#include "mdadm.h"
#include "mdmon.h"
-
+#include <sys/syscall.h>
#include <sys/select.h>
#include <signal.h>
}
-static int get_resync_start(struct active_array *a)
+int get_resync_start(struct active_array *a)
{
char buf[30];
int n;
static void signal_manager(void)
{
- kill(getpid(), SIGUSR1);
+ /* tgkill(getpid(), mon_tid, SIGUSR1); */
+ int pid = getpid();
+ syscall(SYS_tgkill, pid, mgr_tid, SIGUSR1);
}
/* Monitor a set of active md arrays - all of which share the
if (a->curr_state <= inactive &&
a->prev_state > inactive) {
/* array has been stopped */
+ get_resync_start(a);
a->container->ss->set_array_state(a, 1);
a->next_state = clear;
deactivate = 1;
}
if (a->curr_state == readonly) {
- /* Well, I'm ready to handle things, so
- * read-auto is OK. FIXME what if we really want
- * readonly ???
+ /* Well, I'm ready to handle things. If readonly
+ * wasn't requested, transition to read-auto.
*/
- get_resync_start(a);
- printf("Found a readonly array at %llu\n", a->resync_start);
- if (a->resync_start == ~0ULL)
- a->next_state = read_auto; /* array is clean */
- else {
- a->container->ss->set_array_state(a, 0);
- a->next_state = active;
+ char buf[64];
+ read_attr(buf, sizeof(buf), a->metadata_fd);
+ if (strncmp(buf, "external:-", 10) == 0) {
+ /* explicit request for readonly array. Leave it alone */
+ ;
+ } else {
+ get_resync_start(a);
+ if (a->container->ss->set_array_state(a, 2))
+ a->next_state = read_auto; /* array is clean */
+ else
+ a->next_state = active; /* Now active for recovery etc */
}
}
- if (a->curr_action == idle &&
+ if (!deactivate &&
+ a->curr_action == idle &&
a->prev_action == resync) {
/* A resync has finished. The endpoint is recorded in
* 'sync_start'. We don't update the metadata
check_degraded = 1;
}
- if (a->curr_action == idle &&
+ if (!deactivate &&
+ a->curr_action == idle &&
a->prev_action == recover) {
+ /* A recovery has finished. Some disks may be in sync now,
+ * and the array may no longer be degraded
+ */
for (mdi = a->info.devs ; mdi ; mdi = mdi->next) {
a->container->ss->set_disk(a, mdi->disk.raid_disk,
mdi->curr_state);
}
}
-
+ /* Check for failures and if found:
+ * 1/ Record the failure in the metadata and unblock the device.
+ * FIXME update the kernel to stop notifying on failed drives when
+ * the array is readonly and we have cleared 'blocked'
+ * 2/ Try to remove the device if the array is writable, or can be
+ * made writable.
+ */
for (mdi = a->info.devs ; mdi ; mdi = mdi->next) {
if (mdi->curr_state & DS_FAULTY) {
a->container->ss->set_disk(a, mdi->disk.raid_disk,
mdi->curr_state);
check_degraded = 1;
- mdi->next_state = DS_REMOVE;
+ mdi->next_state |= DS_UNBLOCK;
+ if (a->curr_state == read_auto) {
+ a->container->ss->set_array_state(a, 0);
+ a->next_state = active;
+ }
+ if (a->curr_state > readonly)
+ mdi->next_state |= DS_REMOVE;
}
}
- if (check_degraded) {
- /* manager will do the actual check */
- a->check_degraded = 1;
- signal_manager();
- }
-
a->container->ss->sync_metadata(a->container);
+ dprintf("%s: update[%d]: (", __func__, a->info.container_member);
/* Effect state changes in the array */
- if (a->next_state != bad_word)
+ if (a->next_state != bad_word) {
+ dprintf(" state:%s", array_states[a->next_state]);
write_attr(array_states[a->next_state], a->info.state_fd);
- if (a->next_action != bad_action)
+ }
+ if (a->next_action != bad_action) {
write_attr(sync_actions[a->next_action], a->action_fd);
+ dprintf(" action:%s", array_states[a->next_state]);
+ }
for (mdi = a->info.devs; mdi ; mdi = mdi->next) {
- if (mdi->next_state == DS_REMOVE && mdi->state_fd >= 0) {
+ if (mdi->next_state & DS_UNBLOCK) {
+ dprintf(" %d:-blocked", mdi->disk.raid_disk);
+ write_attr("-blocked", mdi->state_fd);
+ }
+
+ if ((mdi->next_state & DS_REMOVE) && mdi->state_fd >= 0) {
int remove_result;
- write_attr("-blocked", mdi->state_fd);
/* the kernel may not be able to immediately remove the
* disk, we can simply wait until the next event to try
* again.
*/
remove_result = write_attr("remove", mdi->state_fd);
if (remove_result > 0) {
+ dprintf(" %d:removed", mdi->disk.raid_disk);
close(mdi->state_fd);
mdi->state_fd = -1;
}
}
- if (mdi->next_state & DS_INSYNC)
+ if (mdi->next_state & DS_INSYNC) {
write_attr("+in_sync", mdi->state_fd);
+ dprintf(" %d:+in_sync", mdi->disk.raid_disk);
+ }
}
+ dprintf(" )\n");
/* move curr_ to prev_ */
a->prev_state = a->curr_state;
mdi->next_state = 0;
}
+ if (check_degraded) {
+ /* manager will do the actual check */
+ a->check_degraded = 1;
+ signal_manager();
+ }
+
if (deactivate)
a->container = NULL;
}
}
-static int handle_remove_device(struct md_remove_device_cmd *cmd, struct active_array *aa)
+#ifdef DEBUG
+static void dprint_wake_reasons(fd_set *fds)
{
- struct active_array *a;
- struct mdinfo *victim;
+ int i;
+ char proc_path[256];
+ char link[256];
+ char *basename;
int rv;
- /* scan all arrays for the given device, if ->state_fd is closed (-1)
- * in all cases then mark the disk as removed in the metadata.
- * Otherwise reply that it is busy.
- */
-
- /* pass1 check that it is not in use anywhere */
- /* note: we are safe from re-adds as long as the device exists in the
- * container
- */
- for (a = aa; a; a = a->next) {
- if (!a->container)
- continue;
- victim = find_device(a, major(cmd->rdev), minor(cmd->rdev));
- if (!victim)
- continue;
- if (victim->state_fd > 0)
- return -EBUSY;
- }
+ fprintf(stderr, "monitor: wake ( ");
+ for (i = 0; i < FD_SETSIZE; i++) {
+ if (FD_ISSET(i, fds)) {
+ sprintf(proc_path, "/proc/%d/fd/%d",
+ (int) getpid(), i);
- /* pass2 schedule and process removal per array */
- for (a = aa; a; a = a->next) {
- if (!a->container)
- continue;
- victim = find_device(a, major(cmd->rdev), minor(cmd->rdev));
- if (!victim)
- continue;
- victim->curr_state |= DS_REMOVE;
- rv = read_and_act(a);
- if (rv < 0)
- return rv;
+ rv = readlink(proc_path, link, sizeof(link) - 1);
+ if (rv < 0) {
+ fprintf(stderr, "%d:unknown ", i);
+ continue;
+ }
+ link[rv] = '\0';
+ basename = strrchr(link, '/');
+ fprintf(stderr, "%d:%s ",
+ i, basename ? ++basename : link);
+ }
}
-
- return 0;
+ fprintf(stderr, ")\n");
}
+#endif
-static int handle_pipe(struct md_generic_cmd *cmd, struct active_array *aa)
-{
- switch (cmd->action) {
- case md_action_ping_monitor:
- return 0;
- case md_action_remove_device:
- return handle_remove_device((void *) cmd, aa);
- }
-
- return -1;
-}
+int monitor_loop_cnt;
-static int wait_and_act(struct supertype *container, int pfd,
- int monfd, int nowait)
+static int wait_and_act(struct supertype *container, int nowait)
{
fd_set rfds;
int maxfd = 0;
FD_ZERO(&rfds);
- add_fd(&rfds, &maxfd, pfd);
for (ap = aap ; *ap ;) {
a = *ap;
/* once an array has been deactivated we want to
int fd = open(container->device_name, O_RDONLY|O_EXCL);
if (fd >= 0 || errno != EBUSY) {
/* OK, we are safe to leave */
+ dprintf("no arrays to monitor... exiting\n");
+ remove_pidfile(container->devname);
exit_now = 1;
signal_manager();
- remove_pidfile(container->devname);
exit(0);
}
}
if (!nowait) {
- rv = select(maxfd+1, &rfds, NULL, NULL, NULL);
+ sigset_t set;
+ sigprocmask(SIG_UNBLOCK, NULL, &set);
+ sigdelset(&set, SIGUSR1);
+ monitor_loop_cnt |= 1;
+ rv = pselect(maxfd+1, &rfds, NULL, NULL, NULL, &set);
+ monitor_loop_cnt += 1;
+ if (rv == -1 && errno == EINTR)
+ rv = 0;
+ #ifdef DEBUG
+ dprint_wake_reasons(&rfds);
+ #endif
- if (rv <= 0)
- return rv;
-
- if (FD_ISSET(pfd, &rfds)) {
- int err = -1;
-
- if (read(pfd, &err, 1) > 0)
- err = handle_pipe(active_cmd, *aap);
- write(monfd, &err, 1);
- }
}
if (update_queue) {
int rv;
int first = 1;
do {
- rv = wait_and_act(container, container->mgr_pipe[0],
- container->mon_pipe[1], first);
+ rv = wait_and_act(container, first);
first = 0;
} while (rv >= 0);
}