+# Copyright (C) 2014-2023 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.
#
# Unusual variables checked by this code:
# NOP - four byte opcode for no-op (defaults to 0)
# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
# BSS_PLT - .plt should be in bss segment
# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-# EMBEDDED - whether this is for an embedded system.
+# EMBEDDED - whether this is for an embedded system.
# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
# start address of shared library.
# INPUT_FILES - INPUT command of files to always include
# WRITABLE_RODATA - if set, the .rodata section should be writable
# INIT_START, INIT_END - statements just before and just after
-# combination of .init sections.
+# combination of .init sections.
# FINI_START, FINI_END - statements just before and just after
-# combination of .fini sections.
+# combination of .fini sections.
# STACK_ADDR - start of a .stack section.
# OTHER_END_SYMBOLS - symbols to place right at the end of the script.
# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
if test -z "$GOT"; then
if test -z "$SEPARATE_GOTPLT"; then
- GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
+ GOT=".got ${RELOCATING-0} : {${RELOCATING+ *(.got.plt)} *(.got) }"
else
GOT=".got ${RELOCATING-0} : { *(.got) }"
GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
${RELOCATING+PROVIDE (__sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_start = .);}
${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
- *(.dynsbss)
+ ${RELOCATING+*(.dynsbss)}
*(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
- *(.scommon)
+ ${RELOCATING+*(.scommon)}
${RELOCATING+PROVIDE (__sbss_end = .);}
${RELOCATING+PROVIDE (___sbss_end = .);}
}"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata ${RELOCATING-0} :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
NO_SMALL_DATA=" "
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
-CTOR=".ctors ${CONSTRUCTING-0} :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
*(.stack)
}"
-# if this is for an embedded system, don't add SIZEOF_HEADERS.
+# If this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
fi
cat <<EOF
+/* Copyright (C) 2014-2023 Free Software Foundation, Inc.
+
+ Copying and distribution of this script, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. */
+
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
"${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
.rel.dyn ${RELOCATING-0} :
{
EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
cat <<EOF
}
.rela.dyn ${RELOCATING-0} :
{
EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
cat <<EOF
}
EOF
.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
- .init ${RELOCATING-0} :
- {
+ .init ${RELOCATING-0} :
+ {
${RELOCATING+${INIT_START}}
- KEEP (*(.init))
+ KEEP (*(SORT_NONE(.init)))
${RELOCATING+${INIT_END}}
} =${NOP-0}
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
- /* .gnu.warning sections are handled specially by elf32.em. */
+ /* .gnu.warning sections are handled specially by elf.em. */
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
.fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
- KEEP (*(.fini))
+ KEEP (*(SORT_NONE(.fini)))
${RELOCATING+${FINI_END}}
} =${NOP-0}
${RELOCATING+PROVIDE (__etext = .);}
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
${OTHER_READONLY_SECTIONS}
- .eh_frame_hdr : { *(.eh_frame_hdr) }
+ .eh_frame_hdr ${RELOCATING-0} : { *(.eh_frame_hdr) }
.eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
- .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
/* Exception handling */
.eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
- .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) }
/* Thread Local Storage sections */
.tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
${BSS_PLT+${PLT}}
.bss ${RELOCATING-0} :
{
- *(.dynbss)
+ ${RELOCATING+*(.dynbss)}
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
- *(COMMON)
+ ${RELOCATING+*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ . = ALIGN(${ALIGNMENT});}
}
${OTHER_BSS_SECTIONS}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
${RELOCATING+PROVIDE (end = .);}
${RELOCATING+${DATA_SEGMENT_END}}
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
-
- .comment 0 : { *(.comment) }
-
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
-
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
-
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
-
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
-
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
-
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-
- /* DWARF 3 */
- .debug_pubtypes 0 : { *(.debug_pubtypes) }
- .debug_ranges 0 : { *(.debug_ranges) }
+EOF
- /* DWARF Extension. */
- .debug_macro 0 : { *(.debug_macro) }
+source_sh $srcdir/scripttempl/misc-sections.sc
+source_sh $srcdir/scripttempl/DWARF.sc
+cat <<EOF
${STACK_ADDR+${STACK}}
${OTHER_SECTIONS}
${RELOCATING+${OTHER_END_SYMBOLS}}
projects / thirdparty / binutils-gdb.git / blobdiff