static void tcatch_command (char *arg, int from_tty);
-static void detach_single_step_breakpoints (void);
-
-static int find_single_step_breakpoint (struct address_space *aspace,
- CORE_ADDR pc);
-
static void free_bp_location (struct bp_location *loc);
static void incref_bp_location (struct bp_location *loc);
static void decref_bp_location (struct bp_location **loc);
/* One (or perhaps two) breakpoints used for software single
stepping. */
-static void *single_step_breakpoints[2];
-static struct gdbarch *single_step_gdbarch[2];
+static struct breakpoint *single_step_breakpoints;
/* The style in which to perform a dynamic printf. This is a user
option because different output options have different tradeoffs;
one_breakpoint_xfer_memory (readbuf, writebuf, writebuf_org,
memaddr, len, &bl->target_info, bl->gdbarch);
}
-
- /* Now process single-step breakpoints. These are not found in the
- bp_location array. */
- for (i = 0; i < 2; i++)
- {
- struct bp_target_info *bp_tgt = single_step_breakpoints[i];
-
- if (bp_tgt != NULL)
- {
- struct gdbarch *gdbarch = single_step_gdbarch[i];
-
- one_breakpoint_xfer_memory (readbuf, writebuf, writebuf_org,
- memaddr, len, bp_tgt, gdbarch);
- }
- }
}
\f
continue;
}
+ /* Just like single-step breakpoints. */
+ if (b->type == bp_single_step)
+ {
+ delete_breakpoint (b);
+ continue;
+ }
+
/* Longjmp and longjmp-resume breakpoints are also meaningless
after an exec. */
if (b->type == bp_longjmp || b->type == bp_longjmp_resume
val |= remove_breakpoint_1 (bl, mark_inserted);
}
- /* Detach single-step breakpoints as well. */
- detach_single_step_breakpoints ();
-
do_cleanups (old_chain);
return val;
}
/* Also remove step-resume breakpoints. */
+ case bp_single_step:
+
+ /* Also remove single-step breakpoints. */
+
delete_breakpoint (b);
break;
}
}
+ /* Check if a moribund breakpoint explains the stop. */
for (ix = 0; VEC_iterate (bp_location_p, moribund_locations, ix, loc); ++ix)
{
if (breakpoint_location_address_match (loc, aspace, bp_addr))
break;
case bp_breakpoint:
case bp_hardware_breakpoint:
+ case bp_single_step:
case bp_until:
case bp_finish:
case bp_shlib_event:
{bp_none, "?deleted?"},
{bp_breakpoint, "breakpoint"},
{bp_hardware_breakpoint, "hw breakpoint"},
+ {bp_single_step, "sw single-step"},
{bp_until, "until"},
{bp_finish, "finish"},
{bp_watchpoint, "watchpoint"},
case bp_breakpoint:
case bp_hardware_breakpoint:
+ case bp_single_step:
case bp_until:
case bp_finish:
case bp_longjmp:
have their addresses modified. */
return bpaddr;
}
+ else if (bptype == bp_single_step)
+ {
+ /* Single-step breakpoints should not have their addresses
+ modified. If there's any architectural constrain that
+ applies to this address, then it should have already been
+ taken into account when the breakpoint was created in the
+ first place. If we didn't do this, stepping through e.g.,
+ Thumb-2 IT blocks would break. */
+ return bpaddr;
+ }
else
{
CORE_ADDR adjusted_bpaddr;
switch (owner->type)
{
case bp_breakpoint:
+ case bp_single_step:
case bp_until:
case bp_finish:
case bp_longjmp:
breakpoint_re_set ();
}
+/* Create a new single-step breakpoint for thread THREAD, with no
+ locations. */
-/* Set a breakpoint that will evaporate an end of command
- at address specified by SAL.
- Restrict it to frame FRAME if FRAME is nonzero. */
+static struct breakpoint *
+new_single_step_breakpoint (int thread, struct gdbarch *gdbarch)
+{
+ struct breakpoint *b = XNEW (struct breakpoint);
+
+ init_raw_breakpoint_without_location (b, gdbarch, bp_single_step,
+ &momentary_breakpoint_ops);
+
+ b->disposition = disp_donttouch;
+ b->frame_id = null_frame_id;
+
+ b->thread = thread;
+ gdb_assert (b->thread != 0);
+
+ add_to_breakpoint_chain (b);
+
+ return b;
+}
+
+/* Set a momentary breakpoint of type TYPE at address specified by
+ SAL. If FRAME_ID is valid, the breakpoint is restricted to that
+ frame. */
struct breakpoint *
set_momentary_breakpoint (struct gdbarch *gdbarch, struct symtab_and_line sal,
bkpt_insert_location (struct bp_location *bl)
{
if (bl->loc_type == bp_loc_hardware_breakpoint)
- return target_insert_hw_breakpoint (bl->gdbarch,
- &bl->target_info);
+ return target_insert_hw_breakpoint (bl->gdbarch, &bl->target_info);
else
- {
- struct bp_target_info *bp_tgt = &bl->target_info;
- int ret;
- int sss_slot;
-
- /* There is no need to insert a breakpoint if an unconditional
- raw/sss breakpoint is already inserted at that location. */
- sss_slot = find_single_step_breakpoint (bp_tgt->placed_address_space,
- bp_tgt->reqstd_address);
- if (sss_slot >= 0)
- {
- struct bp_target_info *sss_bp_tgt = single_step_breakpoints[sss_slot];
-
- bp_target_info_copy_insertion_state (bp_tgt, sss_bp_tgt);
- return 0;
- }
-
- return target_insert_breakpoint (bl->gdbarch, bp_tgt);
- }
+ return target_insert_breakpoint (bl->gdbarch, &bl->target_info);
}
static int
if (bl->loc_type == bp_loc_hardware_breakpoint)
return target_remove_hw_breakpoint (bl->gdbarch, &bl->target_info);
else
- {
- struct bp_target_info *bp_tgt = &bl->target_info;
- struct address_space *aspace = bp_tgt->placed_address_space;
- CORE_ADDR address = bp_tgt->reqstd_address;
-
- /* Only remove the breakpoint if there is no raw/sss breakpoint
- still inserted at this location. Otherwise, we would be
- effectively disabling the raw/sss breakpoint. */
- if (single_step_breakpoint_inserted_here_p (aspace, address))
- return 0;
-
- return target_remove_breakpoint (bl->gdbarch, bp_tgt);
- }
+ return target_remove_breakpoint (bl->gdbarch, &bl->target_info);
}
static int
struct address_space *aspace,
CORE_ADDR next_pc)
{
- void **bpt_p;
+ struct thread_info *tp = inferior_thread ();
+ struct symtab_and_line sal;
+ CORE_ADDR pc = next_pc;
- if (single_step_breakpoints[0] == NULL)
- {
- bpt_p = &single_step_breakpoints[0];
- single_step_gdbarch[0] = gdbarch;
- }
- else
- {
- gdb_assert (single_step_breakpoints[1] == NULL);
- bpt_p = &single_step_breakpoints[1];
- single_step_gdbarch[1] = gdbarch;
- }
+ if (single_step_breakpoints == NULL)
+ single_step_breakpoints = new_single_step_breakpoint (tp->num, gdbarch);
- /* NOTE drow/2006-04-11: A future improvement to this function would
- be to only create the breakpoints once, and actually put them on
- the breakpoint chain. That would let us use set_raw_breakpoint.
- We could adjust the addresses each time they were needed. Doing
- this requires corresponding changes elsewhere where single step
- breakpoints are handled, however. So, for now, we use this. */
+ sal = find_pc_line (pc, 0);
+ sal.pc = pc;
+ sal.section = find_pc_overlay (pc);
+ sal.explicit_pc = 1;
+ add_location_to_breakpoint (single_step_breakpoints, &sal);
- *bpt_p = deprecated_insert_raw_breakpoint (gdbarch, aspace, next_pc);
- if (*bpt_p == NULL)
- error (_("Could not insert single-step breakpoint at %s"),
- paddress (gdbarch, next_pc));
+ update_global_location_list (UGLL_INSERT);
}
/* Check if the breakpoints used for software single stepping
int
single_step_breakpoints_inserted (void)
{
- return (single_step_breakpoints[0] != NULL
- || single_step_breakpoints[1] != NULL);
+ return (single_step_breakpoints != NULL);
}
/* Remove and delete any breakpoints used for software single step. */
void
remove_single_step_breakpoints (void)
{
- gdb_assert (single_step_breakpoints[0] != NULL);
+ gdb_assert (single_step_breakpoints != NULL);
- /* See insert_single_step_breakpoint for more about this deprecated
- call. */
- deprecated_remove_raw_breakpoint (single_step_gdbarch[0],
- single_step_breakpoints[0]);
- single_step_gdbarch[0] = NULL;
- single_step_breakpoints[0] = NULL;
+ delete_breakpoint (single_step_breakpoints);
- if (single_step_breakpoints[1] != NULL)
- {
- deprecated_remove_raw_breakpoint (single_step_gdbarch[1],
- single_step_breakpoints[1]);
- single_step_gdbarch[1] = NULL;
- single_step_breakpoints[1] = NULL;
- }
+ single_step_breakpoints = NULL;
}
/* Delete software single step breakpoints without removing them from
void
cancel_single_step_breakpoints (void)
{
- int i;
-
- for (i = 0; i < 2; i++)
- if (single_step_breakpoints[i])
- {
- xfree (single_step_breakpoints[i]);
- single_step_breakpoints[i] = NULL;
- single_step_gdbarch[i] = NULL;
- }
-}
-
-/* Detach software single-step breakpoints from INFERIOR_PTID without
- removing them. */
-
-static void
-detach_single_step_breakpoints (void)
-{
- int i;
-
- for (i = 0; i < 2; i++)
- if (single_step_breakpoints[i])
- target_remove_breakpoint (single_step_gdbarch[i],
- single_step_breakpoints[i]);
+ /* We don't really need to (or should) delete them here. After an
+ exit, breakpoint_init_inferior deletes it. After an exec,
+ update_breakpoints_after_exec does it. Just clear our
+ reference. */
+ single_step_breakpoints = NULL;
}
-/* Find the software single-step breakpoint that inserted at PC.
- Returns its slot if found, and -1 if not found. */
+/* Check whether any location of BP is inserted at PC. */
static int
-find_single_step_breakpoint (struct address_space *aspace,
- CORE_ADDR pc)
+breakpoint_has_location_inserted_here (struct breakpoint *bp,
+ struct address_space *aspace,
+ CORE_ADDR pc)
{
- int i;
+ struct bp_location *loc;
- for (i = 0; i < 2; i++)
- {
- struct bp_target_info *bp_tgt = single_step_breakpoints[i];
- if (bp_tgt
- && breakpoint_address_match (bp_tgt->placed_address_space,
- bp_tgt->reqstd_address,
- aspace, pc))
- return i;
- }
+ for (loc = bp->loc; loc != NULL; loc = loc->next)
+ if (loc->inserted
+ && breakpoint_location_address_match (loc, aspace, pc))
+ return 1;
- return -1;
+ return 0;
}
/* Check whether a software single-step breakpoint is inserted at
single_step_breakpoint_inserted_here_p (struct address_space *aspace,
CORE_ADDR pc)
{
- return find_single_step_breakpoint (aspace, pc) >= 0;
+ return (single_step_breakpoints != NULL
+ && breakpoint_has_location_inserted_here (single_step_breakpoints,
+ aspace, pc));
}
/* Returns 0 if 'bp' is NOT a syscall catchpoint,
projects / thirdparty / binutils-gdb.git / blobdiff