/* Native debugging support for Intel x86 running DJGPP.
- Copyright 1997, 1999 Free Software Foundation, Inc.
+ Copyright 1997, 1999, 2001 Free Software Foundation, Inc.
Written by Robert Hoehne.
This file is part of GDB.
#include <fcntl.h>
#include "defs.h"
-#include "frame.h" /* required by inferior.h */
#include "inferior.h"
-#include "target.h"
-#include "wait.h"
+#include "gdb_wait.h"
#include "gdbcore.h"
#include "command.h"
#include "floatformat.h"
+#include "buildsym.h"
+#include "i387-nat.h"
+#include "regcache.h"
#include <stdio.h> /* required for __DJGPP_MINOR__ */
#include <stdlib.h>
#include <string.h>
+#include <errno.h>
#include <unistd.h>
+#include <io.h>
+#include <dpmi.h>
#include <debug/v2load.h>
#include <debug/dbgcom.h>
+#if __DJGPP_MINOR__ > 2
+#include <debug/redir.h>
+#endif
#if __DJGPP_MINOR__ < 3
/* This code will be provided from DJGPP 2.03 on. Until then I code it
{
asm ("frstor %0":"=m" (npx));
}
+/* ------------------------------------------------------------------------- */
+/* Stubs for the missing redirection functions. */
+typedef struct {
+ char *command;
+ int redirected;
+} cmdline_t;
+
+void redir_cmdline_delete (cmdline_t *ptr) {ptr->redirected = 0;}
+int redir_cmdline_parse (const char *args, cmdline_t *ptr)
+{
+ return -1;
+}
+int redir_to_child (cmdline_t *ptr)
+{
+ return 1;
+}
+int redir_to_debugger (cmdline_t *ptr)
+{
+ return 1;
+}
+int redir_debug_init (cmdline_t *ptr) { return 0; }
#endif /* __DJGPP_MINOR < 3 */
extern void _initialize_go32_nat (void);
-struct env387
- {
- unsigned short control;
- unsigned short r0;
- unsigned short status;
- unsigned short r1;
- unsigned short tag;
- unsigned short r2;
- unsigned long eip;
- unsigned short code_seg;
- unsigned short opcode;
- unsigned long operand;
- unsigned short operand_seg;
- unsigned short r3;
- unsigned char regs[8][10];
- };
+typedef enum { wp_insert, wp_remove, wp_count } wp_op;
+
+/* This holds the current reference counts for each debug register. */
+static int dr_ref_count[4];
extern char **environ;
#define SOME_PID 42
static int prog_has_started = 0;
-static void print_387_status (unsigned short status, struct env387 *ep);
static void go32_open (char *name, int from_tty);
static void go32_close (int quitting);
static void go32_attach (char *args, int from_tty);
static void go32_store_registers (int regno);
static void go32_prepare_to_store (void);
static int go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
- int write, struct target_ops *target);
+ int write,
+ struct mem_attrib *attrib,
+ struct target_ops *target);
static void go32_files_info (struct target_ops *target);
static void go32_stop (void);
static void go32_kill_inferior (void);
static void go32_create_inferior (char *exec_file, char *args, char **env);
+static void cleanup_dregs (void);
static void go32_mourn_inferior (void);
static int go32_can_run (void);
-static void ignore (void);
-static void ignore2 (char *a, int b);
-static int go32_insert_aligned_watchpoint (int pid, CORE_ADDR waddr,
- CORE_ADDR addr, int len, int rw);
-static int go32_insert_nonaligned_watchpoint (int pid, CORE_ADDR waddr,
- CORE_ADDR addr, int len, int rw);
+static int go32_insert_aligned_watchpoint (CORE_ADDR waddr, CORE_ADDR addr,
+ int len, int rw);
+static int go32_remove_aligned_watchpoint (CORE_ADDR waddr, CORE_ADDR addr,
+ int len, int rw);
+static int go32_handle_nonaligned_watchpoint (wp_op what, CORE_ADDR waddr,
+ CORE_ADDR addr, int len, int rw);
static struct target_ops go32_ops;
static void go32_terminal_init (void);
static void go32_terminal_inferior (void);
static void go32_terminal_ours (void);
-static void
-print_387_status (unsigned short status, struct env387 *ep)
-{
- int i;
- int bothstatus;
- int top;
- int fpreg;
-
- bothstatus = ((status != 0) && (ep->status != 0));
- if (status != 0)
- {
- if (bothstatus)
- printf_unfiltered ("u: ");
- print_387_status_word (status);
- }
-
- if (ep->status != 0)
- {
- if (bothstatus)
- printf_unfiltered ("e: ");
- print_387_status_word (ep->status);
- }
-
- print_387_control_word (ep->control & 0xffff);
- printf_unfiltered ("last exception: ");
- printf_unfiltered ("opcode %s; ", local_hex_string (ep->opcode));
- printf_unfiltered ("pc %s:", local_hex_string (ep->code_seg));
- printf_unfiltered ("%s; ", local_hex_string (ep->eip));
- printf_unfiltered ("operand %s", local_hex_string (ep->operand_seg));
- printf_unfiltered (":%s\n", local_hex_string (ep->operand));
-
- top = (ep->status >> 11) & 7;
-
- printf_unfiltered ("regno tag msb lsb value\n");
- for (fpreg = 0; fpreg < 8; fpreg++)
- {
- long double val;
-
- printf_unfiltered ("%s %d: ", fpreg == top ? "=>" : " ", fpreg);
-
- switch ((ep->tag >> (fpreg * 2)) & 3)
- {
- case 0:
- printf_unfiltered ("valid ");
- break;
- case 1:
- printf_unfiltered ("zero ");
- break;
- case 2:
- printf_unfiltered ("trap ");
- break;
- case 3:
- printf_unfiltered ("empty ");
- break;
- }
- for (i = 0; i < 8; i++)
- printf_unfiltered ("%02x", ep->regs[fpreg][i]);
-
- REGISTER_CONVERT_TO_VIRTUAL (FP0_REGNUM + fpreg, builtin_type_long_double,
- &ep->regs[fpreg], &val);
-
- printf_unfiltered (" %LG\n", val);
- }
-}
-
-void
-i386_go32_float_info (void)
-{
- print_387_status (0, (struct env387 *) &npx);
-}
-
-#define r_ofs(x) ((int)(&(((TSS *)0)->x)))
+#define r_ofs(x) (offsetof(TSS,x))
static struct
{
- int tss_ofs;
- int size;
+ size_t tss_ofs;
+ size_t size;
}
regno_mapping[] =
{
- r_ofs (tss_eax), 4,
- r_ofs (tss_ecx), 4,
- r_ofs (tss_edx), 4,
- r_ofs (tss_ebx), 4,
- r_ofs (tss_esp), 4,
- r_ofs (tss_ebp), 4,
- r_ofs (tss_esi), 4,
- r_ofs (tss_edi), 4,
- r_ofs (tss_eip), 4,
- r_ofs (tss_eflags), 4,
- r_ofs (tss_cs), 2,
- r_ofs (tss_ss), 2,
- r_ofs (tss_ds), 2,
- r_ofs (tss_es), 2,
- r_ofs (tss_fs), 2,
- r_ofs (tss_gs), 2,
- 0, 10,
- 1, 10,
- 2, 10,
- 3, 10,
- 4, 10,
- 5, 10,
- 6, 10,
- 7, 10,
- 0, 2,
- 4, 2,
- 8, 2,
- 12, 4,
- 16, 2,
- 20, 4,
- 24, 2
+ {r_ofs (tss_eax), 4}, /* normal registers, from a_tss */
+ {r_ofs (tss_ecx), 4},
+ {r_ofs (tss_edx), 4},
+ {r_ofs (tss_ebx), 4},
+ {r_ofs (tss_esp), 4},
+ {r_ofs (tss_ebp), 4},
+ {r_ofs (tss_esi), 4},
+ {r_ofs (tss_edi), 4},
+ {r_ofs (tss_eip), 4},
+ {r_ofs (tss_eflags), 4},
+ {r_ofs (tss_cs), 2},
+ {r_ofs (tss_ss), 2},
+ {r_ofs (tss_ds), 2},
+ {r_ofs (tss_es), 2},
+ {r_ofs (tss_fs), 2},
+ {r_ofs (tss_gs), 2},
+ {0, 10}, /* 8 FP registers, from npx.reg[] */
+ {1, 10},
+ {2, 10},
+ {3, 10},
+ {4, 10},
+ {5, 10},
+ {6, 10},
+ {7, 10},
+ /* The order of the next 7 registers must be consistent
+ with their numbering in config/i386/tm-i386.h, which see. */
+ {0, 2}, /* control word, from npx */
+ {4, 2}, /* status word, from npx */
+ {8, 2}, /* tag word, from npx */
+ {16, 2}, /* last FP exception CS from npx */
+ {12, 4}, /* last FP exception EIP from npx */
+ {24, 2}, /* last FP exception operand selector from npx */
+ {20, 4}, /* last FP exception operand offset from npx */
+ {18, 2} /* last FP opcode from npx */
};
static struct
{
int go32_sig;
- int gdb_sig;
+ enum target_signal gdb_sig;
}
sig_map[] =
{
- 0, TARGET_SIGNAL_FPE,
- 1, TARGET_SIGNAL_TRAP,
- 2, TARGET_SIGNAL_UNKNOWN,
- 3, TARGET_SIGNAL_TRAP,
- 4, TARGET_SIGNAL_FPE,
- 5, TARGET_SIGNAL_SEGV,
- 6, TARGET_SIGNAL_ILL,
- 7, TARGET_SIGNAL_FPE,
- 8, TARGET_SIGNAL_SEGV,
- 9, TARGET_SIGNAL_SEGV,
- 10, TARGET_SIGNAL_BUS,
- 11, TARGET_SIGNAL_SEGV,
- 12, TARGET_SIGNAL_SEGV,
- 13, TARGET_SIGNAL_ABRT,
- 14, TARGET_SIGNAL_SEGV,
- 16, TARGET_SIGNAL_FPE,
- 31, TARGET_SIGNAL_ILL,
- 0x75, TARGET_SIGNAL_FPE,
- 0x79, TARGET_SIGNAL_INT,
- 0x1b, TARGET_SIGNAL_INT,
- -1, -1
+ {0, TARGET_SIGNAL_FPE},
+ {1, TARGET_SIGNAL_TRAP},
+ /* Exception 2 is triggered by the NMI. DJGPP handles it as SIGILL,
+ but I think SIGBUS is better, since the NMI is usually activated
+ as a result of a memory parity check failure. */
+ {2, TARGET_SIGNAL_BUS},
+ {3, TARGET_SIGNAL_TRAP},
+ {4, TARGET_SIGNAL_FPE},
+ {5, TARGET_SIGNAL_SEGV},
+ {6, TARGET_SIGNAL_ILL},
+ {7, TARGET_SIGNAL_EMT}, /* no-coprocessor exception */
+ {8, TARGET_SIGNAL_SEGV},
+ {9, TARGET_SIGNAL_SEGV},
+ {10, TARGET_SIGNAL_BUS},
+ {11, TARGET_SIGNAL_SEGV},
+ {12, TARGET_SIGNAL_SEGV},
+ {13, TARGET_SIGNAL_SEGV},
+ {14, TARGET_SIGNAL_SEGV},
+ {16, TARGET_SIGNAL_FPE},
+ {17, TARGET_SIGNAL_BUS},
+ {31, TARGET_SIGNAL_ILL},
+ {0x1b, TARGET_SIGNAL_INT},
+ {0x75, TARGET_SIGNAL_FPE},
+ {0x78, TARGET_SIGNAL_ALRM},
+ {0x79, TARGET_SIGNAL_INT},
+ {0x7a, TARGET_SIGNAL_QUIT},
+ {-1, TARGET_SIGNAL_LAST}
+};
+
+static struct {
+ enum target_signal gdb_sig;
+ int djgpp_excepno;
+} excepn_map[] = {
+ {TARGET_SIGNAL_0, -1},
+ {TARGET_SIGNAL_ILL, 6}, /* Invalid Opcode */
+ {TARGET_SIGNAL_EMT, 7}, /* triggers SIGNOFP */
+ {TARGET_SIGNAL_SEGV, 13}, /* GPF */
+ {TARGET_SIGNAL_BUS, 17}, /* Alignment Check */
+ /* The rest are fake exceptions, see dpmiexcp.c in djlsr*.zip for
+ details. */
+ {TARGET_SIGNAL_TERM, 0x1b}, /* triggers Ctrl-Break type of SIGINT */
+ {TARGET_SIGNAL_FPE, 0x75},
+ {TARGET_SIGNAL_INT, 0x79},
+ {TARGET_SIGNAL_QUIT, 0x7a},
+ {TARGET_SIGNAL_ALRM, 0x78}, /* triggers SIGTIMR */
+ {TARGET_SIGNAL_PROF, 0x78},
+ {TARGET_SIGNAL_LAST, -1}
};
static void
-go32_open (char *name, int from_tty)
+go32_open (char *name ATTRIBUTE_UNUSED, int from_tty ATTRIBUTE_UNUSED)
{
- printf_unfiltered ("Use the `run' command to run go32 programs\n");
+ printf_unfiltered ("Done. Use the \"run\" command to run the program.\n");
}
static void
-go32_close (int quitting)
+go32_close (int quitting ATTRIBUTE_UNUSED)
{
}
static void
-go32_attach (char *args, int from_tty)
+go32_attach (char *args ATTRIBUTE_UNUSED, int from_tty ATTRIBUTE_UNUSED)
{
- printf_unfiltered ("Use the `run' command to run go32 programs\n");
+ error ("\
+You cannot attach to a running program on this platform.\n\
+Use the `run' command to run DJGPP programs.");
}
static void
-go32_detach (char *args, int from_tty)
+go32_detach (char *args ATTRIBUTE_UNUSED, int from_tty ATTRIBUTE_UNUSED)
{
}
static int resume_is_step;
+static int resume_signal = -1;
static void
-go32_resume (int pid, int step, enum target_signal siggnal)
+go32_resume (int pid ATTRIBUTE_UNUSED, int step, enum target_signal siggnal)
{
+ int i;
+
resume_is_step = step;
+
+ if (siggnal != TARGET_SIGNAL_0 && siggnal != TARGET_SIGNAL_TRAP)
+ {
+ for (i = 0, resume_signal = -1;
+ excepn_map[i].gdb_sig != TARGET_SIGNAL_LAST; i++)
+ if (excepn_map[i].gdb_sig == siggnal)
+ {
+ resume_signal = excepn_map[i].djgpp_excepno;
+ break;
+ }
+ if (resume_signal == -1)
+ printf_unfiltered ("Cannot deliver signal %s on this platform.\n",
+ target_signal_to_name (siggnal));
+ }
}
+static char child_cwd[FILENAME_MAX];
+
static int
-go32_wait (int pid, struct target_waitstatus *status)
+go32_wait (int pid ATTRIBUTE_UNUSED, struct target_waitstatus *status)
{
int i;
+ unsigned char saved_opcode;
+ unsigned long INT3_addr = 0;
+ int stepping_over_INT = 0;
+ a_tss.tss_eflags &= 0xfeff; /* reset the single-step flag (TF) */
if (resume_is_step)
- a_tss.tss_eflags |= 0x0100;
+ {
+ /* If the next instruction is INT xx or INTO, we need to handle
+ them specially. Intel manuals say that these instructions
+ reset the single-step flag (a.k.a. TF). However, it seems
+ that, at least in the DPMI environment, and at least when
+ stepping over the DPMI interrupt 31h, the problem is having
+ TF set at all when INT 31h is executed: the debuggee either
+ crashes (and takes the system with it) or is killed by a
+ SIGTRAP.
+
+ So we need to emulate single-step mode: we put an INT3 opcode
+ right after the INT xx instruction, let the debuggee run
+ until it hits INT3 and stops, then restore the original
+ instruction which we overwrote with the INT3 opcode, and back
+ up the debuggee's EIP to that instruction. */
+ read_child (a_tss.tss_eip, &saved_opcode, 1);
+ if (saved_opcode == 0xCD || saved_opcode == 0xCE)
+ {
+ unsigned char INT3_opcode = 0xCC;
+
+ INT3_addr
+ = saved_opcode == 0xCD ? a_tss.tss_eip + 2 : a_tss.tss_eip + 1;
+ stepping_over_INT = 1;
+ read_child (INT3_addr, &saved_opcode, 1);
+ write_child (INT3_addr, &INT3_opcode, 1);
+ }
+ else
+ a_tss.tss_eflags |= 0x0100; /* normal instruction: set TF */
+ }
+
+ /* The special value FFFFh in tss_trap indicates to run_child that
+ tss_irqn holds a signal to be delivered to the debuggee. */
+ if (resume_signal <= -1)
+ {
+ a_tss.tss_trap = 0;
+ a_tss.tss_irqn = 0xff;
+ }
else
- a_tss.tss_eflags &= 0xfeff;
+ {
+ a_tss.tss_trap = 0xffff; /* run_child looks for this */
+ a_tss.tss_irqn = resume_signal;
+ }
+
+ /* The child might change working directory behind our back. The
+ GDB users won't like the side effects of that when they work with
+ relative file names, and GDB might be confused by its current
+ directory not being in sync with the truth. So we always make a
+ point of changing back to where GDB thinks is its cwd, when we
+ return control to the debugger, but restore child's cwd before we
+ run it. */
+ /* Initialize child_cwd, before the first call to run_child and not
+ in the initialization, so the child get also the changed directory
+ set with the gdb-command "cd ..." */
+ if (!*child_cwd)
+ /* Initialize child's cwd with the current one. */
+ getcwd (child_cwd, sizeof (child_cwd));
+
+ chdir (child_cwd);
#if __DJGPP_MINOR__ < 3
- save_npx ();
+ load_npx ();
#endif
run_child ();
#if __DJGPP_MINOR__ < 3
- load_npx ();
+ save_npx ();
#endif
+ /* Did we step over an INT xx instruction? */
+ if (stepping_over_INT && a_tss.tss_eip == INT3_addr + 1)
+ {
+ /* Restore the original opcode. */
+ a_tss.tss_eip--; /* EIP points *after* the INT3 instruction */
+ write_child (a_tss.tss_eip, &saved_opcode, 1);
+ /* Simulate a TRAP exception. */
+ a_tss.tss_irqn = 1;
+ a_tss.tss_eflags |= 0x0100;
+ }
+
+ getcwd (child_cwd, sizeof (child_cwd)); /* in case it has changed */
+ chdir (current_directory);
+
if (a_tss.tss_irqn == 0x21)
{
status->kind = TARGET_WAITKIND_EXITED;
{
if (a_tss.tss_irqn == sig_map[i].go32_sig)
{
+#if __DJGPP_MINOR__ < 3
if ((status->value.sig = sig_map[i].gdb_sig) !=
TARGET_SIGNAL_TRAP)
status->kind = TARGET_WAITKIND_SIGNALLED;
+#else
+ status->value.sig = sig_map[i].gdb_sig;
+#endif
break;
}
}
}
static void
-go32_fetch_registers (int regno)
+fetch_register (int regno)
{
- /*JHW */
- int end_reg = regno + 1; /* just one reg initially */
-
- if (regno < 0) /* do the all registers */
- {
- regno = 0; /* start at first register */
- /* # regs in table */
- end_reg = sizeof (regno_mapping) / sizeof (regno_mapping[0]);
- }
+ if (regno < FP0_REGNUM)
+ supply_register (regno, (char *) &a_tss + regno_mapping[regno].tss_ofs);
+ else if (regno <= LAST_FPU_CTRL_REGNUM)
+ i387_supply_register (regno, (char *) &npx);
+ else
+ internal_error (__FILE__, __LINE__,
+ "Invalid register no. %d in fetch_register.", regno);
+}
- for (; regno < end_reg; regno++)
+static void
+go32_fetch_registers (int regno)
+{
+ if (regno >= 0)
+ fetch_register (regno);
+ else
{
- if (regno < 16)
- supply_register (regno,
- (char *) &a_tss + regno_mapping[regno].tss_ofs);
- else if (regno < 24)
- supply_register (regno,
- (char *) &npx.reg[regno_mapping[regno].tss_ofs]);
- else if (regno < 31)
- supply_register (regno,
- (char *) &npx.reg + regno_mapping[regno].tss_ofs);
- else
- {
- printf_unfiltered ("Invalid register in go32_fetch_register(%d)",
- regno);
- exit (1);
- }
+ for (regno = 0; regno < FP0_REGNUM; regno++)
+ fetch_register (regno);
+ i387_supply_fsave ((char *) &npx);
}
}
void *rp;
void *v = (void *) ®isters[REGISTER_BYTE (regno)];
- if (regno < 16)
- rp = (char *) &a_tss + regno_mapping[regno].tss_ofs;
- else if (regno < 24)
- rp = (char *) &npx.reg[regno_mapping[regno].tss_ofs];
- else if (regno > 31)
- rp = (char *) &npx + regno_mapping[regno].tss_ofs;
+ if (regno < FP0_REGNUM)
+ memcpy ((char *) &a_tss + regno_mapping[regno].tss_ofs,
+ v, regno_mapping[regno].size);
+ else if (regno <= LAST_FPU_CTRL_REGNUM)
+ i387_fill_fsave ((char *)&npx, regno);
else
- {
- printf_unfiltered ("Invalid register in store_register(%d)", regno);
- exit (1);
- }
- memcpy (rp, v, regno_mapping[regno].size);
+ internal_error (__FILE__, __LINE__,
+ "Invalid register no. %d in store_register.", regno);
}
static void
go32_store_registers (int regno)
{
- int r;
+ unsigned r;
if (regno >= 0)
store_register (regno);
else
{
- for (r = 0; r < sizeof (regno_mapping) / sizeof (regno_mapping[0]); r++)
+ for (r = 0; r < FP0_REGNUM; r++)
store_register (r);
+ i387_fill_fsave ((char *) &npx, -1);
}
}
static int
go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
- struct target_ops *target)
+ struct mem_attrib *attrib ATTRIBUTE_UNUSED,
+ struct target_ops *target ATTRIBUTE_UNUSED)
{
if (write)
{
}
}
+static cmdline_t child_cmd; /* parsed child's command line kept here */
+
static void
-go32_files_info (struct target_ops *target)
+go32_files_info (struct target_ops *target ATTRIBUTE_UNUSED)
{
- printf_unfiltered ("You are running a DJGPP V2 program\n");
+ printf_unfiltered ("You are running a DJGPP V2 program.\n");
}
static void
static void
go32_kill_inferior (void)
{
+ redir_cmdline_delete (&child_cmd);
+ resume_signal = -1;
+ resume_is_step = 0;
unpush_target (&go32_ops);
}
char *cmdline;
char **env_save = environ;
+ /* If no exec file handed to us, get it from the exec-file command -- with
+ a good, common error message if none is specified. */
+ if (exec_file == 0)
+ exec_file = get_exec_file (1);
+
if (prog_has_started)
{
go32_stop ();
go32_kill_inferior ();
}
+ resume_signal = -1;
+ resume_is_step = 0;
+
+ /* Initialize child's cwd as empty to be initialized when starting
+ the child. */
+ *child_cwd = 0;
+
+ /* Init command line storage. */
+ if (redir_debug_init (&child_cmd) == -1)
+ internal_error (__FILE__, __LINE__,
+ "Cannot allocate redirection storage: not enough memory.\n");
+
+ /* Parse the command line and create redirections. */
+ if (strpbrk (args, "<>"))
+ {
+ if (redir_cmdline_parse (args, &child_cmd) == 0)
+ args = child_cmd.command;
+ else
+ error ("Syntax error in command line.");
+ }
+ else
+ child_cmd.command = xstrdup (args);
cmdline = (char *) alloca (strlen (args) + 4);
cmdline[0] = strlen (args);
environ = env_save;
edi_init (start_state);
+#if __DJGPP_MINOR__ < 3
+ save_npx ();
+#endif
inferior_pid = SOME_PID;
push_target (&go32_ops);
clear_proceed_status ();
insert_breakpoints ();
- proceed ((CORE_ADDR) - 1, TARGET_SIGNAL_0, 0);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
prog_has_started = 1;
}
static void
go32_mourn_inferior (void)
{
+ /* We need to make sure all the breakpoint enable bits in the DR7
+ register are reset when the inferior exits. Otherwise, if they
+ rerun the inferior, the uncleared bits may cause random SIGTRAPs,
+ failure to set more watchpoints, and other calamities. It would
+ be nice if GDB itself would take care to remove all breakpoints
+ at all times, but it doesn't, probably under an assumption that
+ the OS cleans up when the debuggee exits. */
+ cleanup_dregs ();
go32_kill_inferior ();
generic_mourn_inferior ();
}
return 1;
}
-static void
-ignore (void)
-{
-}
-
-static void
-ignore2 (char *a, int b)
-{
-}
-
/* Hardware watchpoint support. */
#define DR_STATUS 6
#define DR_GLOBAL_SLOWDOWN 0x200
#define DR_CONTROL_SHIFT 16
#define DR_CONTROL_SIZE 4
-#define DR_RW_READ 0x3
+#define DR_RW_READWRITE 0x3
#define DR_RW_WRITE 0x1
#define DR_CONTROL_MASK 0xf
#define DR_ENABLE_MASK 0x3
#define STATUS D_REGS[DR_STATUS]
#define IS_REG_FREE(index) \
- (!(CONTROL & (3 << (DR_ENABLE_SIZE * index))))
+ (!(CONTROL & (3 << (DR_ENABLE_SIZE * (index)))))
#define LOCAL_ENABLE_REG(index) \
- (CONTROL |= (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * index)))
+ (CONTROL |= (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (index))))
#define GLOBAL_ENABLE_REG(index) \
- (CONTROL |= (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * index)))
+ (CONTROL |= (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (index))))
#define DISABLE_REG(index) \
- (CONTROL &= ~(3 << (DR_ENABLE_SIZE * index)))
+ (CONTROL &= ~(3 << (DR_ENABLE_SIZE * (index))))
#define SET_LOCAL_EXACT() \
(CONTROL |= DR_LOCAL_SLOWDOWN)
#define SET_GLOBAL_EXACT() \
(CONTROL |= DR_GLOBAL_SLOWDOWN)
+#define RESET_LOCAL_EXACT() \
+ (CONTROL &= ~(DR_LOCAL_SLOWDOWN))
+
+#define RESET_GLOBAL_EXACT() \
+ (CONTROL &= ~(DR_GLOBAL_SLOWDOWN))
+
#define SET_BREAK(index,address) \
do {\
- CONTROL &= ~(DR_CONTROL_MASK << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * index));\
+ CONTROL &= ~(DR_CONTROL_MASK << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (index)));\
D_REGS[index] = address;\
+ dr_ref_count[index]++;\
} while(0)
#define SET_WATCH(index,address,rw,len) \
do {\
SET_BREAK(index,address);\
- CONTROL |= (len | rw) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * index);\
+ CONTROL |= ((len)|(rw)) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (index));\
} while (0)
-#define WATCH_HIT(index) \
- (\
- (STATUS & (1 << index)) && \
- (CONTROL & (DR_CONTROL_MASK << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * index)))\
- )
+#define IS_WATCH(index) \
+ (CONTROL & (DR_CONTROL_MASK << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE*(index))))
+
+#define WATCH_HIT(index) ((STATUS & (1 << (index))) && IS_WATCH(index))
+
+#define DR_DEF(index) \
+ ((CONTROL >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (index))) & 0x0f)
+
-#if 0 /* use debugging macro */
-#define SHOW_DR(text) \
+#if 0 /* use debugging macro */
+#define SHOW_DR(text,len) \
do { \
+ if (!getenv ("GDB_SHOW_DR")) break; \
fprintf(stderr,"%08x %08x ",edi.dr[7],edi.dr[6]); \
- fprintf(stderr,"%08x %08x ",edi.dr[0],edi.dr[1]); \
- fprintf(stderr,"%08x %08x ",edi.dr[2],edi.dr[3]); \
- fprintf(stderr,"(%s)\n",#text); \
+ fprintf(stderr,"%08x %d %08x %d ", \
+ edi.dr[0],dr_ref_count[0],edi.dr[1],dr_ref_count[1]); \
+ fprintf(stderr,"%08x %d %08x %d ", \
+ edi.dr[2],dr_ref_count[2],edi.dr[3],dr_ref_count[3]); \
+ fprintf(stderr,(len)?"(%s:%d)\n":"(%s)\n",#text,len); \
} while (0)
#else
-#define SHOW_DR(text) do {} while (0)
+#define SHOW_DR(text,len) do {} while (0)
#endif
+static void
+cleanup_dregs (void)
+{
+ int i;
+
+ CONTROL = 0;
+ STATUS = 0;
+ for (i = 0; i < 4; i++)
+ {
+ D_REGS[i] = 0;
+ dr_ref_count[i] = 0;
+ }
+}
+
/* Insert a watchpoint. */
int
-go32_insert_watchpoint (int pid, CORE_ADDR addr, int len, int rw)
+go32_insert_watchpoint (int pid ATTRIBUTE_UNUSED, CORE_ADDR addr,
+ int len, int rw)
{
- int ret = go32_insert_aligned_watchpoint (pid, addr, addr, len, rw);
+ int ret = go32_insert_aligned_watchpoint (addr, addr, len, rw);
- SHOW_DR (insert_watch);
+ SHOW_DR (insert_watch, len);
return ret;
}
static int
-go32_insert_aligned_watchpoint (int pid, CORE_ADDR waddr, CORE_ADDR addr,
+go32_insert_aligned_watchpoint (CORE_ADDR waddr, CORE_ADDR addr,
int len, int rw)
{
int i;
int read_write_bits, len_bits;
- /* Look for a free debug register. */
- for (i = 0; i <= 3; i++)
+ /* Values of rw: 0 - write, 1 - read, 2 - access (read and write).
+ However, x86 doesn't support read-only data breakpoints. */
+ read_write_bits = rw ? DR_RW_READWRITE : DR_RW_WRITE;
+
+ switch (len)
+ {
+ case 4:
+ len_bits = DR_LEN_4;
+ break;
+ case 2:
+ len_bits = DR_LEN_2;
+ break;
+ case 1:
+ len_bits = DR_LEN_1;
+ break;
+ default:
+ /* The debug registers only have 2 bits for the length, so
+ so this value will always fail the loop below. */
+ len_bits = 0x10;
+ }
+
+ /* Look for an occupied debug register with the same address and the
+ same RW and LEN definitions. If we find one, we can use it for
+ this watchpoint as well (and save a register). */
+ for (i = 0; i < 4; i++)
+ {
+ if (!IS_REG_FREE (i) && D_REGS[i] == addr
+ && DR_DEF (i) == (unsigned)(len_bits | read_write_bits))
{
- if (IS_REG_FREE (i))
- break;
+ dr_ref_count[i]++;
+ return 0;
}
+ }
+
+ /* Look for a free debug register. */
+ for (i = 0; i <= 3; i++)
+ {
+ if (IS_REG_FREE (i))
+ break;
+ }
/* No more debug registers! */
if (i > 3)
return -1;
- read_write_bits = ((rw & 1) ? DR_RW_READ : 0) | ((rw & 2) ? DR_RW_WRITE : 0);
-
- if (len == 1)
- len_bits = DR_LEN_1;
- else if (len == 2)
- {
- if (addr % 2)
- return go32_insert_nonaligned_watchpoint (pid, waddr, addr, len, rw);
- len_bits = DR_LEN_2;
- }
+ if (len == 2)
+ {
+ if (addr % 2)
+ return go32_handle_nonaligned_watchpoint (wp_insert, waddr, addr,
+ len, rw);
+ }
else if (len == 4)
- {
- if (addr % 4)
- return go32_insert_nonaligned_watchpoint (pid, waddr, addr, len, rw);
- len_bits = DR_LEN_4;
- }
- else
- return go32_insert_nonaligned_watchpoint (pid, waddr, addr, len, rw);
+ {
+ if (addr % 4)
+ return go32_handle_nonaligned_watchpoint (wp_insert, waddr, addr,
+ len, rw);
+ }
+ else if (len != 1)
+ return go32_handle_nonaligned_watchpoint (wp_insert, waddr, addr, len, rw);
SET_WATCH (i, addr, read_write_bits, len_bits);
LOCAL_ENABLE_REG (i);
SET_LOCAL_EXACT ();
+ SET_GLOBAL_EXACT ();
+ return 0;
}
static int
-go32_insert_nonaligned_watchpoint (int pid, CORE_ADDR waddr, CORE_ADDR addr,
+go32_handle_nonaligned_watchpoint (wp_op what, CORE_ADDR waddr, CORE_ADDR addr,
int len, int rw)
{
int align;
int size;
- int rv = 0;
+ int rv = 0, status = 0;
- static int size_try_array[16] =
+ static int size_try_array[4][4] =
{
- 1, 1, 1, 1, /* trying size one */
- 2, 1, 2, 1, /* trying size two */
- 2, 1, 2, 1, /* trying size three */
- 4, 1, 2, 1 /* trying size four */
+ { 1, 1, 1, 1 }, /* trying size one */
+ { 2, 1, 2, 1 }, /* trying size two */
+ { 2, 1, 2, 1 }, /* trying size three */
+ { 4, 1, 2, 1 } /* trying size four */
};
while (len > 0)
{
align = addr % 4;
- /* Four is the maximum length for 386. */
- size = (len > 4) ? 3 : len - 1;
- size = size_try_array[size * 4 + align];
- rv = go32_insert_aligned_watchpoint (pid, waddr, addr, size, rw);
- if (rv)
- {
- go32_remove_watchpoint (pid, waddr, size);
- return rv;
- }
+ /* Four is the maximum length a 386 debug register can watch. */
+ size = size_try_array[len > 4 ? 3 : len - 1][align];
+ if (what == wp_insert)
+ status = go32_insert_aligned_watchpoint (waddr, addr, size, rw);
+ else if (what == wp_remove)
+ status = go32_remove_aligned_watchpoint (waddr, addr, size, rw);
+ else if (what == wp_count)
+ rv++;
+ else
+ status = EINVAL;
+ /* We keep the loop going even after a failure, because some of
+ the other aligned watchpoints might still succeed, e.g. if
+ they watch addresses that are already watched, and thus just
+ increment the reference counts of occupied debug registers.
+ If we break out of the loop too early, we could cause those
+ addresses watched by other watchpoints to be disabled when
+ GDB reacts to our failure to insert this watchpoint and tries
+ to remove it. */
+ if (status)
+ rv = status;
addr += size;
len -= size;
}
/* Remove a watchpoint. */
int
-go32_remove_watchpoint (int pid, CORE_ADDR addr, int len)
+go32_remove_watchpoint (int pid ATTRIBUTE_UNUSED, CORE_ADDR addr,
+ int len, int rw)
+{
+ int ret = go32_remove_aligned_watchpoint (addr, addr, len, rw);
+
+ SHOW_DR (remove_watch, len);
+ return ret;
+}
+
+static int
+go32_remove_aligned_watchpoint (CORE_ADDR waddr, CORE_ADDR addr,
+ int len, int rw)
{
int i;
+ int read_write_bits, len_bits;
+
+ /* Values of rw: 0 - write, 1 - read, 2 - access (read and write).
+ However, x86 doesn't support read-only data breakpoints. */
+ read_write_bits = rw ? DR_RW_READWRITE : DR_RW_WRITE;
+
+ switch (len)
+ {
+ case 4:
+ len_bits = DR_LEN_4;
+ break;
+ case 2:
+ len_bits = DR_LEN_2;
+ break;
+ case 1:
+ len_bits = DR_LEN_1;
+ break;
+ default:
+ /* The debug registers only have 2 bits for the length, so
+ so this value will always fail the loop below. */
+ len_bits = 0x10;
+ }
+
+ if (len == 2)
+ {
+ if (addr % 2)
+ return go32_handle_nonaligned_watchpoint (wp_remove, waddr, addr,
+ len, rw);
+ }
+ else if (len == 4)
+ {
+ if (addr % 4)
+ return go32_handle_nonaligned_watchpoint (wp_remove, waddr, addr,
+ len, rw);
+ }
+ else if (len != 1)
+ return go32_handle_nonaligned_watchpoint (wp_remove, waddr, addr, len, rw);
for (i = 0; i <= 3; i++)
{
- if (D_REGS[i] == addr)
+ if (!IS_REG_FREE (i) && D_REGS[i] == addr
+ && DR_DEF (i) == (unsigned)(len_bits | read_write_bits))
{
- DISABLE_REG (i);
+ dr_ref_count[i]--;
+ if (dr_ref_count[i] == 0)
+ DISABLE_REG (i);
}
}
- SHOW_DR (remove_watch);
+ RESET_LOCAL_EXACT ();
+ RESET_GLOBAL_EXACT ();
return 0;
}
-/* Check if stopped by a watchpoint. */
+/* Can we use debug registers to watch a region whose address is ADDR
+ and whose length is LEN bytes? */
+
+int
+go32_region_ok_for_watchpoint (CORE_ADDR addr, int len)
+{
+ /* Compute how many aligned watchpoints we would need to cover this
+ region. */
+ int nregs = go32_handle_nonaligned_watchpoint (wp_count, addr, addr, len, 0);
+
+ return nregs <= 4 ? 1 : 0;
+}
+
+/* Check if stopped by a data watchpoint. If so, return the address
+ whose access triggered the watchpoint. */
CORE_ADDR
-go32_stopped_by_watchpoint (int pid)
+go32_stopped_by_watchpoint (int pid ATTRIBUTE_UNUSED, int data_watchpoint)
{
int i, ret = 0;
int status;
status = edi.dr[DR_STATUS];
- SHOW_DR (stopped_by);
+ SHOW_DR (stopped_by, 0);
for (i = 0; i <= 3; i++)
{
- if (WATCH_HIT (i))
+ if (WATCH_HIT (i) && data_watchpoint)
{
- SHOW_DR (HIT);
+ SHOW_DR (WP_HIT, 0);
ret = D_REGS[i];
}
}
- /* this is a hack to GDB. If we stopped at a hardware breakpoint,
- the stop_pc must incremented by DECR_PC_AFTER_BREAK. I tried everything
- with the DECR_PC_AFTER_HW_BREAK, but nothing works. */
- /* This is probably fixed by jtc's recent patch -sts 2/19/99 */
- if (STATUS && !ret)
- stop_pc += DECR_PC_AFTER_BREAK;
- STATUS = 0;
return ret;
}
/* Remove a breakpoint. */
int
-go32_remove_hw_breakpoint (CORE_ADDR addr, CORE_ADDR shadow)
+go32_remove_hw_breakpoint (CORE_ADDR addr, void *shadow ATTRIBUTE_UNUSED)
{
int i;
for (i = 0; i <= 3; i++)
{
- if (D_REGS[i] == addr)
+ if (!IS_REG_FREE (i) && D_REGS[i] == addr && DR_DEF (i) == 0)
{
- DISABLE_REG (i);
+ dr_ref_count[i]--;
+ if (dr_ref_count[i] == 0)
+ DISABLE_REG (i);
}
}
- SHOW_DR (remove_hw);
+ SHOW_DR (remove_hw, 0);
return 0;
}
int
-go32_insert_hw_breakpoint (CORE_ADDR addr, CORE_ADDR shadow)
+go32_insert_hw_breakpoint (CORE_ADDR addr, void *shadow ATTRIBUTE_UNUSED)
{
int i;
- int read_write_bits, len_bits;
- int free_debug_register;
- int register_number;
+
+ /* Look for an occupied debug register with the same address and the
+ same RW and LEN definitions. If we find one, we can use it for
+ this breakpoint as well (and save a register). */
+ for (i = 0; i < 4; i++)
+ {
+ if (!IS_REG_FREE (i) && D_REGS[i] == addr && DR_DEF (i) == 0)
+ {
+ dr_ref_count[i]++;
+ SHOW_DR (insert_hw, 0);
+ return 0;
+ }
+ }
/* Look for a free debug register. */
for (i = 0; i <= 3; i++)
break;
}
- /* No more debug registers! */
- if (i > 3)
+ /* No more debug registers? */
+ if (i < 4)
+ {
+ SET_BREAK (i, addr);
+ LOCAL_ENABLE_REG (i);
+ }
+ SHOW_DR (insert_hw, 0);
+
+ return i < 4 ? 0 : EBUSY;
+}
+
+/* Put the device open on handle FD into either raw or cooked
+ mode, return 1 if it was in raw mode, zero otherwise. */
+
+static int
+device_mode (int fd, int raw_p)
+{
+ int oldmode, newmode;
+ __dpmi_regs regs;
+
+ regs.x.ax = 0x4400;
+ regs.x.bx = fd;
+ __dpmi_int (0x21, ®s);
+ if (regs.x.flags & 1)
return -1;
+ newmode = oldmode = regs.x.dx;
- SET_BREAK (i, addr);
- LOCAL_ENABLE_REG (i);
- SHOW_DR (insert_hw);
+ if (raw_p)
+ newmode |= 0x20;
+ else
+ newmode &= ~0x20;
- return 0;
+ if (oldmode & 0x80) /* Only for character dev */
+ {
+ regs.x.ax = 0x4401;
+ regs.x.bx = fd;
+ regs.x.dx = newmode & 0xff; /* Force upper byte zero, else it fails */
+ __dpmi_int (0x21, ®s);
+ if (regs.x.flags & 1)
+ return -1;
+ }
+ return (oldmode & 0x20) == 0x20;
}
-static int inf_flags_valid = 0;
-static int inf_in_flag;
-static int inf_out_flag;
+
+static int inf_mode_valid = 0;
+static int inf_terminal_mode;
+
+/* This semaphore is needed because, amazingly enough, GDB calls
+ target.to_terminal_ours more than once after the inferior stops.
+ But we need the information from the first call only, since the
+ second call will always see GDB's own cooked terminal. */
+static int terminal_is_ours = 1;
static void
go32_terminal_init (void)
{
- /* Save the filemodes for stdin/stout */
- inf_in_flag = setmode (0, 0);
- setmode (0, inf_in_flag);
- inf_out_flag = setmode (1, 0);
- setmode (1, inf_out_flag);
- inf_flags_valid = 1;
+ inf_mode_valid = 0; /* reinitialize, in case they are restarting child */
+ terminal_is_ours = 1;
}
static void
-go32_terminal_inferior (void)
+go32_terminal_info (char *args ATTRIBUTE_UNUSED, int from_tty ATTRIBUTE_UNUSED)
{
- /* set the filemodes for stdin/stdout of the inferior */
- if (inf_flags_valid)
+ printf_unfiltered ("Inferior's terminal is in %s mode.\n",
+ !inf_mode_valid
+ ? "default" : inf_terminal_mode ? "raw" : "cooked");
+
+#if __DJGPP_MINOR__ > 2
+ if (child_cmd.redirection)
+ {
+ int i;
+
+ for (i = 0; i < DBG_HANDLES; i++)
{
- setmode (0, inf_in_flag);
- setmode (1, inf_out_flag);
+ if (child_cmd.redirection[i]->file_name)
+ printf_unfiltered ("\tFile handle %d is redirected to `%s'.\n",
+ i, child_cmd.redirection[i]->file_name);
+ else if (_get_dev_info (child_cmd.redirection[i]->inf_handle) == -1)
+ printf_unfiltered
+ ("\tFile handle %d appears to be closed by inferior.\n", i);
+ /* Mask off the raw/cooked bit when comparing device info words. */
+ else if ((_get_dev_info (child_cmd.redirection[i]->inf_handle) & 0xdf)
+ != (_get_dev_info (i) & 0xdf))
+ printf_unfiltered
+ ("\tFile handle %d appears to be redirected by inferior.\n", i);
}
+ }
+#endif
+}
+
+static void
+go32_terminal_inferior (void)
+{
+ /* Redirect standard handles as child wants them. */
+ errno = 0;
+ if (redir_to_child (&child_cmd) == -1)
+ {
+ redir_to_debugger (&child_cmd);
+ error ("Cannot redirect standard handles for program: %s.",
+ strerror (errno));
+ }
+ /* set the console device of the inferior to whatever mode
+ (raw or cooked) we found it last time */
+ if (terminal_is_ours)
+ {
+ if (inf_mode_valid)
+ device_mode (0, inf_terminal_mode);
+ terminal_is_ours = 0;
+ }
}
static void
go32_terminal_ours (void)
{
- /* Switch to text mode on stdin/stdout always on the gdb terminal and
- save the inferior modes to be restored later */
- inf_in_flag = setmode (0, O_TEXT);
- inf_out_flag = setmode (1, O_TEXT);
+ /* Switch to cooked mode on the gdb terminal and save the inferior
+ terminal mode to be restored when it is resumed */
+ if (!terminal_is_ours)
+ {
+ inf_terminal_mode = device_mode (0, 0);
+ if (inf_terminal_mode != -1)
+ inf_mode_valid = 1;
+ else
+ /* If device_mode returned -1, we don't know what happens with
+ handle 0 anymore, so make the info invalid. */
+ inf_mode_valid = 0;
+ terminal_is_ours = 1;
+
+ /* Restore debugger's standard handles. */
+ errno = 0;
+ if (redir_to_debugger (&child_cmd) == -1)
+ {
+ redir_to_child (&child_cmd);
+ error ("Cannot redirect standard handles for debugger: %s.",
+ strerror (errno));
+ }
+ }
}
static void
"Program loaded by djgpp, when gdb is used as an external debugger";
go32_ops.to_open = go32_open;
go32_ops.to_close = go32_close;
+ go32_ops.to_attach = go32_attach;
go32_ops.to_detach = go32_detach;
go32_ops.to_resume = go32_resume;
go32_ops.to_wait = go32_wait;
go32_ops.to_remove_breakpoint = memory_remove_breakpoint;
go32_ops.to_terminal_init = go32_terminal_init;
go32_ops.to_terminal_inferior = go32_terminal_inferior;
- go32_ops.to_terminal_ours_for_output = ignore;
+ go32_ops.to_terminal_ours_for_output = go32_terminal_ours;
go32_ops.to_terminal_ours = go32_terminal_ours;
- go32_ops.to_terminal_info = ignore2;
+ go32_ops.to_terminal_info = go32_terminal_info;
go32_ops.to_kill = go32_kill_inferior;
go32_ops.to_create_inferior = go32_create_inferior;
go32_ops.to_mourn_inferior = go32_mourn_inferior;
go32_ops.to_has_registers = 1;
go32_ops.to_has_execution = 1;
go32_ops.to_magic = OPS_MAGIC;
+
+ /* Initialize child's cwd as empty to be initialized when starting
+ the child. */
+ *child_cwd = 0;
+
+ /* Initialize child's command line storage. */
+ if (redir_debug_init (&child_cmd) == -1)
+ internal_error (__FILE__, __LINE__,
+ "Cannot allocate redirection storage: not enough memory.\n");
+
+ /* We are always processing GCC-compiled programs. */
+ processing_gcc_compilation = 2;
}
void
init_go32_ops ();
add_target (&go32_ops);
}
+
+pid_t
+tcgetpgrp (int fd)
+{
+ if (isatty (fd))
+ return SOME_PID;
+ errno = ENOTTY;
+ return -1;
+}
+
+int
+tcsetpgrp (int fd, pid_t pgid)
+{
+ if (isatty (fd) && pgid == SOME_PID)
+ return 0;
+ errno = pgid == SOME_PID ? ENOTTY : ENOSYS;
+ return -1;
+}
projects / thirdparty / binutils-gdb.git / blobdiff