-# Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+# Copyright 1992-2018 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Fred Fish. (fnf@cygnus.com)
-if $tracelevel then {
- strace $tracelevel
-}
-
-set prms_id 0
-set bug_id 0
# are we on a target board
if ![isnative] then {
return
}
+standard_testfile coremaker.c
-set binfile "coremaker"
-set srcfile $binfile.c
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info] {
+ return -1
+}
-if ![file exists $objdir/$subdir/$binfile] then {
- perror "$objdir/$subdir/$binfile does not exist."
- return 0
+if {[build_executable $testfile.exp $testfile $srcfile debug] == -1} {
+ untested "failed to compile"
+ return -1
}
-if ![file exists $objdir/$subdir/corefile] then {
- # Create a core file named "corefile" rather than just "core", to
- # avoid problems with sys admin types that like to regularly prune all
- # files named "core" from the system.
- #
- # Some systems append "core" to the name of the program; others append
- # the name of the program to "core".
-
- catch "system \"cd $objdir/$subdir; ./$binfile\""
- if [file exists $objdir/$subdir/core] then {
- catch "exec mv $objdir/$subdir/core $objdir/$subdir/corefile"
- } elseif [file exists $objdir/$subdir/core.$binfile] {
- catch "exec mv $objdir/$subdir/core.$binfile $objdir/$subdir/corefile"
- } elseif [file exists $objdir/$subdir/$binfile.core] {
- catch "exec mv $objdir/$subdir/$binfile.core $objdir/$subdir/corefile"
- } else {
- warning "can't generate a core file - core tests suppressed - check ulimit -c"
- return 0
- }
+set corefile [core_find $binfile {coremmap.data}]
+if {$corefile == ""} {
+ return 0
}
-#
-# Test that we can simply startup with a "-core=corefile" command line arg
+# Test that we can simply startup with a "-core=$corefile" command line arg
# and recognize that the core file is a valid, usable core file.
# To do this, we must shutdown the currently running gdb and restart
# with the -core args. We can't use gdb_start because it looks for
# the first gdb prompt, and the message we are looking for occurs
-# before the first prompt. Also, we can't include GDBFLAGS because
-# if it is empty, this confuses gdb with an empty argument that it
-# grumbles about (said grumbling currently being ignored in gdb_start).
-# **FIXME**
+# before the first prompt.
#
+# Another problem is that on some systems (solaris for example), there
+# is apparently a limit on the length of a fully specified path to
+# the corefile executable, at about 80 chars. For this case, consider
+# it a pass, but note that the program name is bad.
gdb_exit
if $verbose>1 then {
- send_user "Spawning $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile\n"
+ send_user "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS -core=$corefile\n"
}
-# The RS/6000 and powerpc gdb doesn't know how to extract the file name and
-# terminating signal from the core file, so all these tests are
-# expected to fail.
-
-setup_xfail "rs6000-*-*"
-setup_xfail "powerpc-*-*"
set oldtimeout $timeout
set timeout [expr "$timeout + 60"]
-eval "spawn $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile"
+verbose "Timeout is now $timeout seconds" 2
+eval "spawn $GDB $INTERNAL_GDBFLAGS $GDBFLAGS -core=$corefile"
expect {
- -re "Core was generated by .*coremaker.*\r
-\#0 .*\(\).*\r
-$prompt $" { pass "args: -core=corefile" }
- -re ".*$prompt $" { fail "args: -core=corefile" }
- timeout { fail "(timeout) starting with -core" }
+ -re "Couldn't find .* registers in core file.*$gdb_prompt $" {
+ fail "args: -core=[file tail $corefile] (couldn't find regs)"
+ }
+ -re "Core was generated by .*corefile.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "args: -core=[file tail $corefile]"
+ }
+ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "args: -core=[file tail $corefile] (with bad program name)"
+ }
+ -re ".*registers from core file: File in wrong format.* $" {
+ fail "args: -core=[file tail $corefile] (could not read registers from core file)"
+ }
+ -re ".*$gdb_prompt $" { fail "args: -core=[file tail $corefile]" }
+ timeout { fail "(timeout) starting with -core" }
}
# See previous comments above, they are still applicable.
#
-gdb_exit
+close
+
if $verbose>1 then {
- send_user "Spawning $GDB -nw $GDBFLAGS $objdir/$subdir/$binfile -core=$objdir/$subdir/corefile\n"
+ send_user "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS $binfile -core=$corefile\n"
}
-setup_xfail "rs6000-*-*"
-setup_xfail "powerpc-*-*"
-# This fails in p3, but not in devo.
-spawn $GDB -nw $GDBFLAGS $objdir/$subdir/$binfile -core=$objdir/$subdir/corefile
+eval "spawn $GDB $INTERNAL_GDBFLAGS $GDBFLAGS $binfile -core=$corefile"
expect {
- -re "Core was generated by .*coremaker.*\r
-\#0 .*\(\).*\r
-$prompt $" { pass "args: execfile -core=corefile" }
- -re ".*$prompt $" { fail "args: execfile -core=corefile" }
- timeout { fail "(timeout) starting with -core" }
+ -re "Core was generated by .*corefile.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "args: execfile -core=[file tail $corefile]"
+ }
+ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "args: execfile -core=[file tail $corefile] (with bad program name)"
+ }
+ -re ".*registers from core file: File in wrong format.* $" {
+ fail "args: execfile -core=[file tail $corefile] (could not read registers from core file)"
+ }
+ -re ".*$gdb_prompt $" { fail "args: execfile -core=[file tail $corefile]" }
+ timeout { fail "(timeout) starting with -core" }
}
set timeout $oldtimeout
+verbose "Timeout is now $timeout seconds" 2
+close
# Now restart normally.
-gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
-gdb_load $objdir/$subdir/$binfile
+gdb_load ${binfile}
# Test basic corefile recognition via core-file command.
-setup_xfail "rs6000-*-*"
-setup_xfail "powerpc-*-*"
-send "core-file $objdir/$subdir/corefile\n"
-expect {
- -re "Core was generated by .*coremaker.*\r
-\#0 .*\(\).*\r
-$prompt $" { pass "core-file command" }
- -re ".*$prompt $" { fail "core-file command" }
- timeout { fail "(timeout) core-file command" }
+gdb_test_multiple "core-file $corefile" "core-file command" {
+ -re ".* program is being debugged already.*y or n. $" {
+ # gdb_load may connect us to a gdbserver.
+ send_gdb "y\n"
+ exp_continue
+ }
+ -re "Core was generated by .*corefile.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "core-file command"
+ }
+ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "core-file command (with bad program name)"
+ }
+ -re ".*registers from core file: File in wrong format.* $" {
+ fail "core-file command (could not read registers from core file)"
+ }
}
+# Test correct mapping of corefile sections by printing some variables.
+
+gdb_test "print coremaker_data" "\\\$$decimal = 202"
+gdb_test "print coremaker_bss" "\\\$$decimal = 10"
+gdb_test "print coremaker_ro" "\\\$$decimal = 201"
+
+gdb_test "print func2::coremaker_local" "\\\$$decimal = \\{0, 1, 2, 3, 4\\}"
+
+# Test the presence and the correct values of $_exitsignal and
+# $_exitcode variables. The corefile is generated with a SIGABRT,
+# which is "6" in the Linux kernel.
+
+gdb_test "print \$_exitsignal" " = 6" \
+ "\$_exitsignal prints SIGABRT (6)"
+
+gdb_test "print \$_exitcode" " = void" \
+ "\$_exitcode is void"
+
# Somehow we better test the ability to read the registers out of the core
# file correctly. I don't think the other tests do this.
-# Haven't investigated this xfail
-setup_xfail "m68k-*-hpux*" "i*86-*-linux*" "i*86-*-sysv4*"
gdb_test "bt" "abort.*func2.*func1.*main.*" "backtrace in corefile.exp"
+gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up in corefile.exp"
+
+# Test ability to read mmap'd data
+
+gdb_test "x/8bd buf1" ".*:.*0.*1.*2.*3.*4.*5.*6.*7" "accessing original mmap data in core file"
+setup_xfail "*-*-sunos*" "*-*-aix*"
+set test "accessing mmapped data in core file"
+gdb_test_multiple "x/8bd buf2" "$test" {
+ -re ".*:.*0.*1.*2.*3.*4.*5.*6.*7.*$gdb_prompt $" {
+ pass "$test"
+ }
+ -re "0x\[f\]*:.*Cannot access memory at address 0x\[f\]*.*$gdb_prompt $" {
+ fail "$test (mapping failed at runtime)"
+ }
+ -re "0x.*:.*Cannot access memory at address 0x.*$gdb_prompt $" {
+ fail "$test (mapping address not found in core file)"
+ }
+}
# test reinit_frame_cache
-gdb_load $objdir/$subdir/$binfile
-setup_xfail "*-*-*"
-gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(\\)" "up in corefile.exp"
+gdb_load ${binfile}
+gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up in corefile.exp (reinit)"
gdb_test "core" "No core file now."
+
+
+# Test a run (start) command will clear any loaded core file.
+
+proc corefile_test_run {} {
+ global corefile gdb_prompt
+
+ # This test is trying to check whether the "run" command finds the
+ # default run target when already debugging a core, so it would
+ # fail on boards that set auto-connect-native-target off. Since
+ # there's no real point in running the test but with the native
+ # target, it's easier to just skip elsewhere.
+ if {[target_info gdb_protocol] != ""} {
+ return
+ }
+
+ gdb_test "core-file $corefile" "Core was generated by .*" "run: load core again"
+ gdb_test "info files" "\r\nLocal core dump file:\r\n.*" "run: sanity check we see the core file"
+
+ set test "run: with core"
+ if [runto_main] {
+ pass $test
+ } else {
+ fail $test
+ }
+
+ set test "run: core file is cleared"
+ gdb_test_multiple "info files" $test {
+ -re "\r\nLocal core dump file:\r\n.*\r\n$gdb_prompt $" {
+ fail $test
+ }
+ -re "\r\n$gdb_prompt $" {
+ pass $test
+ }
+ }
+
+ set test "quit with a process"
+ gdb_test_multiple "quit" $test {
+ -re "A debugging session is active.\r\n.*\r\nQuit anyway\\? \\(y or n\\) $" {
+ pass $test
+ gdb_test "n" {Not confirmed\.} "quit with processes: n"
+ }
+ }
+
+ gdb_exit
+}
+
+corefile_test_run
+
+# Verify there is no question if only a core file is loaded.
+
+gdb_start
+gdb_test "core-file $corefile" "Core was generated by .*" "no question: load core"
+
+set test "quit with a core file"
+gdb_test_multiple "quit" $test {
+ -re "A debugging session is active.\r\n.*\r\nQuit anyway\\? \\(y or n\\) $" {
+ fail $test
+ gdb_test "n" {Not confirmed\.} "quit with processes: n"
+ }
+ eof {
+ pass $test
+ }
+}
+
+gdb_exit
+
+# Test an attach command will clear any loaded core file.
+
+proc corefile_test_attach {} {
+ global binfile corefile gdb_prompt
+
+ # This test is checking whether the "attach" command finds the
+ # default run target when already debugging a core, so it would
+ # fail on boards that set auto-connect-native-target off. Since
+ # there's no real point in running the test but with the native
+ # target, it's easier to just skip elsewhere.
+ if {[target_info gdb_protocol] != ""} {
+ return
+ }
+
+ if [can_spawn_for_attach] {
+ set test "attach: spawn sleep"
+ set res [remote_spawn host "$binfile sleep"]
+ if { $res < 0 || $res == "" } {
+ fail $test
+ return
+ }
+ set pid [exp_pid -i $res]
+ # We don't care whether the program is still in the startup phase when we
+ # attach.
+
+ gdb_start
+
+ gdb_test "core-file $corefile" "Core was generated by .*" "attach: load core again"
+ gdb_test "info files" "\r\nLocal core dump file:\r\n.*" "attach: sanity check we see the core file"
+
+ gdb_test "attach $pid" "Attaching to process $pid\r\n.*" "attach: with core"
+
+ set test "attach: core file is cleared"
+ gdb_test_multiple "info files" $test {
+ -re "\r\nLocal core dump file:\r\n.*\r\n$gdb_prompt $" {
+ fail $test
+ }
+ -re "\r\n$gdb_prompt $" {
+ pass $test
+ }
+ }
+
+ gdb_exit
+ }
+}
+
+corefile_test_attach
+
+# Test warning-free core file load. E.g., a Linux vDSO used to
+# trigger this warning:
+# warning: Can't read pathname for load map: Input/output error.
+
+clean_restart ${testfile}
+
+set test "core-file warning-free"
+gdb_test_multiple "core-file $corefile" $test {
+ -re "warning: .*\r\n.*\r\n$gdb_prompt $" {
+ fail $test
+ }
+ -re "\r\n$gdb_prompt $" {
+ pass $test
+ }
+}
projects / thirdparty / binutils-gdb.git / blobdiff