+1999-11-01 Michael Snyder <msnyder@cygnus.com>
+ Tom Tromey <tromey@cygnus.com>
+
+ * tracepoint.h (get_tracepoint_by_number): Updated declaration.
+ * tracepoint.c (get_tracepoint_by_number): Added `multi_p'
+ argument. Now uses get_number_or_range and get_number.
+ (trace_pass_command): Allow a tracepoint range.
+ * breakpoint.h (get_number, get_number_or_range): Declare.
+ * breakpoint.c (get_number_trailer): New function.
+ (get_number): Rewrote to use get_number_trailer.
+ (get_number_or_range): New function.
+ (condition_command): Check `get_number' return value.
+ (commands_command): Likewise.
+ (ignore_command): Likewise.
+ (map_breakpoint_numbers): Use get_number_or_range.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * remote-rdi.c (_initialize_remote_rdi): Make log commands
+ subcommands of maintenance. Remove improper identation from
+ command documentation.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * rdi-share/etherdrv.c (fetch_ports): Print out additional TCP/IP
+ port information in ethernet driver if the DEBUG flag is set.
+ * rdi-share/hostchan.c (Adp_addToQueue): Changed #if statement in
+ hostchan.c to avoid compiler complaint when DEBUG macro was
+ undefined.
+ * rdi-share/unixcomm.c (Unix_ReadSerial): Print system error code
+ if read() system call fails.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * rdi-share/bytesex.h: Deleted. Conflicts with a system header file
+ on some systems like Linux Red Hat 5.2.
+ * rdi-share/angel_bytesex.h: New file. Replaces the above.
+ * rdi-share/bytesex.c: Deleted. Name changed to match the header
+ mentioned above (this is the implementation file).
+ * rdi-share/angel_bytesex.c: New file. Replaces the above.
+ * rdi-share/Makefile.am: Reflect above changes.
+ * rdi-share/Makefile.in: Reflect above changes.
+
+1999-11-01 Jimmy Guo <guo@cup.hp.com>
+
+ * annotate.c (breakpoints_changed, annotate_ignore_count_change,
+ annotate_stopped): Provide annotation for breakpoint ignore_count
+ changes but only provide once at annotate_stopped time for
+ sucessive ignore_count triggered breakpoint changes, to make GUIs
+ happy yet lazy.
+ * annotate.h (annotate_ignore_count_change): Declare.
+ * breakpoint.c (bpstat_stop_status): Call
+ annotate_ignore_count_change when ignore_count changes.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * rdi-share/ardi.c (HandleStoppedMessage): Changed code that
+ handles the "stop" message so that unrecognized errors are
+ returned as "Error" rather than "NoError". The old code resulted
+ in some error conditions not being reported to the user.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * remote-rdi.c (arm_rdi_open): Added a call to Adp_CloseDevice()
+ before attempting to open a connection. This allows the user to
+ issue the "target rdi" command multiple times (in case the user
+ needs to change options or re-initialize the link).
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * rdi-share/endian.h: Deleted. Name clash with
+ /usr/include/endian.h. This was causing the wrong byte order to
+ be used by htons() in the RDI Ethernet driver.
+ * rdi-share/angel_endian.h: New file. Replaces the above.
+ * rdi-share/ardi.c: Replace include to reflect the above change.
+ * rdi-share/etherdrv.c: Ditto.
+ * rdi-share/hsys.c: Ditto.
+ * rdi-share/msgbuild.c: Ditto.
+ * rdi-share/params.c: Ditto.
+ * rdi-share/rx.c: Ditto.
+ * rdi-share/tx.c: Ditto.
+ * rdi-share/Makefile.am: Reflect above changes.
+ * rdi-share/Makefile.in: Reflect above changes.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * remote-rdi.c (_initialize_remote_rdi): Added command
+ rdilogenable. Allows the user to log ADP packets that are
+ exchanged between gdb and the target. Both the raw packets are
+ shown and some minimal decoding is attempted. Default state is
+ disabled.
+ (_initialize_remote_rdi): Added command rdilogfile. Allows the
+ user to specify the filename to which the ADP packet log is to be
+ written. Default state is "rdi.log".
+ (rdilogenable_command): New function. Related to rdilogenable.
+ (rdilogfile_command): New function. Related to rdilogfile.
+ * rdi-share/devsw.c (openLogFile, closeLogFile,
+ DevSW_SetLogEnable, DevSW_SetLogfile, dumpPacket): New
+ functions. Implement logging.
+ (DevSW_Read): Log if requested.
+ (DevSW_Write): Log if requested.
+ * rdi-share/devsw.h: Add prototypes for DevSW_SetLogfile and
+ DevSW_SetLogEnable.
+ * rdi-share/hostchan.c (Adp_SetLogEnable, Adp_SetLogfile): New
+ functions. Related to rdilogenable and rdilogfile.
+ * rdi-share/hostchan.h: Add prototypes for the above functions.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * remote-rdi.c (arm_rdi_open): Added code to split the arguments
+ to the 'target rdi' command at the first space. The first word is
+ passed to Adp_OpenDevice as the device name, the tail is passed as
+ the "arguments" parameter. This allows user specified baud rates
+ -- among other things that still need to be documented [e.g. (gdb)
+ target rdi /dev/ttyS1 19200]. NB: With very limited testing, the
+ ARM Embedded-ICE seems to run at 19.2K (though it is reported to
+ be unreliable above 9600), and the EPI Jeeni seems to run at
+ 38.4K.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * remote-rdi.c (_initialize_remote_rdi): Added the boolean
+ set/show variable rdiromatzero. Should be set to true if the
+ target has ROM at address 0. If true, then gdb will not tell the
+ target to trap fetches to interrupt vectors (which are located at
+ address 0). Using the Angel monitor, attempting to set
+ breakpoints in ROM is an error. Using JTAG debugging of the
+ ARM7TDMI, attempting to set more than two breakpoints in ROM is an
+ error. Default state is false (vectors will be trapped) -- used to
+ be hardwired false.
+
+1999-11-01 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From Grant Edwards <grante@visi.com>:
+ * remote-rdi.c (_initialize_remote_rdi): Added the boolean
+ set/show variable rdiheartbeat. This enables or disables ADP
+ link-check "heartbeat" packets sent by the host to the target.
+ Heartbeat packets can cause both the ARM Embedded-ICE and the EPI
+ Jeeni to malfunction: If a heartbeat packet is received by the
+ target while it is sending a packet, that packet will be aborted,
+ and the ADP protocol engine then gets very confused. Default state
+ is off -- used to hardwired on.
+
+1999-10-29 Kevin Buettner <kevinb@cygnus.com>
+
+ * i386-linux-nat.c (dummy_sse_values): Also define for systems
+ without PTRACE_GETXFPREGS.
+
+1999-10-29 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ Hardware watchpoint fix from Eli Zaretskii <eliz@gnu.org>:
+
+ * breakpoint.c (insert_breakpoints): Fetch the value of the
+ expression we need to watch. If it's a lazy memory lvalue, then
+ we need to fetch it now, before we start the inferior again.
+ (insert_breakpoints, remove_breakpoint, bpstat_stop_status,
+ can_use_hardware_watchpoint): Only those values representing
+ memory we actually fetched need to be watched.
+
+1999-10-29 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * breakpoint.h (bpstat_print): Return 'enum print_stop_action',
+ not 'int'.
+
+1999-10-29 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * acconfig.h: Fix entries for HAVE_STRUCT_SAVE_STATE_T,
+ HAVE_STRUCT_MEMBER_SS_WIDE, and HAVE_PTRACE_GETXFPREGS.
+ * config.h.in: Regenerated.
+
+1999-10-28 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ Fixes for warnings from Andreas Jaeger <aj@suse.de>.
+ * linux-thread.c (linuxthreads_sig_restart,
+ linuxthreads_sig_cancel, linuxthreads_sig_debug): Add missing
+ initializers to avoid gcc warnings.
+ (resume_thread): Add braces as recommended by gcc -Wparentheses.
+ (stop_thread): Likewise.
+ (linuxthreads_wait): Likewise.
+ (linuxthreads_find_trap): Likewise.
+
+1999-10-28 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * infcmd.c: Fix typo.
+
+1999-10-28 Jim Blandy <jimb@zenia.red-bean.com>
+
+ * gdbtypes.c (init_simd_type): The upper bound to
+ create_range_type is inclusive, not exclusive.
+
+ * configure.in: Check for PTRACE_GETXFPREGS, and #define
+ HAVE_PTRACE_GETXFPREGS if we have it.
+ * acconfig.h: Add entry for HAVE_PTRACE_GETXFPREGS.
+ * configure, config.in: Regenerated.
+ * config/i386/tm-linux.h (HAVE_SSE_REGS): #define, iff the
+ configure script #defined HAVE_PTRACE_GETXFPREGS.
+ (REGISTER_VIRTUAL_TYPE): Provide the proper types for the pointer
+ registers and the SSE registers.
+ * i386-linux-nat.c (GETREGS_SUPPLIES, GETFPREGS_SUPPLIES,
+ GETXFPREGS_SUPPLIES): New macros.
+ (have_ptrace_getxfpregs): New variable.
+ (FPREGSET_T_FPREG_ADDR): Renamed from FPREGSET_T_FPREG_OFFSET.
+ (supply_fpregset, convert_to_fpregset): Callers changed.
+ (supply_xfpregset, convert_to_xfpregset, fetch_xfpregs,
+ store_xfpregs, dummy_sse_values): New functions.
+ (fetch_inferior_registers, store_inferior_registers): Use the
+ *_SUPPLIES macros to decide how to fetch a given register. Use
+ {fetch,store}_xfpregs and dummy_sse_values to provide access to
+ the SSE registers, on systems where they are present.
+
+1999-10-28 Kevin Buettner <kevinb@cygnus.com>
+
+ * gdbserver/gdbreplay.c (config.h, errno.h): Include.
+ (perror_with_name): Don't declare sys_nerr, sys_errlist, or errno
+ when STDC_HEADERS is defined.
+ * gdbserver/utils.c (STDC_HEADERS): Likewise.
+
+ * gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
+ gdbserver/low-lynx.c, gdbserver/low-sim.c, gdbserver/low-sparc.c,
+ gdbserver/low-sun3.c (my_registers): Declare.
+ (registers): Changed from array type to pointer type in order
+ to match declaration in inferior.h in main gdb sources.
+ * gdbserver/server.h (registers): Likewise.
+ * gdbserver/remote-utils.c (outreg): Removed declaration of
+ registers[].
+
+ * gdbserver/low-linux.c (fetch_register): Changed PTRACE_PEEKUSR to
+ PTRACE_PEEKUSER. [Note the missing 'E'.]
+ (store_inferior_registers): Likewise for PTRACE_POKEUSER.
+
+ * gdbserver/low-linux.c (sys/ptrace.h): Move include to
+ avoid conflict with #defines coming from <sys/user.h>.
+ (sys/reg.h): Only include when HAVE_SYS_REG_H is defined.
+ (PTRACE_XFER_TYPE): Provide a default type in case
+ the target doesn't define it.
+ (fetch_register, read_inferior_memory, write_inferior_memory):
+ Use PTRACE_XFER_TYPE instead of int for ptrace() transfers.
+ (I386_GNULINUX_TARGET): Use #ifdef with this symbol instead
+ of assuming it's an x86 target when it's not a m68k target.
+ (i386_register_raw_size, i386_register_byte): Define these arrays
+ to match other changes that've been occuring to the x86 target
+ in the main gdb sources.
+ (initialize_arch): New (static) function for doing target arch
+ specific initializations.
+
+ * gdbserver/server.h (MAXBUFBYTES, PBUFSIZ): New defines
+ [actually stolen from remote.c].
+ * gdbserver/remote-utils.c (putpkt): Use PBUFSIZ to make
+ sure that buffer is big enough.
+ * gdbserver/server.c (main): Ditto.
+
+ * gdbserver/remote-utils.c (outreg): Allow register numbers
+ bigger than 255.
+ (prepare_resume_reply): Provide alternate mechanism,
+ GDBSERVER_RESUME_REGS, for defining list of registers to send
+ to gdb.
+ * gdbserver/Makefile.in (INTERNAL_CFLAGS): Swapped order of
+ INCLUDE_CFLAGS and BFD_CFLAGS to ensure that gdb's config.h
+ gets found before bfd's config.h. Also added -DGDBSERVER
+ switch.
+ (INCLUDE_CFLAGS): Added -I.. .
+
+1999-10-27 Nick Clifton <nickc@cygnus.com>
+
+ * arm-tdep.c (THUMB_BE_BREAKPOINT): Change to 0xbebe.
+ (THUMB_LE_BREAKPOINT): Change to 0xbebe.
+
Mon Oct 25 18:22:06 1999 Andrew Cagney <cagney@b1.cygnus.com>
* remote.c: Document future of compare_sections_command.
projects / thirdparty / binutils-gdb.git / blobdiff