# Architecture commands for GDB, the GNU debugger.
#
-# Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-# Free Software Foundation, Inc.
+# Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
+# 2008, 2009 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
# An optional expression that convers MEMBER to a value
# suitable for formatting using %s.
- # If PRINT is empty, paddr_nz (for CORE_ADDR) or paddr_d
- # (anything else) is used.
+ # If PRINT is empty, core_addr_to_string_nz (for CORE_ADDR)
+ # or plongest (anything else) is used.
garbage_at_eol ) : ;;
i:const struct bfd_arch_info *:bfd_arch_info:::&bfd_default_arch_struct::::gdbarch_bfd_arch_info (gdbarch)->printable_name
#
i:int:byte_order:::BFD_ENDIAN_BIG
+i:int:byte_order_for_code:::BFD_ENDIAN_BIG
#
i:enum gdb_osabi:osabi:::GDB_OSABI_UNKNOWN
#
-i:const struct target_desc *:target_desc:::::::paddr_d ((long) gdbarch->target_desc)
+i:const struct target_desc *:target_desc:::::::host_address_to_string (gdbarch->target_desc)
+
+# The bit byte-order has to do just with numbering of bits in debugging symbols
+# and such. Conceptually, it's quite separate from byte/word byte order.
+v:int:bits_big_endian:::1:(gdbarch->byte_order == BFD_ENDIAN_BIG)::0
+
# Number of bits in a char or unsigned char for the target machine.
# Just like CHAR_BIT in <limits.h> but describes the target machine.
# v:TARGET_CHAR_BIT:int:char_bit::::8 * sizeof (char):8::0:
v:int:ps_regnum:::-1:-1::0
v:int:fp0_regnum:::0:-1::0
# Convert stab register number (from \`r\' declaration) to a gdb REGNUM.
-f:int:stab_reg_to_regnum:int stab_regnr:stab_regnr::no_op_reg_to_regnum::0
+m:int:stab_reg_to_regnum:int stab_regnr:stab_regnr::no_op_reg_to_regnum::0
# Provide a default mapping from a ecoff register number to a gdb REGNUM.
-f:int:ecoff_reg_to_regnum:int ecoff_regnr:ecoff_regnr::no_op_reg_to_regnum::0
-# Provide a default mapping from a DWARF register number to a gdb REGNUM.
-f:int:dwarf_reg_to_regnum:int dwarf_regnr:dwarf_regnr::no_op_reg_to_regnum::0
+m:int:ecoff_reg_to_regnum:int ecoff_regnr:ecoff_regnr::no_op_reg_to_regnum::0
# Convert from an sdb register number to an internal gdb register number.
-f:int:sdb_reg_to_regnum:int sdb_regnr:sdb_regnr::no_op_reg_to_regnum::0
-f:int:dwarf2_reg_to_regnum:int dwarf2_regnr:dwarf2_regnr::no_op_reg_to_regnum::0
+m:int:sdb_reg_to_regnum:int sdb_regnr:sdb_regnr::no_op_reg_to_regnum::0
+# Provide a default mapping from a DWARF2 register number to a gdb REGNUM.
+m:int:dwarf2_reg_to_regnum:int dwarf2_regnr:dwarf2_regnr::no_op_reg_to_regnum::0
m:const char *:register_name:int regnr:regnr::0
# Return the type of a register specified by the architecture. Only
M:struct type *:register_type:int reg_nr:reg_nr
# See gdbint.texinfo, and PUSH_DUMMY_CALL.
-M:struct frame_id:unwind_dummy_id:struct frame_info *info:info
-# Implement UNWIND_DUMMY_ID and PUSH_DUMMY_CALL, then delete
+M:struct frame_id:dummy_id:struct frame_info *this_frame:this_frame
+# Implement DUMMY_ID and PUSH_DUMMY_CALL, then delete
# deprecated_fp_regnum.
v:int:deprecated_fp_regnum:::-1:-1::0
M:void:print_vector_info:struct ui_file *file, struct frame_info *frame, const char *args:file, frame, args
# MAP a GDB RAW register number onto a simulator register number. See
# also include/...-sim.h.
-f:int:register_sim_regno:int reg_nr:reg_nr::legacy_register_sim_regno::0
+m:int:register_sim_regno:int reg_nr:reg_nr::legacy_register_sim_regno::0
m:int:cannot_fetch_register:int regnum:regnum::cannot_register_not::0
m:int:cannot_store_register:int regnum:regnum::cannot_register_not::0
# setjmp/longjmp support.
f:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
M:CORE_ADDR:integer_to_address:struct type *type, const gdb_byte *buf:type, buf
-# It has been suggested that this, well actually its predecessor,
-# should take the type/value of the function to be called and not the
-# return type. This is left as an exercise for the reader.
-
-M:enum return_value_convention:return_value:struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:valtype, regcache, readbuf, writebuf
-
-f:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
+# Return the return-value convention that will be used by FUNCTYPE
+# to return a value of type VALTYPE. FUNCTYPE may be NULL in which
+# case the return convention is computed based only on VALTYPE.
+#
+# If READBUF is not NULL, extract the return value and save it in this buffer.
+#
+# If WRITEBUF is not NULL, it contains a return value which will be
+# stored into the appropriate register. This can be used when we want
+# to force the value returned by a function (see the "return" command
+# for instance).
+M:enum return_value_convention:return_value:struct type *functype, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:functype, valtype, regcache, readbuf, writebuf
+
+m:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
+M:CORE_ADDR:skip_main_prologue:CORE_ADDR ip:ip
f:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs:0:0
m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:
M:CORE_ADDR:adjust_breakpoint_address:CORE_ADDR bpaddr:bpaddr
-f:int:memory_insert_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_insert_breakpoint::0
-f:int:memory_remove_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_remove_breakpoint::0
+m:int:memory_insert_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_insert_breakpoint::0
+m:int:memory_remove_breakpoint:struct bp_target_info *bp_tgt:bp_tgt:0:default_memory_remove_breakpoint::0
v:CORE_ADDR:decr_pc_after_break:::0:::0
# A function can be addressed by either it's "pointer" (possibly a
# being a few stray bits in the PC which would mislead us, not as some
# sort of generic thing to handle alignment or segmentation (it's
# possible it should be in TARGET_READ_PC instead).
-f:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
+m:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
# It is not at all clear why gdbarch_smash_text_address is not folded into
# gdbarch_addr_bits_remove.
-f:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0
+m:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0
# FIXME/cagney/2001-01-18: This should be split in two. A target method that
# indicates if the target needs software single step. An ISA method to
f:CORE_ADDR:skip_trampoline_code:struct frame_info *frame, CORE_ADDR pc:frame, pc::generic_skip_trampoline_code::0
-# If IN_SOLIB_DYNSYM_RESOLVE_CODE returns true, and SKIP_SOLIB_RESOLVER
+# If in_solib_dynsym_resolve_code() returns true, and SKIP_SOLIB_RESOLVER
# evaluates non-zero, this is the address where the debugger will place
# a step-resume breakpoint to get us past the dynamic linker.
m:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc::generic_skip_solib_resolver::0
m:char *:construct_inferior_arguments:int argc, char **argv:argc, argv::construct_inferior_arguments::0
f:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym::default_elf_make_msymbol_special::0
f:void:coff_make_msymbol_special:int val, struct minimal_symbol *msym:val, msym::default_coff_make_msymbol_special::0
-v:const char *:name_of_malloc:::"malloc":"malloc"::0:gdbarch->name_of_malloc
v:int:cannot_step_breakpoint:::0:0::0
v:int:have_nonsteppable_watchpoint:::0:0::0
F:int:address_class_type_flags:int byte_size, int dwarf2_addr_class:byte_size, dwarf2_addr_class
# name SECT_NAME and size SECT_SIZE.
M:const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
+# When creating core dumps, some systems encode the PID in addition
+# to the LWP id in core file register section names. In those cases, the
+# "XXX" in ".reg/XXX" is encoded as [LWPID << 16 | PID]. This setting
+# is set to true for such architectures; false if "XXX" represents an LWP
+# or thread id with no special encoding.
+v:int:core_reg_section_encodes_pid:::0:0::0
+
+# Supported register notes in a core file.
+v:struct core_regset_section *:core_regset_sections:const char *name, int len::::::host_address_to_string (gdbarch->core_regset_sections)
+
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
# core file into buffer READBUF with length LEN.
M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
+# How the core_stratum layer converts a PTID from a core file to a
+# string.
+M:char *:core_pid_to_str:ptid_t ptid:ptid
+
# If the elements of C++ vtables are in-place function descriptors rather
# than normal function pointers (which may point to code or a descriptor),
# set this to one.
# Advance PC to next instruction in order to skip a permanent breakpoint.
F:void:skip_permanent_breakpoint:struct regcache *regcache:regcache
+# The maximum length of an instruction on this architecture.
+V:ULONGEST:max_insn_length:::0:0
+
+# Copy the instruction at FROM to TO, and make any adjustments
+# necessary to single-step it at that address.
+#
+# REGS holds the state the thread's registers will have before
+# executing the copied instruction; the PC in REGS will refer to FROM,
+# not the copy at TO. The caller should update it to point at TO later.
+#
+# Return a pointer to data of the architecture's choice to be passed
+# to gdbarch_displaced_step_fixup. Or, return NULL to indicate that
+# the instruction's effects have been completely simulated, with the
+# resulting state written back to REGS.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+#
+# The TO area is only guaranteed to have space for
+# gdbarch_max_insn_length (arch) bytes, so this function must not
+# write more bytes than that to that area.
+#
+# If you do not provide this function, GDB assumes that the
+# architecture does not support displaced stepping.
+#
+# If your architecture doesn't need to adjust instructions before
+# single-stepping them, consider using simple_displaced_step_copy_insn
+# here.
+M:struct displaced_step_closure *:displaced_step_copy_insn:CORE_ADDR from, CORE_ADDR to, struct regcache *regs:from, to, regs
+
+# Fix up the state resulting from successfully single-stepping a
+# displaced instruction, to give the result we would have gotten from
+# stepping the instruction in its original location.
+#
+# REGS is the register state resulting from single-stepping the
+# displaced instruction.
+#
+# CLOSURE is the result from the matching call to
+# gdbarch_displaced_step_copy_insn.
+#
+# If you provide gdbarch_displaced_step_copy_insn.but not this
+# function, then GDB assumes that no fixup is needed after
+# single-stepping the instruction.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+M:void:displaced_step_fixup:struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs:closure, from, to, regs::NULL
+
+# Free a closure returned by gdbarch_displaced_step_copy_insn.
+#
+# If you provide gdbarch_displaced_step_copy_insn, you must provide
+# this function as well.
+#
+# If your architecture uses closures that don't need to be freed, then
+# you can use simple_displaced_step_free_closure here.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+m:void:displaced_step_free_closure:struct displaced_step_closure *closure:closure::NULL::(! gdbarch->displaced_step_free_closure) != (! gdbarch->displaced_step_copy_insn)
+
+# Return the address of an appropriate place to put displaced
+# instructions while we step over them. There need only be one such
+# place, since we're only stepping one thread over a breakpoint at a
+# time.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+m:CORE_ADDR:displaced_step_location:void:::NULL::(! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn)
+
# Refresh overlay mapped state for section OSECT.
F:void:overlay_update:struct obj_section *osect:osect
F:char *:static_transform_name:char *name:name
# Set if the address in N_SO or N_FUN stabs may be zero.
v:int:sofun_address_maybe_missing:::0:0::0
+
+# Signal translation: translate inferior's signal (host's) number into
+# GDB's representation.
+m:enum target_signal:target_signal_from_host:int signo:signo::default_target_signal_from_host::0
+# Signal translation: translate GDB's signal number into inferior's host
+# signal number.
+m:int:target_signal_to_host:enum target_signal ts:ts::default_target_signal_to_host::0
+
+# Extra signal info inspection.
+#
+# Return a type suitable to inspect extra signal information.
+M:struct type *:get_siginfo_type:void:
+
+# Record architecture-specific information from the symbol table.
+M:void:record_special_symbol:struct objfile *objfile, asymbol *sym:objfile, sym
+
+# True if the list of shared libraries is one and only for all
+# processes, as opposed to a list of shared libraries per inferior.
+# When this property is true, GDB assumes that since shared libraries
+# are shared across processes, so is all code. Hence, GDB further
+# assumes an inserted breakpoint location is visible to all processes.
+v:int:has_global_solist:::0:0::0
EOF
}
struct obstack;
struct bp_target_info;
struct target_desc;
+struct displaced_step_closure;
+struct core_regset_section;
extern struct gdbarch *current_gdbarch;
+extern struct gdbarch *target_gdbarch;
EOF
# function typedef's
/* Use default: BFD_ENDIAN_UNKNOWN (NB: is not ZERO). */
int byte_order;
+ int byte_order_for_code;
+
/* Use default: NULL (ZERO). */
bfd *abfd;
#include "gdb_assert.h"
#include "gdb_string.h"
-#include "gdb-events.h"
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
+#include "observer.h"
+#include "regcache.h"
/* Static function declarations */
};
struct gdbarch *current_gdbarch = &startup_gdbarch;
+struct gdbarch *target_gdbarch = &startup_gdbarch;
EOF
# Create a new gdbarch struct
void
gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file)
{
- const char *gdb_xm_file = "<not-defined>";
const char *gdb_nm_file = "<not-defined>";
- const char *gdb_tm_file = "<not-defined>";
-#if defined (GDB_XM_FILE)
- gdb_xm_file = GDB_XM_FILE;
-#endif
- fprintf_unfiltered (file,
- "gdbarch_dump: GDB_XM_FILE = %s\\n",
- gdb_xm_file);
#if defined (GDB_NM_FILE)
gdb_nm_file = GDB_NM_FILE;
#endif
fprintf_unfiltered (file,
"gdbarch_dump: GDB_NM_FILE = %s\\n",
gdb_nm_file);
-#if defined (GDB_TM_FILE)
- gdb_tm_file = GDB_TM_FILE;
-#endif
- fprintf_unfiltered (file,
- "gdbarch_dump: GDB_TM_FILE = %s\\n",
- gdb_tm_file);
EOF
function_list | sort -t: -k 3 | while do_read
do
if class_is_function_p
then
printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: ${function} = <0x%%lx>\\\\n\",\n"
- printf " (long) gdbarch->${function});\n"
+ printf " \"gdbarch_dump: ${function} = <%%s>\\\\n\",\n"
+ printf " host_address_to_string (gdbarch->${function}));\n"
else
# It is a variable
case "${print}:${returntype}" in
:CORE_ADDR )
- fmt="0x%s"
- print="paddr_nz (gdbarch->${function})"
+ fmt="%s"
+ print="core_addr_to_string_nz (gdbarch->${function})"
;;
:* )
fmt="%s"
- print="paddr_d (gdbarch->${function})"
+ print="plongest (gdbarch->${function})"
;;
* )
fmt="%s"
}
/* log it */
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "register_gdbarch_init (%s, 0x%08lx)\n",
+ fprintf_unfiltered (gdb_stdlog, "register_gdbarch_init (%s, %s)\n",
bfd_arch_info->printable_name,
- (long) init);
+ host_address_to_string (init));
/* Append it */
(*curr) = XMALLOC (struct gdbarch_registration);
(*curr)->bfd_architecture = bfd_architecture;
"find_arch_by_info: info.osabi %d (%s)\n",
info.osabi, gdbarch_osabi_name (info.osabi));
fprintf_unfiltered (gdb_stdlog,
- "find_arch_by_info: info.abfd 0x%lx\n",
- (long) info.abfd);
+ "find_arch_by_info: info.abfd %s\n",
+ host_address_to_string (info.abfd));
fprintf_unfiltered (gdb_stdlog,
- "find_arch_by_info: info.tdep_info 0x%lx\n",
- (long) info.tdep_info);
+ "find_arch_by_info: info.tdep_info %s\n",
+ host_address_to_string (info.tdep_info));
}
/* Find the tdep code that knows about this architecture. */
struct gdbarch_list *this;
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
- "Previous architecture 0x%08lx (%s) selected\n",
- (long) new_gdbarch,
+ "Previous architecture %s (%s) selected\n",
+ host_address_to_string (new_gdbarch),
new_gdbarch->bfd_arch_info->printable_name);
/* Find the existing arch in the list. */
for (list = ®o->arches;
/* It's a new architecture. */
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
- "New architecture 0x%08lx (%s) selected\n",
- (long) new_gdbarch,
+ "New architecture %s (%s) selected\n",
+ host_address_to_string (new_gdbarch),
new_gdbarch->bfd_arch_info->printable_name);
/* Insert the new architecture into the front of the architecture
gdb_assert (current_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
current_gdbarch = new_gdbarch;
- architecture_changed_event ();
- reinit_frame_cache ();
+ target_gdbarch = new_gdbarch;
+ observer_notify_architecture_changed (new_gdbarch);
+ registers_changed ();
}
extern void _initialize_gdbarch (void);
projects / thirdparty / binutils-gdb.git / blobdiff