int fixed_p = config->fixed_p;
long size = config->size;
if (args == NULL)
- error ("Argument required (integer, `fixed' or `limited').");
+ error (_("Argument required (integer, `fixed' or `limited')."));
else if (strcmp (args, "hard") == 0
|| strcmp (args, "fixed") == 0)
fixed_p = 1;
char *end;
size = strtoul (args, &end, 0);
if (args == end)
- error ("Invalid %s (bad syntax).", config->name);
+ error (_("Invalid %s (bad syntax)."), config->name);
#if 0
/* Instead of explicitly capping the size of a packet to
MAX_REMOTE_PACKET_SIZE or dissallowing it, the user is
instead allowed to set the size to something arbitrarily
large. */
if (size > MAX_REMOTE_PACKET_SIZE)
- error ("Invalid %s (too large).", config->name);
+ error (_("Invalid %s (too large)."), config->name);
#endif
}
/* Extra checks? */
if (! query ("The target may not be able to correctly handle a %s\n"
"of %ld bytes. Change the packet size? ",
config->name, size))
- error ("Packet size not changed.");
+ error (_("Packet size not changed."));
}
/* Update the config. */
config->fixed_p = fixed_p;
if (config->detect == AUTO_BOOLEAN_AUTO)
/* If the stub previously indicated that the packet was
supported then there is a protocol error.. */
- error ("Protocol error: %s (%s) conflicting enabled responses.",
+ error (_("Protocol error: %s (%s) conflicting enabled responses."),
config->name, config->title);
else
/* The user set it wrong. */
- error ("Enabled packet %s (%s) not recognized by stub",
+ error (_("Enabled packet %s (%s) not recognized by stub"),
config->name, config->title);
break;
case PACKET_SUPPORT_UNKNOWN:
pkt = unpack_threadid (pkt, &ref);
if (mask == 0)
- warning ("Incomplete response to threadinfo request\n");
+ warning (_("Incomplete response to threadinfo request."));
if (!threadmatch (&ref, expectedref))
{ /* This is an answer to a different request. */
- warning ("ERROR RMT Thread info mismatch\n");
+ warning (_("ERROR RMT Thread info mismatch."));
return 0;
}
copy_threadref (&info->threadid, &ref);
pkt = unpack_byte (pkt, &length); /* length */
if (!(tag & mask)) /* Tags out of synch with mask. */
{
- warning ("ERROR RMT: threadinfo tag mismatch\n");
+ warning (_("ERROR RMT: threadinfo tag mismatch."));
retval = 0;
break;
}
{
if (length != 16)
{
- warning ("ERROR RMT: length of threadid is not 16\n");
+ warning (_("ERROR RMT: length of threadid is not 16."));
retval = 0;
break;
}
mask = mask & ~(TAG_EXISTS);
if (length > 8)
{
- warning ("ERROR RMT: 'exists' length too long\n");
+ warning (_("ERROR RMT: 'exists' length too long."));
retval = 0;
break;
}
mask = mask & ~TAG_MOREDISPLAY;
continue;
}
- warning ("ERROR RMT: unknown thread info tag\n");
+ warning (_("ERROR RMT: unknown thread info tag."));
break; /* Not a tag we know about. */
}
return retval;
exit
wait for packet, then exit
*/
- warning ("HMM: threadlist did not echo arg thread, dropping it\n");
+ warning (_("HMM: threadlist did not echo arg thread, dropping it."));
return 0; /* I choose simply exiting. */
}
if (*result_count <= 0)
{
if (*done != 1)
{
- warning ("RMT ERROR : failed to get remote thread list\n");
+ warning (_("RMT ERROR : failed to get remote thread list."));
result = 0;
}
return result; /* break; */
if (*result_count > result_limit)
{
*result_count = 0;
- warning ("RMT ERROR: threadlist response longer than requested\n");
+ warning (_("RMT ERROR: threadlist response longer than requested."));
return 0;
}
return result;
if (loopcount++ > looplimit)
{
result = 0;
- warning ("Remote fetch threadlist -infinite loop-\n");
+ warning (_("Remote fetch threadlist -infinite loop-."));
break;
}
if (!remote_get_threadlist (startflag, &nextthread, MAXTHREADLISTRESULTS,
int tid;
if (remote_desc == 0) /* paranoia */
- error ("Command can only be used when connected to the remote target.");
+ error (_("Command can only be used when connected to the remote target."));
if (use_threadinfo_query)
{
this command. */
if (buf[0] == 'E')
{
- warning ("Remote failure reply: %s", buf);
+ warning (_("Remote failure reply: %s"), buf);
return;
}
lose = 1;
if (lose)
- error ("Malformed response to offset query, %s", buf);
+ error (_("Malformed response to offset query, %s"), buf);
if (symfile_objfile == NULL)
return;
to be. */
if (!udp_warning && strncmp (name, "udp:", 4) == 0)
{
- warning ("The remote protocol may be unreliable over UDP.");
- warning ("Some events may be lost, rendering further debugging "
- "impossible.");
+ warning (_("\
+The remote protocol may be unreliable over UDP.\n\
+Some events may be lost, rendering further debugging impossible."));
udp_warning = 1;
}
struct exception ex;
struct remote_state *rs = get_remote_state ();
if (name == 0)
- error ("To open a remote debug connection, you need to specify what\n"
+ error (_("To open a remote debug connection, you need to specify what\n"
"serial device is attached to the remote system\n"
- "(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).");
+ "(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.)."));
/* See FIXME above. */
if (!async_p)
char *buf = alloca (rs->remote_packet_size);
if (args)
- error ("Argument given to \"detach\" when remotely debugging.");
+ error (_("Argument given to \"detach\" when remotely debugging."));
/* Tell the remote target to detach. */
strcpy (buf, "D");
char *buf = alloca (rs->remote_packet_size);
if (args)
- error ("Argument given to \"detach\" when remotely debugging.");
+ error (_("Argument given to \"detach\" when remotely debugging."));
/* Unregister the file descriptor from the event loop. */
if (target_is_async_p ())
else if (a >= 'A' && a <= 'F')
return a - 'A' + 10;
else
- error ("Reply contains invalid hex digit %d", a);
+ error (_("Reply contains invalid hex digit %d"), a);
}
static int
switch (buf[0])
{
case 'E': /* Error of some sort. */
- warning ("Remote failure reply: %s", buf);
+ warning (_("Remote failure reply: %s"), buf);
continue;
case 'F': /* File-I/O request. */
remote_fileio_request (buf);
{
p1 = (unsigned char *) strchr (p, ':');
if (p1 == NULL)
- warning ("Malformed packet(a) (missing colon): %s\n\
-Packet: '%s'\n",
+ warning (_("Malformed packet(a) (missing colon): %s\n\
+Packet: '%s'\n"),
p, buf);
if (strncmp (p, "thread", p1 - p) == 0)
{
p = p1;
if (*p++ != ':')
- error ("Malformed packet(b) (missing colon): %s\n\
-Packet: '%s'\n",
+ error (_("Malformed packet(b) (missing colon): %s\n\
+Packet: '%s'\n"),
p, buf);
if (reg == NULL)
- error ("Remote sent bad register number %s: %s\n\
-Packet: '%s'\n",
+ error (_("Remote sent bad register number %s: %s\n\
+Packet: '%s'\n"),
phex_nz (pnum, 0), p, buf);
fieldsize = hex2bin (p, regs,
p += 2 * fieldsize;
if (fieldsize < register_size (current_gdbarch,
reg->regnum))
- warning ("Remote reply is too short: %s", buf);
+ warning (_("Remote reply is too short: %s"), buf);
regcache_raw_supply (current_regcache,
reg->regnum, regs);
}
if (*p++ != ';')
- error ("Remote register badly formatted: %s\nhere: %s",
+ error (_("Remote register badly formatted: %s\nhere: %s"),
buf, p);
}
}
}
/* else fallthrough */
default:
- warning ("Invalid remote reply: %s", buf);
+ warning (_("Invalid remote reply: %s"), buf);
continue;
}
}
switch (buf[0])
{
case 'E': /* Error of some sort. */
- warning ("Remote failure reply: %s", buf);
+ warning (_("Remote failure reply: %s"), buf);
continue;
case 'F': /* File-I/O request. */
remote_fileio_request (buf);
{
p1 = (unsigned char *) strchr (p, ':');
if (p1 == NULL)
- error ("Malformed packet(a) (missing colon): %s\n\
-Packet: '%s'\n",
+ error (_("Malformed packet(a) (missing colon): %s\n\
+Packet: '%s'\n"),
p, buf);
if (strncmp (p, "thread", p1 - p) == 0)
{
struct packet_reg *reg = packet_reg_from_pnum (rs, pnum);
p = p1;
if (*p++ != ':')
- error ("Malformed packet(b) (missing colon): %s\n\
-Packet: '%s'\n",
+ error (_("Malformed packet(b) (missing colon): %s\n\
+Packet: '%s'\n"),
p, buf);
if (reg == NULL)
- error ("Remote sent bad register number %ld: %s\n\
-Packet: '%s'\n",
+ error (_("Remote sent bad register number %ld: %s\n\
+Packet: '%s'\n"),
pnum, p, buf);
fieldsize = hex2bin (p, regs,
p += 2 * fieldsize;
if (fieldsize < register_size (current_gdbarch,
reg->regnum))
- warning ("Remote reply is too short: %s", buf);
+ warning (_("Remote reply is too short: %s"), buf);
regcache_raw_supply (current_regcache, reg->regnum, regs);
}
if (*p++ != ';')
- error ("Remote register badly formatted: %s\nhere: %s",
+ error (_("Remote register badly formatted: %s\nhere: %s"),
buf, p);
}
}
}
/* else fallthrough */
default:
- warning ("Invalid remote reply: %s", buf);
+ warning (_("Invalid remote reply: %s"), buf);
continue;
}
}
{
if (p[1] == 0)
{
- error ("fetch_register_using_p: early buf termination");
+ error (_("fetch_register_using_p: early buf termination"));
return 0;
}
if (fetch_register_using_p (regnum))
return;
else
- error ("Protocol error: p packet not recognized by stub");
+ error (_("Protocol error: p packet not recognized by stub"));
case PACKET_SUPPORT_UNKNOWN:
if (fetch_register_using_p (regnum))
{
break;
if (p[1] == 0)
{
- warning ("Remote reply is of odd length: %s", buf);
+ warning (_("Remote reply is of odd length: %s"), buf);
/* Don't change register_bytes_found in this case, and don't
print a second warning. */
goto supply_them;
register_bytes_found = i;
if (REGISTER_BYTES_OK_P ()
&& !REGISTER_BYTES_OK (i))
- warning ("Remote reply is too short: %s", buf);
+ warning (_("Remote reply is too short: %s"), buf);
}
supply_them:
if (store_register_using_P (regnum))
return;
else
- error ("Protocol error: P packet not recognized by stub");
+ error (_("Protocol error: P packet not recognized by stub"));
case PACKET_SUPPORT_UNKNOWN:
if (store_register_using_P (regnum))
{
{
case SERIAL_EOF:
target_mourn_inferior ();
- error ("Remote connection closed");
+ error (_("Remote connection closed"));
/* no return */
case SERIAL_ERROR:
perror_with_name ("Remote communication error");
getpkt (buf, sizeof_buf, 0);
if (buf[0] == 'E')
- error ("Remote failure reply: %s", buf);
+ error (_("Remote failure reply: %s"), buf);
}
/* Display a null-terminated packet on stdout, for debugging, using C
{
QUIT;
target_mourn_inferior ();
- error ("Watchdog has expired. Target detached.\n");
+ error (_("Watchdog has expired. Target detached."));
}
if (remote_debug)
fputs_filtered ("Timed out.\n", gdb_stdlog);
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (remote_protocol_Z[packet].support == PACKET_DISABLE)
- error ("Can't set hardware watchpoints without the '%s' (%s) packet\n",
+ error (_("Can't set hardware watchpoints without the '%s' (%s) packet."),
remote_protocol_Z[packet].name,
remote_protocol_Z[packet].title);
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (remote_protocol_Z[packet].support == PACKET_DISABLE)
- error ("Can't clear hardware watchpoints without the '%s' (%s) packet\n",
+ error (_("Can't clear hardware watchpoints without the '%s' (%s) packet."),
remote_protocol_Z[packet].name,
remote_protocol_Z[packet].title);
BREAKPOINT_FROM_PC (&addr, &len);
if (remote_protocol_Z[Z_PACKET_HARDWARE_BP].support == PACKET_DISABLE)
- error ("Can't set hardware breakpoint without the '%s' (%s) packet\n",
+ error (_("Can't set hardware breakpoint without the '%s' (%s) packet."),
remote_protocol_Z[Z_PACKET_HARDWARE_BP].name,
remote_protocol_Z[Z_PACKET_HARDWARE_BP].title);
BREAKPOINT_FROM_PC (&addr, &len);
if (remote_protocol_Z[Z_PACKET_HARDWARE_BP].support == PACKET_DISABLE)
- error ("Can't clear hardware breakpoint without the '%s' (%s) packet\n",
+ error (_("Can't clear hardware breakpoint without the '%s' (%s) packet."),
remote_protocol_Z[Z_PACKET_HARDWARE_BP].name,
remote_protocol_Z[Z_PACKET_HARDWARE_BP].title);
int mismatched = 0;
if (!exec_bfd)
- error ("command cannot be used without an exec file");
+ error (_("command cannot be used without an exec file"));
if (!current_target.to_shortname ||
strcmp (current_target.to_shortname, "remote") != 0)
- error ("command can only be used with remote target");
+ error (_("command can only be used with remote target"));
for (s = exec_bfd->sections; s; s = s->next)
{
getpkt (buf, (rs->remote_packet_size), 0);
if (buf[0] == 'E')
- error ("target memory fault, section %s, range 0x%s -- 0x%s",
+ error (_("target memory fault, section %s, range 0x%s -- 0x%s"),
sectname, paddr (lma), paddr (lma + size));
if (buf[0] != 'C')
- error ("remote target does not support this operation");
+ error (_("remote target does not support this operation"));
for (target_crc = 0, tmp = &buf[1]; *tmp; tmp++)
target_crc = target_crc * 16 + fromhex (*tmp);
do_cleanups (old_chain);
}
if (mismatched > 0)
- warning ("One or more sections of the remote executable does not match\n\
-the loaded file\n");
+ warning (_("One or more sections of the remote executable does not match\n\
+the loaded file\n"));
if (args && !matched)
printf_filtered ("No loaded section named '%s'.\n", args);
}
/* Except for querying the minimum buffer size, target must be open. */
if (!remote_desc)
- error ("remote query is only available after target open");
+ error (_("remote query is only available after target open"));
gdb_assert (annex != NULL);
gdb_assert (readbuf != NULL);
char *p = buf;
if (!remote_desc)
- error ("remote rcmd is only available after target open");
+ error (_("remote rcmd is only available after target open"));
/* Send a NULL command across as an empty command. */
if (command == NULL)
p = strchr (buf, '\0');
if ((strlen (buf) + strlen (command) * 2 + 8/*misc*/) > (rs->remote_packet_size))
- error ("\"monitor\" command ``%s'' is too long\n", command);
+ error (_("\"monitor\" command ``%s'' is too long."), command);
/* Encode the actual command. */
bin2hex (command, p, 0);
if (putpkt (buf) < 0)
- error ("Communication problem with target\n");
+ error (_("Communication problem with target."));
/* get/display the response */
while (1)
buf[0] = '\0';
getpkt (buf, (rs->remote_packet_size), 0);
if (buf[0] == '\0')
- error ("Target does not support this command\n");
+ error (_("Target does not support this command."));
if (buf[0] == 'O' && buf[1] != 'K')
{
remote_console_output (buf + 1); /* 'O' message from stub. */
if (strlen (buf) == 3 && buf[0] == 'E'
&& isdigit (buf[1]) && isdigit (buf[2]))
{
- error ("Protocol error with Rcmd");
+ error (_("Protocol error with Rcmd"));
}
for (p = buf; p[0] != '\0' && p[1] != '\0'; p += 2)
{
char *buf = alloca (rs->remote_packet_size);
if (!remote_desc)
- error ("command can only be used with remote target");
+ error (_("command can only be used with remote target"));
if (!args)
- error ("remote-packet command requires packet text as argument");
+ error (_("remote-packet command requires packet text as argument"));
puts_filtered ("sending: ");
print_packet (args);
projects / thirdparty / binutils-gdb.git / blobdiff