/* Xtensa ELF support for BFD.
- Copyright 2003 Free Software Foundation, Inc.
+ Copyright 2003, 2004 Free Software Foundation, Inc.
Contributed by Bob Wilson (bwilson@tensilica.com) at Tensilica.
This file is part of BFD, the Binary File Descriptor library.
RELOC_NUMBER (R_XTENSA_ASM_SIMPLIFY, 12)
RELOC_NUMBER (R_XTENSA_GNU_VTINHERIT, 15)
RELOC_NUMBER (R_XTENSA_GNU_VTENTRY, 16)
+ RELOC_NUMBER (R_XTENSA_DIFF8, 17)
+ RELOC_NUMBER (R_XTENSA_DIFF16, 18)
+ RELOC_NUMBER (R_XTENSA_DIFF32, 19)
+ RELOC_NUMBER (R_XTENSA_SLOT0_OP, 20)
+ RELOC_NUMBER (R_XTENSA_SLOT1_OP, 21)
+ RELOC_NUMBER (R_XTENSA_SLOT2_OP, 22)
+ RELOC_NUMBER (R_XTENSA_SLOT3_OP, 23)
+ RELOC_NUMBER (R_XTENSA_SLOT4_OP, 24)
+ RELOC_NUMBER (R_XTENSA_SLOT5_OP, 25)
+ RELOC_NUMBER (R_XTENSA_SLOT6_OP, 26)
+ RELOC_NUMBER (R_XTENSA_SLOT7_OP, 27)
+ RELOC_NUMBER (R_XTENSA_SLOT8_OP, 28)
+ RELOC_NUMBER (R_XTENSA_SLOT9_OP, 29)
+ RELOC_NUMBER (R_XTENSA_SLOT10_OP, 30)
+ RELOC_NUMBER (R_XTENSA_SLOT11_OP, 31)
+ RELOC_NUMBER (R_XTENSA_SLOT12_OP, 32)
+ RELOC_NUMBER (R_XTENSA_SLOT13_OP, 33)
+ RELOC_NUMBER (R_XTENSA_SLOT14_OP, 34)
+ RELOC_NUMBER (R_XTENSA_SLOT0_ALT, 35)
+ RELOC_NUMBER (R_XTENSA_SLOT1_ALT, 36)
+ RELOC_NUMBER (R_XTENSA_SLOT2_ALT, 37)
+ RELOC_NUMBER (R_XTENSA_SLOT3_ALT, 38)
+ RELOC_NUMBER (R_XTENSA_SLOT4_ALT, 39)
+ RELOC_NUMBER (R_XTENSA_SLOT5_ALT, 40)
+ RELOC_NUMBER (R_XTENSA_SLOT6_ALT, 41)
+ RELOC_NUMBER (R_XTENSA_SLOT7_ALT, 42)
+ RELOC_NUMBER (R_XTENSA_SLOT8_ALT, 43)
+ RELOC_NUMBER (R_XTENSA_SLOT9_ALT, 44)
+ RELOC_NUMBER (R_XTENSA_SLOT10_ALT, 45)
+ RELOC_NUMBER (R_XTENSA_SLOT11_ALT, 46)
+ RELOC_NUMBER (R_XTENSA_SLOT12_ALT, 47)
+ RELOC_NUMBER (R_XTENSA_SLOT13_ALT, 48)
+ RELOC_NUMBER (R_XTENSA_SLOT14_ALT, 49)
END_RELOC_NUMBERS (R_XTENSA_max)
/* Processor-specific flags for the ELF header e_flags field. */
#define XTENSA_INSN_SEC_NAME ".xt.insn"
#define XTENSA_LIT_SEC_NAME ".xt.lit"
+#define XTENSA_PROP_SEC_NAME ".xt.prop"
typedef struct property_table_entry_t
{
bfd_vma address;
bfd_vma size;
+ flagword flags;
} property_table_entry;
+/* Flags in the property tables to specify whether blocks of memory are
+ literals, instructions, data, or unreachable. For instructions,
+ blocks that begin loop targets and branch targets are designated.
+ Blocks that do not allow density instructions, instruction reordering
+ or transformation are also specified. Finally, for branch targets,
+ branch target alignment priority is included. Alignment of the next
+ block is specified in the current block and the size of the current
+ block does not include any fill required to align to the next
+ block. */
+
+#define XTENSA_PROP_LITERAL 0x00000001
+#define XTENSA_PROP_INSN 0x00000002
+#define XTENSA_PROP_DATA 0x00000004
+#define XTENSA_PROP_UNREACHABLE 0x00000008
+/* Instruction-only properties at beginning of code. */
+#define XTENSA_PROP_INSN_LOOP_TARGET 0x00000010
+#define XTENSA_PROP_INSN_BRANCH_TARGET 0x00000020
+/* Instruction-only properties about code. */
+#define XTENSA_PROP_INSN_NO_DENSITY 0x00000040
+#define XTENSA_PROP_INSN_NO_REORDER 0x00000080
+#define XTENSA_PROP_INSN_NO_TRANSFORM 0x00000100
+
+/* Branch target alignment information. This transmits information
+ to the linker optimization about the priority of aligning a
+ particular block for branch target alignment: None, low priority,
+ high priority, or required. These only need to be checked in
+ instruction blocks marked as XTENSA_PROP_INSN_BRANCH_TARGET.
+ Common usage is:
+
+ switch (GET_XTENSA_PROP_BT_ALIGN(flags))
+ case XTENSA_PROP_BT_ALIGN_NONE:
+ case XTENSA_PROP_BT_ALIGN_LOW:
+ case XTENSA_PROP_BT_ALIGN_HIGH:
+ case XTENSA_PROP_BT_ALIGN_REQUIRE:
+*/
+#define XTENSA_PROP_BT_ALIGN_MASK 0x00000600
+
+/* No branch target alignment. */
+#define XTENSA_PROP_BT_ALIGN_NONE 0x0
+/* Low priority branch target alignment. */
+#define XTENSA_PROP_BT_ALIGN_LOW 0x1
+/* High priority branch target alignment. */
+#define XTENSA_PROP_BT_ALIGN_HIGH 0x2
+/* Required branch target alignment. */
+#define XTENSA_PROP_BT_ALIGN_REQUIRE 0x3
+
+#define GET_XTENSA_PROP_BT_ALIGN(flag) \
+ (((unsigned)((flag) & (XTENSA_PROP_BT_ALIGN_MASK))) >> 9)
+#define SET_XTENSA_PROP_BT_ALIGN(flag, align) \
+ (((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \
+ (((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK))
+
+/* Alignment is specified in the block BEFORE the one that needs
+ alignment. Up to 5 bits. Use GET_XTENSA_PROP_ALIGNMENT(flags) to
+ get the required alignment specified as a power of 2. Use
+ SET_XTENSA_PROP_ALIGNMENT(flags, pow2) to set the required
+ alignment. Be careful of side effects since the SET will evaluate
+ flags twice. Also, note that the SIZE of a block in the property
+ table does not include the alignment size, so the alignment fill
+ must be calculated to determine if two blocks are contiguous.
+ TEXT_ALIGN is not currently implemented but is a placeholder for a
+ possible future implementation. */
+
+#define XTENSA_PROP_ALIGN 0x00000800
+
+#define XTENSA_PROP_ALIGNMENT_MASK 0x0001f000
+
+#define GET_XTENSA_PROP_ALIGNMENT(flag) \
+ (((unsigned)((flag) & (XTENSA_PROP_ALIGNMENT_MASK))) >> 12)
+#define SET_XTENSA_PROP_ALIGNMENT(flag, align) \
+ (((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \
+ (((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK))
+
+#define XTENSA_PROP_INSN_ABSLIT 0x00020000
+
#endif /* _ELF_XTENSA_H */
projects / thirdparty / binutils-gdb.git / blobdiff