/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
#include "gdbtypes.h"
#include "target.h"
#include "arch-utils.h"
+#include "regcache.h"
+#include "osabi.h"
#include "opcode/mips.h"
#include "elf/mips.h"
#include "elf-bfd.h"
#include "symcat.h"
+/* A useful bit in the CP0 status register (PS_REGNUM). */
+/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
+#define ST0_FR (1 << 26)
+
/* The sizes of floating point registers. */
enum
enum mips_abi
{
- MIPS_ABI_UNKNOWN,
+ MIPS_ABI_UNKNOWN = 0,
MIPS_ABI_N32,
MIPS_ABI_O32,
+ MIPS_ABI_N64,
MIPS_ABI_O64,
MIPS_ABI_EABI32,
- MIPS_ABI_EABI64
+ MIPS_ABI_EABI64,
+ MIPS_ABI_LAST
};
+static const char *mips_abi_string;
+
+static const char *mips_abi_strings[] = {
+ "auto",
+ "n32",
+ "o32",
+ "n64",
+ "o64",
+ "eabi32",
+ "eabi64",
+ NULL
+};
+
struct frame_extra_info
{
mips_extra_func_info_t proc_desc;
#endif
static int mips_fpu_type_auto = 1;
static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE;
-#define MIPS_FPU_TYPE mips_fpu_type
-
-/* Do not use "TARGET_IS_MIPS64" to test the size of floating point registers */
-#ifndef FP_REGISTER_DOUBLE
-#define FP_REGISTER_DOUBLE (REGISTER_VIRTUAL_SIZE(FP0_REGNUM) == 8)
-#endif
static int mips_debug = 0;
{
/* from the elf header */
int elf_flags;
+
/* mips options */
enum mips_abi mips_abi;
- const char *mips_abi_string;
+ enum mips_abi found_abi;
enum mips_fpu_type mips_fpu_type;
int mips_last_arg_regnum;
int mips_last_fp_arg_regnum;
int mips_default_saved_regsize;
int mips_fp_register_double;
- int mips_regs_have_home_p;
int mips_default_stack_argsize;
int gdb_target_is_mips64;
int default_mask_address_p;
+
+ enum gdb_osabi osabi;
};
-#if GDB_MULTI_ARCH
-#undef MIPS_EABI
#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI32 \
|| gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI64)
-#endif
-#if GDB_MULTI_ARCH
-#undef MIPS_LAST_FP_ARG_REGNUM
#define MIPS_LAST_FP_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_fp_arg_regnum)
-#endif
-#if GDB_MULTI_ARCH
-#undef MIPS_LAST_ARG_REGNUM
#define MIPS_LAST_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_arg_regnum)
-#endif
-#if GDB_MULTI_ARCH
-#undef MIPS_FPU_TYPE
#define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type)
-#endif
/* Return the currently configured (or set) saved register size. */
-#if GDB_MULTI_ARCH
-#undef MIPS_DEFAULT_SAVED_REGSIZE
#define MIPS_DEFAULT_SAVED_REGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_saved_regsize)
-#elif !defined (MIPS_DEFAULT_SAVED_REGSIZE)
-#define MIPS_DEFAULT_SAVED_REGSIZE MIPS_REGSIZE
-#endif
static const char *mips_saved_regsize_string = size_auto;
return 4;
}
+/* Functions for setting and testing a bit in a minimal symbol that
+ marks it as 16-bit function. The MSB of the minimal symbol's
+ "info" field is used for this purpose. This field is already
+ being used to store the symbol size, so the assumption is
+ that the symbol size cannot exceed 2^31.
+
+ ELF_MAKE_MSYMBOL_SPECIAL tests whether an ELF symbol is "special",
+ i.e. refers to a 16-bit function, and sets a "special" bit in a
+ minimal symbol to mark it as a 16-bit function
+
+ MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol
+ MSYMBOL_SIZE returns the size of the minimal symbol, i.e.
+ the "info" field with the "special" bit masked out */
+
+static void
+mips_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym)
+{
+ if (((elf_symbol_type *)(sym))->internal_elf_sym.st_other == STO_MIPS16)
+ {
+ MSYMBOL_INFO (msym) = (char *)
+ (((long) MSYMBOL_INFO (msym)) | 0x80000000);
+ SYMBOL_VALUE_ADDRESS (msym) |= 1;
+ }
+}
+
+static int
+msymbol_is_special (struct minimal_symbol *msym)
+{
+ return (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0);
+}
+
+static long
+msymbol_size (struct minimal_symbol *msym)
+{
+ return ((long) MSYMBOL_INFO (msym) & 0x7fffffff);
+}
+
+/* XFER a value from the big/little/left end of the register.
+ Depending on the size of the value it might occupy the entire
+ register or just part of it. Make an allowance for this, aligning
+ things accordingly. */
+
+static void
+mips_xfer_register (struct regcache *regcache, int reg_num, int length,
+ enum bfd_endian endian, bfd_byte *in, const bfd_byte *out,
+ int buf_offset)
+{
+ bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
+ int reg_offset = 0;
+ /* Need to transfer the left or right part of the register, based on
+ the targets byte order. */
+ switch (endian)
+ {
+ case BFD_ENDIAN_BIG:
+ reg_offset = REGISTER_RAW_SIZE (reg_num) - length;
+ break;
+ case BFD_ENDIAN_LITTLE:
+ reg_offset = 0;
+ break;
+ case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */
+ reg_offset = 0;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr,
+ "xfer $%d, reg offset %d, buf offset %d, length %d, ",
+ reg_num, reg_offset, buf_offset, length);
+ if (mips_debug && out != NULL)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, "out ");
+ for (i = 0; i < length; i++)
+ fprintf_unfiltered (gdb_stdlog, "%02x", out[buf_offset + i]);
+ }
+ if (in != NULL)
+ regcache_raw_read_part (regcache, reg_num, reg_offset, length, in + buf_offset);
+ if (out != NULL)
+ regcache_raw_write_part (regcache, reg_num, reg_offset, length, out + buf_offset);
+ if (mips_debug && in != NULL)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, "in ");
+ for (i = 0; i < length; i++)
+ fprintf_unfiltered (gdb_stdlog, "%02x", in[buf_offset + i]);
+ }
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
+}
+
+/* Determine if a MIPS3 or later cpu is operating in MIPS{1,2} FPU
+ compatiblity mode. A return value of 1 means that we have
+ physical 64-bit registers, but should treat them as 32-bit registers. */
+
+static int
+mips2_fp_compat (void)
+{
+ /* MIPS1 and MIPS2 have only 32 bit FPRs, and the FR bit is not
+ meaningful. */
+ if (REGISTER_RAW_SIZE (FP0_REGNUM) == 4)
+ return 0;
+
+#if 0
+ /* FIXME drow 2002-03-10: This is disabled until we can do it consistently,
+ in all the places we deal with FP registers. PR gdb/413. */
+ /* Otherwise check the FR bit in the status register - it controls
+ the FP compatiblity mode. If it is clear we are in compatibility
+ mode. */
+ if ((read_register (PS_REGNUM) & ST0_FR) == 0)
+ return 1;
+#endif
+
+ return 0;
+}
+
/* Indicate that the ABI makes use of double-precision registers
provided by the FPU (rather than combining pairs of registers to
form double-precision values). Do not use "TARGET_IS_MIPS64" to
determine if the ABI is using double-precision registers. See also
MIPS_FPU_TYPE. */
-#if GDB_MULTI_ARCH
-#undef FP_REGISTER_DOUBLE
#define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double)
-#endif
-
-/* Does the caller allocate a ``home'' for each register used in the
- function call? The N32 ABI and MIPS_EABI do not, the others do. */
-
-#if GDB_MULTI_ARCH
-#undef MIPS_REGS_HAVE_HOME_P
-#define MIPS_REGS_HAVE_HOME_P (gdbarch_tdep (current_gdbarch)->mips_regs_have_home_p)
-#elif !defined (MIPS_REGS_HAVE_HOME_P)
-#define MIPS_REGS_HAVE_HOME_P (!MIPS_EABI)
-#endif
/* The amount of space reserved on the stack for registers. This is
different to MIPS_SAVED_REGSIZE as it determines the alignment of
data allocated after the registers have run out. */
-#if GDB_MULTI_ARCH
-#undef MIPS_DEFAULT_STACK_ARGSIZE
#define MIPS_DEFAULT_STACK_ARGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_stack_argsize)
-#elif !defined (MIPS_DEFAULT_STACK_ARGSIZE)
-#define MIPS_DEFAULT_STACK_ARGSIZE (MIPS_DEFAULT_SAVED_REGSIZE)
-#endif
#define MIPS_STACK_ARGSIZE (mips_stack_argsize ())
return 4;
}
-#if GDB_MULTI_ARCH
-#undef GDB_TARGET_IS_MIPS64
#define GDB_TARGET_IS_MIPS64 (gdbarch_tdep (current_gdbarch)->gdb_target_is_mips64 + 0)
-#endif
-#if GDB_MULTI_ARCH
-#undef MIPS_DEFAULT_MASK_ADDRESS_P
#define MIPS_DEFAULT_MASK_ADDRESS_P (gdbarch_tdep (current_gdbarch)->default_mask_address_p)
-#elif !defined (MIPS_DEFAULT_MASK_ADDRESS_P)
-#define MIPS_DEFAULT_MASK_ADDRESS_P (0)
-#endif
#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
static void mips_print_register (int, int);
static mips_extra_func_info_t
-heuristic_proc_desc (CORE_ADDR, CORE_ADDR, struct frame_info *);
+heuristic_proc_desc (CORE_ADDR, CORE_ADDR, struct frame_info *, int);
static CORE_ADDR heuristic_proc_start (CORE_ADDR);
static CORE_ADDR read_next_frame_reg (struct frame_info *, int);
-int mips_set_processor_type (char *);
+static int mips_set_processor_type (char *);
static void mips_show_processor_type_command (char *, int);
static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *);
static mips_extra_func_info_t
-find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame);
+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame);
static CORE_ADDR after_prologue (CORE_ADDR pc,
mips_extra_func_info_t proc_desc);
+static void mips_read_fp_register_single (int regno, char *rare_buffer);
+static void mips_read_fp_register_double (int regno, char *rare_buffer);
+
+static struct type *mips_float_register_type (void);
+static struct type *mips_double_register_type (void);
+
/* This value is the model of MIPS in use. It is derived from the value
of the PrID register. */
char *mips_generic_reg_names[] = MIPS_REGISTER_NAMES;
char **mips_processor_reg_names = mips_generic_reg_names;
-char *
+static const char *
mips_register_name (int i)
{
return mips_processor_reg_names[i];
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "fp", "",
+ "fsr", "fir", "",/*"fp"*/ "",
"", "", "bus", "ccfg", "", "", "", "",
"", "", "port", "cmp", "", "", "epc", "prid",
};
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "fp", "",
+ "fsr", "fir", ""/*"fp"*/, "",
"inx", "rand", "elo", "", "ctxt", "", "", "",
"", "", "ehi", "", "", "", "epc", "prid",
};
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "fp", "",
+ "fsr", "fir", ""/*"fp"*/, "",
"inx", "rand", "elo", "cfg", "ctxt", "", "", "",
"", "", "ehi", "", "", "", "epc", "prid",
};
#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset)
#define PROC_FREG_OFFSET(proc) ((proc)->pdr.fregoffset)
#define PROC_PC_REG(proc) ((proc)->pdr.pcreg)
+/* FIXME drow/2002-06-10: If a pointer on the host is bigger than a long,
+ this will corrupt pdr.iline. Fortunately we don't use it. */
#define PROC_SYMBOL(proc) (*(struct symbol**)&(proc)->pdr.isym)
#define _PROC_MAGIC_ 0x0F0F0F0F
#define PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym == _PROC_MAGIC_)
paddr_d (fi->extra_info->proc_desc->pdr.frameoffset));
}
-/* Convert between RAW and VIRTUAL registers. The RAW register size
- defines the remote-gdb packet. */
+/* Number of bytes of storage in the actual machine representation for
+ register N. NOTE: This indirectly defines the register size
+ transfered by the GDB protocol. */
static int mips64_transfers_32bit_regs_p = 0;
-int
+static int
mips_register_raw_size (int reg_nr)
{
if (mips64_transfers_32bit_regs_p)
return REGISTER_VIRTUAL_SIZE (reg_nr);
+ else if (reg_nr >= FP0_REGNUM && reg_nr < FP0_REGNUM + 32
+ && FP_REGISTER_DOUBLE)
+ /* For MIPS_ABI_N32 (for example) we need 8 byte floating point
+ registers. */
+ return 8;
else
return MIPS_REGSIZE;
}
-int
+/* Convert between RAW and VIRTUAL registers. The RAW register size
+ defines the remote-gdb packet. */
+
+static int
mips_register_convertible (int reg_nr)
{
if (mips64_transfers_32bit_regs_p)
return (REGISTER_RAW_SIZE (reg_nr) > REGISTER_VIRTUAL_SIZE (reg_nr));
}
-void
+static void
mips_register_convert_to_virtual (int n, struct type *virtual_type,
char *raw_buf, char *virt_buf)
{
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
memcpy (virt_buf,
raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
TYPE_LENGTH (virtual_type));
TYPE_LENGTH (virtual_type));
}
-void
+static void
mips_register_convert_to_raw (struct type *virtual_type, int n,
char *virt_buf, char *raw_buf)
{
memset (raw_buf, 0, REGISTER_RAW_SIZE (n));
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
memcpy (raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
virt_buf,
TYPE_LENGTH (virtual_type));
TYPE_LENGTH (virtual_type));
}
+void
+mips_register_convert_to_type (int regnum, struct type *type, char *buffer)
+{
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && REGISTER_RAW_SIZE (regnum) == 4
+ && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32
+ && TYPE_CODE(type) == TYPE_CODE_FLT
+ && TYPE_LENGTH(type) == 8)
+ {
+ char temp[4];
+ memcpy (temp, ((char *)(buffer))+4, 4);
+ memcpy (((char *)(buffer))+4, (buffer), 4);
+ memcpy (((char *)(buffer)), temp, 4);
+ }
+}
+
+void
+mips_register_convert_from_type (int regnum, struct type *type, char *buffer)
+{
+if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && REGISTER_RAW_SIZE (regnum) == 4
+ && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32
+ && TYPE_CODE(type) == TYPE_CODE_FLT
+ && TYPE_LENGTH(type) == 8)
+ {
+ char temp[4];
+ memcpy (temp, ((char *)(buffer))+4, 4);
+ memcpy (((char *)(buffer))+4, (buffer), 4);
+ memcpy (((char *)(buffer)), temp, 4);
+ }
+}
+
+/* Return the GDB type object for the "standard" data type
+ of data in register REG.
+
+ Note: kevinb/2002-08-01: The definition below should faithfully
+ reproduce the behavior of each of the REGISTER_VIRTUAL_TYPE
+ definitions found in config/mips/tm-*.h. I'm concerned about
+ the ``FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM'' clause
+ though. In some cases FP_REGNUM is in this range, and I doubt
+ that this code is correct for the 64-bit case. */
+
+static struct type *
+mips_register_virtual_type (int reg)
+{
+ if (FP0_REGNUM <= reg && reg < FP0_REGNUM + 32)
+ {
+ /* Floating point registers... */
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ return builtin_type_ieee_double_big;
+ else
+ return builtin_type_ieee_double_little;
+ }
+ else if (reg == PS_REGNUM /* CR */)
+ return builtin_type_uint32;
+ else if (FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM)
+ return builtin_type_uint32;
+ else
+ {
+ /* Everything else...
+ Return type appropriate for width of register. */
+ if (MIPS_REGSIZE == TYPE_LENGTH (builtin_type_uint64))
+ return builtin_type_uint64;
+ else
+ return builtin_type_uint32;
+ }
+}
+
+/* TARGET_READ_SP -- Remove useless bits from the stack pointer. */
+
+static CORE_ADDR
+mips_read_sp (void)
+{
+ return ADDR_BITS_REMOVE (read_register (SP_REGNUM));
+}
+
/* Should the upper word of 64-bit addresses be zeroed? */
-enum cmd_auto_boolean mask_address_var = CMD_AUTO_BOOLEAN_AUTO;
+enum auto_boolean mask_address_var = AUTO_BOOLEAN_AUTO;
static int
mips_mask_address_p (void)
{
switch (mask_address_var)
{
- case CMD_AUTO_BOOLEAN_TRUE:
+ case AUTO_BOOLEAN_TRUE:
return 1;
- case CMD_AUTO_BOOLEAN_FALSE:
+ case AUTO_BOOLEAN_FALSE:
return 0;
break;
- case CMD_AUTO_BOOLEAN_AUTO:
+ case AUTO_BOOLEAN_AUTO:
return MIPS_DEFAULT_MASK_ADDRESS_P;
default:
- internal_error ("mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__,
+ "mips_mask_address_p: bad switch");
return -1;
- }
+ }
}
static void
-show_mask_address (char *cmd, int from_tty)
+show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c)
{
switch (mask_address_var)
{
- case CMD_AUTO_BOOLEAN_TRUE:
+ case AUTO_BOOLEAN_TRUE:
printf_filtered ("The 32 bit mips address mask is enabled\n");
break;
- case CMD_AUTO_BOOLEAN_FALSE:
+ case AUTO_BOOLEAN_FALSE:
printf_filtered ("The 32 bit mips address mask is disabled\n");
break;
- case CMD_AUTO_BOOLEAN_AUTO:
+ case AUTO_BOOLEAN_AUTO:
printf_filtered ("The 32 bit address mask is set automatically. Currently %s\n",
mips_mask_address_p () ? "enabled" : "disabled");
break;
default:
- internal_error ("show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__,
+ "show_mask_address: bad switch");
break;
- }
+ }
}
/* Should call_function allocate stack space for a struct return? */
-int
-mips_use_struct_convention (int gcc_p, struct type *type)
+
+static int
+mips_eabi_use_struct_convention (int gcc_p, struct type *type)
{
- if (MIPS_EABI)
- return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
- else
- return 1; /* Structures are returned by ref in extra arg0 */
+ return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
+}
+
+static int
+mips_n32n64_use_struct_convention (int gcc_p, struct type *type)
+{
+ return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
+}
+
+static int
+mips_o32_use_struct_convention (int gcc_p, struct type *type)
+{
+ return 1; /* Structures are returned by ref in extra arg0. */
+}
+
+/* Should call_function pass struct by reference?
+ For each architecture, structs are passed either by
+ value or by reference, depending on their size. */
+
+static int
+mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (check_typedef (type));
+ int len = TYPE_LENGTH (check_typedef (type));
+
+ if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
+ return (len > MIPS_SAVED_REGSIZE);
+
+ return 0;
+}
+
+static int
+mips_n32n64_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ return 0; /* Assumption: N32/N64 never passes struct by ref. */
+}
+
+static int
+mips_o32_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ return 0; /* Assumption: O32/O64 never passes struct by ref. */
}
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
MIPS16 or normal MIPS. */
sym = lookup_minimal_symbol_by_pc (memaddr);
if (sym)
- return MSYMBOL_IS_SPECIAL (sym);
+ return msymbol_is_special (sym);
else
return 0;
}
all registers should be sign extended for simplicity? */
static CORE_ADDR
-mips_read_pc (int pid)
+mips_read_pc (ptid_t ptid)
{
- return read_signed_register_pid (PC_REGNUM, pid);
+ return read_signed_register_pid (PC_REGNUM, ptid);
}
/* This returns the PC of the first inst after the prologue. If we can't
struct symtab_and_line sal;
CORE_ADDR func_addr, func_end;
+ /* Pass cur_frame == 0 to find_proc_desc. We should not attempt
+ to read the stack pointer from the current machine state, because
+ the current machine state has nothing to do with the information
+ we need from the proc_desc; and the process may or may not exist
+ right now. */
if (!proc_desc)
- proc_desc = find_proc_desc (pc, NULL);
+ proc_desc = find_proc_desc (pc, NULL, 0);
if (proc_desc)
{
/* These the fields of 32 bit mips instructions */
-#define mips32_op(x) (x >> 25)
-#define itype_op(x) (x >> 25)
-#define itype_rs(x) ((x >> 21)& 0x1f)
+#define mips32_op(x) (x >> 26)
+#define itype_op(x) (x >> 26)
+#define itype_rs(x) ((x >> 21) & 0x1f)
#define itype_rt(x) ((x >> 16) & 0x1f)
-#define itype_immediate(x) ( x & 0xffff)
+#define itype_immediate(x) (x & 0xffff)
-#define jtype_op(x) (x >> 25)
-#define jtype_target(x) ( x & 0x03fffff)
+#define jtype_op(x) (x >> 26)
+#define jtype_target(x) (x & 0x03ffffff)
-#define rtype_op(x) (x >>25)
-#define rtype_rs(x) ((x>>21) & 0x1f)
-#define rtype_rt(x) ((x>>16) & 0x1f)
-#define rtype_rd(x) ((x>>11) & 0x1f)
-#define rtype_shamt(x) ((x>>6) & 0x1f)
-#define rtype_funct(x) (x & 0x3f )
+#define rtype_op(x) (x >> 26)
+#define rtype_rs(x) ((x >> 21) & 0x1f)
+#define rtype_rt(x) ((x >> 16) & 0x1f)
+#define rtype_rd(x) ((x >> 11) & 0x1f)
+#define rtype_shamt(x) ((x >> 6) & 0x1f)
+#define rtype_funct(x) (x & 0x3f)
static CORE_ADDR
mips32_relative_offset (unsigned long inst)
/* Determine whate to set a single step breakpoint while considering
branch prediction */
-CORE_ADDR
+static CORE_ADDR
mips32_next_pc (CORE_ADDR pc)
{
unsigned long inst;
int op;
inst = mips_fetch_instruction (pc);
- if ((inst & 0xe0000000) != 0) /* Not a special, junp or branch instruction */
+ if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch instruction */
{
- if ((inst >> 27) == 5) /* BEQL BNEZ BLEZL BGTZE , bits 0101xx */
+ if (itype_op (inst) >> 2 == 5)
+ /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
{
- op = ((inst >> 25) & 0x03);
+ op = (itype_op (inst) & 0x03);
switch (op)
{
- case 0:
- goto equal_branch; /* BEQL */
- case 1:
- goto neq_branch; /* BNEZ */
- case 2:
- goto less_branch; /* BLEZ */
- case 3:
- goto greater_branch; /* BGTZ */
+ case 0: /* BEQL */
+ goto equal_branch;
+ case 1: /* BNEL */
+ goto neq_branch;
+ case 2: /* BLEZL */
+ goto less_branch;
+ case 3: /* BGTZ */
+ goto greater_branch;
default:
pc += 4;
}
}
+ else if (itype_op (inst) == 17 && itype_rs (inst) == 8)
+ /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ {
+ int tf = itype_rt (inst) & 0x01;
+ int cnum = itype_rt (inst) >> 2;
+ int fcrcs = read_signed_register (FCRCS_REGNUM);
+ int cond = ((fcrcs >> 24) & 0x0e) | ((fcrcs >> 23) & 0x01);
+
+ if (((cond >> cnum) & 0x01) == tf)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ }
else
pc += 4; /* Not a branch, next instruction is easy */
}
{ /* This gets way messy */
/* Further subdivide into SPECIAL, REGIMM and other */
- switch (op = ((inst >> 26) & 0x07)) /* extract bits 28,27,26 */
+ switch (op = itype_op (inst) & 0x07) /* extract bits 28,27,26 */
{
case 0: /* SPECIAL */
op = rtype_funct (inst);
pc += 4;
}
- break; /* end special */
+ break; /* end SPECIAL */
case 1: /* REGIMM */
{
- op = jtype_op (inst); /* branch condition */
- switch (jtype_op (inst))
+ op = itype_rt (inst); /* branch condition */
+ switch (op)
{
case 0: /* BLTZ */
- case 2: /* BLTXL */
- case 16: /* BLTZALL */
+ case 2: /* BLTZL */
+ case 16: /* BLTZAL */
case 18: /* BLTZALL */
less_branch:
if (read_signed_register (itype_rs (inst)) < 0)
else
pc += 8; /* after the delay slot */
break;
- case 1: /* GEZ */
+ case 1: /* BGEZ */
case 3: /* BGEZL */
case 17: /* BGEZAL */
case 19: /* BGEZALL */
else
pc += 8; /* after the delay slot */
break;
- /* All of the other intructions in the REGIMM catagory */
+ /* All of the other instructions in the REGIMM category */
default:
pc += 4;
}
}
- break; /* end REGIMM */
+ break; /* end REGIMM */
case 2: /* J */
case 3: /* JAL */
{
unsigned long reg;
reg = jtype_target (inst) << 2;
+ /* Upper four bits get never changed... */
pc = reg + ((pc + 4) & 0xf0000000);
- /* Whats this mysterious 0xf000000 adjustment ??? */
}
break;
/* FIXME case JALX : */
/* Add 1 to indicate 16 bit mode - Invert ISA mode */
}
break; /* The new PC will be alternate mode */
- case 4: /* BEQ , BEQL */
+ case 4: /* BEQ, BEQL */
equal_branch:
if (read_signed_register (itype_rs (inst)) ==
read_signed_register (itype_rt (inst)))
else
pc += 8;
break;
- case 5: /* BNE , BNEL */
+ case 5: /* BNE, BNEL */
neq_branch:
if (read_signed_register (itype_rs (inst)) !=
- read_signed_register (itype_rs (inst)))
+ read_signed_register (itype_rt (inst)))
pc += mips32_relative_offset (inst) + 4;
else
pc += 8;
break;
- case 6: /* BLEZ , BLEZL */
+ case 6: /* BLEZ, BLEZL */
less_zero_branch:
if (read_signed_register (itype_rs (inst) <= 0))
pc += mips32_relative_offset (inst) + 4;
pc += 8;
break;
case 7:
- greater_branch: /* BGTZ BGTZL */
+ default:
+ greater_branch: /* BGTZ, BGTZL */
if (read_signed_register (itype_rs (inst) > 0))
pc += mips32_relative_offset (inst) + 4;
else
pc += 8;
break;
- default:
- pc += 8;
} /* switch */
} /* else */
return pc;
extRi64type, /* 20 5,6,5,5,3,3,5 */
extshift64type /* 21 5,5,1,1,1,1,1,1,5,1,1,1,3,5 */
};
-/* I am heaping all the fields of the formats into one structure and then,
- only the fields which are involved in instruction extension */
+/* I am heaping all the fields of the formats into one structure and
+ then, only the fields which are involved in instruction extension */
struct upk_mips16
{
- unsigned short inst;
- enum mips16_inst_fmts fmt;
- unsigned long offset;
+ CORE_ADDR offset;
unsigned int regx; /* Function in i8 type */
unsigned int regy;
};
+/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same format
+ for the bits which make up the immediatate extension. */
-static void
-print_unpack (char *comment,
- struct upk_mips16 *u)
-{
- printf ("%s %04x ,f(%d) off(%s) (x(%x) y(%x)\n",
- comment, u->inst, u->fmt, paddr (u->offset), u->regx, u->regy);
-}
-
-/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same
- format for the bits which make up the immediatate extension.
- */
-static unsigned long
-extended_offset (unsigned long extension)
+static CORE_ADDR
+extended_offset (unsigned int extension)
{
- unsigned long value;
+ CORE_ADDR value;
value = (extension >> 21) & 0x3f; /* * extract 15:11 */
value = value << 6;
value |= (extension >> 16) & 0x1f; /* extrace 10:5 */
when the offset is to be used in relative addressing */
-static unsigned short
+static unsigned int
fetch_mips_16 (CORE_ADDR pc)
{
char buf[8];
static void
unpack_mips16 (CORE_ADDR pc,
+ unsigned int extension,
+ unsigned int inst,
+ enum mips16_inst_fmts insn_format,
struct upk_mips16 *upk)
{
- CORE_ADDR extpc;
- unsigned long extension;
- int extended;
- extpc = (pc - 4) & ~0x01; /* Extensions are 32 bit instructions */
- /* Decrement to previous address and loose the 16bit mode flag */
- /* return if the instruction was extendable, but not actually extended */
- extended = ((mips32_op (extension) == 30) ? 1 : 0);
- if (extended)
- {
- extension = mips_fetch_instruction (extpc);
- }
- switch (upk->fmt)
+ CORE_ADDR offset;
+ int regx;
+ int regy;
+ switch (insn_format)
{
case itype:
{
- unsigned long value;
- if (extended)
+ CORE_ADDR value;
+ if (extension)
{
value = extended_offset (extension);
value = value << 11; /* rom for the original value */
- value |= upk->inst & 0x7ff; /* eleven bits from instruction */
+ value |= inst & 0x7ff; /* eleven bits from instruction */
}
else
{
- value = upk->inst & 0x7ff;
+ value = inst & 0x7ff;
/* FIXME : Consider sign extension */
}
- upk->offset = value;
+ offset = value;
+ regx = -1;
+ regy = -1;
}
break;
case ritype:
{ /* A register identifier and an offset */
/* Most of the fields are the same as I type but the
immediate value is of a different length */
- unsigned long value;
- if (extended)
+ CORE_ADDR value;
+ if (extension)
{
value = extended_offset (extension);
value = value << 8; /* from the original instruction */
- value |= upk->inst & 0xff; /* eleven bits from instruction */
- upk->regx = (extension >> 8) & 0x07; /* or i8 funct */
+ value |= inst & 0xff; /* eleven bits from instruction */
+ regx = (extension >> 8) & 0x07; /* or i8 funct */
if (value & 0x4000) /* test the sign bit , bit 26 */
{
value &= ~0x3fff; /* remove the sign bit */
}
else
{
- value = upk->inst & 0xff; /* 8 bits */
- upk->regx = (upk->inst >> 8) & 0x07; /* or i8 funct */
+ value = inst & 0xff; /* 8 bits */
+ regx = (inst >> 8) & 0x07; /* or i8 funct */
/* FIXME: Do sign extension , this format needs it */
if (value & 0x80) /* THIS CONFUSES ME */
{
value &= 0xef; /* remove the sign bit */
value = -value;
}
-
}
- upk->offset = value;
+ offset = value;
+ regy = -1;
break;
}
case jalxtype:
{
unsigned long value;
- unsigned short nexthalf;
- value = ((upk->inst & 0x1f) << 5) | ((upk->inst >> 5) & 0x1f);
+ unsigned int nexthalf;
+ value = ((inst & 0x1f) << 5) | ((inst >> 5) & 0x1f);
value = value << 16;
nexthalf = mips_fetch_instruction (pc + 2); /* low bit still set */
value |= nexthalf;
- upk->offset = value;
+ offset = value;
+ regx = -1;
+ regy = -1;
break;
}
default:
- printf_filtered ("Decoding unimplemented instruction format type\n");
- break;
+ internal_error (__FILE__, __LINE__,
+ "bad switch");
}
- /* print_unpack("UPK",upk) ; */
+ upk->offset = offset;
+ upk->regx = regx;
+ upk->regy = regy;
}
-#define mips16_op(x) (x >> 11)
-
-/* This is a map of the opcodes which ae known to perform branches */
-static unsigned char map16[32] =
-{0, 0, 1, 1, 1, 1, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 1, 0
-};
-
static CORE_ADDR
add_offset_16 (CORE_ADDR pc, int offset)
{
return ((offset << 2) | ((pc + 2) & (0xf0000000)));
-
}
-
-
-static struct upk_mips16 upk;
-
-CORE_ADDR
-mips16_next_pc (CORE_ADDR pc)
+static CORE_ADDR
+extended_mips16_next_pc (CORE_ADDR pc,
+ unsigned int extension,
+ unsigned int insn)
{
- int op;
- t_inst inst;
- /* inst = mips_fetch_instruction(pc) ; - This doesnt always work */
- inst = fetch_mips_16 (pc);
- upk.inst = inst;
- op = mips16_op (upk.inst);
- if (map16[op])
+ int op = (insn >> 11);
+ switch (op)
{
- int reg;
- switch (op)
- {
- case 2: /* Branch */
- upk.fmt = itype;
- unpack_mips16 (pc, &upk);
+ case 2: /* Branch */
+ {
+ CORE_ADDR offset;
+ struct upk_mips16 upk;
+ unpack_mips16 (pc, extension, insn, itype, &upk);
+ offset = upk.offset;
+ if (offset & 0x800)
+ {
+ offset &= 0xeff;
+ offset = -offset;
+ }
+ pc += (offset << 1) + 2;
+ break;
+ }
+ case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
+ {
+ struct upk_mips16 upk;
+ unpack_mips16 (pc, extension, insn, jalxtype, &upk);
+ pc = add_offset_16 (pc, upk.offset);
+ if ((insn >> 10) & 0x01) /* Exchange mode */
+ pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode */
+ else
+ pc |= 0x01;
+ break;
+ }
+ case 4: /* beqz */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, ritype, &upk);
+ reg = read_signed_register (upk.regx);
+ if (reg == 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 5: /* bnez */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, ritype, &upk);
+ reg = read_signed_register (upk.regx);
+ if (reg != 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 12: /* I8 Formats btez btnez */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, i8type, &upk);
+ /* upk.regx contains the opcode */
+ reg = read_signed_register (24); /* Test register is 24 */
+ if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
+ || ((upk.regx == 1) && (reg != 0))) /* BTNEZ */
+ /* pc = add_offset_16(pc,upk.offset) ; */
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 29: /* RR Formats JR, JALR, JALR-RA */
+ {
+ struct upk_mips16 upk;
+ /* upk.fmt = rrtype; */
+ op = insn & 0x1f;
+ if (op == 0)
{
- long offset;
- offset = upk.offset;
- if (offset & 0x800)
+ int reg;
+ upk.regx = (insn >> 8) & 0x07;
+ upk.regy = (insn >> 5) & 0x07;
+ switch (upk.regy)
{
- offset &= 0xeff;
- offset = -offset;
+ case 0:
+ reg = upk.regx;
+ break;
+ case 1:
+ reg = 31;
+ break; /* Function return instruction */
+ case 2:
+ reg = upk.regx;
+ break;
+ default:
+ reg = 31;
+ break; /* BOGUS Guess */
}
- pc += (offset << 1) + 2;
+ pc = read_signed_register (reg);
}
- break;
- case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
- upk.fmt = jalxtype;
- unpack_mips16 (pc, &upk);
- pc = add_offset_16 (pc, upk.offset);
- if ((upk.inst >> 10) & 0x01) /* Exchange mode */
- pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode */
- else
- pc |= 0x01;
- break;
- case 4: /* beqz */
- upk.fmt = ritype;
- unpack_mips16 (pc, &upk);
- reg = read_signed_register (upk.regx);
- if (reg == 0)
- pc += (upk.offset << 1) + 2;
- else
- pc += 2;
- break;
- case 5: /* bnez */
- upk.fmt = ritype;
- unpack_mips16 (pc, &upk);
- reg = read_signed_register (upk.regx);
- if (reg != 0)
- pc += (upk.offset << 1) + 2;
- else
- pc += 2;
- break;
- case 12: /* I8 Formats btez btnez */
- upk.fmt = i8type;
- unpack_mips16 (pc, &upk);
- /* upk.regx contains the opcode */
- reg = read_signed_register (24); /* Test register is 24 */
- if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
- || ((upk.regx == 1) && (reg != 0))) /* BTNEZ */
- /* pc = add_offset_16(pc,upk.offset) ; */
- pc += (upk.offset << 1) + 2;
- else
- pc += 2;
- break;
- case 29: /* RR Formats JR, JALR, JALR-RA */
- upk.fmt = rrtype;
- op = upk.inst & 0x1f;
- if (op == 0)
- {
- upk.regx = (upk.inst >> 8) & 0x07;
- upk.regy = (upk.inst >> 5) & 0x07;
- switch (upk.regy)
- {
- case 0:
- reg = upk.regx;
- break;
- case 1:
- reg = 31;
- break; /* Function return instruction */
- case 2:
- reg = upk.regx;
- break;
- default:
- reg = 31;
- break; /* BOGUS Guess */
- }
- pc = read_signed_register (reg);
- }
- else
- pc += 2;
- break;
- case 30: /* This is an extend instruction */
- pc += 4; /* Dont be setting breakpints on the second half */
- break;
- default:
- printf ("Filtered - next PC probably incorrrect due to jump inst\n");
+ else
pc += 2;
- break;
- }
+ break;
+ }
+ case 30:
+ /* This is an instruction extension. Fetch the real instruction
+ (which follows the extension) and decode things based on
+ that. */
+ {
+ pc += 2;
+ pc = extended_mips16_next_pc (pc, insn, fetch_mips_16 (pc));
+ break;
+ }
+ default:
+ {
+ pc += 2;
+ break;
+ }
}
- else
- pc += 2; /* just a good old instruction */
- /* See if we CAN actually break on the next instruction */
- /* printf("NXTm16PC %08x\n",(unsigned long)pc) ; */
return pc;
-} /* mips16_next_pc */
+}
-/* The mips_next_pc function supports single_tep when the remote target monitor or
- stub is not developed enough to so a single_step.
- It works by decoding the current instruction and predicting where a branch
- will go. This isnt hard because all the data is available.
- The MIPS32 and MIPS16 variants are quite different
- */
+static CORE_ADDR
+mips16_next_pc (CORE_ADDR pc)
+{
+ unsigned int insn = fetch_mips_16 (pc);
+ return extended_mips16_next_pc (pc, 0, insn);
+}
+
+/* The mips_next_pc function supports single_step when the remote
+ target monitor or stub is not developed enough to do a single_step.
+ It works by decoding the current instruction and predicting where a
+ branch will go. This isnt hard because all the data is available.
+ The MIPS32 and MIPS16 variants are quite different */
CORE_ADDR
mips_next_pc (CORE_ADDR pc)
{
- t_inst inst;
- /* inst = mips_fetch_instruction(pc) ; */
- /* if (pc_is_mips16) <----- This is failing */
if (pc & 0x01)
return mips16_next_pc (pc);
else
return mips32_next_pc (pc);
-} /* mips_next_pc */
+}
/* Guaranteed to set fci->saved_regs to some values (it never leaves it
- NULL). */
+ NULL).
-void
+ Note: kevinb/2002-08-09: The only caller of this function is (and
+ should remain) mips_frame_init_saved_regs(). In fact,
+ aside from calling mips_find_saved_regs(), mips_frame_init_saved_regs()
+ does nothing more than set frame->saved_regs[SP_REGNUM]. These two
+ functions should really be combined and now that there is only one
+ caller, it should be straightforward. (Watch out for multiple returns
+ though.) */
+
+static void
mips_find_saved_regs (struct frame_info *fci)
{
int ireg;
were saved. */
reg_position = fci->frame + PROC_FREG_OFFSET (proc_desc);
- /* The freg_offset points to where the first *double* register
- is saved. So skip to the high-order word. */
- if (!GDB_TARGET_IS_MIPS64)
+ /* Apparently, the freg_offset gives the offset to the first 64 bit
+ saved.
+
+ When the ABI specifies 64 bit saved registers, the FREG_OFFSET
+ designates the first saved 64 bit register.
+
+ When the ABI specifies 32 bit saved registers, the ``64 bit saved
+ DOUBLE'' consists of two adjacent 32 bit registers, Hence
+ FREG_OFFSET, designates the address of the lower register of the
+ register pair. Adjust the offset so that it designates the upper
+ register of the pair -- i.e., the address of the first saved 32
+ bit register. */
+
+ if (MIPS_SAVED_REGSIZE == 4)
reg_position += MIPS_SAVED_REGSIZE;
/* Fill in the offsets for the float registers which float_mask says
fci->saved_regs[PC_REGNUM] = fci->saved_regs[RA_REGNUM];
}
-static CORE_ADDR
-read_next_frame_reg (struct frame_info *fi, int regno)
+/* Set up the 'saved_regs' array. This is a data structure containing
+ the addresses on the stack where each register has been saved, for
+ each stack frame. Registers that have not been saved will have
+ zero here. The stack pointer register is special: rather than the
+ address where the stack register has been saved, saved_regs[SP_REGNUM]
+ will have the actual value of the previous frame's stack register. */
+
+static void
+mips_frame_init_saved_regs (struct frame_info *frame)
{
- for (; fi; fi = fi->next)
+ if (frame->saved_regs == NULL)
{
- /* We have to get the saved sp from the sigcontext
- if it is a signal handler frame. */
- if (regno == SP_REGNUM && !fi->signal_handler_caller)
- return fi->frame;
- else
- {
- if (fi->saved_regs == NULL)
- mips_find_saved_regs (fi);
- if (fi->saved_regs[regno])
- return read_memory_integer (ADDR_BITS_REMOVE (fi->saved_regs[regno]), MIPS_SAVED_REGSIZE);
- }
+ mips_find_saved_regs (frame);
}
- return read_signed_register (regno);
+ frame->saved_regs[SP_REGNUM] = frame->frame;
+}
+
+static CORE_ADDR
+read_next_frame_reg (struct frame_info *fi, int regno)
+{
+ int optimized;
+ CORE_ADDR addr;
+ int realnum;
+ enum lval_type lval;
+ void *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
+ frame_register_unwind (fi, regno, &optimized, &lval, &addr, &realnum,
+ raw_buffer);
+ /* FIXME: cagney/2002-09-13: This is just soooo bad. The MIPS
+ should have a pseudo register range that correspons to the ABI's,
+ rather than the ISA's, view of registers. These registers would
+ then implicitly describe their size and hence could be used
+ without the below munging. */
+ if (lval == lval_memory)
+ {
+ if (regno < 32)
+ {
+ /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
+ saved. */
+ return read_memory_integer (addr, MIPS_SAVED_REGSIZE);
+ }
+ }
+
+ return extract_signed_integer (raw_buffer, REGISTER_VIRTUAL_SIZE (regno));
}
/* mips_addr_bits_remove - remove useless address bits */
-CORE_ADDR
+static CORE_ADDR
mips_addr_bits_remove (CORE_ADDR addr)
{
if (GDB_TARGET_IS_MIPS64)
return addr;
}
+/* mips_software_single_step() is called just before we want to resume
+ the inferior, if we want to single-step it but there is no hardware
+ or kernel single-step support (MIPS on GNU/Linux for example). We find
+ the target of the coming instruction and breakpoint it.
+
+ single_step is also called just after the inferior stops. If we had
+ set up a simulated single-step, we undo our damage. */
+
void
+mips_software_single_step (enum target_signal sig, int insert_breakpoints_p)
+{
+ static CORE_ADDR next_pc;
+ typedef char binsn_quantum[BREAKPOINT_MAX];
+ static binsn_quantum break_mem;
+ CORE_ADDR pc;
+
+ if (insert_breakpoints_p)
+ {
+ pc = read_register (PC_REGNUM);
+ next_pc = mips_next_pc (pc);
+
+ target_insert_breakpoint (next_pc, break_mem);
+ }
+ else
+ target_remove_breakpoint (next_pc, break_mem);
+}
+
+static void
mips_init_frame_pc_first (int fromleaf, struct frame_info *prev)
{
CORE_ADDR pc, tmp;
pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
- tmp = mips_skip_stub (pc);
+ tmp = SKIP_TRAMPOLINE_CODE (pc);
prev->pc = tmp ? tmp : pc;
}
-CORE_ADDR
+static CORE_ADDR
mips_frame_saved_pc (struct frame_info *frame)
{
CORE_ADDR saved_pc;
int pcreg = frame->signal_handler_caller ? PC_REGNUM
: (proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
- if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
+ if (USE_GENERIC_DUMMY_FRAMES
+ && PC_IN_CALL_DUMMY (frame->pc, 0, 0))
+ {
+ LONGEST tmp;
+ frame_unwind_signed_register (frame, PC_REGNUM, &tmp);
+ saved_pc = tmp;
+ }
+ else if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
saved_pc = read_memory_integer (frame->frame - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE);
else
saved_pc = read_next_frame_reg (frame, pcreg);
static mips_extra_func_info_t
heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame)
+ struct frame_info *next_frame, int cur_frame)
{
- CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
+ CORE_ADDR sp;
+
+ if (cur_frame)
+ sp = read_next_frame_reg (next_frame, SP_REGNUM);
+ else
+ sp = 0;
if (start_pc == 0)
return NULL;
return &temp_proc_desc;
}
+struct mips_objfile_private
+{
+ bfd_size_type size;
+ char *contents;
+};
+
+/* Global used to communicate between non_heuristic_proc_desc and
+ compare_pdr_entries within qsort (). */
+static bfd *the_bfd;
+
+static int
+compare_pdr_entries (const void *a, const void *b)
+{
+ CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a);
+ CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b);
+
+ if (lhs < rhs)
+ return -1;
+ else if (lhs == rhs)
+ return 0;
+ else
+ return 1;
+}
+
static mips_extra_func_info_t
non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
{
mips_extra_func_info_t proc_desc;
struct block *b = block_for_pc (pc);
struct symbol *sym;
+ struct obj_section *sec;
+ struct mips_objfile_private *priv;
+
+ if (PC_IN_CALL_DUMMY (pc, 0, 0))
+ return NULL;
find_pc_partial_function (pc, NULL, &startaddr, NULL);
if (addrptr)
*addrptr = startaddr;
- if (b == NULL || PC_IN_CALL_DUMMY (pc, 0, 0))
- sym = NULL;
- else
+
+ priv = NULL;
+
+ sec = find_pc_section (pc);
+ if (sec != NULL)
{
- if (startaddr > BLOCK_START (b))
- /* This is the "pathological" case referred to in a comment in
- print_frame_info. It might be better to move this check into
- symbol reading. */
- sym = NULL;
- else
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
+ priv = (struct mips_objfile_private *) sec->objfile->obj_private;
+
+ /* Search the ".pdr" section generated by GAS. This includes most of
+ the information normally found in ECOFF PDRs. */
+
+ the_bfd = sec->objfile->obfd;
+ if (priv == NULL
+ && (the_bfd->format == bfd_object
+ && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour
+ && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64))
+ {
+ /* Right now GAS only outputs the address as a four-byte sequence.
+ This means that we should not bother with this method on 64-bit
+ targets (until that is fixed). */
+
+ priv = obstack_alloc (& sec->objfile->psymbol_obstack,
+ sizeof (struct mips_objfile_private));
+ priv->size = 0;
+ sec->objfile->obj_private = priv;
+ }
+ else if (priv == NULL)
+ {
+ asection *bfdsec;
+
+ priv = obstack_alloc (& sec->objfile->psymbol_obstack,
+ sizeof (struct mips_objfile_private));
+
+ bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
+ if (bfdsec != NULL)
+ {
+ priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
+ priv->contents = obstack_alloc (& sec->objfile->psymbol_obstack,
+ priv->size);
+ bfd_get_section_contents (sec->objfile->obfd, bfdsec,
+ priv->contents, 0, priv->size);
+
+ /* In general, the .pdr section is sorted. However, in the
+ presence of multiple code sections (and other corner cases)
+ it can become unsorted. Sort it so that we can use a faster
+ binary search. */
+ qsort (priv->contents, priv->size / 32, 32, compare_pdr_entries);
+ }
+ else
+ priv->size = 0;
+
+ sec->objfile->obj_private = priv;
+ }
+ the_bfd = NULL;
+
+ if (priv->size != 0)
+ {
+ int low, mid, high;
+ char *ptr;
+
+ low = 0;
+ high = priv->size / 32;
+
+ do
+ {
+ CORE_ADDR pdr_pc;
+
+ mid = (low + high) / 2;
+
+ ptr = priv->contents + mid * 32;
+ pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
+ pdr_pc += ANOFFSET (sec->objfile->section_offsets,
+ SECT_OFF_TEXT (sec->objfile));
+ if (pdr_pc == startaddr)
+ break;
+ if (pdr_pc > startaddr)
+ high = mid;
+ else
+ low = mid + 1;
+ }
+ while (low != high);
+
+ if (low != high)
+ {
+ struct symbol *sym = find_pc_function (pc);
+
+ /* Fill in what we need of the proc_desc. */
+ proc_desc = (mips_extra_func_info_t)
+ obstack_alloc (&sec->objfile->psymbol_obstack,
+ sizeof (struct mips_extra_func_info));
+ PROC_LOW_ADDR (proc_desc) = startaddr;
+
+ /* Only used for dummy frames. */
+ PROC_HIGH_ADDR (proc_desc) = 0;
+
+ PROC_FRAME_OFFSET (proc_desc)
+ = bfd_get_32 (sec->objfile->obfd, ptr + 20);
+ PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 24);
+ PROC_FRAME_ADJUST (proc_desc) = 0;
+ PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 4);
+ PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 12);
+ PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 8);
+ PROC_FREG_OFFSET (proc_desc)
+ = bfd_get_32 (sec->objfile->obfd, ptr + 16);
+ PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 28);
+ proc_desc->pdr.isym = (long) sym;
+
+ return proc_desc;
+ }
+ }
+ }
+
+ if (b == NULL)
+ return NULL;
+
+ if (startaddr > BLOCK_START (b))
+ {
+ /* This is the "pathological" case referred to in a comment in
+ print_frame_info. It might be better to move this check into
+ symbol reading. */
+ return NULL;
}
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
+
/* If we never found a PDR for this function in symbol reading, then
examine prologues to find the information. */
if (sym)
static mips_extra_func_info_t
-find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame)
+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame)
{
mips_extra_func_info_t proc_desc;
- CORE_ADDR startaddr;
+ CORE_ADDR startaddr = 0;
proc_desc = non_heuristic_proc_desc (pc, &startaddr);
{
struct symtab_and_line val;
struct symbol *proc_symbol =
- PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
+ PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
if (proc_symbol)
{
if (!proc_symbol || pc < val.pc)
{
mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
- pc, next_frame);
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ pc, next_frame, cur_frame);
if (found_heuristic)
proc_desc = found_heuristic;
}
startaddr = heuristic_proc_start (pc);
proc_desc =
- heuristic_proc_desc (startaddr, pc, next_frame);
+ heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
}
return proc_desc;
}
get_frame_pointer (struct frame_info *frame,
mips_extra_func_info_t proc_desc)
{
- return ADDR_BITS_REMOVE (
- read_next_frame_reg (frame, PROC_FRAME_REG (proc_desc)) +
- PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+ return ADDR_BITS_REMOVE (read_next_frame_reg (frame,
+ PROC_FRAME_REG (proc_desc)) +
+ PROC_FRAME_OFFSET (proc_desc) -
+ PROC_FRAME_ADJUST (proc_desc));
}
-mips_extra_func_info_t cached_proc_desc;
+static mips_extra_func_info_t cached_proc_desc;
-CORE_ADDR
+static CORE_ADDR
mips_frame_chain (struct frame_info *frame)
{
mips_extra_func_info_t proc_desc;
/* Check if the PC is inside a call stub. If it is, fetch the
PC of the caller of that stub. */
- if ((tmp = mips_skip_stub (saved_pc)) != 0)
+ if ((tmp = SKIP_TRAMPOLINE_CODE (saved_pc)) != 0)
saved_pc = tmp;
+ if (USE_GENERIC_DUMMY_FRAMES
+ && PC_IN_CALL_DUMMY (saved_pc, 0, 0))
+ {
+ /* A dummy frame, uses SP not FP. Get the old SP value. If all
+ is well, frame->frame the bottom of the current frame will
+ contain that value. */
+ return frame->frame;
+ }
+
/* Look up the procedure descriptor for this PC. */
- proc_desc = find_proc_desc (saved_pc, frame);
+ proc_desc = find_proc_desc (saved_pc, frame, 1);
if (!proc_desc)
return 0;
we loop forever if we see a zero size frame. */
if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
- && !frame->signal_handler_caller)
+ /* The previous frame from a sigtramp frame might be frameless
+ and have frame size zero. */
+ && !frame->signal_handler_caller
+ /* For a generic dummy frame, let get_frame_pointer() unwind a
+ register value saved as part of the dummy frame call. */
+ && !(USE_GENERIC_DUMMY_FRAMES
+ && PC_IN_CALL_DUMMY (frame->pc, 0, 0)))
return 0;
else
return get_frame_pointer (frame, proc_desc);
}
-void
+static void
mips_init_extra_frame_info (int fromleaf, struct frame_info *fci)
{
int regnum;
/* Use proc_desc calculated in frame_chain */
mips_extra_func_info_t proc_desc =
- fci->next ? cached_proc_desc : find_proc_desc (fci->pc, fci->next);
+ fci->next ? cached_proc_desc : find_proc_desc (fci->pc, fci->next, 1);
fci->extra_info = (struct frame_extra_info *)
frame_obstack_alloc (sizeof (struct frame_extra_info));
if (fci->pc == PROC_LOW_ADDR (proc_desc)
&& !PROC_DESC_IS_DUMMY (proc_desc))
fci->frame = read_next_frame_reg (fci->next, SP_REGNUM);
+ else if (USE_GENERIC_DUMMY_FRAMES
+ && PC_IN_CALL_DUMMY (fci->pc, 0, 0))
+ /* Do not ``fix'' fci->frame. It will have the value of the
+ generic dummy frame's top-of-stack (since the draft
+ fci->frame is obtained by returning the unwound stack
+ pointer) and that is what we want. That way the fci->frame
+ value will match the top-of-stack value that was saved as
+ part of the dummy frames data. */
+ /* Do nothing. */;
else
fci->frame = get_frame_pointer (fci->next, proc_desc);
We can't use fci->signal_handler_caller, it is not yet set. */
find_pc_partial_function (fci->pc, &name,
(CORE_ADDR *) NULL, (CORE_ADDR *) NULL);
- if (!IN_SIGTRAMP (fci->pc, name))
+ if (!PC_IN_SIGTRAMP (fci->pc, name))
{
frame_saved_regs_zalloc (fci);
memcpy (fci->saved_regs, temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
fci->saved_regs[PC_REGNUM]
= fci->saved_regs[RA_REGNUM];
+ /* Set value of previous frame's stack pointer. Remember that
+ saved_regs[SP_REGNUM] is special in that it contains the
+ value of the stack pointer register. The other saved_regs
+ values are addresses (in the inferior) at which a given
+ register's value may be found. */
+ fci->saved_regs[SP_REGNUM] = fci->frame;
}
}
we basically have to look at symbol information for the function
that we stopped in, which tells us *which* register (if any) is
the base of the frame pointer, and what offset from that register
- the frame itself is at.
+ the frame itself is at.
This presents a problem when trying to examine a stack in memory
(that isn't executing at the moment), using the "frame" command. We
&& (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
&& TYPE_NFIELDS (arg_type) == 1
&& TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
- && MIPS_FPU_TYPE != MIPS_FPU_NONE);
+ && MIPS_FPU_TYPE != MIPS_FPU_NONE);
}
-CORE_ADDR
-mips_push_arguments (int nargs,
- value_ptr *args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+/* On o32, argument passing in GPRs depends on the alignment of the type being
+ passed. Return 1 if this type must be aligned to a doubleword boundary. */
+
+static int
+mips_type_needs_double_align (struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (type);
+
+ if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
+ return 1;
+ else if (typecode == TYPE_CODE_STRUCT)
+ {
+ if (TYPE_NFIELDS (type) < 1)
+ return 0;
+ return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
+ }
+ else if (typecode == TYPE_CODE_UNION)
+ {
+ int i, n;
+
+ n = TYPE_NFIELDS (type);
+ for (i = 0; i < n; i++)
+ if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
+ return 1;
+ return 0;
+ }
+ return 0;
+}
+
+/* Macros to round N up or down to the next A boundary;
+ A must be a power of two. */
+
+#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
+#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
+
+/* Adjust the address downward (direction of stack growth) so that it
+ is correctly aligned for a new stack frame. */
+static CORE_ADDR
+mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return ROUND_DOWN (addr, 16);
+}
+
+static CORE_ADDR
+mips_eabi_push_arguments (int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
- /* Macros to round N up or down to the next A boundary; A must be
- a power of two. */
-#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
-#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
-
/* First ensure that the stack and structure return address (if any)
- are properly aligned. The stack has to be at least 64-bit aligned
- even on 32-bit machines, because doubles must be 64-bit aligned.
- On at least one MIPS variant, stack frames need to be 128-bit
- aligned, so we round to this widest known alignment. */
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+
sp = ROUND_DOWN (sp, 16);
struct_addr = ROUND_DOWN (struct_addr, 16);
- /* Now make space on the stack for the args. We allocate more
+ /* Now make space on the stack for the args. We allocate more
than necessary for EABI, because the first few arguments are
- passed in registers, but that's OK. */
+ passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), MIPS_STACK_ARGSIZE);
+ len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ MIPS_STACK_ARGSIZE);
sp -= ROUND_UP (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, "mips_push_arguments: sp=0x%lx allocated %d\n",
- (long) sp, ROUND_UP (len, 16));
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_eabi_push_arguments: sp=0x%s allocated %d\n",
+ paddr_nz (sp), ROUND_UP (len, 16));
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
float_argreg = FPA0_REGNUM;
- /* the struct_return pointer occupies the first parameter-passing reg */
+ /* The struct_return pointer occupies the first parameter-passing reg. */
if (struct_return)
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_push_arguments: struct_return reg=%d 0x%lx\n",
- argreg, (long) struct_addr);
+ "mips_eabi_push_arguments: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
- if (MIPS_REGS_HAVE_HOME_P)
- stack_offset += MIPS_STACK_ARGSIZE;
}
/* Now load as many as possible of the first arguments into
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char valbuf[MAX_REGISTER_RAW_SIZE];
- value_ptr arg = args[argnum];
+ char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_push_arguments: %d len=%d type=%d",
+ "mips_eabi_push_arguments: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
/* The EABI passes structures that do not fit in a register by
- reference. In all other cases, pass the structure by value. */
- if (MIPS_EABI
- && len > MIPS_SAVED_REGSIZE
+ reference. */
+ if (len > MIPS_SAVED_REGSIZE
&& (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
store_address (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
up before the check to see if there are any FP registers
- left. Non MIPS_EABI targets also pass the FP in the integer
- registers so also round up normal registers. */
+ left. Non MIPS_EABI targets also pass the FP in the integer
+ registers so also round up normal registers. */
if (!FP_REGISTER_DOUBLE
&& fp_register_arg_p (typecode, arg_type))
{
don't use float registers for arguments. This duplication of
arguments in general registers can't hurt non-MIPS16 functions
because those registers are normally skipped. */
- /* MIPS_EABI squeeses a struct that contains a single floating
- point value into an FP register instead of pusing it onto the
- stack. */
+ /* MIPS_EABI squeezes a struct that contains a single floating
+ point value into an FP register instead of pushing it onto the
+ stack. */
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
if (!FP_REGISTER_DOUBLE && len == 8)
{
- int low_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
+ int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
/* Write the low word of the double to the even register(s). */
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
- if (!MIPS_EABI)
- {
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
- }
/* Write the high word of the double to the odd register(s). */
regval = extract_unsigned_integer (val + 4 - low_offset, 4);
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
- if (!MIPS_EABI)
- {
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
- }
-
}
else
{
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
- if (!MIPS_EABI)
- {
- /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, len));
- write_register (argreg, regval);
- argreg += FP_REGISTER_DOUBLE ? 1 : 2;
- }
}
- /* Reserve space for the FP register. */
- if (MIPS_REGS_HAVE_HOME_P)
- stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
}
else
{
compatibility, we will put them in both places. */
int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
(len % MIPS_SAVED_REGSIZE != 0));
+
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
- /* Rememer if the argument was written to the stack. */
+ /* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+ int partial_len =
+ len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
int longword_offset = 0;
CORE_ADDR addr;
stack_used_p = 1;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (MIPS_STACK_ARGSIZE == 8 &&
(typecode == TYPE_CODE_INT ||
if (mips_debug)
{
- fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%lx",
- (long) stack_offset);
- fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%lx",
- (long) longword_offset);
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
+ paddr_nz (stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
+ paddr_nz (longword_offset));
}
-
+
addr = sp + stack_offset + longword_offset;
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%lx ", (long) addr);
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x", val[i] & 0xff);
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
}
}
write_memory (addr, val, partial_len);
/* Note!!! This is NOT an else clause. Odd sized
structs may go thru BOTH paths. Floating point
- arguments will not. */
+ arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
LONGEST regval = extract_unsigned_integer (val, partial_len);
- /* A non-floating-point argument being passed in a
- general register. If a struct or union, and if
- the remaining length is smaller than the register
- size, we have to adjust the register value on
- big endian targets.
-
- It does not seem to be necessary to do the
- same for integral types.
-
- Also don't do this adjustment on EABI and O64
- binaries. */
-
- if (!MIPS_EABI
- && MIPS_SAVED_REGSIZE < 8
- && TARGET_BYTE_ORDER == BIG_ENDIAN
- && partial_len < MIPS_SAVED_REGSIZE
- && (typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
- TARGET_CHAR_BIT);
-
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
phex (regval, MIPS_SAVED_REGSIZE));
write_register (argreg, regval);
argreg++;
-
- /* If this is the old ABI, prevent subsequent floating
- point arguments from being passed in floating point
- registers. */
- if (!MIPS_EABI)
- float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
}
len -= partial_len;
/* Compute the the offset into the stack at which we
will copy the next parameter.
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated.
-
In the new EABI (and the NABI32), the stack_offset
- only needs to be adjusted when it has been used.. */
+ only needs to be adjusted when it has been used. */
- if (MIPS_REGS_HAVE_HOME_P || stack_used_p)
+ if (stack_used_p)
stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
}
}
return sp;
}
-CORE_ADDR
-mips_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
-{
- /* Set the return address register to point to the entry
- point of the program, where a breakpoint lies in wait. */
- write_register (RA_REGNUM, CALL_DUMMY_ADDRESS ());
- return sp;
-}
+/* N32/N64 version of push_arguments. */
-static void
-mips_push_register (CORE_ADDR * sp, int regno)
+static CORE_ADDR
+mips_n32n64_push_arguments (int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
{
- char buffer[MAX_REGISTER_RAW_SIZE];
- int regsize;
- int offset;
- if (MIPS_SAVED_REGSIZE < REGISTER_RAW_SIZE (regno))
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+
+ sp = ROUND_DOWN (sp, 16);
+ struct_addr = ROUND_DOWN (struct_addr, 16);
+
+ /* Now make space on the stack for the args. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ MIPS_STACK_ARGSIZE);
+ sp -= ROUND_UP (len, 16);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_n32n64_push_arguments: sp=0x%s allocated %d\n",
+ paddr_nz (sp), ROUND_UP (len, 16));
+
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = FPA0_REGNUM;
+
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
{
- regsize = MIPS_SAVED_REGSIZE;
- offset = (TARGET_BYTE_ORDER == BIG_ENDIAN
- ? REGISTER_RAW_SIZE (regno) - MIPS_SAVED_REGSIZE
- : 0);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_n32n64_push_arguments: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
+ write_register (argreg++, struct_addr);
}
- else
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
{
- regsize = REGISTER_RAW_SIZE (regno);
- offset = 0;
- }
- *sp -= regsize;
- read_register_gen (regno, buffer);
- write_memory (*sp, buffer + offset, regsize);
-}
+ char *val;
+ char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
-/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
-#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_n32n64_push_arguments: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
-void
-mips_push_dummy_frame (void)
-{
- int ireg;
- struct linked_proc_info *link = (struct linked_proc_info *)
- xmalloc (sizeof (struct linked_proc_info));
- mips_extra_func_info_t proc_desc = &link->info;
- CORE_ADDR sp = ADDR_BITS_REMOVE (read_signed_register (SP_REGNUM));
- CORE_ADDR old_sp = sp;
- link->next = linked_proc_desc_table;
- linked_proc_desc_table = link;
+ val = (char *) VALUE_CONTENTS (arg);
-/* FIXME! are these correct ? */
-#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
-#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
-#define FLOAT_REG_SAVE_MASK MASK(0,19)
-#define FLOAT_SINGLE_REG_SAVE_MASK \
- ((1<<18)|(1<<16)|(1<<14)|(1<<12)|(1<<10)|(1<<8)|(1<<6)|(1<<4)|(1<<2)|(1<<0))
- /*
- * The registers we must save are all those not preserved across
- * procedure calls. Dest_Reg (see tm-mips.h) must also be saved.
- * In addition, we must save the PC, PUSH_FP_REGNUM, MMLO/-HI
- * and FP Control/Status registers.
- *
- *
- * Dummy frame layout:
- * (high memory)
- * Saved PC
- * Saved MMHI, MMLO, FPC_CSR
- * Saved R31
- * Saved R28
- * ...
- * Saved R1
- * Saved D18 (i.e. F19, F18)
- * ...
- * Saved D0 (i.e. F1, F0)
- * Argument build area and stack arguments written via mips_push_arguments
- * (low memory)
- */
+ if (fp_register_arg_p (typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ write_register (float_argreg++, regval);
- /* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ write_register (argreg, regval);
+ argreg += 1;
+ }
+ else
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of MIPS_REGSIZE
+ are treated specially: Irix cc passes them in registers
+ where gcc sometimes puts them on the stack. For maximum
+ compatibility, we will put them in both places. */
+ int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
+ (len % MIPS_SAVED_REGSIZE != 0));
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
+ while (len > 0)
+ {
+ /* Rememer if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len = len < MIPS_SAVED_REGSIZE ?
+ len : MIPS_SAVED_REGSIZE;
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
+
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM
+ || odd_sized_struct
+ || fp_register_arg_p (typecode, arg_type))
+ {
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+ int longword_offset = 0;
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ if (MIPS_STACK_ARGSIZE == 8 &&
+ (typecode == TYPE_CODE_INT ||
+ typecode == TYPE_CODE_PTR ||
+ typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = MIPS_STACK_ARGSIZE - len;
+ }
+
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
+ paddr_nz (stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
+ paddr_nz (longword_offset));
+ }
+
+ addr = sp + stack_offset + longword_offset;
+
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ paddr_nz (addr));
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
+ }
+
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM
+ && !fp_register_arg_p (typecode, arg_type))
+ {
+ LONGEST regval = extract_unsigned_integer (val, partial_len);
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
+
+ It does not seem to be necessary to do the
+ same for integral types.
+
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ MIPS_SAVED_REGSIZE, generates a left shift as
+ part of storing the argument in a register a
+ register (the left shift isn't generated when
+ sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
+ is quite possible that this is GCC contradicting
+ the LE/O32 ABI, GDB has not been adjusted to
+ accommodate this. Either someone needs to
+ demonstrate that the LE/O32 ABI specifies such a
+ left shift OR this new ABI gets identified as
+ such and GDB gets tweaked accordingly. */
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && partial_len < MIPS_SAVED_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
+ TARGET_CHAR_BIT);
+
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval, MIPS_SAVED_REGSIZE));
+ write_register (argreg, regval);
+ argreg++;
+ }
+
+ len -= partial_len;
+ val += partial_len;
+
+ /* Compute the the offset into the stack at which we
+ will copy the next parameter.
+
+ In N32 (N64?), the stack_offset only needs to be
+ adjusted when it has been used. */
+
+ if (stack_used_p)
+ stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ }
+ }
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
+ }
+
+ /* Return adjusted stack pointer. */
+ return sp;
+}
+
+/* O32 version of push_arguments. */
+
+static CORE_ADDR
+mips_o32_push_arguments (int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
+{
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+
+ sp = ROUND_DOWN (sp, 16);
+ struct_addr = ROUND_DOWN (struct_addr, 16);
+
+ /* Now make space on the stack for the args. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ MIPS_STACK_ARGSIZE);
+ sp -= ROUND_UP (len, 16);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_arguments: sp=0x%s allocated %d\n",
+ paddr_nz (sp), ROUND_UP (len, 16));
+
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = FPA0_REGNUM;
+
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_arguments: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
+ write_register (argreg++, struct_addr);
+ stack_offset += MIPS_STACK_ARGSIZE;
+ }
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ char *val;
+ char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_arguments: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
+
+ val = (char *) VALUE_CONTENTS (arg);
+
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. O32/O64 targets also pass the FP in the integer
+ registers so also round up normal registers. */
+ if (!FP_REGISTER_DOUBLE
+ && fp_register_arg_p (typecode, arg_type))
+ {
+ if ((float_argreg & 1))
+ float_argreg++;
+ }
+
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On O32/O64, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+
+ if (fp_register_arg_p (typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
+ {
+ if (!FP_REGISTER_DOUBLE && len == 8)
+ {
+ int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ unsigned long regval;
+
+ /* Write the low word of the double to the even register(s). */
+ regval = extract_unsigned_integer (val + low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+
+ /* Write the high word of the double to the odd register(s). */
+ regval = extract_unsigned_integer (val + 4 - low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+ }
+ else
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ write_register (float_argreg++, regval);
+ /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ write_register (argreg, regval);
+ argreg += FP_REGISTER_DOUBLE ? 1 : 2;
+ }
+ /* Reserve space for the FP register. */
+ stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
+ }
+ else
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of MIPS_REGSIZE
+ are treated specially: Irix cc passes them in registers
+ where gcc sometimes puts them on the stack. For maximum
+ compatibility, we will put them in both places. */
+ int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
+ (len % MIPS_SAVED_REGSIZE != 0));
+ /* Structures should be aligned to eight bytes (even arg registers)
+ on MIPS_ABI_O32, if their first member has double precision. */
+ if (MIPS_SAVED_REGSIZE < 8
+ && mips_type_needs_double_align (arg_type))
+ {
+ if ((argreg & 1))
+ argreg++;
+ }
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
+ while (len > 0)
+ {
+ /* Remember if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len =
+ len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
+
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM
+ || odd_sized_struct
+ || fp_register_arg_p (typecode, arg_type))
+ {
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+ int longword_offset = 0;
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ if (MIPS_STACK_ARGSIZE == 8 &&
+ (typecode == TYPE_CODE_INT ||
+ typecode == TYPE_CODE_PTR ||
+ typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = MIPS_STACK_ARGSIZE - len;
+ }
+
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
+ paddr_nz (stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
+ paddr_nz (longword_offset));
+ }
+
+ addr = sp + stack_offset + longword_offset;
+
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ paddr_nz (addr));
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
+ }
+
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM
+ && !fp_register_arg_p (typecode, arg_type))
+ {
+ LONGEST regval = extract_signed_integer (val, partial_len);
+ /* Value may need to be sign extended, because
+ MIPS_REGSIZE != MIPS_SAVED_REGSIZE. */
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
+
+ It does not seem to be necessary to do the
+ same for integral types.
+
+ Also don't do this adjustment on O64 binaries.
+
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ MIPS_SAVED_REGSIZE, generates a left shift as
+ part of storing the argument in a register a
+ register (the left shift isn't generated when
+ sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
+ is quite possible that this is GCC contradicting
+ the LE/O32 ABI, GDB has not been adjusted to
+ accommodate this. Either someone needs to
+ demonstrate that the LE/O32 ABI specifies such a
+ left shift OR this new ABI gets identified as
+ such and GDB gets tweaked accordingly. */
+
+ if (MIPS_SAVED_REGSIZE < 8
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && partial_len < MIPS_SAVED_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
+ TARGET_CHAR_BIT);
+
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval, MIPS_SAVED_REGSIZE));
+ write_register (argreg, regval);
+ argreg++;
+
+ /* Prevent subsequent floating point arguments from
+ being passed in floating point registers. */
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
+ }
+
+ len -= partial_len;
+ val += partial_len;
+
+ /* Compute the the offset into the stack at which we
+ will copy the next parameter.
+
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
+
+ stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ }
+ }
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
+ }
+
+ /* Return adjusted stack pointer. */
+ return sp;
+}
+
+/* O64 version of push_arguments. */
+
+static CORE_ADDR
+mips_o64_push_arguments (int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
+{
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+
+ sp = ROUND_DOWN (sp, 16);
+ struct_addr = ROUND_DOWN (struct_addr, 16);
+
+ /* Now make space on the stack for the args. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ MIPS_STACK_ARGSIZE);
+ sp -= ROUND_UP (len, 16);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_arguments: sp=0x%s allocated %d\n",
+ paddr_nz (sp), ROUND_UP (len, 16));
+
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = FPA0_REGNUM;
+
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_arguments: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
+ write_register (argreg++, struct_addr);
+ stack_offset += MIPS_STACK_ARGSIZE;
+ }
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ char *val;
+ char *valbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_arguments: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
+
+ val = (char *) VALUE_CONTENTS (arg);
+
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. O32/O64 targets also pass the FP in the integer
+ registers so also round up normal registers. */
+ if (!FP_REGISTER_DOUBLE
+ && fp_register_arg_p (typecode, arg_type))
+ {
+ if ((float_argreg & 1))
+ float_argreg++;
+ }
+
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On O32/O64, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+
+ if (fp_register_arg_p (typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
+ {
+ if (!FP_REGISTER_DOUBLE && len == 8)
+ {
+ int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ unsigned long regval;
+
+ /* Write the low word of the double to the even register(s). */
+ regval = extract_unsigned_integer (val + low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+
+ /* Write the high word of the double to the odd register(s). */
+ regval = extract_unsigned_integer (val + 4 - low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+ }
+ else
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ write_register (float_argreg++, regval);
+ /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ write_register (argreg, regval);
+ argreg += FP_REGISTER_DOUBLE ? 1 : 2;
+ }
+ /* Reserve space for the FP register. */
+ stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
+ }
+ else
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of MIPS_REGSIZE
+ are treated specially: Irix cc passes them in registers
+ where gcc sometimes puts them on the stack. For maximum
+ compatibility, we will put them in both places. */
+ int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
+ (len % MIPS_SAVED_REGSIZE != 0));
+ /* Structures should be aligned to eight bytes (even arg registers)
+ on MIPS_ABI_O32, if their first member has double precision. */
+ if (MIPS_SAVED_REGSIZE < 8
+ && mips_type_needs_double_align (arg_type))
+ {
+ if ((argreg & 1))
+ argreg++;
+ }
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
+ while (len > 0)
+ {
+ /* Remember if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len =
+ len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
+
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM
+ || odd_sized_struct
+ || fp_register_arg_p (typecode, arg_type))
+ {
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+ int longword_offset = 0;
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ if (MIPS_STACK_ARGSIZE == 8 &&
+ (typecode == TYPE_CODE_INT ||
+ typecode == TYPE_CODE_PTR ||
+ typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = MIPS_STACK_ARGSIZE - len;
+ }
+
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
+ paddr_nz (stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
+ paddr_nz (longword_offset));
+ }
+
+ addr = sp + stack_offset + longword_offset;
+
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ paddr_nz (addr));
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
+ }
+
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM
+ && !fp_register_arg_p (typecode, arg_type))
+ {
+ LONGEST regval = extract_signed_integer (val, partial_len);
+ /* Value may need to be sign extended, because
+ MIPS_REGSIZE != MIPS_SAVED_REGSIZE. */
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
+
+ It does not seem to be necessary to do the
+ same for integral types.
+
+ Also don't do this adjustment on O64 binaries.
+
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ MIPS_SAVED_REGSIZE, generates a left shift as
+ part of storing the argument in a register a
+ register (the left shift isn't generated when
+ sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
+ is quite possible that this is GCC contradicting
+ the LE/O32 ABI, GDB has not been adjusted to
+ accommodate this. Either someone needs to
+ demonstrate that the LE/O32 ABI specifies such a
+ left shift OR this new ABI gets identified as
+ such and GDB gets tweaked accordingly. */
+
+ if (MIPS_SAVED_REGSIZE < 8
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && partial_len < MIPS_SAVED_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
+ TARGET_CHAR_BIT);
+
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval, MIPS_SAVED_REGSIZE));
+ write_register (argreg, regval);
+ argreg++;
+
+ /* Prevent subsequent floating point arguments from
+ being passed in floating point registers. */
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
+ }
+
+ len -= partial_len;
+ val += partial_len;
+
+ /* Compute the the offset into the stack at which we
+ will copy the next parameter.
+
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
+
+ stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
+ }
+ }
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
+ }
+
+ /* Return adjusted stack pointer. */
+ return sp;
+}
+
+static CORE_ADDR
+mips_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+{
+ /* Set the return address register to point to the entry
+ point of the program, where a breakpoint lies in wait. */
+ write_register (RA_REGNUM, CALL_DUMMY_ADDRESS ());
+ return sp;
+}
+
+static void
+mips_push_register (CORE_ADDR * sp, int regno)
+{
+ char *buffer = alloca (MAX_REGISTER_RAW_SIZE);
+ int regsize;
+ int offset;
+ if (MIPS_SAVED_REGSIZE < REGISTER_RAW_SIZE (regno))
+ {
+ regsize = MIPS_SAVED_REGSIZE;
+ offset = (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ ? REGISTER_RAW_SIZE (regno) - MIPS_SAVED_REGSIZE
+ : 0);
+ }
+ else
+ {
+ regsize = REGISTER_RAW_SIZE (regno);
+ offset = 0;
+ }
+ *sp -= regsize;
+ read_register_gen (regno, buffer);
+ write_memory (*sp, buffer + offset, regsize);
+}
+
+/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
+#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
+
+static void
+mips_push_dummy_frame (void)
+{
+ int ireg;
+ struct linked_proc_info *link = (struct linked_proc_info *)
+ xmalloc (sizeof (struct linked_proc_info));
+ mips_extra_func_info_t proc_desc = &link->info;
+ CORE_ADDR sp = ADDR_BITS_REMOVE (read_signed_register (SP_REGNUM));
+ CORE_ADDR old_sp = sp;
+ link->next = linked_proc_desc_table;
+ linked_proc_desc_table = link;
+
+/* FIXME! are these correct ? */
+#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
+#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
+#define FLOAT_REG_SAVE_MASK MASK(0,19)
+#define FLOAT_SINGLE_REG_SAVE_MASK \
+ ((1<<18)|(1<<16)|(1<<14)|(1<<12)|(1<<10)|(1<<8)|(1<<6)|(1<<4)|(1<<2)|(1<<0))
+ /*
+ * The registers we must save are all those not preserved across
+ * procedure calls. Dest_Reg (see tm-mips.h) must also be saved.
+ * In addition, we must save the PC, PUSH_FP_REGNUM, MMLO/-HI
+ * and FP Control/Status registers.
+ *
+ *
+ * Dummy frame layout:
+ * (high memory)
+ * Saved PC
+ * Saved MMHI, MMLO, FPC_CSR
+ * Saved R31
+ * Saved R28
+ * ...
+ * Saved R1
+ * Saved D18 (i.e. F19, F18)
+ * ...
+ * Saved D0 (i.e. F1, F0)
+ * Argument build area and stack arguments written via mips_push_arguments
+ * (low memory)
+ */
+
+ /* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
PROC_FRAME_REG (proc_desc) = PUSH_FP_REGNUM;
PROC_FRAME_OFFSET (proc_desc) = 0;
PROC_FRAME_ADJUST (proc_desc) = 0;
PROC_PC_REG (proc_desc) = RA_REGNUM;
}
-void
+static void
mips_pop_frame (void)
{
register int regnum;
struct frame_info *frame = get_current_frame ();
CORE_ADDR new_sp = FRAME_FP (frame);
-
mips_extra_func_info_t proc_desc = frame->extra_info->proc_desc;
+ if (USE_GENERIC_DUMMY_FRAMES
+ && PC_IN_CALL_DUMMY (frame->pc, 0, 0))
+ {
+ generic_pop_dummy_frame ();
+ flush_cached_frames ();
+ return;
+ }
+
write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
if (frame->saved_regs == NULL)
- mips_find_saved_regs (frame);
+ FRAME_INIT_SAVED_REGS (frame);
for (regnum = 0; regnum < NUM_REGS; regnum++)
- {
- if (regnum != SP_REGNUM && regnum != PC_REGNUM
- && frame->saved_regs[regnum])
- write_register (regnum,
- read_memory_integer (frame->saved_regs[regnum],
- MIPS_SAVED_REGSIZE));
- }
+ if (regnum != SP_REGNUM && regnum != PC_REGNUM
+ && frame->saved_regs[regnum])
+ {
+ /* Floating point registers must not be sign extended,
+ in case MIPS_SAVED_REGSIZE = 4 but sizeof (FP0_REGNUM) == 8. */
+
+ if (FP0_REGNUM <= regnum && regnum < FP0_REGNUM + 32)
+ write_register (regnum,
+ read_memory_unsigned_integer (frame->saved_regs[regnum],
+ MIPS_SAVED_REGSIZE));
+ else
+ write_register (regnum,
+ read_memory_integer (frame->saved_regs[regnum],
+ MIPS_SAVED_REGSIZE));
+ }
+
write_register (SP_REGNUM, new_sp);
flush_cached_frames ();
else
linked_proc_desc_table = pi_ptr->next;
- free (pi_ptr);
+ xfree (pi_ptr);
write_register (HI_REGNUM,
read_memory_integer (new_sp - 2 * MIPS_SAVED_REGSIZE,
}
}
+static void
+mips_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
+ struct value **args, struct type *type, int gcc_p)
+{
+ write_register(T9_REGNUM, fun);
+}
+
+/* Floating point register management.
+
+ Background: MIPS1 & 2 fp registers are 32 bits wide. To support
+ 64bit operations, these early MIPS cpus treat fp register pairs
+ (f0,f1) as a single register (d0). Later MIPS cpu's have 64 bit fp
+ registers and offer a compatibility mode that emulates the MIPS2 fp
+ model. When operating in MIPS2 fp compat mode, later cpu's split
+ double precision floats into two 32-bit chunks and store them in
+ consecutive fp regs. To display 64-bit floats stored in this
+ fashion, we have to combine 32 bits from f0 and 32 bits from f1.
+ Throw in user-configurable endianness and you have a real mess.
+
+ The way this works is:
+ - If we are in 32-bit mode or on a 32-bit processor, then a 64-bit
+ double-precision value will be split across two logical registers.
+ The lower-numbered logical register will hold the low-order bits,
+ regardless of the processor's endianness.
+ - If we are on a 64-bit processor, and we are looking for a
+ single-precision value, it will be in the low ordered bits
+ of a 64-bit GPR (after mfc1, for example) or a 64-bit register
+ save slot in memory.
+ - If we are in 64-bit mode, everything is straightforward.
+
+ Note that this code only deals with "live" registers at the top of the
+ stack. We will attempt to deal with saved registers later, when
+ the raw/cooked register interface is in place. (We need a general
+ interface that can deal with dynamic saved register sizes -- fp
+ regs could be 32 bits wide in one frame and 64 on the frame above
+ and below). */
+
+static struct type *
+mips_float_register_type (void)
+{
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ return builtin_type_ieee_single_big;
+ else
+ return builtin_type_ieee_single_little;
+}
+
+static struct type *
+mips_double_register_type (void)
+{
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ return builtin_type_ieee_double_big;
+ else
+ return builtin_type_ieee_double_little;
+}
+
+/* Copy a 32-bit single-precision value from the current frame
+ into rare_buffer. */
+
+static void
+mips_read_fp_register_single (int regno, char *rare_buffer)
+{
+ int raw_size = REGISTER_RAW_SIZE (regno);
+ char *raw_buffer = alloca (raw_size);
+
+ if (!frame_register_read (selected_frame, regno, raw_buffer))
+ error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ if (raw_size == 8)
+ {
+ /* We have a 64-bit value for this register. Find the low-order
+ 32 bits. */
+ int offset;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ offset = 4;
+ else
+ offset = 0;
+
+ memcpy (rare_buffer, raw_buffer + offset, 4);
+ }
+ else
+ {
+ memcpy (rare_buffer, raw_buffer, 4);
+ }
+}
+
+/* Copy a 64-bit double-precision value from the current frame into
+ rare_buffer. This may include getting half of it from the next
+ register. */
+
+static void
+mips_read_fp_register_double (int regno, char *rare_buffer)
+{
+ int raw_size = REGISTER_RAW_SIZE (regno);
+
+ if (raw_size == 8 && !mips2_fp_compat ())
+ {
+ /* We have a 64-bit value for this register, and we should use
+ all 64 bits. */
+ if (!frame_register_read (selected_frame, regno, rare_buffer))
+ error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ }
+ else
+ {
+ if ((regno - FP0_REGNUM) & 1)
+ internal_error (__FILE__, __LINE__,
+ "mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register");
+
+ /* mips_read_fp_register_single will find the correct 32 bits from
+ each register. */
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ mips_read_fp_register_single (regno, rare_buffer + 4);
+ mips_read_fp_register_single (regno + 1, rare_buffer);
+ }
+ else
+ {
+ mips_read_fp_register_single (regno, rare_buffer);
+ mips_read_fp_register_single (regno + 1, rare_buffer + 4);
+ }
+ }
+}
+
static void
mips_print_register (int regnum, int all)
{
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
/* Get the data in raw format. */
- if (read_relative_register_raw_bytes (regnum, raw_buffer))
+ if (!frame_register_read (selected_frame, regnum, raw_buffer))
{
printf_filtered ("%s: [Invalid]", REGISTER_NAME (regnum));
return;
}
- /* If an even floating point register, also print as double. */
+ /* If we have a actual 32-bit floating point register (or we are in
+ 32-bit compatibility mode), and the register is even-numbered,
+ also print it as a double (spanning two registers). */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
+ && (REGISTER_RAW_SIZE (regnum) == 4
+ || mips2_fp_compat ())
&& !((regnum - FP0_REGNUM) & 1))
- if (REGISTER_RAW_SIZE (regnum) == 4) /* this would be silly on MIPS64 or N32 (Irix 6) */
- {
- char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
+ {
+ char *dbuffer = alloca (2 * MAX_REGISTER_RAW_SIZE);
- read_relative_register_raw_bytes (regnum, dbuffer);
- read_relative_register_raw_bytes (regnum + 1, dbuffer + MIPS_REGSIZE);
- REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
+ mips_read_fp_register_double (regnum, dbuffer);
- printf_filtered ("(d%d: ", regnum - FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- printf_filtered ("); ");
- }
+ printf_filtered ("(d%d: ", regnum - FP0_REGNUM);
+ val_print (mips_double_register_type (), dbuffer, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+ printf_filtered ("); ");
+ }
fputs_filtered (REGISTER_NAME (regnum), gdb_stdout);
/* The problem with printing numeric register names (r26, etc.) is that
/* If virtual format is floating, print it that way. */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (FP_REGISTER_DOUBLE)
- { /* show 8-byte floats as float AND double: */
- int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
+ if (REGISTER_RAW_SIZE (regnum) == 8 && !mips2_fp_compat ())
+ {
+ /* We have a meaningful 64-bit value in this register. Show
+ it as a 32-bit float and a 64-bit double. */
+ int offset = 4 * (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
printf_filtered (" (float) ");
- val_print (builtin_type_float, raw_buffer + offset, 0, 0,
+ val_print (mips_float_register_type (), raw_buffer + offset, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
printf_filtered (", (double) ");
- val_print (builtin_type_double, raw_buffer, 0, 0,
+ val_print (mips_double_register_type (), raw_buffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
}
else
{
int offset;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
offset = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
else
offset = 0;
-
+
print_scalar_formatted (raw_buffer + offset,
REGISTER_VIRTUAL_TYPE (regnum),
'x', 0, gdb_stdout);
}
}
-/* Replacement for generic do_registers_info.
+/* Replacement for generic do_registers_info.
Print regs in pretty columns. */
static int
do_fp_register_row (int regnum)
{ /* do values for FP (float) regs */
- char *raw_buffer[2];
- char *dbl_buffer;
- /* use HI and LO to control the order of combining two flt regs */
- int HI = (TARGET_BYTE_ORDER == BIG_ENDIAN);
- int LO = (TARGET_BYTE_ORDER != BIG_ENDIAN);
+ char *raw_buffer;
double doub, flt1, flt2; /* doubles extracted from raw hex data */
int inv1, inv2, inv3;
- raw_buffer[0] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
- raw_buffer[1] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
- dbl_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ raw_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
- /* Get the data in raw format. */
- if (read_relative_register_raw_bytes (regnum, raw_buffer[HI]))
- error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
- if (REGISTER_RAW_SIZE (regnum) == 4)
+ if (REGISTER_RAW_SIZE (regnum) == 4 || mips2_fp_compat ())
{
- /* 4-byte registers: we can fit two registers per row. */
- /* Also print every pair of 4-byte regs as an 8-byte double. */
- if (read_relative_register_raw_bytes (regnum + 1, raw_buffer[LO]))
- error ("can't read register %d (%s)",
- regnum + 1, REGISTER_NAME (regnum + 1));
-
- /* copy the two floats into one double, and unpack both */
- memcpy (dbl_buffer, raw_buffer, 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
- flt1 = unpack_double (builtin_type_float, raw_buffer[HI], &inv1);
- flt2 = unpack_double (builtin_type_float, raw_buffer[LO], &inv2);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
-
- printf_filtered (inv1 ? " %-5s: <invalid float>" :
- " %-5s%-17.9g", REGISTER_NAME (regnum), flt1);
- printf_filtered (inv2 ? " %-5s: <invalid float>" :
- " %-5s%-17.9g", REGISTER_NAME (regnum + 1), flt2);
- printf_filtered (inv3 ? " dbl: <invalid double>\n" :
- " dbl: %-24.17g\n", doub);
+ /* 4-byte registers: we can fit two registers per row. */
+ /* Also print every pair of 4-byte regs as an 8-byte double. */
+ mips_read_fp_register_single (regnum, raw_buffer);
+ flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
+
+ mips_read_fp_register_single (regnum + 1, raw_buffer);
+ flt2 = unpack_double (mips_float_register_type (), raw_buffer, &inv2);
+
+ mips_read_fp_register_double (regnum, raw_buffer);
+ doub = unpack_double (mips_double_register_type (), raw_buffer, &inv3);
+
+ printf_filtered (" %-5s", REGISTER_NAME (regnum));
+ if (inv1)
+ printf_filtered (": <invalid float>");
+ else
+ printf_filtered ("%-17.9g", flt1);
+
+ printf_filtered (" %-5s", REGISTER_NAME (regnum + 1));
+ if (inv2)
+ printf_filtered (": <invalid float>");
+ else
+ printf_filtered ("%-17.9g", flt2);
+
+ printf_filtered (" dbl: ");
+ if (inv3)
+ printf_filtered ("<invalid double>");
+ else
+ printf_filtered ("%-24.17g", doub);
+ printf_filtered ("\n");
+
/* may want to do hex display here (future enhancement) */
regnum += 2;
}
else
- { /* eight byte registers: print each one as float AND as double. */
- int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
-
- memcpy (dbl_buffer, raw_buffer[HI], 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
- flt1 = unpack_double (builtin_type_float,
- &raw_buffer[HI][offset], &inv1);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
-
- printf_filtered (inv1 ? " %-5s: <invalid float>" :
- " %-5s flt: %-17.9g", REGISTER_NAME (regnum), flt1);
- printf_filtered (inv3 ? " dbl: <invalid double>\n" :
- " dbl: %-24.17g\n", doub);
+ {
+ /* Eight byte registers: print each one as float AND as double. */
+ mips_read_fp_register_single (regnum, raw_buffer);
+ flt1 = unpack_double (mips_double_register_type (), raw_buffer, &inv1);
+
+ mips_read_fp_register_double (regnum, raw_buffer);
+ doub = unpack_double (mips_double_register_type (), raw_buffer, &inv3);
+
+ printf_filtered (" %-5s: ", REGISTER_NAME (regnum));
+ if (inv1)
+ printf_filtered ("<invalid float>");
+ else
+ printf_filtered ("flt: %-17.9g", flt1);
+
+ printf_filtered (" dbl: ");
+ if (inv3)
+ printf_filtered ("<invalid double>");
+ else
+ printf_filtered ("%-24.17g", doub);
+
+ printf_filtered ("\n");
/* may want to do hex display here (future enhancement) */
regnum++;
}
do_gp_register_row (int regnum)
{
/* do values for GP (int) regs */
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
int ncols = (MIPS_REGSIZE == 8 ? 4 : 8); /* display cols per row */
int col, byte;
int start_regnum = regnum;
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
- if (read_relative_register_raw_bytes (regnum, raw_buffer))
+ if (!frame_register_read (selected_frame, regnum, raw_buffer))
error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
/* pad small registers */
for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_VIRTUAL_SIZE (regnum)); byte++)
printf_filtered (" ");
/* Now print the register value in hex, endian order. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
byte < REGISTER_RAW_SIZE (regnum);
byte++)
/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
-void
+static void
mips_do_registers_info (int regnum, int fpregs)
{
if (regnum != -1) /* do one specified register */
}
}
-/* Return number of args passed to a frame. described by FIP.
- Can return -1, meaning no way to tell. */
-
-int
-mips_frame_num_args (struct frame_info *frame)
-{
- return -1;
-}
-
/* Is this a branch with a delay slot? */
static int is_delayed (unsigned long);
We must skip more in the case where part of the prologue is in the
delay slot of a non-prologue instruction). */
-CORE_ADDR
+static CORE_ADDR
mips_skip_prologue (CORE_ADDR pc)
{
/* See if we can determine the end of the prologue via the symbol table.
{
/* We need to break a 64bit float in two 32 bit halves and
spread them across a floating-point register pair. */
- lo->buf_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
- hi->buf_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 0 : 4;
- lo->reg_offset = ((TARGET_BYTE_ORDER == BIG_ENDIAN
+ lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& REGISTER_RAW_SIZE (FP0_REGNUM) == 8)
? 4 : 0);
hi->reg_offset = lo->reg_offset;
{
/* The floating point value fits in a single floating-point
register. */
- lo->reg_offset = ((TARGET_BYTE_ORDER == BIG_ENDIAN
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& REGISTER_RAW_SIZE (FP0_REGNUM) == 8
&& len == 4)
? 4 : 0);
int regnum = 2;
lo->reg = regnum + 0;
hi->reg = regnum + 1;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& len < MIPS_SAVED_REGSIZE)
{
/* "un-left-justify" the value in the low register */
hi->reg_offset = 0;
hi->len = 0;
}
- else if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& len > MIPS_SAVED_REGSIZE /* odd-size structs */
&& len < MIPS_SAVED_REGSIZE * 2
&& (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
hi->len = 0;
}
}
- if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& REGISTER_RAW_SIZE (regnum) == 8
&& MIPS_SAVED_REGSIZE == 4)
{
/* Given a return value in `regbuf' with a type `valtype', extract and
copy its value into `valbuf'. */
-void
-mips_extract_return_value (struct type *valtype,
- char regbuf[REGISTER_BYTES],
- char *valbuf)
+static void
+mips_eabi_extract_return_value (struct type *valtype,
+ char regbuf[REGISTER_BYTES],
+ char *valbuf)
+{
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
+ lo.len);
+
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
+ hi.len);
+}
+
+static void
+mips_o64_extract_return_value (struct type *valtype,
+ char regbuf[REGISTER_BYTES],
+ char *valbuf)
{
struct return_value_word lo;
struct return_value_word hi;
- return_value_location (valtype, &lo, &hi);
+ return_value_location (valtype, &hi, &lo);
memcpy (valbuf + lo.buf_offset,
regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
lo.len);
if (hi.len > 0)
- memcpy (valbuf + hi.buf_offset,
- regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
- hi.len);
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
+ hi.len);
+}
+
+/* Given a return value in `valbuf' with a type `valtype', write it's
+ value into the appropriate register. */
+
+static void
+mips_eabi_store_return_value (struct type *valtype, char *valbuf)
+{
+ char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ write_register_bytes (REGISTER_BYTE (lo.reg),
+ raw_buffer,
+ REGISTER_RAW_SIZE (lo.reg));
+
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ write_register_bytes (REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ REGISTER_RAW_SIZE (hi.reg));
+ }
}
-/* Given a return value in `valbuf' with a type `valtype', write it's
- value into the appropriate register. */
-
-void
-mips_store_return_value (struct type *valtype, char *valbuf)
+static void
+mips_o64_store_return_value (struct type *valtype, char *valbuf)
{
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
struct return_value_word lo;
struct return_value_word hi;
- return_value_location (valtype, &lo, &hi);
+ return_value_location (valtype, &hi, &lo);
memset (raw_buffer, 0, sizeof (raw_buffer));
memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
}
}
+/* O32 ABI stuff. */
+
+static void
+mips_o32_xfer_return_value (struct type *type,
+ struct regcache *regcache,
+ bfd_byte *in, const bfd_byte *out)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 4
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A single-precision floating-point value. It fits in the
+ least significant part of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, in, out, 0);
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 8
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A double-precision floating-point value. It fits in the
+ least significant part of FP0/FP1 but with byte ordering
+ based on the target (???). */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0/$fp1\n");
+ switch (TARGET_BYTE_ORDER)
+ {
+ case BFD_ENDIAN_LITTLE:
+ mips_xfer_register (regcache, FP0_REGNUM + 0, 4,
+ TARGET_BYTE_ORDER, in, out, 0);
+ mips_xfer_register (regcache, FP0_REGNUM + 1, 4,
+ TARGET_BYTE_ORDER, in, out, 4);
+ break;
+ case BFD_ENDIAN_BIG:
+ mips_xfer_register (regcache, FP0_REGNUM + 1, 4,
+ TARGET_BYTE_ORDER, in, out, 0);
+ mips_xfer_register (regcache, FP0_REGNUM + 0, 4,
+ TARGET_BYTE_ORDER, in, out, 4);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+ }
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
+ int regnum;
+ int field;
+ for (field = 0, regnum = FP0_REGNUM;
+ field < TYPE_NFIELDS (type);
+ field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
+ mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, in, out, offset);
+ }
+ }
+#endif
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += REGISTER_RAW_SIZE (regnum), regnum++)
+ {
+ int xfer = REGISTER_RAW_SIZE (regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN,
+ in, out, offset);
+ }
+ }
+#endif
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. o32 thinks registers are 4 byte, regardless of
+ the ISA. mips_stack_argsize controls this. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += mips_stack_argsize (), regnum++)
+ {
+ int xfer = mips_stack_argsize ();
+ int pos = 0;
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER,
+ in, out, offset);
+ }
+ }
+}
+
+static void
+mips_o32_extract_return_value (struct type *type,
+ struct regcache *regcache,
+ void *valbuf)
+{
+ mips_o32_xfer_return_value (type, regcache, valbuf, NULL);
+}
+
+static void
+mips_o32_store_return_value (struct type *type, char *valbuf)
+{
+ mips_o32_xfer_return_value (type, current_regcache, NULL, valbuf);
+}
+
+/* N32/N44 ABI stuff. */
+
+static void
+mips_n32n64_xfer_return_value (struct type *type,
+ struct regcache *regcache,
+ bfd_byte *in, const bfd_byte *out)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A floating-point value belongs in the least significant part
+ of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, in, out, 0);
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE);
+ int regnum;
+ int field;
+ for (field = 0, regnum = FP0_REGNUM;
+ field < TYPE_NFIELDS (type);
+ field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
+ mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, in, out, offset);
+ }
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += REGISTER_RAW_SIZE (regnum), regnum++)
+ {
+ int xfer = REGISTER_RAW_SIZE (regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN,
+ in, out, offset);
+ }
+ }
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += REGISTER_RAW_SIZE (regnum), regnum++)
+ {
+ int xfer = REGISTER_RAW_SIZE (regnum);
+ int pos = 0;
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER,
+ in, out, offset);
+ }
+ }
+}
+
+static void
+mips_n32n64_extract_return_value (struct type *type,
+ struct regcache *regcache,
+ void *valbuf)
+{
+ mips_n32n64_xfer_return_value (type, regcache, valbuf, NULL);
+}
+
+static void
+mips_n32n64_store_return_value (struct type *type, char *valbuf)
+{
+ mips_n32n64_xfer_return_value (type, current_regcache, NULL, valbuf);
+}
+
+static void
+mips_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+{
+ /* Nothing to do -- push_arguments does all the work. */
+}
+
+static CORE_ADDR
+mips_extract_struct_value_address (struct regcache *regcache)
+{
+ /* FIXME: This will only work at random. The caller passes the
+ struct_return address in V0, but it is not preserved. It may
+ still be there, or this may be a random value. */
+ LONGEST val;
+
+ regcache_cooked_read_signed (regcache, V0_REGNUM, &val);
+ return val;
+}
+
/* Exported procedure: Is PC in the signal trampoline code */
-int
-in_sigtramp (CORE_ADDR pc, char *ignore)
+static int
+mips_pc_in_sigtramp (CORE_ADDR pc, char *ignore)
{
if (sigtramp_address == 0)
fixup_sigtramp ();
static void
show_mipsfpu_command (char *args, int from_tty)
{
- char *msg;
char *fpu;
switch (MIPS_FPU_TYPE)
{
case MIPS_FPU_NONE:
fpu = "absent (none)";
break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
}
if (mips_fpu_type_auto)
printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
{
mips_fpu_type = MIPS_FPU_SINGLE;
mips_fpu_type_auto = 0;
- if (GDB_MULTI_ARCH)
- {
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
- }
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
}
static void
{
mips_fpu_type = MIPS_FPU_DOUBLE;
mips_fpu_type_auto = 0;
- if (GDB_MULTI_ARCH)
- {
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
- }
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
}
static void
{
mips_fpu_type = MIPS_FPU_NONE;
mips_fpu_type_auto = 0;
- if (GDB_MULTI_ARCH)
- {
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
- }
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
}
static void
printf_unfiltered ("%s\n", mips_processor_type_table[i].name);
/* Restore the value. */
- tmp_mips_processor_type = strsave (mips_processor_type);
+ tmp_mips_processor_type = xstrdup (mips_processor_type);
return;
}
{
error ("Unknown processor type `%s'.", tmp_mips_processor_type);
/* Restore its value. */
- tmp_mips_processor_type = strsave (mips_processor_type);
+ tmp_mips_processor_type = xstrdup (mips_processor_type);
}
}
/* Modify the actual processor type. */
-int
+static int
mips_set_processor_type (char *str)
{
- int i, j;
+ int i;
if (str == NULL)
return 0;
it's definitely a 16-bit function. Otherwise, we have to just
guess that if the address passed in is odd, it's 16-bits. */
if (proc_desc)
- info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ?
+ info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ?
bfd_mach_mips16 : TM_PRINT_INSN_MACH;
else
- info->mach = pc_is_mips16 (memaddr) ?
+ info->mach = pc_is_mips16 (memaddr) ?
bfd_mach_mips16 : TM_PRINT_INSN_MACH;
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
/* Call the appropriate disassembler based on the target endian-ness. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
return print_insn_big_mips (memaddr, info);
else
return print_insn_little_mips (memaddr, info);
(if necessary) to point to the actual memory location where the
breakpoint should be inserted. */
-unsigned char *
+static const unsigned char *
mips_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
{
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (pc_is_mips16 (*pcptr))
{
- static char mips16_big_breakpoint[] = MIPS16_BIG_BREAKPOINT;
+ static unsigned char mips16_big_breakpoint[] =
+ MIPS16_BIG_BREAKPOINT;
*pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
}
else
{
- static char big_breakpoint[] = BIG_BREAKPOINT;
- static char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
- static char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+ static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
+ static unsigned char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
+ static unsigned char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
*lenptr = sizeof (big_breakpoint);
{
if (pc_is_mips16 (*pcptr))
{
- static char mips16_little_breakpoint[] = MIPS16_LITTLE_BREAKPOINT;
+ static unsigned char mips16_little_breakpoint[] =
+ MIPS16_LITTLE_BREAKPOINT;
*pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static char little_breakpoint[] = LITTLE_BREAKPOINT;
- static char pmon_little_breakpoint[] = PMON_LITTLE_BREAKPOINT;
- static char idt_little_breakpoint[] = IDT_LITTLE_BREAKPOINT;
+ static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
+ static unsigned char pmon_little_breakpoint[] =
+ PMON_LITTLE_BREAKPOINT;
+ static unsigned char idt_little_breakpoint[] =
+ IDT_LITTLE_BREAKPOINT;
*lenptr = sizeof (little_breakpoint);
This function implements the SKIP_TRAMPOLINE_CODE macro.
*/
-CORE_ADDR
+static CORE_ADDR
mips_skip_stub (CORE_ADDR pc)
{
char *name;
/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
-int
+static int
mips_in_call_stub (CORE_ADDR pc, char *name)
{
CORE_ADDR start_addr;
/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline).
This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */
-int
+static int
mips_in_return_stub (CORE_ADDR pc, char *name)
{
CORE_ADDR start_addr;
point (e.g. programs in ROM) should define a symbol __CALL_DUMMY_ADDRESS
whose address is the location where the breakpoint should be placed. */
-CORE_ADDR
+static CORE_ADDR
mips_call_dummy_address (void)
{
struct minimal_symbol *sym;
}
-/* If the current gcc for for this target does not produce correct debugging
+/* If the current gcc for this target does not produce correct debugging
information for float parameters, both prototyped and unprototyped, then
define this macro. This forces gdb to always assume that floats are
passed as doubles and then converted in the callee.
static void
mips_get_saved_register (char *raw_buffer,
- int *optimized,
+ int *optimizedp,
CORE_ADDR *addrp,
struct frame_info *frame,
int regnum,
- enum lval_type *lval)
+ enum lval_type *lvalp)
{
- CORE_ADDR addr;
+ CORE_ADDR addrx;
+ enum lval_type lvalx;
+ int optimizedx;
+ int realnum;
if (!target_has_registers)
error ("No registers.");
- /* Normal systems don't optimize out things with register numbers. */
- if (optimized != NULL)
- *optimized = 0;
- addr = find_saved_register (frame, regnum);
- if (addr != 0)
+ /* Make certain that all needed parameters are present. */
+ if (addrp == NULL)
+ addrp = &addrx;
+ if (lvalp == NULL)
+ lvalp = &lvalx;
+ if (optimizedp == NULL)
+ optimizedp = &optimizedx;
+ frame_register_unwind (get_next_frame (frame), regnum, optimizedp, lvalp,
+ addrp, &realnum, raw_buffer);
+ /* FIXME: cagney/2002-09-13: This is just so bad. The MIPS should
+ have a pseudo register range that correspons to the ABI's, rather
+ than the ISA's, view of registers. These registers would then
+ implicitly describe their size and hence could be used without
+ the below munging. */
+ if ((*lvalp) == lval_memory)
{
- if (lval != NULL)
- *lval = lval_memory;
- if (regnum == SP_REGNUM)
- {
- if (raw_buffer != NULL)
- {
- /* Put it back in target format. */
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum),
- (LONGEST) addr);
- }
- if (addrp != NULL)
- *addrp = 0;
- return;
- }
if (raw_buffer != NULL)
{
- LONGEST val;
if (regnum < 32)
- /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
- saved. */
- val = read_memory_integer (addr, MIPS_SAVED_REGSIZE);
- else
- val = read_memory_integer (addr, REGISTER_RAW_SIZE (regnum));
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), val);
+ {
+ /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
+ saved. */
+ LONGEST val = read_memory_integer ((*addrp), MIPS_SAVED_REGSIZE);
+ store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), val);
+ }
}
}
- else
- {
- if (lval != NULL)
- *lval = lval_register;
- addr = REGISTER_BYTE (regnum);
- if (raw_buffer != NULL)
- read_register_gen (regnum, raw_buffer);
- }
- if (addrp != NULL)
- *addrp = addr;
}
/* Immediately after a function call, return the saved pc.
}
+/* Convert a dbx stab register number (from `r' declaration) to a gdb
+ REGNUM */
+
+static int
+mips_stab_reg_to_regnum (int num)
+{
+ if (num < 32)
+ return num;
+ else
+ return num + FP0_REGNUM - 38;
+}
+
+/* Convert a ecoff register number to a gdb REGNUM */
+
+static int
+mips_ecoff_reg_to_regnum (int num)
+{
+ if (num < 32)
+ return num;
+ else
+ return num + FP0_REGNUM - 32;
+}
+
+/* Convert an integer into an address. By first converting the value
+ into a pointer and then extracting it signed, the address is
+ guarenteed to be correctly sign extended. */
+
+static CORE_ADDR
+mips_integer_to_address (struct type *type, void *buf)
+{
+ char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
+ LONGEST val = unpack_long (type, buf);
+ store_signed_integer (tmp, TYPE_LENGTH (builtin_type_void_data_ptr), val);
+ return extract_signed_integer (tmp,
+ TYPE_LENGTH (builtin_type_void_data_ptr));
+}
+
+static void
+mips_find_abi_section (bfd *abfd, asection *sect, void *obj)
+{
+ enum mips_abi *abip = (enum mips_abi *) obj;
+ const char *name = bfd_get_section_name (abfd, sect);
+
+ if (*abip != MIPS_ABI_UNKNOWN)
+ return;
+
+ if (strncmp (name, ".mdebug.", 8) != 0)
+ return;
+
+ if (strcmp (name, ".mdebug.abi32") == 0)
+ *abip = MIPS_ABI_O32;
+ else if (strcmp (name, ".mdebug.abiN32") == 0)
+ *abip = MIPS_ABI_N32;
+ else if (strcmp (name, ".mdebug.abi64") == 0)
+ *abip = MIPS_ABI_N64;
+ else if (strcmp (name, ".mdebug.abiO64") == 0)
+ *abip = MIPS_ABI_O64;
+ else if (strcmp (name, ".mdebug.eabi32") == 0)
+ *abip = MIPS_ABI_EABI32;
+ else if (strcmp (name, ".mdebug.eabi64") == 0)
+ *abip = MIPS_ABI_EABI64;
+ else
+ warning ("unsupported ABI %s.", name + 8);
+}
+
+static enum mips_abi
+global_mips_abi (void)
+{
+ int i;
+
+ for (i = 0; mips_abi_strings[i] != NULL; i++)
+ if (mips_abi_strings[i] == mips_abi_string)
+ return (enum mips_abi) i;
+
+ internal_error (__FILE__, __LINE__,
+ "unknown ABI string");
+}
+
static struct gdbarch *
mips_gdbarch_init (struct gdbarch_info info,
struct gdbarch_list *arches)
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
int elf_flags;
- enum mips_abi mips_abi;
+ enum mips_abi mips_abi, found_abi, wanted_abi;
+ enum gdb_osabi osabi = GDB_OSABI_UNKNOWN;
- /* Extract the elf_flags if available */
- if (info.abfd != NULL
- && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
- elf_flags = elf_elfheader (info.abfd)->e_flags;
- else
- elf_flags = 0;
+ /* Reset the disassembly info, in case it was set to something
+ non-default. */
+ tm_print_insn_info.flavour = bfd_target_unknown_flavour;
+ tm_print_insn_info.arch = bfd_arch_unknown;
+ tm_print_insn_info.mach = 0;
+
+ elf_flags = 0;
- /* Check ELF_FLAGS to see if it specifies the ABI being used. */
+ if (info.abfd)
+ {
+ /* First of all, extract the elf_flags, if available. */
+ if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
+ elf_flags = elf_elfheader (info.abfd)->e_flags;
+
+ /* Try to determine the OS ABI of the object we are loading. If
+ we end up with `unknown', just leave it that way. */
+ osabi = gdbarch_lookup_osabi (info.abfd);
+ }
+
+ /* Check ELF_FLAGS to see if it specifies the ABI being used. */
switch ((elf_flags & EF_MIPS_ABI))
{
case E_MIPS_ABI_O32:
break;
}
- /* Try the architecture for any hint of the corect ABI */
+ /* GCC creates a pseudo-section whose name describes the ABI. */
+ if (mips_abi == MIPS_ABI_UNKNOWN && info.abfd != NULL)
+ bfd_map_over_sections (info.abfd, mips_find_abi_section, &mips_abi);
+
+ /* If we have no bfd, then mips_abi will still be MIPS_ABI_UNKNOWN.
+ Use the ABI from the last architecture if there is one. */
+ if (info.abfd == NULL && arches != NULL)
+ mips_abi = gdbarch_tdep (arches->gdbarch)->found_abi;
+
+ /* Try the architecture for any hint of the correct ABI. */
if (mips_abi == MIPS_ABI_UNKNOWN
&& info.bfd_arch_info != NULL
&& info.bfd_arch_info->arch == bfd_arch_mips)
case bfd_mach_mips5000:
mips_abi = MIPS_ABI_EABI64;
break;
+ case bfd_mach_mips8000:
+ case bfd_mach_mips10000:
+ /* On Irix, ELF64 executables use the N64 ABI. The
+ pseudo-sections which describe the ABI aren't present
+ on IRIX. (Even for executables created by gcc.) */
+ if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour
+ && elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64)
+ mips_abi = MIPS_ABI_N64;
+ else
+ mips_abi = MIPS_ABI_N32;
+ break;
}
}
-#ifdef MIPS_DEFAULT_ABI
+
if (mips_abi == MIPS_ABI_UNKNOWN)
- mips_abi = MIPS_DEFAULT_ABI;
-#endif
+ mips_abi = MIPS_ABI_O32;
+
+ /* Now that we have found what the ABI for this binary would be,
+ check whether the user is overriding it. */
+ found_abi = mips_abi;
+ wanted_abi = global_mips_abi ();
+ if (wanted_abi != MIPS_ABI_UNKNOWN)
+ mips_abi = wanted_abi;
if (gdbarch_debug)
{
fprintf_unfiltered (gdb_stdlog,
"mips_gdbarch_init: mips_abi = %d\n",
mips_abi);
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: found_mips_abi = %d\n",
+ found_abi);
}
/* try to find a pre-existing architecture */
arches = gdbarch_list_lookup_by_info (arches->next, &info))
{
/* MIPS needs to be pedantic about which ABI the object is
- using. */
+ using. */
if (gdbarch_tdep (arches->gdbarch)->elf_flags != elf_flags)
continue;
if (gdbarch_tdep (arches->gdbarch)->mips_abi != mips_abi)
continue;
- return arches->gdbarch;
+ if (gdbarch_tdep (arches->gdbarch)->osabi == osabi)
+ return arches->gdbarch;
}
- /* Need a new architecture. Fill in a target specific vector. */
+ /* Need a new architecture. Fill in a target specific vector. */
tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
gdbarch = gdbarch_alloc (&info, tdep);
tdep->elf_flags = elf_flags;
+ tdep->osabi = osabi;
- /* Initially set everything according to the ABI. */
+ /* Initially set everything according to the default ABI/ISA. */
set_gdbarch_short_bit (gdbarch, 16);
set_gdbarch_int_bit (gdbarch, 32);
set_gdbarch_float_bit (gdbarch, 32);
set_gdbarch_double_bit (gdbarch, 64);
set_gdbarch_long_double_bit (gdbarch, 64);
+ set_gdbarch_register_raw_size (gdbarch, mips_register_raw_size);
+ set_gdbarch_max_register_raw_size (gdbarch, 8);
+ set_gdbarch_max_register_virtual_size (gdbarch, 8);
+ tdep->found_abi = found_abi;
tdep->mips_abi = mips_abi;
+
+ set_gdbarch_elf_make_msymbol_special (gdbarch,
+ mips_elf_make_msymbol_special);
+
switch (mips_abi)
{
case MIPS_ABI_O32:
- tdep->mips_abi_string = "o32";
+ set_gdbarch_push_arguments (gdbarch, mips_o32_push_arguments);
+ set_gdbarch_deprecated_store_return_value (gdbarch, mips_o32_store_return_value);
+ set_gdbarch_extract_return_value (gdbarch, mips_o32_extract_return_value);
tdep->mips_default_saved_regsize = 4;
tdep->mips_default_stack_argsize = 4;
tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
- tdep->mips_regs_have_home_p = 1;
tdep->gdb_target_is_mips64 = 0;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_reg_struct_has_addr (gdbarch,
+ mips_o32_reg_struct_has_addr);
+ set_gdbarch_use_struct_convention (gdbarch,
+ mips_o32_use_struct_convention);
break;
case MIPS_ABI_O64:
- tdep->mips_abi_string = "o64";
+ set_gdbarch_push_arguments (gdbarch, mips_o64_push_arguments);
+ set_gdbarch_deprecated_store_return_value (gdbarch, mips_o64_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch, mips_o64_extract_return_value);
tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
- tdep->mips_regs_have_home_p = 1;
tdep->gdb_target_is_mips64 = 1;
- tdep->default_mask_address_p = 0;
+ tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_reg_struct_has_addr (gdbarch,
+ mips_o32_reg_struct_has_addr);
+ set_gdbarch_use_struct_convention (gdbarch,
+ mips_o32_use_struct_convention);
break;
case MIPS_ABI_EABI32:
- tdep->mips_abi_string = "eabi32";
+ set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments);
+ set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
tdep->mips_default_saved_regsize = 4;
tdep->mips_default_stack_argsize = 4;
tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 0;
tdep->gdb_target_is_mips64 = 0;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_reg_struct_has_addr (gdbarch,
+ mips_eabi_reg_struct_has_addr);
+ set_gdbarch_use_struct_convention (gdbarch,
+ mips_eabi_use_struct_convention);
break;
case MIPS_ABI_EABI64:
- tdep->mips_abi_string = "eabi64";
+ set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments);
+ set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 0;
tdep->gdb_target_is_mips64 = 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_reg_struct_has_addr (gdbarch,
+ mips_eabi_reg_struct_has_addr);
+ set_gdbarch_use_struct_convention (gdbarch,
+ mips_eabi_use_struct_convention);
break;
case MIPS_ABI_N32:
- tdep->mips_abi_string = "n32";
- tdep->mips_default_saved_regsize = 4;
+ set_gdbarch_push_arguments (gdbarch, mips_n32n64_push_arguments);
+ set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value);
+ set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value);
+ tdep->mips_default_saved_regsize = 8;
tdep->mips_default_stack_argsize = 8;
tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 0;
- tdep->gdb_target_is_mips64 = 0;
+ tdep->gdb_target_is_mips64 = 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* Set up the disassembler info, so that we get the right
+ register names from libopcodes. */
+ tm_print_insn_info.flavour = bfd_target_elf_flavour;
+ tm_print_insn_info.arch = bfd_arch_mips;
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips
+ && info.bfd_arch_info->mach)
+ tm_print_insn_info.mach = info.bfd_arch_info->mach;
+ else
+ tm_print_insn_info.mach = bfd_mach_mips8000;
+
+ set_gdbarch_use_struct_convention (gdbarch,
+ mips_n32n64_use_struct_convention);
+ set_gdbarch_reg_struct_has_addr (gdbarch,
+ mips_n32n64_reg_struct_has_addr);
break;
- default:
- tdep->mips_abi_string = "default";
- tdep->mips_default_saved_regsize = MIPS_REGSIZE;
- tdep->mips_default_stack_argsize = MIPS_REGSIZE;
- tdep->mips_fp_register_double = (REGISTER_VIRTUAL_SIZE (FP0_REGNUM) == 8);
+ case MIPS_ABI_N64:
+ set_gdbarch_push_arguments (gdbarch, mips_n32n64_push_arguments);
+ set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value);
+ set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value);
+ tdep->mips_default_saved_regsize = 8;
+ tdep->mips_default_stack_argsize = 8;
+ tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
- tdep->mips_regs_have_home_p = 1;
- tdep->gdb_target_is_mips64 = 0;
+ tdep->gdb_target_is_mips64 = 1;
tdep->default_mask_address_p = 0;
- set_gdbarch_long_bit (gdbarch, 32);
- set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_bit (gdbarch, 64);
+ set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* Set up the disassembler info, so that we get the right
+ register names from libopcodes. */
+ tm_print_insn_info.flavour = bfd_target_elf_flavour;
+ tm_print_insn_info.arch = bfd_arch_mips;
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips
+ && info.bfd_arch_info->mach)
+ tm_print_insn_info.mach = info.bfd_arch_info->mach;
+ else
+ tm_print_insn_info.mach = bfd_mach_mips8000;
+
+ set_gdbarch_use_struct_convention (gdbarch,
+ mips_n32n64_use_struct_convention);
+ set_gdbarch_reg_struct_has_addr (gdbarch,
+ mips_n32n64_reg_struct_has_addr);
break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ "unknown ABI in switch");
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
``We deliberately don't allow "-gp32" to set the MIPS_32BITMODE
flag in object files because to do so would make it impossible to
- link with libraries compiled without "-gp32". This is
+ link with libraries compiled without "-gp32". This is
unnecessarily restrictive.
-
+
We could solve this problem by adding "-gp32" multilibs to gcc,
but to set this flag before gcc is built with such multilibs will
break too many systems.''
But even more unhelpfully, the default linker output target for
mips64-elf is elf32-bigmips, and has EF_MIPS_32BIT_MODE set, even
for 64-bit programs - you need to change the ABI to change this,
- and not all gcc targets support that currently. Therefore using
+ and not all gcc targets support that currently. Therefore using
this flag to detect 32-bit mode would do the wrong thing given
the current gcc - it would make GDB treat these 64-bit programs
- as 32-bit programs by default. */
+ as 32-bit programs by default. */
/* enable/disable the MIPS FPU */
if (!mips_fpu_type_auto)
/* MIPS version of register names. NOTE: At present the MIPS
register name management is part way between the old -
#undef/#define REGISTER_NAMES and the new REGISTER_NAME(nr).
- Further work on it is required. */
+ Further work on it is required. */
+ /* NOTE: many targets (esp. embedded) do not go thru the
+ gdbarch_register_name vector at all, instead bypassing it
+ by defining REGISTER_NAMES. */
set_gdbarch_register_name (gdbarch, mips_register_name);
set_gdbarch_read_pc (gdbarch, mips_read_pc);
set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
- set_gdbarch_read_fp (gdbarch, generic_target_read_fp);
- set_gdbarch_write_fp (gdbarch, generic_target_write_fp);
- set_gdbarch_read_sp (gdbarch, generic_target_read_sp);
+ set_gdbarch_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */
+ set_gdbarch_read_sp (gdbarch, mips_read_sp);
set_gdbarch_write_sp (gdbarch, generic_target_write_sp);
+ /* Add/remove bits from an address. The MIPS needs be careful to
+ ensure that all 32 bit addresses are sign extended to 64 bits. */
+ set_gdbarch_addr_bits_remove (gdbarch, mips_addr_bits_remove);
+
+ /* There's a mess in stack frame creation. See comments in
+ blockframe.c near reference to INIT_FRAME_PC_FIRST. */
+ set_gdbarch_init_frame_pc_first (gdbarch, mips_init_frame_pc_first);
+ set_gdbarch_init_frame_pc (gdbarch, init_frame_pc_noop);
+
+ /* Map debug register numbers onto internal register numbers. */
+ set_gdbarch_stab_reg_to_regnum (gdbarch, mips_stab_reg_to_regnum);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_ecoff_reg_to_regnum);
+
/* Initialize a frame */
set_gdbarch_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
+ set_gdbarch_frame_init_saved_regs (gdbarch, mips_frame_init_saved_regs);
/* MIPS version of CALL_DUMMY */
set_gdbarch_call_dummy_p (gdbarch, 1);
set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+#if OLD_STYLE_MIPS_DUMMY_FRAMES
set_gdbarch_use_generic_dummy_frames (gdbarch, 0);
+#else
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 1);
+#endif
set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
set_gdbarch_call_dummy_address (gdbarch, mips_call_dummy_address);
+ set_gdbarch_push_return_address (gdbarch, mips_push_return_address);
+#if OLD_STYLE_MIPS_DUMMY_FRAMES
+ set_gdbarch_push_dummy_frame (gdbarch, mips_push_dummy_frame);
+#else
+ set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
+#endif
+ set_gdbarch_pop_frame (gdbarch, mips_pop_frame);
set_gdbarch_call_dummy_start_offset (gdbarch, 0);
set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_fix_call_dummy (gdbarch, mips_fix_call_dummy);
+#if OLD_STYLE_MIPS_DUMMY_FRAMES
set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_at_entry_point);
+#else
+ set_gdbarch_pc_in_call_dummy (gdbarch, generic_pc_in_call_dummy);
+#endif
set_gdbarch_call_dummy_words (gdbarch, mips_call_dummy_words);
set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof (mips_call_dummy_words));
set_gdbarch_push_return_address (gdbarch, mips_push_return_address);
- set_gdbarch_push_arguments (gdbarch, mips_push_arguments);
- set_gdbarch_register_convertible (gdbarch, generic_register_convertible_not);
+ set_gdbarch_frame_align (gdbarch, mips_frame_align);
+#if OLD_STYLE_MIPS_DUMMY_FRAMES
+#else
+ set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
+#endif
+ set_gdbarch_register_convertible (gdbarch, mips_register_convertible);
+ set_gdbarch_register_convert_to_virtual (gdbarch,
+ mips_register_convert_to_virtual);
+ set_gdbarch_register_convert_to_raw (gdbarch,
+ mips_register_convert_to_raw);
+
set_gdbarch_coerce_float_to_double (gdbarch, mips_coerce_float_to_double);
+ set_gdbarch_frame_chain (gdbarch, mips_frame_chain);
set_gdbarch_frame_chain_valid (gdbarch, func_frame_chain_valid);
+ set_gdbarch_frameless_function_invocation (gdbarch,
+ generic_frameless_function_invocation_not);
+ set_gdbarch_frame_saved_pc (gdbarch, mips_frame_saved_pc);
+ set_gdbarch_frame_args_address (gdbarch, default_frame_address);
+ set_gdbarch_frame_locals_address (gdbarch, default_frame_address);
+ set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
+ set_gdbarch_frame_args_skip (gdbarch, 0);
+
set_gdbarch_get_saved_register (gdbarch, mips_get_saved_register);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc);
set_gdbarch_decr_pc_after_break (gdbarch, 0);
- set_gdbarch_ieee_float (gdbarch, 1);
set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue);
set_gdbarch_saved_pc_after_call (gdbarch, mips_saved_pc_after_call);
+ set_gdbarch_pointer_to_address (gdbarch, signed_pointer_to_address);
+ set_gdbarch_address_to_pointer (gdbarch, address_to_signed_pointer);
+ set_gdbarch_integer_to_address (gdbarch, mips_integer_to_address);
+
+ set_gdbarch_function_start_offset (gdbarch, 0);
+
+ /* There are MIPS targets which do not yet use this since they still
+ define REGISTER_VIRTUAL_TYPE. */
+ set_gdbarch_register_virtual_type (gdbarch, mips_register_virtual_type);
+ set_gdbarch_register_virtual_size (gdbarch, generic_register_size);
+
+ set_gdbarch_do_registers_info (gdbarch, mips_do_registers_info);
+ set_gdbarch_pc_in_sigtramp (gdbarch, mips_pc_in_sigtramp);
+
+ /* Hook in OS ABI-specific overrides, if they have been registered. */
+ gdbarch_init_osabi (info, gdbarch, osabi);
+
+ set_gdbarch_store_struct_return (gdbarch, mips_store_struct_return);
+ set_gdbarch_extract_struct_value_address (gdbarch,
+ mips_extract_struct_value_address);
+
+ set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub);
+
+ set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
+ set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub);
+
return gdbarch;
}
+static void
+mips_abi_update (char *ignore_args, int from_tty,
+ struct cmd_list_element *c)
+{
+ struct gdbarch_info info;
+
+ /* Force the architecture to update, and (if it's a MIPS architecture)
+ mips_gdbarch_init will take care of the rest. */
+ gdbarch_info_init (&info);
+ gdbarch_update_p (info);
+}
+
static void
mips_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
{
ef_mips_arch = 3;
break;
case E_MIPS_ARCH_4:
- ef_mips_arch = 0;
+ ef_mips_arch = 4;
break;
default:
+ ef_mips_arch = 0;
break;
}
/* determine the size of a pointer */
fprintf_unfiltered (file,
"mips_dump_tdep: tdep->mips_abi = %d (%s)\n",
tdep->mips_abi,
- tdep->mips_abi_string);
+ mips_abi_strings[tdep->mips_abi]);
fprintf_unfiltered (file,
"mips_dump_tdep: mips_mask_address_p() %d (default %d)\n",
mips_mask_address_p (),
fprintf_unfiltered (file,
"mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
FP_REGISTER_DOUBLE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_REGS_HAVE_HOME_P = %d\n",
- MIPS_REGS_HAVE_HOME_P);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_DEFAULT_STACK_ARGSIZE = %d\n",
MIPS_DEFAULT_STACK_ARGSIZE);
fprintf_unfiltered (file,
"mips_dump_tdep: CAUSE_REGNUM = %d\n",
CAUSE_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: CPLUS_MARKER = %c\n",
- CPLUS_MARKER);
- fprintf_unfiltered (file,
- "mips_dump_tdep: DEFAULT_MIPS_TYPE = %s\n",
- DEFAULT_MIPS_TYPE);
fprintf_unfiltered (file,
"mips_dump_tdep: DO_REGISTERS_INFO # %s\n",
XSTRING (DO_REGISTERS_INFO));
fprintf_unfiltered (file,
"mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n",
XSTRING (ECOFF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ELF_MAKE_MSYMBOL_SPECIAL # %s\n",
- XSTRING (ELF_MAKE_MSYMBOL_SPECIAL (SYM, MSYM)));
fprintf_unfiltered (file,
"mips_dump_tdep: FCRCS_REGNUM = %d\n",
FCRCS_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
XSTRING (IGNORE_HELPER_CALL (PC)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: INIT_FRAME_PC # %s\n",
- XSTRING (INIT_FRAME_PC (FROMLEAF, PREV)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: INIT_FRAME_PC_FIRST # %s\n",
- XSTRING (INIT_FRAME_PC_FIRST (FROMLEAF, PREV)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: IN_SIGTRAMP # %s\n",
- XSTRING (IN_SIGTRAMP (PC, NAME)));
fprintf_unfiltered (file,
"mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_SAVED_REGSIZE = %d\n",
MIPS_SAVED_REGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MSYMBOL_IS_SPECIAL = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MSYMBOL_SIZE # %s\n",
- XSTRING (MSYMBOL_SIZE (MSYM)));
fprintf_unfiltered (file,
"mips_dump_tdep: OP_LDFPR = used?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n",
XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P)));
fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P = %d\n",
- SOFTWARE_SINGLE_STEP_P);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P = %d\n",
- SOFTWARE_SINGLE_STEP_P);
+ "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P () = %d\n",
+ SOFTWARE_SINGLE_STEP_P ());
fprintf_unfiltered (file,
"mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n",
XSTRING (STAB_REG_TO_REGNUM (REGNUM)));
fprintf_unfiltered (file,
"mips_dump_tdep: _PROC_MAGIC_ = %d\n",
_PROC_MAGIC_);
+
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: OS ABI = %s\n",
+ gdbarch_osabi_name (tdep->osabi));
}
void
static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
+ mips_abi_string = mips_abi_strings [MIPS_ABI_UNKNOWN];
+ if (MIPS_ABI_LAST + 1
+ != sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
+ internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
+
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
if (!tm_print_insn) /* Someone may have already set it */
tm_print_insn = gdb_print_insn_mips;
&setmipscmdlist),
&showmipscmdlist);
+ /* Allow the user to override the ABI. */
+ c = add_set_enum_cmd
+ ("abi", class_obscure, mips_abi_strings, &mips_abi_string,
+ "Set the ABI used by this program.\n"
+ "This option can be set to one of:\n"
+ " auto - the default ABI associated with the current binary\n"
+ " o32\n"
+ " o64\n"
+ " n32\n"
+ " n64\n"
+ " eabi32\n"
+ " eabi64",
+ &setmipscmdlist);
+ add_show_from_set (c, &showmipscmdlist);
+ set_cmd_sfunc (c, mips_abi_update);
+
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
"Select single-precision MIPS floating-point coprocessor.",
&mipsfpulist);
add_cmd ("double", class_support, set_mipsfpu_double_command,
- "Select double-precision MIPS floating-point coprocessor .",
+ "Select double-precision MIPS floating-point coprocessor.",
&mipsfpulist);
add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
"Show current use of MIPS floating-point coprocessor target.",
&showlist);
-#if !GDB_MULTI_ARCH
- c = add_set_cmd ("processor", class_support, var_string_noescape,
- (char *) &tmp_mips_processor_type,
- "Set the type of MIPS processor in use.\n\
-Set this to be able to access processor-type-specific registers.\n\
-",
- &setlist);
- c->function.cfunc = mips_set_processor_type_command;
- c = add_show_from_set (c, &showlist);
- c->function.cfunc = mips_show_processor_type_command;
-
- tmp_mips_processor_type = strsave (DEFAULT_MIPS_TYPE);
- mips_set_processor_type_command (strsave (DEFAULT_MIPS_TYPE), 0);
-#endif
-
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
&setlist);
/* We need to throw away the frame cache when we set this, since it
might change our ability to get backtraces. */
- c->function.sfunc = reinit_frame_cache_sfunc;
+ set_cmd_sfunc (c, reinit_frame_cache_sfunc);
add_show_from_set (c, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
- c = add_set_auto_boolean_cmd ("mask-address", no_class, &mask_address_var,
- "Set zeroing of upper 32 bits of 64-bit addresses.\n\
-Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to allow GDB to determine\n\
-the correct value.\n",
- &setmipscmdlist);
- add_cmd ("mask-address", no_class, show_mask_address,
- "Show current mask-address value", &showmipscmdlist);
+ add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
+Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
+allow GDB to determine the correct value.\n", "\
+Show zeroing of upper 32 bits of 64-bit addresses.",
+ NULL, show_mask_address,
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
When non-zero, mips specific debugging is enabled.", &setdebuglist),
&showdebuglist);
}
-
projects / thirdparty / binutils-gdb.git / blobdiff