+# Copyright (C) 2014-2023 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.
#
# Unusual variables checked by this code:
# NOP - four byte opcode for no-op (defaults to 0)
# OTHER_TEXT_SECTIONS - these get put in .text when relocating
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
-# OTHER_BSS_SECTIONS - other than .bss .sbss ...
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
# DATA_PLT - .plt should be in data segment, not text segment.
# BSS_PLT - .plt should be in bss segment
# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-# EMBEDDED - whether this is for an embedded system.
+# EMBEDDED - whether this is for an embedded system.
# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
# start address of shared library.
# INPUT_FILES - INPUT command of files to always include
# WRITABLE_RODATA - if set, the .rodata section should be writable
# INIT_START, INIT_END - statements just before and just after
-# combination of .init sections.
+# combination of .init sections.
# FINI_START, FINI_END - statements just before and just after
-# combination of .fini sections.
+# combination of .fini sections.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"
SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"
SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"
-CTOR=".ctors ${CONSTRUCTING-0} :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
+ the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
-# if this is for an embedded system, don't add SIZEOF_HEADERS.
+# If this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
fi
cat <<EOF
+/* Copyright (C) 2014-2023 Free Software Foundation, Inc.
+
+ Copying and distribution of this script, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. */
+
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
"${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
-ENTRY(${ENTRY})
+${RELOCATING+ENTRY(${ENTRY})}
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
${RELOCATING+*(.rela.gnu.linkonce.s.*)}
}
.rel.sbss ${RELOCATING-0} :
- {
+ {
*(.rel.sbss)
${RELOCATING+*(.rel.sbss.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
${RELOCATING+*(.rela.sbss.*)}
${RELOCATING+*(.rela.gnu.linkonce.sb.*)}
}
- .rel.sdata2 ${RELOCATING-0} :
- {
+ .rel.sdata2 ${RELOCATING-0} :
+ {
*(.rel.sdata2)
${RELOCATING+*(.rel.sdata2.*)}
${RELOCATING+*(.rel.gnu.linkonce.s2.*)}
}
- .rela.sdata2 ${RELOCATING-0} :
+ .rela.sdata2 ${RELOCATING-0} :
{
*(.rela.sdata2)
${RELOCATING+*(.rela.sdata2.*)}
${RELOCATING+*(.rela.gnu.linkonce.s2.*)}
}
- .rel.sbss2 ${RELOCATING-0} :
- {
- *(.rel.sbss2)
+ .rel.sbss2 ${RELOCATING-0} :
+ {
+ *(.rel.sbss2)
${RELOCATING+*(.rel.sbss2.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb2.*)}
}
- .rela.sbss2 ${RELOCATING-0} :
- {
- *(.rela.sbss2)
+ .rela.sbss2 ${RELOCATING-0} :
+ {
+ *(.rela.sbss2)
${RELOCATING+*(.rela.sbss2.*)}
${RELOCATING+*(.rela.gnu.linkonce.sb2.*)}
}
- .rel.bss ${RELOCATING-0} :
- {
+ .rel.bss ${RELOCATING-0} :
+ {
*(.rel.bss)
${RELOCATING+*(.rel.bss.*)}
${RELOCATING+*(.rel.gnu.linkonce.b.*)}
}
- .rela.bss ${RELOCATING-0} :
- {
+ .rela.bss ${RELOCATING-0} :
+ {
*(.rela.bss)
${RELOCATING+*(.rela.bss.*)}
${RELOCATING+*(.rela.gnu.linkonce.b.*)}
.rel.dyn :
{
EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
cat <<EOF
}
.rela.dyn :
{
EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
cat <<EOF
}
EOF
.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
- .init ${RELOCATING-0} :
- {
+ .init ${RELOCATING-0} :
+ {
${RELOCATING+${INIT_START}}
- KEEP (*(.init))
+ KEEP (*(SORT_NONE(.init)))
${RELOCATING+${INIT_END}}
} =${NOP-0}
*(.text)
${RELOCATING+*(.text.*)}
*(.stub)
- /* .gnu.warning sections are handled specially by elf32.em. */
+ /* .gnu.warning sections are handled specially by elf.em. */
*(.gnu.warning)
${RELOCATING+*(.gnu.linkonce.t.*)}
${RELOCATING+${OTHER_TEXT_SECTIONS}}
.fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
- KEEP (*(.fini))
+ KEEP (*(SORT_NONE(.fini)))
${RELOCATING+${FINI_END}}
} =${NOP-0}
${RELOCATING+PROVIDE (__etext = .);}
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
.data1 ${RELOCATING-0} : { *(.data1) }
- .eh_frame ${RELOCATING-0} :
- {
+ .eh_frame ${RELOCATING-0} :
+ {
${RELOCATING+PROVIDE (__eh_frame_begin = .);}
- *(.eh_frame)
- LONG (0);
+ *(.eh_frame)
+ ${RELOCATING+LONG (0);}
${RELOCATING+PROVIDE (__eh_frame_end = .);}
- } ${RELOCATING+}
+ }
.gcc_except_table : { *(.gcc_except_table) }
${INITIAL_READONLY_SECTIONS}
.hash ${RELOCATING-0} : { *(.hash) }
.jcr : { KEEP (*(.jcr)) }
${DATA_PLT+${PLT}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
- .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
+ .got ${RELOCATING-0} : {${RELOCATING+ *(.got.plt)} *(.got) }
${RELOCATING+${OTHER_GOT_SECTIONS}}
${CREATE_SHLIB+${SDATA2}}
${CREATE_SHLIB+${SBSS2}}
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata ${RELOCATING-0} :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
- *(.sdata)
+ *(.sdata)
${RELOCATING+*(.sdata.*)}
${RELOCATING+*(.gnu.linkonce.s.*)}
}
${RELOCATING+${OTHER_SDATA_SECTIONS}}
${RELOCATING+_edata = .;}
${RELOCATING+PROVIDE (edata = .);}
+ ${RELOCATING+. = ALIGN(ALIGNOF(NEXT_SECTION));}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
.sbss ${RELOCATING-0} :
{
${RELOCATING+PROVIDE (__sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_start = .);}
- *(.dynsbss)
+ ${RELOCATING+*(.dynsbss)}
*(.sbss)
${RELOCATING+*(.sbss.*)}
${RELOCATING+*(.gnu.linkonce.sb.*)}
- *(.scommon)
+ ${RELOCATING+*(.scommon)}
${RELOCATING+PROVIDE (__sbss_end = .);}
${RELOCATING+PROVIDE (___sbss_end = .);}
}
${BSS_PLT+${PLT}}
.bss ${RELOCATING-0} :
{
- *(.dynbss)
+ ${RELOCATING+*(.dynbss)}
*(.bss)
${RELOCATING+*(.bss.*)}
${RELOCATING+*(.gnu.linkonce.b.*)}
- *(COMMON)
+ ${RELOCATING+*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ . = ALIGN(${ALIGNMENT});}
}
- ${RELOCATING+${OTHER_BSS_SECTIONS}}
+ ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ ${RELOCATING+${OTHER_END_SYMBOLS}}
${RELOCATING+_end = .;}
- ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
${RELOCATING+PROVIDE (end = .);}
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
-
- .comment 0 : { *(.comment) }
-
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
-
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
-
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
-
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
-
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
+EOF
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
+source_sh $srcdir/scripttempl/misc-sections.sc
+source_sh $srcdir/scripttempl/DWARF.sc
+cat <<EOF
${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
/* These must appear regardless of ${RELOCATING}. */