-# Copyright (C) 1989-2016 Free Software Foundation, Inc.
+# Copyright (C) 1989-2018 Free Software Foundation, Inc.
# This file is part of GDB.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# Please keep lists in this file sorted alphabetically, with one item per line.
+# Here are the general guidelines for ordering files and directories:
+#
+# - Files come before directories.
+# - The extensions are not taken into account when comparing filenames, except
+# if the filenames are otherwise equal.
+# - A filename that is a prefix of another one comes before.
+# - Underscores and dashes are treated equally, and come before alphanumeric
+# characters.
+#
+# For example:
+#
+# SOME_FILES = \
+# foo.c \
+# foo.h \
+# foo-bar.c \
+# foobar.c \
+# foo/bar.c
+
prefix = @prefix@
exec_prefix = @exec_prefix@
# -traditional flag. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
-CC=@CC@
-CXX=@CXX@
+CC = @CC@
+CXX = @CXX@
+CXX_DIALECT = @CXX_DIALECT@
# Dependency tracking information.
DEPMODE = @CCDEPMODE@
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
-COMPILE.pre = $(CXX)
+COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
COMPILE.post = -c -o $@
COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
POSTCOMPILE = @true
VPATH = @srcdir@
top_srcdir = @top_srcdir@
-YACC=@YACC@
+YACC = @YACC@
# This is used to rebuild ada-lex.c from ada-lex.l. If the program is
# not defined, but ada-lex.c is present, compilation will continue,
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefined references.
-#CC_LD=g++ -static
-CC_LD=$(CXX)
+#CC_LD = g++ -static
+CC_LD = $(CXX) $(CXX_DIALECT)
# Where is our "include" directory? Typically $(srcdir)/../include.
# This is essentially the header file directory for the library
# routines in libiberty.
-INCLUDE_DIR = $(srcdir)/../include
+INCLUDE_DIR = $(srcdir)/../include
INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
# Where is the "-liberty" library? Typically in ../libiberty.
# Where is libipt? This will be empty if libipt was not available.
LIBIPT = @LIBIPT@
+# Where is libmpfr? This will be empty if libmpfr was not available.
+LIBMPFR = @LIBMPFR@
+
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
#
# CLI sub directory definitons
#
-SUBDIR_CLI_OBS = \
- cli-dump.o \
- cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
- cli-logging.o \
- cli-interp.o cli-utils.o
SUBDIR_CLI_SRCS = \
+ cli/cli-cmds.c \
+ cli/cli-decode.c \
cli/cli-dump.c \
- cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
+ cli/cli-interp.c \
cli/cli-logging.c \
- cli/cli-interp.c cli/cli-utils.c
+ cli/cli-script.c \
+ cli/cli-setshow.c \
+ cli/cli-utils.c
+
+SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
+
SUBDIR_CLI_DEPS =
-SUBDIR_CLI_LDFLAGS=
-SUBDIR_CLI_CFLAGS=
+SUBDIR_CLI_LDFLAGS =
+SUBDIR_CLI_CFLAGS =
#
# MI sub directory definitons
#
-SUBDIR_MI_OBS = \
- mi-out.o mi-console.o \
- mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
- mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
- mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
- mi-cmd-info.o mi-interp.o \
- mi-main.o mi-parse.o mi-getopt.o
SUBDIR_MI_SRCS = \
- mi/mi-out.c mi/mi-console.c \
- mi/mi-cmds.c mi/mi-cmd-catch.c mi/mi-cmd-env.c \
- mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
- mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
- mi/mi-cmd-target.c mi/mi-cmd-info.c mi/mi-interp.c \
- mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
+ mi/mi-cmd-break.c \
+ mi/mi-cmd-catch.c \
+ mi/mi-cmd-disas.c \
+ mi/mi-cmd-env.c \
+ mi/mi-cmd-file.c \
+ mi/mi-cmd-info.c \
+ mi/mi-cmd-stack.c \
+ mi/mi-cmd-target.c \
+ mi/mi-cmd-var.c \
+ mi/mi-cmds.c \
+ mi/mi-console.c \
+ mi/mi-getopt.c \
+ mi/mi-interp.c \
+ mi/mi-main.c \
+ mi/mi-out.c \
+ mi/mi-parse.c \
+ mi/mi-symbol-cmds.c
+
+SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
+
SUBDIR_MI_DEPS =
-SUBDIR_MI_LDFLAGS=
-SUBDIR_MI_CFLAGS=
+SUBDIR_MI_LDFLAGS =
+SUBDIR_MI_CFLAGS =
#
# TUI sub directory definitions
#
-
-SUBDIR_TUI_OBS = \
- tui-command.o \
- tui-data.o \
- tui-disasm.o \
- tui-file.o \
- tui-hooks.o \
- tui-interp.o \
- tui-io.o \
- tui-layout.o \
- tui-out.o \
- tui-regs.o \
- tui-source.o \
- tui-stack.o \
- tui-win.o \
- tui-windata.o \
- tui-wingeneral.o \
- tui-winsource.o \
- tui.o
-
SUBDIR_TUI_SRCS = \
+ tui/tui.c \
tui/tui-command.c \
tui/tui-data.c \
tui/tui-disasm.c \
tui/tui-win.c \
tui/tui-windata.c \
tui/tui-wingeneral.c \
- tui/tui-winsource.c \
- tui/tui.c
+ tui/tui-winsource.c
+
+SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
SUBDIR_TUI_DEPS =
-SUBDIR_TUI_LDFLAGS=
-SUBDIR_TUI_CFLAGS= \
- -DTUI=1
+SUBDIR_TUI_LDFLAGS =
+SUBDIR_TUI_CFLAGS = -DTUI=1
#
# GCC Compile support sub-directory definitions
#
-SUBDIR_GCC_COMPILE_OBS = \
- compile.o compile-c-symbols.o compile-c-types.o \
- compile-object-load.o compile-object-run.o \
- compile-loc2c.o compile-c-support.o
SUBDIR_GCC_COMPILE_SRCS = \
compile/compile.c \
+ compile/compile-c-support.c \
compile/compile-c-symbols.c \
compile/compile-c-types.c \
+ compile/compile-loc2c.c \
compile/compile-object-load.c \
compile/compile-object-load.h \
compile/compile-object-run.c \
- compile/compile-object-run.h \
- compile/compile-loc2c.c \
- compile/compile-c-support.c
+ compile/compile-object-run.h
-# Guile sub directory definitons for guile support.
+SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
-SUBDIR_GUILE_OBS = \
- guile.o \
- scm-arch.o \
- scm-auto-load.o \
- scm-block.o \
- scm-breakpoint.o \
- scm-cmd.o \
- scm-disasm.o \
- scm-exception.o \
- scm-frame.o \
- scm-gsmob.o \
- scm-iterator.o \
- scm-lazy-string.o \
- scm-objfile.o \
- scm-math.o \
- scm-param.o \
- scm-ports.o \
- scm-pretty-print.o \
- scm-progspace.o \
- scm-safe-call.o \
- scm-string.o \
- scm-symbol.o \
- scm-symtab.o \
- scm-type.o \
- scm-utils.o \
- scm-value.o
+#
+# Guile sub directory definitons for guile support.
+#
SUBDIR_GUILE_SRCS = \
guile/guile.c \
guile/scm-arch.c \
guile/scm-gsmob.c \
guile/scm-iterator.c \
guile/scm-lazy-string.c \
- guile/scm-objfile.c \
guile/scm-math.c \
+ guile/scm-objfile.c \
guile/scm-param.c \
guile/scm-ports.c \
guile/scm-pretty-print.c \
guile/scm-type.c \
guile/scm-utils.c \
guile/scm-value.c
+
+SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
+
SUBDIR_GUILE_DEPS =
-SUBDIR_GUILE_LDFLAGS=
-SUBDIR_GUILE_CFLAGS=
+SUBDIR_GUILE_LDFLAGS =
+SUBDIR_GUILE_CFLAGS =
#
# python sub directory definitons
#
-SUBDIR_PYTHON_OBS = \
- python.o \
- py-arch.o \
- py-auto-load.o \
- py-block.o \
- py-bpevent.o \
- py-breakpoint.o \
- py-cmd.o \
- py-continueevent.o \
- py-xmethods.o \
- py-event.o \
- py-evtregistry.o \
- py-evts.o \
- py-exitedevent.o \
- py-finishbreakpoint.o \
- py-frame.o \
- py-framefilter.o \
- py-function.o \
- py-gdb-readline.o \
- py-inferior.o \
- py-infevents.o \
- py-infthread.o \
- py-lazy-string.o \
- py-linetable.o \
- py-newobjfileevent.o \
- py-objfile.o \
- py-param.o \
- py-prettyprint.o \
- py-progspace.o \
- py-signalevent.o \
- py-stopevent.o \
- py-symbol.o \
- py-symtab.o \
- py-threadevent.o \
- py-type.o \
- py-unwind.o \
- py-utils.o \
- py-value.o \
- py-varobj.o
-
SUBDIR_PYTHON_SRCS = \
- python/python.c \
python/py-arch.c \
python/py-auto-load.c \
python/py-block.c \
python/py-breakpoint.c \
python/py-cmd.c \
python/py-continueevent.c \
- python/py-xmethods.c \
python/py-event.c \
python/py-evtregistry.c \
python/py-evts.c \
python/py-inferior.c \
python/py-infevents.c \
python/py-infthread.c \
+ python/py-instruction.c \
python/py-lazy-string.c \
python/py-linetable.c \
python/py-newobjfileevent.c \
python/py-param.c \
python/py-prettyprint.c \
python/py-progspace.c \
+ python/py-record.c \
+ python/py-record-btrace.c \
+ python/py-record-full.c \
python/py-signalevent.c \
python/py-stopevent.c \
python/py-symbol.c \
python/py-unwind.c \
python/py-utils.c \
python/py-value.c \
- python/py-varobj.c
+ python/py-varobj.c \
+ python/py-xmethods.c \
+ python/python.c
+
+SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
+
SUBDIR_PYTHON_DEPS =
-SUBDIR_PYTHON_LDFLAGS=
-SUBDIR_PYTHON_CFLAGS=
+SUBDIR_PYTHON_LDFLAGS =
+SUBDIR_PYTHON_CFLAGS =
+
+SUBDIR_UNITTESTS_SRCS = \
+ unittests/array-view-selftests.c \
+ unittests/common-utils-selftests.c \
+ unittests/environ-selftests.c \
+ unittests/function-view-selftests.c \
+ unittests/lookup_name_info-selftests.c \
+ unittests/memory-map-selftests.c \
+ unittests/memrange-selftests.c \
+ unittests/offset-type-selftests.c \
+ unittests/optional-selftests.c \
+ unittests/ptid-selftests.c \
+ unittests/rsp-low-selftests.c \
+ unittests/scoped_restore-selftests.c \
+ unittests/xml-utils-selftests.c
+
+SUBDIR_UNITTESTS_OBS = $(patsubst %.c,%.o,$(SUBDIR_UNITTESTS_SRCS))
+
+SUBDIR_TARGET_SRCS = target/waitstatus.c
+SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
+
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
LIBGUI = @LIBGUI@
GUI_CFLAGS_X = @GUI_CFLAGS_X@
-IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
+IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
SUBDIR_GDBTK_OBS = \
- gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
- gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
+ gdbtk.o \
+ gdbtk-bp.o \
+ gdbtk-cmds.o \
+ gdbtk-hooks.o \
+ gdbtk-interp.o \
+ gdbtk-register.o \
+ gdbtk-stack.o \
+ gdbtk-varobj.o \
+ gdbtk-wrapper.o
+
SUBDIR_GDBTK_SRCS = \
- gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
- gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
+ gdbtk/generic/gdbtk.c \
+ gdbtk/generic/gdbtk-bp.c \
+ gdbtk/generic/gdbtk-cmds.c \
+ gdbtk/generic/gdbtk-hooks.c \
gdbtk/generic/gdbtk-interp.c \
- gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
- gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
- gdbtk/generic/gdbtk-main.c
+ gdbtk/generic/gdbtk-main.c \
+ gdbtk/generic/gdbtk-register.c \
+ gdbtk/generic/gdbtk-stack.c \
+ gdbtk/generic/gdbtk-varobj.c \
+ gdbtk/generic/gdbtk-wrapper.c
+
SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
-SUBDIR_GDBTK_LDFLAGS=
-SUBDIR_GDBTK_CFLAGS= -DGDBTK
+SUBDIR_GDBTK_LDFLAGS =
+SUBDIR_GDBTK_CFLAGS = -DGDBTK
-CONFIG_OBS= @CONFIG_OBS@
-CONFIG_SRCS= @CONFIG_SRCS@
-CONFIG_DEPS= @CONFIG_DEPS@
+CONFIG_OBS = @CONFIG_OBS@
+CONFIG_SRCS = @CONFIG_SRCS@
+CONFIG_DEPS = @CONFIG_DEPS@
CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
-ENABLE_CFLAGS= @ENABLE_CFLAGS@
-CONFIG_ALL= @CONFIG_ALL@
-CONFIG_CLEAN= @CONFIG_CLEAN@
+ENABLE_CFLAGS = @ENABLE_CFLAGS@
+CONFIG_ALL = @CONFIG_ALL@
+CONFIG_CLEAN = @CONFIG_CLEAN@
CONFIG_INSTALL = @CONFIG_INSTALL@
CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
+CONFIG_SRC_SUBDIR = arch cli mi compile tui unittests guile python target
+CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
+
# -I. for config files.
# -I$(srcdir) for gdb internal headers.
# -I$(srcdir)/config for more generic config files.
$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
- $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV)
+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-DIST=gdb
+DIST = gdb
-LINT=/usr/5bin/lint
-LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
+LINT = /usr/5bin/lint
+LINTFLAGS = $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
$(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
$(INTL_CFLAGS)
RUNTEST = runtest
-RUNTESTFLAGS=
+RUNTESTFLAGS =
# XML files to build in to GDB.
-XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
+XMLFILES = \
+ $(srcdir)/features/btrace.dtd \
+ $(srcdir)/features/btrace-conf.dtd \
+ $(srcdir)/features/gdb-target.dtd \
$(srcdir)/features/library-list.dtd \
$(srcdir)/features/library-list-aix.dtd \
- $(srcdir)/features/library-list-svr4.dtd $(srcdir)/features/osdata.dtd \
- $(srcdir)/features/threads.dtd $(srcdir)/features/traceframe-info.dtd \
- $(srcdir)/features/btrace.dtd $(srcdir)/features/btrace-conf.dtd
-
-# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
-# interface to the serial port. Hopefully if get ported to OS/2, VMS,
-# etc., then there will be (as part of the C library or perhaps as
-# part of libiberty) a POSIX interface. But at least for now the
-# host-dependent makefile fragment might need to use something else
-# besides ser-unix.o
+ $(srcdir)/features/library-list-svr4.dtd \
+ $(srcdir)/features/osdata.dtd \
+ $(srcdir)/features/threads.dtd \
+ $(srcdir)/features/traceframe-info.dtd \
+ $(srcdir)/features/xinclude.dtd
+
+# Build the ser-*.o files the host supports. This includes ser-unix.o
+# for any system that supports a POSIX interface to the serial port.
+# See configure.ac.
SER_HARDWIRE = @SER_HARDWIRE@
-# The `remote' debugging target is supported for most architectures,
-# but not all (e.g. 960)
-REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
- remote-notif.o ctf.o tracefile.o tracefile-tfile.o
-
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS = @SIM_OBS@
# All target-dependent objects files that require 64-bit CORE_ADDR
# (used with --enable-targets=all --enable-64-bit-bfd).
ALL_64_TARGET_OBS = \
- aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o aarch64-insn.o \
- alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
- alphanbsd-tdep.o alphaobsd-tdep.o alpha-tdep.o \
- amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
- amd64-linux-tdep.o amd64nbsd-tdep.o \
- amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
- ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
- mips64obsd-tdep.o \
- sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
- sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
+ aarch64-fbsd-tdep.o \
+ aarch64-linux-tdep.o \
+ aarch64-newlib-tdep.o \
+ aarch64-tdep.o \
+ alpha-bsd-tdep.o \
+ alpha-linux-tdep.o \
+ alpha-mdebug-tdep.o \
+ alpha-nbsd-tdep.o \
+ alpha-obsd-tdep.o \
+ alpha-tdep.o \
+ amd64-darwin-tdep.o \
+ amd64-dicos-tdep.o \
+ amd64-fbsd-tdep.o \
+ amd64-linux-tdep.o \
+ amd64-nbsd-tdep.o \
+ amd64-obsd-tdep.o \
+ amd64-sol2-tdep.o \
+ amd64-tdep.o \
+ amd64-windows-tdep.o \
+ arch/aarch64.o \
+ arch/aarch64-insn.o \
+ arch/amd64.o \
+ ia64-linux-tdep.o \
+ ia64-tdep.o \
+ ia64-vms-tdep.o \
+ mips64-obsd-tdep.o \
+ sparc64-fbsd-tdep.o \
+ sparc64-linux-tdep.o \
+ sparc64-nbsd-tdep.o \
+ sparc64-obsd-tdep.o \
+ sparc64-sol2-tdep.o \
+ sparc64-tdep.o
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
arc-tdep.o \
- armbsd-tdep.o arm.o arm-linux.o arm-linux-tdep.o \
- arm-get-next-pcs.o arm-symbian-tdep.o \
- armnbsd-tdep.o armobsd-tdep.o \
- arm-tdep.o arm-wince-tdep.o \
+ arch/arm.o \
+ arch/arm-get-next-pcs.o \
+ arch/arm-linux.o \
+ arch/i386.o \
+ arm-bsd-tdep.o \
+ arm-fbsd-tdep.o \
+ arm-linux-tdep.o \
+ arm-nbsd-tdep.o \
+ arm-obsd-tdep.o \
+ arm-symbian-tdep.o \
+ arm-tdep.o \
+ arm-wince-tdep.o \
avr-tdep.o \
- bfin-linux-tdep.o bfin-tdep.o \
- cris-linux-tdep.o cris-tdep.o \
+ bfin-linux-tdep.o \
+ bfin-tdep.o \
+ bsd-uthread.o \
+ cris-linux-tdep.o \
+ cris-tdep.o \
dicos-tdep.o \
fbsd-tdep.o \
- frv-linux-tdep.o frv-tdep.o \
+ frv-linux-tdep.o \
+ frv-tdep.o \
ft32-tdep.o \
+ glibc-tdep.o \
h8300-tdep.o \
- hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
- hppa-linux-tdep.o hppa-tdep.o \
- i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
- i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
- i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
- i386-dicos-tdep.o i386-darwin-tdep.o \
+ hppa-bsd-tdep.o \
+ hppa-linux-tdep.o \
+ hppa-nbsd-tdep.o \
+ hppa-obsd-tdep.o \
+ hppa-tdep.o \
+ i386-bsd-tdep.o \
+ i386-cygwin-tdep.o \
+ i386-darwin-tdep.o \
+ i386-dicos-tdep.o \
+ i386-fbsd-tdep.o \
+ i386-gnu-tdep.o \
+ i386-go32-tdep.o \
+ i386-linux-tdep.o \
+ i386-nbsd-tdep.o \
+ i386-nto-tdep.o \
+ i386-obsd-tdep.o \
+ i386-sol2-tdep.o \
+ i386-tdep.o \
+ i387-tdep.o \
iq2000-tdep.o \
+ linux-record.o \
linux-tdep.o \
lm32-tdep.o \
m32c-tdep.o \
- m32r-linux-tdep.o m32r-tdep.o \
+ m32r-linux-tdep.o \
+ m32r-tdep.o \
m68hc11-tdep.o \
- m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
+ m68k-bsd-tdep.o \
+ m68k-linux-tdep.o \
+ m68k-tdep.o \
m88k-tdep.o \
mep-tdep.o \
- microblaze-tdep.o microblaze-linux-tdep.o \
- mips-linux-tdep.o mips-sde-tdep.o \
- mipsnbsd-tdep.o mips-tdep.o \
- mn10300-linux-tdep.o mn10300-tdep.o \
+ microblaze-linux-tdep.o \
+ microblaze-tdep.o \
+ mips-fbsd-tdep.o \
+ mips-linux-tdep.o \
+ mips-nbsd-tdep.o \
+ mips-sde-tdep.o \
+ mips-tdep.o \
+ mn10300-linux-tdep.o \
+ mn10300-tdep.o \
moxie-tdep.o \
msp430-tdep.o \
mt-tdep.o \
+ nbsd-tdep.o \
nds32-tdep.o \
- nios2-tdep.o nios2-linux-tdep.o \
+ nios2-linux-tdep.o \
+ nios2-tdep.o \
nto-tdep.o \
- ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
- ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
- rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
+ obsd-tdep.o \
+ ppc-fbsd-tdep.o \
+ ppc-linux-tdep.o \
+ ppc-nbsd-tdep.o \
+ ppc-obsd-tdep.o \
+ ppc-ravenscar-thread.o \
+ ppc-sysv-tdep.o \
+ ppc64-tdep.o \
+ ravenscar-thread.o \
+ rl78-tdep.o \
+ rs6000-aix-tdep.o \
rs6000-lynx178-tdep.o \
+ rs6000-tdep.o \
rx-tdep.o \
s390-linux-tdep.o \
score-tdep.o \
- sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
- sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
- sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
- spu-tdep.o spu-multiarch.o solib-spu.o \
- tic6x-tdep.o tic6x-linux-tdep.o \
- tilegx-tdep.o tilegx-linux-tdep.o \
- v850-tdep.o \
- vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
- xstormy16-tdep.o \
- xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
- glibc-tdep.o \
- bsd-uthread.o \
- nbsd-tdep.o obsd-tdep.o \
+ sh-linux-tdep.o \
+ sh-nbsd-tdep.o \
+ sh-tdep.o \
+ sh64-tdep.o \
sol2-tdep.o \
- solib-frv.o solib-svr4.o \
- solib-darwin.o solib-dsbt.o \
- xcoffread.o \
+ solib-aix.o \
+ solib-darwin.o \
+ solib-dsbt.o \
+ solib-frv.o \
+ solib-spu.o \
+ solib-svr4.o \
+ sparc-linux-tdep.o \
+ sparc-nbsd-tdep.o \
+ sparc-obsd-tdep.o \
+ sparc-ravenscar-thread.o \
+ sparc-sol2-tdep.o \
+ sparc-tdep.o \
+ spu-multiarch.o \
+ spu-tdep.o \
symfile-mem.o \
+ tic6x-linux-tdep.o \
+ tic6x-tdep.o \
+ tilegx-linux-tdep.o \
+ tilegx-tdep.o \
+ v850-tdep.o \
+ vax-nbsd-tdep.o \
+ vax-tdep.o \
windows-tdep.o \
- linux-record.o \
- ravenscar-thread.o
-
-# Host-dependent makefile fragment comes in here.
-@host_makefile_frag@
-# End of host-dependent makefile fragment
+ xcoffread.o \
+ xstormy16-tdep.o \
+ xtensa-config.o \
+ xtensa-linux-tdep.o \
+ xtensa-tdep.o
+
+# The following native-target dependent variables are defined on
+# configure.nat.
+NAT_FILE = @NAT_FILE@
+NATDEPFILES = @NATDEPFILES@
+NAT_CDEPS = @NAT_CDEPS@
+LOADLIBES = @LOADLIBES@
+MH_CFLAGS = @MH_CFLAGS@
+XM_CLIBS = @XM_CLIBS@
+NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
+HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
+
+# Native-target dependent makefile fragment comes in here.
+@nat_makefile_frag@
+
+# End of native-target dependent variables.
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"CXX=$(CXX)" \
+ "CXX_DIALECT=$(CXX_DIALECT)" \
"CXXFLAGS=$(CXXFLAGS)" \
"DLLTOOL=$(DLLTOOL)" \
"LDFLAGS=$(LDFLAGS)" \
"TESTS=$(TESTS)"
# All source files that go into linking GDB.
-# Links made at configuration time should not be specified here, since
-# SFILES is used in building the distribution archive.
-SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
+# Files that should wind up in SFILES and whose corresponding .o
+# should be in COMMON_OBS.
+COMMON_SFILES = \
+ ada-lang.c \
+ ada-tasks.c \
+ ada-typeprint.c \
+ ada-valprint.c \
ada-varobj.c \
- addrmap.c auto-load.c \
- auxv.c ax-general.c ax-gdb.c \
+ addrmap.c \
agent.c \
+ annotate.c \
+ arch-utils.c \
+ auto-load.c \
+ auxv.c \
+ ax-gdb.c \
+ ax-general.c \
bcache.c \
bfd-target.c \
- block.c blockframe.c \
- breakpoint.c break-catch-sig.c break-catch-throw.c \
+ block.c \
+ blockframe.c \
+ break-catch-sig.c \
break-catch-syscall.c \
- build-id.c buildsym.c \
- c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
- charset.c common/cleanups.c cli-out.c coffread.c coff-pe-read.c \
- complaints.c completer.c continuations.c corefile.c corelow.c \
- cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
- d-exp.y d-lang.c d-namespace.c d-valprint.c \
- cp-name-parser.y \
- dbxread.c demangle.c dictionary.c disasm.c doublest.c \
- dtrace-probe.c dummy-frame.c \
- dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
+ break-catch-throw.c \
+ breakpoint.c \
+ btrace.c \
+ build-id.c \
+ buildsym.c \
+ c-lang.c \
+ c-typeprint.c \
+ c-valprint.c \
+ c-varobj.c \
+ charset.c \
+ cli-out.c \
+ coff-pe-read.c \
+ coffread.c \
+ complaints.c \
+ completer.c \
+ continuations.c \
+ copying.c \
+ corefile.c \
+ corelow.c \
+ cp-abi.c \
+ cp-namespace.c \
+ cp-support.c \
+ cp-valprint.c \
+ ctf.c \
+ d-lang.c \
+ d-namespace.c \
+ d-valprint.c \
+ dbxread.c \
+ dcache.c \
+ debug.c \
+ demangle.c \
+ dictionary.c \
+ disasm.c \
+ disasm-selftests.c \
+ dummy-frame.c \
+ dwarf2-frame.c \
dwarf2-frame-tailcall.c \
- elfread.c environ.c eval.c event-loop.c event-top.c \
- exceptions.c expprint.c extension.c \
- f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
- findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
- gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
- gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
- go-exp.y go-lang.c go-typeprint.c go-valprint.c \
+ dwarf2expr.c \
+ dwarf2loc.c \
+ dwarf2read.c \
+ eval.c \
+ event-loop.c \
+ event-top.c \
+ exceptions.c \
+ expprint.c \
+ extension.c \
+ f-lang.c \
+ f-typeprint.c \
+ f-valprint.c \
+ filename-seen-cache.c \
+ filesystem.c \
+ findcmd.c \
+ findvar.c \
+ frame.c \
+ frame-base.c \
+ frame-unwind.c \
+ gcore.c \
+ gdb_bfd.c \
+ gdb-dlfcn.c \
+ gdb_obstack.c \
+ gdb_regex.c \
+ gdb_usleep.c \
+ gdbarch.c \
+ gdbarch-selftests.c \
+ gdbtypes.c \
+ gnu-v2-abi.c \
+ gnu-v3-abi.c \
+ go-lang.c \
+ go-typeprint.c \
+ go-valprint.c \
+ inf-child.c \
inf-loop.c \
infcall.c \
- infcmd.c inflow.c infrun.c \
+ infcmd.c \
+ inferior.c \
+ infrun.c \
inline-frame.c \
interps.c \
- jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
- language.c linespec.c location.c minidebug.c \
- m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
- macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
- mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
- memrange.c mi/mi-common.c \
+ jit.c \
+ language.c \
+ linespec.c \
+ location.c \
+ m2-lang.c \
+ m2-typeprint.c \
+ m2-valprint.c \
+ macrocmd.c \
+ macroexp.c \
+ macroscope.c \
+ macrotab.c \
+ main.c \
+ maint.c \
+ mdebugread.c \
+ mem-break.c \
+ memattr.c \
+ memory-map.c \
+ memrange.c \
+ minidebug.c \
+ minsyms.c \
+ mipsread.c \
namespace.c \
objc-lang.c \
- objfiles.c osabi.c observer.c osdata.c \
+ objfiles.c \
+ observer.c \
opencl-lang.c \
- p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
- proc-service.list progspace.c \
- prologue-value.c psymtab.c \
- regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
- rust-exp.y rust-lang.c \
- selftest.c sentinel-frame.c \
- serial.c ser-base.c ser-unix.c ser-event.c skip.c \
- solib.c solib-target.c source.c \
- stabsread.c stack.c probe.c stap-probe.c std-regs.c \
- symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
- target.c target-dcache.c target-descriptions.c target-memory.c \
- tid-parse.c thread.c top.c tracepoint.c \
+ osabi.c \
+ osdata.c \
+ p-lang.c \
+ p-typeprint.c \
+ p-valprint.c \
+ parse.c \
+ printcmd.c \
+ probe.c \
+ producer.c \
+ progspace.c \
+ progspace-and-thread.c \
+ prologue-value.c \
+ psymtab.c \
+ record.c \
+ record-btrace.c \
+ record-full.c \
+ regcache.c \
+ reggroups.c \
+ registry.c \
+ remote.c \
+ remote-fileio.c \
+ remote-notif.c \
+ reverse.c \
+ rust-lang.c \
+ sentinel-frame.c \
+ ser-event.c \
+ serial.c \
+ skip.c \
+ solib.c \
+ solib-target.c \
+ source.c \
+ stabsread.c \
+ stack.c \
+ std-regs.c \
+ symfile.c \
+ symfile-debug.c \
+ symmisc.c \
+ symtab.c \
+ target.c \
+ target-dcache.c \
+ target-descriptions.c \
+ target-memory.c \
+ thread.c \
+ thread-fsm.c \
+ tid-parse.c \
+ top.c \
+ tracefile.c \
+ tracefile-tfile.c \
+ tracepoint.c \
trad-frame.c \
tramp-frame.c \
+ target-float.c \
typeprint.c \
- ui-out.c utils.c ui-file.h ui-file.c \
+ ui-file.c \
+ ui-out.c \
user-regs.c \
- valarith.c valops.c valprint.c value.c varobj.c common/vec.c \
- xml-tdesc.c xml-support.c \
- inferior.c gdb_usleep.c \
- record.c record-full.c gcore.c \
- jit.c \
+ utils.c \
+ valarith.c \
+ valops.c \
+ valprint.c \
+ value.c \
+ varobj.c \
+ xml-support.c \
xml-syscall.c \
- annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \
- sol-thread.c stub-termcap.c \
- common/gdb_vecs.c common/common-utils.c common/xml-utils.c \
- common/ptid.c common/buffer.c gdb-dlfcn.c common/agent.c \
- common/format.c common/filestuff.c btrace.c record-btrace.c ctf.c \
- target/waitstatus.c common/print-utils.c common/rsp-low.c \
- common/errors.c common/common-debug.c common/common-exceptions.c \
- common/btrace-common.c common/fileio.c common/common-regcache.c \
- common/signals-state-save-restore.c common/new-op.c \
+ xml-tdesc.c
+
+# Links made at configuration time should not be specified here, since
+# SFILES is used in building the distribution archive.
+SFILES = \
+ ada-exp.y \
+ arch/i386.c \
+ c-exp.y \
+ cp-name-parser.y \
+ d-exp.y \
+ dtrace-probe.c \
+ elfread.c \
+ f-exp.y \
+ gdb.c \
+ go-exp.y \
+ inflow.c \
+ m2-exp.y \
+ p-exp.y \
+ proc-service.list \
+ rust-exp.y \
+ ser-base.c \
+ ser-unix.c \
+ sol-thread.c \
+ stap-probe.c \
+ stub-termcap.c \
+ symfile-mem.c \
+ ui-file.h \
+ common/agent.c \
+ common/btrace-common.c \
+ common/buffer.c \
+ common/cleanups.c \
+ common/common-debug.c \
+ common/common-exceptions.c \
+ common/common-regcache.c \
+ common/common-utils.c \
+ common/errors.c \
+ common/environ.c \
+ common/fileio.c \
+ common/filestuff.c \
+ common/format.c \
+ common/job-control.c \
+ common/gdb_tilde_expand.c \
+ common/gdb_vecs.c \
+ common/new-op.c \
+ common/pathstuff.c \
+ common/print-utils.c \
+ common/ptid.c \
+ common/rsp-low.c \
+ common/run-time-clock.c \
+ common/signals.c \
+ common/signals-state-save-restore.c \
+ common/vec.c \
+ common/xml-utils.c \
+ mi/mi-common.c \
+ $(SUBDIR_TARGET_SRCS) \
+ $(COMMON_SFILES) \
$(SUBDIR_GCC_COMPILE_SRCS)
LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
# right, it is probably easiest just to list .h files here directly.
HFILES_NO_SRCDIR = \
-common/gdb_signals.h nat/gdb_thread_db.h common/gdb_vecs.h \
-common/x86-xstate.h nat/linux-ptrace.h nat/mips-linux-watch.h \
-proc-utils.h aarch64-tdep.h arc-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
-ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
-exec.h m32r-tdep.h osabi.h gdbcore.h x86bsd-nat.h \
-i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
-ia64-tdep.h ada-lang.h varobj.h varobj-iter.h frv-tdep.h \
-nto-tdep.h serial.h \
-c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
-cli/cli-decode.h cli/cli-cmds.h cli/cli-utils.h \
-cli/cli-script.h macrotab.h symtab.h common/version.h \
-compile/compile.h gnulib/import/string.in.h gnulib/import/str-two-way.h \
-gnulib/import/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
-gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
-amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
-gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
-mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
-ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
-f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
-objfiles.h common/vec.h disasm.h mips-tdep.h ser-base.h \
-gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
-inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h \
-solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
-m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
-target.h target-dcache.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
-tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
-tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
-tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
-tui/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
-expression.h score-tdep.h gdb_select.h ser-tcp.h \
-extension.h extension-priv.h nat/aarch64-linux-hw-point.h \
-build-id.h buildsym.h valprint.h nat/aarch64-linux.h \
-typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
-mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
-complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
-common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
-interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
-amd64-linux-tdep.h linespec.h location.h i387-tdep.h mn10300-tdep.h \
-sparc64-tdep.h ppcobsd-tdep.h \
-coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
-m68k-tdep.h spu-tdep.h jv-lang.h environ.h amd64-tdep.h \
-doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
-rs6000-tdep.h rs6000-aix-tdep.h \
-common/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
-language.h nbsd-tdep.h solib-svr4.h \
-macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
-inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
-regformats/regdef.h config/i386/nm-i386gnu.h \
-config/i386/nm-fbsd.h \
-config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
-top.h bsd-kvm.h gdb-stabs.h reggroups.h \
-annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
-remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
-sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
-gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
-psymtab.h psympriv.h progspace.h bfin-tdep.h \
-amd64-darwin-tdep.h charset-list.h \
-config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
-dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
-i386-darwin-tdep.h x86-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
-ft32-tdep.h nds32-tdep.h \
-osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
-python/python-internal.h python/python.h ravenscar-thread.h record.h \
-record-full.h solib-aix.h \
-solib-darwin.h solib-spu.h windows-nat.h xcoffread.h \
-gnulib/import/extra/snippet/arg-nonnull.h gnulib/import/extra/snippet/c++defs.h \
-gnulib/import/extra/snippet/warn-on-use.h \
-gnulib/import/stddef.in.h gnulib/import/inttypes.in.h inline-frame.h skip.h \
-common/common-utils.h common/xml-utils.h common/buffer.h common/ptid.h \
-common/format.h common/host-defs.h utils.h common/queue.h \
-nat/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
-gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat/linux-btrace.h \
-nat/ppc-linux.h ctf.h nat/x86-cpuid.h nat/x86-gcc-cpuid.h target/resume.h \
-target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h \
-common/print-utils.h common/rsp-low.h nat/x86-dregs.h x86-linux-nat.h \
-i386-linux-nat.h common/common-defs.h common/errors.h common/common-types.h \
-common/common-debug.h common/cleanups.h common/gdb_setjmp.h \
-common/common-exceptions.h target/target.h common/symbol.h \
-common/common-regcache.h fbsd-tdep.h nat/linux-personality.h \
-common/fileio.h nat/x86-linux.h nat/x86-linux-dregs.h nat/amd64-linux-siginfo.h\
-nat/linux-namespaces.h arch/arm.h common/gdb_sys_time.h arch/aarch64-insn.h \
-tid-parse.h ser-event.h \
-common/signals-state-save-restore.h
+ aarch64-tdep.h \
+ ada-lang.h \
+ addrmap.h \
+ alpha-bsd-tdep.h \
+ alpha-tdep.h \
+ amd64-darwin-tdep.h \
+ amd64-linux-tdep.h \
+ amd64-nat.h \
+ amd64-tdep.h \
+ annotate.h \
+ arc-tdep.h \
+ arch-utils.h \
+ arm-linux-tdep.h \
+ arm-tdep.h \
+ auto-load.h \
+ auxv.h \
+ ax.h \
+ ax-gdb.h \
+ bcache.h \
+ bfd-target.h \
+ bfin-tdep.h \
+ block.h \
+ breakpoint.h \
+ bsd-kvm.h \
+ bsd-uthread.h \
+ build-id.h \
+ buildsym.h \
+ c-lang.h \
+ charset.h \
+ charset-list.h \
+ cli-out.h \
+ coff-pe-read.h \
+ command.h \
+ complaints.h \
+ completer.h \
+ cp-abi.h \
+ cp-support.h \
+ ctf.h \
+ d-lang.h \
+ darwin-nat.h \
+ dcache.h \
+ defs.h \
+ dicos-tdep.h \
+ dictionary.h \
+ disasm.h \
+ dummy-frame.h \
+ dwarf2-frame.h \
+ dwarf2-frame-tailcall.h \
+ dwarf2expr.h \
+ dwarf2loc.h \
+ event-loop.h \
+ event-top.h \
+ exceptions.h \
+ exec.h \
+ expression.h \
+ extension.h \
+ extension-priv.h \
+ f-lang.h \
+ fbsd-nat.h \
+ fbsd-tdep.h \
+ filesystem.h \
+ frame.h \
+ frame-base.h \
+ frame-unwind.h \
+ frv-tdep.h \
+ ft32-tdep.h \
+ gcore.h \
+ gdb_bfd.h \
+ gdb_curses.h \
+ gdb-dlfcn.h \
+ gdb_expat.h \
+ gdb_obstack.h \
+ gdb_proc_service.h \
+ gdb_regex.h \
+ gdb_select.h \
+ gdb-stabs.h \
+ gdb_usleep.h \
+ gdb_vfork.h \
+ gdb_wchar.h \
+ gdbarch.h \
+ gdbcmd.h \
+ gdbcore.h \
+ gdbthread.h \
+ gdbtypes.h \
+ glibc-tdep.h \
+ gnu-nat.h \
+ go-lang.h \
+ gregset.h \
+ hppa-bsd-tdep.h \
+ hppa-linux-offsets.h \
+ hppa-tdep.h \
+ i386-bsd-nat.h \
+ i386-darwin-tdep.h \
+ i386-linux-nat.h \
+ i386-linux-tdep.h \
+ i386-tdep.h \
+ i387-tdep.h \
+ ia64-libunwind-tdep.h \
+ ia64-tdep.h \
+ inf-child.h \
+ inf-loop.h \
+ inf-ptrace.h \
+ infcall.h \
+ inferior.h \
+ inflow.h \
+ inline-frame.h \
+ interps.h \
+ jit.h \
+ language.h \
+ linespec.h \
+ linux-fork.h \
+ linux-nat.h \
+ linux-record.h \
+ linux-tdep.h \
+ location.h \
+ m2-lang.h \
+ m32r-tdep.h \
+ m68k-tdep.h \
+ m88k-tdep.h \
+ macroexp.h \
+ macroscope.h \
+ macrotab.h \
+ main.h \
+ mdebugread.h \
+ memattr.h \
+ memory-map.h \
+ memrange.h \
+ microblaze-tdep.h \
+ mips-linux-tdep.h \
+ mips-nbsd-tdep.h \
+ mips-tdep.h \
+ mn10300-tdep.h \
+ moxie-tdep.h \
+ nbsd-nat.h \
+ nbsd-tdep.h \
+ nds32-tdep.h \
+ nios2-tdep.h \
+ nto-tdep.h \
+ objc-lang.h \
+ objfiles.h \
+ obsd-nat.h \
+ obsd-tdep.h \
+ osabi.h \
+ osdata.h \
+ p-lang.h \
+ parser-defs.h \
+ ppc-fbsd-tdep.h \
+ ppc-linux-tdep.h \
+ ppc-nbsd-tdep.h \
+ ppc-obsd-tdep.h \
+ ppc-ravenscar-thread.h \
+ ppc-tdep.h \
+ ppc64-tdep.h \
+ probe.h \
+ proc-utils.h \
+ procfs.h \
+ progspace.h \
+ progspace-and-thread.h \
+ prologue-value.h \
+ psympriv.h \
+ psymtab.h \
+ ravenscar-thread.h \
+ record.h \
+ record-full.h \
+ regcache.h \
+ reggroups.h \
+ regset.h \
+ remote.h \
+ remote-fileio.h \
+ remote-notif.h \
+ rs6000-aix-tdep.h \
+ rs6000-tdep.h \
+ s390-linux-tdep.h \
+ score-tdep.h \
+ selftest-arch.h \
+ sentinel-frame.h \
+ ser-base.h \
+ ser-event.h \
+ ser-tcp.h \
+ ser-unix.h \
+ serial.h \
+ sh-tdep.h \
+ sh64-tdep.h \
+ sim-regno.h \
+ skip.h \
+ sol2-tdep.h \
+ solib.h \
+ solib-aix.h \
+ solib-darwin.h \
+ solib-spu.h \
+ solib-svr4.h \
+ solib-target.h \
+ solist.h \
+ source.h \
+ sparc-nat.h \
+ sparc-ravenscar-thread.h \
+ sparc-tdep.h \
+ sparc64-tdep.h \
+ spu-tdep.h \
+ stabsread.h \
+ stack.h \
+ stap-probe.h \
+ symfile.h \
+ symtab.h \
+ target.h \
+ target-dcache.h \
+ target-descriptions.h \
+ terminal.h \
+ tid-parse.h \
+ top.h \
+ tracefile.h \
+ tracepoint.h \
+ trad-frame.h \
+ target-float.h \
+ tramp-frame.h \
+ typeprint.h \
+ ui-file.h \
+ ui-out.h \
+ user-regs.h \
+ utils.h \
+ valprint.h \
+ value.h \
+ varobj.h \
+ varobj-iter.h \
+ vax-tdep.h \
+ windows-nat.h \
+ windows-tdep.h \
+ x86-bsd-nat.h \
+ x86-linux-nat.h \
+ x86-nat.h \
+ xcoffread.h \
+ xml-support.h \
+ xml-syscall.h \
+ xml-tdesc.h \
+ xtensa-tdep.h \
+ arch/aarch64.h \
+ arch/aarch64-insn.h \
+ arch/arm.h \
+ arch/i386.h \
+ cli/cli-cmds.h \
+ cli/cli-decode.h \
+ cli/cli-script.h \
+ cli/cli-setshow.h \
+ cli/cli-utils.h \
+ common/buffer.h \
+ common/cleanups.h \
+ common/common-debug.h \
+ common/common-defs.h \
+ common/common-exceptions.h \
+ common/common-gdbthread.h \
+ common/common-regcache.h \
+ common/common-types.h \
+ common/common-utils.h \
+ common/job-control.h \
+ common/errors.h \
+ common/environ.h \
+ common/fileio.h \
+ common/format.h \
+ common/gdb_assert.h \
+ common/gdb_tilde_expand.h \
+ common/gdb_locale.h \
+ common/gdb_setjmp.h \
+ common/gdb_signals.h \
+ common/gdb_sys_time.h \
+ common/gdb_vecs.h \
+ common/gdb_wait.h \
+ common/common-inferior.h \
+ common/host-defs.h \
+ common/pathstuff.h \
+ common/print-utils.h \
+ common/ptid.h \
+ common/queue.h \
+ common/rsp-low.h \
+ common/run-time-clock.h \
+ common/signals-state-save-restore.h \
+ common/symbol.h \
+ common/vec.h \
+ common/version.h \
+ common/x86-xstate.h \
+ common/xml-utils.h \
+ compile/compile.h \
+ config/nm-linux.h \
+ config/nm-nto.h \
+ config/djgpp/langinfo.h \
+ config/djgpp/nl_types.h \
+ config/i386/nm-fbsd.h \
+ config/i386/nm-i386gnu.h \
+ config/sparc/nm-sol2.h \
+ gnulib/import/inttypes.in.h \
+ gnulib/import/stddef.in.h \
+ gnulib/import/stdint.in.h \
+ gnulib/import/str-two-way.h \
+ gnulib/import/string.in.h \
+ gnulib/import/extra/snippet/arg-nonnull.h \
+ gnulib/import/extra/snippet/c++defs.h \
+ gnulib/import/extra/snippet/warn-on-use.h \
+ mi/mi-cmds.h \
+ mi/mi-common.h \
+ mi/mi-console.h \
+ mi/mi-getopt.h \
+ mi/mi-main.h \
+ mi/mi-out.h \
+ mi/mi-parse.h \
+ nat/aarch64-linux.h \
+ nat/aarch64-linux-hw-point.h \
+ nat/amd64-linux-siginfo.h \
+ nat/gdb_ptrace.h \
+ nat/gdb_thread_db.h \
+ nat/fork-inferior.h \
+ nat/linux-btrace.h \
+ nat/linux-namespaces.h \
+ nat/linux-nat.h \
+ nat/linux-osdata.h \
+ nat/linux-personality.h \
+ nat/linux-ptrace.h \
+ nat/linux-waitpid.h \
+ nat/mips-linux-watch.h \
+ nat/ppc-linux.h \
+ nat/x86-cpuid.h \
+ nat/x86-dregs.h \
+ nat/x86-gcc-cpuid.h \
+ nat/x86-linux.h \
+ nat/x86-linux-dregs.h \
+ python/py-event.h \
+ python/py-events.h \
+ python/py-stopevent.h \
+ python/python.h \
+ python/python-internal.h \
+ regformats/regdef.h \
+ target/resume.h \
+ target/target.h \
+ target/wait.h \
+ target/waitstatus.h \
+ tui/tui.h \
+ tui/tui-command.h \
+ tui/tui-data.h \
+ tui/tui-disasm.h \
+ tui/tui-file.h \
+ tui/tui-hooks.h \
+ tui/tui-io.h \
+ tui/tui-layout.h \
+ tui/tui-regs.h \
+ tui/tui-source.h \
+ tui/tui-stack.h \
+ tui/tui-win.h \
+ tui/tui-windata.h \
+ tui/tui-wingeneral.h \
+ tui/tui-winsource.h
# Header files that already have srcdir in them, or which are in objdir.
-HFILES_WITH_SRCDIR = ../bfd/bfd.h jit-reader.h
-
+HFILES_WITH_SRCDIR = \
+ ../bfd/bfd.h \
+ jit-reader.h
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
- version.o \
- annotate.o \
- addrmap.o \
- auto-load.o auxv.o \
- agent.o \
- bfd-target.o \
- blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
- break-catch-syscall.o \
- findvar.o regcache.o cleanups.o \
- charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
- source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
- block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
- linespec.o dictionary.o namespace.o \
- location.o infcall.o \
- infcmd.o infrun.o \
- expprint.o environ.o stack.o tid-parse.o thread.o thread-fsm.o \
- exceptions.o \
- extension.o \
- filesystem.o \
+ btrace-common.o \
+ buffer.o \
+ cleanups.o \
+ common-agent.o \
+ common-debug.o \
+ common-exceptions.o \
+ job-control.o \
+ common-regcache.o \
+ common-utils.o \
+ environ.o \
+ errors.o \
+ exec.o \
+ fileio.o \
filestuff.o \
- inf-child.o \
- interps.o \
- minidebug.o \
- main.o \
- macrotab.o macrocmd.o macroexp.o macroscope.o \
- mi-common.o \
- event-loop.o event-top.o inf-loop.o completer.o \
- gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
- osabi.o copying.o \
- memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
- build-id.o buildsym.o \
- findcmd.o \
- std-regs.o \
- signals-state-save-restore.o \
+ format.o \
+ gdb_tilde_expand.o \
+ gdb_vecs.o \
+ mi/mi-common.o \
+ new-op.o \
+ pathstuff.o \
+ print-utils.o \
+ ptid.o \
+ rsp-low.o \
+ run-time-clock.o \
signals.o \
- exec.o reverse.o \
- bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
- dbxread.o coffread.o coff-pe-read.o \
- dwarf2read.o mipsread.o stabsread.o corefile.o \
- dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
- ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
- ada-tasks.o ada-varobj.o c-varobj.o \
- ui-out.o cli-out.o \
- varobj.o vec.o \
- go-lang.o go-valprint.o go-typeprint.o \
- jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
- m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
- selftest.o sentinel-frame.o \
- complaints.o typeprint.o \
- ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
- ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
- m2-valprint.o \
- ser-event.o serial.o mdebugread.o top.o utils.o \
- ui-file.o \
- user-regs.o \
- frame.o frame-unwind.o doublest.o \
- frame-base.o \
- inline-frame.o \
- gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
- cp-namespace.o d-namespace.o \
- reggroups.o \
- rust-lang.o \
- trad-frame.o \
- tramp-frame.o \
- solib.o solib-target.o \
- prologue-value.o memory-map.o memrange.o \
- xml-support.o xml-syscall.o xml-utils.o \
- target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
- inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
- gdb_vecs.o jit.o progspace.o skip.o probe.o \
- common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
- format.o registry.o btrace.o record-btrace.o waitstatus.o \
- print-utils.o rsp-low.o errors.o common-debug.o debug.o \
- common-exceptions.o btrace-common.o fileio.o \
- common-regcache.o new-op.o \
+ signals-state-save-restore.o \
+ vec.o \
+ version.o \
+ xml-builtin.o \
+ xml-utils.o \
+ $(patsubst %.c,%.o,$(COMMON_SFILES)) \
+ $(SUBDIR_TARGET_OBS) \
$(SUBDIR_GCC_COMPILE_OBS)
TSOBS = inflow.o
# The format here is for the `case' shell command.
REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
-# For now, shortcut the "configure GDB for fewer languages" stuff.
-YYFILES = c-exp.c \
- cp-name-parser.c \
- ada-lex.c \
+# Parser intermediate files.
+YYFILES = \
ada-exp.c \
- jv-exp.c \
- d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
-YYOBJ = c-exp.o \
- cp-name-parser.o \
- ada-exp.o \
- jv-exp.o \
- d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o rust-exp.o
+ ada-lex.c \
+ c-exp.c \
+ cp-name-parser.c \
+ d-exp.c \
+ f-exp.c \
+ go-exp.c \
+ m2-exp.c \
+ p-exp.c \
+ rust-exp.c
+
+# ada-lex.c is included by another file, so it shouldn't wind up as a
+# .o itself.
+YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
# Things which need to be built when making a distribution.
# All generated files which can be included by another file.
-generated_files = config.h observer.h observer.inc ada-lex.c jit-reader.h \
- $(GNULIB_H) $(NAT_GENERATED_FILES) gcore
+generated_files = \
+ ada-lex.c \
+ config.h \
+ gcore \
+ jit-reader.h \
+ observer.h \
+ observer.inc \
+ $(GNULIB_H) \
+ $(NAT_GENERATED_FILES)
-.c.o:
- $(COMPILE) $<
- $(POSTCOMPILE)
+# Flags needed to compile Python code
+PYTHON_CFLAGS = @PYTHON_CFLAGS@
all: gdb$(EXEEXT) $(CONFIG_ALL)
@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
+# Rule for compiling .c files in the top-level gdb directory.
+# The order-only dependencies ensure that we create the build subdirectories.
+%.o: %.c | $(CONFIG_DEP_SUBDIR)
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+$(CONFIG_DEP_SUBDIR):
+ $(SHELL) $(srcdir)/../mkinstalldirs $@
+
+# Python files need special flags.
+python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
+
+# Rules for compiling .c files in the various source subdirectories.
+%.o: ${srcdir}/common/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/gdbtk/generic/%.c
+ $(COMPILE) $(all_gdbtk_cflags) $<
+ $(POSTCOMPILE)
+
+%.o: ${srcdir}/nat/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+# Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
+# object file generate by gdb/agent.c.
+common-agent.o: $(srcdir)/common/agent.c
+ $(COMPILE) $(srcdir)/common/agent.c
+ $(POSTCOMPILE)
+
installcheck:
# The check target can not use subdir_do, because subdir_do does not
check-headers:
@echo Checking headers.
for i in $(CHECK_HEADERS) ; do \
- $(CC) -x c -c -fsyntax-only $(INTERNAL_CFLAGS) \
- -include defs.h $(srcdir)/$$i ; \
+ $(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
+ $(INTERNAL_CFLAGS) -include defs.h $(srcdir)/$$i ; \
done
.PHONY: check-headers
# against that.
#
# init.o is very important. It pulls in the rest of GDB.
-LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
+LIBGDB_OBS = $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
libgdb.a: $(LIBGDB_OBS)
-rm -f libgdb.a
$(AR) q libgdb.a $(LIBGDB_OBS)
rm -f test-cp-name-parser$(EXEEXT)
rm -f xml-builtin.c stamp-xml
rm -f $(DEPDIR)/*
+ for i in $(CONFIG_SRC_SUBDIR); do \
+ rm -f $$i/*.o; \
+ rm -f $$i/$(DEPDIR)/*; \
+ done
# This used to depend on c-exp.c m2-exp.c TAGS
# I believe this is wrong; the makefile standards for distclean just
rm -f config.log config.cache
rm -f Makefile
rm -rf $(DEPDIR)
+ for i in $(CONFIG_SRC_SUBDIR); do \
+ if test -d $$i/$(DEPDIR); then rmdir $$i/$(DEPDIR); fi \
+ done
maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
realclean: maintainer-clean
rm -f c-exp.c \
cp-name-parser.c \
ada-lex.c ada-exp.c \
- jv-exp.tab \
d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
rm -f TAGS $(INFOFILES)
rm -f $(YYFILES)
else true ; fi ; \
done
-Makefile: Makefile.in config.status @frags@
+Makefile: Makefile.in config.status
# Regenerate the Makefile and the tm.h / nm.h links.
CONFIG_FILES="Makefile" \
CONFIG_COMMANDS= \
CONFIG_HEADERS= \
$(SHELL) config.status
-$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status @frags@
+$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
@cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
CONFIG_COMMANDS="depfiles" \
CONFIG_HEADERS= \
CONFIG_LINKS= \
$(SHELL) config.status
-data-directory/Makefile: data-directory/Makefile.in config.status @frags@
+data-directory/Makefile: data-directory/Makefile.in config.status
CONFIG_FILES="data-directory/Makefile" \
CONFIG_COMMANDS="depfiles" \
CONFIG_HEADERS= \
# GNU Make 3.63 has a different problem: it keeps tacking command line
# overrides onto the definition of $(MAKE). This variable setting
# will remove them.
-MAKEOVERRIDES=
+MAKEOVERRIDES =
ALLDEPFILES = \
- aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
+ aarch64-fbsd-nat.c \
+ aarch64-fbsd-tdep.c \
aarch64-linux-nat.c \
+ aarch64-linux-tdep.c \
+ aarch64-newlib-tdep.c \
+ aarch64-tdep.c \
aix-thread.c \
- alphabsd-nat.c alpha-linux-nat.c \
- alpha-tdep.c alpha-mdebug-tdep.c \
+ alpha-bsd-nat.c \
+ alpha-bsd-tdep.c \
+ alpha-linux-nat.c \
alpha-linux-tdep.c \
- alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
- arc-tdep.c \
- amd64-nat.c amd64-tdep.c \
- amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
- amd64nbsd-nat.c amd64nbsd-tdep.c \
- amd64obsd-nat.c amd64obsd-tdep.c \
+ alpha-mdebug-tdep.c \
+ alpha-nbsd-tdep.c \
+ alpha-obsd-tdep.c \
+ alpha-tdep.c \
+ amd64-bsd-nat.c \
amd64-darwin-tdep.c \
amd64-dicos-tdep.c \
- amd64-linux-nat.c amd64-linux-tdep.c \
+ amd64-fbsd-nat.c \
+ amd64-fbsd-tdep.c \
+ amd64-linux-nat.c \
+ amd64-linux-tdep.c \
+ amd64-nat.c \
+ amd64-nbsd-nat.c \
+ amd64-nbsd-tdep.c \
+ amd64-obsd-nat.c \
+ amd64-obsd-tdep.c \
amd64-sol2-tdep.c \
- arm.c arm-get-next-pcs.c \
- arm-linux.c arm-linux-nat.c arm-linux-tdep.c \
- arm-symbian-tdep.c arm-tdep.c \
- armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
+ amd64-tdep.c \
+ arc-tdep.c \
+ arm.c \
+ arm-bsd-tdep.c \
+ arm-fbsd-nat.c \
+ arm-fbsd-tdep.c \
+ arm-get-next-pcs.c \
+ arm-linux.c \
+ arm-linux-nat.c \
+ arm-linux-tdep.c \
+ arm-nbsd-nat.c \
+ arm-nbsd-tdep.c \
+ arm-obsd-tdep.c \
+ arm-symbian-tdep.c \
+ arm-tdep.c \
avr-tdep.c \
- bfin-linux-tdep.c bfin-tdep.c \
- bsd-uthread.c bsd-kvm.c \
- core-regset.c \
- dcache.c dicos-tdep.c darwin-nat.c \
+ bfin-linux-tdep.c \
+ bfin-tdep.c \
+ bsd-kvm.c \
+ bsd-uthread.c \
+ darwin-nat.c \
+ dicos-tdep.c \
exec.c \
fbsd-nat.c \
fbsd-tdep.c \
fork-child.c \
ft32-tdep.c \
glibc-tdep.c \
- go32-nat.c h8300-tdep.c \
+ go32-nat.c \
+ h8300-tdep.c \
+ hppa-bsd-tdep.c \
+ hppa-linux-nat.c \
+ hppa-linux-tdep.c \
+ hppa-nbsd-nat.c \
+ hppa-nbsd-tdep.c \
+ hppa-obsd-nat.c \
+ hppa-obsd-tdep.c \
hppa-tdep.c \
- hppa-linux-tdep.c hppa-linux-nat.c \
- hppabsd-tdep.c \
- hppanbsd-nat.c hppanbsd-tdep.c \
- hppaobsd-nat.c hppaobsd-tdep.c \
- i386-tdep.c i386-linux-nat.c \
- i386v4-nat.c i386-cygwin-tdep.c \
- i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
- i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
- i387-tdep.c \
- i386-darwin-tdep.c i386-darwin-nat.c \
+ i386-bsd-nat.c \
+ i386-bsd-tdep.c \
+ i386-cygwin-tdep.c \
+ i386-darwin-nat.c \
+ i386-darwin-tdep.c \
i386-dicos-tdep.c \
- i386-linux-tdep.c x86-nat.c \
- i386-sol2-nat.c i386-sol2-tdep.c \
- i386gnu-nat.c i386gnu-tdep.c \
- ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
- inf-ptrace.c \
+ i386-fbsd-nat.c \
+ i386-fbsd-tdep.c \
+ i386-gnu-nat.c \
+ i386-gnu-tdep.c \
+ i386-linux-nat.c \
+ i386-linux-tdep.c \
+ i386-nbsd-nat.c \
+ i386-nbsd-tdep.c \
+ i386-obsd-nat.c \
+ i386-obsd-tdep.c \
+ i386-sol2-nat.c \
+ i386-sol2-tdep.c \
+ i386-tdep.c \
+ i386-v4-nat.c \
+ i387-tdep.c \
ia64-libunwind-tdep.c \
+ ia64-linux-nat.c \
+ ia64-linux-tdep.c \
+ ia64-tdep.c \
+ ia64-vms-tdep.c \
+ inf-ptrace.c \
linux-fork.c \
- linux-tdep.c \
linux-record.c \
+ linux-tdep.c \
lm32-tdep.c \
- m68hc11-tdep.c \
+ m32r-linux-nat.c \
+ m32r-linux-tdep.c \
m32r-tdep.c \
- m32r-linux-nat.c m32r-linux-tdep.c \
+ m68hc11-tdep.c \
+ m68k-bsd-nat.c \
+ m68k-bsd-tdep.c \
+ m68k-linux-nat.c \
+ m68k-linux-tdep.c \
m68k-tdep.c \
- m68kbsd-nat.c m68kbsd-tdep.c \
- m68klinux-nat.c m68klinux-tdep.c \
- m88k-tdep.c m88kbsd-nat.c \
- microblaze-tdep.c microblaze-linux-tdep.c \
- mingw-hdep.c common/mingw-strerror.c \
- mips-linux-nat.c mips-linux-tdep.c \
+ m88k-bsd-nat.c \
+ m88k-tdep.c \
+ microblaze-linux-tdep.c \
+ microblaze-tdep.c \
+ mingw-hdep.c \
+ mips-fbsd-nat.c \
+ mips-fbsd-tdep.c \
+ mips-linux-nat.c \
+ mips-linux-tdep.c \
+ mips-nbsd-nat.c \
+ mips-nbsd-tdep.c \
mips-sde-tdep.c \
mips-tdep.c \
- mipsnbsd-nat.c mipsnbsd-tdep.c \
- mips64obsd-nat.c mips64obsd-tdep.c \
+ mips64-obsd-nat.c \
+ mips64-obsd-tdep.c \
msp430-tdep.c \
+ nbsd-nat.c \
+ nbsd-tdep.c \
nds32-tdep.c \
- nios2-tdep.c nios2-linux-tdep.c \
- nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
- posix-hdep.c common/posix-strerror.c \
- ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
- ppcfbsd-nat.c ppcfbsd-tdep.c \
- ppcnbsd-nat.c ppcnbsd-tdep.c \
- ppcobsd-nat.c ppcobsd-tdep.c \
+ nios2-linux-tdep.c \
+ nios2-tdep.c \
+ obsd-nat.c \
+ obsd-tdep.c \
+ posix-hdep.c \
+ ppc-fbsd-nat.c \
+ ppc-fbsd-tdep.c \
+ ppc-linux-nat.c \
+ ppc-linux-tdep.c \
+ ppc-nbsd-nat.c \
+ ppc-nbsd-tdep.c \
+ ppc-obsd-nat.c \
+ ppc-obsd-tdep.c \
+ ppc-ravenscar-thread.c \
+ ppc-sysv-tdep.c \
+ ppc64-tdep.c \
procfs.c \
ravenscar-thread.c \
remote-sim.c \
- dcache.c \
rl78-tdep.c \
- rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
rs6000-lynx178-tdep.c \
+ rs6000-nat.c \
+ rs6000-tdep.c \
rx-tdep.c \
- s390-linux-tdep.c s390-linux-nat.c \
+ s390-linux-nat.c \
+ s390-linux-tdep.c \
score-tdep.c \
- ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
- sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
+ ser-go32.c \
+ ser-mingw.c \
+ ser-pipe.c \
+ ser-tcp.c \
+ sh-nbsd-nat.c \
+ sh-nbsd-tdep.c \
+ sh-tdep.c \
+ sh64-tdep.c \
sol2-tdep.c \
+ solib-aix.c \
+ solib-spu.c \
solib-svr4.c \
- sparc-linux-nat.c sparc-linux-tdep.c \
- sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
- sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
- sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
- sparc64nbsd-nat.c sparc64nbsd-tdep.c \
- sparc64obsd-nat.c sparc64obsd-tdep.c \
- sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
+ sparc-linux-nat.c \
+ sparc-linux-tdep.c \
+ sparc-nat.c \
+ sparc-nbsd-nat.c \
+ sparc-nbsd-tdep.c \
+ sparc-obsd-tdep.c \
sparc-ravenscar-thread.c \
- spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
- tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
+ sparc-sol2-nat.c \
+ sparc-sol2-tdep.c \
+ sparc-tdep.c \
+ sparc64-fbsd-nat.c \
+ sparc64-fbsd-tdep.c \
+ sparc64-linux-nat.c \
+ sparc64-linux-tdep.c \
+ sparc64-nat.c \
+ sparc64-nbsd-nat.c \
+ sparc64-nbsd-tdep.c \
+ sparc64-obsd-nat.c \
+ sparc64-obsd-tdep.c \
+ sparc64-sol2-tdep.c \
+ sparc64-tdep.c \
+ spu-linux-nat.c \
+ spu-multiarch.c \
+ spu-tdep.c \
+ tilegx-linux-nat.c \
+ tilegx-linux-tdep.c \
+ tilegx-tdep.c \
v850-tdep.c \
- vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
- windows-nat.c windows-tdep.c \
+ vax-bsd-nat.c \
+ vax-nbsd-tdep.c \
+ vax-tdep.c \
+ windows-nat.c \
+ windows-tdep.c \
+ x86-nat.c \
xcoffread.c \
xstormy16-tdep.c \
- xtensa-tdep.c xtensa-config.c \
- xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
+ xtensa-config.c \
+ xtensa-linux-nat.c \
+ xtensa-linux-tdep.c \
+ xtensa-tdep.c \
+ xtensa-xtregs.c \
+ common/mingw-strerror.c \
+ common/posix-strerror.c
# Some files need explicit build rules (due to -Werror problems) or due
# to sub-directory fun 'n' games.
-# FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
-# errors. It turns out that that is the least of monitor.c's
-# problems. The function print_vsprintf appears to be using
-# va_arg(long) to extract CORE_ADDR parameters - something that
-# definitly will not work. "monitor.c" needs to be rewritten so that
-# it doesn't use format strings and instead uses callbacks.
-monitor.o: $(srcdir)/monitor.c
- $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
- $(COMPILE.post) $(srcdir)/monitor.c
- $(POSTCOMPILE)
-
# Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
# checks format strings.
printcmd.o: $(srcdir)/printcmd.c
$(COMPILE.post) $(srcdir)/printcmd.c
$(POSTCOMPILE)
+# Same for "target-float.c".
+target-float.o: $(srcdir)/target-float.c
+ $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
+ $(COMPILE.post) $(srcdir)/target-float.c
+
# ada-exp.c can appear in srcdir, for releases; or in ., for
# development builds.
ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
# Rules for generating translated message descriptions. Disabled by
# autoconf if the tools are not available.
-.SUFFIXES: .po .gmo .pox .pot
.PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
all-po: $(CATALOGS)
# N.B. We do not attempt to copy these into $(srcdir). The snapshot
# script does that.
-.po.gmo:
+%.gmo: %.po
-test -d po || mkdir po
$(GMSGFMT) --statistics -o $@ $<
# The new .po has to be gone over by hand, so we deposit it into
# build/po with a different extension. If build/po/$(PACKAGE).pot
# exists, use it (it was just created), else use the one in srcdir.
-.po.pox:
+%.pox: %.po
-test -d po || mkdir po
$(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
then echo po/$(PACKAGE).pot; \
# Strictly speaking c-exp.c should therefore depend on
# Makefile.in, but that was a pretty big annoyance.
-.SUFFIXES: .y .l
-.y.c:
+%.c: %.y
rm -f $@ $@.tmp
$(SHELL) $(YLWRAP) $< y.tab.c $@ -- $(YACC) $(YFLAGS) && mv $@ $@.tmp \
|| (rm -f $@; false)
-e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-e '/^#line.*y.tab.c/d' \
+ -e 's/YY_NULL/YY_NULLPTR/g' \
< $@.tmp > $@
rm -f $@.tmp
-.l.c:
+%.c: %.l
if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
$(FLEX) -o$@ $< && \
rm -f $@.new && \
.PRECIOUS: xml-builtin.c
-#
-# gdb/cli/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-cli-cmds.o: $(srcdir)/cli/cli-cmds.c
- $(COMPILE) $(srcdir)/cli/cli-cmds.c
- $(POSTCOMPILE)
-
-cli-decode.o: $(srcdir)/cli/cli-decode.c
- $(COMPILE) $(srcdir)/cli/cli-decode.c
- $(POSTCOMPILE)
-
-cli-dump.o: $(srcdir)/cli/cli-dump.c
- $(COMPILE) $(srcdir)/cli/cli-dump.c
- $(POSTCOMPILE)
-
-cli-interp.o: $(srcdir)/cli/cli-interp.c
- $(COMPILE) $(srcdir)/cli/cli-interp.c
- $(POSTCOMPILE)
-
-cli-logging.o: $(srcdir)/cli/cli-logging.c
- $(COMPILE) $(srcdir)/cli/cli-logging.c
- $(POSTCOMPILE)
-
-cli-script.o: $(srcdir)/cli/cli-script.c
- $(COMPILE) $(srcdir)/cli/cli-script.c
- $(POSTCOMPILE)
-
-cli-setshow.o: $(srcdir)/cli/cli-setshow.c
- $(COMPILE) $(srcdir)/cli/cli-setshow.c
- $(POSTCOMPILE)
-
-cli-utils.o: $(srcdir)/cli/cli-utils.c
- $(COMPILE) $(srcdir)/cli/cli-utils.c
- $(POSTCOMPILE)
-
-# GCC Compile support dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-compile.o: $(srcdir)/compile/compile.c
- $(COMPILE) $(srcdir)/compile/compile.c
- $(POSTCOMPILE)
-
-compile-c-types.o: $(srcdir)/compile/compile-c-types.c
- $(COMPILE) $(srcdir)/compile/compile-c-types.c
- $(POSTCOMPILE)
-
-compile-c-symbols.o: $(srcdir)/compile/compile-c-symbols.c
- $(COMPILE) $(srcdir)/compile/compile-c-symbols.c
- $(POSTCOMPILE)
-
-compile-object-load.o: $(srcdir)/compile/compile-object-load.c
- $(COMPILE) $(srcdir)/compile/compile-object-load.c
- $(POSTCOMPILE)
-
-compile-object-run.o: $(srcdir)/compile/compile-object-run.c
- $(COMPILE) $(srcdir)/compile/compile-object-run.c
- $(POSTCOMPILE)
-
-compile-loc2c.o: $(srcdir)/compile/compile-loc2c.c
- $(COMPILE) $(srcdir)/compile/compile-loc2c.c
- $(POSTCOMPILE)
-
-compile-c-support.o: $(srcdir)/compile/compile-c-support.c
- $(COMPILE) $(srcdir)/compile/compile-c-support.c
- $(POSTCOMPILE)
-
-
#
# GDBTK sub-directory
#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the mi directory.
all-gdbtk: insight$(EXEEXT)
-DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
-DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
-gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
- $(POSTCOMPILE)
-
-gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
- $(POSTCOMPILE)
-
-gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
- $(POSTCOMPILE)
-
-gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
- $(POSTCOMPILE)
-
-gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
- $(POSTCOMPILE)
-
-gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
- $(POSTCOMPILE)
-
-gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
- $(POSTCOMPILE)
-
-gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
- $(POSTCOMPILE)
-
-gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
- $(POSTCOMPILE)
-
-gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
- $(POSTCOMPILE)
-
-
-#
-# gdb/mi/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
- $(POSTCOMPILE)
-
-mi-cmd-catch.o: $(srcdir)/mi/mi-cmd-catch.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-catch.c
- $(POSTCOMPILE)
-
-mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
- $(POSTCOMPILE)
-
-mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
- $(POSTCOMPILE)
-
-mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
- $(POSTCOMPILE)
-
-mi-cmd-info.o: $(srcdir)/mi/mi-cmd-info.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-info.c
- $(POSTCOMPILE)
-
-mi-cmds.o: $(srcdir)/mi/mi-cmds.c
- $(COMPILE) $(srcdir)/mi/mi-cmds.c
- $(POSTCOMPILE)
-
-mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
- $(POSTCOMPILE)
-
-mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
- $(POSTCOMPILE)
-
-mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
- $(POSTCOMPILE)
-
-mi-console.o: $(srcdir)/mi/mi-console.c
- $(COMPILE) $(srcdir)/mi/mi-console.c
- $(POSTCOMPILE)
-
-mi-getopt.o: $(srcdir)/mi/mi-getopt.c
- $(COMPILE) $(srcdir)/mi/mi-getopt.c
- $(POSTCOMPILE)
-
-mi-interp.o: $(srcdir)/mi/mi-interp.c
- $(COMPILE) $(srcdir)/mi/mi-interp.c
- $(POSTCOMPILE)
-
-mi-main.o: $(srcdir)/mi/mi-main.c
- $(COMPILE) $(srcdir)/mi/mi-main.c
- $(POSTCOMPILE)
-
-mi-out.o: $(srcdir)/mi/mi-out.c
- $(COMPILE) $(srcdir)/mi/mi-out.c
- $(POSTCOMPILE)
-
-mi-parse.o: $(srcdir)/mi/mi-parse.c
- $(COMPILE) $(srcdir)/mi/mi-parse.c
- $(POSTCOMPILE)
-
-mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
- $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
- $(POSTCOMPILE)
-
-mi-common.o: $(srcdir)/mi/mi-common.c
- $(COMPILE) $(srcdir)/mi/mi-common.c
- $(POSTCOMPILE)
-
-# gdb/common/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-signals.o: $(srcdir)/common/signals.c
- $(COMPILE) $(srcdir)/common/signals.c
- $(POSTCOMPILE)
-
-common-utils.o: ${srcdir}/common/common-utils.c
- $(COMPILE) $(srcdir)/common/common-utils.c
- $(POSTCOMPILE)
-
-gdb_vecs.o: ${srcdir}/common/gdb_vecs.c
- $(COMPILE) $(srcdir)/common/gdb_vecs.c
- $(POSTCOMPILE)
-
-xml-utils.o: ${srcdir}/common/xml-utils.c
- $(COMPILE) $(srcdir)/common/xml-utils.c
- $(POSTCOMPILE)
-
-ptid.o: ${srcdir}/common/ptid.c
- $(COMPILE) $(srcdir)/common/ptid.c
- $(POSTCOMPILE)
-
-buffer.o: ${srcdir}/common/buffer.c
- $(COMPILE) $(srcdir)/common/buffer.c
- $(POSTCOMPILE)
-
-filestuff.o: $(srcdir)/common/filestuff.c
- $(COMPILE) $(srcdir)/common/filestuff.c
- $(POSTCOMPILE)
-
-format.o: ${srcdir}/common/format.c
- $(COMPILE) $(srcdir)/common/format.c
- $(POSTCOMPILE)
-
-common-agent.o: $(srcdir)/common/agent.c
- $(COMPILE) $(srcdir)/common/agent.c
- $(POSTCOMPILE)
-
-vec.o: ${srcdir}/common/vec.c
- $(COMPILE) $(srcdir)/common/vec.c
- $(POSTCOMPILE)
-
-print-utils.o: ${srcdir}/common/print-utils.c
- $(COMPILE) $(srcdir)/common/print-utils.c
- $(POSTCOMPILE)
-
-rsp-low.o: ${srcdir}/common/rsp-low.c
- $(COMPILE) $(srcdir)/common/rsp-low.c
- $(POSTCOMPILE)
-
-errors.o: ${srcdir}/common/errors.c
- $(COMPILE) $(srcdir)/common/errors.c
- $(POSTCOMPILE)
-
-common-debug.o: ${srcdir}/common/common-debug.c
- $(COMPILE) $(srcdir)/common/common-debug.c
- $(POSTCOMPILE)
-
-cleanups.o: ${srcdir}/common/cleanups.c
- $(COMPILE) $(srcdir)/common/cleanups.c
- $(POSTCOMPILE)
-
-common-exceptions.o: ${srcdir}/common/common-exceptions.c
- $(COMPILE) $(srcdir)/common/common-exceptions.c
- $(POSTCOMPILE)
-
-posix-strerror.o: ${srcdir}/common/posix-strerror.c
- $(COMPILE) $(srcdir)/common/posix-strerror.c
- $(POSTCOMPILE)
-
-mingw-strerror.o: ${srcdir}/common/mingw-strerror.c
- $(COMPILE) $(srcdir)/common/mingw-strerror.c
- $(POSTCOMPILE)
-
-btrace-common.o: ${srcdir}/common/btrace-common.c
- $(COMPILE) $(srcdir)/common/btrace-common.c
- $(POSTCOMPILE)
-
-fileio.o: ${srcdir}/common/fileio.c
- $(COMPILE) $(srcdir)/common/fileio.c
- $(POSTCOMPILE)
-
-common-regcache.o: ${srcdir}/common/common-regcache.c
- $(COMPILE) $(srcdir)/common/common-regcache.c
- $(POSTCOMPILE)
-
-signals-state-save-restore.o: $(srcdir)/common/signals-state-save-restore.c
- $(COMPILE) $(srcdir)/common/signals-state-save-restore.c
- $(POSTCOMPILE)
-
-new-op.o: ${srcdir}/common/new-op.c
- $(COMPILE) $(srcdir)/common/new-op.c
- $(POSTCOMPILE)
-
-#
-# gdb/target/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-waitstatus.o: ${srcdir}/target/waitstatus.c
- $(COMPILE) $(srcdir)/target/waitstatus.c
- $(POSTCOMPILE)
-
-#
-# gdb/arch/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-arm.o: ${srcdir}/arch/arm.c
- $(COMPILE) $(srcdir)/arch/arm.c
- $(POSTCOMPILE)
-
-arm-linux.o: ${srcdir}/arch/arm-linux.c
- $(COMPILE) $(srcdir)/arch/arm-linux.c
- $(POSTCOMPILE)
-
-arm-get-next-pcs.o: ${srcdir}/arch/arm-get-next-pcs.c
- $(COMPILE) $(srcdir)/arch/arm-get-next-pcs.c
- $(POSTCOMPILE)
-
-# gdb/nat/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-x86-dregs.o: ${srcdir}/nat/x86-dregs.c
- $(COMPILE) $(srcdir)/nat/x86-dregs.c
- $(POSTCOMPILE)
-
-linux-btrace.o: ${srcdir}/nat/linux-btrace.c
- $(COMPILE) $(srcdir)/nat/linux-btrace.c
- $(POSTCOMPILE)
-
-linux-osdata.o: ${srcdir}/nat/linux-osdata.c
- $(COMPILE) $(srcdir)/nat/linux-osdata.c
- $(POSTCOMPILE)
-
-linux-procfs.o: $(srcdir)/nat/linux-procfs.c
- $(COMPILE) $(srcdir)/nat/linux-procfs.c
- $(POSTCOMPILE)
-
-linux-ptrace.o: $(srcdir)/nat/linux-ptrace.c
- $(COMPILE) $(srcdir)/nat/linux-ptrace.c
- $(POSTCOMPILE)
-
-linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c
- $(COMPILE) $(srcdir)/nat/linux-waitpid.c
- $(POSTCOMPILE)
-
-mips-linux-watch.o: ${srcdir}/nat/mips-linux-watch.c
- $(COMPILE) $(srcdir)/nat/mips-linux-watch.c
- $(POSTCOMPILE)
-
-ppc-linux.o: ${srcdir}/nat/ppc-linux.c
- $(COMPILE) $(srcdir)/nat/ppc-linux.c
- $(POSTCOMPILE)
-
-linux-personality.o: ${srcdir}/nat/linux-personality.c
- $(COMPILE) $(srcdir)/nat/linux-personality.c
- $(POSTCOMPILE)
-
-x86-linux.o: ${srcdir}/nat/x86-linux.c
- $(COMPILE) $(srcdir)/nat/x86-linux.c
- $(POSTCOMPILE)
-
-x86-linux-dregs.o: ${srcdir}/nat/x86-linux-dregs.c
- $(COMPILE) $(srcdir)/nat/x86-linux-dregs.c
- $(POSTCOMPILE)
-
-amd64-linux-siginfo.o: ${srcdir}/nat/amd64-linux-siginfo.c
- $(COMPILE) $(srcdir)/nat/amd64-linux-siginfo.c
- $(POSTCOMPILE)
-
-linux-namespaces.o: ${srcdir}/nat/linux-namespaces.c
- $(COMPILE) $(srcdir)/nat/linux-namespaces.c
- $(POSTCOMPILE)
-
-aarch64-linux-hw-point.o: ${srcdir}/nat/aarch64-linux-hw-point.c
- $(COMPILE) $(srcdir)/nat/aarch64-linux-hw-point.c
- $(POSTCOMPILE)
-
-aarch64-linux.o: ${srcdir}/nat/aarch64-linux.c
- $(COMPILE) $(srcdir)/nat/aarch64-linux.c
- $(POSTCOMPILE)
-
-# gdb/arch/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-aarch64-insn.o: ${srcdir}/arch/aarch64-insn.c
- $(COMPILE) $(srcdir)/arch/aarch64-insn.c
- $(POSTCOMPILE)
-
#
-# gdb/tui/ dependencies
+# Dependency tracking.
#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-tui.o: $(srcdir)/tui/tui.c
- $(COMPILE) $(srcdir)/tui/tui.c
- $(POSTCOMPILE)
-
-tui-command.o: $(srcdir)/tui/tui-command.c
- $(COMPILE) $(srcdir)/tui/tui-command.c
- $(POSTCOMPILE)
-
-tui-data.o: $(srcdir)/tui/tui-data.c
- $(COMPILE) $(srcdir)/tui/tui-data.c
- $(POSTCOMPILE)
-
-tui-disasm.o: $(srcdir)/tui/tui-disasm.c
- $(COMPILE) $(srcdir)/tui/tui-disasm.c
- $(POSTCOMPILE)
-
-tui-file.o: $(srcdir)/tui/tui-file.c
- $(COMPILE) $(srcdir)/tui/tui-file.c
- $(POSTCOMPILE)
-
-tui-hooks.o: $(srcdir)/tui/tui-hooks.c
- $(COMPILE) $(srcdir)/tui/tui-hooks.c
- $(POSTCOMPILE)
-
-tui-interp.o: $(srcdir)/tui/tui-interp.c
- $(COMPILE) $(srcdir)/tui/tui-interp.c
- $(POSTCOMPILE)
-
-tui-io.o: $(srcdir)/tui/tui-io.c
- $(COMPILE) $(srcdir)/tui/tui-io.c
- $(POSTCOMPILE)
-
-tui-layout.o: $(srcdir)/tui/tui-layout.c
- $(COMPILE) $(srcdir)/tui/tui-layout.c
- $(POSTCOMPILE)
-
-tui-out.o: $(srcdir)/tui/tui-out.c
- $(COMPILE) $(srcdir)/tui/tui-out.c
- $(POSTCOMPILE)
-
-tui-regs.o: $(srcdir)/tui/tui-regs.c
- $(COMPILE) $(srcdir)/tui/tui-regs.c
- $(POSTCOMPILE)
-
-tui-source.o: $(srcdir)/tui/tui-source.c
- $(COMPILE) $(srcdir)/tui/tui-source.c
- $(POSTCOMPILE)
-
-tui-stack.o: $(srcdir)/tui/tui-stack.c
- $(COMPILE) $(srcdir)/tui/tui-stack.c
- $(POSTCOMPILE)
-
-tui-win.o: $(srcdir)/tui/tui-win.c
- $(COMPILE) $(srcdir)/tui/tui-win.c
- $(POSTCOMPILE)
-
-tui-windata.o: $(srcdir)/tui/tui-windata.c
- $(COMPILE) $(srcdir)/tui/tui-windata.c
- $(POSTCOMPILE)
-
-tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
- $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
- $(POSTCOMPILE)
-
-tui-winsource.o: $(srcdir)/tui/tui-winsource.c
- $(COMPILE) $(srcdir)/tui/tui-winsource.c
- $(POSTCOMPILE)
-
-# gdb/guile dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-guile.o: $(srcdir)/guile/guile.c
- $(COMPILE) $(srcdir)/guile/guile.c
- $(POSTCOMPILE)
-
-scm-arch.o: $(srcdir)/guile/scm-arch.c
- $(COMPILE) $(srcdir)/guile/scm-arch.c
- $(POSTCOMPILE)
-
-scm-auto-load.o: $(srcdir)/guile/scm-auto-load.c
- $(COMPILE) $(srcdir)/guile/scm-auto-load.c
- $(POSTCOMPILE)
-
-scm-block.o: $(srcdir)/guile/scm-block.c
- $(COMPILE) $(srcdir)/guile/scm-block.c
- $(POSTCOMPILE)
-
-scm-breakpoint.o: $(srcdir)/guile/scm-breakpoint.c
- $(COMPILE) $(srcdir)/guile/scm-breakpoint.c
- $(POSTCOMPILE)
-
-scm-cmd.o: $(srcdir)/guile/scm-cmd.c
- $(COMPILE) $(srcdir)/guile/scm-cmd.c
- $(POSTCOMPILE)
-
-scm-disasm.o: $(srcdir)/guile/scm-disasm.c
- $(COMPILE) $(srcdir)/guile/scm-disasm.c
- $(POSTCOMPILE)
-
-scm-exception.o: $(srcdir)/guile/scm-exception.c
- $(COMPILE) $(srcdir)/guile/scm-exception.c
- $(POSTCOMPILE)
-
-scm-frame.o: $(srcdir)/guile/scm-frame.c
- $(COMPILE) $(srcdir)/guile/scm-frame.c
- $(POSTCOMPILE)
-scm-gsmob.o: $(srcdir)/guile/scm-gsmob.c
- $(COMPILE) $(srcdir)/guile/scm-gsmob.c
- $(POSTCOMPILE)
-
-scm-iterator.o: $(srcdir)/guile/scm-iterator.c
- $(COMPILE) $(srcdir)/guile/scm-iterator.c
- $(POSTCOMPILE)
-
-scm-lazy-string.o: $(srcdir)/guile/scm-lazy-string.c
- $(COMPILE) $(srcdir)/guile/scm-lazy-string.c
- $(POSTCOMPILE)
-
-scm-math.o: $(srcdir)/guile/scm-math.c
- $(COMPILE) $(srcdir)/guile/scm-math.c
- $(POSTCOMPILE)
-
-scm-objfile.o: $(srcdir)/guile/scm-objfile.c
- $(COMPILE) $(srcdir)/guile/scm-objfile.c
- $(POSTCOMPILE)
-
-scm-param.o: $(srcdir)/guile/scm-param.c
- $(COMPILE) $(srcdir)/guile/scm-param.c
- $(POSTCOMPILE)
-
-scm-ports.o: $(srcdir)/guile/scm-ports.c
- $(COMPILE) $(srcdir)/guile/scm-ports.c
- $(POSTCOMPILE)
-
-scm-pretty-print.o: $(srcdir)/guile/scm-pretty-print.c
- $(COMPILE) $(srcdir)/guile/scm-pretty-print.c
- $(POSTCOMPILE)
-
-scm-progspace.o: $(srcdir)/guile/scm-progspace.c
- $(COMPILE) $(srcdir)/guile/scm-progspace.c
- $(POSTCOMPILE)
-
-scm-safe-call.o: $(srcdir)/guile/scm-safe-call.c
- $(COMPILE) $(srcdir)/guile/scm-safe-call.c
- $(POSTCOMPILE)
-
-scm-string.o: $(srcdir)/guile/scm-string.c
- $(COMPILE) $(srcdir)/guile/scm-string.c
- $(POSTCOMPILE)
-
-scm-symbol.o: $(srcdir)/guile/scm-symbol.c
- $(COMPILE) $(srcdir)/guile/scm-symbol.c
- $(POSTCOMPILE)
-
-scm-symtab.o: $(srcdir)/guile/scm-symtab.c
- $(COMPILE) $(srcdir)/guile/scm-symtab.c
- $(POSTCOMPILE)
-
-scm-type.o: $(srcdir)/guile/scm-type.c
- $(COMPILE) $(srcdir)/guile/scm-type.c
- $(POSTCOMPILE)
-
-scm-utils.o: $(srcdir)/guile/scm-utils.c
- $(COMPILE) $(srcdir)/guile/scm-utils.c
- $(POSTCOMPILE)
-
-scm-value.o: $(srcdir)/guile/scm-value.c
- $(COMPILE) $(srcdir)/guile/scm-value.c
- $(POSTCOMPILE)
-
-# gdb/python/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-# Flags needed to compile Python code
-PYTHON_CFLAGS=@PYTHON_CFLAGS@
-
-python.o: $(srcdir)/python/python.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
- $(POSTCOMPILE)
-
-py-arch.o: $(srcdir)/python/py-arch.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-arch.c
- $(POSTCOMPILE)
-
-py-auto-load.o: $(srcdir)/python/py-auto-load.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-auto-load.c
- $(POSTCOMPILE)
-
-py-block.o: $(srcdir)/python/py-block.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
- $(POSTCOMPILE)
-
-py-bpevent.o: $(srcdir)/python/py-bpevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-bpevent.c
- $(POSTCOMPILE)
-
-py-breakpoint.o: $(srcdir)/python/py-breakpoint.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c
- $(POSTCOMPILE)
-
-py-cmd.o: $(srcdir)/python/py-cmd.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
- $(POSTCOMPILE)
-
-py-continueevent.o: $(srcdir)/python/py-continueevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c
- $(POSTCOMPILE)
-
-py-xmethods.o: $(srcdir)/python/py-xmethods.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-xmethods.c
- $(POSTCOMPILE)
-
-py-event.o: $(srcdir)/python/py-event.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c
- $(POSTCOMPILE)
-
-py-evtregistry.o: $(srcdir)/python/py-evtregistry.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evtregistry.c
- $(POSTCOMPILE)
-
-py-evts.o: $(srcdir)/python/py-evts.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evts.c
- $(POSTCOMPILE)
-
-py-exitedevent.o: $(srcdir)/python/py-exitedevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-exitedevent.c
- $(POSTCOMPILE)
-
-py-finishbreakpoint.o: $(srcdir)/python/py-finishbreakpoint.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-finishbreakpoint.c
- $(POSTCOMPILE)
-
-py-frame.o: $(srcdir)/python/py-frame.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
- $(POSTCOMPILE)
-
-py-framefilter.o: $(srcdir)/python/py-framefilter.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-framefilter.c
- $(POSTCOMPILE)
-
-py-function.o: $(srcdir)/python/py-function.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
- $(POSTCOMPILE)
-
-py-gdb-readline.o: $(srcdir)/python/py-gdb-readline.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-gdb-readline.c
- $(POSTCOMPILE)
-
-py-inferior.o: $(srcdir)/python/py-inferior.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c
- $(POSTCOMPILE)
-
-py-infevents.o: $(srcdir)/python/py-infevents.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infevents.c
- $(POSTCOMPILE)
-
-py-infthread.o: $(srcdir)/python/py-infthread.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c
- $(POSTCOMPILE)
-
-py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
- $(POSTCOMPILE)
-
-py-linetable.o: $(srcdir)/python/py-linetable.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-linetable.c
- $(POSTCOMPILE)
-
-py-newobjfileevent.o: $(srcdir)/python/py-newobjfileevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-newobjfileevent.c
- $(POSTCOMPILE)
-
-py-objfile.o: $(srcdir)/python/py-objfile.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
- $(POSTCOMPILE)
-
-py-param.o: $(srcdir)/python/py-param.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-param.c
- $(POSTCOMPILE)
-
-py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
- $(POSTCOMPILE)
-
-py-progspace.o: $(srcdir)/python/py-progspace.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c
- $(POSTCOMPILE)
-
-py-signalevent.o: $(srcdir)/python/py-signalevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-signalevent.c
- $(POSTCOMPILE)
-
-py-stopevent.o: $(srcdir)/python/py-stopevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-stopevent.c
- $(POSTCOMPILE)
-
-py-symbol.o: $(srcdir)/python/py-symbol.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
- $(POSTCOMPILE)
-
-py-symtab.o: $(srcdir)/python/py-symtab.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
- $(POSTCOMPILE)
-
-py-threadevent.o: $(srcdir)/python/py-threadevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-threadevent.c
- $(POSTCOMPILE)
-
-py-type.o: $(srcdir)/python/py-type.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
- $(POSTCOMPILE)
-
-py-unwind.o: $(srcdir)/python/py-unwind.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-unwind.c
- $(POSTCOMPILE)
-
-py-utils.o: $(srcdir)/python/py-utils.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
- $(POSTCOMPILE)
-
-py-value.o: $(srcdir)/python/py-value.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
- $(POSTCOMPILE)
-
-py-varobj.o: $(srcdir)/python/py-varobj.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-varobj.c
- $(POSTCOMPILE)
-
-#
-# Dependency tracking. Most of this is conditional on GNU Make being
-# found by configure; if GNU Make is not found, we fall back to a
-# simpler scheme.
-#
-
-@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
+ifeq ($(DEPMODE),depmode=gcc3)
# Note that we put the dependencies into a .Tpo file, then move them
# into place if the compile succeeds. We need this because gcc does
# not atomically write the dependency output file.
-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo
-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po
-@GMAKE_TRUE@else
-@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
-@GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
+override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
+ -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
+override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
+ $(@D)/$(DEPDIR)/$(basename $(@F)).Po
+else
+override COMPILE.pre = source='$<' object='$@' libtool=no \
+ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
+ $(CXX) -x c++ $(CXX_DIALECT)
# depcomp handles atomicity for us, so we don't need a postcompile
# step.
-@GMAKE_TRUE@override POSTCOMPILE =
-@GMAKE_TRUE@endif
+override POSTCOMPILE =
+endif
# A list of all the objects we might care about in this build, for
# dependency tracking.
all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
test-cp-name-parser.o
+# All the .deps files to include.
+all_deps_files = $(foreach dep,$(patsubst %.o,%.Po,$(all_object_files)),\
+ $(dir $(dep))/$(DEPDIR)/$(notdir $(dep)))
+
# Ensure that generated files are created early. Use order-only
# dependencies if available. They require GNU make 3.80 or newer,
# and the .VARIABLES variable was introduced at the same time.
-@GMAKE_TRUE@ifdef .VARIABLES
-@GMAKE_TRUE@$(all_object_files): | $(generated_files)
-@GMAKE_TRUE@else
+ifdef .VARIABLES
+$(all_object_files): | $(generated_files)
+else
$(all_object_files) : $(generated_files)
-@GMAKE_TRUE@endif
+endif
# Dependencies.
-@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
+-include $(all_deps_files)
+
+# Disable implicit make rules.
+include $(srcdir)/disable-implicit-rules.mk
### end of the gdb Makefile.in.
projects / thirdparty / binutils-gdb.git / blobdiff