dnl
dnl
dnl v2.5 needed for --bindir et al
-AC_PREREQ(2.5)
+AC_PREREQ(2.13)
AC_INIT(as.h)
AC_CANONICAL_SYSTEM
-AM_INIT_AUTOMAKE(gas, 2.8.2)
+AM_INIT_AUTOMAKE(gas, 2.9.5)
AM_PROG_LIBTOOL
*) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
esac])dnl
+using_cgen=no
+
# Generate a header file
AM_CONFIG_HEADER(config.h:config.in)
+# If we are on a DOS filesystem, we must use gdb.ini rather than
+# .gdbinit.
+GDBINIT=".gdbinit"
+case "${host}" in
+ *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
+ GDBINIT="gdb.ini"
+ ;;
+esac
+AC_SUBST(GDBINIT)
+
te_file=generic
+# Makefile target for installing gas in $(tooldir)/bin.
+install_tooldir=install-exec-tooldir
+
canon_targets=""
if test -n "$enable_targets" ; then
for t in `echo $enable_targets | sed 's/,/ /g'`; do
- result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $t 2>/dev/null`
+ result=`$ac_config_sub $t 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
# else
arch=
endian=
case ${cpu} in
+ alpha*) cpu_type=alpha ;;
armeb) cpu_type=arm endian=big ;;
arm*) cpu_type=arm endian=little ;;
+ armb*) cpu_type=arm endian=little ;;
+ armv*l) cpu_type=arm endian=little ;;
+ armv*b) cpu_type=arm endian=big ;;
+ strongarm*) cpu_type=arm endian=little ;;
thumb*) cpu_type=arm endian=little ;;
hppa*) cpu_type=hppa ;;
changequote(,)dnl
i[456]86) cpu_type=i386 ;;
m680[012346]0) cpu_type=m68k ;;
+changequote([,])dnl
m68008) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
-changequote([,])dnl
+ m5200) cpu_type=m68k ;;
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little ;;
- mips*5900*) cpu_type=mips endian=little ;;
mips*) cpu_type=mips endian=big ;;
+ pjl*) cpu_type=pj endian=little ;;
+ pj*) cpu_type=pj endian=big ;;
powerpcle*) cpu_type=ppc endian=little ;;
powerpc*) cpu_type=ppc endian=big ;;
rs6000*) cpu_type=ppc ;;
sparclite*) cpu_type=sparc arch=sparclite ;;
sparclet*) cpu_type=sparc arch=sparclet ;;
- sparc64*) cpu_type=sparc arch=v9 ;;
+ sparc64*) cpu_type=sparc arch=v9-64 ;;
+ sparc86x*) cpu_type=sparc arch=sparc86x ;;
sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
v850*) cpu_type=v850 ;;
*) cpu_type=${cpu} ;;
if test ${this_target} = $target ; then
target_cpu_type=${cpu_type}
- if test x${endian} = xbig; then
- AC_DEFINE(TARGET_BYTES_BIG_ENDIAN, 1)
- elif test x${endian} = xlittle; then
- AC_DEFINE(TARGET_BYTES_BIG_ENDIAN, 0)
- fi
elif test ${target_cpu_type} != ${cpu_type} ; then
continue
fi
a29k-nyu-sym1) fmt=coff ;;
a29k-*-vxworks*) fmt=coff ;;
- alpha-*-*vms*) fmt=evax ;;
- alpha-*-netware*) fmt=ecoff ;;
- alpha-*-openbsd*) fmt=ecoff ;;
- alpha-*-osf*) fmt=ecoff ;;
- alpha-*-linuxecoff*) fmt=ecoff ;;
- alpha-*-linux*) fmt=elf em=linux ;;
+ alpha*-*-*vms*) fmt=evax ;;
+ alpha*-*-netware*) fmt=ecoff ;;
+ alpha*-*-openbsd*) fmt=ecoff ;;
+ alpha*-*-osf*) fmt=ecoff ;;
+ alpha*-*-linuxecoff*) fmt=ecoff ;;
+ alpha*-*-linux-gnu*) fmt=elf em=linux ;;
+ alpha*-*-netbsd*) fmt=elf em=nbsd ;;
arc-*-elf*) fmt=elf bfd_gas=yes ;;
- arm-*-riscix*) fmt=aout em=riscix ;;
- arm-*-aout) fmt=aout ;;
- arm-*-coff | thumb-*-coff) fmt=coff ;;
- arm-*-riscix*) fmt=aout ;;
- arm-*-pe) fmt=coff em=pe ;;
+ arm-*-aout) fmt=aout ;;
+ arm-*-coff | thumb-*-coff) fmt=coff ;;
+ arm-*-elf | thumb-*-elf) fmt=elf ;;
+ arm-*-linux*aout*) fmt=aout em=linux ;;
+ arm-*-linux* | armv*-*-linux-gnu) fmt=elf em=linux ;;
+ arm-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ arm-*-oabi | thumb-*-oabi) fmt=elf ;;
+ arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;;
+ arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
+ arm-*-riscix*) fmt=aout em=riscix ;;
d10v-*-*) fmt=elf bfd_gas=yes ;;
-# start-sanitize-d30v
d30v-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-d30v
+
+
+ fr30-*-*) fmt=elf bfd_gas=yes ;;
hppa-*-*elf*) fmt=elf em=hppa ;;
+ hppa-*-linux-gnu*) fmt=elf em=hppa ;;
hppa-*-lites*) fmt=elf em=hppa ;;
hppa-*-osf*) fmt=som em=hppa ;;
hppa-*-rtems*) fmt=elf em=hppa ;;
hppa-*-hpux*) fmt=som em=hppa ;;
+ hppa-*-mpeix*) fmt=som em=hppa ;;
hppa-*-bsd*) fmt=som em=hppa ;;
hppa-*-hiux*) fmt=som em=hppa ;;
i386-ibm-aix*) fmt=coff em=i386aix ;;
i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
+ i386-*-beospe*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-beoself* | i386-*-beos*) fmt=elf bfd_gas=yes ;;
i386-*-bsd*) fmt=aout em=386bsd ;;
i386-*-netbsd0.8) fmt=aout em=386bsd ;;
i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux*) fmt=elf em=linux ;;
+ i386-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
i386-*-lynxos*) fmt=coff em=lynx ;;
- i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
- fmt=elf ;;
- i386-*-sco*elf*) fmt=elf
+ i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
+ fmt=elf bfd_gas=yes ;;
+ i386-*-freebsdaout* | i386-*-freebsd[12].* | i386-*-freebsd[12])
+ fmt=aout em=386bsd ;;
+ i386-*-freebsd*) fmt=elf bfd_gas=yes ;;
+ i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*)
+ fmt=coff ;;
+ i386-*-sco3.2v5*) fmt=elf
if test ${this_target} = $target; then
- AC_DEFINE(SCO_ELF)
+ AC_DEFINE(SCO_ELF, 1,
+ [Define if defaulting to ELF on SCO 5.])
fi
;;
- i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
- fmt=coff ;;
+ i386-*-sco3.2*) fmt=coff ;;
i386-*-vsta) fmt=aout ;;
- i386-*-msdosdjgpp* | i386-*-go32*)
+ i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*)
fmt=coff em=go32;;
+ i386-*-rtemself*) fmt=elf ;;
i386-*-rtems*) fmt=coff ;;
i386-*-gnu*) fmt=elf ;;
i386-*-mach*)
i386-*-msdos*) fmt=aout ;;
i386-*-moss*) fmt=elf ;;
i386-*-pe) fmt=coff em=pe ;;
- i386-*-cygwin32) fmt=coff em=pe bfd_gas=yes ;;
- i386-*-*nt) fmt=coff em=pe ;;
+ i386-*-cygwin*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-interix*) fmt=coff em=interix bfd_gas=yes ;;
+ i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-*nt*) fmt=coff em=pe ;;
+ i386-*-vxworks*) fmt=aout ;;
i960-*-bout) fmt=bout ;;
i960-*-coff) fmt=coff em=ic960 ;;
i960-*-rtems*) fmt=coff em=ic960 ;;
i960-*-vxworks5.0) fmt=bout ;;
i960-*-vxworks5.*) fmt=coff em=ic960 ;;
i960-*-vxworks*) fmt=bout ;;
+ i960-*-elf*) fmt=elf ;;
m32r-*-*) fmt=elf bfd_gas=yes ;;
fmt=coff ;;
m68k-*-hpux*) fmt=hp300 em=hp300 ;;
m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux*) fmt=elf em=linux ;;
+ m68k-*-linux-gnu*) fmt=elf em=linux ;;
+ m68k-*-gnu*) fmt=elf ;;
m68k-*-lynxos*) fmt=coff em=lynx ;;
m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
m88k-motorola-sysv3*) fmt=coff em=delt88 ;;
m88k-*-coff*) fmt=coff ;;
+ mcore-*-elf) fmt=elf bfd_gas=yes ;;
+ mcore-*-pe) fmt=coff em=pe bfd_gas=yes ;;
+
# don't change em like *-*-bsd does
mips-dec-netbsd*) fmt=elf endian=little ;;
mips-dec-openbsd*) fmt=elf endian=little ;;
- mips-dec-bsd*) fmt=aout ;;
+ mips-dec-bsd*) fmt=aout endian=little ;;
mips-sony-bsd*) fmt=ecoff ;;
mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
mips-*-ultrix*) fmt=ecoff endian=little ;;
mips-*-lnews*) fmt=ecoff em=lnews ;;
mips-*-riscos*) fmt=ecoff ;;
mips-*-sysv*) fmt=ecoff ;;
- mips-*-elf* | mips-*-rtems* | mips-*-linux* | mips-*-gnu* | mips-*-openbsd*)
+ mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*)
fmt=elf ;;
+ mips-*-vxworks*) fmt=elf
+ AC_DEFINE(MIPS_STABS_ELF, 1,
+ [Use ELF stabs for MIPS, not ECOFF stabs])
+ ;;
mn10200-*-*) fmt=elf bfd_gas=yes ;;
mn10300-*-*) fmt=elf bfd_gas=yes ;;
- ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
+ pj*) fmt=elf ;;
+ ppc-*-pe | ppc-*-cygwin* | ppc-*-winnt*)
fmt=coff em=pe ;;
ppc-*-aix*) fmt=coff ;;
ppc-*-beos*) fmt=coff ;;
ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
fmt=elf ;;
- ppc-*-linux*) fmt=elf
+ ppc-*-linux-gnu*) fmt=elf
case "$endian" in
big) ;;
- *) AC_MSG_ERROR(Linux must be configured big endian) ;;
+ *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
esac
;;
ppc-*-solaris*) fmt=elf
if test ${this_target} = $target; then
- AC_DEFINE(TARGET_SOLARIS_COMMENT)
+ AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
+ [Define if default target is PowerPC Solaris.])
fi
if test x${endian} = xbig; then
AC_MSG_ERROR(Solaris must be configured little endian)
ppc-*-macos* | ppc-*-mpw*)
fmt=coff em=macos ;;
ppc-*-netware*) fmt=elf em=ppcnw ;;
+ ppc-*-vxworks*) fmt=elf ;;
sh-*-elf*) fmt=elf ;;
sh-*-coff*) fmt=coff ;;
- sh-*-rtems*) fmt=elf ;;
+ sh-*-rtemself*) fmt=elf ;;
+ sh-*-rtems*) fmt=coff ;;
ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
fmt=aout em=sparcaout ;;
sparc-*-coff) fmt=coff ;;
sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux*) fmt=elf em=linux ;;
+ sparc-*-linux-gnu*) fmt=elf em=linux ;;
sparc-*-lynxos*) fmt=coff em=lynx ;;
sparc-fujitsu-none) fmt=aout ;;
sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
fmt=elf ;;
- sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- sparc-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ sparc-*-netbsd*) fmt=aout em=nbsd ;;
+ sparc-*-openbsd*) fmt=aout em=nbsd ;;
+
+ strongarm-*-coff) fmt=coff ;;
+ strongarm-*-elf) fmt=elf ;;
-# start-sanitize-tic80
+ tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
+ tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
tic80-*-*) fmt=coff ;;
-# end-sanitize-tic80
- v850-*-*) fmt=elf bfd_gas=yes ;;
-# start-sanitize-v850e
+ v850-*-*) fmt=elf bfd_gas=yes ;;
v850e-*-*) fmt=elf bfd_gas=yes ;;
- v850eq-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-v850e
+ v850ea-*-*) fmt=elf bfd_gas=yes ;;
+
vax-*-bsd* | vax-*-ultrix*)
fmt=aout ;;
vax-*-vms) fmt=vms ;;
+
z8k-*-coff | z8k-*-sim)
fmt=coff ;;
*-*-netware) fmt=elf ;;
esac
+ if test ${this_target} = $target ; then
+ endian_def=
+ if test x${endian} = xbig; then
+ endian_def=1
+ elif test x${endian} = xlittle; then
+ endian_def=0
+ fi
+ if test x${endian_def} != x; then
+ AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def,
+ [Define as 1 if big endian.])
+ fi
+ fi
+
case ${cpu_type}-${fmt} in
- alpha-*) bfd_gas=yes ;;
+ alpha*-*) bfd_gas=yes ;;
arm-*) bfd_gas=yes ;;
# not yet
# i386-aout) bfd_gas=preferred ;;
ns32k-*) bfd_gas=yes ;;
ppc-*) bfd_gas=yes ;;
sparc-*) bfd_gas=yes ;;
+ strongarm-*) bfd_gas=yes ;;
*-elf) bfd_gas=yes ;;
*-ecoff) bfd_gas=yes ;;
*-som) bfd_gas=yes ;;
+ #enable bfd for coff to allow testing if a bfd target is the primary target,
+ #but not for coff as the primary target
+ i386-coff) if test x${primary_bfd_gas} = xyes; then bfd_gas=yes; fi ;;
*) ;;
esac
# Other random stuff.
- # do we need the opcodes library?
+ # Do we need the opcodes library?
case ${cpu_type} in
- vax | i386)
+ vax | i386 | tic30)
;;
+
*)
need_opcodes=yes
+
+ case "${enable_shared}" in
+ yes) shared_opcodes=true ;;
+ *opcodes*) shared_opcodes=true ;;
+ *) shared_opcodes=false ;;
+ esac
if test "${shared_opcodes}" = "true"; then
# A shared libopcodes must be linked against libbfd.
need_bfd=yes
;;
esac
+ # Any other special object files needed ?
case ${cpu_type} in
- m32r)
- case ${extra_objects} in
- *cgen.o*) ;;
- *) extra_objects="$extra_objects cgen.o"
- AC_DEFINE(USING_CGEN)
- ;;
- esac
+ fr30 | m32r)
+ using_cgen=yes
;;
m68k)
;;
sparc)
- AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}")
+ if test $this_target = $target ; then
+ AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
+ fi
;;
-
*)
;;
esac
+ if test $using_cgen = yes ; then
+ case "x${extra_objects}" in
+ *cgen.o*) ;;
+ *) extra_objects="$extra_objects cgen.o" ;;
+ esac
+ fi
+
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
case ${generic_target}-${fmt} in
mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- mips-*-linux*-*) case "$endian" in
+ mips-*-linux-gnu*-*) case "$endian" in
big) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
*) emulation="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
esac ;;
mips-*-*-elf) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
- # Uncommenting the next line will turn on support for i386 COFF
- # in any i386 ELF configuration. This probably doesn't work
- # correctly.
- # i386-*-*-elf) emulation="i386coff i386elf" ;;
esac ;;
+ i386-*-elf) emulation="i386elf" ;;
+ i386-*-coff) emulation="i386coff" ;;
+ # Uncommenting the next line will turn on support for i386 COFF
+ # in any i386 ELF configuration.
+ # i386-*-*-elf) emulation="i386elf i386coff" ;;
esac
emulations="$emulations $emulation"
"") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
esac
+# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU).
+cgen_cpu_prefix=""
+if test $using_cgen = yes ; then
+ case ${target_cpu} in
+ *) cgen_cpu_prefix=${target_cpu} ;;
+ esac
+ AC_SUBST(cgen_cpu_prefix)
+ AC_DEFINE(USING_CGEN, 1, [Using cgen code?])
+fi
+
dnl
dnl Make sure the desired support files exist.
dnl
case ${obj_format} in
coff)
case ${target_cpu_type} in
- i386) AC_DEFINE(I386COFF) ;;
- m68k) AC_DEFINE(M68KCOFF) ;;
- m88k) AC_DEFINE(M88KCOFF) ;;
+ i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
+ m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;;
+ m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;;
esac
;;
esac
if test `set . $formats ; shift ; echo $#` -gt 1 ; then
for fmt in $formats ; do
case $fmt in
- aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
- bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
- coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
- ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
- elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
- generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
- hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
- ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
- som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
- vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
+ aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;;
+ bout) AC_DEFINE(OBJ_MAYBE_BOUT, 1, [b.out support?]) ;;
+ coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;;
+ ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;;
+ elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;;
+ generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;;
+ hp300) AC_DEFINE(OBJ_MAYBE_HP300, 1, [HP300 support?]) ;;
+ ieee) AC_DEFINE(OBJ_MAYBE_IEEE, 1, [IEEE support?]) ;;
+ som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;;
+ vms) AC_DEFINE(OBJ_MAYBE_VMS, 1, [VMS support?]) ;;
esac
extra_objects="$extra_objects obj-$fmt.o"
done
obj_format=multi
fi
if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
- te_file=multi
- extra_objects="$extra_objects $emfiles"
DEFAULT_EMULATION=`set . $emulations ; echo $2`
- AC_DEFINE(USE_EMULATIONS)
+ # e-mips* has more than one emulation per file, e-i386* has just one at the
+ # moment. If only one emulation is specified, then don't define
+ # USE_EMULATIONS or include any of the e-files as they will only be bloat.
+ case "${obj_format}${emfiles}" in
+ multi* | *mips*)
+ te_file=multi
+ extra_objects="$extra_objects $emfiles"
+ AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;;
+ esac
fi
AC_SUBST(extra_objects)
-AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
-AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
+AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.])
+AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION",
+ [Default emulation.])
case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
yes-*-coff) need_bfd=yes ;;
no-*-coff) need_bfd=yes
- AC_DEFINE(MANY_SEGMENTS) ;;
+ AC_DEFINE(MANY_SEGMENTS, 1, [old COFF support?]) ;;
esac
reject_dev_configs=yes
AC_SUBST(target_cpu_type)
AC_SUBST(obj_format)
AC_SUBST(te_file)
+AC_SUBST(install_tooldir)
AC_SUBST(atof)
dnl AC_SUBST(emulation)
case "${primary_bfd_gas}" in
- yes) AC_DEFINE(BFD_ASSEMBLER)
+ yes) AC_DEFINE(BFD_ASSEMBLER, 1, [Use BFD interface?])
need_bfd=yes ;;
esac
AC_SUBST(ALL_OBJ_DEPS)
-AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
-AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
-AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
-AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
-AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
+AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.])
+AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.])
+AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.])
+AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.])
+AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.])
AC_PROG_CC
-AC_PROG_INSTALL
AC_PROG_YACC
-AC_PROG_LEX
-AC_DECL_YYTEXT
+AM_PROG_LEX
+
+ALL_LINGUAS=
+CY_GNU_GETTEXT
AM_MAINTAINER_MODE
-AM_CYGWIN32
-AM_EXEEXT
+AC_EXEEXT
AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
cross_gas=no
else
cross_gas=yes
- AC_DEFINE(CROSS_COMPILE)
+ AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?])
fi
AC_MSG_RESULT($cross_gas)
GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
# Does errno.h declare errno, or do we have to add a separate declaration
# for it?
dnl the old symlinks don't exist, so that a reconfigure in an existing
dnl directory behaves reasonably.
-AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in,
+AC_OUTPUT(Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in,
[rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
echo '#include "te-'"${te_file}"'.h"' > targ-env.h
echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
- case ${target_cpu_type} in
- m32r) echo '#include "opcodes/'"${target_cpu_type}"'-opc.h"' > cgen-opc.h ;;
- esac],
+ if test "x$cgen_cpu_prefix" != x ; then
+ echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
+ fi
+
+ sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile],
[target_cpu_type=${target_cpu_type}
+ cgen_cpu_prefix=${cgen_cpu_prefix}
obj_format=${obj_format}
te_file=${te_file}])