_comma = FALSE;
- saw_colon = FALSE;
- saw_arg = TRUE;
+ saw_comma = false;
+ saw_colon = false;
+ saw_arg = true;
break;
}
}
-fini:
+ fini:
if (saw_comma || saw_colon)
goto err;
input_line_pointer = old_input_line_pointer;
return num_args;
-err:
+ err:
if (saw_comma)
as_bad (_("extra comma"));
else if (saw_colon)
/* Parse the arguments to an opcode. Return TRUE on error. */
-static bfd_boolean
+static bool
parse_arguments (TInsn *insn, int num_args, char **arg_strings)
{
expressionS *tok, *last_tok;
xtensa_opcode opcode = insn->opcode;
- bfd_boolean had_error = TRUE;
+ bool had_error = true;
xtensa_isa isa = xtensa_default_isa;
int n, num_regs = 0;
int opcode_operand_count;
input_line_pointer++;
if (num_regs == 0)
goto err;
- assert (opnd_cnt > 0);
+ gas_assert (opnd_cnt > 0);
num_regs--;
opnd_rf = xtensa_operand_regfile (isa, opcode, last_opnd_cnt);
if (next_reg
as_warn (_("too many arguments"));
goto err;
}
- assert (opnd_cnt < MAX_INSN_ARGS);
+ gas_assert (opnd_cnt < MAX_INSN_ARGS);
expression_maybe_register (opcode, opnd_cnt, tok);
next_reg = tok->X_add_number + 1;
last_tok = tok;
last_opnd_cnt = opnd_cnt;
+ demand_empty_rest_of_line ();
do
{
goto err;
insn->ntok = tok - insn->tok;
- had_error = FALSE;
+ had_error = false;
err:
input_line_pointer = old_input_line_pointer;
cnt_arg = *cnt_argp;
/* replace the argument with "31-(argument)" */
- new_arg = (char *) xmalloc (strlen (cnt_arg) + 6);
- sprintf (new_arg, "31-(%s)", cnt_arg);
+ new_arg = concat ("31-(", cnt_arg, ")", (char *) NULL);
free (cnt_arg);
*cnt_argp = new_arg;
static void
-xg_replace_opname (char **popname, char *newop)
+xg_replace_opname (char **popname, const char *newop)
{
free (*popname);
- *popname = (char *) xmalloc (strlen (newop) + 1);
- strcpy (*popname, newop);
+ *popname = xstrdup (newop);
}
/* Another special case for "WSR.INTSET".... */
if (is_write && !is_user && !strcasecmp ("interrupt", sr_name))
sr_name = "intset";
- new_opname = (char *) xmalloc (strlen (sr_name) + 6);
- sprintf (new_opname, "%s.%s", *popname, sr_name);
+ new_opname = concat (*popname, ".", sr_name, (char *) NULL);
free (*popname);
*popname = new_opname;
xtensa_sysreg sr;
char *opname, *new_opname;
const char *sr_name;
- bfd_boolean has_underbar = FALSE;
+ bool has_underbar = false;
opname = *popname;
if (opname[0] == '_')
{
- has_underbar = TRUE;
+ has_underbar = true;
opname += 1;
}
/* Translate the opcode. */
sr_name = xtensa_sysreg_name (isa, sr);
- new_opname = (char *) xmalloc (strlen (sr_name) + 6);
+ new_opname = XNEWVEC (char, strlen (sr_name) + 6);
sprintf (new_opname, "%s%cur.%s", (has_underbar ? "_" : ""),
opname[0], sr_name);
free (*popname);
static int
-xtensa_translate_zero_immed (char *old_op,
- char *new_op,
+xtensa_translate_zero_immed (const char *old_op,
+ const char *new_op,
char **popname,
int *pnum_args,
char **arg_strings)
offsetT val;
opname = *popname;
- assert (opname[0] != '_');
+ gas_assert (opname[0] != '_');
if (strcmp (opname, old_op) != 0)
return 0;
xg_translate_idioms (char **popname, int *pnum_args, char **arg_strings)
{
char *opname = *popname;
- bfd_boolean has_underbar = FALSE;
+ bool has_underbar = false;
if (*opname == '_')
{
- has_underbar = TRUE;
+ has_underbar = true;
opname += 1;
}
if (xg_check_num_args (pnum_args, 2, opname, arg_strings))
return -1;
xg_replace_opname (popname, (has_underbar ? "_or" : "or"));
- arg_strings[2] = (char *) xmalloc (strlen (arg_strings[1]) + 1);
- strcpy (arg_strings[2], arg_strings[1]);
+ arg_strings[2] = xstrdup (arg_strings[1]);
*pnum_args = 3;
}
return 0;
}
+ /* Without an operand, this is given a default immediate operand of 0. */
+ if ((strcmp (opname, "simcall") == 0 && microarch_earliest >= 280000))
+ {
+ if (*pnum_args == 0)
+ {
+ arg_strings[0] = (char *) xmalloc (2);
+ strcpy (arg_strings[0], "0");
+ *pnum_args = 1;
+ }
+ return 0;
+ }
+
if (strcmp (opname, "bbsi.l") == 0)
{
if (xg_check_num_args (pnum_args, 3, opname, arg_strings))
}
/* Don't do anything special with NOPs inside FLIX instructions. They
- are handled elsewhere. Real NOP instructions are always available
+ are handled elsewhere. Real NOP instructions are always available
in configurations with FLIX, so this should never be an issue but
check for it anyway. */
if (!cur_vinsn.inside_bundle && xtensa_nop_opcode == XTENSA_UNDEFINED
if (xg_check_num_args (pnum_args, 0, opname, arg_strings))
return -1;
xg_replace_opname (popname, (has_underbar ? "_or" : "or"));
- arg_strings[0] = (char *) xmalloc (3);
- arg_strings[1] = (char *) xmalloc (3);
- arg_strings[2] = (char *) xmalloc (3);
- strcpy (arg_strings[0], "a1");
- strcpy (arg_strings[1], "a1");
- strcpy (arg_strings[2], "a1");
+ arg_strings[0] = xstrdup ("a1");
+ arg_strings[1] = xstrdup ("a1");
+ arg_strings[2] = xstrdup ("a1");
*pnum_args = 3;
}
return 0;
#endif /* TENSILICA_DEBUG */
-static bfd_boolean
+static bool
is_direct_call_opcode (xtensa_opcode opcode)
{
xtensa_isa isa = xtensa_default_isa;
int n, num_operands;
if (xtensa_opcode_is_call (isa, opcode) != 1)
- return FALSE;
+ return false;
num_operands = xtensa_opcode_num_operands (isa, opcode);
for (n = 0; n < num_operands; n++)
{
if (xtensa_operand_is_register (isa, opcode, n) == 0
&& xtensa_operand_is_PCrelative (isa, opcode, n) == 1)
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
Returns non-zero on failure. */
static int
-decode_reloc (bfd_reloc_code_real_type reloc, int *slot, bfd_boolean *is_alt)
+decode_reloc (bfd_reloc_code_real_type reloc, int *slot, bool *is_alt)
{
if (reloc >= BFD_RELOC_XTENSA_SLOT0_OP
&& reloc <= BFD_RELOC_XTENSA_SLOT14_OP)
{
*slot = reloc - BFD_RELOC_XTENSA_SLOT0_OP;
- *is_alt = FALSE;
+ *is_alt = false;
}
else if (reloc >= BFD_RELOC_XTENSA_SLOT0_ALT
&& reloc <= BFD_RELOC_XTENSA_SLOT14_ALT)
{
*slot = reloc - BFD_RELOC_XTENSA_SLOT0_ALT;
- *is_alt = TRUE;
+ *is_alt = true;
}
else
return -1;
if (xtensa_operand_is_PCrelative (xtensa_default_isa, opcode, operand)
== 1)
as_bad_where ((char *) file, line,
- _("operand %d of '%s' has out of range value '%u'"),
+ _("operand %d of '%s' has out of range value '%u'"),
operand + 1,
xtensa_opcode_name (xtensa_default_isa, opcode),
value);
/* The routine xg_instruction_matches_option_term must return TRUE
when a given option term is true. The meaning of all of the option
- terms is given interpretation by this function. This is needed when
- an option depends on the state of a directive, but there are no such
- options in use right now. */
+ terms is given interpretation by this function. */
-static bfd_boolean
-xg_instruction_matches_option_term (TInsn *insn ATTRIBUTE_UNUSED,
- const ReqOrOption *option)
+static bool
+xg_instruction_matches_option_term (TInsn *insn, const ReqOrOption *option)
{
if (strcmp (option->option_name, "realnop") == 0
- || strncmp (option->option_name, "IsaUse", 6) == 0)
+ || startswith (option->option_name, "IsaUse"))
{
/* These conditions were evaluated statically when building the
relaxation table. There's no need to reevaluate them now. */
- return TRUE;
+ return true;
}
+ else if (strcmp (option->option_name, "FREEREG") == 0)
+ return insn->extra_arg.X_op == O_register;
else
{
as_fatal (_("internal error: unknown option name '%s'"),
}
-static bfd_boolean
+static bool
xg_instruction_matches_or_options (TInsn *insn,
const ReqOrOptionList *or_option)
{
for (option = or_option; option != NULL; option = option->next)
{
if (xg_instruction_matches_option_term (insn, option))
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
-static bfd_boolean
+static bool
xg_instruction_matches_options (TInsn *insn, const ReqOptionList *options)
{
const ReqOption *req_options;
/* Must match one of the OR clauses. */
if (!xg_instruction_matches_or_options (insn,
req_options->or_option_terms))
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
/* Return the transition rule that matches or NULL if none matches. */
-static bfd_boolean
+static bool
xg_instruction_matches_rule (TInsn *insn, TransitionRule *rule)
{
PreconditionList *condition_l;
if (rule->opcode != insn->opcode)
- return FALSE;
+ return false;
for (condition_l = rule->conditions;
condition_l != NULL;
{
case OP_CONSTANT:
/* The expression must be the constant. */
- assert (cond->op_num < insn->ntok);
+ gas_assert (cond->op_num < insn->ntok);
exp1 = &insn->tok[cond->op_num];
if (expr_is_const (exp1))
{
{
case OP_EQUAL:
if (get_expr_const (exp1) != cond->op_data)
- return FALSE;
+ return false;
break;
case OP_NOTEQUAL:
if (get_expr_const (exp1) == cond->op_data)
- return FALSE;
+ return false;
break;
default:
- return FALSE;
+ return false;
}
}
else if (expr_is_register (exp1))
{
case OP_EQUAL:
if (get_expr_register (exp1) != cond->op_data)
- return FALSE;
+ return false;
break;
case OP_NOTEQUAL:
if (get_expr_register (exp1) == cond->op_data)
- return FALSE;
+ return false;
break;
default:
- return FALSE;
+ return false;
}
}
else
- return FALSE;
+ return false;
break;
case OP_OPERAND:
- assert (cond->op_num < insn->ntok);
- assert (cond->op_data < insn->ntok);
+ gas_assert (cond->op_num < insn->ntok);
+ gas_assert (cond->op_data < insn->ntok);
exp1 = &insn->tok[cond->op_num];
exp2 = &insn->tok[cond->op_data];
{
case OP_EQUAL:
if (!expr_is_equal (exp1, exp2))
- return FALSE;
+ return false;
break;
case OP_NOTEQUAL:
if (expr_is_equal (exp1, exp2))
- return FALSE;
+ return false;
break;
}
break;
case OP_LITERAL:
case OP_LABEL:
default:
- return FALSE;
+ return false;
}
}
if (!xg_instruction_matches_options (insn, rule->options))
- return FALSE;
+ return false;
- return TRUE;
+ return true;
}
static int
transition_rule_cmp (const TransitionRule *a, const TransitionRule *b)
{
- bfd_boolean a_greater = FALSE;
- bfd_boolean b_greater = FALSE;
+ bool a_greater = false;
+ bool b_greater = false;
ReqOptionList *l_a = a->options;
ReqOptionList *l_b = b->options;
&& strcmp (l_or_b->option_name, "IsaUseL32R") == 0)
{
if (prefer_const16)
- a_greater = TRUE;
+ a_greater = true;
else
- b_greater = TRUE;
+ b_greater = true;
}
else if (strcmp (l_or_a->option_name, "IsaUseL32R") == 0
&& strcmp (l_or_b->option_name, "IsaUseConst16") == 0)
{
if (prefer_const16)
- b_greater = TRUE;
+ b_greater = true;
else
- a_greater = TRUE;
+ a_greater = true;
}
else
return 0;
{
TransitionTable *table = xg_build_simplify_table (&transition_rule_cmp);
TransitionList *l;
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->opcode < table->num_opcodes);
/* Walk through all of the possible transitions. */
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
\f
/* Various Other Internal Functions. */
-static bfd_boolean
+static bool
is_unique_insn_expansion (TransitionRule *r)
{
if (!r->to_instr || r->to_instr->next != NULL)
- return FALSE;
+ return false;
if (r->to_instr->typ != INSTR_INSTR)
- return FALSE;
- return TRUE;
+ return false;
+ return true;
}
exclude cases like ADDI being "widened" to an ADDMI, which may
later be relaxed to an ADDMI/ADDI pair. */
-bfd_boolean
-xg_is_single_relaxable_insn (TInsn *insn, TInsn *targ, bfd_boolean narrow_only)
+bool
+xg_is_single_relaxable_insn (TInsn *insn, TInsn *targ, bool narrow_only)
{
TransitionTable *table = xg_build_widen_table (&transition_rule_cmp);
TransitionList *l;
TransitionRule *match = 0;
- assert (insn->insn_type == ITYPE_INSN);
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->opcode < table->num_opcodes);
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
{
<= xg_get_single_size (rule->to_instr->opcode)))
{
if (match)
- return FALSE;
+ return false;
match = rule;
}
}
if (!match)
- return FALSE;
+ return false;
if (targ)
xg_build_to_insn (targ, insn, match->to_instr);
- return TRUE;
+ return true;
}
TransitionList *l;
int max_size = xg_get_single_size (opcode);
- assert (opcode < table->num_opcodes);
+ gas_assert (opcode < table->num_opcodes);
for (l = table->table[opcode]; l != NULL; l = l->next)
{
build_list = rule->to_instr;
if (is_unique_insn_expansion (rule))
{
- assert (build_list->typ == INSTR_INSTR);
+ gas_assert (build_list->typ == INSTR_INSTR);
this_size = xg_get_max_insn_widen_size (build_list->opcode);
}
else
TransitionList *l;
int max_size = 0;
- assert (opcode < table->num_opcodes);
+ gas_assert (opcode < table->num_opcodes);
for (l = table->table[opcode]; l != NULL; l = l->next)
{
build_list = rule->to_instr;
if (is_unique_insn_expansion (rule))
{
- assert (build_list->typ == INSTR_INSTR);
+ gas_assert (build_list->typ == INSTR_INSTR);
this_size = xg_get_max_insn_widen_literal_size (build_list->opcode);
}
else
}
-static bfd_boolean
+static bool
xg_is_relaxable_insn (TInsn *insn, int lateral_steps)
{
int steps_taken = 0;
TransitionTable *table = xg_build_widen_table (&transition_rule_cmp);
TransitionList *l;
- assert (insn->insn_type == ITYPE_INSN);
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->opcode < table->num_opcodes);
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
{
if (xg_instruction_matches_rule (insn, rule))
{
if (steps_taken == lateral_steps)
- return TRUE;
+ return true;
steps_taken++;
}
}
- return FALSE;
+ return false;
}
}
-static bfd_boolean
+static bool
xg_valid_literal_expression (const expressionS *exp)
{
switch (exp->X_op)
case O_subtract:
case O_pltrel:
case O_pcrel:
- return TRUE;
+ case O_tlsfunc:
+ case O_tlsarg:
+ case O_tpoff:
+ case O_dtpoff:
+ return true;
default:
- return FALSE;
+ return false;
}
}
/* This will check to see if the value can be converted into the
operand type. It will return TRUE if it does not fit. */
-static bfd_boolean
+static bool
xg_check_operand (int32 value, xtensa_opcode opcode, int operand)
{
uint32 valbuf = value;
if (xtensa_operand_encode (xtensa_default_isa, opcode, operand, &valbuf))
- return TRUE;
- return FALSE;
+ return true;
+ return false;
}
/* Assumes: All immeds are constants. Check that all constants fit
into their immeds; return FALSE if not. */
-static bfd_boolean
+static bool
xg_immeds_fit (const TInsn *insn)
{
xtensa_isa isa = xtensa_default_isa;
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
- const expressionS *expr = &insn->tok[i];
+ const expressionS *exp = &insn->tok[i];
+
if (xtensa_operand_is_register (isa, insn->opcode, i) == 1)
continue;
- switch (expr->X_op)
+ switch (exp->X_op)
{
case O_register:
case O_constant:
- if (xg_check_operand (expr->X_add_number, insn->opcode, i))
- return FALSE;
+ if (xg_check_operand (exp->X_add_number, insn->opcode, i))
+ return false;
break;
default:
/* The symbol should have a fixup associated with it. */
- assert (FALSE);
+ gas_assert (false);
break;
}
}
- return TRUE;
+ return true;
}
/* This should only be called after we have an initial
estimate of the addresses. */
-static bfd_boolean
+static bool
xg_symbolic_immeds_fit (const TInsn *insn,
segT pc_seg,
fragS *pc_frag,
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
- const expressionS *expr = &insn->tok[i];
+ const expressionS *exp = &insn->tok[i];
+
if (xtensa_operand_is_register (isa, insn->opcode, i) == 1)
continue;
- switch (expr->X_op)
+ switch (exp->X_op)
{
case O_register:
case O_constant:
- if (xg_check_operand (expr->X_add_number, insn->opcode, i))
- return FALSE;
+ if (xg_check_operand (exp->X_add_number, insn->opcode, i))
+ return false;
break;
case O_lo16:
case O_hi16:
/* Check for the worst case. */
if (xg_check_operand (0xffff, insn->opcode, i))
- return FALSE;
+ return false;
break;
case O_symbol:
If pc_frag == 0, then we don't have frag locations yet. */
if (pc_frag == 0
|| xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 0)
- return FALSE;
+ return false;
/* If it is a weak symbol or a symbol in a different section,
it cannot be known to fit at assembly time. */
- if (S_IS_WEAK (expr->X_add_symbol)
- || S_GET_SEGMENT (expr->X_add_symbol) != pc_seg)
+ if (S_IS_WEAK (exp->X_add_symbol)
+ || S_GET_SEGMENT (exp->X_add_symbol) != pc_seg)
{
/* For a direct call with --no-longcalls, be optimistic and
assume it will be in range. If the symbol is weak and
symbols even if longcalls is not enabled. */
if (is_direct_call_opcode (insn->opcode)
&& ! pc_frag->tc_frag_data.use_longcalls
- && (! S_IS_WEAK (expr->X_add_symbol)
- || S_IS_DEFINED (expr->X_add_symbol)))
- return TRUE;
+ && (! S_IS_WEAK (exp->X_add_symbol)
+ || S_IS_DEFINED (exp->X_add_symbol)))
+ return true;
- return FALSE;
+ return false;
}
- symbolP = expr->X_add_symbol;
+ symbolP = exp->X_add_symbol;
sym_frag = symbol_get_frag (symbolP);
- target = S_GET_VALUE (symbolP) + expr->X_add_number;
+ target = S_GET_VALUE (symbolP) + exp->X_add_number;
pc = pc_frag->fr_address + pc_offset;
/* If frag has yet to be reached on this pass, assume it
new_offset = target;
xtensa_operand_do_reloc (isa, insn->opcode, i, &new_offset, pc);
if (xg_check_operand (new_offset, insn->opcode, i))
- return FALSE;
+ return false;
break;
default:
/* The symbol should have a fixup associated with it. */
- return FALSE;
+ return false;
}
}
- return TRUE;
+ return true;
}
/* Return TRUE on success. */
-static bfd_boolean
+static bool
xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi)
{
BuildOp *op;
op = bi->ops;
targ->opcode = bi->opcode;
targ->insn_type = ITYPE_INSN;
- targ->is_specific_opcode = FALSE;
+ targ->is_specific_opcode = false;
for (; op != NULL; op = op->next)
{
int op_num = op->op_num;
int op_data = op->op_data;
- assert (op->op_num < MAX_INSN_ARGS);
+ gas_assert (op->op_num < MAX_INSN_ARGS);
if (targ->ntok <= op_num)
targ->ntok = op_num + 1;
set_expr_const (&targ->tok[op_num], op_data);
break;
case OP_OPERAND:
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
copy_expr (&targ->tok[op_num], &insn->tok[op_data]);
break;
+ case OP_FREEREG:
+ if (insn->extra_arg.X_op != O_register)
+ return false;
+ copy_expr (&targ->tok[op_num], &insn->extra_arg);
+ break;
case OP_LITERAL:
sym = get_special_literal_symbol ();
set_expr_symbol_offset (&targ->tok[op_num], sym, 0);
+ if (insn->tok[op_data].X_op == O_tlsfunc
+ || insn->tok[op_data].X_op == O_tlsarg)
+ copy_expr (&targ->extra_arg, &insn->tok[op_data]);
break;
case OP_LABEL:
sym = get_special_label_symbol ();
break;
case OP_OPERAND_HI16U:
case OP_OPERAND_LOW16U:
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
if (expr_is_const (&insn->tok[op_data]))
{
long val;
/* For const16 we can create relocations for these. */
if (targ->opcode == XTENSA_UNDEFINED
|| (targ->opcode != xtensa_const16_opcode))
- return FALSE;
- assert (op_data < insn->ntok);
+ return false;
+ gas_assert (op_data < insn->ntok);
/* Need to build a O_lo16 or O_hi16. */
copy_expr (&targ->tok[op_num], &insn->tok[op_data]);
if (targ->tok[op_num].X_op == O_symbol)
else if (op->typ == OP_OPERAND_LOW16U)
targ->tok[op_num].X_op = O_lo16;
else
- return FALSE;
+ return false;
}
}
break;
OP_OPERAND_F32MINUS */
if (xg_has_userdef_op_fn (op->typ))
{
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
if (expr_is_const (&insn->tok[op_data]))
{
long val;
targ->tok[op_num].X_add_number = val;
}
else
- return FALSE; /* We cannot use a relocation for this. */
+ return false; /* We cannot use a relocation for this. */
break;
}
- assert (0);
+ gas_assert (0);
break;
}
}
op = bi->ops;
targ->opcode = XTENSA_UNDEFINED;
targ->insn_type = ITYPE_LITERAL;
- targ->is_specific_opcode = FALSE;
+ targ->is_specific_opcode = false;
for (; op != NULL; op = op->next)
{
int op_num = op->op_num;
int op_data = op->op_data;
- assert (op->op_num < MAX_INSN_ARGS);
+ gas_assert (op->op_num < MAX_INSN_ARGS);
if (targ->ntok <= op_num)
targ->ntok = op_num + 1;
switch (op->typ)
{
case OP_OPERAND:
- assert (op_data < insn->ntok);
+ gas_assert (op_data < insn->ntok);
/* We can only pass resolvable literals through. */
if (!xg_valid_literal_expression (&insn->tok[op_data]))
- return FALSE;
+ return false;
copy_expr (&targ->tok[op_num], &insn->tok[op_data]);
break;
case OP_LITERAL:
case OP_CONSTANT:
case OP_LABEL:
default:
- assert (0);
+ gas_assert (0);
break;
}
}
op = bi->ops;
targ->opcode = XTENSA_UNDEFINED;
targ->insn_type = ITYPE_LABEL;
- targ->is_specific_opcode = FALSE;
+ targ->is_specific_opcode = false;
/* Literal with no ops is a label? */
- assert (op == NULL);
+ gas_assert (op == NULL);
break;
default:
- assert (0);
+ gas_assert (0);
}
- return TRUE;
+ return true;
}
/* Return TRUE on success. */
-static bfd_boolean
+static bool
xg_build_to_stack (IStack *istack, TInsn *insn, BuildInstr *bi)
{
for (; bi != NULL; bi = bi->next)
TInsn *next_insn = istack_push_space (istack);
if (!xg_build_to_insn (next_insn, insn, bi))
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
/* Return TRUE on valid expansion. */
-static bfd_boolean
+static bool
xg_expand_to_stack (IStack *istack, TInsn *insn, int lateral_steps)
{
int stack_size = istack->ninsn;
TransitionTable *table = xg_build_widen_table (&transition_rule_cmp);
TransitionList *l;
- assert (insn->insn_type == ITYPE_INSN);
- assert (insn->opcode < table->num_opcodes);
+ gas_assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->opcode < table->num_opcodes);
for (l = table->table[insn->opcode]; l != NULL; l = l->next)
{
/* This is it. Expand the rule to the stack. */
if (!xg_build_to_stack (istack, insn, rule->to_instr))
- return FALSE;
+ return false;
/* Check to see if it fits. */
for (i = stack_size; i < istack->ninsn; i++)
{
- TInsn *insn = &istack->insn[i];
+ TInsn *tinsn = &istack->insn[i];
- if (insn->insn_type == ITYPE_INSN
- && !tinsn_has_symbolic_operands (insn)
- && !xg_immeds_fit (insn))
+ if (tinsn->insn_type == ITYPE_INSN
+ && !tinsn_has_symbolic_operands (tinsn)
+ && !xg_immeds_fit (tinsn))
{
istack->ninsn = stack_size;
- return FALSE;
+ return false;
}
}
- return TRUE;
+ return true;
}
steps_taken++;
}
}
- return FALSE;
+ return false;
}
\f
current_insn = *insn;
/* Walk through all of the single instruction expansions. */
- while (xg_is_single_relaxable_insn (¤t_insn, &single_target, FALSE))
+ while (xg_is_single_relaxable_insn (¤t_insn, &single_target, false))
{
steps_taken++;
if (xg_symbolic_immeds_fit (&single_target, pc_seg, pc_frag, pc_offset,
enum xtensa_relax_statesE frag_state,
enum xtensa_relax_statesE slot0_state,
int max_growth,
- bfd_boolean is_insn)
+ bool is_insn)
{
/* Finish off this fragment so that it has at LEAST the desired
max_growth. If it doesn't fit in this fragment, close this one
frag_now->fr_opcode = last_insn;
if (is_insn)
- frag_now->tc_frag_data.is_insn = TRUE;
+ frag_now->tc_frag_data.is_insn = true;
frag_var (rs_machine_dependent, max_growth, max_growth,
frag_state, frag_now->fr_symbol, frag_now->fr_offset, last_insn);
xtensa_set_frag_assembly_state (frag_now);
/* Just to make sure that we did not split it up. */
- assert (old_frag->fr_next == frag_now);
+ gas_assert (old_frag->fr_next == frag_now);
}
/* Return TRUE if the target frag is one of the next non-empty frags. */
-static bfd_boolean
+static bool
is_next_frag_target (const fragS *fragP, const fragS *target)
{
if (fragP == NULL)
- return FALSE;
+ return false;
for (; fragP; fragP = fragP->fr_next)
{
if (fragP == target)
- return TRUE;
+ return true;
if (fragP->fr_fix != 0)
- return FALSE;
+ return false;
if (fragP->fr_type == rs_fill && fragP->fr_offset != 0)
- return FALSE;
+ return false;
if ((fragP->fr_type == rs_align || fragP->fr_type == rs_align_code)
&& ((fragP->fr_address % (1 << fragP->fr_offset)) != 0))
- return FALSE;
+ return false;
if (fragP->fr_type == rs_space)
- return FALSE;
+ return false;
}
- return FALSE;
+ return false;
}
-static bfd_boolean
+static bool
is_branch_jmp_to_next (TInsn *insn, fragS *fragP)
{
xtensa_isa isa = xtensa_default_isa;
if (xtensa_opcode_is_branch (isa, insn->opcode) != 1
&& xtensa_opcode_is_jump (isa, insn->opcode) != 1)
- return FALSE;
+ return false;
for (i = 0; i < num_ops; i++)
{
}
}
if (target_op == -1)
- return FALSE;
+ return false;
if (insn->ntok <= target_op)
- return FALSE;
+ return false;
if (insn->tok[target_op].X_op != O_symbol)
- return FALSE;
+ return false;
sym = insn->tok[target_op].X_add_symbol;
if (sym == NULL)
- return FALSE;
+ return false;
if (insn->tok[target_op].X_add_number != 0)
- return FALSE;
+ return false;
target_frag = symbol_get_frag (sym);
if (target_frag == NULL)
- return FALSE;
+ return false;
if (is_next_frag_target (fragP->fr_next, target_frag)
&& S_GET_VALUE (sym) == target_frag->fr_address)
- return TRUE;
+ return true;
- return FALSE;
+ return false;
}
int i = 1;
if (xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 1
&& insn->tok[i].X_op == O_symbol)
- symbol_get_tc (insn->tok[i].X_add_symbol)->is_loop_target = TRUE;
+ symbol_get_tc (insn->tok[i].X_add_symbol)->is_loop_target = true;
return;
}
&& insn->tok[i].X_op == O_symbol)
{
symbolS *sym = insn->tok[i].X_add_symbol;
- symbol_get_tc (sym)->is_branch_target = TRUE;
+ symbol_get_tc (sym)->is_branch_target = true;
if (S_IS_DEFINED (sym))
- symbol_get_frag (sym)->tc_frag_data.is_branch_target = TRUE;
+ symbol_get_frag (sym)->tc_frag_data.is_branch_target = true;
}
}
}
/* Return FALSE if no error. */
-static bfd_boolean
+static bool
xg_build_token_insn (BuildInstr *instr_spec, TInsn *old_insn, TInsn *new_insn)
{
int num_ops = 0;
case INSTR_LABEL_DEF:
abort ();
}
- new_insn->is_specific_opcode = FALSE;
+ new_insn->is_specific_opcode = false;
new_insn->debug_line = old_insn->debug_line;
new_insn->loc_directive_seen = old_insn->loc_directive_seen;
{
case OP_CONSTANT:
/* The expression must be the constant. */
- assert (b_op->op_num < MAX_INSN_ARGS);
+ gas_assert (b_op->op_num < MAX_INSN_ARGS);
exp = &new_insn->tok[b_op->op_num];
set_expr_const (exp, b_op->op_data);
break;
case OP_OPERAND:
- assert (b_op->op_num < MAX_INSN_ARGS);
- assert (b_op->op_data < (unsigned) old_insn->ntok);
+ gas_assert (b_op->op_num < MAX_INSN_ARGS);
+ gas_assert (b_op->op_data < (unsigned) old_insn->ntok);
src_exp = &old_insn->tok[b_op->op_data];
exp = &new_insn->tok[b_op->op_num];
copy_expr (exp, src_exp);
case OP_LITERAL:
case OP_LABEL:
as_bad (_("can't handle generation of literal/labels yet"));
- assert (0);
+ gas_assert (0);
default:
as_bad (_("can't handle undefined OP TYPE"));
- assert (0);
+ gas_assert (0);
}
}
new_insn->ntok = num_ops;
- return FALSE;
+ return false;
}
/* Return TRUE if it was simplified. */
-static bfd_boolean
+static bool
xg_simplify_insn (TInsn *old_insn, TInsn *new_insn)
{
TransitionRule *rule;
BuildInstr *insn_spec;
if (old_insn->is_specific_opcode || !density_supported)
- return FALSE;
+ return false;
rule = xg_instruction_match (old_insn);
if (rule == NULL)
- return FALSE;
+ return false;
insn_spec = rule->to_instr;
/* There should only be one. */
- assert (insn_spec != NULL);
- assert (insn_spec->next == NULL);
+ gas_assert (insn_spec != NULL);
+ gas_assert (insn_spec->next == NULL);
if (insn_spec->next != NULL)
- return FALSE;
+ return false;
xg_build_token_insn (insn_spec, old_insn, new_insn);
- return TRUE;
+ return true;
}
tokens into the stack or relax it and place multiple
instructions/literals onto the stack. Return FALSE if no error. */
-static bfd_boolean
+static bool
xg_expand_assembly_insn (IStack *istack, TInsn *orig_insn)
{
int noperands;
TInsn new_insn;
- bfd_boolean do_expand;
+ bool do_expand;
tinsn_init (&new_insn);
orig_insn->opcode);
if (orig_insn->ntok < noperands)
{
- as_bad (_("found %d operands for '%s': Expected %d"),
+ as_bad (ngettext ("found %d operand for '%s': Expected %d",
+ "found %d operands for '%s': Expected %d",
+ orig_insn->ntok),
orig_insn->ntok,
xtensa_opcode_name (xtensa_default_isa, orig_insn->opcode),
noperands);
- return TRUE;
+ return true;
}
if (orig_insn->ntok > noperands)
- as_warn (_("found too many (%d) operands for '%s': Expected %d"),
+ as_warn (ngettext ("found %d operand for '%s': Expected %d",
+ "found %d operands for '%s': Expected %d",
+ orig_insn->ntok),
orig_insn->ntok,
xtensa_opcode_name (xtensa_default_isa, orig_insn->opcode),
noperands);
orig_insn->ntok = noperands;
if (tinsn_has_invalid_symbolic_operands (orig_insn))
- return TRUE;
+ return true;
/* Special case for extui opcode which has constraints not handled
by the ordinary operand encoding checks. The number of operands
if (shiftimm + maskimm > 32)
{
as_bad (_("immediate operands sum to greater than 32"));
- return TRUE;
+ return true;
}
}
so that the assembly scheduler will keep the L32R/CALLX instructions
adjacent. */
if (is_direct_call_opcode (orig_insn->opcode))
- do_expand = FALSE;
+ do_expand = false;
if (tinsn_has_symbolic_operands (orig_insn))
{
now if an operand is "complex" (e.g., difference of symbols) and
will have to be stored as a literal regardless of the value. */
if (!tinsn_has_complex_operands (orig_insn))
- do_expand = FALSE;
+ do_expand = false;
}
else if (xg_immeds_fit (orig_insn))
- do_expand = FALSE;
+ do_expand = false;
if (do_expand)
xg_assembly_relax (istack, orig_insn, 0, 0, 0, 0, 0);
else
istack_push (istack, orig_insn);
- return FALSE;
+ return false;
}
static int linkonce_len = sizeof (".gnu.linkonce.") - 1;
-static bfd_boolean
+static bool
get_is_linkonce_section (bfd *abfd ATTRIBUTE_UNUSED, segT sec)
{
flagword flags, link_once_flags;
- flags = bfd_get_section_flags (abfd, sec);
+ flags = bfd_section_flags (sec);
link_once_flags = (flags & SEC_LINK_ONCE);
/* Flags might not be set yet. */
{
sym_list *l;
- l = (sym_list *) xmalloc (sizeof (sym_list));
+ l = XNEW (sym_list);
l->sym = sym;
l->next = literal_syms;
literal_syms = l;
symbol will be in the output file. */
if (get_is_linkonce_section (stdoutput, sec))
{
- symbolP = symbol_new (name, sec, 0, frag);
+ symbolP = symbol_new (name, sec, frag, 0);
S_CLEAR_EXTERNAL (symbolP);
/* symbolP->local = 1; */
}
else
- symbolP = symbol_new (name, sec, 0, frag);
+ symbolP = symbol_new (name, sec, frag, 0);
xtensa_add_literal_sym (symbolP);
emit_state state;
symbolS *lit_sym = NULL;
bfd_reloc_code_real_type reloc;
- bfd_boolean pcrel = FALSE;
+ bool pcrel = false;
char *p;
/* size = 4 for L32R. It could easily be larger when we move to
set_expr_symbol_offset (&saved_loc, frag_now->fr_symbol, frag_now_fix ());
- assert (insn->insn_type == ITYPE_LITERAL);
- assert (insn->ntok == 1); /* must be only one token here */
+ gas_assert (insn->insn_type == ITYPE_LITERAL);
+ gas_assert (insn->ntok == 1); /* must be only one token here */
xtensa_switch_to_literal_fragment (&state);
switch (emit_val->X_op)
{
case O_pcrel:
- pcrel = TRUE;
+ pcrel = true;
/* fall through */
case O_pltrel:
+ case O_tlsfunc:
+ case O_tlsarg:
+ case O_tpoff:
+ case O_dtpoff:
p = frag_more (litsize);
xtensa_set_frag_assembly_state (frag_now);
- reloc = map_operator_to_reloc (emit_val->X_op);
+ reloc = map_operator_to_reloc (emit_val->X_op, true);
if (emit_val->X_add_symbol)
emit_val->X_op = O_symbol;
else
break;
}
- assert (frag_now->tc_frag_data.literal_frag == NULL);
+ gas_assert (frag_now->tc_frag_data.literal_frag == NULL);
frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg);
frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now);
lit_sym = frag_now->fr_symbol;
offsetT litalign = 2; /* 2^2 = 4 */
fragS *lit_saved_frag;
- assert (size % 4 == 0);
+ gas_assert (size % 4 == 0);
xtensa_switch_to_literal_fragment (&state);
lit_saved_frag = frag_now;
frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg);
frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now);
- xg_finish_frag (0, RELAX_LITERAL, 0, size, FALSE);
+ xg_finish_frag (0, RELAX_LITERAL, 0, size, false);
/* Go back. */
xtensa_restore_emit_state (&state);
/* Put in a fixup record based on the opcode.
Return TRUE on success. */
-static bfd_boolean
+static bool
xg_add_opcode_fix (TInsn *tinsn,
int opnum,
xtensa_format fmt,
int slot,
- expressionS *expr,
+ expressionS *exp,
fragS *fragP,
offsetT offset)
{
}
else if (opcode == xtensa_const16_opcode)
{
- if (expr->X_op == O_lo16)
+ if (exp->X_op == O_lo16)
{
reloc = encode_reloc (slot);
- expr->X_op = O_symbol;
+ exp->X_op = O_symbol;
}
- else if (expr->X_op == O_hi16)
+ else if (exp->X_op == O_hi16)
{
reloc = encode_alt_reloc (slot);
- expr->X_op = O_symbol;
+ exp->X_op = O_symbol;
}
}
{
as_bad (_("invalid relocation for operand %i of '%s'"),
opnum + 1, xtensa_opcode_name (xtensa_default_isa, opcode));
- return FALSE;
+ return false;
}
/* Handle erroneous "@h" and "@l" expressions here before they propagate
into the symbol table where the generic portions of the assembler
won't know what to do with them. */
- if (expr->X_op == O_lo16 || expr->X_op == O_hi16)
+ if (exp->X_op == O_lo16 || exp->X_op == O_hi16)
{
as_bad (_("invalid expression for operand %i of '%s'"),
opnum + 1, xtensa_opcode_name (xtensa_default_isa, opcode));
- return FALSE;
+ return false;
}
/* Next try the generic relocs. */
if (reloc == BFD_RELOC_NONE)
{
as_bad (_("invalid relocation in instruction slot %i"), slot);
- return FALSE;
+ return false;
}
howto = bfd_reloc_type_lookup (stdoutput, reloc);
{
as_bad (_("undefined symbol for opcode \"%s\""),
xtensa_opcode_name (xtensa_default_isa, opcode));
- return FALSE;
+ return false;
}
fmt_length = xtensa_format_length (xtensa_default_isa, fmt);
- the_fix = fix_new_exp (fragP, offset, fmt_length, expr,
+ the_fix = fix_new_exp (fragP, offset, fmt_length, exp,
howto->pc_relative, reloc);
the_fix->fx_no_overflow = 1;
- the_fix->tc_fix_data.X_add_symbol = expr->X_add_symbol;
- the_fix->tc_fix_data.X_add_number = expr->X_add_number;
+ the_fix->tc_fix_data.X_add_symbol = exp->X_add_symbol;
+ the_fix->tc_fix_data.X_add_number = exp->X_add_number;
the_fix->tc_fix_data.slot = slot;
- return TRUE;
+ return true;
}
-static bfd_boolean
+static bool
xg_emit_insn_to_buf (TInsn *tinsn,
char *buf,
fragS *fragP,
offsetT offset,
- bfd_boolean build_fix)
+ bool build_fix)
{
static xtensa_insnbuf insnbuf = NULL;
- bfd_boolean has_symbolic_immed = FALSE;
- bfd_boolean ok = TRUE;
+ bool has_symbolic_immed = false;
+ bool ok = true;
if (!insnbuf)
insnbuf = xtensa_insnbuf_alloc (xtensa_default_isa);
expressionS *exp = &tinsn->tok[opnum];
if (!xg_add_opcode_fix (tinsn, opnum, fmt, slot, exp, fragP, offset))
- ok = FALSE;
+ ok = false;
}
- fragP->tc_frag_data.is_insn = TRUE;
+ fragP->tc_frag_data.is_insn = true;
xtensa_insnbuf_to_chars (xtensa_default_isa, insnbuf,
(unsigned char *) buf, 0);
return ok;
int i;
if (lit_sym == 0)
return;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < insn->ntok; i++)
if (insn->tok[i].X_add_symbol == sym)
insn->tok[i].X_add_symbol = lit_sym;
/* Return TRUE if the instruction can write to the specified
integer register. */
-static bfd_boolean
+static bool
is_register_writer (const TInsn *insn, const char *regset, int regnum)
{
int i;
{
if ((insn->tok[i].X_op == O_register)
&& (insn->tok[i].X_add_number == regnum))
- return TRUE;
+ return true;
}
}
}
- return FALSE;
+ return false;
}
-static bfd_boolean
+static bool
is_bad_loopend_opcode (const TInsn *tinsn)
{
xtensa_opcode opcode = tinsn->opcode;
if (opcode == XTENSA_UNDEFINED)
- return FALSE;
+ return false;
if (opcode == xtensa_call0_opcode
|| opcode == xtensa_callx0_opcode
|| opcode == xtensa_retw_n_opcode
|| opcode == xtensa_waiti_opcode
|| opcode == xtensa_rsr_lcount_opcode)
- return TRUE;
+ return true;
- return FALSE;
+ return false;
}
Also, the assembler generates stabs labels that need
not be aligned: FAKE_LABEL_NAME . {"F", "L", "endfunc"}. */
-static bfd_boolean
+static bool
is_unaligned_label (symbolS *sym)
{
const char *name = S_GET_NAME (sym);
if (name
&& name[0] == '.'
&& name[1] == 'L' && (name[2] == 'n' || name[2] == 'M'))
- return TRUE;
+ return true;
/* FAKE_LABEL_NAME followed by "F", "L" or "endfunc" */
if (fake_size == 0)
&& (name[fake_size] == 'F'
|| name[fake_size] == 'L'
|| (name[fake_size] == 'e'
- && strncmp ("endfunc", name+fake_size, 7) == 0)))
- return TRUE;
+ && startswith (name + fake_size, "endfunc"))))
+ return true;
- return FALSE;
+ return false;
}
}
-static bfd_boolean
+static bool
next_frag_opcode_is_loop (const fragS *fragP, xtensa_opcode *opcode)
{
xtensa_opcode out_opcode;
const fragS *next_fragP = next_non_empty_frag (fragP);
if (next_fragP == NULL)
- return FALSE;
+ return false;
out_opcode = get_opcode_from_buf (next_fragP->fr_literal, 0);
if (xtensa_opcode_is_loop (xtensa_default_isa, out_opcode) == 1)
{
*opcode = out_opcode;
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
be accompanied by major changes to make use of that data.
In any event, we can tell that we are expanding from a single-slot
- three-byte format to a wider one with the logic below. */
+ format to a wider one with the logic below. */
- if (fmt_size <= 3 && fragP->tc_frag_data.text_expansion[0] != 3)
- return 3 + fragP->tc_frag_data.text_expansion[0];
- else
- return 3;
+ int i;
+ int relaxed_size = fmt_size + fragP->tc_frag_data.text_expansion[0];
+
+ for (i = 0; i < xtensa_isa_num_formats (isa); i++)
+ {
+ if (relaxed_size == xtensa_format_length (isa, i))
+ return relaxed_size;
+ }
+
+ return 3;
}
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
|| next_fragP->fr_subtype == RELAX_UNREACHABLE)))
next_fragP = next_fragP->fr_next;
- assert (next_fragP->fr_type == rs_machine_dependent
+ gas_assert (next_fragP->fr_type == rs_machine_dependent
&& (next_fragP->fr_subtype == RELAX_MAYBE_UNREACHABLE
|| next_fragP->fr_subtype == RELAX_UNREACHABLE));
|| new_target->fr_subtype == RELAX_DESIRE_ALIGN)))
new_target = new_target->fr_next;
- assert (new_target->fr_type == rs_machine_dependent
+ gas_assert (new_target->fr_type == rs_machine_dependent
&& (new_target->fr_subtype == RELAX_MAYBE_DESIRE_ALIGN
|| new_target->fr_subtype == RELAX_DESIRE_ALIGN));
}
}
-static bfd_boolean
+static bool
next_frag_is_branch_target (const fragS *fragP)
{
/* Sometimes an empty will end up here due to storage allocation issues,
for (fragP = fragP->fr_next; fragP; fragP = fragP->fr_next)
{
if (fragP->tc_frag_data.is_branch_target)
- return TRUE;
+ return true;
if (fragP->fr_fix != 0)
break;
}
- return FALSE;
+ return false;
}
-static bfd_boolean
+static bool
next_frag_is_loop_target (const fragS *fragP)
{
/* Sometimes an empty will end up here due storage allocation issues.
for (fragP = fragP->fr_next; fragP; fragP = fragP->fr_next)
{
if (fragP->tc_frag_data.is_loop_target)
- return TRUE;
+ return true;
if (fragP->fr_fix != 0)
break;
}
- return FALSE;
+ return false;
}
+/* As specified in the relaxation table, when a loop instruction is
+ relaxed, there are 24 bytes between the loop instruction itself and
+ the first instruction in the loop. */
+
+#define RELAXED_LOOP_INSN_BYTES 24
+
static addressT
next_frag_pre_opcode_bytes (const fragS *fragp)
{
been relaxed. Note that we can assume that the LOOP
instruction is in slot 0 because loops aren't bundleable. */
if (next_fragp->tc_frag_data.slot_subtypes[0] > RELAX_IMMED)
- return get_expanded_loop_offset (next_opcode);
+ return get_expanded_loop_offset (next_opcode) + RELAXED_LOOP_INSN_BYTES;
return 0;
}
{
/* Any labels pointing to the current location need
to be adjusted to after the literal pool. */
- emit_state s;
fragS *pool_location;
if (use_literal_section)
pool_location = frag_now;
frag_now->tc_frag_data.lit_frchain = frchain_now;
frag_now->tc_frag_data.literal_frag = frag_now;
+ /* Just record this frag. */
+ xtensa_maybe_create_literal_pool_frag (false, false);
frag_variant (rs_machine_dependent, 0, 0,
RELAX_LITERAL_POOL_BEGIN, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
RELAX_LITERAL_POOL_END, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
- /* Now put a frag into the literal pool that points to this location. */
set_literal_pool_location (now_seg, pool_location);
- xtensa_switch_to_non_abs_literal_fragment (&s);
- frag_align (2, 0, 0);
- record_alignment (now_seg, 2);
-
- /* Close whatever frag is there. */
- frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL);
- xtensa_set_frag_assembly_state (frag_now);
- frag_now->tc_frag_data.literal_frag = pool_location;
- frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL);
- xtensa_restore_emit_state (&s);
- xtensa_set_frag_assembly_state (frag_now);
}
else
tinsn->opcode = xtensa_nop_opcode;
- assert (tinsn->opcode != XTENSA_UNDEFINED);
+ gas_assert (tinsn->opcode != XTENSA_UNDEFINED);
}
}
/* This is the OFFSET of the loop instruction in the expanded loop.
This MUST correspond directly to the specification of the loop
expansion. It will be validated on fragment conversion. */
- assert (opcode != XTENSA_UNDEFINED);
+ gas_assert (opcode != XTENSA_UNDEFINED);
if (opcode == xtensa_loop_opcode)
return 0;
if (opcode == xtensa_loopnez_opcode)
static fragS *
get_literal_pool_location (segT seg)
{
+ if (auto_litpools)
+ {
+ struct litpool_seg *lps = litpool_seg_list.next;
+ struct litpool_frag *lpf;
+ for ( ; lps && lps->seg->id != seg->id; lps = lps->next)
+ ;
+ if (lps)
+ {
+ for (lpf = lps->frag_list.prev; lpf->fragP; lpf = lpf->prev)
+ { /* Skip "candidates" for now. */
+ if (lpf->fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN &&
+ lpf->priority == 1)
+ return lpf->fragP;
+ }
+ /* Must convert a lower-priority pool. */
+ for (lpf = lps->frag_list.prev; lpf->fragP; lpf = lpf->prev)
+ {
+ if (lpf->fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN)
+ return lpf->fragP;
+ }
+ /* Still no match -- try for a low priority pool. */
+ for (lpf = lps->frag_list.prev; lpf->fragP; lpf = lpf->prev)
+ {
+ if (lpf->fragP->fr_subtype == RELAX_LITERAL_POOL_CANDIDATE_BEGIN)
+ return lpf->fragP;
+ }
+ }
+ }
return seg_info (seg)->tc_segment_info_data.literal_pool_loc;
}
xtensa_set_frag_assembly_state (fragS *fragP)
{
if (!density_supported)
- fragP->tc_frag_data.is_no_density = TRUE;
+ fragP->tc_frag_data.is_no_density = true;
/* This function is called from subsegs_finish, which is called
after xtensa_end, so we can't use "use_transform" or
"use_schedule" here. */
if (!directive_state[directive_transform])
- fragP->tc_frag_data.is_no_transform = TRUE;
+ fragP->tc_frag_data.is_no_transform = true;
if (directive_state[directive_longcalls])
- fragP->tc_frag_data.use_longcalls = TRUE;
+ fragP->tc_frag_data.use_longcalls = true;
fragP->tc_frag_data.use_absolute_literals =
directive_state[directive_absolute_literals];
- fragP->tc_frag_data.is_assembly_state_set = TRUE;
+ fragP->tc_frag_data.is_assembly_state_set = true;
}
-static bfd_boolean
+static bool
relaxable_section (asection *sec)
{
return ((sec->flags & SEC_DEBUGGING) == 0
segment_info_type *seginfo;
fragS *fragP;
flagword flags;
- flags = bfd_get_section_flags (stdoutput, sec);
+ flags = bfd_section_flags (sec);
if (flags & SEC_DEBUGGING)
continue;
if (!(flags & SEC_ALLOC))
{
while (last_fragP != fragP->fr_next)
{
- last_fragP->tc_frag_data.is_no_transform = TRUE;
+ last_fragP->tc_frag_data.is_no_transform = true;
last_fragP = last_fragP->fr_next;
}
}
segment_info_type *seginfo;
fragS *fragP;
flagword flags;
- flags = bfd_get_section_flags (stdoutput, sec);
+ flags = bfd_section_flags (sec);
if (flags & SEC_DEBUGGING)
continue;
if (!(flags & SEC_ALLOC))
}
else
{
- fragP->tc_frag_data.is_assembly_state_set = TRUE;
+ fragP->tc_frag_data.is_assembly_state_set = true;
fragP->tc_frag_data.is_no_density =
last_fragP->tc_frag_data.is_no_density;
fragP->tc_frag_data.is_no_transform =
asection *sec,
void *unused ATTRIBUTE_UNUSED)
{
- flagword flags = bfd_get_section_flags (abfd, sec);
+ flagword flags = bfd_section_flags (sec);
segment_info_type *seginfo = seg_info (sec);
fragS *frag = seginfo->frchainP->frch_root;
asection *sec,
void *unused ATTRIBUTE_UNUSED)
{
- flagword flags = bfd_get_section_flags (abfd, sec);
+ flagword flags = bfd_section_flags (sec);
segment_info_type *seginfo = seg_info (sec);
fragS *frag = seginfo->frchainP->frch_root;
xtensa_isa isa = xtensa_default_isa;
addressT frag_addr;
xtensa_format fmt;
- xtensa_insnbuf_from_chars
- (isa, insnbuf, (unsigned char *) frag->fr_literal, 0);
- fmt = xtensa_format_decode (isa, insnbuf);
- op_size = xtensa_format_length (isa, fmt);
- frag_addr = frag->fr_address % xtensa_fetch_width;
+ if (frag->fr_fix == 0)
+ frag = next_non_empty_frag (frag);
- if (frag_addr + op_size > xtensa_fetch_width)
- as_warn_where (frag->fr_file, frag->fr_line,
- _("unaligned loop: %d bytes at 0x%lx"),
- op_size, (long) frag->fr_address);
+ if (frag)
+ {
+ xtensa_insnbuf_from_chars
+ (isa, insnbuf, (unsigned char *) frag->fr_literal, 0);
+ fmt = xtensa_format_decode (isa, insnbuf);
+ op_size = xtensa_format_length (isa, fmt);
+ frag_addr = frag->fr_address % xtensa_fetch_width;
+
+ if (frag_addr + op_size > xtensa_fetch_width)
+ as_warn_where (frag->fr_file, frag->fr_line,
+ _("unaligned loop: %d bytes at 0x%lx"),
+ op_size, (long) frag->fr_address);
+ }
}
frag = frag->fr_next;
}
static xtensa_insnbuf slotbuf = NULL;
xtensa_format fmt;
int slot;
- bfd_boolean alt_reloc;
+ bool alt_reloc;
xtensa_opcode opcode;
char *const fixpos = fixP->fx_frag->fr_literal + fixP->fx_where;
number_to_chars_littleendian (buf, val, n);
}
+static void
+xg_init_global_config (void)
+{
+ target_big_endian = XCHAL_HAVE_BE;
+
+ density_supported = XCHAL_HAVE_DENSITY;
+ absolute_literals_supported = XSHAL_USE_ABSOLUTE_LITERALS;
+ xtensa_fetch_width = XCHAL_INST_FETCH_WIDTH;
+
+ directive_state[directive_density] = XCHAL_HAVE_DENSITY;
+ directive_state[directive_absolute_literals] = XSHAL_USE_ABSOLUTE_LITERALS;
+
+ microarch_earliest = XTENSA_MARCH_EARLIEST;
+}
+
+void
+xtensa_init (int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED)
+{
+ xg_init_global_config ();
+}
/* This function is called once, at assembler startup time. It should
set up all the tables, etc. that the MD part of the assembler will
segT current_section = now_seg;
int current_subsec = now_subseg;
xtensa_isa isa;
+ int i;
xtensa_default_isa = xtensa_isa_init (0, 0);
isa = xtensa_default_isa;
- linkrelax = 1;
+ linkrelax = opt_linkrelax;
/* Set up the literal sections. */
memset (&default_lit_sections, 0, sizeof (default_lit_sections));
subseg_set (current_section, current_subsec);
- xg_init_vinsn (&cur_vinsn);
-
xtensa_addi_opcode = xtensa_opcode_lookup (isa, "addi");
xtensa_addmi_opcode = xtensa_opcode_lookup (isa, "addmi");
xtensa_call0_opcode = xtensa_opcode_lookup (isa, "call0");
xtensa_movi_opcode = xtensa_opcode_lookup (isa, "movi");
xtensa_movi_n_opcode = xtensa_opcode_lookup (isa, "movi.n");
xtensa_isync_opcode = xtensa_opcode_lookup (isa, "isync");
+ xtensa_j_opcode = xtensa_opcode_lookup (isa, "j");
xtensa_jx_opcode = xtensa_opcode_lookup (isa, "jx");
xtensa_l32r_opcode = xtensa_opcode_lookup (isa, "l32r");
xtensa_loop_opcode = xtensa_opcode_lookup (isa, "loop");
xtensa_rsr_lcount_opcode = xtensa_opcode_lookup (isa, "rsr.lcount");
xtensa_waiti_opcode = xtensa_opcode_lookup (isa, "waiti");
+ for (i = 0; i < xtensa_isa_num_formats (isa); i++)
+ {
+ int format_slots = xtensa_format_num_slots (isa, i);
+ if (format_slots > config_max_slots)
+ config_max_slots = format_slots;
+ }
+
+ xg_init_vinsn (&cur_vinsn);
+
xtensa_num_pipe_stages = xtensa_isa_num_pipe_stages (isa);
init_op_placement_info_table ();
/* Set up the assembly state. */
if (!frag_now->tc_frag_data.is_assembly_state_set)
xtensa_set_frag_assembly_state (frag_now);
+
+ if (!use_literal_section)
+ xtensa_mark_literal_pool_location ();
}
/* No target aligning in the absolute section. */
if (now_seg != absolute_section
- && do_align_targets ()
&& !is_unaligned_label (sym)
&& !generating_literals)
{
xtensa_set_frag_assembly_state (frag_now);
- frag_var (rs_machine_dependent,
- 0, (int) freq,
- RELAX_DESIRE_ALIGN_IF_TARGET,
- frag_now->fr_symbol, frag_now->fr_offset, NULL);
+ if (do_align_targets ())
+ frag_var (rs_machine_dependent, 0, (int) freq,
+ RELAX_DESIRE_ALIGN_IF_TARGET, frag_now->fr_symbol,
+ frag_now->fr_offset, NULL);
+ else
+ frag_var (rs_fill, 0, 0, frag_now->fr_subtype,
+ frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
xtensa_move_labels (frag_now, 0);
}
forward branch, mark the frag accordingly. Backward branches
are handled by xg_add_branch_and_loop_targets. */
if (symbol_get_tc (sym)->is_branch_target)
- symbol_get_frag (sym)->tc_frag_data.is_branch_target = TRUE;
+ symbol_get_frag (sym)->tc_frag_data.is_branch_target = true;
/* Loops only go forward, so they can be identified here. */
if (symbol_get_tc (sym)->is_loop_target)
- symbol_get_frag (sym)->tc_frag_data.is_loop_target = TRUE;
+ symbol_get_frag (sym)->tc_frag_data.is_loop_target = true;
dwarf2_emit_label (sym);
}
frag_new (0);
xtensa_set_frag_assembly_state (frag_now);
}
- frag_now->tc_frag_data.is_insn = FALSE;
+ frag_now->tc_frag_data.is_insn = false;
xtensa_clear_insn_labels ();
}
xtensa_isa isa = xtensa_default_isa;
char *opname;
unsigned opnamelen;
- bfd_boolean has_underbar = FALSE;
+ bool has_underbar = false;
char *arg_strings[MAX_INSN_ARGS];
int num_args;
TInsn orig_insn; /* Original instruction from the input. */
/* Split off the opcode. */
opnamelen = strspn (str, "abcdefghijklmnopqrstuvwxyz_/0123456789.");
- opname = xmalloc (opnamelen + 1);
- memcpy (opname, str, opnamelen);
- opname[opnamelen] = '\0';
+ opname = xstrndup (str, opnamelen);
num_args = tokenize_arguments (arg_strings, str + opnamelen);
if (num_args == -1)
/* Check for an underbar prefix. */
if (*opname == '_')
{
- has_underbar = TRUE;
+ has_underbar = true;
opname += 1;
}
orig_insn.insn_type = ITYPE_INSN;
orig_insn.ntok = 0;
orig_insn.is_specific_opcode = (has_underbar || !use_transform ());
-
orig_insn.opcode = xtensa_opcode_lookup (isa, opname);
+
+ /* Special case: Check for "CALLXn.TLS" pseudo op. If found, grab its
+ extra argument and set the opcode to "CALLXn". */
+ if (orig_insn.opcode == XTENSA_UNDEFINED
+ && strncasecmp (opname, "callx", 5) == 0)
+ {
+ unsigned long window_size;
+ char *suffix;
+
+ window_size = strtoul (opname + 5, &suffix, 10);
+ if (suffix != opname + 5
+ && (window_size == 0
+ || window_size == 4
+ || window_size == 8
+ || window_size == 12)
+ && strcasecmp (suffix, ".tls") == 0)
+ {
+ switch (window_size)
+ {
+ case 0: orig_insn.opcode = xtensa_callx0_opcode; break;
+ case 4: orig_insn.opcode = xtensa_callx4_opcode; break;
+ case 8: orig_insn.opcode = xtensa_callx8_opcode; break;
+ case 12: orig_insn.opcode = xtensa_callx12_opcode; break;
+ }
+
+ if (num_args != 2)
+ as_bad (_("wrong number of operands for '%s'"), opname);
+ else
+ {
+ bfd_reloc_code_real_type reloc;
+ char *old_input_line_pointer;
+ expressionS *tok = &orig_insn.extra_arg;
+
+ old_input_line_pointer = input_line_pointer;
+ input_line_pointer = arg_strings[num_args - 1];
+
+ expression (tok);
+ if (tok->X_op == O_symbol
+ && ((reloc = xtensa_elf_suffix (&input_line_pointer, tok))
+ == BFD_RELOC_XTENSA_TLS_CALL))
+ tok->X_op = map_suffix_reloc_to_operator (reloc);
+ else
+ as_bad (_("bad relocation expression for '%s'"), opname);
+
+ input_line_pointer = old_input_line_pointer;
+ num_args -= 1;
+ }
+ }
+ }
+
+ /* Special case: Check for "j.l" pseudo op. */
+ if (orig_insn.opcode == XTENSA_UNDEFINED
+ && strncasecmp (opname, "j.l", 3) == 0)
+ {
+ if (num_args != 2)
+ as_bad (_("wrong number of operands for '%s'"), opname);
+ else
+ {
+ char *old_input_line_pointer;
+ expressionS *tok = &orig_insn.extra_arg;
+
+ old_input_line_pointer = input_line_pointer;
+ input_line_pointer = arg_strings[num_args - 1];
+
+ expression_maybe_register (xtensa_jx_opcode, 0, tok);
+ input_line_pointer = old_input_line_pointer;
+
+ num_args -= 1;
+ orig_insn.opcode = xtensa_j_opcode;
+ }
+ }
+
if (orig_insn.opcode == XTENSA_UNDEFINED)
{
xtensa_format fmt = xtensa_format_lookup (isa, opname);
/* We've just emitted a new instruction so clear the list of labels. */
xtensa_clear_insn_labels ();
+
+ xtensa_check_frag_count ();
}
&& ! fragP->tc_frag_data.is_literal
&& (fragP->fr_type == rs_align
|| fragP->fr_type == rs_align_code)
- && fragP->fr_address + fragP->fr_fix > 0
&& fragP->fr_offset > 0
&& now_seg != bss_section)
{
- fragP->tc_frag_data.is_align = TRUE;
+ fragP->tc_frag_data.is_align = true;
fragP->tc_frag_data.alignment = fragP->fr_offset;
}
int slot;
xtensa_isa isa = xtensa_default_isa;
valueT addr = fixP->fx_where + fixP->fx_frag->fr_address;
- bfd_boolean alt_reloc;
+ bool alt_reloc;
if (fixP->fx_r_type == BFD_RELOC_XTENSA_ASM_EXPAND)
return 0;
nearest macro to where the check needs to take place. FIXME: This
seems wrong. */
-bfd_boolean
+bool
xtensa_check_inside_bundle (void)
{
if (cur_vinsn.inside_bundle && input_line_pointer[-1] == '.')
/* This function must always return FALSE because it is called via a
macro that has nothing to do with bundling. */
- return FALSE;
+ return false;
}
/* Set up the assembly state. */
if (!frag_now->tc_frag_data.is_assembly_state_set)
xtensa_set_frag_assembly_state (frag_now);
+
+ if (!use_literal_section
+ && seg_info (now_seg)->tc_segment_info_data.literal_pool_loc == NULL
+ && !xtensa_is_init_fini (now_seg))
+ xtensa_mark_literal_pool_location ();
}
/* tc_fix_adjustable hook */
-bfd_boolean
+bool
xtensa_fix_adjustable (fixS *fixP)
{
- /* An offset is not allowed in combination with the difference of two
- symbols, but that cannot be easily detected after a local symbol
- has been adjusted to a (section+offset) form. Return 0 so that such
- an fix will not be adjusted. */
- if (fixP->fx_subsy && fixP->fx_addsy && fixP->fx_offset
- && relaxable_section (S_GET_SEGMENT (fixP->fx_subsy)))
- return 0;
-
/* We need the symbol name for the VTABLE entries. */
if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
symbolS *expr_symbols = NULL;
-void
+void
xtensa_symbol_new_hook (symbolS *sym)
{
if (is_leb128_expr && S_GET_SEGMENT (sym) == expr_section)
if (fixP->fx_subsy && !(linkrelax && (fixP->fx_r_type == BFD_RELOC_32
|| fixP->fx_r_type == BFD_RELOC_16
|| fixP->fx_r_type == BFD_RELOC_8)))
- as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex"));
+ as_bad_subtract (fixP);
switch (fixP->fx_r_type)
{
case BFD_RELOC_8:
if (fixP->fx_subsy)
{
+ bool neg = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset
+ < S_GET_VALUE (fixP->fx_subsy));
+
switch (fixP->fx_r_type)
{
case BFD_RELOC_8:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF8;
+ fixP->fx_r_type = neg
+ ? BFD_RELOC_XTENSA_NDIFF8 : BFD_RELOC_XTENSA_PDIFF8;
+ fixP->fx_signed = 0;
break;
case BFD_RELOC_16:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF16;
+ fixP->fx_r_type = neg
+ ? BFD_RELOC_XTENSA_NDIFF16 : BFD_RELOC_XTENSA_PDIFF16;
+ fixP->fx_signed = 0;
break;
case BFD_RELOC_32:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF32;
+ fixP->fx_r_type = neg
+ ? BFD_RELOC_XTENSA_NDIFF32 : BFD_RELOC_XTENSA_PDIFF32;
+ fixP->fx_signed = 0;
break;
default:
break;
}
- /* An offset is only allowed when it results from adjusting a
- local symbol into a section-relative offset. If the offset
- came from the original expression, tc_fix_adjustable will have
- prevented the fix from being converted to a section-relative
- form so that we can flag the error here. */
- if (fixP->fx_offset != 0 && !symbol_section_p (fixP->fx_addsy))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("cannot represent subtraction with an offset"));
-
val = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset
- S_GET_VALUE (fixP->fx_subsy));
val = *valP;
fixP->fx_done = 1;
}
+ else if (S_GET_SEGMENT (fixP->fx_addsy) == absolute_section)
+ {
+ val = S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset;
+ *valP = val;
+ fixP->fx_done = 1;
+ }
/* fall through */
case BFD_RELOC_XTENSA_PLT:
fixP->fx_no_overflow = 0; /* Use the standard overflow check. */
break;
+ case BFD_RELOC_XTENSA_TLSDESC_FN:
+ case BFD_RELOC_XTENSA_TLSDESC_ARG:
+ case BFD_RELOC_XTENSA_TLS_TPOFF:
+ case BFD_RELOC_XTENSA_TLS_DTPOFF:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ md_number_to_chars (fixpos, 0, fixP->fx_size);
+ fixP->fx_no_overflow = 0; /* Use the standard overflow check. */
+ break;
+
case BFD_RELOC_XTENSA_SLOT0_OP:
case BFD_RELOC_XTENSA_SLOT1_OP:
case BFD_RELOC_XTENSA_SLOT2_OP:
by the linker, and it makes the object file disassembly
readable when all branch targets are encoded in relocations. */
- assert (fixP->fx_addsy);
+ gas_assert (fixP->fx_addsy);
if (S_GET_SEGMENT (fixP->fx_addsy) == seg
&& !S_FORCE_RELOC (fixP->fx_addsy, 1))
{
break;
case BFD_RELOC_XTENSA_ASM_EXPAND:
+ case BFD_RELOC_XTENSA_TLS_FUNC:
+ case BFD_RELOC_XTENSA_TLS_ARG:
+ case BFD_RELOC_XTENSA_TLS_CALL:
case BFD_RELOC_XTENSA_SLOT0_ALT:
case BFD_RELOC_XTENSA_SLOT1_ALT:
case BFD_RELOC_XTENSA_SLOT2_ALT:
}
-char *
+const char *
md_atof (int type, char *litP, int *sizeP)
{
return ieee_md_atof (type, litP, sizeP, target_big_endian);
{
arelent *reloc;
- reloc = (arelent *) xmalloc (sizeof (arelent));
- reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ reloc = XNEW (arelent);
+ reloc->sym_ptr_ptr = XNEW (asymbol *);
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
/* Make sure none of our internal relocations make it this far.
They'd better have been fully resolved by this point. */
- assert ((int) fixp->fx_r_type > 0);
+ gas_assert ((int) fixp->fx_r_type > 0);
reloc->addend = fixp->fx_offset;
opcode_funcUnit_use_stage_func ousf)
{
int i;
- resource_table *rt = (resource_table *) xmalloc (sizeof (resource_table));
+ resource_table *rt = XNEW (resource_table);
rt->data = data;
rt->cycles = cycles;
rt->allocated_cycles = cycles;
rt->opcode_unit_use = ouuf;
rt->opcode_unit_stage = ousf;
- rt->units = (unsigned char **) xcalloc (cycles, sizeof (unsigned char *));
+ rt->units = XCNEWVEC (unsigned char *, cycles);
for (i = 0; i < cycles; i++)
- rt->units[i] = (unsigned char *) xcalloc (nu, sizeof (unsigned char));
+ rt->units[i] = XCNEWVEC (unsigned char, nu);
return rt;
}
old_cycles = rt->allocated_cycles;
rt->allocated_cycles = cycles;
- rt->units = xrealloc (rt->units,
- rt->allocated_cycles * sizeof (unsigned char *));
+ rt->units = XRESIZEVEC (unsigned char *, rt->units, rt->allocated_cycles);
for (i = 0; i < old_cycles; i++)
- rt->units[i] = xrealloc (rt->units[i],
- rt->num_units * sizeof (unsigned char));
+ rt->units[i] = XRESIZEVEC (unsigned char, rt->units[i], rt->num_units);
for (i = old_cycles; i < cycles; i++)
- rt->units[i] = xcalloc (rt->num_units, sizeof (unsigned char));
+ rt->units[i] = XCNEWVEC (unsigned char, rt->num_units);
}
-bfd_boolean
+bool
resources_available (resource_table *rt, xtensa_opcode opcode, int cycle)
{
int i;
int copies_in_use = rt->units[stage + cycle][unit];
int copies = (rt->unit_num_copies) (rt->data, unit);
if (copies_in_use >= copies)
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
{
xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i);
int stage = (rt->opcode_unit_stage) (rt->data, opcode, i);
- assert (rt->units[stage + cycle][unit] > 0);
+ gas_assert (rt->units[stage + cycle][unit] > 0);
rt->units[stage + cycle][unit]--;
}
}
write the same state, or access the same tieports. That is
checked by check_t1_t2_reads_and_writes. */
-static bfd_boolean
+static bool
resources_conflict (vliw_insn *vinsn)
{
int i;
/* This is the most common case by far. Optimize it. */
if (vinsn->num_slots == 1)
- return FALSE;
+ return false;
if (rt == NULL)
{
for (i = 0; i < vinsn->num_slots; i++)
{
if (!resources_available (rt, vinsn->slots[i].opcode, 0))
- return TRUE;
+ return true;
reserve_resources (rt, vinsn->slots[i].opcode, 0);
}
- return FALSE;
+ return false;
}
\f
/* finish_vinsn, emit_single_op and helper functions. */
-static bfd_boolean find_vinsn_conflicts (vliw_insn *);
+static bool find_vinsn_conflicts (vliw_insn *);
static xtensa_format xg_find_narrowest_format (vliw_insn *);
static void xg_assemble_vliw_tokens (vliw_insn *);
{
IStack slotstack;
int i;
- char *file_name;
- unsigned line;
+ int slots;
if (find_vinsn_conflicts (vinsn))
{
if (vinsn->format == XTENSA_UNDEFINED)
vinsn->format = xg_find_narrowest_format (vinsn);
+ slots = xtensa_format_num_slots (xtensa_default_isa, vinsn->format);
+ if (slots > 1
+ && produce_flix == FLIX_NONE)
+ {
+ as_bad (_("The option \"--no-allow-flix\" prohibits multi-slot flix."));
+ xg_clear_vinsn (vinsn);
+ return;
+ }
+
if (vinsn->format == XTENSA_UNDEFINED)
{
- as_where (&file_name, &line);
- as_bad_where (file_name, line,
- _("couldn't find a valid instruction format"));
+ as_bad (_("couldn't find a valid instruction format"));
fprintf (stderr, _(" ops were: "));
for (i = 0; i < vinsn->num_slots; i++)
fprintf (stderr, _(" %s;"),
return;
}
- if (vinsn->num_slots
- != xtensa_format_num_slots (xtensa_default_isa, vinsn->format))
+ if (vinsn->num_slots != slots)
{
- as_bad (_("format '%s' allows %d slots, but there are %d opcodes"),
+ as_bad (_("mismatch for format '%s': #slots = %d, #opcodes = %d"),
xtensa_format_name (xtensa_default_isa, vinsn->format),
- xtensa_format_num_slots (xtensa_default_isa, vinsn->format),
- vinsn->num_slots);
+ slots, vinsn->num_slots);
xg_clear_vinsn (vinsn);
return;
}
if (resources_conflict (vinsn))
{
- as_where (&file_name, &line);
- as_bad_where (file_name, line, _("illegal resource usage in bundle"));
+ as_bad (_("illegal resource usage in bundle"));
fprintf (stderr, " ops were: ");
for (i = 0; i < vinsn->num_slots; i++)
fprintf (stderr, " %s;",
{
symbolS *lit_sym = NULL;
int j;
- bfd_boolean e = FALSE;
- bfd_boolean saved_density = density_supported;
+ bool e = false;
+ bool saved_density = density_supported;
/* We don't want to narrow ops inside multi-slot bundles. */
if (vinsn->num_slots > 1)
- density_supported = FALSE;
+ density_supported = false;
istack_init (&slotstack);
if (vinsn->slots[i].opcode == xtensa_nop_opcode)
if (xg_expand_assembly_insn (&slotstack, &vinsn->slots[i]))
{
- e = TRUE;
+ e = true;
continue;
}
TInsn *insn = &slotstack.insn[j];
if (insn->insn_type == ITYPE_LITERAL)
{
- assert (lit_sym == NULL);
+ gas_assert (lit_sym == NULL);
lit_sym = xg_assemble_literal (insn);
}
else
{
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
if (lit_sym)
xg_resolve_literals (insn, lit_sym);
if (j != slotstack.ninsn - 1)
/* Now check resource conflicts on the modified bundle. */
if (resources_conflict (vinsn))
{
- as_where (&file_name, &line);
- as_bad_where (file_name, line, _("illegal resource usage in bundle"));
+ as_bad (_("illegal resource usage in bundle"));
fprintf (stderr, " ops were: ");
for (i = 0; i < vinsn->num_slots; i++)
fprintf (stderr, " %s;",
xg_assemble_vliw_tokens (vinsn);
xg_clear_vinsn (vinsn);
+
+ xtensa_check_frag_count ();
}
static char check_t1_t2_reads_and_writes (TInsn *, TInsn *);
-static bfd_boolean
+static bool
find_vinsn_conflicts (vliw_insn *vinsn)
{
int i, j;
int branches = 0;
xtensa_isa isa = xtensa_default_isa;
- assert (!past_xtensa_end);
+ gas_assert (!past_xtensa_end);
for (i = 0 ; i < vinsn->num_slots; i++)
{
TInsn *op1 = &vinsn->slots[i];
if (op1->is_specific_opcode)
- op1->keep_wide = TRUE;
+ op1->keep_wide = true;
else
- op1->keep_wide = FALSE;
+ op1->keep_wide = false;
}
for (i = 0 ; i < vinsn->num_slots; i++)
as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same register"),
xtensa_opcode_name (isa, op1->opcode), i,
xtensa_opcode_name (isa, op2->opcode), j);
- return TRUE;
+ return true;
case 'd':
as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same state"),
xtensa_opcode_name (isa, op1->opcode), i,
xtensa_opcode_name (isa, op2->opcode), j);
- return TRUE;
+ return true;
case 'e':
as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same port"),
xtensa_opcode_name (isa, op1->opcode), i,
xtensa_opcode_name (isa, op2->opcode), j);
- return TRUE;
+ return true;
case 'f':
as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) both have volatile port accesses"),
xtensa_opcode_name (isa, op1->opcode), i,
xtensa_opcode_name (isa, op2->opcode), j);
- return TRUE;
+ return true;
default:
/* Everything is OK. */
break;
if (branches > 1)
{
as_bad (_("multiple branches or jumps in the same bundle"));
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
int t2_states;
int t1_interfaces;
int t2_interfaces;
- bfd_boolean t1_volatile = FALSE;
- bfd_boolean t2_volatile = FALSE;
+ bool t1_volatile = false;
+ bool t2_volatile = false;
/* Check registers. */
for (j = 0; j < t2->ntok; j++)
{
xtensa_state t1_so = xtensa_stateOperand_state (isa, t1->opcode, i);
t1_inout = xtensa_stateOperand_inout (isa, t1->opcode, i);
- if (t1_so != t2_so)
+ if (t1_so != t2_so || xtensa_state_is_shared_or (isa, t1_so) == 1)
continue;
if (t2_inout == 'i' && (t1_inout == 'm' || t1_inout == 'o'))
t2_inout = xtensa_interface_inout (isa, t2_int);
if (xtensa_interface_has_side_effect (isa, t2_int) == 1)
- t2_volatile = TRUE;
+ t2_volatile = true;
for (i = 0; i < t1_interfaces; i++)
{
t1_inout = xtensa_interface_inout (isa, t1_int);
if (xtensa_interface_has_side_effect (isa, t1_int) == 1)
- t1_volatile = TRUE;
+ t1_volatile = true;
if (t1_volatile && t2_volatile && (t1_class == t2_class))
return 'f';
xtensa_isa isa = xtensa_default_isa;
xtensa_format format;
- vliw_insn v_copy = *vinsn;
xtensa_opcode nop_opcode = xtensa_nop_opcode;
if (vinsn->num_slots == 1)
for (format = 0; format < xtensa_isa_num_formats (isa); format++)
{
- v_copy = *vinsn;
+ vliw_insn v_copy;
+ xg_copy_vinsn (&v_copy, vinsn);
if (xtensa_format_num_slots (isa, format) == v_copy.num_slots)
{
int slot;
if (!v_copy.slots[slot].keep_wide
&& !v_copy.slots[slot].is_specific_opcode
&& xg_is_single_relaxable_insn (&v_copy.slots[slot],
- &widened, TRUE)
+ &widened, true)
&& opcode_fits_format_slot (widened.opcode,
format, slot))
{
}
if (fit == v_copy.num_slots)
{
- *vinsn = v_copy;
+ xg_copy_vinsn (vinsn, &v_copy);
xtensa_format_encode (isa, format, vinsn->insnbuf);
vinsn->format = format;
break;
each tinsn in the vinsn. */
static int
-relaxation_requirements (vliw_insn *vinsn, bfd_boolean *pfinish_frag)
+relaxation_requirements (vliw_insn *vinsn, bool *pfinish_frag)
{
- bfd_boolean finish_frag = FALSE;
+ bool finish_frag = false;
int extra_space = 0;
int slot;
{
/* A narrow instruction could be widened later to help
alignment issues. */
- if (xg_is_single_relaxable_insn (tinsn, 0, TRUE)
+ if (xg_is_single_relaxable_insn (tinsn, 0, true)
&& !tinsn->is_specific_opcode
&& vinsn->num_slots == 1)
{
{
/* A fix record will be added for this instruction prior
to relaxation, so make it end the frag. */
- finish_frag = TRUE;
+ finish_frag = true;
}
}
}
int slot, chosen_slot;
vinsn->format = xg_get_single_format (tinsn->opcode);
- assert (vinsn->format != XTENSA_UNDEFINED);
+ gas_assert (vinsn->format != XTENSA_UNDEFINED);
vinsn->num_slots = xtensa_format_num_slots (isa, vinsn->format);
chosen_slot = xg_get_single_slot (tinsn->opcode);
}
-static bfd_boolean
+static bool
emit_single_op (TInsn *orig_insn)
{
int i;
|| orig_insn->opcode == xtensa_movi_n_opcode)
&& !cur_vinsn.inside_bundle
&& (orig_insn->tok[1].X_op == O_symbol
- || orig_insn->tok[1].X_op == O_pltrel)
+ || orig_insn->tok[1].X_op == O_pltrel
+ || orig_insn->tok[1].X_op == O_tlsfunc
+ || orig_insn->tok[1].X_op == O_tlsarg
+ || orig_insn->tok[1].X_op == O_tpoff
+ || orig_insn->tok[1].X_op == O_dtpoff)
&& !orig_insn->is_specific_opcode && use_transform ())
xg_assembly_relax (&istack, orig_insn, now_seg, frag_now, 0, 1, 0);
else
if (xg_expand_assembly_insn (&istack, orig_insn))
- return TRUE;
+ return true;
for (i = 0; i < istack.ninsn; i++)
{
switch (insn->insn_type)
{
case ITYPE_LITERAL:
- assert (lit_sym == NULL);
+ gas_assert (lit_sym == NULL);
lit_sym = xg_assemble_literal (insn);
break;
case ITYPE_LABEL:
{
static int relaxed_sym_idx = 0;
- char *label = xmalloc (strlen (FAKE_LABEL_NAME) + 12);
+ char *label = XNEWVEC (char, strlen (FAKE_LABEL_NAME) + 12);
sprintf (label, "%s_rl_%x", FAKE_LABEL_NAME, relaxed_sym_idx++);
colon (label);
- assert (label_sym == NULL);
+ gas_assert (label_sym == NULL);
label_sym = symbol_find_or_make (label);
- assert (label_sym);
+ gas_assert (label_sym);
free (label);
}
break;
}
break;
default:
- assert (0);
+ gas_assert (0);
break;
}
}
- return FALSE;
+ return false;
}
int slot;
int total_expansion = 0;
- for (slot = 0; slot < MAX_SLOTS; slot++)
+ for (slot = 0; slot < config_max_slots; slot++)
total_expansion += fragP->tc_frag_data.text_expansion[slot];
return total_expansion;
static void
xg_assemble_vliw_tokens (vliw_insn *vinsn)
{
- bfd_boolean finish_frag;
- bfd_boolean is_jump = FALSE;
- bfd_boolean is_branch = FALSE;
+ bool finish_frag;
+ bool is_jump = false;
+ bool is_branch = false;
xtensa_isa isa = xtensa_default_isa;
int insn_size;
int extra_space;
char *f = NULL;
int slot;
struct dwarf2_line_info debug_line;
- bfd_boolean loc_directive_seen = FALSE;
+ bool loc_directive_seen = false;
TInsn *tinsn;
memset (&debug_line, 0, sizeof (struct dwarf2_line_info));
if (frag_now_fix () != 0
&& (! frag_now->tc_frag_data.is_insn
|| (vinsn_has_specific_opcodes (vinsn) && use_transform ())
- || !use_transform () != frag_now->tc_frag_data.is_no_transform
+ || (!use_transform ()) != frag_now->tc_frag_data.is_no_transform
|| (directive_state[directive_longcalls]
!= frag_now->tc_frag_data.use_longcalls)
|| (directive_state[directive_absolute_literals]
&& xtensa_opcode_is_branch (isa, vinsn->slots[0].opcode) == 1
&& use_transform ())
{
- has_a0_b_retw = TRUE;
+ has_a0_b_retw = true;
/* Mark this fragment with the special RELAX_ADD_NOP_IF_A0_B_RETW.
After the first assembly pass we will check all of them and
add a nop if needed. */
- frag_now->tc_frag_data.is_insn = TRUE;
+ frag_now->tc_frag_data.is_insn = true;
frag_var (rs_machine_dependent, 4, 4,
RELAX_ADD_NOP_IF_A0_B_RETW,
frag_now->fr_symbol,
frag_now->fr_offset,
NULL);
xtensa_set_frag_assembly_state (frag_now);
- frag_now->tc_frag_data.is_insn = TRUE;
+ frag_now->tc_frag_data.is_insn = true;
frag_var (rs_machine_dependent, 4, 4,
RELAX_ADD_NOP_IF_A0_B_RETW,
frag_now->fr_symbol,
|| tinsn->debug_line.column < debug_line.column))
debug_line = tinsn->debug_line;
if (tinsn->loc_directive_seen)
- loc_directive_seen = TRUE;
+ loc_directive_seen = true;
}
/* Special cases for instructions that force an alignment... */
target_sym = vinsn->slots[0].tok[1].X_add_symbol;
xtensa_set_frag_assembly_state (frag_now);
- frag_now->tc_frag_data.is_insn = TRUE;
+ frag_now->tc_frag_data.is_insn = true;
max_fill = get_text_align_max_fill_size
(get_text_align_power (xtensa_fetch_width),
- TRUE, frag_now->tc_frag_data.is_no_density);
+ true, frag_now->tc_frag_data.is_no_density);
if (use_transform ())
frag_var (rs_machine_dependent, max_fill, max_fill,
is_bad_loopend_opcode (&vinsn->slots[0]));
}
else
- set_last_insn_flags (now_seg, now_subseg, FLAG_IS_BAD_LOOPEND, FALSE);
+ set_last_insn_flags (now_seg, now_subseg, FLAG_IS_BAD_LOOPEND, false);
insn_size = xtensa_format_length (isa, vinsn->format);
{
f = frag_more (insn_size + extra_space);
xtensa_set_frag_assembly_state (frag_now);
- frag_now->tc_frag_data.is_insn = TRUE;
+ frag_now->tc_frag_data.is_insn = true;
}
- vinsn_to_insnbuf (vinsn, f, frag_now, FALSE);
+ vinsn_to_insnbuf (vinsn, f, frag_now, false);
if (vinsn->format == XTENSA_UNDEFINED)
return;
frag_now->tc_frag_data.slot_symbols[slot] = tinsn->symbol;
frag_now->tc_frag_data.slot_offsets[slot] = tinsn->offset;
frag_now->tc_frag_data.literal_frags[slot] = tinsn->literal_frag;
+ if (tinsn->opcode == xtensa_l32r_opcode)
+ frag_now->tc_frag_data.literal_frags[slot]
+ = symbol_get_frag (tinsn->tok[1].X_add_symbol);
if (tinsn->literal_space != 0)
xg_assemble_literal_space (tinsn->literal_space, slot);
+ frag_now->tc_frag_data.free_reg[slot] = tinsn->extra_arg;
if (tinsn->subtype == RELAX_NARROW)
- assert (vinsn->num_slots == 1);
+ gas_assert (vinsn->num_slots == 1);
if (xtensa_opcode_is_jump (isa, tinsn->opcode) == 1)
- is_jump = TRUE;
+ is_jump = true;
if (xtensa_opcode_is_branch (isa, tinsn->opcode) == 1)
- is_branch = TRUE;
+ is_branch = true;
if (tinsn->subtype || tinsn->symbol || tinsn->offset
|| tinsn->literal_frag || is_jump || is_branch)
- finish_frag = TRUE;
+ finish_frag = true;
}
if (vinsn_has_specific_opcodes (vinsn) && use_transform ())
- frag_now->tc_frag_data.is_specific_opcode = TRUE;
+ frag_now->tc_frag_data.is_specific_opcode = true;
if (finish_frag)
{
{
if (workaround_short_loop && use_transform ())
{
- maybe_has_short_loop = TRUE;
- frag_now->tc_frag_data.is_insn = TRUE;
+ maybe_has_short_loop = true;
+ frag_now->tc_frag_data.is_insn = true;
frag_var (rs_machine_dependent, 4, 4,
RELAX_ADD_NOP_IF_SHORT_LOOP,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
- frag_now->tc_frag_data.is_insn = TRUE;
+ frag_now->tc_frag_data.is_insn = true;
frag_var (rs_machine_dependent, 4, 4,
RELAX_ADD_NOP_IF_SHORT_LOOP,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
loop at least 12 bytes away from another loop's end. */
if (workaround_close_loop_end && use_transform ())
{
- maybe_has_close_loop_end = TRUE;
- frag_now->tc_frag_data.is_insn = TRUE;
+ maybe_has_close_loop_end = true;
+ frag_now->tc_frag_data.is_insn = true;
frag_var (rs_machine_dependent, 12, 12,
RELAX_ADD_NOP_IF_CLOSE_LOOP_END,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
{
if (is_jump)
{
- assert (finish_frag);
+ gas_assert (finish_frag);
frag_var (rs_machine_dependent,
- UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH,
+ xtensa_fetch_width, xtensa_fetch_width,
RELAX_UNREACHABLE,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
+ xtensa_maybe_create_trampoline_frag ();
+ /* Always create one here. */
+ xtensa_maybe_create_literal_pool_frag (true, false);
}
else if (is_branch && do_align_targets ())
{
- assert (finish_frag);
+ gas_assert (finish_frag);
frag_var (rs_machine_dependent,
- UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH,
+ xtensa_fetch_width, xtensa_fetch_width,
RELAX_MAYBE_UNREACHABLE,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
&& xtensa_opcode_is_call (isa, vinsn->slots[0].opcode) == 1)
{
float freq = get_subseg_total_freq (now_seg, now_subseg);
- frag_now->tc_frag_data.is_insn = TRUE;
+ frag_now->tc_frag_data.is_insn = true;
frag_var (rs_machine_dependent, 4, (int) freq, RELAX_DESIRE_ALIGN,
frag_now->fr_symbol, frag_now->fr_offset, NULL);
xtensa_set_frag_assembly_state (frag_now);
directive_balance ();
xtensa_flush_pending_output ();
- past_xtensa_end = TRUE;
+ past_xtensa_end = true;
xtensa_move_literals ();
xtensa_sanity_check ();
xtensa_add_config_info ();
+
+ xtensa_check_frag_count ();
}
+struct trampoline_chain_entry
+{
+ symbolS *sym;
+ addressT offset;
+};
+
+/* Trampoline chain for a given (sym, offset) pair is a sorted array
+ of locations of trampoline jumps leading there. Jumps are represented
+ as pairs (sym, offset): trampoline frag symbol and offset of the jump
+ inside the frag. */
+struct trampoline_chain
+{
+ struct trampoline_chain_entry target;
+ struct trampoline_chain_entry *entry;
+ size_t n_entries;
+ size_t n_max;
+ bool needs_sorting;
+};
-static void
-xtensa_cleanup_align_frags (void)
+struct trampoline_chain_index
{
- frchainS *frchP;
- asection *s;
+ struct trampoline_chain *entry;
+ size_t n_entries;
+ size_t n_max;
+ bool needs_sorting;
+};
- for (s = stdoutput->sections; s; s = s->next)
- for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if ((fragP->fr_type == rs_align
- || fragP->fr_type == rs_align_code
- || (fragP->fr_type == rs_machine_dependent
- && (fragP->fr_subtype == RELAX_DESIRE_ALIGN
- || fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)))
- && fragP->fr_fix == 0)
- {
- fragS *next = fragP->fr_next;
+struct trampoline_index
+{
+ fragS **entry;
+ size_t n_entries;
+ size_t n_max;
+};
- while (next
- && next->fr_fix == 0
- && next->fr_type == rs_machine_dependent
- && next->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
- {
- frag_wane (next);
- next = next->fr_next;
- }
- }
- /* If we don't widen branch targets, then they
- will be easier to align. */
- if (fragP->tc_frag_data.is_branch_target
- && fragP->fr_opcode == fragP->fr_literal
- && fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_SLOTS
- && fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
- frag_wane (fragP);
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_UNREACHABLE)
- fragP->tc_frag_data.is_unreachable = TRUE;
- }
- }
-}
+struct trampoline_seg
+{
+ struct trampoline_seg *next;
+ asection *seg;
+ /* Trampolines ordered by their frag fr_address */
+ struct trampoline_index index;
+ /* Known trampoline chains ordered by (sym, offset) pair */
+ struct trampoline_chain_index chain_index;
+};
+static struct trampoline_seg trampoline_seg_list;
+#define J_RANGE (128 * 1024)
+#define J_MARGIN 4096
+
+static int unreachable_count = 0;
-/* Re-process all of the fragments looking to convert all of the
- RELAX_DESIRE_ALIGN_IF_TARGET fragments. If there is a branch
- target in the next fragment, convert this to RELAX_DESIRE_ALIGN.
- Otherwise, convert to a .fill 0. */
static void
-xtensa_fix_target_frags (void)
+xtensa_maybe_create_trampoline_frag (void)
{
- frchainS *frchP;
- asection *s;
+ if (!use_trampolines)
+ return;
- /* When this routine is called, all of the subsections are still intact
- so we walk over subsections instead of sections. */
- for (s = stdoutput->sections; s; s = s->next)
- for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
- {
- fragS *fragP;
+ /* We create an area for possible trampolines every 10 unreachable frags.
+ These are preferred over the ones not preceded by an unreachable frag,
+ because we don't have to jump around them. This function is called after
+ each RELAX_UNREACHABLE frag is created. */
- /* Walk over all of the fragments in a subsection. */
- for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
- {
- if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
- {
- if (next_frag_is_branch_target (fragP))
+ if (++unreachable_count > 10)
+ {
+ xtensa_create_trampoline_frag (false);
+ clear_frag_count ();
+ unreachable_count = 0;
+ }
+}
+
+static void
+xtensa_check_frag_count (void)
+{
+ if (!use_trampolines || frag_now->tc_frag_data.is_no_transform)
+ return;
+
+ /* We create an area for possible trampolines every 8000 frags or so. This
+ is an estimate based on the max range of a "j" insn (+/-128K) divided
+ by a typical frag byte count (16), minus a few for safety. This function
+ is called after each source line is processed. */
+
+ if (get_frag_count () > 8000)
+ {
+ xtensa_create_trampoline_frag (true);
+ clear_frag_count ();
+ unreachable_count = 0;
+ }
+
+ /* We create an area for a possible literal pool every N (default 5000)
+ frags or so. */
+ xtensa_maybe_create_literal_pool_frag (true, true);
+}
+
+static xtensa_insnbuf trampoline_buf = NULL;
+static xtensa_insnbuf trampoline_slotbuf = NULL;
+
+static xtensa_insnbuf litpool_buf = NULL;
+static xtensa_insnbuf litpool_slotbuf = NULL;
+
+#define TRAMPOLINE_FRAG_SIZE 3000
+
+static struct trampoline_seg *
+find_trampoline_seg (asection *seg)
+{
+ struct trampoline_seg *ts = trampoline_seg_list.next;
+ static struct trampoline_seg *mr;
+
+ if (mr && mr->seg == seg)
+ return mr;
+
+ for ( ; ts; ts = ts->next)
+ {
+ if (ts->seg == seg)
+ {
+ mr = ts;
+ return ts;
+ }
+ }
+
+ return NULL;
+}
+
+static size_t xg_find_trampoline (const struct trampoline_index *idx,
+ addressT addr)
+{
+ size_t a = 0;
+ size_t b = idx->n_entries;
+
+ while (b - a > 1)
+ {
+ size_t c = (a + b) / 2;
+
+ if (idx->entry[c]->fr_address <= addr)
+ a = c;
+ else
+ b = c;
+ }
+ return a;
+}
+
+static void xg_add_trampoline_to_index (struct trampoline_index *idx,
+ fragS *fragP)
+{
+ if (idx->n_entries == idx->n_max)
+ {
+ idx->n_max = (idx->n_entries + 1) * 2;
+ idx->entry = xrealloc (idx->entry,
+ sizeof (*idx->entry) * idx->n_max);
+ }
+ idx->entry[idx->n_entries] = fragP;
+ ++idx->n_entries;
+}
+
+static void xg_remove_trampoline_from_index (struct trampoline_index *idx,
+ size_t i)
+{
+ gas_assert (i < idx->n_entries);
+ memmove (idx->entry + i, idx->entry + i + 1,
+ (idx->n_entries - i - 1) * sizeof (*idx->entry));
+ --idx->n_entries;
+}
+
+static void xg_add_trampoline_to_seg (struct trampoline_seg *ts,
+ fragS *fragP)
+{
+ xg_add_trampoline_to_index (&ts->index, fragP);
+}
+
+static void
+xtensa_create_trampoline_frag (bool needs_jump_around)
+{
+ /* Emit a frag where we can place intermediate jump instructions,
+ in case we need to jump farther than 128K bytes.
+ Each jump instruction takes three bytes.
+ We allocate enough for 1000 trampolines in each frag.
+ If that's not enough, oh well. */
+
+ struct trampoline_seg *ts = find_trampoline_seg (now_seg);
+ char *varP;
+ fragS *fragP;
+ int size = TRAMPOLINE_FRAG_SIZE;
+
+ if (ts == NULL)
+ {
+ ts = XCNEW(struct trampoline_seg);
+ ts->next = trampoline_seg_list.next;
+ trampoline_seg_list.next = ts;
+ ts->seg = now_seg;
+ }
+
+ frag_wane (frag_now);
+ frag_new (0);
+ xtensa_set_frag_assembly_state (frag_now);
+ varP = frag_var (rs_machine_dependent, size, size, RELAX_TRAMPOLINE, NULL, 0, NULL);
+ fragP = (fragS *)(varP - SIZEOF_STRUCT_FRAG);
+ if (trampoline_buf == NULL)
+ {
+ trampoline_buf = xtensa_insnbuf_alloc (xtensa_default_isa);
+ trampoline_slotbuf = xtensa_insnbuf_alloc (xtensa_default_isa);
+ }
+ fragP->tc_frag_data.needs_jump_around = needs_jump_around;
+ xg_add_trampoline_to_seg (ts, fragP);
+}
+
+static bool xg_is_trampoline_frag_full (const fragS *fragP)
+{
+ return fragP->fr_var < 3;
+}
+
+static int xg_order_trampoline_chain_entry (const void *a, const void *b)
+{
+ const struct trampoline_chain_entry *pa = a;
+ const struct trampoline_chain_entry *pb = b;
+
+ if (pa->sym != pb->sym)
+ {
+ valueT aval = S_GET_VALUE (pa->sym);
+ valueT bval = S_GET_VALUE (pb->sym);
+
+ if (aval != bval)
+ return aval < bval ? -1 : 1;
+ }
+ if (pa->offset != pb->offset)
+ return pa->offset < pb->offset ? -1 : 1;
+ return 0;
+}
+
+static void xg_sort_trampoline_chain (struct trampoline_chain *tc)
+{
+ qsort (tc->entry, tc->n_entries, sizeof (*tc->entry),
+ xg_order_trampoline_chain_entry);
+ tc->needs_sorting = false;
+}
+
+/* Find entry index in the given chain with maximal address <= source. */
+static size_t xg_find_chain_entry (struct trampoline_chain *tc,
+ addressT source)
+{
+ size_t a = 0;
+ size_t b = tc->n_entries;
+
+ if (tc->needs_sorting)
+ xg_sort_trampoline_chain (tc);
+
+ while (b - a > 1)
+ {
+ size_t c = (a + b) / 2;
+ struct trampoline_chain_entry *e = tc->entry + c;
+
+ if (S_GET_VALUE(e->sym) + e->offset <= source)
+ a = c;
+ else
+ b = c;
+ }
+ return a;
+}
+
+/* Find the best jump target for the source in the given trampoline chain.
+ The best jump target is the one that results in the shortest path to the
+ final target, it's the location of the jump closest to the final target,
+ but within the J_RANGE - J_MARGIN from the source. */
+static struct trampoline_chain_entry *
+xg_get_best_chain_entry (struct trampoline_chain *tc, addressT source)
+{
+ addressT target = S_GET_VALUE(tc->target.sym) + tc->target.offset;
+ size_t i = xg_find_chain_entry (tc, source);
+ struct trampoline_chain_entry *e = tc->entry + i;
+ int step = target < source ? -1 : 1;
+ addressT chained_target;
+ offsetT off;
+
+ if (target > source &&
+ S_GET_VALUE(e->sym) + e->offset <= source &&
+ i + 1 < tc->n_entries)
+ ++i;
+
+ while (i + step < tc->n_entries)
+ {
+ struct trampoline_chain_entry *next = tc->entry + i + step;
+
+ chained_target = S_GET_VALUE(next->sym) + next->offset;
+ off = source - chained_target;
+
+ if (labs (off) >= J_RANGE - J_MARGIN)
+ break;
+
+ i += step;
+ }
+
+ e = tc->entry + i;
+ chained_target = S_GET_VALUE(e->sym) + e->offset;
+ off = source - chained_target;
+
+ if (labs (off) < J_MARGIN ||
+ labs (off) >= J_RANGE - J_MARGIN)
+ return &tc->target;
+ return tc->entry + i;
+}
+
+static int xg_order_trampoline_chain (const void *a, const void *b)
+{
+ const struct trampoline_chain *_pa = a;
+ const struct trampoline_chain *_pb = b;
+ const struct trampoline_chain_entry *pa = &_pa->target;
+ const struct trampoline_chain_entry *pb = &_pb->target;
+ symbolS *s1 = pa->sym;
+ symbolS *s2 = pb->sym;
+
+ if (s1 != s2)
+ {
+ symbolS *tmp = symbol_symbolS (s1);
+ if (tmp)
+ s1 = tmp;
+
+ tmp = symbol_symbolS (s2);
+ if (tmp)
+ s2 = tmp;
+
+ if (s1 != s2)
+ return s1 < s2 ? -1 : 1;
+ }
+
+ if (pa->offset != pb->offset)
+ return pa->offset < pb->offset ? -1 : 1;
+ return 0;
+}
+
+static struct trampoline_chain *
+xg_get_trampoline_chain (struct trampoline_seg *ts,
+ symbolS *sym,
+ addressT offset)
+{
+ struct trampoline_chain_index *idx = &ts->chain_index;
+ struct trampoline_chain c;
+
+ if (idx->n_entries == 0)
+ return NULL;
+
+ if (idx->needs_sorting)
+ {
+ qsort (idx->entry, idx->n_entries, sizeof (*idx->entry),
+ xg_order_trampoline_chain);
+ idx->needs_sorting = false;
+ }
+ c.target.sym = sym;
+ c.target.offset = offset;
+ return bsearch (&c, idx->entry, idx->n_entries,
+ sizeof (struct trampoline_chain),
+ xg_order_trampoline_chain);
+}
+
+/* Find trampoline chain in the given trampoline segment that is going
+ to the *sym + *offset. If found, replace *sym and *offset with the
+ best jump target in that chain. */
+static struct trampoline_chain *
+xg_find_best_eq_target (struct trampoline_seg *ts,
+ addressT source, symbolS **sym,
+ addressT *offset)
+{
+ struct trampoline_chain *tc = xg_get_trampoline_chain (ts, *sym, *offset);
+
+ if (tc)
+ {
+ struct trampoline_chain_entry *e = xg_get_best_chain_entry (tc, source);
+
+ *sym = e->sym;
+ *offset = e->offset;
+ }
+ return tc;
+}
+
+static void xg_add_location_to_chain (struct trampoline_chain *tc,
+ symbolS *sym, addressT offset)
+{
+ struct trampoline_chain_entry *e;
+
+ if (tc->n_entries == tc->n_max)
+ {
+ tc->n_max = (tc->n_max + 1) * 2;
+ tc->entry = xrealloc (tc->entry, sizeof (*tc->entry) * tc->n_max);
+ }
+ e = tc->entry + tc->n_entries;
+ e->sym = sym;
+ e->offset = offset;
+ ++tc->n_entries;
+ tc->needs_sorting = true;
+}
+
+static struct trampoline_chain *
+xg_create_trampoline_chain (struct trampoline_seg *ts,
+ symbolS *sym, addressT offset)
+{
+ struct trampoline_chain_index *idx = &ts->chain_index;
+ struct trampoline_chain *tc;
+
+ if (idx->n_entries == idx->n_max)
+ {
+ idx->n_max = (idx->n_max + 1) * 2;
+ idx->entry = xrealloc (idx->entry,
+ sizeof (*idx->entry) * idx->n_max);
+ }
+
+ tc = idx->entry + idx->n_entries;
+ tc->target.sym = sym;
+ tc->target.offset = offset;
+ tc->entry = NULL;
+ tc->n_entries = 0;
+ tc->n_max = 0;
+ xg_add_location_to_chain (tc, sym, offset);
+
+ ++idx->n_entries;
+ idx->needs_sorting = true;
+
+ return tc;
+}
+
+void dump_trampolines (void);
+
+void
+dump_trampolines (void)
+{
+ struct trampoline_seg *ts = trampoline_seg_list.next;
+
+ for ( ; ts; ts = ts->next)
+ {
+ size_t i;
+ asection *seg = ts->seg;
+
+ if (seg == NULL)
+ continue;
+ fprintf(stderr, "SECTION %s\n", seg->name);
+
+ for (i = 0; i < ts->index.n_entries; ++i)
+ {
+ fragS *tf = ts->index.entry[i];
+
+ fprintf(stderr, " 0x%08x: fix=%d, jump_around=%s\n",
+ (int)tf->fr_address, (int)tf->fr_fix,
+ tf->tc_frag_data.needs_jump_around ? "T" : "F");
+ }
+ }
+}
+
+static void dump_litpools (void) __attribute__ ((unused));
+
+static void
+dump_litpools (void)
+{
+ struct litpool_seg *lps = litpool_seg_list.next;
+ struct litpool_frag *lpf;
+
+ for ( ; lps ; lps = lps->next )
+ {
+ printf("litpool seg %s\n", lps->seg->name);
+ for ( lpf = lps->frag_list.next; lpf->fragP; lpf = lpf->next )
+ {
+ fragS *litfrag = lpf->fragP->fr_next;
+ int count = 0;
+ while (litfrag && litfrag->fr_subtype != RELAX_LITERAL_POOL_END)
+ {
+ if (litfrag->fr_fix == 4)
+ count++;
+ litfrag = litfrag->fr_next;
+ }
+ printf(" %ld <%d:%d> (%d) [%d]: ",
+ lpf->addr, lpf->priority, lpf->original_priority,
+ lpf->fragP->fr_line, count);
+ /* dump_frag(lpf->fragP); */
+ }
+ }
+}
+
+static void
+xtensa_maybe_create_literal_pool_frag (bool create, bool only_if_needed)
+{
+ struct litpool_seg *lps = litpool_seg_list.next;
+ fragS *fragP;
+ struct litpool_frag *lpf;
+ bool needed = false;
+
+ if (use_literal_section || !auto_litpools)
+ return;
+
+ for ( ; lps ; lps = lps->next )
+ {
+ if (lps->seg == now_seg)
+ break;
+ }
+
+ if (lps == NULL)
+ {
+ lps = XCNEW (struct litpool_seg);
+ lps->next = litpool_seg_list.next;
+ litpool_seg_list.next = lps;
+ lps->seg = now_seg;
+ lps->frag_list.next = &lps->frag_list;
+ lps->frag_list.prev = &lps->frag_list;
+ /* Put candidate literal pool at the beginning of every section,
+ so that even when section starts with literal load there's a
+ literal pool available. */
+ lps->frag_count = auto_litpool_limit;
+ }
+
+ lps->frag_count++;
+
+ if (create)
+ {
+ if (only_if_needed)
+ {
+ if (past_xtensa_end || !use_transform() ||
+ frag_now->tc_frag_data.is_no_transform)
+ {
+ return;
+ }
+ if (auto_litpool_limit <= 0)
+ {
+ /* Don't create a litpool based only on frag count. */
+ return;
+ }
+ else if (lps->frag_count > auto_litpool_limit)
+ {
+ needed = true;
+ }
+ else
+ {
+ return;
+ }
+ }
+ else
+ {
+ needed = true;
+ }
+ }
+
+ if (needed)
+ {
+ int size = (only_if_needed) ? 3 : 0; /* Space for a "j" insn. */
+ /* Create a potential site for a literal pool. */
+ frag_wane (frag_now);
+ frag_new (0);
+ xtensa_set_frag_assembly_state (frag_now);
+ fragP = frag_now;
+ fragP->tc_frag_data.lit_frchain = frchain_now;
+ fragP->tc_frag_data.literal_frag = fragP;
+ frag_var (rs_machine_dependent, size, size,
+ (only_if_needed) ?
+ RELAX_LITERAL_POOL_CANDIDATE_BEGIN :
+ RELAX_LITERAL_POOL_BEGIN,
+ NULL, 0, NULL);
+ frag_now->tc_frag_data.lit_seg = now_seg;
+ frag_variant (rs_machine_dependent, 0, 0,
+ RELAX_LITERAL_POOL_END, NULL, 0, NULL);
+ xtensa_set_frag_assembly_state (frag_now);
+ }
+ else
+ {
+ /* RELAX_LITERAL_POOL_BEGIN frag is being created;
+ just record it here. */
+ fragP = frag_now;
+ }
+
+ lpf = XNEW (struct litpool_frag);
+ /* Insert at tail of circular list. */
+ lpf->addr = 0;
+ lps->frag_list.prev->next = lpf;
+ lpf->next = &lps->frag_list;
+ lpf->prev = lps->frag_list.prev;
+ lps->frag_list.prev = lpf;
+ lpf->fragP = fragP;
+ lpf->priority = (needed) ? (only_if_needed) ? 3 : 2 : 1;
+ lpf->original_priority = lpf->priority;
+ lpf->literal_count = 0;
+
+ lps->frag_count = 0;
+}
+
+static void
+xtensa_cleanup_align_frags (void)
+{
+ frchainS *frchP;
+ asection *s;
+
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if ((fragP->fr_type == rs_align
+ || fragP->fr_type == rs_align_code
+ || (fragP->fr_type == rs_machine_dependent
+ && (fragP->fr_subtype == RELAX_DESIRE_ALIGN
+ || fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)))
+ && fragP->fr_fix == 0)
+ {
+ fragS *next = fragP->fr_next;
+
+ while (next
+ && next->fr_fix == 0
+ && next->fr_type == rs_machine_dependent
+ && next->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
+ {
+ frag_wane (next);
+ next = next->fr_next;
+ }
+ }
+ /* If we don't widen branch targets, then they
+ will be easier to align. */
+ if (fragP->tc_frag_data.is_branch_target
+ && fragP->fr_opcode == fragP->fr_literal
+ && fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_SLOTS
+ && fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
+ frag_wane (fragP);
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_UNREACHABLE)
+ fragP->tc_frag_data.is_unreachable = true;
+ }
+ }
+}
+
+
+/* Re-process all of the fragments looking to convert all of the
+ RELAX_DESIRE_ALIGN_IF_TARGET fragments. If there is a branch
+ target in the next fragment, convert this to RELAX_DESIRE_ALIGN.
+ Otherwise, convert to a .fill 0. */
+
+static void
+xtensa_fix_target_frags (void)
+{
+ frchainS *frchP;
+ asection *s;
+
+ /* When this routine is called, all of the subsections are still intact
+ so we walk over subsections instead of sections. */
+ for (s = stdoutput->sections; s; s = s->next)
+ for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+
+ /* Walk over all of the fragments in a subsection. */
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (fragP->fr_type == rs_machine_dependent
+ && fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET)
+ {
+ if (next_frag_is_branch_target (fragP))
fragP->fr_subtype = RELAX_DESIRE_ALIGN;
else
frag_wane (fragP);
}
-static bfd_boolean is_narrow_branch_guaranteed_in_range (fragS *, TInsn *);
+static bool is_narrow_branch_guaranteed_in_range (fragS *, TInsn *);
static void
xtensa_mark_narrow_branches (void)
static offsetT unrelaxed_frag_max_size (fragS *);
-static bfd_boolean
+static bool
is_narrow_branch_guaranteed_in_range (fragS *fragP, TInsn *tinsn)
{
- const expressionS *expr = &tinsn->tok[1];
- symbolS *symbolP = expr->X_add_symbol;
- offsetT max_distance = expr->X_add_number;
+ const expressionS *exp = &tinsn->tok[1];
+ symbolS *symbolP = exp->X_add_symbol;
+ offsetT max_distance = exp->X_add_number;
fragS *target_frag;
- if (expr->X_op != O_symbol)
- return FALSE;
+ if (exp->X_op != O_symbol)
+ return false;
target_frag = symbol_get_frag (symbolP);
max_distance += (S_GET_VALUE (symbolP) - target_frag->fr_address);
if (is_branch_jmp_to_next (tinsn, fragP))
- return FALSE;
+ return false;
/* The branch doesn't branch over it's own frag,
but over the subsequent ones. */
fragP = fragP->fr_next;
}
if (max_distance <= MAX_IMMED6 && fragP == target_frag)
- return TRUE;
- return FALSE;
+ return true;
+ return false;
}
|| fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE))
{
/* Find the loop frag. */
- fragS *targ_frag = next_non_empty_frag (fragP);
+ fragS *loop_frag = next_non_empty_frag (fragP);
/* Find the first insn frag. */
- targ_frag = next_non_empty_frag (targ_frag);
+ fragS *targ_frag = next_non_empty_frag (loop_frag);
+
+ /* Handle a corner case that comes up in hardware
+ diagnostics. The original assembly looks like this:
+
+ loop aX, LabelA
+ <empty_frag>--not found by next_non_empty_frag
+ loop aY, LabelB
+
+ Depending on the start address, the assembler may or
+ may not change it to look something like this:
+
+ loop aX, LabelA
+ nop--frag isn't empty anymore
+ loop aY, LabelB
+
+ So set up to check the alignment of the nop if it
+ exists */
+ while (loop_frag != targ_frag)
+ {
+ if (loop_frag->fr_type == rs_machine_dependent
+ && (loop_frag->fr_subtype == RELAX_ALIGN_NEXT_OPCODE
+ || loop_frag->fr_subtype
+ == RELAX_CHECK_ALIGN_NEXT_OPCODE))
+ targ_frag = loop_frag;
+ else
+ loop_frag = loop_frag->fr_next;
+ }
/* Of course, sometimes (mostly for toy test cases) a
zero-cost loop instruction is the last in a section. */
if (targ_frag)
{
- targ_frag->tc_frag_data.is_first_loop_insn = TRUE;
+ targ_frag->tc_frag_data.is_first_loop_insn = true;
/* Do not widen a frag that is the first instruction of a
zero-cost loop. It makes that loop harder to align. */
if (targ_frag->fr_type == rs_machine_dependent
sleb128 value, the linker is unable to adjust that value to account for
link-time relaxation. Mark all the code between such symbols so that
its size cannot be changed by linker relaxation. */
-
+
static void
xtensa_mark_difference_of_two_symbols (void)
{
symbolS *expr_sym;
- for (expr_sym = expr_symbols; expr_sym;
+ for (expr_sym = expr_symbols; expr_sym;
expr_sym = symbol_get_tc (expr_sym)->next_expr_symbol)
{
- expressionS *expr = symbol_get_value_expression (expr_sym);
+ expressionS *exp = symbol_get_value_expression (expr_sym);
- if (expr->X_op == O_subtract)
+ if (exp->X_op == O_subtract)
{
- symbolS *left = expr->X_add_symbol;
- symbolS *right = expr->X_op_symbol;
-
+ symbolS *left = exp->X_add_symbol;
+ symbolS *right = exp->X_op_symbol;
+
/* Difference of two symbols not in the same section
are handled with relocations in the linker. */
if (S_GET_SEGMENT (left) == S_GET_SEGMENT (right))
{
fragS *start;
fragS *end;
+ fragS *walk;
- if (symbol_get_frag (left)->fr_address
+ if (symbol_get_frag (left)->fr_address
<= symbol_get_frag (right)->fr_address)
{
start = symbol_get_frag (left);
start = symbol_get_frag (right);
end = symbol_get_frag (left);
}
- do
+
+ if (start->tc_frag_data.no_transform_end != NULL)
+ walk = start->tc_frag_data.no_transform_end;
+ else
+ walk = start;
+ do
{
- start->tc_frag_data.is_no_transform = 1;
- start = start->fr_next;
+ walk->tc_frag_data.is_no_transform = 1;
+ walk = walk->fr_next;
}
- while (start && start->fr_address < end->fr_address);
+ while (walk && walk->fr_address < end->fr_address);
+
+ start->tc_frag_data.no_transform_end = walk;
}
}
}
conditional branch or a retw/retw.n, convert this frag to one that
will generate a NOP. In any case close it off with a .fill 0. */
-static bfd_boolean next_instrs_are_b_retw (fragS *);
+static bool next_instrs_are_b_retw (fragS *);
static void
xtensa_fix_a0_b_retw_frags (void)
}
-static bfd_boolean
+static bool
next_instrs_are_b_retw (fragS *fragP)
{
xtensa_opcode opcode;
static xtensa_insnbuf insnbuf = NULL;
static xtensa_insnbuf slotbuf = NULL;
xtensa_isa isa = xtensa_default_isa;
- int offset = 0;
+ unsigned int offset = 0;
int slot;
- bfd_boolean branch_seen = FALSE;
+ bool branch_seen = false;
if (!insnbuf)
{
}
if (next_fragP == NULL)
- return FALSE;
+ return false;
/* Check for the conditional branch. */
xtensa_insnbuf_from_chars
(isa, insnbuf, (unsigned char *) &next_fragP->fr_literal[offset], 0);
fmt = xtensa_format_decode (isa, insnbuf);
if (fmt == XTENSA_UNDEFINED)
- return FALSE;
+ return false;
for (slot = 0; slot < xtensa_format_num_slots (isa, fmt); slot++)
{
}
if (!branch_seen)
- return FALSE;
+ return false;
offset += xtensa_format_length (isa, fmt);
if (offset == next_fragP->fr_fix)
}
if (next_fragP == NULL)
- return FALSE;
+ return false;
/* Check for the retw/retw.n. */
xtensa_insnbuf_from_chars
have no problems. */
if (fmt == XTENSA_UNDEFINED
|| xtensa_format_num_slots (isa, fmt) != 1)
- return FALSE;
+ return false;
xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf);
opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
if (opcode == xtensa_retw_opcode || opcode == xtensa_retw_n_opcode)
- return TRUE;
+ return true;
- return FALSE;
+ return false;
}
loop end label, convert this frag to one that will generate a NOP.
In any case close it off with a .fill 0. */
-static bfd_boolean next_instr_is_loop_end (fragS *);
+static bool next_instr_is_loop_end (fragS *);
static void
xtensa_fix_b_j_loop_end_frags (void)
}
-static bfd_boolean
+static bool
next_instr_is_loop_end (fragS *fragP)
{
const fragS *next_fragP;
if (next_frag_is_loop_target (fragP))
- return FALSE;
+ return false;
next_fragP = next_non_empty_frag (fragP);
if (next_fragP == NULL)
- return FALSE;
+ return false;
if (!next_frag_is_loop_target (next_fragP))
- return FALSE;
+ return false;
/* If the size is >= 3 then there is more than one instruction here.
The hardware bug will not fire. */
if (next_fragP->fr_fix > 3)
- return FALSE;
+ return false;
- return TRUE;
+ return true;
}
}
frag_wane (fragP);
}
- assert (fragP->fr_type != rs_machine_dependent
+ gas_assert (fragP->fr_type != rs_machine_dependent
|| fragP->fr_subtype != RELAX_ADD_NOP_IF_CLOSE_LOOP_END);
}
}
break;
default:
/* We had darn well better know how big it is. */
- assert (0);
+ gas_assert (0);
break;
}
then convert this frag (and maybe the next one) to generate a NOP.
In any case close it off with a .fill 0. */
-static int count_insns_to_loop_end (fragS *, bfd_boolean, int);
-static bfd_boolean branch_before_loop_end (fragS *);
+static int count_insns_to_loop_end (fragS *, bool, int);
+static bool branch_before_loop_end (fragS *);
static void
xtensa_fix_short_loop_frags (void)
for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
{
fragS *fragP;
- fragS *current_target = NULL;
xtensa_opcode current_opcode = XTENSA_UNDEFINED;
/* Walk over all of the fragments in a subsection. */
TInsn t_insn;
fragS *loop_frag = next_non_empty_frag (fragP);
tinsn_from_chars (&t_insn, loop_frag->fr_opcode, 0);
- current_target = symbol_get_frag (fragP->fr_symbol);
current_opcode = t_insn.opcode;
- assert (xtensa_opcode_is_loop (xtensa_default_isa,
+ gas_assert (xtensa_opcode_is_loop (xtensa_default_isa,
current_opcode) == 1);
}
if (fragP->fr_type == rs_machine_dependent
&& fragP->fr_subtype == RELAX_ADD_NOP_IF_SHORT_LOOP)
{
- if (count_insns_to_loop_end (fragP->fr_next, TRUE, 3) < 3
+ if (count_insns_to_loop_end (fragP->fr_next, true, 3) < 3
&& (branch_before_loop_end (fragP->fr_next)
|| (workaround_all_short_loops
&& current_opcode != XTENSA_UNDEFINED
static int
count_insns_to_loop_end (fragS *base_fragP,
- bfd_boolean count_relax_add,
+ bool count_relax_add,
int max_count)
{
fragS *fragP = NULL;
xtensa_isa isa = xtensa_default_isa;
static xtensa_insnbuf insnbuf = NULL;
int insn_count = 0;
- int offset = 0;
+ unsigned int offset = 0;
if (!fragP->tc_frag_data.is_insn)
return insn_count;
}
-static bfd_boolean unrelaxed_frag_has_b_j (fragS *);
+static bool unrelaxed_frag_has_b_j (fragS *);
-static bfd_boolean
+static bool
branch_before_loop_end (fragS *base_fragP)
{
fragS *fragP;
fragP = fragP->fr_next)
{
if (unrelaxed_frag_has_b_j (fragP))
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
-static bfd_boolean
+static bool
unrelaxed_frag_has_b_j (fragS *fragP)
{
static xtensa_insnbuf insnbuf = NULL;
xtensa_isa isa = xtensa_default_isa;
- int offset = 0;
+ unsigned int offset = 0;
if (!fragP->tc_frag_data.is_insn)
- return FALSE;
+ return false;
if (!insnbuf)
insnbuf = xtensa_insnbuf_alloc (isa);
(isa, insnbuf, (unsigned char *) fragP->fr_literal + offset, 0);
fmt = xtensa_format_decode (isa, insnbuf);
if (fmt == XTENSA_UNDEFINED)
- return FALSE;
+ return false;
for (slot = 0; slot < xtensa_format_num_slots (isa, fmt); slot++)
{
get_opcode_from_buf (fragP->fr_literal + offset, slot);
if (xtensa_opcode_is_branch (isa, opcode) == 1
|| xtensa_opcode_is_jump (isa, opcode) == 1)
- return TRUE;
+ return true;
}
offset += xtensa_format_length (isa, fmt);
}
- return FALSE;
+ return false;
}
/* Checks to be made after initial assembly but before relaxation. */
-static bfd_boolean is_empty_loop (const TInsn *, fragS *);
-static bfd_boolean is_local_forward_loop (const TInsn *, fragS *);
+static bool is_empty_loop (const TInsn *, fragS *);
+static bool is_local_forward_loop (const TInsn *, fragS *);
static void
xtensa_sanity_check (void)
{
- char *file_name;
+ const char *file_name;
unsigned line;
frchainS *frchP;
asection *s;
- as_where (&file_name, &line);
+ file_name = as_where (&line);
for (s = stdoutput->sections; s; s = s->next)
for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next)
{
for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
{
if (fragP->fr_type == rs_machine_dependent
- && fragP->fr_subtype == RELAX_SLOTS
+ && fragP->fr_subtype == RELAX_SLOTS
&& fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED)
{
static xtensa_insnbuf insnbuf = NULL;
/* Return TRUE if the loop target is the next non-zero fragment. */
-static bfd_boolean
+static bool
is_empty_loop (const TInsn *insn, fragS *fragP)
{
- const expressionS *expr;
+ const expressionS *exp;
symbolS *symbolP;
fragS *next_fragP;
if (insn->insn_type != ITYPE_INSN)
- return FALSE;
+ return false;
if (xtensa_opcode_is_loop (xtensa_default_isa, insn->opcode) != 1)
- return FALSE;
+ return false;
if (insn->ntok <= LOOP_IMMED_OPN)
- return FALSE;
+ return false;
- expr = &insn->tok[LOOP_IMMED_OPN];
+ exp = &insn->tok[LOOP_IMMED_OPN];
- if (expr->X_op != O_symbol)
- return FALSE;
+ if (exp->X_op != O_symbol)
+ return false;
- symbolP = expr->X_add_symbol;
+ symbolP = exp->X_add_symbol;
if (!symbolP)
- return FALSE;
+ return false;
if (symbol_get_frag (symbolP) == NULL)
- return FALSE;
+ return false;
if (S_GET_VALUE (symbolP) != 0)
- return FALSE;
+ return false;
/* Walk through the zero-size fragments from this one. If we find
the target fragment, then this is a zero-size loop. */
next_fragP = next_fragP->fr_next)
{
if (next_fragP == symbol_get_frag (symbolP))
- return TRUE;
+ return true;
if (next_fragP->fr_fix != 0)
- return FALSE;
+ return false;
}
- return FALSE;
+ return false;
}
-static bfd_boolean
+static bool
is_local_forward_loop (const TInsn *insn, fragS *fragP)
{
- const expressionS *expr;
+ const expressionS *exp;
symbolS *symbolP;
fragS *next_fragP;
if (insn->insn_type != ITYPE_INSN)
- return FALSE;
+ return false;
if (xtensa_opcode_is_loop (xtensa_default_isa, insn->opcode) != 1)
- return FALSE;
+ return false;
if (insn->ntok <= LOOP_IMMED_OPN)
- return FALSE;
+ return false;
- expr = &insn->tok[LOOP_IMMED_OPN];
+ exp = &insn->tok[LOOP_IMMED_OPN];
- if (expr->X_op != O_symbol)
- return FALSE;
+ if (exp->X_op != O_symbol)
+ return false;
- symbolP = expr->X_add_symbol;
+ symbolP = exp->X_add_symbol;
if (!symbolP)
- return FALSE;
+ return false;
if (symbol_get_frag (symbolP) == NULL)
- return FALSE;
+ return false;
/* Walk through fragments until we find the target.
If we do not find the target, then this is an invalid loop. */
next_fragP = next_fragP->fr_next)
{
if (next_fragP == symbol_get_frag (symbolP))
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
-
#define XTINFO_NAME "Xtensa_Info"
#define XTINFO_NAMESZ 12
#define XTINFO_TYPE 1
int sz;
info_sec = subseg_new (".xtensa.info", 0);
- bfd_set_section_flags (stdoutput, info_sec, SEC_HAS_CONTENTS | SEC_READONLY);
+ bfd_set_section_flags (info_sec, SEC_HAS_CONTENTS | SEC_READONLY);
- data = xmalloc (100);
+ data = XNEWVEC (char, 100);
sprintf (data, "USE_ABSOLUTE_LITERALS=%d\nABI=%d\n",
- XSHAL_USE_ABSOLUTE_LITERALS, XSHAL_ABI);
+ XSHAL_USE_ABSOLUTE_LITERALS, xtensa_abi_choice ());
sz = strlen (data) + 1;
/* Add enough null terminators to pad to a word boundary. */
{
if (target_size <= 4)
return 2;
- assert (target_size == 8);
- return 3;
+
+ if (target_size <= 8)
+ return 3;
+
+ if (target_size <= 16)
+ return 4;
+
+ if (target_size <= 32)
+ return 5;
+
+ if (target_size <= 64)
+ return 6;
+
+ if (target_size <= 128)
+ return 7;
+
+ if (target_size <= 256)
+ return 8;
+
+ if (target_size <= 512)
+ return 9;
+
+ if (target_size <= 1024)
+ return 10;
+
+ gas_assert (0);
+ return 0;
}
static int
get_text_align_max_fill_size (int align_pow,
- bfd_boolean use_nops,
- bfd_boolean use_no_density)
+ bool use_nops,
+ bool use_no_density)
{
if (!use_nops)
return (1 << align_pow);
get_text_align_fill_size (addressT address,
int align_pow,
int target_size,
- bfd_boolean use_nops,
- bfd_boolean use_no_density)
+ bool use_nops,
+ bool use_no_density)
{
addressT alignment, fill, fill_limit, fill_step;
- bfd_boolean skip_one = FALSE;
+ bool skip_one = false;
alignment = (1 << align_pow);
- assert (target_size > 0 && alignment >= (addressT) target_size);
+ gas_assert (target_size > 0 && alignment >= (addressT) target_size);
if (!use_nops)
{
/* Combine 2- and 3-byte NOPs to fill anything larger than one. */
fill_limit = alignment * 2;
fill_step = 1;
- skip_one = TRUE;
+ skip_one = true;
}
else
{
== (address + fill + target_size - 1) >> align_pow)
return fill;
}
- assert (0);
+ gas_assert (0);
return 0;
}
static int
branch_align_power (segT sec)
{
- /* If the Xtensa processor has a fetch width of 8 bytes, and the section
- is aligned to at least an 8-byte boundary, then a branch target need
- only fit within an 8-byte aligned block of memory to avoid a stall.
- Otherwise, try to fit branch targets within 4-byte aligned blocks
- (which may be insufficient, e.g., if the section has no alignment, but
- it's good enough). */
- if (xtensa_fetch_width == 8)
- {
- if (get_recorded_alignment (sec) >= 3)
- return 3;
- }
- else
- assert (xtensa_fetch_width == 4);
+ /* If the Xtensa processor has a fetch width of X, and
+ the section is aligned to at least that boundary, then a branch
+ target need only fit within that aligned block of memory to avoid
+ a stall. Otherwise, try to fit branch targets within 4-byte
+ aligned blocks (which may be insufficient, e.g., if the section
+ has no alignment, but it's good enough). */
+ int fetch_align = get_text_align_power(xtensa_fetch_width);
+ int sec_align = get_recorded_alignment (sec);
+
+ if (sec_align >= fetch_align)
+ return fetch_align;
return 2;
}
/* This will assert if it is not possible. */
static int
-get_text_align_nop_count (offsetT fill_size, bfd_boolean use_no_density)
+get_text_align_nop_count (offsetT fill_size, bool use_no_density)
{
int count = 0;
if (use_no_density)
{
- assert (fill_size % 3 == 0);
+ gas_assert (fill_size % 3 == 0);
return (fill_size / 3);
}
- assert (fill_size != 1); /* Bad argument. */
+ gas_assert (fill_size != 1); /* Bad argument. */
while (fill_size > 1)
{
fill_size -= insn_size;
count++;
}
- assert (fill_size != 1); /* Bad algorithm. */
+ gas_assert (fill_size != 1); /* Bad algorithm. */
return count;
}
static int
get_text_align_nth_nop_size (offsetT fill_size,
int n,
- bfd_boolean use_no_density)
+ bool use_no_density)
{
int count = 0;
if (use_no_density)
return 3;
- assert (fill_size != 1); /* Bad argument. */
+ gas_assert (fill_size != 1); /* Bad argument. */
while (fill_size > 1)
{
if (n + 1 == count)
return insn_size;
}
- assert (0);
+ gas_assert (0);
return 0;
}
int align_power;
fragS *first_insn;
xtensa_opcode opcode;
- bfd_boolean is_loop;
+ bool is_loop;
- assert (fragP->fr_type == rs_machine_dependent);
- assert (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE);
+ gas_assert (fragP->fr_type == rs_machine_dependent);
+ gas_assert (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE);
/* Find the loop frag. */
first_insn = next_non_empty_frag (fragP);
first_insn = next_non_empty_frag (first_insn);
is_loop = next_frag_opcode_is_loop (fragP, &opcode);
- assert (is_loop);
+ gas_assert (is_loop);
loop_insn_size = xg_get_single_size (opcode);
pre_opcode_bytes = next_frag_pre_opcode_bytes (fragP);
record_alignment (now_seg, align_power);
fill_size = get_text_align_fill_size
- (address + pre_opcode_bytes, align_power, first_insn_size, TRUE,
+ (address + pre_opcode_bytes, align_power, first_insn_size, true,
fragP->tc_frag_data.is_no_density);
return address + fill_size;
addressT target_address, loop_insn_offset;
int target_size;
xtensa_opcode loop_opcode;
- bfd_boolean is_loop;
+ bool is_loop;
int align_power;
offsetT opt_diff;
offsetT branch_align;
fragS *loop_frag;
- assert (fragP->fr_type == rs_machine_dependent);
+ gas_assert (fragP->fr_type == rs_machine_dependent);
switch (fragP->fr_subtype)
{
case RELAX_DESIRE_ALIGN:
if (target_size > branch_align)
target_size = branch_align;
opt_diff = get_text_align_fill_size (address, align_power,
- target_size, FALSE, FALSE);
+ target_size, false, false);
*max_diff = (opt_diff + branch_align
- (target_size + ((address + opt_diff) % branch_align)));
- assert (*max_diff >= opt_diff);
+ gas_assert (*max_diff >= opt_diff);
return opt_diff;
case RELAX_ALIGN_NEXT_OPCODE:
target_size = get_loop_align_size (next_frag_format_size (loop_frag));
loop_insn_offset = 0;
is_loop = next_frag_opcode_is_loop (fragP, &loop_opcode);
- assert (is_loop);
+ gas_assert (is_loop);
/* If the loop has been expanded then the LOOP instruction
could be at an offset from this fragment. */
address + loop_insn_offset + xg_get_single_size (loop_opcode);
align_power = get_text_align_power (target_size);
opt_diff = get_text_align_fill_size (target_address, align_power,
- target_size, FALSE, FALSE);
+ target_size, false, false);
*max_diff = xtensa_fetch_width
- ((target_address + opt_diff) % xtensa_fetch_width)
- target_size + opt_diff;
- assert (*max_diff >= opt_diff);
+ gas_assert (*max_diff >= opt_diff);
return opt_diff;
default:
break;
}
- assert (0);
+ gas_assert (0);
return 0;
}
static long relax_frag_loop_align (fragS *, long);
static long relax_frag_for_align (fragS *, long);
static long relax_frag_immed
- (segT, fragS *, long, int, xtensa_format, int, int *, bfd_boolean);
+ (segT, fragS *, long, int, xtensa_format, int, int *, bool);
+
+/* Get projected address for the first fulcrum on a path from source to
+ target. */
+static addressT xg_get_fulcrum (addressT source, addressT target)
+{
+ offsetT delta = target - source;
+ int n;
+
+ n = (labs (delta) + J_RANGE - J_MARGIN - 1) / (J_RANGE - J_MARGIN);
+ return source + delta / n;
+}
+
+/* Given trampoline index, source and target of a jump find the best
+ candidate trampoline for the first fulcrum. The best trampoline is
+ the one in the reach of "j' instruction from the source, closest to
+ the projected fulcrum address, and preferrably w/o a jump around or
+ with already initialized jump around. */
+static size_t xg_find_best_trampoline (struct trampoline_index *idx,
+ addressT source, addressT target)
+{
+ addressT fulcrum = xg_get_fulcrum (source, target);
+ size_t dist = 0;
+ size_t best = -1;
+ size_t base_tr = xg_find_trampoline (idx, fulcrum);
+ int checked = 1;
+
+ /* Check trampoline frags around the base_tr to find the best. */
+ for (dist = 0; checked; ++dist)
+ {
+ int i;
+ size_t tr = base_tr - dist;
+
+ checked = 0;
+
+ /* Trampolines are checked in the following order:
+ base_tr, base_tr + 1, base_tr - 1, base_tr + 2, base_tr - 2 */
+ for (i = 0; i < 2; ++i, tr = base_tr + dist + 1)
+ if (tr < idx->n_entries)
+ {
+ fragS *trampoline_frag = idx->entry[tr];
+ offsetT off;
+
+ /* Don't check trampolines outside source - target interval. */
+ if ((trampoline_frag->fr_address < source &&
+ trampoline_frag->fr_address < target) ||
+ (trampoline_frag->fr_address > source &&
+ trampoline_frag->fr_address > target))
+ continue;
+
+ /* Don't choose trampoline that contains the source. */
+ if (source >= trampoline_frag->fr_address
+ && source <= trampoline_frag->fr_address +
+ trampoline_frag->fr_fix)
+ continue;
+
+ off = trampoline_frag->fr_address - fulcrum;
+ /* Stop if some trampoline is found and the search is more than
+ J_RANGE / 4 from the projected fulcrum. A trampoline w/o jump
+ around is nice, but it shouldn't have much overhead. */
+ if (best < idx->n_entries && labs (off) > J_RANGE / 4)
+ return best;
+
+ off = trampoline_frag->fr_address - source;
+ if (labs (off) < J_RANGE - J_MARGIN)
+ {
+ ++checked;
+ /* Stop if a trampoline w/o jump around is found or initialized
+ trampoline with jump around is found. */
+ if (!trampoline_frag->tc_frag_data.needs_jump_around ||
+ trampoline_frag->fr_fix)
+ return tr;
+ else if (best >= idx->n_entries)
+ best = tr;
+ }
+ }
+ }
+
+ if (best < idx->n_entries)
+ return best;
+ else
+ as_fatal (_("cannot find suitable trampoline"));
+}
+
+static fixS *xg_relax_fixup (struct trampoline_index *idx, fixS *fixP)
+{
+ symbolS *s = fixP->fx_addsy;
+ addressT source = fixP->fx_frag->fr_address;
+ addressT target = S_GET_VALUE (s) + fixP->fx_offset;
+ size_t tr = xg_find_best_trampoline (idx, source, target);
+ fragS *trampoline_frag = idx->entry[tr];
+ fixS *newfixP;
+
+ init_trampoline_frag (trampoline_frag);
+ newfixP = xg_append_jump (trampoline_frag,
+ fixP->fx_addsy, fixP->fx_offset);
+
+ /* Adjust the fixup for the original "j" instruction to
+ point to the newly added jump. */
+ fixP->fx_addsy = trampoline_frag->fr_symbol;
+ fixP->fx_offset = trampoline_frag->fr_fix - 3;
+ fixP->tc_fix_data.X_add_symbol = trampoline_frag->fr_symbol;
+ fixP->tc_fix_data.X_add_number = trampoline_frag->fr_fix - 3;
+
+ trampoline_frag->tc_frag_data.relax_seen = false;
+
+ if (xg_is_trampoline_frag_full (trampoline_frag))
+ xg_remove_trampoline_from_index (idx, tr);
+
+ return newfixP;
+}
+
+static bool xg_is_relaxable_fixup (fixS *fixP)
+{
+ xtensa_isa isa = xtensa_default_isa;
+ addressT addr = fixP->fx_frag->fr_address;
+ addressT target;
+ offsetT delta;
+ symbolS *s = fixP->fx_addsy;
+ int slot;
+ xtensa_format fmt;
+ xtensa_opcode opcode;
+
+ if (fixP->fx_r_type < BFD_RELOC_XTENSA_SLOT0_OP ||
+ fixP->fx_r_type > BFD_RELOC_XTENSA_SLOT14_OP)
+ return false;
+
+ target = S_GET_VALUE (s) + fixP->fx_offset;
+ delta = target - addr;
+
+ if (labs (delta) < J_RANGE - J_MARGIN)
+ return false;
+
+ xtensa_insnbuf_from_chars (isa, trampoline_buf,
+ (unsigned char *) fixP->fx_frag->fr_literal +
+ fixP->fx_where, 0);
+ fmt = xtensa_format_decode (isa, trampoline_buf);
+ gas_assert (fmt != XTENSA_UNDEFINED);
+ slot = fixP->tc_fix_data.slot;
+ xtensa_format_get_slot (isa, fmt, slot, trampoline_buf, trampoline_slotbuf);
+ opcode = xtensa_opcode_decode (isa, fmt, slot, trampoline_slotbuf);
+ return opcode == xtensa_j_opcode;
+}
+
+static void xg_relax_fixups (struct trampoline_seg *ts)
+{
+ struct trampoline_index *idx = &ts->index;
+ segment_info_type *seginfo = seg_info (now_seg);
+ fixS *fx;
+
+ for (fx = seginfo->fix_root; fx; fx = fx->fx_next)
+ {
+ fixS *fixP = fx;
+ struct trampoline_chain *tc = NULL;
+
+ if (xg_is_relaxable_fixup (fixP))
+ {
+ tc = xg_find_best_eq_target (ts, fixP->fx_frag->fr_address,
+ &fixP->fx_addsy, &fixP->fx_offset);
+ if (!tc)
+ tc = xg_create_trampoline_chain (ts, fixP->fx_addsy,
+ fixP->fx_offset);
+ gas_assert (tc);
+ }
+
+ while (xg_is_relaxable_fixup (fixP))
+ {
+ fixP = xg_relax_fixup (idx, fixP);
+ xg_add_location_to_chain (tc, fixP->fx_frag->fr_symbol,
+ fixP->fx_where);
+ }
+ }
+}
+/* Given a trampoline frag relax all jumps that might want to use this
+ trampoline. Only do real work once per relaxation cycle, when
+ xg_relax_trampoline is called for the first trampoline in the now_seg.
+ Don't use stretch, don't update new_stretch: place fulcrums with a
+ slack to tolerate code movement. In the worst case if a jump between
+ two trampolines wouldn't reach the next relaxation pass will fix it. */
+static void xg_relax_trampoline (fragS *fragP, long stretch ATTRIBUTE_UNUSED,
+ long *new_stretch ATTRIBUTE_UNUSED)
+{
+ struct trampoline_seg *ts = find_trampoline_seg (now_seg);
+
+ if (ts->index.n_entries && ts->index.entry[0] == fragP)
+ xg_relax_fixups (ts);
+}
/* Return the number of bytes added to this fragment, given that the
input has been stretched already by "stretch". */
xtensa_isa isa = xtensa_default_isa;
int unreported = fragP->tc_frag_data.unreported_expansion;
long new_stretch = 0;
- char *file_name;
+ const char *file_name;
unsigned line;
int lit_size;
static xtensa_insnbuf vbuf = NULL;
int slot, num_slots;
xtensa_format fmt;
- as_where (&file_name, &line);
+ file_name = as_where (&line);
new_logical_line (fragP->fr_file, fragP->fr_line);
fragP->tc_frag_data.unreported_expansion = 0;
case RELAX_LITERAL_NR:
lit_size = 4;
fragP->fr_subtype = RELAX_LITERAL_FINAL;
- assert (unreported == lit_size);
+ gas_assert (unreported == lit_size);
memset (&fragP->fr_literal[fragP->fr_fix], 0, 4);
fragP->fr_var -= lit_size;
fragP->fr_fix += lit_size;
new_stretch += relax_frag_immed
(now_seg, fragP, stretch,
fragP->tc_frag_data.slot_subtypes[slot] - RELAX_IMMED,
- fmt, slot, stretched_p, FALSE);
+ fmt, slot, stretched_p, false);
break;
default:
break;
case RELAX_LITERAL_POOL_BEGIN:
+ if (fragP->fr_var != 0)
+ {
+ /* We have a converted "candidate" literal pool;
+ assemble a jump around it. */
+ TInsn insn;
+ if (!litpool_slotbuf)
+ {
+ litpool_buf = xtensa_insnbuf_alloc (isa);
+ litpool_slotbuf = xtensa_insnbuf_alloc (isa);
+ }
+ new_stretch += 3;
+ fragP->tc_frag_data.relax_seen = false; /* Need another pass. */
+ fragP->tc_frag_data.is_insn = true;
+ tinsn_init (&insn);
+ insn.insn_type = ITYPE_INSN;
+ insn.opcode = xtensa_j_opcode;
+ insn.ntok = 1;
+ set_expr_symbol_offset (&insn.tok[0], fragP->fr_symbol,
+ fragP->fr_fix);
+ fmt = xg_get_single_format (xtensa_j_opcode);
+ tinsn_to_slotbuf (fmt, 0, &insn, litpool_slotbuf);
+ xtensa_format_set_slot (isa, fmt, 0, litpool_buf, litpool_slotbuf);
+ xtensa_insnbuf_to_chars (isa, litpool_buf,
+ (unsigned char *)fragP->fr_literal +
+ fragP->fr_fix, 3);
+ fragP->fr_fix += 3;
+ fragP->fr_var -= 3;
+ /* Add a fix-up. */
+ fix_new (fragP, 0, 3, fragP->fr_symbol, 0, true,
+ BFD_RELOC_XTENSA_SLOT0_OP);
+ }
+ break;
+
case RELAX_LITERAL_POOL_END:
+ case RELAX_LITERAL_POOL_CANDIDATE_BEGIN:
case RELAX_MAYBE_UNREACHABLE:
case RELAX_MAYBE_DESIRE_ALIGN:
/* No relaxation required. */
new_stretch += relax_frag_for_align (fragP, stretch);
break;
+ case RELAX_TRAMPOLINE:
+ if (fragP->tc_frag_data.relax_seen)
+ xg_relax_trampoline (fragP, stretch, &new_stretch);
+ break;
+
default:
as_bad (_("bad relaxation state"));
}
/* Tell gas we need another relaxation pass. */
if (! fragP->tc_frag_data.relax_seen)
{
- fragP->tc_frag_data.relax_seen = TRUE;
+ fragP->tc_frag_data.relax_seen = true;
*stretched_p = 1;
}
char *nop_buf = fragP->fr_literal + fragP->fr_fix;
int length = fragP->tc_frag_data.is_no_density ? 3 : 2;
assemble_nop (length, nop_buf);
- fragP->tc_frag_data.is_insn = TRUE;
+ fragP->tc_frag_data.is_insn = true;
if (fragP->fr_var < length)
{
long stretch_me;
long diff;
- assert (fragP->fr_subtype == RELAX_FILL_NOP
+ gas_assert (fragP->fr_subtype == RELAX_FILL_NOP
|| fragP->fr_subtype == RELAX_UNREACHABLE
|| (fragP->fr_subtype == RELAX_SLOTS
&& fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW));
int *wide_nops,
int *narrow_nops,
int *widens,
- bfd_boolean *paddable)
+ bool *paddable)
{
fragS *fragP = *fragPP;
addressT address = fragP->fr_address;
switch (fragP->fr_subtype)
{
case RELAX_UNREACHABLE:
- *paddable = TRUE;
+ *paddable = true;
break;
case RELAX_FILL_NOP:
(*widens)++;
break;
}
- address += total_frag_text_expansion (fragP);;
+ address += total_frag_text_expansion (fragP);
break;
case RELAX_IMMED:
int num_widens = 0;
int wide_nops = 0;
int narrow_nops = 0;
- bfd_boolean paddable = FALSE;
+ bool paddable = false;
offsetT local_opt_diff;
offsetT opt_diff;
offsetT max_diff;
{
local_opt_diff = get_aligned_diff (fragP, address, &max_diff);
opt_diff = local_opt_diff;
- assert (opt_diff >= 0);
- assert (max_diff >= opt_diff);
+ gas_assert (opt_diff >= 0);
+ gas_assert (max_diff >= opt_diff);
if (max_diff == 0)
return 0;
int glob_widens = 0;
int dnn = 0;
int dw = 0;
- bfd_boolean glob_pad = 0;
+ bool glob_pad = 0;
address = find_address_of_next_align_frag
(&fragP, &glob_widens, &dnn, &dw, &glob_pad);
/* If there is a padable portion, then skip. */
{
if (this_frag->fr_subtype == RELAX_UNREACHABLE)
{
- assert (opt_diff <= UNREACHABLE_MAX_WIDTH);
+ gas_assert (opt_diff <= (signed) xtensa_fetch_width);
return opt_diff;
}
return 0;
if (this_frag->fr_subtype == RELAX_SLOTS
&& this_frag->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
- assert (stretch_amount <= 1);
+ gas_assert (stretch_amount <= 1);
else if (this_frag->fr_subtype == RELAX_FILL_NOP)
{
if (this_frag->tc_frag_data.is_no_density)
- assert (stretch_amount == 3 || stretch_amount == 0);
+ gas_assert (stretch_amount == 3 || stretch_amount == 0);
else
- assert (stretch_amount <= 3);
+ gas_assert (stretch_amount <= 3);
}
}
return stretch_amount;
/* The idea: widen everything you can to get a target or loop aligned,
then start using NOPs.
- When we must have a NOP, here is a table of how we decide
- (so you don't have to fight through the control flow below):
-
wide_nops = the number of wide NOPs available for aligning
narrow_nops = the number of narrow NOPs available for aligning
(a subset of wide_nops)
widens = the number of narrow instructions that should be widened
- Desired wide narrow
- Diff nop nop widens
- 1 0 0 1
- 2 0 1 0
- 3a 1 0 0
- b 0 1 1 (case 3a makes this case unnecessary)
- 4a 1 0 1
- b 0 2 0
- c 0 1 2 (case 4a makes this case unnecessary)
- 5a 1 0 2
- b 1 1 0
- c 0 2 1 (case 5b makes this case unnecessary)
- 6a 2 0 0
- b 1 0 3
- c 0 1 4 (case 6b makes this case unnecessary)
- d 1 1 1 (case 6a makes this case unnecessary)
- e 0 2 2 (case 6a makes this case unnecessary)
- f 0 3 0 (case 6a makes this case unnecessary)
- 7a 1 0 4
- b 2 0 1
- c 1 1 2 (case 7b makes this case unnecessary)
- d 0 1 5 (case 7a makes this case unnecessary)
- e 0 2 3 (case 7b makes this case unnecessary)
- f 0 3 1 (case 7b makes this case unnecessary)
- g 1 2 1 (case 7b makes this case unnecessary)
*/
static long
int num_widens,
int desired_diff)
{
+ int nops_needed;
+ int nop_bytes;
+ int extra_bytes;
int bytes_short = desired_diff - num_widens;
- assert (desired_diff >= 0 && desired_diff < 8);
+ gas_assert (desired_diff >= 0
+ && desired_diff < (signed) xtensa_fetch_width);
if (desired_diff == 0)
return 0;
- assert (wide_nops > 0 || num_widens > 0);
+ gas_assert (wide_nops > 0 || num_widens > 0);
/* Always prefer widening to NOP-filling. */
if (bytes_short < 0)
/* From here we will need at least one NOP to get an alignment.
However, we may not be able to align at all, in which case,
don't widen. */
- if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ nops_needed = desired_diff / 3;
+
+ /* If there aren't enough nops, don't widen. */
+ if (nops_needed > wide_nops)
+ return 0;
+
+ /* First try it with all wide nops. */
+ nop_bytes = nops_needed * 3;
+ extra_bytes = desired_diff - nop_bytes;
+
+ if (nop_bytes + num_widens >= desired_diff)
{
- switch (desired_diff)
- {
- case 1:
- return 0;
- case 2:
- if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 1)
- return 2; /* case 2 */
- return 0;
- case 3:
- if (wide_nops > 1)
- return 0;
- else
- return 3; /* case 3a */
- case 4:
- if (num_widens >= 1 && wide_nops == 1)
- return 3; /* case 4a */
- if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 2)
- return 2; /* case 4b */
- return 0;
- case 5:
- if (num_widens >= 2 && wide_nops == 1)
- return 3; /* case 5a */
- /* We will need two nops. Are there enough nops
- between here and the align target? */
- if (wide_nops < 2 || narrow_nops == 0)
- return 0;
- /* Are there other nops closer that can serve instead? */
- if (wide_nops > 2 && narrow_nops > 1)
- return 0;
- /* Take the density one first, because there might not be
- another density one available. */
- if (!this_frag->tc_frag_data.is_no_density)
- return 2; /* case 5b narrow */
- else
- return 3; /* case 5b wide */
- return 0;
- case 6:
- if (wide_nops == 2)
- return 3; /* case 6a */
- else if (num_widens >= 3 && wide_nops == 1)
- return 3; /* case 6b */
- return 0;
- case 7:
- if (wide_nops == 1 && num_widens >= 4)
- return 3; /* case 7a */
- else if (wide_nops == 2 && num_widens >= 1)
- return 3; /* case 7b */
- return 0;
- default:
- assert (0);
- }
+ if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ return 3;
+ else if (num_widens == extra_bytes)
+ return 1;
+ return 0;
+ }
+
+ /* Add a narrow nop. */
+ nops_needed++;
+ nop_bytes += 2;
+ extra_bytes -= 2;
+ if (narrow_nops == 0 || nops_needed > wide_nops)
+ return 0;
+
+ if (nop_bytes + num_widens >= desired_diff && extra_bytes >= 0)
+ {
+ if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ return !this_frag->tc_frag_data.is_no_density ? 2 : 3;
+ else if (num_widens == extra_bytes)
+ return 1;
+ return 0;
+ }
+
+ /* Replace a wide nop with a narrow nop--we can get here if
+ extra_bytes was negative in the previous conditional. */
+ if (narrow_nops == 1)
+ return 0;
+ nop_bytes--;
+ extra_bytes++;
+ if (nop_bytes + num_widens >= desired_diff)
+ {
+ if (this_frag->fr_subtype == RELAX_FILL_NOP)
+ return !this_frag->tc_frag_data.is_no_density ? 2 : 3;
+ else if (num_widens == extra_bytes)
+ return 1;
+ return 0;
+ }
+
+ /* If we can't satisfy any of the above cases, then we can't align
+ using padding or fill nops. */
+ return 0;
+}
+
+
+static fragS *
+xg_find_best_trampoline_for_tinsn (TInsn *tinsn, fragS *fragP)
+{
+ symbolS *sym = tinsn->tok[0].X_add_symbol;
+ addressT source = fragP->fr_address;
+ addressT target = S_GET_VALUE (sym) + tinsn->tok[0].X_add_number;
+ struct trampoline_seg *ts = find_trampoline_seg (now_seg);
+ size_t i;
+
+ if (!ts || !ts->index.n_entries)
+ return NULL;
+
+ i = xg_find_best_trampoline (&ts->index, source, target);
+
+ return ts->index.entry[i];
+}
+
+
+/* Append jump to sym + offset to the end of the trampoline frag fragP.
+ Adjust fragP's jump around if it's present. Adjust fragP's fr_fix/fr_var
+ and finish the frag if it's full (but don't remove it from the trampoline
+ frag index). Return fixup for the newly created jump. */
+static fixS *xg_append_jump (fragS *fragP, symbolS *sym, offsetT offset)
+{
+ fixS *fixP;
+ TInsn insn;
+ xtensa_format fmt;
+ xtensa_isa isa = xtensa_default_isa;
+
+ gas_assert (fragP->fr_var >= 3);
+ tinsn_init (&insn);
+ insn.insn_type = ITYPE_INSN;
+ insn.opcode = xtensa_j_opcode;
+ insn.ntok = 1;
+ set_expr_symbol_offset (&insn.tok[0], sym, offset);
+ fmt = xg_get_single_format (xtensa_j_opcode);
+ tinsn_to_slotbuf (fmt, 0, &insn, trampoline_slotbuf);
+ xtensa_format_set_slot (isa, fmt, 0, trampoline_buf, trampoline_slotbuf);
+ xtensa_insnbuf_to_chars (isa, trampoline_buf,
+ (unsigned char *)fragP->fr_literal + fragP->fr_fix, 3);
+ fixP = fix_new (fragP, fragP->fr_fix, 3, sym, offset, true,
+ BFD_RELOC_XTENSA_SLOT0_OP);
+ fixP->tc_fix_data.slot = 0;
+
+ fragP->fr_fix += 3;
+ fragP->fr_var -= 3;
+
+ /* Adjust the jump around this trampoline (if present). */
+ if (fragP->tc_frag_data.jump_around_fix)
+ fragP->tc_frag_data.jump_around_fix->fx_offset += 3;
+
+ /* Do we have room for more? */
+ if (xg_is_trampoline_frag_full (fragP))
+ {
+ frag_wane (fragP);
+ fragP->fr_subtype = 0;
+ }
+
+ return fixP;
+}
+
+
+static int
+init_trampoline_frag (fragS *fp)
+{
+ int growth = 0;
+
+ if (fp->fr_fix == 0)
+ {
+ symbolS *lsym;
+ char label[10 + 2 * sizeof(fp)];
+
+ sprintf (label, ".L0_TR_%p", fp);
+ lsym = (symbolS *) local_symbol_make (label, now_seg, fp, 0);
+ fp->fr_symbol = lsym;
+ if (fp->tc_frag_data.needs_jump_around)
+ {
+ fp->tc_frag_data.jump_around_fix = xg_append_jump (fp, lsym, 3);
+ growth = 3;
+ }
}
- else
+ return growth;
+}
+
+static int
+xg_get_single_symbol_slot (fragS *fragP)
+{
+ int i;
+ int slot = -1;
+
+ for (i = 0; i < MAX_SLOTS; ++i)
+ if (fragP->tc_frag_data.slot_symbols[i])
+ {
+ gas_assert (slot == -1);
+ slot = i;
+ }
+
+ gas_assert (slot >= 0 && slot < MAX_SLOTS);
+
+ return slot;
+}
+
+static fixS *
+add_jump_to_trampoline (fragS *tramp, fragS *origfrag)
+{
+ int slot = xg_get_single_symbol_slot (origfrag);
+ fixS *fixP;
+
+ /* Assemble a jump to the target label in the trampoline frag. */
+ fixP = xg_append_jump (tramp,
+ origfrag->tc_frag_data.slot_symbols[slot],
+ origfrag->tc_frag_data.slot_offsets[slot]);
+
+ /* Modify the original j to point here. */
+ origfrag->tc_frag_data.slot_symbols[slot] = tramp->fr_symbol;
+ origfrag->tc_frag_data.slot_offsets[slot] = tramp->fr_fix - 3;
+
+ /* If trampoline is full, remove it from the list. */
+ if (xg_is_trampoline_frag_full (tramp))
{
- /* We will need a NOP no matter what, but should we widen
- this instruction to help?
+ struct trampoline_seg *ts = find_trampoline_seg (now_seg);
+ size_t tr = xg_find_trampoline (&ts->index, tramp->fr_address);
- This is a RELAX_NARROW frag. */
- switch (desired_diff)
- {
- case 1:
- assert (0);
- return 0;
- case 2:
- case 3:
- return 0;
- case 4:
- if (wide_nops >= 1 && num_widens == 1)
- return 1; /* case 4a */
- return 0;
- case 5:
- if (wide_nops >= 1 && num_widens == 2)
- return 1; /* case 5a */
- return 0;
- case 6:
- if (wide_nops >= 2)
- return 0; /* case 6a */
- else if (wide_nops >= 1 && num_widens == 3)
- return 1; /* case 6b */
- return 0;
- case 7:
- if (wide_nops >= 1 && num_widens == 4)
- return 1; /* case 7a */
- else if (wide_nops >= 2 && num_widens == 1)
- return 1; /* case 7b */
- return 0;
- default:
- assert (0);
- return 0;
- }
+ gas_assert (ts->index.entry[tr] == tramp);
+ xg_remove_trampoline_from_index (&ts->index, tr);
}
- assert (0);
- return 0;
+
+ return fixP;
}
xtensa_format fmt,
int slot,
int *stretched_p,
- bfd_boolean estimate_only)
+ bool estimate_only)
{
TInsn tinsn;
int old_size;
- bfd_boolean negatable_branch = FALSE;
- bfd_boolean branch_jmp_to_next = FALSE;
- bfd_boolean from_wide_insn = FALSE;
+ bool negatable_branch = false;
+ bool branch_jmp_to_next = false;
+ bool from_wide_insn = false;
xtensa_isa isa = xtensa_default_isa;
IStack istack;
offsetT frag_offset;
int num_text_bytes, num_literal_bytes;
int literal_diff, total_text_diff, this_text_diff;
- assert (fragP->fr_opcode != NULL);
+ gas_assert (fragP->fr_opcode != NULL);
xg_clear_vinsn (&cur_vinsn);
vinsn_from_chars (&cur_vinsn, fragP->fr_opcode);
if (cur_vinsn.num_slots > 1)
- from_wide_insn = TRUE;
+ from_wide_insn = true;
tinsn = cur_vinsn.slots[slot];
tinsn_immed_from_frag (&tinsn, fragP, slot);
istack_init (&istack);
num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP, frag_offset,
min_steps, stretch);
- assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
+ gas_assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
fragP->tc_frag_data.slot_subtypes[slot] = (int) RELAX_IMMED + num_steps;
/* The first instruction in the relaxed sequence will go after
the current wide instruction, and thus its symbolic immediates
might not fit. */
-
+
istack_init (&istack);
- num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP,
+ num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP,
frag_offset + old_size,
min_steps, stretch + old_size);
- assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
+ gas_assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS);
- fragP->tc_frag_data.slot_subtypes[slot]
+ fragP->tc_frag_data.slot_subtypes[slot]
= (int) RELAX_IMMED + num_steps;
num_literal_bytes = get_num_stack_literal_bytes (&istack);
- literal_diff
+ literal_diff
= num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot];
-
+
num_text_bytes = get_num_stack_text_bytes (&istack) + old_size;
}
}
this_text_diff = total_text_diff - fragP->tc_frag_data.text_expansion[slot];
/* It MUST get larger. If not, we could get an infinite loop. */
- assert (num_text_bytes >= 0);
- assert (literal_diff >= 0);
- assert (total_text_diff >= 0);
+ gas_assert (num_text_bytes >= 0);
+ gas_assert (literal_diff >= 0);
+ gas_assert (total_text_diff >= 0);
fragP->tc_frag_data.text_expansion[slot] = total_text_diff;
fragP->tc_frag_data.literal_expansion[slot] = num_literal_bytes;
- assert (fragP->tc_frag_data.text_expansion[slot] >= 0);
- assert (fragP->tc_frag_data.literal_expansion[slot] >= 0);
+ gas_assert (fragP->tc_frag_data.text_expansion[slot] >= 0);
+ gas_assert (fragP->tc_frag_data.literal_expansion[slot] >= 0);
/* Find the associated expandable literal for this. */
if (literal_diff != 0)
fragS *lit_fragP = fragP->tc_frag_data.literal_frags[slot];
if (lit_fragP)
{
- assert (literal_diff == 4);
+ gas_assert (literal_diff == 4);
lit_fragP->tc_frag_data.unreported_expansion += literal_diff;
/* We expect that the literal section state has NOT been
modified yet. */
- assert (lit_fragP->fr_type == rs_machine_dependent
+ gas_assert (lit_fragP->fr_type == rs_machine_dependent
&& lit_fragP->fr_subtype == RELAX_LITERAL);
lit_fragP->fr_subtype = RELAX_LITERAL_NR;
if (negatable_branch && istack.ninsn > 1)
update_next_frag_state (fragP);
+ /* If last insn is a jump, and it cannot reach its target, try to find a trampoline. */
+ if (istack.ninsn > 2 &&
+ istack.insn[istack.ninsn - 1].insn_type == ITYPE_LABEL &&
+ istack.insn[istack.ninsn - 2].insn_type == ITYPE_INSN &&
+ istack.insn[istack.ninsn - 2].opcode == xtensa_j_opcode)
+ {
+ TInsn *jinsn = &istack.insn[istack.ninsn - 2];
+ struct trampoline_seg *ts = find_trampoline_seg (segP);
+ struct trampoline_chain *tc = NULL;
+
+ if (ts &&
+ !xg_symbolic_immeds_fit (jinsn, segP, fragP, fragP->fr_offset,
+ total_text_diff))
+ {
+ int s = xg_get_single_symbol_slot (fragP);
+ addressT offset = fragP->tc_frag_data.slot_offsets[s];
+
+ tc = xg_find_best_eq_target (ts, fragP->fr_address,
+ &fragP->tc_frag_data.slot_symbols[s],
+ &offset);
+
+ if (!tc)
+ tc = xg_create_trampoline_chain (ts,
+ fragP->tc_frag_data.slot_symbols[s],
+ offset);
+ fragP->tc_frag_data.slot_offsets[s] = offset;
+ tinsn_immed_from_frag (jinsn, fragP, s);
+ }
+
+ if (!xg_symbolic_immeds_fit (jinsn, segP, fragP, fragP->fr_offset,
+ total_text_diff))
+ {
+ fragS *tf = xg_find_best_trampoline_for_tinsn (jinsn, fragP);
+
+ if (tf)
+ {
+ fixS *fixP;
+
+ this_text_diff += init_trampoline_frag (tf) + 3;
+ fixP = add_jump_to_trampoline (tf, fragP);
+ xg_add_location_to_chain (tc, fixP->fx_frag->fr_symbol,
+ fixP->fx_where);
+ fragP->tc_frag_data.relax_seen = false;
+ }
+ else
+ {
+ /* If target symbol is undefined, assume it will reach once linked. */
+ expressionS *exp = &istack.insn[istack.ninsn - 2].tok[0];
+
+ if (exp->X_op == O_symbol && S_IS_DEFINED (exp->X_add_symbol))
+ {
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("jump target out of range; no usable trampoline found"));
+ }
+ }
+ }
+ }
+
return this_text_diff;
}
int slot;
int num_slots;
xtensa_format fmt;
- char *file_name;
+ const char *file_name;
unsigned line;
- as_where (&file_name, &line);
+ file_name = as_where (&line);
new_logical_line (fragp->fr_file, fragp->fr_line);
switch (fragp->fr_subtype)
fragS *f;
fragp->fr_subtype = RELAX_LITERAL_FINAL;
- assert (fragp->tc_frag_data.unreported_expansion == 4);
+ gas_assert (fragp->tc_frag_data.unreported_expansion == 4);
memset (&fragp->fr_literal[fragp->fr_fix], 0, 4);
fragp->fr_var -= 4;
fragp->fr_fix += 4;
else
as_bad (_("invalid relaxation fragment result"));
break;
+
+ case RELAX_TRAMPOLINE:
+ break;
}
fragp->fr_var = 0;
convert_frag_align_next_opcode (fragS *fragp)
{
char *nop_buf; /* Location for Writing. */
- bfd_boolean use_no_density = fragp->tc_frag_data.is_no_density;
+ bool use_no_density = fragp->tc_frag_data.is_no_density;
addressT aligned_address;
offsetT fill_size;
int nop, nop_count;
int size, old_size, diff;
offsetT frag_offset;
- assert (slot == 0);
+ gas_assert (slot == 0);
tinsn_from_chars (&tinsn, fragP->fr_opcode, 0);
if (fragP->tc_frag_data.is_aligning_branch == 1)
{
- assert (fragP->tc_frag_data.text_expansion[0] == 1
+ gas_assert (fragP->tc_frag_data.text_expansion[0] == 1
|| fragP->tc_frag_data.text_expansion[0] == 0);
convert_frag_immed (segP, fragP, fragP->tc_frag_data.text_expansion[0],
fmt, slot);
return;
}
- assert (fragP->fr_opcode != NULL);
+ gas_assert (fragP->fr_opcode != NULL);
/* Frags in this relaxation state should only contain
single instruction bundles. */
tinsn_init (&single_target);
frag_offset = fragP->fr_opcode - fragP->fr_literal;
- if (! xg_is_single_relaxable_insn (&tinsn, &single_target, FALSE))
+ if (! xg_is_single_relaxable_insn (&tinsn, &single_target, false))
{
as_bad (_("unable to widen instruction"));
return;
size = xg_get_single_size (single_target.opcode);
xg_emit_insn_to_buf (&single_target, fragP->fr_opcode, fragP,
- frag_offset, TRUE);
+ frag_offset, true);
diff = size - old_size;
- assert (diff >= 0);
- assert (diff <= fragP->fr_var);
+ gas_assert (diff >= 0);
+ gas_assert (diff <= fragP->fr_var);
fragP->fr_var -= diff;
fragP->fr_fix += diff;
{
char *loc = &fragP->fr_literal[fragP->fr_fix];
int size = fragP->tc_frag_data.text_expansion[0];
- assert ((unsigned) size == (fragP->fr_next->fr_address
+ gas_assert ((unsigned) size == (fragP->fr_next->fr_address
- fragP->fr_address - fragP->fr_fix));
if (size == 0)
{
return;
}
assemble_nop (size, loc);
- fragP->tc_frag_data.is_insn = TRUE;
+ fragP->tc_frag_data.is_insn = true;
fragP->fr_var -= size;
fragP->fr_fix += size;
frag_wane (fragP);
static fixS *fix_new_exp_in_seg
(segT, subsegT, fragS *, int, int, expressionS *, int,
bfd_reloc_code_real_type);
-static void convert_frag_immed_finish_loop (segT, fragS *, TInsn *);
static void
convert_frag_immed (segT segP,
{
char *immed_instr = fragP->fr_opcode;
TInsn orig_tinsn;
- bfd_boolean expanded = FALSE;
- bfd_boolean branch_jmp_to_next = FALSE;
+ bool expanded = false;
+ bool branch_jmp_to_next = false;
char *fr_opcode = fragP->fr_opcode;
xtensa_isa isa = xtensa_default_isa;
- bfd_boolean from_wide_insn = FALSE;
+ bool from_wide_insn = false;
int bytes;
- bfd_boolean is_loop;
+ bool is_loop;
- assert (fr_opcode != NULL);
+ gas_assert (fr_opcode != NULL);
xg_clear_vinsn (&cur_vinsn);
vinsn_from_chars (&cur_vinsn, fr_opcode);
if (cur_vinsn.num_slots > 1)
- from_wide_insn = TRUE;
+ from_wide_insn = true;
orig_tinsn = cur_vinsn.slots[slot];
tinsn_immed_from_frag (&orig_tinsn, fragP, slot);
else
{
bytes += fragP->tc_frag_data.text_expansion[0];
- assert (bytes == 2 || bytes == 3);
+ gas_assert (bytes == 2 || bytes == 3);
build_nop (&cur_vinsn.slots[0], bytes);
fragP->fr_fix += fragP->tc_frag_data.text_expansion[0];
}
- vinsn_to_insnbuf (&cur_vinsn, fr_opcode, frag_now, TRUE);
+ vinsn_to_insnbuf (&cur_vinsn, fr_opcode, frag_now, true);
xtensa_insnbuf_to_chars
(isa, cur_vinsn.insnbuf, (unsigned char *) fr_opcode, 0);
fragP->fr_var = 0;
int diff;
symbolS *gen_label = NULL;
offsetT frag_offset;
- bfd_boolean first = TRUE;
- bfd_boolean last_is_jump;
+ bool first = true;
/* It does not fit. Find something that does and
convert immediately. */
unreach = unreach->fr_next;
}
- assert (unreach->fr_type == rs_machine_dependent
+ gas_assert (unreach->fr_type == rs_machine_dependent
&& (unreach->fr_subtype == RELAX_MAYBE_UNREACHABLE
|| unreach->fr_subtype == RELAX_UNREACHABLE));
target_offset += unreach->tc_frag_data.text_expansion[0];
}
- assert (gen_label == NULL);
- gen_label = symbol_new (FAKE_LABEL_NAME, now_seg,
+ gas_assert (gen_label == NULL);
+ gen_label = symbol_new (FAKE_LABEL_NAME, now_seg, fragP,
fr_opcode - fragP->fr_literal
- + target_offset, fragP);
+ + target_offset);
break;
case ITYPE_INSN:
if (first && from_wide_insn)
{
target_offset += xtensa_format_length (isa, fmt);
- first = FALSE;
+ first = false;
if (!opcode_fits_format_slot (tinsn->opcode, fmt, slot))
target_offset += xg_get_single_size (tinsn->opcode);
}
}
total_size = 0;
- first = TRUE;
- last_is_jump = FALSE;
+ first = true;
for (i = 0; i < istack.ninsn; i++)
{
TInsn *tinsn = &istack.insn[i];
case ITYPE_LITERAL:
lit_frag = fragP->tc_frag_data.literal_frags[slot];
/* Already checked. */
- assert (lit_frag != NULL);
- assert (lit_sym != NULL);
- assert (tinsn->ntok == 1);
+ gas_assert (lit_frag != NULL);
+ gas_assert (lit_sym != NULL);
+ gas_assert (tinsn->ntok == 1);
/* Add a fixup. */
target_seg = S_GET_SEGMENT (lit_sym);
- assert (target_seg);
- reloc_type = map_operator_to_reloc (tinsn->tok[0].X_op);
+ gas_assert (target_seg);
+ reloc_type = map_operator_to_reloc (tinsn->tok[0].X_op, true);
fix_new_exp_in_seg (target_seg, 0, lit_frag, 0, 4,
- &tinsn->tok[0], FALSE, reloc_type);
+ &tinsn->tok[0], false, reloc_type);
break;
case ITYPE_LABEL:
xg_resolve_literals (tinsn, lit_sym);
if (from_wide_insn && first)
{
- first = FALSE;
+ first = false;
if (opcode_fits_format_slot (tinsn->opcode, fmt, slot))
{
cur_vinsn.slots[slot] = *tinsn;
xtensa_format_slot_nop_opcode (isa, fmt, slot);
cur_vinsn.slots[slot].ntok = 0;
}
- vinsn_to_insnbuf (&cur_vinsn, immed_instr, fragP, TRUE);
+ vinsn_to_insnbuf (&cur_vinsn, immed_instr, fragP, true);
xtensa_insnbuf_to_chars (isa, cur_vinsn.insnbuf,
(unsigned char *) immed_instr, 0);
- fragP->tc_frag_data.is_insn = TRUE;
+ fragP->tc_frag_data.is_insn = true;
size = xtensa_format_length (isa, fmt);
if (!opcode_fits_format_slot (tinsn->opcode, fmt, slot))
{
xg_emit_insn_to_buf
(tinsn, immed_instr + size, fragP,
- immed_instr - fragP->fr_literal + size, TRUE);
+ immed_instr - fragP->fr_literal + size, true);
size += xg_get_single_size (tinsn->opcode);
}
}
{
size = xg_get_single_size (tinsn->opcode);
xg_emit_insn_to_buf (tinsn, immed_instr, fragP,
- immed_instr - fragP->fr_literal, TRUE);
+ immed_instr - fragP->fr_literal, true);
}
immed_instr += size;
total_size += size;
}
diff = total_size - old_size;
- assert (diff >= 0);
+ gas_assert (diff >= 0);
if (diff != 0)
- expanded = TRUE;
- assert (diff <= fragP->fr_var);
+ expanded = true;
+ gas_assert (diff <= fragP->fr_var);
fragP->fr_var -= diff;
fragP->fr_fix += diff;
}
}
}
- if (expanded && xtensa_opcode_is_loop (isa, orig_tinsn.opcode) == 1)
- convert_frag_immed_finish_loop (segP, fragP, &orig_tinsn);
-
if (expanded && is_direct_call_opcode (orig_tinsn.opcode))
{
/* Add an expansion note on the expanded instruction. */
fix_new_exp_in_seg (now_seg, 0, fragP, fr_opcode - fragP->fr_literal, 4,
- &orig_tinsn.tok[0], TRUE,
+ &orig_tinsn.tok[0], true,
BFD_RELOC_XTENSA_ASM_EXPAND);
}
}
segT seg = now_seg;
subsegT subseg = now_subseg;
- assert (new_seg != 0);
+ gas_assert (new_seg != 0);
subseg_set (new_seg, new_subseg);
new_fix = fix_new_exp (frag, where, size, exp, pcrel, r_type);
}
-/* Relax a loop instruction so that it can span loop >256 bytes.
-
- loop as, .L1
- .L0:
- rsr as, LEND
- wsr as, LBEG
- addi as, as, lo8 (label-.L1)
- addmi as, as, mid8 (label-.L1)
- wsr as, LEND
- isync
- rsr as, LCOUNT
- addi as, as, 1
- .L1:
- <<body>>
- label:
-*/
-
-static void
-convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn)
-{
- TInsn loop_insn;
- TInsn addi_insn;
- TInsn addmi_insn;
- unsigned long target;
- static xtensa_insnbuf insnbuf = NULL;
- unsigned int loop_length, loop_length_hi, loop_length_lo;
- xtensa_isa isa = xtensa_default_isa;
- addressT loop_offset;
- addressT addi_offset = 9;
- addressT addmi_offset = 12;
- fragS *next_fragP;
- int target_count;
-
- if (!insnbuf)
- insnbuf = xtensa_insnbuf_alloc (isa);
-
- /* Get the loop offset. */
- loop_offset = get_expanded_loop_offset (tinsn->opcode);
-
- /* Validate that there really is a LOOP at the loop_offset. Because
- loops are not bundleable, we can assume that the instruction will be
- in slot 0. */
- tinsn_from_chars (&loop_insn, fragP->fr_opcode + loop_offset, 0);
- tinsn_immed_from_frag (&loop_insn, fragP, 0);
-
- assert (xtensa_opcode_is_loop (isa, loop_insn.opcode) == 1);
- addi_offset += loop_offset;
- addmi_offset += loop_offset;
-
- assert (tinsn->ntok == 2);
- if (tinsn->tok[1].X_op == O_constant)
- target = tinsn->tok[1].X_add_number;
- else if (tinsn->tok[1].X_op == O_symbol)
- {
- /* Find the fragment. */
- symbolS *sym = tinsn->tok[1].X_add_symbol;
- assert (S_GET_SEGMENT (sym) == segP
- || S_GET_SEGMENT (sym) == absolute_section);
- target = (S_GET_VALUE (sym) + tinsn->tok[1].X_add_number);
- }
- else
- {
- as_bad (_("invalid expression evaluation type %d"), tinsn->tok[1].X_op);
- target = 0;
- }
-
- loop_length = target - (fragP->fr_address + fragP->fr_fix);
- loop_length_hi = loop_length & ~0x0ff;
- loop_length_lo = loop_length & 0x0ff;
- if (loop_length_lo >= 128)
- {
- loop_length_lo -= 256;
- loop_length_hi += 256;
- }
-
- /* Because addmi sign-extends the immediate, 'loop_length_hi' can be at most
- 32512. If the loop is larger than that, then we just fail. */
- if (loop_length_hi > 32512)
- as_bad_where (fragP->fr_file, fragP->fr_line,
- _("loop too long for LOOP instruction"));
-
- tinsn_from_chars (&addi_insn, fragP->fr_opcode + addi_offset, 0);
- assert (addi_insn.opcode == xtensa_addi_opcode);
-
- tinsn_from_chars (&addmi_insn, fragP->fr_opcode + addmi_offset, 0);
- assert (addmi_insn.opcode == xtensa_addmi_opcode);
-
- set_expr_const (&addi_insn.tok[2], loop_length_lo);
- tinsn_to_insnbuf (&addi_insn, insnbuf);
-
- fragP->tc_frag_data.is_insn = TRUE;
- xtensa_insnbuf_to_chars
- (isa, insnbuf, (unsigned char *) fragP->fr_opcode + addi_offset, 0);
-
- set_expr_const (&addmi_insn.tok[2], loop_length_hi);
- tinsn_to_insnbuf (&addmi_insn, insnbuf);
- xtensa_insnbuf_to_chars
- (isa, insnbuf, (unsigned char *) fragP->fr_opcode + addmi_offset, 0);
-
- /* Walk through all of the frags from here to the loop end
- and mark them as no_transform to keep them from being modified
- by the linker. If we ever have a relocation for the
- addi/addmi of the difference of two symbols we can remove this. */
-
- target_count = 0;
- for (next_fragP = fragP; next_fragP != NULL;
- next_fragP = next_fragP->fr_next)
- {
- next_fragP->tc_frag_data.is_no_transform = TRUE;
- if (next_fragP->tc_frag_data.is_loop_target)
- target_count++;
- if (target_count == 2)
- break;
- }
-}
-
\f
/* A map that keeps information on a per-subsegment basis. This is
maintained during initial assembly, but is invalid once the
static subseg_map *
add_subseg_info (segT seg, subsegT subseg)
{
- subseg_map *subseg_e = (subseg_map *) xmalloc (sizeof (subseg_map));
+ subseg_map *subseg_e = XNEW (subseg_map);
memset (subseg_e, 0, sizeof (subseg_map));
subseg_e->seg = seg;
subseg_e->subseg = subseg;
set_last_insn_flags (segT seg,
subsegT subseg,
unsigned fl,
- bfd_boolean val)
+ bool val)
{
subseg_map *subseg_e = get_subseg_info (seg, subseg);
if (! subseg_e)
segT literal_section = head->seg;
/* Move the literal section to the front of the section list. */
- assert (literal_section);
+ gas_assert (literal_section);
if (literal_section != stdoutput->sections)
{
bfd_section_list_remove (stdoutput, literal_section);
static void mark_literal_frags (seg_list *);
+static void
+xg_promote_candidate_litpool (struct litpool_seg *lps,
+ struct litpool_frag *lp)
+{
+ fragS *poolbeg;
+ fragS *poolend;
+ symbolS *lsym;
+ char label[10 + 2 * sizeof (fragS *)];
+
+ poolbeg = lp->fragP;
+ lp->priority = 1;
+ poolbeg->fr_subtype = RELAX_LITERAL_POOL_BEGIN;
+ poolend = poolbeg->fr_next;
+ gas_assert (poolend->fr_type == rs_machine_dependent &&
+ poolend->fr_subtype == RELAX_LITERAL_POOL_END);
+ /* Create a local symbol pointing to the
+ end of the pool. */
+ sprintf (label, ".L0_LT_%p", poolbeg);
+ lsym = (symbolS *) local_symbol_make (label, lps->seg, poolend, 0);
+ poolbeg->fr_symbol = lsym;
+ /* Rest is done in xtensa_relax_frag. */
+}
+
+static struct litpool_frag *xg_find_litpool (struct litpool_seg *lps,
+ struct litpool_frag *lpf,
+ addressT addr)
+{
+ struct litpool_frag *lp = lpf->prev;
+
+ gas_assert (lp->fragP);
+
+ while (lp->fragP->fr_subtype == RELAX_LITERAL_POOL_CANDIDATE_BEGIN)
+ {
+ lp = lp->prev;
+ if (lp->fragP == NULL)
+ {
+ /* End of list; have to bite the bullet.
+ Take the nearest. */
+ lp = lpf->prev;
+ break;
+ }
+ /* Does it (conservatively) reach? */
+ if (addr - lp->addr <= 128 * 1024)
+ {
+ if (lp->fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN &&
+ lp->literal_count < MAX_POOL_LITERALS)
+ {
+ /* Found a good one. */
+ break;
+ }
+ else if (lp->prev->fragP &&
+ addr - lp->prev->addr > 128 * 1024 &&
+ lp->prev->literal_count < MAX_POOL_LITERALS)
+ {
+ /* This is still a "candidate" but the next one
+ will be too far away, so revert to the nearest
+ one, convert it and add the jump around. */
+ lp = lpf->prev;
+ break;
+ }
+ }
+ }
+
+ if (lp->literal_count >= MAX_POOL_LITERALS)
+ {
+ lp = lpf->prev;
+ while (lp && lp->fragP && lp->literal_count >= MAX_POOL_LITERALS)
+ {
+ lp = lp->prev;
+ }
+ gas_assert (lp);
+ }
+
+ gas_assert (lp && lp->fragP && lp->literal_count < MAX_POOL_LITERALS);
+ ++lp->literal_count;
+
+ /* Convert candidate and add the jump around. */
+ if (lp->fragP->fr_subtype == RELAX_LITERAL_POOL_CANDIDATE_BEGIN)
+ xg_promote_candidate_litpool (lps, lp);
+
+ return lp;
+}
+
+static bool xtensa_is_init_fini (segT seg)
+{
+ if (!seg)
+ return 0;
+ return strcmp (segment_name (seg), INIT_SECTION_NAME) == 0
+ || strcmp (segment_name (seg), FINI_SECTION_NAME) == 0;
+}
+
+static void
+xtensa_assign_litpool_addresses (void)
+{
+ struct litpool_seg *lps;
+
+ for (lps = litpool_seg_list.next; lps; lps = lps->next)
+ {
+ frchainS *frchP = seg_info (lps->seg)->frchainP;
+ struct litpool_frag *lpf = lps->frag_list.next;
+ addressT addr = 0;
+
+ if (xtensa_is_init_fini (lps->seg))
+ continue;
+
+ for ( ; frchP; frchP = frchP->frch_next)
+ {
+ fragS *fragP;
+ for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next)
+ {
+ if (lpf && fragP == lpf->fragP)
+ {
+ gas_assert(fragP->fr_type == rs_machine_dependent &&
+ (fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN ||
+ fragP->fr_subtype == RELAX_LITERAL_POOL_CANDIDATE_BEGIN));
+ /* Found a litpool location. */
+ lpf->addr = addr;
+ lpf = lpf->next;
+ }
+ if (fragP->fr_type == rs_machine_dependent &&
+ fragP->fr_subtype == RELAX_SLOTS)
+ {
+ int slot;
+ for (slot = 0; slot < MAX_SLOTS; slot++)
+ {
+ fragS *litfrag = fragP->tc_frag_data.literal_frags[slot];
+
+ if (litfrag
+ && litfrag->tc_frag_data.is_literal
+ && !litfrag->tc_frag_data.literal_frag)
+ {
+ /* L32R referring .literal or generated as a result
+ of relaxation. Point its literal to the nearest
+ litpool preferring non-"candidate" positions to
+ avoid the jump-around. */
+
+ struct litpool_frag *lp;
+
+ lp = xg_find_litpool (lps, lpf, addr);
+ /* Take earliest use of this literal to avoid
+ forward refs. */
+ litfrag->tc_frag_data.literal_frag = lp->fragP;
+ }
+ }
+ }
+ addr += fragP->fr_fix;
+ if (fragP->fr_type == rs_fill)
+ addr += fragP->fr_offset;
+ }
+ }
+ }
+}
+
static void
xtensa_move_literals (void)
{
seg_list *segment;
frchainS *frchain_from, *frchain_to;
- fragS *search_frag, *next_frag, *last_frag, *literal_pool, *insert_after;
+ fragS *search_frag, *next_frag, *literal_pool, *insert_after;
fragS **frag_splice;
emit_state state;
segT dest_seg;
fixS *fix, *next_fix, **fix_splice;
sym_list *lit;
+ const char *init_name = INIT_SECTION_NAME;
+ const char *fini_name = FINI_SECTION_NAME;
+ int init_name_len = strlen(init_name);
+ int fini_name_len = strlen(fini_name);
mark_literal_frags (literal_head->next);
if (use_literal_section)
return;
+ /* Assign addresses (rough estimates) to the potential literal pool locations
+ and create new ones if the gaps are too large. */
+
+ xtensa_assign_litpool_addresses ();
+
+ /* Walk through the literal segments. */
for (segment = literal_head->next; segment; segment = segment->next)
{
+ const char *seg_name = segment_name (segment->seg);
+
/* Keep the literals for .init and .fini in separate sections. */
- if (!strcmp (segment_name (segment->seg), INIT_SECTION_NAME)
- || !strcmp (segment_name (segment->seg), FINI_SECTION_NAME))
+ if ((!memcmp (seg_name, init_name, init_name_len) &&
+ !strcmp (seg_name + init_name_len, ".literal")) ||
+ (!memcmp (seg_name, fini_name, fini_name_len) &&
+ !strcmp (seg_name + fini_name_len, ".literal")))
continue;
frchain_from = seg_info (segment->seg)->frchainP;
frchain_to = NULL;
frag_splice = &(frchain_from->frch_root);
- while (!search_frag->tc_frag_data.literal_frag)
+ while (search_frag && !search_frag->tc_frag_data.literal_frag)
{
- assert (search_frag->fr_fix == 0
+ gas_assert (search_frag->fr_fix == 0
|| search_frag->fr_type == rs_align);
search_frag = search_frag->fr_next;
}
- assert (search_frag->tc_frag_data.literal_frag->fr_subtype
+ if (!search_frag)
+ continue;
+
+ gas_assert (search_frag->tc_frag_data.literal_frag->fr_subtype
== RELAX_LITERAL_POOL_BEGIN);
xtensa_switch_section_emit_state (&state, segment->seg, 0);
frags in it. */
frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
- last_frag = frag_now;
frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
while (search_frag != frag_now)
{
next_frag = search_frag->fr_next;
-
- /* First, move the frag out of the literal section and
- to the appropriate place. */
if (search_frag->tc_frag_data.literal_frag)
{
literal_pool = search_frag->tc_frag_data.literal_frag;
- assert (literal_pool->fr_subtype == RELAX_LITERAL_POOL_BEGIN);
+ gas_assert (literal_pool->fr_subtype == RELAX_LITERAL_POOL_BEGIN);
frchain_to = literal_pool->tc_frag_data.lit_frchain;
- assert (frchain_to);
+ gas_assert (frchain_to);
+ }
+
+ if (search_frag->fr_type == rs_fill && search_frag->fr_fix == 0)
+ {
+ /* Skip empty fill frags. */
+ *frag_splice = next_frag;
+ search_frag = next_frag;
+ continue;
+ }
+
+ if (search_frag->fr_type == rs_align)
+ {
+ /* Skip alignment frags, because the pool as a whole will be
+ aligned if used, and we don't want to force alignment if the
+ pool is unused. */
+ *frag_splice = next_frag;
+ search_frag = next_frag;
+ continue;
+ }
+
+ /* First, move the frag out of the literal section and
+ to the appropriate place. */
+
+ /* Insert an alignment frag at start of pool. */
+ if (literal_pool->fr_next->fr_type == rs_machine_dependent &&
+ literal_pool->fr_next->fr_subtype == RELAX_LITERAL_POOL_END)
+ {
+ segT pool_seg = literal_pool->fr_next->tc_frag_data.lit_seg;
+ emit_state prev_state;
+ fragS *prev_frag;
+ fragS *align_frag;
+ xtensa_switch_section_emit_state (&prev_state, pool_seg, 0);
+ prev_frag = frag_now;
+ frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL);
+ align_frag = frag_now;
+ frag_align (2, 0, 0);
+ /* Splice it into the right place. */
+ prev_frag->fr_next = align_frag->fr_next;
+ align_frag->fr_next = literal_pool->fr_next;
+ literal_pool->fr_next = align_frag;
+ /* Insert after this one. */
+ literal_pool->tc_frag_data.literal_frag = align_frag;
+ xtensa_restore_emit_state (&prev_state);
}
insert_after = literal_pool->tc_frag_data.literal_frag;
dest_seg = insert_after->fr_next->tc_frag_data.lit_seg;
+ /* Skip align frag. */
+ if (insert_after->fr_next->fr_type == rs_align)
+ {
+ insert_after = insert_after->fr_next;
+ }
*frag_splice = next_frag;
search_frag->fr_next = insert_after->fr_next;
frchain_from = seg_info (segment->seg)->frchainP;
as_warn (_("fixes not all moved from %s"), segment->seg->name);
- assert (frchain_from->fix_root == NULL);
+ gas_assert (frchain_from->fix_root == NULL);
}
frchain_from->fix_tail = NULL;
xtensa_restore_emit_state (&state);
for (lit = literal_syms; lit; lit = lit->next)
{
symbolS *lit_sym = lit->sym;
- segT dest_seg = symbol_get_frag (lit_sym)->tc_frag_data.lit_seg;
- if (dest_seg)
- S_SET_SEGMENT (lit_sym, dest_seg);
+ segT dseg = symbol_get_frag (lit_sym)->tc_frag_data.lit_seg;
+ if (dseg)
+ S_SET_SEGMENT (lit_sym, dseg);
}
}
search_frag = frchain_from->frch_root;
while (search_frag)
{
- search_frag->tc_frag_data.is_literal = TRUE;
+ search_frag->tc_frag_data.is_literal = true;
search_frag = search_frag->fr_next;
}
segment = segment->next;
segT literal_section = head->seg;
/* Move the literal section after "after". */
- assert (literal_section);
+ gas_assert (literal_section);
if (literal_section != after)
{
bfd_section_list_remove (stdoutput, literal_section);
/* Now perform the final error check. */
for (sec = stdoutput->sections; sec != NULL; sec = sec->next)
new_count++;
- assert (new_count == old_count);
+ gas_assert (new_count == old_count);
}
{
if (directive_state[directive_absolute_literals])
{
- segT lit4_seg = cache_literal_section (TRUE);
+ segT lit4_seg = cache_literal_section (true);
xtensa_switch_section_emit_state (result, lit4_seg, 0);
}
else
static void
xtensa_switch_to_non_abs_literal_fragment (emit_state *result)
{
- static bfd_boolean recursive = FALSE;
fragS *pool_location = get_literal_pool_location (now_seg);
segT lit_seg;
- bfd_boolean is_init =
- (now_seg && !strcmp (segment_name (now_seg), INIT_SECTION_NAME));
- bfd_boolean is_fini =
- (now_seg && !strcmp (segment_name (now_seg), FINI_SECTION_NAME));
+ bool is_init_fini = xtensa_is_init_fini (now_seg);
if (pool_location == NULL
&& !use_literal_section
- && !recursive
- && !is_init && ! is_fini)
+ && !is_init_fini)
{
- as_bad (_("literal pool location required for text-section-literals; specify with .literal_position"));
-
- /* When we mark a literal pool location, we want to put a frag in
- the literal pool that points to it. But to do that, we want to
- switch_to_literal_fragment. But literal sections don't have
- literal pools, so their location is always null, so we would
- recurse forever. This is kind of hacky, but it works. */
-
- recursive = TRUE;
- xtensa_mark_literal_pool_location ();
- recursive = FALSE;
+ if (!auto_litpools)
+ {
+ as_bad (_("literal pool location required for text-section-literals; specify with .literal_position"));
+ }
+ xtensa_maybe_create_literal_pool_frag (true, true);
+ pool_location = get_literal_pool_location (now_seg);
}
- lit_seg = cache_literal_section (FALSE);
+ lit_seg = cache_literal_section (false);
xtensa_switch_section_emit_state (result, lit_seg, 0);
if (!use_literal_section
- && !is_init && !is_fini
+ && !is_init_fini
&& get_literal_pool_location (now_seg) != pool_location)
{
/* Close whatever frag is there. */
/* Predicate function used to look up a section in a particular group. */
-static bfd_boolean
+static bool
match_section_group (bfd *abfd ATTRIBUTE_UNUSED, asection *sec, void *inf)
{
const char *gname = inf;
const char *group_name = elf_group_name (sec);
-
+
return (group_name == gname
|| (group_name != NULL
&& gname != NULL
The result may be cached in the default_lit_sections structure. */
static segT
-cache_literal_section (bfd_boolean use_abs_literals)
+cache_literal_section (bool use_abs_literals)
{
const char *text_name, *group_name = 0;
- char *base_name, *name, *suffix;
+ const char *base_name, *suffix;
+ char *name;
segT *pcached;
segT seg, current_section;
int current_subsec;
- bfd_boolean linkonce = FALSE;
+ bool linkonce = false;
/* Save the current section/subsection. */
current_section = now_seg;
if (*pcached)
return *pcached;
-
+
text_name = default_lit_sections.lit_prefix;
if (! text_name || ! *text_name)
{
base_name = use_abs_literals ? ".lit4" : ".literal";
if (group_name)
{
- name = xmalloc (strlen (base_name) + strlen (group_name) + 2);
- sprintf (name, "%s.%s", base_name, group_name);
+ name = concat (base_name, ".", group_name, (char *) NULL);
}
else if (strncmp (text_name, ".gnu.linkonce.", linkonce_len) == 0)
{
suffix = strchr (text_name + linkonce_len, '.');
- name = xmalloc (linkonce_len + strlen (base_name) + 1
- + (suffix ? strlen (suffix) : 0));
- strcpy (name, ".gnu.linkonce");
- strcat (name, base_name);
- if (suffix)
- strcat (name, suffix);
- linkonce = TRUE;
+ name = concat (".gnu.linkonce", base_name, suffix ? suffix : "",
+ (char *) NULL);
+ linkonce = true;
}
else
{
- /* If the section name ends with ".text", then replace that suffix
- instead of appending an additional suffix. */
+ /* If the section name begins or ends with ".text", then replace
+ that portion instead of appending an additional suffix. */
size_t len = strlen (text_name);
- if (len >= 5 && strcmp (text_name + len - 5, ".text") == 0)
+ if (len >= 5
+ && (strcmp (text_name + len - 5, ".text") == 0
+ || startswith (text_name, ".text")))
len -= 5;
- name = xmalloc (len + strlen (base_name) + 1);
- strcpy (name, text_name);
- strcpy (name + len, base_name);
+ name = XNEWVEC (char, len + strlen (base_name) + 1);
+ if (startswith (text_name, ".text"))
+ {
+ strcpy (name, base_name);
+ strcat (name, text_name + 5);
+ }
+ else
+ {
+ strcpy (name, text_name);
+ strcpy (name + len, base_name);
+ }
}
/* Canonicalize section names to allow renaming literal sections.
if (! use_abs_literals)
{
/* Add the newly created literal segment to the list. */
- seg_list *n = (seg_list *) xmalloc (sizeof (seg_list));
+ seg_list *n = XNEW (seg_list);
n->seg = seg;
n->next = literal_head->next;
literal_head->next = n;
elf_group_name (seg) = group_name;
- bfd_set_section_flags (stdoutput, seg, flags);
- bfd_set_section_alignment (stdoutput, seg, 2);
+ bfd_set_section_flags (seg, flags);
+ bfd_set_section_alignment (seg, 2);
}
*pcached = seg;
#define XTENSA_LIT_SEC_NAME ".xt.lit"
#define XTENSA_PROP_SEC_NAME ".xt.prop"
-typedef bfd_boolean (*frag_predicate) (const fragS *);
+typedef bool (*frag_predicate) (const fragS *);
typedef void (*frag_flags_fn) (const fragS *, frag_flags *);
-static bfd_boolean get_frag_is_literal (const fragS *);
+static bool get_frag_is_literal (const fragS *);
static void xtensa_create_property_segments
(frag_predicate, frag_predicate, const char *, xt_section_type);
static void xtensa_create_xproperty_segments
(frag_flags_fn, const char *, xt_section_type);
-static bfd_boolean section_has_property (segT, frag_predicate);
-static bfd_boolean section_has_xproperty (segT, frag_flags_fn);
+static bool exclude_section_from_property_tables (segT);
+static bool section_has_property (segT, frag_predicate);
+static bool section_has_xproperty (segT, frag_flags_fn);
static void add_xt_block_frags
(segT, xtensa_block_info **, frag_predicate, frag_predicate);
-static bfd_boolean xtensa_frag_flags_is_empty (const frag_flags *);
+static bool xtensa_frag_flags_is_empty (const frag_flags *);
static void xtensa_frag_flags_init (frag_flags *);
static void get_frag_property_flags (const fragS *, frag_flags *);
-static bfd_vma frag_flags_to_number (const frag_flags *);
+static flagword frag_flags_to_number (const frag_flags *);
static void add_xt_prop_frags (segT, xtensa_block_info **, frag_flags_fn);
/* Set up property tables after relaxation. */
/* This function is only meaningful after xtensa_move_literals. */
-static bfd_boolean
+static bool
get_frag_is_literal (const fragS *fragP)
{
- assert (fragP != NULL);
+ gas_assert (fragP != NULL);
return fragP->tc_frag_data.is_literal;
}
seclist = &(*seclist)->next)
{
segT sec = *seclist;
- flagword flags;
- flags = bfd_get_section_flags (stdoutput, sec);
- if (flags & SEC_DEBUGGING)
- continue;
- if (!(flags & SEC_ALLOC))
+ if (exclude_section_from_property_tables (sec))
continue;
if (section_has_property (sec, property_function))
{
segment_info_type *xt_seg_info;
xtensa_block_info **xt_blocks;
- segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+ segT prop_sec = xtensa_make_property_section (sec, section_name_base);
prop_sec->output_section = prop_sec;
subseg_set (prop_sec, 0);
num_recs++;
rec_size = num_recs * 8;
- bfd_set_section_size (stdoutput, sec, rec_size);
+ bfd_set_section_size (sec, rec_size);
if (num_recs)
{
fixS *fix;
/* Write the fixup. */
- assert (cur_block);
+ gas_assert (cur_block);
fix = fix_new (frag_now, i * 8, 4,
section_symbol (cur_block->sec),
cur_block->offset,
- FALSE, BFD_RELOC_32);
+ false, BFD_RELOC_32);
fix->fx_file = "<internal>";
fix->fx_line = 0;
seclist = &(*seclist)->next)
{
segT sec = *seclist;
- flagword flags;
- flags = bfd_get_section_flags (stdoutput, sec);
- if ((flags & SEC_DEBUGGING)
- || !(flags & SEC_ALLOC)
- || (flags & SEC_MERGE))
+ if (exclude_section_from_property_tables (sec))
continue;
if (section_has_xproperty (sec, flag_fn))
{
segment_info_type *xt_seg_info;
xtensa_block_info **xt_blocks;
- segT prop_sec = xtensa_get_property_section (sec, section_name_base);
+ segT prop_sec = xtensa_make_property_section (sec, section_name_base);
prop_sec->output_section = prop_sec;
subseg_set (prop_sec, 0);
num_recs++;
rec_size = num_recs * (8 + 4);
- bfd_set_section_size (stdoutput, sec, rec_size);
+ bfd_set_section_size (sec, rec_size);
/* elf_section_data (sec)->this_hdr.sh_entsize = 12; */
if (num_recs)
fixS *fix;
/* Write the fixup. */
- assert (cur_block);
+ gas_assert (cur_block);
fix = fix_new (frag_now, i * 12, 4,
section_symbol (cur_block->sec),
cur_block->offset,
- FALSE, BFD_RELOC_32);
+ false, BFD_RELOC_32);
fix->fx_file = "<internal>";
fix->fx_line = 0;
cur_block->size, 4);
md_number_to_chars (&frag_data[8 + i * 12],
frag_flags_to_number (&cur_block->flags),
- 4);
+ sizeof (flagword));
cur_block = cur_block->next;
}
frag_wane (frag_now);
}
-static bfd_boolean
+static bool
+exclude_section_from_property_tables (segT sec)
+{
+ flagword flags = bfd_section_flags (sec);
+
+ /* Sections that don't contribute to the memory footprint are excluded. */
+ if ((flags & SEC_DEBUGGING)
+ || !(flags & SEC_ALLOC)
+ || (flags & SEC_MERGE))
+ return true;
+
+ /* Linker cie and fde optimizations mess up property entries for
+ eh_frame sections, but there is nothing inside them relevant to
+ property tables anyway. */
+ if (strcmp (sec->name, ".eh_frame") == 0)
+ return true;
+
+ return false;
+}
+
+
+static bool
section_has_property (segT sec, frag_predicate property_function)
{
segment_info_type *seginfo = seg_info (sec);
{
if (property_function (fragP)
&& (fragP->fr_type != rs_fill || fragP->fr_fix != 0))
- return TRUE;
+ return true;
}
}
- return FALSE;
+ return false;
}
-static bfd_boolean
+static bool
section_has_xproperty (segT sec, frag_flags_fn property_function)
{
segment_info_type *seginfo = seg_info (sec);
frag_flags prop_flags;
property_function (fragP, &prop_flags);
if (!xtensa_frag_flags_is_empty (&prop_flags))
- return TRUE;
+ return true;
}
}
- return FALSE;
+ return false;
}
frag_predicate property_function,
frag_predicate end_property_function)
{
- bfd_vma seg_offset;
fragS *fragP;
/* Build it if needed. */
/* We are either at NULL at the beginning or at the end. */
/* Walk through the frags. */
- seg_offset = 0;
-
if (seg_info (sec)->frchainP)
{
for (fragP = seg_info (sec)->frchainP->frch_root;
}
if (*xt_block == NULL)
{
- xtensa_block_info *new_block = (xtensa_block_info *)
- xmalloc (sizeof (xtensa_block_info));
+ xtensa_block_info *new_block = XNEW (xtensa_block_info);
new_block->sec = sec;
new_block->offset = fragP->fr_address;
new_block->size = fragP->fr_fix;
/* Break the encapsulation of add_xt_prop_frags here. */
-static bfd_boolean
+static bool
xtensa_frag_flags_is_empty (const frag_flags *prop_flags)
{
if (prop_flags->is_literal
|| prop_flags->is_insn
|| prop_flags->is_data
|| prop_flags->is_unreachable)
- return FALSE;
- return TRUE;
+ return false;
+ return true;
}
{
xtensa_frag_flags_init (prop_flags);
if (fragP->tc_frag_data.is_literal)
- prop_flags->is_literal = TRUE;
+ prop_flags->is_literal = true;
if (fragP->tc_frag_data.is_specific_opcode
|| fragP->tc_frag_data.is_no_transform)
{
- prop_flags->is_no_transform = TRUE;
+ prop_flags->is_no_transform = true;
if (xtensa_frag_flags_is_empty (prop_flags))
- prop_flags->is_data = TRUE;
+ prop_flags->is_data = true;
}
if (fragP->tc_frag_data.is_unreachable)
- prop_flags->is_unreachable = TRUE;
+ prop_flags->is_unreachable = true;
else if (fragP->tc_frag_data.is_insn)
{
- prop_flags->is_insn = TRUE;
+ prop_flags->is_insn = true;
if (fragP->tc_frag_data.is_loop_target)
- prop_flags->insn.is_loop_target = TRUE;
+ prop_flags->insn.is_loop_target = true;
if (fragP->tc_frag_data.is_branch_target)
- prop_flags->insn.is_branch_target = TRUE;
+ prop_flags->insn.is_branch_target = true;
if (fragP->tc_frag_data.is_no_density)
- prop_flags->insn.is_no_density = TRUE;
+ prop_flags->insn.is_no_density = true;
if (fragP->tc_frag_data.use_absolute_literals)
- prop_flags->insn.is_abslit = TRUE;
+ prop_flags->insn.is_abslit = true;
}
if (fragP->tc_frag_data.is_align)
{
- prop_flags->is_align = TRUE;
+ prop_flags->is_align = true;
prop_flags->alignment = fragP->tc_frag_data.alignment;
if (xtensa_frag_flags_is_empty (prop_flags))
- prop_flags->is_data = TRUE;
+ prop_flags->is_data = true;
}
}
-static bfd_vma
+static flagword
frag_flags_to_number (const frag_flags *prop_flags)
{
- bfd_vma num = 0;
+ flagword num = 0;
if (prop_flags->is_literal)
num |= XTENSA_PROP_LITERAL;
if (prop_flags->is_insn)
}
-static bfd_boolean
+static bool
xtensa_frag_flags_combinable (const frag_flags *prop_flags_1,
const frag_flags *prop_flags_2)
{
/* Cannot combine with an end marker. */
if (prop_flags_1->is_literal != prop_flags_2->is_literal)
- return FALSE;
+ return false;
if (prop_flags_1->is_insn != prop_flags_2->is_insn)
- return FALSE;
+ return false;
if (prop_flags_1->is_data != prop_flags_2->is_data)
- return FALSE;
+ return false;
if (prop_flags_1->is_insn)
{
/* Properties of the beginning of the frag. */
if (prop_flags_2->insn.is_loop_target)
- return FALSE;
+ return false;
if (prop_flags_2->insn.is_branch_target)
- return FALSE;
+ return false;
if (prop_flags_1->insn.is_no_density !=
prop_flags_2->insn.is_no_density)
- return FALSE;
+ return false;
if (prop_flags_1->is_no_transform !=
prop_flags_2->is_no_transform)
- return FALSE;
+ return false;
if (prop_flags_1->insn.is_no_reorder !=
prop_flags_2->insn.is_no_reorder)
- return FALSE;
+ return false;
if (prop_flags_1->insn.is_abslit !=
prop_flags_2->insn.is_abslit)
- return FALSE;
+ return false;
}
if (prop_flags_1->is_align)
- return FALSE;
+ return false;
- return TRUE;
+ return true;
}
}
-static bfd_boolean
+static bool
xtensa_xt_block_combine (xtensa_block_info *xt_block,
const xtensa_block_info *xt_block_2)
{
if (xt_block->sec != xt_block_2->sec)
- return FALSE;
+ return false;
if (xt_block->offset + xt_block_aligned_size (xt_block)
!= xt_block_2->offset)
- return FALSE;
+ return false;
if (xt_block_2->size == 0
&& (!xt_block_2->flags.is_unreachable
{
/* Nothing needed. */
if (xt_block->flags.alignment >= xt_block_2->flags.alignment)
- return TRUE;
+ return true;
}
else
{
xt_block->flags.is_align = xt_block_2->flags.is_align;
xt_block->flags.alignment = xt_block_2->flags.alignment;
}
- return TRUE;
+ return true;
}
}
if (!xtensa_frag_flags_combinable (&xt_block->flags,
&xt_block_2->flags))
- return FALSE;
+ return false;
xt_block->size += xt_block_2->size;
if (xt_block_2->flags.is_align)
{
- xt_block->flags.is_align = TRUE;
+ xt_block->flags.is_align = true;
xt_block->flags.alignment = xt_block_2->flags.alignment;
}
- return TRUE;
+ return true;
}
xtensa_block_info **xt_block,
frag_flags_fn property_function)
{
- bfd_vma seg_offset;
fragS *fragP;
/* Build it if needed. */
/* We are either at NULL at the beginning or at the end. */
/* Walk through the frags. */
- seg_offset = 0;
-
if (seg_info (sec)->frchainP)
{
for (fragP = seg_info (sec)->frchainP->frch_root; fragP;
xtensa_block_info *new_block;
if ((*xt_block) != NULL)
xt_block = &(*xt_block)->next;
- new_block = (xtensa_block_info *)
- xmalloc (sizeof (xtensa_block_info));
+ new_block = XNEW (xtensa_block_info);
*new_block = tmp_block;
*xt_block = new_block;
}
int slot;
int num_opcodes = xtensa_isa_num_opcodes (isa);
- op_placement_table = (op_placement_info_table)
- xmalloc (sizeof (op_placement_info) * num_opcodes);
- assert (xtensa_isa_num_formats (isa) < MAX_FORMATS);
+ op_placement_table = XNEWVEC (op_placement_info, num_opcodes);
+ gas_assert (xtensa_isa_num_formats (isa) < MAX_FORMATS);
for (opcode = 0; opcode < num_opcodes; opcode++)
{
op_placement_info *opi = &op_placement_table[opcode];
/* FIXME: Make tinsn allocation dynamic. */
- if (xtensa_opcode_num_operands (isa, opcode) >= MAX_INSN_ARGS)
+ if (xtensa_opcode_num_operands (isa, opcode) > MAX_INSN_ARGS)
as_fatal (_("too many operands in instruction"));
opi->narrowest = XTENSA_UNDEFINED;
opi->narrowest_size = 0x7F;
}
-bfd_boolean
+bool
opcode_fits_format_slot (xtensa_opcode opcode, xtensa_format fmt, int slot)
{
return bit_is_set (slot, op_placement_table[opcode].slots[fmt]);
void
istack_init (IStack *stack)
{
- memset (stack, 0, sizeof (IStack));
stack->ninsn = 0;
}
-bfd_boolean
+bool
istack_empty (IStack *stack)
{
return (stack->ninsn == 0);
}
-bfd_boolean
+bool
istack_full (IStack *stack)
{
return (stack->ninsn == MAX_ISTACK);
istack_top (IStack *stack)
{
int rec = stack->ninsn - 1;
- assert (!istack_empty (stack));
+ gas_assert (!istack_empty (stack));
return &stack->insn[rec];
}
istack_push (IStack *stack, TInsn *insn)
{
int rec = stack->ninsn;
- assert (!istack_full (stack));
+ gas_assert (!istack_full (stack));
stack->insn[rec] = *insn;
stack->ninsn++;
}
{
int rec = stack->ninsn;
TInsn *insn;
- assert (!istack_full (stack));
+ gas_assert (!istack_full (stack));
insn = &stack->insn[rec];
tinsn_init (insn);
stack->ninsn++;
istack_pop (IStack *stack)
{
int rec = stack->ninsn - 1;
- assert (!istack_empty (stack));
+ gas_assert (!istack_empty (stack));
stack->ninsn--;
tinsn_init (&stack->insn[rec]);
}
/* Return TRUE if ANY of the operands in the insn are symbolic. */
-static bfd_boolean
+static bool
tinsn_has_symbolic_operands (const TInsn *insn)
{
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
case O_constant:
break;
default:
- return TRUE;
+ return true;
}
}
- return FALSE;
+ return false;
}
-bfd_boolean
+bool
tinsn_has_invalid_symbolic_operands (const TInsn *insn)
{
xtensa_isa isa = xtensa_default_isa;
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
&& insn->opcode != xtensa_const16_opcode))
{
as_bad (_("invalid symbolic operand"));
- return TRUE;
+ return true;
}
}
}
- return FALSE;
+ return false;
}
The relaxation only handles expressions that
boil down to SYMBOL + OFFSET. */
-static bfd_boolean
+static bool
tinsn_has_complex_operands (const TInsn *insn)
{
int i;
int n = insn->ntok;
- assert (insn->insn_type == ITYPE_INSN);
+ gas_assert (insn->insn_type == ITYPE_INSN);
for (i = 0; i < n; ++i)
{
switch (insn->tok[i].X_op)
case O_hi16:
break;
default:
- return TRUE;
+ return true;
}
}
- return FALSE;
+ return false;
}
3) The opcode can be encoded in the specified format and slot.
4) Operands are either O_constant or O_symbol, and all constants fit. */
-static bfd_boolean
+static bool
tinsn_to_slotbuf (xtensa_format fmt,
int slot,
TInsn *tinsn,
{
xtensa_isa isa = xtensa_default_isa;
xtensa_opcode opcode = tinsn->opcode;
- bfd_boolean has_fixup = FALSE;
+ bool has_fixup = false;
int noperands = xtensa_opcode_num_operands (isa, opcode);
int i;
- assert (tinsn->insn_type == ITYPE_INSN);
+ gas_assert (tinsn->insn_type == ITYPE_INSN);
if (noperands != tinsn->ntok)
as_fatal (_("operand number mismatch"));
{
as_bad (_("cannot encode opcode \"%s\" in the given format \"%s\""),
xtensa_opcode_name (isa, opcode), xtensa_format_name (isa, fmt));
- return FALSE;
+ return false;
}
for (i = 0; i < noperands; i++)
{
- expressionS *expr = &tinsn->tok[i];
+ expressionS *exp = &tinsn->tok[i];
int rc;
unsigned line;
- char *file_name;
+ const char *file_name;
uint32 opnd_value;
- switch (expr->X_op)
+ switch (exp->X_op)
{
case O_register:
if (xtensa_operand_is_visible (isa, opcode, i) == 0)
break;
/* The register number has already been checked in
expression_maybe_register, so we don't need to check here. */
- opnd_value = expr->X_add_number;
+ opnd_value = exp->X_add_number;
(void) xtensa_operand_encode (isa, opcode, i, &opnd_value);
rc = xtensa_operand_set_field (isa, opcode, i, fmt, slot, slotbuf,
opnd_value);
case O_constant:
if (xtensa_operand_is_visible (isa, opcode, i) == 0)
break;
- as_where (&file_name, &line);
+ file_name = as_where (&line);
/* It is a constant and we called this function
then we have to try to fit it. */
xtensa_insnbuf_set_operand (slotbuf, fmt, slot, opcode, i,
- expr->X_add_number, file_name, line);
+ exp->X_add_number, file_name, line);
break;
default:
- has_fixup = TRUE;
+ has_fixup = true;
break;
}
}
Return TRUE if there is a symbol in the immediate field. See also the
assumptions listed for tinsn_to_slotbuf. */
-static bfd_boolean
+static bool
tinsn_to_insnbuf (TInsn *tinsn, xtensa_insnbuf insnbuf)
{
static xtensa_insnbuf slotbuf = 0;
static vliw_insn vinsn;
xtensa_isa isa = xtensa_default_isa;
- bfd_boolean has_fixup = FALSE;
+ bool has_fixup = false;
int i;
if (!slotbuf)
/* Check the instruction arguments. Return TRUE on failure. */
-static bfd_boolean
+static bool
tinsn_check_arguments (const TInsn *insn)
{
xtensa_isa isa = xtensa_default_isa;
xtensa_opcode opcode = insn->opcode;
+ xtensa_regfile t1_regfile, t2_regfile;
+ int t1_reg, t2_reg;
+ int t1_base_reg, t1_last_reg;
+ int t2_base_reg, t2_last_reg;
+ char t1_inout, t2_inout;
+ int i, j;
if (opcode == XTENSA_UNDEFINED)
{
as_bad (_("invalid opcode"));
- return TRUE;
+ return true;
}
if (xtensa_opcode_num_operands (isa, opcode) > insn->ntok)
{
as_bad (_("too few operands"));
- return TRUE;
+ return true;
}
if (xtensa_opcode_num_operands (isa, opcode) < insn->ntok)
{
as_bad (_("too many operands"));
- return TRUE;
+ return true;
+ }
+
+ /* Check registers. */
+ for (j = 0; j < insn->ntok; j++)
+ {
+ if (xtensa_operand_is_register (isa, insn->opcode, j) != 1)
+ continue;
+
+ t2_regfile = xtensa_operand_regfile (isa, insn->opcode, j);
+ t2_base_reg = insn->tok[j].X_add_number;
+ t2_last_reg
+ = t2_base_reg + xtensa_operand_num_regs (isa, insn->opcode, j);
+
+ for (i = 0; i < insn->ntok; i++)
+ {
+ if (i == j)
+ continue;
+
+ if (xtensa_operand_is_register (isa, insn->opcode, i) != 1)
+ continue;
+
+ t1_regfile = xtensa_operand_regfile (isa, insn->opcode, i);
+
+ if (t1_regfile != t2_regfile)
+ continue;
+
+ t1_inout = xtensa_operand_inout (isa, insn->opcode, i);
+ t2_inout = xtensa_operand_inout (isa, insn->opcode, j);
+
+ t1_base_reg = insn->tok[i].X_add_number;
+ t1_last_reg = (t1_base_reg
+ + xtensa_operand_num_regs (isa, insn->opcode, i));
+
+ for (t1_reg = t1_base_reg; t1_reg < t1_last_reg; t1_reg++)
+ {
+ for (t2_reg = t2_base_reg; t2_reg < t2_last_reg; t2_reg++)
+ {
+ if (t1_reg != t2_reg)
+ continue;
+
+ if (t1_inout != 'i' && t2_inout != 'i')
+ {
+ as_bad (_("multiple writes to the same register"));
+ return true;
+ }
+ }
+ }
+ }
}
- return FALSE;
+ return false;
}
/* Find the immed. */
tinsn_init (tinsn);
tinsn->insn_type = ITYPE_INSN;
- tinsn->is_specific_opcode = FALSE; /* must not be specific */
+ tinsn->is_specific_opcode = false; /* must not be specific */
tinsn->opcode = xtensa_opcode_decode (isa, fmt, slot, slotbuf);
tinsn->ntok = xtensa_opcode_num_operands (isa, tinsn->opcode);
for (i = 0; i < tinsn->ntok; i++)
if (fragP->tc_frag_data.slot_symbols[slot])
{
opnum = get_relaxable_immed (opcode);
- assert (opnum >= 0);
+ gas_assert (opnum >= 0);
set_expr_symbol_offset (&tinsn->tok[opnum],
fragP->tc_frag_data.slot_symbols[slot],
fragP->tc_frag_data.slot_offsets[slot]);
}
+ tinsn->extra_arg = fragP->tc_frag_data.free_reg[slot];
}
if (v->insnbuf == NULL)
as_fatal (_("out of memory"));
- for (i = 0; i < MAX_SLOTS; i++)
+ for (i = 0; i < config_max_slots; i++)
{
v->slotbuf[i] = xtensa_insnbuf_alloc (isa);
if (v->slotbuf[i] == NULL)
{
int i;
- memset (v, 0, offsetof (vliw_insn, insnbuf));
+ memset (v, 0, offsetof (vliw_insn, slots)
+ + sizeof(TInsn) * config_max_slots);
v->format = XTENSA_UNDEFINED;
v->num_slots = 0;
- v->inside_bundle = FALSE;
+ v->inside_bundle = false;
if (xt_saved_debug_type != DEBUG_NONE)
debug_type = xt_saved_debug_type;
- for (i = 0; i < MAX_SLOTS; i++)
+ for (i = 0; i < config_max_slots; i++)
v->slots[i].opcode = XTENSA_UNDEFINED;
}
-static bfd_boolean
+static void
+xg_copy_vinsn (vliw_insn *dst, vliw_insn *src)
+{
+ memcpy (dst, src,
+ offsetof(vliw_insn, slots) + src->num_slots * sizeof(TInsn));
+ dst->insnbuf = src->insnbuf;
+ memcpy (dst->slotbuf, src->slotbuf, src->num_slots * sizeof(xtensa_insnbuf));
+}
+
+
+static bool
vinsn_has_specific_opcodes (vliw_insn *v)
{
int i;
for (i = 0; i < v->num_slots; i++)
{
if (v->slots[i].is_specific_opcode)
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
{
int i;
xtensa_insnbuf_free (xtensa_default_isa, v->insnbuf);
- for (i = 0; i < MAX_SLOTS; i++)
+ for (i = 0; i < config_max_slots; i++)
xtensa_insnbuf_free (xtensa_default_isa, v->slotbuf[i]);
}
/* Encode a vliw_insn into an insnbuf. Return TRUE if there are any symbolic
operands. See also the assumptions listed for tinsn_to_slotbuf. */
-static bfd_boolean
+static bool
vinsn_to_insnbuf (vliw_insn *vinsn,
char *frag_offset,
fragS *fragP,
- bfd_boolean record_fixup)
+ bool record_fixup)
{
xtensa_isa isa = xtensa_default_isa;
xtensa_format fmt = vinsn->format;
xtensa_insnbuf insnbuf = vinsn->insnbuf;
int slot;
- bfd_boolean has_fixup = FALSE;
+ bool has_fixup = false;
xtensa_format_encode (isa, fmt, insnbuf);
for (slot = 0; slot < vinsn->num_slots; slot++)
{
TInsn *tinsn = &vinsn->slots[slot];
- bfd_boolean tinsn_has_fixup =
+ expressionS *extra_arg = &tinsn->extra_arg;
+ bool tinsn_has_fixup =
tinsn_to_slotbuf (vinsn->format, slot, tinsn,
vinsn->slotbuf[slot]);
xtensa_format_set_slot (isa, fmt, slot,
insnbuf, vinsn->slotbuf[slot]);
+ if (extra_arg->X_op != O_illegal && extra_arg->X_op != O_register)
+ {
+ if (vinsn->num_slots != 1)
+ as_bad (_("TLS relocation not allowed in FLIX bundle"));
+ else if (record_fixup)
+ /* Instructions that generate TLS relocations should always be
+ relaxed in the front-end. If "record_fixup" is set, then this
+ function is being called during back-end relaxation, so flag
+ the unexpected behavior as an error. */
+ as_bad (_("unexpected TLS relocation"));
+ else
+ fix_new (fragP, frag_offset - fragP->fr_literal,
+ xtensa_format_length (isa, fmt),
+ extra_arg->X_add_symbol, extra_arg->X_add_number,
+ false, map_operator_to_reloc (extra_arg->X_op, false));
+ }
if (tinsn_has_fixup)
{
int i;
xtensa_opcode opcode = tinsn->opcode;
int noperands = xtensa_opcode_num_operands (isa, opcode);
- has_fixup = TRUE;
+ has_fixup = true;
for (i = 0; i < noperands; i++)
{
- expressionS* expr = &tinsn->tok[i];
- switch (expr->X_op)
+ expressionS* exp = &tinsn->tok[i];
+ switch (exp->X_op)
{
case O_symbol:
case O_lo16:
|| tinsn->is_specific_opcode
|| !xg_is_relaxable_insn (tinsn, 0))
{
- xg_add_opcode_fix (tinsn, i, fmt, slot, expr, fragP,
+ xg_add_opcode_fix (tinsn, i, fmt, slot, exp, fragP,
frag_offset - fragP->fr_literal);
}
else
{
- if (expr->X_op != O_symbol)
+ if (exp->X_op != O_symbol)
as_bad (_("invalid operand"));
- tinsn->symbol = expr->X_add_symbol;
- tinsn->offset = expr->X_add_number;
+ tinsn->symbol = exp->X_add_symbol;
+ tinsn->offset = exp->X_add_number;
}
}
else
/* Return TRUE if the expression is an integer constant. */
-bfd_boolean
+bool
expr_is_const (const expressionS *s)
{
return (s->X_op == O_constant);
offsetT
get_expr_const (const expressionS *s)
{
- assert (expr_is_const (s));
+ gas_assert (expr_is_const (s));
return s->X_add_number;
}
}
-bfd_boolean
+bool
expr_is_register (const expressionS *s)
{
return (s->X_op == O_register);
offsetT
get_expr_register (const expressionS *s)
{
- assert (expr_is_register (s));
+ gas_assert (expr_is_register (s));
return s->X_add_number;
}
/* Return TRUE if the two expressions are equal. */
-bfd_boolean
+bool
expr_is_equal (expressionS *s1, expressionS *s2)
{
if (s1->X_op != s2->X_op)
- return FALSE;
+ return false;
if (s1->X_add_symbol != s2->X_add_symbol)
- return FALSE;
+ return false;
if (s1->X_op_symbol != s2->X_op_symbol)
- return FALSE;
+ return false;
if (s1->X_add_number != s2->X_add_number)
- return FALSE;
- return TRUE;
+ return false;
+ return true;
}
struct rename_section_struct
{
- char *old_name;
+ const char *old_name;
char *new_name;
struct rename_section_struct *next;
};
}
/* Now add it. */
- r = (struct rename_section_struct *)
- xmalloc (sizeof (struct rename_section_struct));
+ r = XNEW (struct rename_section_struct);
r->old_name = xstrdup (old_name);
r->new_name = xstrdup (new_name);
r->next = section_rename;
char *
-xtensa_section_rename (char *name)
+xtensa_section_rename (const char *name)
{
struct rename_section_struct *r = section_rename;
return r->new_name;
}
- return name;
+ return (char *) name;
}