/*
- * "$Id: job.c 7005 2007-10-01 23:45:48Z mike $"
+ * "$Id$"
*
- * Job management routines for the Common UNIX Printing System (CUPS).
+ * Job management routines for the CUPS scheduler.
*
- * Copyright 2007-2008 by Apple Inc.
- * Copyright 1997-2007 by Easy Software Products, all rights reserved.
+ * Copyright 2007-2013 by Apple Inc.
+ * Copyright 1997-2007 by Easy Software Products, all rights reserved.
*
- * These coded instructions, statements, and computer programs are the
- * property of Apple Inc. and are protected by Federal copyright
- * law. Distribution and use rights are outlined in the file "LICENSE.txt"
- * which should have been included with this file. If this file is
- * file is missing or damaged, see the license at "http://www.cups.org/".
- *
- * Contents:
- *
- * cupsdAddJob() - Add a new job to the job queue...
- * cupsdCancelJob() - Cancel the specified print job.
- * cupsdCancelJobs() - Cancel all jobs for the given
- * destination/user...
- * cupsdCheckJobs() - Check the pending jobs and start any if
- * the destination is available.
- * cupsdCleanJobs() - Clean out old jobs.
- * cupsdDeleteJob() - Free all memory used by a job.
- * cupsdFinishJob() - Finish a job.
- * cupsdFreeAllJobs() - Free all jobs from memory.
- * cupsdFindJob() - Find the specified job.
- * cupsdGetPrinterJobCount() - Get the number of pending, processing,
- * cupsdGetUserJobCount() - Get the number of pending, processing,
- * cupsdHoldJob() - Hold the specified job.
- * cupsdLoadAllJobs() - Load all jobs from disk.
- * cupsdLoadJob() - Load a single job...
- * cupsdMoveJob() - Move the specified job to a different
- * destination.
- * cupsdReleaseJob() - Release the specified job.
- * cupsdRestartJob() - Restart the specified job.
- * cupsdSaveAllJobs() - Save a summary of all jobs to disk.
- * cupsdSaveJob() - Save a job to disk.
- * cupsdSetJobHoldUntil() - Set the hold time for a job...
- * cupsdSetJobPriority() - Set the priority of a job, moving it
- * up/down in the list as needed.
- * cupsdStopAllJobs() - Stop all print jobs.
- * cupsdStopJob() - Stop a print job.
- * cupsdUnloadCompletedJobs() - Flush completed job history from memory.
- * compare_active_jobs() - Compare the job IDs and priorities of two
- * jobs.
- * compare_jobs() - Compare the job IDs of two jobs.
- * ipp_length() - Compute the size of the buffer needed to
- * hold the textual IPP attributes.
- * load_job_cache() - Load jobs from the job.cache file.
- * load_next_job_id() - Load the NextJobId value from the
- * job.cache file.
- * load_request_root() - Load jobs from the RequestRoot directory.
- * set_time() - Set one of the "time-at-xyz" attributes...
- * set_hold_until() - Set the hold time and update job-hold-until
- * attribute...
- * start_job() - Start a print job.
- * unload_job() - Unload a job from memory.
- * update_job() - Read a status update from a jobs filters.
- * update_job_attrs() - Update the job-printer-* attributes.
+ * These coded instructions, statements, and computer programs are the
+ * property of Apple Inc. and are protected by Federal copyright
+ * law. Distribution and use rights are outlined in the file "LICENSE.txt"
+ * which should have been included with this file. If this file is
+ * file is missing or damaged, see the license at "http://www.cups.org/".
*/
/*
#include <grp.h>
#include <cups/backend.h>
#include <cups/dir.h>
+#ifdef __APPLE__
+# include <IOKit/pwr_mgt/IOPMLib.h>
+# ifdef HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H
+# include <IOKit/pwr_mgt/IOPMLibPrivate.h>
+# endif /* HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H */
+#endif /* __APPLE__ */
+
+
+/*
+ * Design Notes for Job Management
+ * -------------------------------
+ *
+ * STATE CHANGES
+ *
+ * pending Do nothing/check jobs
+ * pending-held Send SIGTERM to filters and backend
+ * processing Do nothing/start job
+ * stopped Send SIGKILL to filters and backend
+ * canceled Send SIGTERM to filters and backend
+ * aborted Finalize
+ * completed Finalize
+ *
+ * Finalize clears the printer <-> job association, deletes the status
+ * buffer, closes all of the pipes, etc. and doesn't get run until all of
+ * the print processes are finished.
+ *
+ * UNLOADING OF JOBS (cupsdUnloadCompletedJobs)
+ *
+ * We unload the job attributes when they are not needed to reduce overall
+ * memory consumption. We don't unload jobs where job->state_value <
+ * IPP_JOB_STOPPED, job->printer != NULL, or job->access_time is recent.
+ *
+ * STARTING OF JOBS (start_job)
+ *
+ * When a job is started, a status buffer, several pipes, a security
+ * profile, and a backend process are created for the life of that job.
+ * These are shared for every file in a job. For remote print jobs, the
+ * IPP backend is provided with every file in the job and no filters are
+ * run.
+ *
+ * The job->printer member tracks which printer is printing a job, which
+ * can be different than the destination in job->dest for classes. The
+ * printer object also has a job pointer to track which job is being
+ * printed.
+ *
+ * PRINTING OF JOB FILES (cupsdContinueJob)
+ *
+ * Each file in a job is filtered by 0 or more programs. After getting the
+ * list of filters needed and the total cost, the job is either passed or
+ * put back to the processing state until the current FilterLevel comes down
+ * enough to allow printing.
+ *
+ * If we can print, we build a string for the print options and run each of
+ * the filters, piping the output from one into the next.
+ *
+ * JOB STATUS UPDATES (update_job)
+ *
+ * The update_job function gets called whenever there are pending messages
+ * on the status pipe. These generally are updates to the marker-*,
+ * printer-state-message, or printer-state-reasons attributes. On EOF,
+ * finalize_job is called to clean up.
+ *
+ * FINALIZING JOBS (finalize_job)
+ *
+ * When all filters and the backend are done, we set the job state to
+ * completed (no errors), aborted (filter errors or abort-job policy),
+ * pending-held (auth required or retry-job policy), or pending
+ * (retry-current-job or stop-printer policies) as appropriate.
+ *
+ * Then we close the pipes and free the status buffers and profiles.
+ *
+ * JOB FILE COMPLETION (process_children in main.c)
+ *
+ * For multiple-file jobs, process_children (in main.c) sees that all
+ * filters have exited and calls in to print the next file if there are
+ * more files in the job, otherwise it waits for the backend to exit and
+ * update_job to do the cleanup.
+ */
/*
static int compare_active_jobs(void *first, void *second, void *data);
static int compare_jobs(void *first, void *second, void *data);
-static int ipp_length(ipp_t *ipp);
+static void dump_job_history(cupsd_job_t *job);
+static void finalize_job(cupsd_job_t *job, int set_job_state);
+static void free_job_history(cupsd_job_t *job);
+static char *get_options(cupsd_job_t *job, int banner_page, char *copies,
+ size_t copies_size, char *title,
+ size_t title_size);
+static size_t ipp_length(ipp_t *ipp);
static void load_job_cache(const char *filename);
static void load_next_job_id(const char *filename);
static void load_request_root(void);
+static void remove_job_files(cupsd_job_t *job);
+static void remove_job_history(cupsd_job_t *job);
static void set_time(cupsd_job_t *job, const char *name);
-static void set_hold_until(cupsd_job_t *job, time_t holdtime);
static void start_job(cupsd_job_t *job, cupsd_printer_t *printer);
+static void stop_job(cupsd_job_t *job, cupsd_jobaction_t action);
static void unload_job(cupsd_job_t *job);
static void update_job(cupsd_job_t *job);
-static void update_job_attrs(cupsd_job_t *job);
+static void update_job_attrs(cupsd_job_t *job, int do_message);
/*
- * 'cupsdAddJob()' - Add a new job to the job queue...
+ * 'cupsdAddJob()' - Add a new job to the job queue.
*/
cupsd_job_t * /* O - New job record */
/*
- * 'cupsdCancelJob()' - Cancel the specified print job.
- */
-
-void
-cupsdCancelJob(cupsd_job_t *job, /* I - Job to cancel */
- int purge, /* I - Purge jobs? */
- ipp_jstate_t newstate) /* I - New job state */
-{
- int i; /* Looping var */
- char filename[1024]; /* Job filename */
- cupsd_printer_t *printer; /* Printer used by job */
-
-
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCancelJob: id = %d", job->id);
-
- /*
- * Stop any processes that are working on the current job...
- */
-
- printer = job->printer;
-
- if (job->state_value == IPP_JOB_PROCESSING)
- cupsdStopJob(job, 0);
-
- cupsdLoadJob(job);
-
- if (job->attrs)
- job->state->values[0].integer = newstate;
-
- job->state_value = newstate;
-
- set_time(job, "time-at-completed");
-
- /*
- * Send any pending notifications and then expire them...
- */
-
- switch (newstate)
- {
- default :
- break;
-
- case IPP_JOB_CANCELED :
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, printer, job,
- purge ? "Job purged." : "Job canceled.");
- break;
-
- case IPP_JOB_ABORTED :
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, printer, job,
- "Job aborted; please consult the error_log file "
- "for details.");
- break;
-
- case IPP_JOB_COMPLETED :
- /*
- * Clear the printer's printer-state-message and move on...
- */
-
- printer->state_message[0] = '\0';
-
- cupsdSetPrinterState(printer, IPP_PRINTER_IDLE, 0);
-
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, printer, job,
- "Job completed.");
- break;
- }
-
- cupsdExpireSubscriptions(NULL, job);
-
- /*
- * Remove the job from the active and printing lists...
- */
-
- cupsArrayRemove(ActiveJobs, job);
- cupsArrayRemove(PrintingJobs, job);
-
- /*
- * Remove any authentication data...
- */
-
- snprintf(filename, sizeof(filename), "%s/a%05d", RequestRoot, job->id);
- if (cupsdRemoveFile(filename) && errno != ENOENT)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to remove authentication cache: %s",
- strerror(errno));
-
- cupsdClearString(&job->auth_username);
- cupsdClearString(&job->auth_domain);
- cupsdClearString(&job->auth_password);
-
-#ifdef HAVE_GSSAPI
- /*
- * Destroy the credential cache and clear the KRB5CCNAME env var string.
- */
-
- if (job->ccache)
- {
- krb5_cc_destroy(KerberosContext, job->ccache);
- job->ccache = NULL;
- }
-
- cupsdClearString(&job->ccname);
-#endif /* HAVE_GSSAPI */
-
- /*
- * Remove the print file for good if we aren't preserving jobs or
- * files...
- */
-
- job->current_file = 0;
-
- if (!JobHistory || !JobFiles || purge)
- {
- for (i = 1; i <= job->num_files; i ++)
- {
- snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
- job->id, i);
- unlink(filename);
- }
-
- if (job->num_files > 0)
- {
- free(job->filetypes);
- free(job->compressions);
-
- job->num_files = 0;
- job->filetypes = NULL;
- job->compressions = NULL;
- }
- }
-
- if (JobHistory && !purge)
- {
- /*
- * Save job state info...
- */
-
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
- }
- else
- {
- /*
- * Remove the job info file...
- */
-
- snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot,
- job->id);
- unlink(filename);
-
- /*
- * Remove the job from the "all jobs" list...
- */
-
- cupsArrayRemove(Jobs, job);
-
- /*
- * Free all memory used...
- */
-
- cupsdDeleteJob(job);
- }
-
- cupsdSetBusyState();
-}
-
-
-/*
- * 'cupsdCancelJobs()' - Cancel all jobs for the given destination/user...
+ * 'cupsdCancelJobs()' - Cancel all jobs for the given destination/user.
*/
void
job;
job = (cupsd_job_t *)cupsArrayNext(Jobs))
{
- if (!job->dest || !job->username)
- cupsdLoadJob(job);
-
- if (!job->dest || !job->username)
+ if ((!job->dest || !job->username) && !cupsdLoadJob(job))
continue;
- if ((dest == NULL || !strcmp(job->dest, dest)) &&
- (username == NULL || !strcmp(job->username, username)))
+ if ((!dest || !strcmp(job->dest, dest)) &&
+ (!username || !strcmp(job->username, username)))
{
/*
* Cancel all jobs matching this destination/user...
*/
- cupsdCancelJob(job, purge, IPP_JOB_CANCELED);
+ if (purge)
+ cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_PURGE,
+ "Job purged by user.");
+ else if (job->state_value < IPP_JOB_CANCELED)
+ cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_DEFAULT,
+ "Job canceled by user.");
}
}
cupsd_printer_t *printer, /* Printer destination */
*pclass; /* Printer class destination */
ipp_attribute_t *attr; /* Job attribute */
+ time_t curtime; /* Current time */
- DEBUG_puts("cupsdCheckJobs()");
+ curtime = time(NULL);
cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "cupsdCheckJobs: %d active jobs, sleeping=%d, reload=%d",
- cupsArrayCount(ActiveJobs), Sleeping, NeedReload);
+ "cupsdCheckJobs: %d active jobs, sleeping=%d, reload=%d, "
+ "curtime=%ld", cupsArrayCount(ActiveJobs), Sleeping,
+ NeedReload, (long)curtime);
for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs);
job;
job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
{
+ cupsdLogMessage(CUPSD_LOG_DEBUG2,
+ "cupsdCheckJobs: Job %d - dest=\"%s\", printer=%p, "
+ "state=%d, cancel_time=%ld, hold_until=%ld, kill_time=%ld, "
+ "pending_cost=%d, pending_timeout=%ld", job->id, job->dest,
+ job->printer, job->state_value, (long)job->cancel_time,
+ (long)job->hold_until, (long)job->kill_time,
+ job->pending_cost, (long)job->pending_timeout);
+
/*
- * Start held jobs if they are ready...
+ * Kill jobs if they are unresponsive...
*/
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "cupsdCheckJobs: Job %d: state_value=%d, loaded=%s",
- job->id, job->state_value, job->attrs ? "yes" : "no");
+ if (job->kill_time && job->kill_time <= curtime)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Stopping unresponsive job.");
+
+ stop_job(job, CUPSD_JOB_FORCE);
+ continue;
+ }
+
+ /*
+ * Cancel stuck jobs...
+ */
+
+ if (job->cancel_time && job->cancel_time <= curtime)
+ {
+ cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_DEFAULT,
+ "Canceling stuck job after %d seconds.", MaxJobTime);
+ continue;
+ }
+
+ /*
+ * Start held jobs if they are ready...
+ */
if (job->state_value == IPP_JOB_HELD &&
job->hold_until &&
- job->hold_until < time(NULL))
+ job->hold_until < curtime)
{
if (job->pending_timeout)
{
- /* Add trailing banner as needed */
+ /*
+ * This job is pending; check that we don't have an active Send-Document
+ * operation in progress on any of the client connections, then timeout
+ * the job so we can start printing...
+ */
+
+ cupsd_client_t *con; /* Current client connection */
+
+ for (con = (cupsd_client_t *)cupsArrayFirst(Clients);
+ con;
+ con = (cupsd_client_t *)cupsArrayNext(Clients))
+ if (con->request &&
+ con->request->request.op.operation_id == IPP_SEND_DOCUMENT)
+ break;
+
+ if (con)
+ continue;
+
if (cupsdTimeoutJob(job))
continue;
}
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
+ cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT,
+ "Job submission timed out.");
+ }
- if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
- IPP_TAG_KEYWORD)) == NULL)
- attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
+ /*
+ * Continue jobs that are waiting on the FilterLimit...
+ */
- if (attr)
- {
- attr->value_tag = IPP_TAG_KEYWORD;
- cupsdSetString(&(attr->values[0].string.text), "no-hold");
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
- }
- }
+ if (job->pending_cost > 0 &&
+ ((FilterLevel + job->pending_cost) < FilterLimit || FilterLevel == 0))
+ cupsdContinueJob(job);
/*
* Start pending jobs if the destination is available...
*/
- if (job->state_value == IPP_JOB_PENDING && !NeedReload && !Sleeping)
+ if (job->state_value == IPP_JOB_PENDING && !NeedReload &&
+#ifndef kIOPMAssertionTypeDenySystemSleep
+ !Sleeping &&
+#endif /* !kIOPMAssertionTypeDenySystemSleep */
+ !DoingShutdown && !job->printer)
{
printer = cupsdFindDest(job->dest);
pclass = NULL;
- while (printer &&
- (printer->type & (CUPS_PRINTER_IMPLICIT | CUPS_PRINTER_CLASS)))
+ while (printer && (printer->type & CUPS_PRINTER_CLASS))
{
/*
* If the class is remote, just pass it to the remote server...
* cancel the job...
*/
- cupsdLogMessage(CUPSD_LOG_WARN,
- "[Job %d] Printer/class %s has gone away; canceling job!",
- job->id, job->dest);
-
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job,
- "Job canceled because the destination printer/class has "
- "gone away.");
-
- cupsdCancelJob(job, 1, IPP_JOB_ABORTED);
+ cupsdSetJobState(job, IPP_JOB_ABORTED, CUPSD_JOB_PURGE,
+ "Job aborted because the destination printer/class "
+ "has gone away.");
}
- else if (printer)
+ else if (printer && !printer->holding_new_jobs)
{
/*
* See if the printer is available or remote and not printing a job;
cupsdMarkDirty(CUPSD_DIRTY_JOBS);
}
- if ((!(printer->type & CUPS_PRINTER_DISCOVERED) && /* Printer is local */
- printer->state == IPP_PRINTER_IDLE) || /* and idle */
- ((printer->type & CUPS_PRINTER_DISCOVERED) && /* Printer is remote */
- !printer->job)) /* and not printing */
+ if (!printer->job && printer->state == IPP_PRINTER_IDLE)
{
- /*
- * Clear any message and reasons for the queue...
- */
-
- printer->state_message[0] = '\0';
-
- cupsdSetPrinterReasons(printer, "none");
-
/*
* Start the job...
*/
cupsdCleanJobs(void)
{
cupsd_job_t *job; /* Current job */
+ time_t curtime; /* Current time */
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2,
+ "cupsdCleanJobs: MaxJobs=%d, JobHistory=%d, JobFiles=%d",
+ MaxJobs, JobHistory, JobFiles);
- if (MaxJobs <= 0)
+ if (MaxJobs <= 0 && JobHistory == INT_MAX && JobFiles == INT_MAX)
return;
+ curtime = time(NULL);
+ JobHistoryUpdate = 0;
+
for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
- job && cupsArrayCount(Jobs) >= MaxJobs;
+ job;
job = (cupsd_job_t *)cupsArrayNext(Jobs))
- if (job->state_value >= IPP_JOB_CANCELED)
- cupsdCancelJob(job, 1, IPP_JOB_CANCELED);
-}
-
-
-/*
- * 'cupsdDeleteJob()' - Free all memory used by a job.
- */
-
-void
-cupsdDeleteJob(cupsd_job_t *job) /* I - Job */
-{
- cupsdClearString(&job->username);
- cupsdClearString(&job->dest);
- cupsdClearString(&job->auth_username);
- cupsdClearString(&job->auth_domain);
- cupsdClearString(&job->auth_password);
-
-#ifdef HAVE_GSSAPI
- /*
- * Destroy the credential cache and clear the KRB5CCNAME env var string.
- */
-
- if (job->ccache)
{
- krb5_cc_destroy(KerberosContext, job->ccache);
- job->ccache = NULL;
- }
+ if (job->state_value >= IPP_JOB_CANCELED && !job->printer)
+ {
+ /*
+ * Expire old jobs (or job files)...
+ */
- cupsdClearString(&job->ccname);
-#endif /* HAVE_GSSAPI */
+ if ((MaxJobs > 0 && cupsArrayCount(Jobs) >= MaxJobs) ||
+ (job->history_time && job->history_time <= curtime))
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing from history.");
+ cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+ }
+ else if (job->file_time && job->file_time <= curtime)
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing document files.");
+ remove_job_files(job);
- if (job->num_files > 0)
- {
- free(job->compressions);
- free(job->filetypes);
- }
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
+ }
+ else
+ {
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
- ippDelete(job->attrs);
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
+ }
+ }
+ }
- free(job);
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCleanJobs: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
}
/*
- * 'cupsdFinishJob()' - Finish a job.
+ * 'cupsdContinueJob()' - Continue printing with the next file in a job.
*/
void
-cupsdFinishJob(cupsd_job_t *job) /* I - Job */
+cupsdContinueJob(cupsd_job_t *job) /* I - Job */
{
- cupsd_printer_t *printer; /* Current printer */
- ipp_attribute_t *attr; /* job-hold-until attribute */
-
+ int i; /* Looping var */
+ int slot; /* Pipe slot */
+ cups_array_t *filters = NULL,/* Filters for job */
+ *prefilters; /* Filters with prefilters */
+ mime_filter_t *filter, /* Current filter */
+ *prefilter, /* Prefilter */
+ port_monitor; /* Port monitor filter */
+ char scheme[255]; /* Device URI scheme */
+ ipp_attribute_t *attr; /* Current attribute */
+ const char *ptr, /* Pointer into value */
+ *abort_message; /* Abort message */
+ ipp_jstate_t abort_state = IPP_JOB_STOPPED;
+ /* New job state on abort */
+ struct stat backinfo; /* Backend file information */
+ int backroot; /* Run backend as root? */
+ int pid; /* Process ID of new filter process */
+ int banner_page; /* 1 if banner page, 0 otherwise */
+ int filterfds[2][2] = { { -1, -1 }, { -1, -1 } };
+ /* Pipes used between filters */
+ int envc; /* Number of environment variables */
+ struct stat fileinfo; /* Job file information */
+ char **argv = NULL, /* Filter command-line arguments */
+ filename[1024], /* Job filename */
+ command[1024], /* Full path to command */
+ jobid[255], /* Job ID string */
+ title[IPP_MAX_NAME],
+ /* Job title string */
+ copies[255], /* # copies string */
+ *options, /* Options string */
+ *envp[MAX_ENV + 21],
+ /* Environment variables */
+ charset[255], /* CHARSET env variable */
+ class_name[255],/* CLASS env variable */
+ classification[1024],
+ /* CLASSIFICATION env variable */
+ content_type[1024],
+ /* CONTENT_TYPE env variable */
+ device_uri[1024],
+ /* DEVICE_URI env variable */
+ final_content_type[1024] = "",
+ /* FINAL_CONTENT_TYPE env variable */
+ lang[255], /* LANG env variable */
+#ifdef __APPLE__
+ apple_language[255],
+ /* APPLE_LANGUAGE env variable */
+#endif /* __APPLE__ */
+ auth_info_required[255],
+ /* AUTH_INFO_REQUIRED env variable */
+ ppd[1024], /* PPD env variable */
+ printer_info[255],
+ /* PRINTER_INFO env variable */
+ printer_location[255],
+ /* PRINTER_LOCATION env variable */
+ printer_name[255],
+ /* PRINTER env variable */
+ *printer_state_reasons = NULL,
+ /* PRINTER_STATE_REASONS env var */
+ rip_max_cache[255];
+ /* RIP_MAX_CACHE env variable */
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] File %d is complete.",
- job->id, job->current_file - 1);
cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] cupsdFinishJob: job->status is %d",
- job->id, job->status);
+ "cupsdContinueJob(job=%p(%d)): current_file=%d, num_files=%d",
+ job, job->id, job->current_file, job->num_files);
- if (job->status_buffer &&
- (job->status < 0 || job->current_file >= job->num_files))
- {
- /*
- * Close the pipe and clear the input bit.
- */
-
- cupsdRemoveSelect(job->status_buffer->fd);
-
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] cupsdFinishJob: Closing status pipes [ %d %d ]...",
- job->id, job->status_pipes[0], job->status_pipes[1]);
-
- cupsdClosePipe(job->status_pipes);
- cupsdStatBufDelete(job->status_buffer);
+ /*
+ * Figure out what filters are required to convert from
+ * the source to the destination type...
+ */
- job->status_buffer = NULL;
- }
+ FilterLevel -= job->cost;
- printer = job->printer;
+ job->cost = 0;
+ job->pending_cost = 0;
- update_job_attrs(job);
+ memset(job->filters, 0, sizeof(job->filters));
- if (job->status < 0)
+ if (job->printer->raw)
{
/*
- * Backend had errors; stop it...
+ * Remote jobs and raw queues go directly to the printer without
+ * filtering...
*/
- int exit_code; /* Exit code from backend */
-
-
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Sending job to queue tagged as raw...");
+ }
+ else
+ {
/*
- * Convert the status to an exit code. Due to the way the W* macros are
- * implemented on MacOS X (bug?), we have to store the exit status in a
- * variable first and then convert...
+ * Local jobs get filtered...
*/
- exit_code = -job->status;
- if (WIFEXITED(exit_code))
- exit_code = WEXITSTATUS(exit_code);
- else
- exit_code = job->status;
-
- cupsdLogMessage(CUPSD_LOG_INFO, "[Job %d] Backend returned status %d (%s)",
- job->id, exit_code,
- exit_code == CUPS_BACKEND_FAILED ? "failed" :
- exit_code == CUPS_BACKEND_AUTH_REQUIRED ?
- "authentication required" :
- exit_code == CUPS_BACKEND_HOLD ? "hold job" :
- exit_code == CUPS_BACKEND_STOP ? "stop printer" :
- exit_code == CUPS_BACKEND_CANCEL ? "cancel job" :
- exit_code < 0 ? "crashed" : "unknown");
+ snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
+ job->id, job->current_file + 1);
+ if (stat(filename, &fileinfo))
+ fileinfo.st_size = 0;
- /*
- * Do what needs to be done...
- */
+ filters = mimeFilter2(MimeDatabase, job->filetypes[job->current_file],
+ fileinfo.st_size, job->printer->filetype,
+ &(job->cost));
- switch (exit_code)
+ if (!filters)
{
- default :
- case CUPS_BACKEND_FAILED :
- /*
- * Backend failure, use the error-policy to determine how to
- * act...
- */
-
- cupsdStopJob(job, 0);
-
- if (job->dtype & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT))
- {
- /*
- * Mark the job as pending again - we'll retry on another
- * printer...
- */
-
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
- }
-
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
-
- /*
- * If the job was queued to a class, try requeuing it... For
- * faxes and retry-job queues, hold the current job for 5 minutes.
- */
-
- if (job->dtype & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT))
- cupsdCheckJobs();
- else if ((printer->type & CUPS_PRINTER_FAX) ||
- !strcmp(printer->error_policy, "retry-job"))
- {
- /*
- * See how many times we've tried to send the job; if more than
- * the limit, cancel the job.
- */
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unable to convert file %d to printable format.",
+ job->current_file);
- job->tries ++;
+ abort_message = "Aborting job because it cannot be printed.";
+ abort_state = IPP_JOB_ABORTED;
- if (job->tries >= JobRetryLimit)
- {
- /*
- * Too many tries...
- */
+ ippSetString(job->attrs, &job->reasons, 0, "document-unprintable-error");
+ goto abort_job;
+ }
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Canceling job since it could not be "
- "sent after %d tries.",
- job->id, JobRetryLimit);
+ /*
+ * Figure out the final content type...
+ */
- cupsdCancelJob(job, 0, IPP_JOB_ABORTED);
- }
- else
- {
- /*
- * Try again in N seconds...
- */
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "%d filters for job:",
+ cupsArrayCount(filters));
+ for (filter = (mime_filter_t *)cupsArrayFirst(filters);
+ filter;
+ filter = (mime_filter_t *)cupsArrayNext(filters))
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "%s (%s/%s to %s/%s, cost %d)",
+ filter->filter,
+ filter->src ? filter->src->super : "???",
+ filter->src ? filter->src->type : "???",
+ filter->dst ? filter->dst->super : "???",
+ filter->dst ? filter->dst->type : "???",
+ filter->cost);
+
+ if (!job->printer->remote)
+ {
+ for (filter = (mime_filter_t *)cupsArrayLast(filters);
+ filter && filter->dst;
+ filter = (mime_filter_t *)cupsArrayPrev(filters))
+ if (strcmp(filter->dst->super, "printer") ||
+ strcmp(filter->dst->type, job->printer->name))
+ break;
- set_hold_until(job, time(NULL) + JobRetryInterval);
+ if (filter && filter->dst)
+ {
+ if ((ptr = strchr(filter->dst->type, '/')) != NULL)
+ snprintf(final_content_type, sizeof(final_content_type),
+ "FINAL_CONTENT_TYPE=%s", ptr + 1);
+ else
+ snprintf(final_content_type, sizeof(final_content_type),
+ "FINAL_CONTENT_TYPE=%s/%s", filter->dst->super,
+ filter->dst->type);
+ }
+ else
+ snprintf(final_content_type, sizeof(final_content_type),
+ "FINAL_CONTENT_TYPE=printer/%s", job->printer->name);
+ }
- cupsdAddEvent(CUPSD_EVENT_JOB_STATE, job->printer, job,
- "Job held due to fax errors; please consult "
- "the error_log file for details.");
- cupsdSetPrinterState(printer, IPP_PRINTER_IDLE, 0);
- }
- }
- else if (!strcmp(printer->error_policy, "abort-job"))
- cupsdCancelJob(job, 0, IPP_JOB_ABORTED);
- else
- {
- cupsdSetPrinterState(printer, IPP_PRINTER_STOPPED, 1);
+ /*
+ * Remove NULL ("-") filters...
+ */
- cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, printer, job,
- "Job stopped due to backend errors; please consult "
- "the error_log file for details.");
- }
- break;
+ for (filter = (mime_filter_t *)cupsArrayFirst(filters);
+ filter;
+ filter = (mime_filter_t *)cupsArrayNext(filters))
+ if (!strcmp(filter->filter, "-"))
+ cupsArrayRemove(filters, filter);
- case CUPS_BACKEND_CANCEL :
- /*
- * Cancel the job...
- */
+ if (cupsArrayCount(filters) == 0)
+ {
+ cupsArrayDelete(filters);
+ filters = NULL;
+ }
- cupsdCancelJob(job, 0, IPP_JOB_CANCELED);
- break;
+ /*
+ * If this printer has any pre-filters, insert the required pre-filter
+ * in the filters array...
+ */
- case CUPS_BACKEND_HOLD :
- /*
- * Hold the job...
- */
+ if (job->printer->prefiltertype && filters)
+ {
+ prefilters = cupsArrayNew(NULL, NULL);
- cupsdStopJob(job, 0);
+ for (filter = (mime_filter_t *)cupsArrayFirst(filters);
+ filter;
+ filter = (mime_filter_t *)cupsArrayNext(filters))
+ {
+ if ((prefilter = mimeFilterLookup(MimeDatabase, filter->src,
+ job->printer->prefiltertype)))
+ {
+ cupsArrayAdd(prefilters, prefilter);
+ job->cost += prefilter->cost;
+ }
- cupsdSetJobHoldUntil(job, "indefinite");
+ cupsArrayAdd(prefilters, filter);
+ }
- job->state->values[0].integer = IPP_JOB_HELD;
- job->state_value = IPP_JOB_HELD;
+ cupsArrayDelete(filters);
+ filters = prefilters;
+ }
+ }
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ /*
+ * Set a minimum cost of 100 for all jobs so that FilterLimit
+ * works with raw queues and other low-cost paths.
+ */
- cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, printer, job,
- "Job held due to backend errors; please consult "
- "the error_log file for details.");
- break;
+ if (job->cost < 100)
+ job->cost = 100;
- case CUPS_BACKEND_STOP :
- /*
- * Stop the printer...
- */
+ /*
+ * See if the filter cost is too high...
+ */
- cupsdStopJob(job, 0);
+ if ((FilterLevel + job->cost) > FilterLimit && FilterLevel > 0 &&
+ FilterLimit > 0)
+ {
+ /*
+ * Don't print this job quite yet...
+ */
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
+ cupsArrayDelete(filters);
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ cupsdLogJob(job, CUPSD_LOG_INFO,
+ "Holding because filter limit has been reached.");
+ cupsdLogJob(job, CUPSD_LOG_DEBUG2,
+ "cupsdContinueJob: file=%d, cost=%d, level=%d, limit=%d",
+ job->current_file, job->cost, FilterLevel,
+ FilterLimit);
- cupsdSetPrinterState(printer, IPP_PRINTER_STOPPED, 1);
+ job->pending_cost = job->cost;
+ job->cost = 0;
+ return;
+ }
- cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, printer, job,
- "Job stopped due to backend errors; please consult "
- "the error_log file for details.");
- break;
+ FilterLevel += job->cost;
- case CUPS_BACKEND_AUTH_REQUIRED :
- cupsdStopJob(job, 0);
+ /*
+ * Add decompression/raw filter as needed...
+ */
- cupsdSetJobHoldUntil(job, "auth-info-required");
+ if (job->compressions[job->current_file] &&
+ (!job->printer->remote || job->num_files == 1))
+ {
+ /*
+ * Add gziptoany filter to the front of the list...
+ */
- if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
- IPP_TAG_KEYWORD)) == NULL)
- attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
+ if (!filters)
+ filters = cupsArrayNew(NULL, NULL);
- if (attr)
- {
- attr->value_tag = IPP_TAG_KEYWORD;
- cupsdSetString(&(attr->values[0].string.text),
- "auth-info-required");
- }
+ if (!cupsArrayInsert(filters, &gziptoany_filter))
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Unable to add decompression filter - %s", strerror(errno));
- job->state->values[0].integer = IPP_JOB_HELD;
- job->state_value = IPP_JOB_HELD;
+ cupsArrayDelete(filters);
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ abort_message = "Stopping job because the scheduler ran out of memory.";
- cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, printer, job,
- "Authentication is required for job %d.", job->id);
- break;
+ goto abort_job;
}
+ }
- /*
- * Try printing another job...
- */
+ /*
+ * Add port monitor, if any...
+ */
- cupsdCheckJobs();
- }
- else if (job->status > 0)
+ if (job->printer->port_monitor)
{
/*
- * Filter had errors; stop job...
+ * Add port monitor to the end of the list...
*/
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Job stopped due to filter errors.", job->id);
- cupsdStopJob(job, 1);
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
- cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, printer, job,
- "Job stopped due to filter errors; please consult the "
- "error_log file for details.");
- cupsdCheckJobs();
- }
- else
- {
- /*
- * Job printed successfully; cancel it...
- */
+ if (!filters)
+ filters = cupsArrayNew(NULL, NULL);
- if (job->current_file < job->num_files)
- {
- /*
- * Start the next file in the job...
- */
+ port_monitor.src = NULL;
+ port_monitor.dst = NULL;
+ port_monitor.cost = 0;
- FilterLevel -= job->cost;
- start_job(job, printer);
- }
- else
+ snprintf(port_monitor.filter, sizeof(port_monitor.filter),
+ "%s/monitor/%s", ServerBin, job->printer->port_monitor);
+
+ if (!cupsArrayAdd(filters, &port_monitor))
{
- /*
- * Close out this job...
- */
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Unable to add port monitor - %s", strerror(errno));
+
+ abort_message = "Stopping job because the scheduler ran out of memory.";
- cupsdLogMessage(CUPSD_LOG_INFO, "[Job %d] Completed successfully.",
- job->id);
- cupsdCancelJob(job, 0, IPP_JOB_COMPLETED);
- cupsdCheckJobs();
+ goto abort_job;
}
}
-}
+ /*
+ * Make sure we don't go over the "MAX_FILTERS" limit...
+ */
-/*
- * 'cupsdFreeAllJobs()' - Free all jobs from memory.
- */
-
-void
-cupsdFreeAllJobs(void)
-{
- cupsd_job_t *job; /* Current job */
+ if (cupsArrayCount(filters) > MAX_FILTERS)
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Too many filters (%d > %d), unable to print.",
+ cupsArrayCount(filters), MAX_FILTERS);
+ abort_message = "Aborting job because it needs too many filters to print.";
+ abort_state = IPP_JOB_ABORTED;
- if (!Jobs)
- return;
+ ippSetString(job->attrs, &job->reasons, 0, "document-unprintable-error");
- cupsdHoldSignals();
+ goto abort_job;
+ }
- cupsdStopAllJobs(1);
- cupsdSaveAllJobs();
+ /*
+ * Determine if we are printing a banner page or not...
+ */
- for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
- job;
- job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ if (job->job_sheets == NULL)
{
- cupsArrayRemove(Jobs, job);
- cupsArrayRemove(ActiveJobs, job);
- cupsArrayRemove(PrintingJobs, job);
-
- cupsdDeleteJob(job);
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "No job-sheets attribute.");
+ if ((job->job_sheets =
+ ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_ZERO)) != NULL)
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "... but someone added one without setting job_sheets.");
}
+ else if (job->job_sheets->num_values == 1)
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-sheets=%s",
+ job->job_sheets->values[0].string.text);
+ else
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-sheets=%s,%s",
+ job->job_sheets->values[0].string.text,
+ job->job_sheets->values[1].string.text);
- cupsdReleaseSignals();
-}
-
+ if (job->printer->type & CUPS_PRINTER_REMOTE)
+ banner_page = 0;
+ else if (job->job_sheets == NULL)
+ banner_page = 0;
+ else if (_cups_strcasecmp(job->job_sheets->values[0].string.text, "none") != 0 &&
+ job->current_file == 0)
+ banner_page = 1;
+ else if (job->job_sheets->num_values > 1 &&
+ _cups_strcasecmp(job->job_sheets->values[1].string.text, "none") != 0 &&
+ job->current_file == (job->num_files - 1))
+ banner_page = 1;
+ else
+ banner_page = 0;
-/*
- * 'cupsdFindJob()' - Find the specified job.
- */
+ if ((options = get_options(job, banner_page, copies, sizeof(copies), title,
+ sizeof(title))) == NULL)
+ {
+ abort_message = "Stopping job because the scheduler ran out of memory.";
-cupsd_job_t * /* O - Job data */
-cupsdFindJob(int id) /* I - Job ID */
-{
- cupsd_job_t key; /* Search key */
+ goto abort_job;
+ }
+ /*
+ * Build the command-line arguments for the filters. Each filter
+ * has 6 or 7 arguments:
+ *
+ * argv[0] = printer
+ * argv[1] = job ID
+ * argv[2] = username
+ * argv[3] = title
+ * argv[4] = # copies
+ * argv[5] = options
+ * argv[6] = filename (optional; normally stdin)
+ *
+ * This allows legacy printer drivers that use the old System V
+ * printing interface to be used by CUPS.
+ *
+ * For remote jobs, we send all of the files in the argument list.
+ */
- key.id = id;
+ if (job->printer->remote)
+ argv = calloc(7 + job->num_files, sizeof(char *));
+ else
+ argv = calloc(8, sizeof(char *));
- return ((cupsd_job_t *)cupsArrayFind(Jobs, &key));
-}
+ if (!argv)
+ {
+ cupsdLogMessage(CUPSD_LOG_DEBUG, "Unable to allocate argument array - %s",
+ strerror(errno));
+ abort_message = "Stopping job because the scheduler ran out of memory.";
-/*
- * 'cupsdGetPrinterJobCount()' - Get the number of pending, processing,
- * or held jobs in a printer or class.
- */
+ goto abort_job;
+ }
-int /* O - Job count */
-cupsdGetPrinterJobCount(
- const char *dest) /* I - Printer or class name */
-{
- int count; /* Job count */
- cupsd_job_t *job; /* Current job */
+ sprintf(jobid, "%d", job->id);
+ argv[0] = job->printer->name;
+ argv[1] = jobid;
+ argv[2] = job->username;
+ argv[3] = title;
+ argv[4] = copies;
+ argv[5] = options;
- for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0;
- job;
- job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
- if (job->dest && !strcasecmp(job->dest, dest))
- count ++;
+ if (job->printer->remote && job->num_files > 1)
+ {
+ for (i = 0; i < job->num_files; i ++)
+ {
+ snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
+ job->id, i + 1);
+ argv[6 + i] = strdup(filename);
+ }
+ }
+ else
+ {
+ snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
+ job->id, job->current_file + 1);
+ argv[6] = strdup(filename);
+ }
- return (count);
-}
+ for (i = 0; argv[i]; i ++)
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "argv[%d]=\"%s\"", i, argv[i]);
+ /*
+ * Create environment variable strings for the filters...
+ */
-/*
- * 'cupsdGetUserJobCount()' - Get the number of pending, processing,
- * or held jobs for a user.
- */
+ attr = ippFindAttribute(job->attrs, "attributes-natural-language",
+ IPP_TAG_LANGUAGE);
-int /* O - Job count */
-cupsdGetUserJobCount(
- const char *username) /* I - Username */
-{
- int count; /* Job count */
- cupsd_job_t *job; /* Current job */
+#ifdef __APPLE__
+ strlcpy(apple_language, "APPLE_LANGUAGE=", sizeof(apple_language));
+ _cupsAppleLanguage(attr->values[0].string.text,
+ apple_language + 15, sizeof(apple_language) - 15);
+#endif /* __APPLE__ */
+ switch (strlen(attr->values[0].string.text))
+ {
+ default :
+ /*
+ * This is an unknown or badly formatted language code; use
+ * the POSIX locale...
+ */
- for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0;
- job;
- job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
- if (!strcasecmp(job->username, username))
- count ++;
+ strlcpy(lang, "LANG=C", sizeof(lang));
+ break;
- return (count);
-}
+ case 2 :
+ /*
+ * Just the language code (ll)...
+ */
+ snprintf(lang, sizeof(lang), "LANG=%s.UTF-8",
+ attr->values[0].string.text);
+ break;
-/*
- * 'cupsdHoldJob()' - Hold the specified job.
- */
+ case 5 :
+ /*
+ * Language and country code (ll-cc)...
+ */
-void
-cupsdHoldJob(cupsd_job_t *job) /* I - Job data */
-{
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdHoldJob: id = %d", job->id);
+ snprintf(lang, sizeof(lang), "LANG=%c%c_%c%c.UTF-8",
+ attr->values[0].string.text[0],
+ attr->values[0].string.text[1],
+ toupper(attr->values[0].string.text[3] & 255),
+ toupper(attr->values[0].string.text[4] & 255));
+ break;
+ }
- if (job->state_value == IPP_JOB_PROCESSING)
- cupsdStopJob(job, 0);
+ if ((attr = ippFindAttribute(job->attrs, "document-format",
+ IPP_TAG_MIMETYPE)) != NULL &&
+ (ptr = strstr(attr->values[0].string.text, "charset=")) != NULL)
+ snprintf(charset, sizeof(charset), "CHARSET=%s", ptr + 8);
else
- cupsdLoadJob(job);
-
- DEBUG_puts("cupsdHoldJob: setting state to held...");
+ strlcpy(charset, "CHARSET=utf-8", sizeof(charset));
- job->state->values[0].integer = IPP_JOB_HELD;
- job->state_value = IPP_JOB_HELD;
- job->current_file = 0;
-
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ snprintf(content_type, sizeof(content_type), "CONTENT_TYPE=%s/%s",
+ job->filetypes[job->current_file]->super,
+ job->filetypes[job->current_file]->type);
+ snprintf(device_uri, sizeof(device_uri), "DEVICE_URI=%s",
+ job->printer->device_uri);
+ snprintf(ppd, sizeof(ppd), "PPD=%s/ppd/%s.ppd", ServerRoot,
+ job->printer->name);
+ snprintf(printer_info, sizeof(printer_name), "PRINTER_INFO=%s",
+ job->printer->info ? job->printer->info : "");
+ snprintf(printer_location, sizeof(printer_name), "PRINTER_LOCATION=%s",
+ job->printer->location ? job->printer->location : "");
+ snprintf(printer_name, sizeof(printer_name), "PRINTER=%s", job->printer->name);
+ if (job->printer->num_reasons > 0)
+ {
+ char *psrptr; /* Pointer into PRINTER_STATE_REASONS */
+ size_t psrlen; /* Size of PRINTER_STATE_REASONS */
- cupsdCheckJobs();
-}
+ for (psrlen = 22, i = 0; i < job->printer->num_reasons; i ++)
+ psrlen += strlen(job->printer->reasons[i]) + 1;
+ if ((printer_state_reasons = malloc(psrlen)) != NULL)
+ {
+ /*
+ * All of these strcpy's are safe because we allocated the psr string...
+ */
-/*
- * 'cupsdLoadAllJobs()' - Load all jobs from disk.
- */
+ strlcpy(printer_state_reasons, "PRINTER_STATE_REASONS=", psrlen);
+ for (psrptr = printer_state_reasons + 22, i = 0;
+ i < job->printer->num_reasons;
+ i ++)
+ {
+ if (i)
+ *psrptr++ = ',';
+ strlcpy(psrptr, job->printer->reasons[i],
+ psrlen - (psrptr - printer_state_reasons));
+ psrptr += strlen(psrptr);
+ }
+ }
+ }
+ snprintf(rip_max_cache, sizeof(rip_max_cache), "RIP_MAX_CACHE=%s", RIPCache);
-void
-cupsdLoadAllJobs(void)
-{
- char filename[1024]; /* Full filename of job.cache file */
- struct stat fileinfo, /* Information on job.cache file */
- dirinfo; /* Information on RequestRoot dir */
+ if (job->printer->num_auth_info_required == 1)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s",
+ job->printer->auth_info_required[0]);
+ else if (job->printer->num_auth_info_required == 2)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s,%s",
+ job->printer->auth_info_required[0],
+ job->printer->auth_info_required[1]);
+ else if (job->printer->num_auth_info_required == 3)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s,%s,%s",
+ job->printer->auth_info_required[0],
+ job->printer->auth_info_required[1],
+ job->printer->auth_info_required[2]);
+ else if (job->printer->num_auth_info_required == 4)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s,%s,%s,%s",
+ job->printer->auth_info_required[0],
+ job->printer->auth_info_required[1],
+ job->printer->auth_info_required[2],
+ job->printer->auth_info_required[3]);
+ else
+ strlcpy(auth_info_required, "AUTH_INFO_REQUIRED=none",
+ sizeof(auth_info_required));
+ envc = cupsdLoadEnv(envp, (int)(sizeof(envp) / sizeof(envp[0])));
+ envp[envc ++] = charset;
+ envp[envc ++] = lang;
+#ifdef __APPLE__
+ envp[envc ++] = apple_language;
+#endif /* __APPLE__ */
+ envp[envc ++] = ppd;
+ envp[envc ++] = rip_max_cache;
+ envp[envc ++] = content_type;
+ envp[envc ++] = device_uri;
+ envp[envc ++] = printer_info;
+ envp[envc ++] = printer_location;
+ envp[envc ++] = printer_name;
+ envp[envc ++] = printer_state_reasons ? printer_state_reasons :
+ "PRINTER_STATE_REASONS=none";
+ envp[envc ++] = banner_page ? "CUPS_FILETYPE=job-sheet" :
+ "CUPS_FILETYPE=document";
- /*
- * Create the job arrays as needed...
- */
+ if (final_content_type[0])
+ envp[envc ++] = final_content_type;
- if (!Jobs)
- Jobs = cupsArrayNew(compare_jobs, NULL);
+ if (Classification && !banner_page)
+ {
+ if ((attr = ippFindAttribute(job->attrs, "job-sheets",
+ IPP_TAG_NAME)) == NULL)
+ snprintf(classification, sizeof(classification), "CLASSIFICATION=%s",
+ Classification);
+ else if (attr->num_values > 1 &&
+ strcmp(attr->values[1].string.text, "none") != 0)
+ snprintf(classification, sizeof(classification), "CLASSIFICATION=%s",
+ attr->values[1].string.text);
+ else
+ snprintf(classification, sizeof(classification), "CLASSIFICATION=%s",
+ attr->values[0].string.text);
- if (!ActiveJobs)
- ActiveJobs = cupsArrayNew(compare_active_jobs, NULL);
+ envp[envc ++] = classification;
+ }
- if (!PrintingJobs)
- PrintingJobs = cupsArrayNew(compare_jobs, NULL);
+ if (job->dtype & CUPS_PRINTER_CLASS)
+ {
+ snprintf(class_name, sizeof(class_name), "CLASS=%s", job->dest);
+ envp[envc ++] = class_name;
+ }
- /*
- * See whether the job.cache file is older than the RequestRoot directory...
- */
+ envp[envc ++] = auth_info_required;
- snprintf(filename, sizeof(filename), "%s/job.cache", CacheDir);
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ if (job->auth_env[i])
+ envp[envc ++] = job->auth_env[i];
+ else
+ break;
- if (stat(filename, &fileinfo))
- {
- fileinfo.st_mtime = 0;
+ if (job->auth_uid)
+ envp[envc ++] = job->auth_uid;
- if (errno != ENOENT)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to get file information for \"%s\" - %s",
- filename, strerror(errno));
- }
+ envp[envc] = NULL;
- if (stat(RequestRoot, &dirinfo))
- {
- dirinfo.st_mtime = 0;
+ for (i = 0; i < envc; i ++)
+ if (!strncmp(envp[i], "AUTH_", 5))
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "envp[%d]=\"AUTH_%c****\"", i,
+ envp[i][5]);
+ else if (strncmp(envp[i], "DEVICE_URI=", 11))
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "envp[%d]=\"%s\"", i, envp[i]);
+ else
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "envp[%d]=\"DEVICE_URI=%s\"", i,
+ job->printer->sanitized_device_uri);
- if (errno != ENOENT)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to get directory information for \"%s\" - %s",
- RequestRoot, strerror(errno));
- }
+ if (job->printer->remote)
+ job->current_file = job->num_files;
+ else
+ job->current_file ++;
/*
- * Load the most recent source for job data...
+ * Now create processes for all of the filters...
*/
- if (dirinfo.st_mtime > fileinfo.st_mtime)
+ for (i = 0, slot = 0, filter = (mime_filter_t *)cupsArrayFirst(filters);
+ filter;
+ i ++, filter = (mime_filter_t *)cupsArrayNext(filters))
{
- load_request_root();
+ if (filter->filter[0] != '/')
+ snprintf(command, sizeof(command), "%s/filter/%s", ServerBin,
+ filter->filter);
+ else
+ strlcpy(command, filter->filter, sizeof(command));
- load_next_job_id(filename);
- }
- else
- load_job_cache(filename);
+ if (i < (cupsArrayCount(filters) - 1))
+ {
+ if (cupsdOpenPipe(filterfds[slot]))
+ {
+ abort_message = "Stopping job because the scheduler could not create "
+ "the filter pipes.";
- /*
- * Clean out old jobs as needed...
- */
+ goto abort_job;
+ }
+ }
+ else
+ {
+ if (job->current_file == 1 ||
+ (job->printer->pc && job->printer->pc->single_file))
+ {
+ if (strncmp(job->printer->device_uri, "file:", 5) != 0)
+ {
+ if (cupsdOpenPipe(job->print_pipes))
+ {
+ abort_message = "Stopping job because the scheduler could not "
+ "create the backend pipes.";
- if (MaxJobs > 0 && cupsArrayCount(Jobs) >= MaxJobs)
- cupsdCleanJobs();
-}
+ goto abort_job;
+ }
+ }
+ else
+ {
+ job->print_pipes[0] = -1;
+ if (!strcmp(job->printer->device_uri, "file:/dev/null") ||
+ !strcmp(job->printer->device_uri, "file:///dev/null"))
+ job->print_pipes[1] = -1;
+ else
+ {
+ if (!strncmp(job->printer->device_uri, "file:/dev/", 10))
+ job->print_pipes[1] = open(job->printer->device_uri + 5,
+ O_WRONLY | O_EXCL);
+ else if (!strncmp(job->printer->device_uri, "file:///dev/", 12))
+ job->print_pipes[1] = open(job->printer->device_uri + 7,
+ O_WRONLY | O_EXCL);
+ else if (!strncmp(job->printer->device_uri, "file:///", 8))
+ job->print_pipes[1] = open(job->printer->device_uri + 7,
+ O_WRONLY | O_CREAT | O_TRUNC, 0600);
+ else
+ job->print_pipes[1] = open(job->printer->device_uri + 5,
+ O_WRONLY | O_CREAT | O_TRUNC, 0600);
+ if (job->print_pipes[1] < 0)
+ {
+ abort_message = "Stopping job because the scheduler could not "
+ "open the output file.";
-/*
- * 'cupsdLoadJob()' - Load a single job...
- */
+ goto abort_job;
+ }
-void
-cupsdLoadJob(cupsd_job_t *job) /* I - Job */
-{
- char jobfile[1024]; /* Job filename */
- cups_file_t *fp; /* Job file */
- int fileid; /* Current file ID */
- ipp_attribute_t *attr; /* Job attribute */
- const char *dest; /* Destination name */
- cupsd_printer_t *destptr; /* Pointer to destination */
- mime_type_t **filetypes; /* New filetypes array */
- int *compressions; /* New compressions array */
+ fcntl(job->print_pipes[1], F_SETFD,
+ fcntl(job->print_pipes[1], F_GETFD) | FD_CLOEXEC);
+ }
+ }
+ }
+ filterfds[slot][0] = job->print_pipes[0];
+ filterfds[slot][1] = job->print_pipes[1];
+ }
- if (job->attrs)
- {
- if (job->state_value > IPP_JOB_STOPPED)
- job->access_time = time(NULL);
+ pid = cupsdStartProcess(command, argv, envp, filterfds[!slot][0],
+ filterfds[slot][1], job->status_pipes[1],
+ job->back_pipes[0], job->side_pipes[0], 0,
+ job->profile, job, job->filters + i);
- return;
- }
+ cupsdClosePipe(filterfds[!slot]);
- if ((job->attrs = ippNew()) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Ran out of memory for job attributes!", job->id);
- return;
- }
+ if (pid == 0)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to start filter \"%s\" - %s.",
+ filter->filter, strerror(errno));
- /*
- * Load job attributes...
- */
+ abort_message = "Stopping job because the scheduler could not execute a "
+ "filter.";
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] Loading attributes...", job->id);
+ goto abort_job;
+ }
- snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, job->id);
- if ((fp = cupsFileOpen(jobfile, "r")) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to open job control file \"%s\" - %s!",
- job->id, jobfile, strerror(errno));
- ippDelete(job->attrs);
- job->attrs = NULL;
- return;
- }
+ cupsdLogJob(job, CUPSD_LOG_INFO, "Started filter %s (PID %d)", command,
+ pid);
- if (ippReadIO(fp, (ipp_iocb_t)cupsFileRead, 1, NULL, job->attrs) != IPP_DATA)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to read job control file \"%s\"!",
- job->id, jobfile);
- cupsFileClose(fp);
- ippDelete(job->attrs);
- job->attrs = NULL;
- unlink(jobfile);
- return;
+ argv[6] = NULL;
+ slot = !slot;
}
- cupsFileClose(fp);
+ cupsArrayDelete(filters);
+ filters = NULL;
/*
- * Copy attribute data to the job object...
+ * Finally, pipe the final output into a backend process if needed...
*/
- if ((job->state = ippFindAttribute(job->attrs, "job-state",
- IPP_TAG_ENUM)) == NULL)
+ if (strncmp(job->printer->device_uri, "file:", 5) != 0)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Missing or bad job-state attribute in "
- "control file!",
- job->id);
- ippDelete(job->attrs);
- job->attrs = NULL;
- unlink(jobfile);
- return;
- }
+ if (job->current_file == 1 || job->printer->remote ||
+ (job->printer->pc && job->printer->pc->single_file))
+ {
+ sscanf(job->printer->device_uri, "%254[^:]", scheme);
+ snprintf(command, sizeof(command), "%s/backend/%s", ServerBin, scheme);
- job->state_value = (ipp_jstate_t)job->state->values[0].integer;
+ /*
+ * See if the backend needs to run as root...
+ */
- if (!job->dest)
- {
- if ((attr = ippFindAttribute(job->attrs, "job-printer-uri",
- IPP_TAG_URI)) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] No job-printer-uri attribute in control file!",
- job->id);
- ippDelete(job->attrs);
- job->attrs = NULL;
- unlink(jobfile);
- return;
- }
+ if (RunUser)
+ backroot = 0;
+ else if (stat(command, &backinfo))
+ backroot = 0;
+ else
+ backroot = !(backinfo.st_mode & (S_IRWXG | S_IRWXO));
- if ((dest = cupsdValidateDest(attr->values[0].string.text, &(job->dtype),
- &destptr)) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to queue job for destination \"%s\"!",
- job->id, attr->values[0].string.text);
- ippDelete(job->attrs);
- job->attrs = NULL;
- unlink(jobfile);
- return;
- }
+ argv[0] = job->printer->sanitized_device_uri;
- cupsdSetString(&job->dest, dest);
- }
- else if ((destptr = cupsdFindDest(job->dest)) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to queue job for destination \"%s\"!",
- job->id, job->dest);
- ippDelete(job->attrs);
- job->attrs = NULL;
- unlink(jobfile);
- return;
- }
+ filterfds[slot][0] = -1;
+ filterfds[slot][1] = -1;
- job->sheets = ippFindAttribute(job->attrs, "job-media-sheets-completed",
- IPP_TAG_INTEGER);
- job->job_sheets = ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_NAME);
+ pid = cupsdStartProcess(command, argv, envp, filterfds[!slot][0],
+ filterfds[slot][1], job->status_pipes[1],
+ job->back_pipes[1], job->side_pipes[1],
+ backroot, job->profile, job, &(job->backend));
- if (!job->priority)
- {
- if ((attr = ippFindAttribute(job->attrs, "job-priority",
- IPP_TAG_INTEGER)) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Missing or bad job-priority attribute in "
- "control file!", job->id);
- ippDelete(job->attrs);
- job->attrs = NULL;
- unlink(jobfile);
- return;
+ if (pid == 0)
+ {
+ abort_message = "Stopping job because the sheduler could not execute "
+ "the backend.";
+
+ goto abort_job;
+ }
+ else
+ {
+ cupsdLogJob(job, CUPSD_LOG_INFO, "Started backend %s (PID %d)",
+ command, pid);
+ }
}
- job->priority = attr->values[0].integer;
- }
+ if (job->current_file == job->num_files ||
+ (job->printer->pc && job->printer->pc->single_file))
+ cupsdClosePipe(job->print_pipes);
- if (!job->username)
- {
- if ((attr = ippFindAttribute(job->attrs, "job-originating-user-name",
- IPP_TAG_NAME)) == NULL)
+ if (job->current_file == job->num_files)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Missing or bad job-originating-user-name "
- "attribute in control file!", job->id);
- ippDelete(job->attrs);
- job->attrs = NULL;
- unlink(jobfile);
- return;
- }
+ cupsdClosePipe(job->back_pipes);
+ cupsdClosePipe(job->side_pipes);
- cupsdSetString(&job->username, attr->values[0].string.text);
+ close(job->status_pipes[1]);
+ job->status_pipes[1] = -1;
+ }
}
-
- /*
- * Set the job hold-until time and state...
- */
-
- if (job->state_value == IPP_JOB_HELD)
+ else
{
- if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
- IPP_TAG_KEYWORD)) == NULL)
- attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
+ filterfds[slot][0] = -1;
+ filterfds[slot][1] = -1;
- if (attr)
- cupsdSetJobHoldUntil(job, attr->values[0].string.text);
- else
+ if (job->current_file == job->num_files ||
+ (job->printer->pc && job->printer->pc->single_file))
+ cupsdClosePipe(job->print_pipes);
+
+ if (job->current_file == job->num_files)
{
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
+ close(job->status_pipes[1]);
+ job->status_pipes[1] = -1;
}
}
- else if (job->state_value == IPP_JOB_PROCESSING)
- {
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
- }
- if (!job->num_files)
- {
- /*
- * Find all the d##### files...
- */
-
- for (fileid = 1; fileid < 10000; fileid ++)
- {
- snprintf(jobfile, sizeof(jobfile), "%s/d%05d-%03d", RequestRoot,
- job->id, fileid);
+ cupsdClosePipe(filterfds[slot]);
- if (access(jobfile, 0))
- break;
+ for (i = 0; i < job->num_files; i ++)
+ free(argv[i + 6]);
- cupsdLogMessage(CUPSD_LOG_DEBUG,
- "[Job %d] Auto-typing document file \"%s\"...",
- job->id, jobfile);
+ free(argv);
- if (fileid > job->num_files)
- {
- if (job->num_files == 0)
- {
- compressions = (int *)calloc(fileid, sizeof(int));
- filetypes = (mime_type_t **)calloc(fileid, sizeof(mime_type_t *));
- }
- else
- {
- compressions = (int *)realloc(job->compressions,
- sizeof(int) * fileid);
- filetypes = (mime_type_t **)realloc(job->filetypes,
- sizeof(mime_type_t *) *
- fileid);
- }
+ if (printer_state_reasons)
+ free(printer_state_reasons);
- if (!compressions || !filetypes)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Ran out of memory for job file types!",
- job->id);
- return;
- }
+ cupsdAddSelect(job->status_buffer->fd, (cupsd_selfunc_t)update_job, NULL,
+ job);
- job->compressions = compressions;
- job->filetypes = filetypes;
- job->num_files = fileid;
- }
+ cupsdAddEvent(CUPSD_EVENT_JOB_STATE, job->printer, job, "Job #%d started.",
+ job->id);
- job->filetypes[fileid - 1] = mimeFileType(MimeDatabase, jobfile, NULL,
- job->compressions + fileid - 1);
+ return;
- if (!job->filetypes[fileid - 1])
- job->filetypes[fileid - 1] = mimeType(MimeDatabase, "application",
- "vnd.cups-raw");
- }
- }
/*
- * Load authentication information as needed...
+ * If we get here, we need to abort the current job and close out all
+ * files and pipes...
*/
- if (job->state_value < IPP_JOB_STOPPED)
- {
- snprintf(jobfile, sizeof(jobfile), "%s/a%05d", RequestRoot, job->id);
+ abort_job:
- cupsdClearString(&job->auth_username);
- cupsdClearString(&job->auth_domain);
- cupsdClearString(&job->auth_password);
+ FilterLevel -= job->cost;
+ job->cost = 0;
- if ((fp = cupsFileOpen(jobfile, "r")) != NULL)
+ for (slot = 0; slot < 2; slot ++)
+ cupsdClosePipe(filterfds[slot]);
+
+ cupsArrayDelete(filters);
+
+ if (argv)
+ {
+ if (job->printer->remote && job->num_files > 1)
{
- int i, /* Looping var */
- bytes; /* Size of auth data */
- char line[255], /* Line from file */
- data[255]; /* Decoded data */
+ for (i = 0; i < job->num_files; i ++)
+ free(argv[i + 6]);
+ }
+ free(argv);
+ }
- for (i = 0;
- i < destptr->num_auth_info_required &&
- cupsFileGets(fp, line, sizeof(line));
- i ++)
- {
- bytes = sizeof(data);
- httpDecode64_2(data, &bytes, line);
-
- if (!strcmp(destptr->auth_info_required[i], "username"))
- cupsdSetStringf(&job->auth_username, "AUTH_USERNAME=%s", data);
- else if (!strcmp(destptr->auth_info_required[i], "domain"))
- cupsdSetStringf(&job->auth_domain, "AUTH_DOMAIN=%s", data);
- else if (!strcmp(destptr->auth_info_required[i], "password"))
- cupsdSetStringf(&job->auth_password, "AUTH_PASSWORD=%s", data);
- }
+ if (printer_state_reasons)
+ free(printer_state_reasons);
- cupsFileClose(fp);
- }
- }
- job->access_time = time(NULL);
-}
+ cupsdClosePipe(job->print_pipes);
+ cupsdClosePipe(job->back_pipes);
+ cupsdClosePipe(job->side_pipes);
+ cupsdRemoveSelect(job->status_pipes[0]);
+ cupsdClosePipe(job->status_pipes);
+ cupsdStatBufDelete(job->status_buffer);
+ job->status_buffer = NULL;
-/*
- * 'cupsdMoveJob()' - Move the specified job to a different destination.
- */
+ /*
+ * Update the printer and job state.
+ */
-void
-cupsdMoveJob(cupsd_job_t *job, /* I - Job */
- cupsd_printer_t *p) /* I - Destination printer or class */
-{
- ipp_attribute_t *attr; /* job-printer-uri attribute */
- const char *olddest; /* Old destination */
- cupsd_printer_t *oldp; /* Old pointer */
+ cupsdSetJobState(job, abort_state, CUPSD_JOB_DEFAULT, "%s", abort_message);
+ cupsdSetPrinterState(job->printer, IPP_PRINTER_IDLE, 0);
+ update_job_attrs(job, 0);
+ if (job->history)
+ free_job_history(job);
+
+ cupsArrayRemove(PrintingJobs, job);
/*
- * Don't move completed jobs...
+ * Clear the printer <-> job association...
*/
- if (job->state_value > IPP_JOB_STOPPED)
- return;
+ job->printer->job = NULL;
+ job->printer = NULL;
+}
- /*
- * Get the old destination...
- */
- olddest = job->dest;
+/*
+ * 'cupsdDeleteJob()' - Free all memory used by a job.
+ */
+
+void
+cupsdDeleteJob(cupsd_job_t *job, /* I - Job */
+ cupsd_jobaction_t action)/* I - Action */
+{
+ int i; /* Looping var */
+
if (job->printer)
- oldp = job->printer;
- else
- oldp = cupsdFindDest(olddest);
+ finalize_job(job, 1);
- /*
- * Change the destination information...
- */
+ if (action == CUPSD_JOB_PURGE)
+ remove_job_history(job);
- if (job->state_value == IPP_JOB_PROCESSING)
- cupsdStopJob(job, 0);
- else
- cupsdLoadJob(job);
+ cupsdClearString(&job->username);
+ cupsdClearString(&job->dest);
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ cupsdClearString(job->auth_env + i);
+ cupsdClearString(&job->auth_uid);
+
+ if (action == CUPSD_JOB_PURGE)
+ remove_job_files(job);
+ else if (job->num_files > 0)
+ {
+ free(job->compressions);
+ free(job->filetypes);
- cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, oldp, job,
- "Job #%d moved from %s to %s.", job->id, olddest,
- p->name);
+ job->num_files = 0;
+ }
- cupsdSetString(&job->dest, p->name);
- job->dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_REMOTE |
- CUPS_PRINTER_IMPLICIT);
+ if (job->history)
+ free_job_history(job);
- if ((attr = ippFindAttribute(job->attrs, "job-printer-uri",
- IPP_TAG_URI)) != NULL)
- cupsdSetString(&(attr->values[0].string.text), p->uri);
+ unload_job(job);
- cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, p, job,
- "Job #%d moved from %s to %s.", job->id, olddest,
- p->name);
+ cupsArrayRemove(Jobs, job);
+ cupsArrayRemove(ActiveJobs, job);
+ cupsArrayRemove(PrintingJobs, job);
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ free(job);
}
/*
- * 'cupsdReleaseJob()' - Release the specified job.
+ * 'cupsdFreeAllJobs()' - Free all jobs from memory.
*/
void
-cupsdReleaseJob(cupsd_job_t *job) /* I - Job */
+cupsdFreeAllJobs(void)
{
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdReleaseJob: id = %d", job->id);
+ cupsd_job_t *job; /* Current job */
- if (job->state_value == IPP_JOB_HELD)
- {
- DEBUG_puts("cupsdReleaseJob: setting state to pending...");
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
- cupsdCheckJobs();
- }
+ if (!Jobs)
+ return;
+
+ cupsdHoldSignals();
+
+ cupsdStopAllJobs(CUPSD_JOB_FORCE, 0);
+ cupsdSaveAllJobs();
+
+ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ cupsdDeleteJob(job, CUPSD_JOB_DEFAULT);
+
+ cupsdReleaseSignals();
}
/*
- * 'cupsdRestartJob()' - Restart the specified job.
+ * 'cupsdFindJob()' - Find the specified job.
*/
-void
-cupsdRestartJob(cupsd_job_t *job) /* I - Job */
+cupsd_job_t * /* O - Job data */
+cupsdFindJob(int id) /* I - Job ID */
{
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdRestartJob: id = %d", job->id);
+ cupsd_job_t key; /* Search key */
- if (job->state_value == IPP_JOB_STOPPED || job->num_files)
- {
- ipp_jstate_t old_state; /* Old job state */
+ key.id = id;
- cupsdLoadJob(job);
+ return ((cupsd_job_t *)cupsArrayFind(Jobs, &key));
+}
- old_state = job->state_value;
- job->tries = 0;
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
+/*
+ * 'cupsdGetPrinterJobCount()' - Get the number of pending, processing,
+ * or held jobs in a printer or class.
+ */
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+int /* O - Job count */
+cupsdGetPrinterJobCount(
+ const char *dest) /* I - Printer or class name */
+{
+ int count; /* Job count */
+ cupsd_job_t *job; /* Current job */
- if (old_state > IPP_JOB_STOPPED)
- cupsArrayAdd(ActiveJobs, job);
- cupsdCheckJobs();
- }
+ for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0;
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
+ if (job->dest && !_cups_strcasecmp(job->dest, dest))
+ count ++;
+
+ return (count);
}
/*
- * 'cupsdSaveAllJobs()' - Save a summary of all jobs to disk.
+ * 'cupsdGetUserJobCount()' - Get the number of pending, processing,
+ * or held jobs for a user.
*/
-void
-cupsdSaveAllJobs(void)
+int /* O - Job count */
+cupsdGetUserJobCount(
+ const char *username) /* I - Username */
{
- int i; /* Looping var */
- cups_file_t *fp; /* Job cache file */
- char temp[1024]; /* Temporary string */
+ int count; /* Job count */
cupsd_job_t *job; /* Current job */
- time_t curtime; /* Current time */
- struct tm *curdate; /* Current date */
- snprintf(temp, sizeof(temp), "%s/job.cache", CacheDir);
- if ((fp = cupsFileOpen(temp, "w")) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to create job cache file \"%s\" - %s",
- temp, strerror(errno));
- return;
- }
+ for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0;
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
+ if (!_cups_strcasecmp(job->username, username))
+ count ++;
- cupsdLogMessage(CUPSD_LOG_INFO, "Saving job cache file \"%s\"...", temp);
+ return (count);
+}
- /*
- * Restrict access to the file...
- */
- fchown(cupsFileNumber(fp), getuid(), Group);
- fchmod(cupsFileNumber(fp), ConfigFilePerm);
+/*
+ * 'cupsdLoadAllJobs()' - Load all jobs from disk.
+ */
- /*
- * Write a small header to the file...
- */
+void
+cupsdLoadAllJobs(void)
+{
+ char filename[1024]; /* Full filename of job.cache file */
+ struct stat fileinfo, /* Information on job.cache file */
+ dirinfo; /* Information on RequestRoot dir */
- curtime = time(NULL);
- curdate = localtime(&curtime);
- strftime(temp, sizeof(temp) - 1, "%Y-%m-%d %H:%M", curdate);
- cupsFilePuts(fp, "# Job cache file for " CUPS_SVERSION "\n");
- cupsFilePrintf(fp, "# Written by cupsd on %s\n", temp);
- cupsFilePrintf(fp, "NextJobId %d\n", NextJobId);
/*
- * Write each job known to the system...
+ * Create the job arrays as needed...
*/
- for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
- job;
- job = (cupsd_job_t *)cupsArrayNext(Jobs))
- {
- cupsFilePrintf(fp, "<Job %d>\n", job->id);
- cupsFilePrintf(fp, "State %d\n", job->state_value);
- cupsFilePrintf(fp, "Priority %d\n", job->priority);
- cupsFilePrintf(fp, "Username %s\n", job->username);
- cupsFilePrintf(fp, "Destination %s\n", job->dest);
- cupsFilePrintf(fp, "DestType %d\n", job->dtype);
- cupsFilePrintf(fp, "NumFiles %d\n", job->num_files);
- for (i = 0; i < job->num_files; i ++)
- cupsFilePrintf(fp, "File %d %s/%s %d\n", i + 1, job->filetypes[i]->super,
- job->filetypes[i]->type, job->compressions[i]);
- cupsFilePuts(fp, "</Job>\n");
- }
-
- cupsFileClose(fp);
-}
+ if (!Jobs)
+ Jobs = cupsArrayNew(compare_jobs, NULL);
+ if (!ActiveJobs)
+ ActiveJobs = cupsArrayNew(compare_active_jobs, NULL);
-/*
- * 'cupsdSaveJob()' - Save a job to disk.
- */
+ if (!PrintingJobs)
+ PrintingJobs = cupsArrayNew(compare_jobs, NULL);
-void
-cupsdSaveJob(cupsd_job_t *job) /* I - Job */
-{
- char filename[1024]; /* Job control filename */
- cups_file_t *fp; /* Job file */
+ /*
+ * See whether the job.cache file is older than the RequestRoot directory...
+ */
+ snprintf(filename, sizeof(filename), "%s/job.cache", CacheDir);
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSaveJob(job=%p(%d)): job->attrs=%p",
- job, job->id, job->attrs);
+ if (stat(filename, &fileinfo))
+ {
+ fileinfo.st_mtime = 0;
- snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot, job->id);
+ if (errno != ENOENT)
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Unable to get file information for \"%s\" - %s",
+ filename, strerror(errno));
+ }
- if ((fp = cupsFileOpen(filename, "w")) == NULL)
+ if (stat(RequestRoot, &dirinfo))
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to create job control file \"%s\" - %s.",
- job->id, filename, strerror(errno));
- return;
+ dirinfo.st_mtime = 0;
+
+ if (errno != ENOENT)
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Unable to get directory information for \"%s\" - %s",
+ RequestRoot, strerror(errno));
}
- fchmod(cupsFileNumber(fp), 0600);
- fchown(cupsFileNumber(fp), RunUser, Group);
+ /*
+ * Load the most recent source for job data...
+ */
- job->attrs->state = IPP_IDLE;
+ if (dirinfo.st_mtime > fileinfo.st_mtime)
+ {
+ load_request_root();
- if (ippWriteIO(fp, (ipp_iocb_t)cupsFileWrite, 1, NULL,
- job->attrs) != IPP_DATA)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to write job control file!", job->id);
+ load_next_job_id(filename);
+ }
+ else
+ load_job_cache(filename);
- cupsFileClose(fp);
+ /*
+ * Clean out old jobs as needed...
+ */
- job->dirty = 0;
+ if (MaxJobs > 0 && cupsArrayCount(Jobs) >= MaxJobs)
+ cupsdCleanJobs();
}
/*
- * 'cupsdSetJobHoldUntil()' - Set the hold time for a job...
+ * 'cupsdLoadJob()' - Load a single job.
*/
-void
-cupsdSetJobHoldUntil(cupsd_job_t *job, /* I - Job */
- const char *when) /* I - When to resume */
+int /* O - 1 on success, 0 on failure */
+cupsdLoadJob(cupsd_job_t *job) /* I - Job */
{
- time_t curtime; /* Current time */
- struct tm *curdate; /* Current date */
- int hour; /* Hold hour */
- int minute; /* Hold minute */
- int second; /* Hold second */
-
-
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSetJobHoldUntil(%d, \"%s\")",
- job->id, when);
-
- second = 0;
+ int i; /* Looping var */
+ char jobfile[1024]; /* Job filename */
+ cups_file_t *fp; /* Job file */
+ int fileid; /* Current file ID */
+ ipp_attribute_t *attr; /* Job attribute */
+ const char *dest; /* Destination name */
+ cupsd_printer_t *destptr; /* Pointer to destination */
+ mime_type_t **filetypes; /* New filetypes array */
+ int *compressions; /* New compressions array */
- if (!strcmp(when, "indefinite") || !strcmp(when, "auth-info-required"))
- {
- /*
- * Hold indefinitely...
- */
- job->hold_until = 0;
- }
- else if (!strcmp(when, "day-time"))
+ if (job->attrs)
{
- /*
- * Hold to 6am the next morning unless local time is < 6pm.
- */
-
- curtime = time(NULL);
- curdate = localtime(&curtime);
+ if (job->state_value > IPP_JOB_STOPPED)
+ job->access_time = time(NULL);
- if (curdate->tm_hour < 18)
- job->hold_until = curtime;
- else
- job->hold_until = curtime +
- ((29 - curdate->tm_hour) * 60 + 59 -
- curdate->tm_min) * 60 + 60 - curdate->tm_sec;
+ return (1);
}
- else if (!strcmp(when, "evening") || !strcmp(when, "night"))
- {
- /*
- * Hold to 6pm unless local time is > 6pm or < 6am.
- */
-
- curtime = time(NULL);
- curdate = localtime(&curtime);
- if (curdate->tm_hour < 6 || curdate->tm_hour >= 18)
- job->hold_until = curtime;
- else
- job->hold_until = curtime +
- ((17 - curdate->tm_hour) * 60 + 59 -
- curdate->tm_min) * 60 + 60 - curdate->tm_sec;
- }
- else if (!strcmp(when, "second-shift"))
+ if ((job->attrs = ippNew()) == NULL)
{
- /*
- * Hold to 4pm unless local time is > 4pm.
- */
-
- curtime = time(NULL);
- curdate = localtime(&curtime);
-
- if (curdate->tm_hour >= 16)
- job->hold_until = curtime;
- else
- job->hold_until = curtime +
- ((15 - curdate->tm_hour) * 60 + 59 -
- curdate->tm_min) * 60 + 60 - curdate->tm_sec;
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Ran out of memory for job attributes.");
+ return (0);
}
- else if (!strcmp(when, "third-shift"))
- {
- /*
- * Hold to 12am unless local time is < 8am.
- */
- curtime = time(NULL);
- curdate = localtime(&curtime);
+ /*
+ * Load job attributes...
+ */
- if (curdate->tm_hour < 8)
- job->hold_until = curtime;
- else
- job->hold_until = curtime +
- ((23 - curdate->tm_hour) * 60 + 59 -
- curdate->tm_min) * 60 + 60 - curdate->tm_sec;
- }
- else if (!strcmp(when, "weekend"))
- {
- /*
- * Hold to weekend unless we are in the weekend.
- */
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Loading attributes...");
- curtime = time(NULL);
- curdate = localtime(&curtime);
+ snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, job->id);
+ if ((fp = cupsdOpenConfFile(jobfile)) == NULL)
+ goto error;
- if (curdate->tm_wday || curdate->tm_wday == 6)
- job->hold_until = curtime;
- else
- job->hold_until = curtime +
- (((5 - curdate->tm_wday) * 24 +
- (17 - curdate->tm_hour)) * 60 + 59 -
- curdate->tm_min) * 60 + 60 - curdate->tm_sec;
- }
- else if (sscanf(when, "%d:%d:%d", &hour, &minute, &second) >= 2)
+ if (ippReadIO(fp, (ipp_iocb_t)cupsFileRead, 1, NULL, job->attrs) != IPP_DATA)
{
- /*
- * Hold to specified GMT time (HH:MM or HH:MM:SS)...
- */
-
- curtime = time(NULL);
- curdate = gmtime(&curtime);
-
- job->hold_until = curtime +
- ((hour - curdate->tm_hour) * 60 + minute -
- curdate->tm_min) * 60 + second - curdate->tm_sec;
-
- /*
- * Hold until next day as needed...
- */
-
- if (job->hold_until < curtime)
- job->hold_until += 24 * 60 * 60;
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unable to read job control file \"%s\".", jobfile);
+ cupsFileClose(fp);
+ goto error;
}
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSetJobHoldUntil: hold_until = %d",
- (int)job->hold_until);
-}
-
-
-/*
- * 'cupsdSetJobPriority()' - Set the priority of a job, moving it up/down in
- * the list as needed.
- */
-
-void
-cupsdSetJobPriority(
- cupsd_job_t *job, /* I - Job ID */
- int priority) /* I - New priority (0 to 100) */
-{
- ipp_attribute_t *attr; /* Job attribute */
-
-
- /*
- * Don't change completed jobs...
- */
-
- if (job->state_value >= IPP_JOB_PROCESSING)
- return;
+ cupsFileClose(fp);
/*
- * Set the new priority and re-add the job into the active list...
+ * Copy attribute data to the job object...
*/
- cupsArrayRemove(ActiveJobs, job);
-
- job->priority = priority;
+ if (!ippFindAttribute(job->attrs, "time-at-creation", IPP_TAG_INTEGER))
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad time-at-creation attribute in control file.");
+ goto error;
+ }
- if ((attr = ippFindAttribute(job->attrs, "job-priority",
- IPP_TAG_INTEGER)) != NULL)
- attr->values[0].integer = priority;
- else
- ippAddInteger(job->attrs, IPP_TAG_JOB, IPP_TAG_INTEGER, "job-priority",
- priority);
+ if ((job->state = ippFindAttribute(job->attrs, "job-state",
+ IPP_TAG_ENUM)) == NULL)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad job-state attribute in control file.");
+ goto error;
+ }
- cupsArrayAdd(ActiveJobs, job);
+ job->state_value = (ipp_jstate_t)job->state->values[0].integer;
+ job->file_time = 0;
+ job->history_time = 0;
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
-}
+ if (job->state_value >= IPP_JOB_CANCELED &&
+ (attr = ippFindAttribute(job->attrs, "time-at-completed",
+ IPP_TAG_INTEGER)) != NULL)
+ {
+ if (JobHistory < INT_MAX)
+ job->history_time = attr->values[0].integer + JobHistory;
+ else
+ job->history_time = INT_MAX;
+ if (job->history_time < time(NULL))
+ goto error; /* Expired, remove from history */
-/*
- * 'cupsdStopAllJobs()' - Stop all print jobs.
- */
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
-void
-cupsdStopAllJobs(int force) /* I - 1 = Force all filters to stop */
-{
- cupsd_job_t *job; /* Current job */
+ if (JobFiles < INT_MAX)
+ job->file_time = attr->values[0].integer + JobFiles;
+ else
+ job->file_time = INT_MAX;
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
- DEBUG_puts("cupsdStopAllJobs()");
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdLoadJob: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
+ }
- for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs);
- job;
- job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
- if (job->state_value == IPP_JOB_PROCESSING)
+ if (!job->dest)
+ {
+ if ((attr = ippFindAttribute(job->attrs, "job-printer-uri",
+ IPP_TAG_URI)) == NULL)
{
- cupsdStopJob(job, force);
- job->state->values[0].integer = IPP_JOB_PENDING;
- job->state_value = IPP_JOB_PENDING;
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "No job-printer-uri attribute in control file.");
+ goto error;
}
-}
+ if ((dest = cupsdValidateDest(attr->values[0].string.text, &(job->dtype),
+ &destptr)) == NULL)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unable to queue job for destination \"%s\".",
+ attr->values[0].string.text);
+ goto error;
+ }
-/*
- * 'cupsdStopJob()' - Stop a print job.
- */
+ cupsdSetString(&job->dest, dest);
+ }
+ else if ((destptr = cupsdFindDest(job->dest)) == NULL)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unable to queue job for destination \"%s\".",
+ job->dest);
+ goto error;
+ }
-void
-cupsdStopJob(cupsd_job_t *job, /* I - Job */
- int force) /* I - 1 = Force all filters to stop */
-{
- int i; /* Looping var */
+ if ((job->reasons = ippFindAttribute(job->attrs, "job-state-reasons",
+ IPP_TAG_KEYWORD)) == NULL)
+ {
+ const char *reason; /* job-state-reason keyword */
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Adding missing job-state-reasons attribute to control file.");
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] cupsdStopJob: force = %d", job->id, force);
+ switch (job->state_value)
+ {
+ default :
+ case IPP_JOB_PENDING :
+ if (destptr->state == IPP_PRINTER_STOPPED)
+ reason = "printer-stopped";
+ else
+ reason = "none";
+ break;
- if (job->state_value != IPP_JOB_PROCESSING)
- return;
+ case IPP_JOB_HELD :
+ if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
+ IPP_TAG_ZERO)) != NULL &&
+ (attr->value_tag == IPP_TAG_NAME ||
+ attr->value_tag == IPP_TAG_NAMELANG ||
+ attr->value_tag == IPP_TAG_KEYWORD) &&
+ strcmp(attr->values[0].string.text, "no-hold"))
+ reason = "job-hold-until-specified";
+ else
+ reason = "job-incoming";
+ break;
- FilterLevel -= job->cost;
+ case IPP_JOB_PROCESSING :
+ reason = "job-printing";
+ break;
- if (job->printer->state == IPP_PRINTER_PROCESSING)
- cupsdSetPrinterState(job->printer, IPP_PRINTER_IDLE, 0);
+ case IPP_JOB_STOPPED :
+ reason = "job-stopped";
+ break;
- job->state->values[0].integer = IPP_JOB_STOPPED;
- job->state_value = IPP_JOB_STOPPED;
- job->printer->job = NULL;
- job->printer = NULL;
+ case IPP_JOB_CANCELED :
+ reason = "job-canceled-by-user";
+ break;
- job->current_file --;
+ case IPP_JOB_ABORTED :
+ reason = "aborted-by-system";
+ break;
- for (i = 0; job->filters[i]; i ++)
- if (job->filters[i] > 0)
- {
- cupsdEndProcess(job->filters[i], force);
- job->filters[i] = 0;
+ case IPP_JOB_COMPLETED :
+ reason = "job-completed-successfully";
+ break;
}
- if (job->backend > 0)
+ job->reasons = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD,
+ "job-state-reasons", NULL, reason);
+ }
+ else if (job->state_value == IPP_JOB_PENDING)
{
- cupsdEndProcess(job->backend, force);
- job->backend = 0;
+ if (destptr->state == IPP_PRINTER_STOPPED)
+ ippSetString(job->attrs, &job->reasons, 0, "printer-stopped");
+ else
+ ippSetString(job->attrs, &job->reasons, 0, "none");
}
- cupsdDestroyProfile(job->profile);
- job->profile = NULL;
-
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "[Job %d] Closing print pipes [ %d %d ]...",
- job->id, job->print_pipes[0], job->print_pipes[1]);
+ job->sheets = ippFindAttribute(job->attrs, "job-media-sheets-completed",
+ IPP_TAG_INTEGER);
+ job->job_sheets = ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_NAME);
- cupsdClosePipe(job->print_pipes);
+ if (!job->priority)
+ {
+ if ((attr = ippFindAttribute(job->attrs, "job-priority",
+ IPP_TAG_INTEGER)) == NULL)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad job-priority attribute in control file.");
+ goto error;
+ }
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "[Job %d] Closing back pipes [ %d %d ]...",
- job->id, job->back_pipes[0], job->back_pipes[1]);
+ job->priority = attr->values[0].integer;
+ }
- cupsdClosePipe(job->back_pipes);
+ if (!job->username)
+ {
+ if ((attr = ippFindAttribute(job->attrs, "job-originating-user-name",
+ IPP_TAG_NAME)) == NULL)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad job-originating-user-name "
+ "attribute in control file.");
+ goto error;
+ }
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "[Job %d] Closing side pipes [ %d %d ]...",
- job->id, job->side_pipes[0], job->side_pipes[1]);
+ cupsdSetString(&job->username, attr->values[0].string.text);
+ }
- cupsdClosePipe(job->side_pipes);
+ /*
+ * Set the job hold-until time and state...
+ */
- if (job->status_buffer)
+ if (job->state_value == IPP_JOB_HELD)
{
- /*
- * Close the pipe and clear the input bit.
- */
-
- cupsdRemoveSelect(job->status_buffer->fd);
-
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] Closing status pipes [ %d %d ]...", job->id,
- job->status_pipes[0], job->status_pipes[1]);
-
- cupsdClosePipe(job->status_pipes);
- cupsdStatBufDelete(job->status_buffer);
+ if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
+ IPP_TAG_KEYWORD)) == NULL)
+ attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
- job->status_buffer = NULL;
+ if (attr)
+ cupsdSetJobHoldUntil(job, attr->values[0].string.text, CUPSD_JOB_DEFAULT);
+ else
+ {
+ job->state->values[0].integer = IPP_JOB_PENDING;
+ job->state_value = IPP_JOB_PENDING;
+ }
+ }
+ else if (job->state_value == IPP_JOB_PROCESSING)
+ {
+ job->state->values[0].integer = IPP_JOB_PENDING;
+ job->state_value = IPP_JOB_PENDING;
}
-}
-
-
-/*
- * 'cupsdUnloadCompletedJobs()' - Flush completed job history from memory.
- */
-
-void
-cupsdUnloadCompletedJobs(void)
-{
- cupsd_job_t *job; /* Current job */
- time_t expire; /* Expiration time */
-
- expire = time(NULL) - 60;
+ if (!job->num_files)
+ {
+ /*
+ * Find all the d##### files...
+ */
- for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
- job;
- job = (cupsd_job_t *)cupsArrayNext(Jobs))
- if (job->attrs && job->state_value >= IPP_JOB_STOPPED &&
- job->access_time < expire)
+ for (fileid = 1; fileid < 10000; fileid ++)
{
- if (job->dirty)
- cupsdSaveJob(job);
+ snprintf(jobfile, sizeof(jobfile), "%s/d%05d-%03d", RequestRoot,
+ job->id, fileid);
- unload_job(job);
- }
-}
+ if (access(jobfile, 0))
+ break;
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Auto-typing document file \"%s\"...", jobfile);
-/*
- * 'compare_active_jobs()' - Compare the job IDs and priorities of two jobs.
- */
+ if (fileid > job->num_files)
+ {
+ if (job->num_files == 0)
+ {
+ compressions = (int *)calloc(fileid, sizeof(int));
+ filetypes = (mime_type_t **)calloc(fileid, sizeof(mime_type_t *));
+ }
+ else
+ {
+ compressions = (int *)realloc(job->compressions,
+ sizeof(int) * fileid);
+ filetypes = (mime_type_t **)realloc(job->filetypes,
+ sizeof(mime_type_t *) *
+ fileid);
+ }
-static int /* O - Difference */
-compare_active_jobs(void *first, /* I - First job */
- void *second, /* I - Second job */
- void *data) /* I - App data (not used) */
-{
- int diff; /* Difference */
+ if (compressions)
+ job->compressions = compressions;
+ if (filetypes)
+ job->filetypes = filetypes;
- if ((diff = ((cupsd_job_t *)second)->priority -
- ((cupsd_job_t *)first)->priority) != 0)
- return (diff);
- else
- return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id);
-}
+ if (!compressions || !filetypes)
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Ran out of memory for job file types.");
+ ippDelete(job->attrs);
+ job->attrs = NULL;
-/*
- * 'compare_jobs()' - Compare the job IDs of two jobs.
- */
+ if (job->compressions)
+ {
+ free(job->compressions);
+ job->compressions = NULL;
+ }
-static int /* O - Difference */
-compare_jobs(void *first, /* I - First job */
- void *second, /* I - Second job */
- void *data) /* I - App data (not used) */
-{
- return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id);
-}
+ if (job->filetypes)
+ {
+ free(job->filetypes);
+ job->filetypes = NULL;
+ }
+ job->num_files = 0;
+ return (0);
+ }
-/*
- * 'ipp_length()' - Compute the size of the buffer needed to hold
- * the textual IPP attributes.
- */
+ job->num_files = fileid;
+ }
-static int /* O - Size of attribute buffer */
-ipp_length(ipp_t *ipp) /* I - IPP request */
-{
- int bytes; /* Number of bytes */
- int i; /* Looping var */
- ipp_attribute_t *attr; /* Current attribute */
+ job->filetypes[fileid - 1] = mimeFileType(MimeDatabase, jobfile, NULL,
+ job->compressions + fileid - 1);
+ if (!job->filetypes[fileid - 1])
+ job->filetypes[fileid - 1] = mimeType(MimeDatabase, "application",
+ "vnd.cups-raw");
+ }
+ }
/*
- * Loop through all attributes...
+ * Load authentication information as needed...
*/
- bytes = 0;
-
- for (attr = ipp->attrs; attr != NULL; attr = attr->next)
+ if (job->state_value < IPP_JOB_STOPPED)
{
- /*
- * Skip attributes that won't be sent to filters...
- */
-
- if (attr->value_tag == IPP_TAG_MIMETYPE ||
- attr->value_tag == IPP_TAG_NAMELANG ||
- attr->value_tag == IPP_TAG_TEXTLANG ||
- attr->value_tag == IPP_TAG_URI ||
- attr->value_tag == IPP_TAG_URISCHEME)
- continue;
-
- if (strncmp(attr->name, "time-", 5) == 0)
- continue;
-
- /*
- * Add space for a leading space and commas between each value.
- * For the first attribute, the leading space isn't used, so the
- * extra byte can be used as the nul terminator...
- */
-
- bytes ++; /* " " separator */
- bytes += attr->num_values; /* "," separators */
+ snprintf(jobfile, sizeof(jobfile), "%s/a%05d", RequestRoot, job->id);
- /*
- * Boolean attributes appear as "foo,nofoo,foo,nofoo", while
- * other attributes appear as "foo=value1,value2,...,valueN".
- */
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ cupsdClearString(job->auth_env + i);
+ cupsdClearString(&job->auth_uid);
- if (attr->value_tag != IPP_TAG_BOOLEAN)
- bytes += strlen(attr->name);
- else
- bytes += attr->num_values * strlen(attr->name);
+ if ((fp = cupsFileOpen(jobfile, "r")) != NULL)
+ {
+ int bytes, /* Size of auth data */
+ linenum = 1; /* Current line number */
+ char line[65536], /* Line from file */
+ *value, /* Value from line */
+ data[65536]; /* Decoded data */
- /*
- * Now add the size required for each value in the attribute...
- */
- switch (attr->value_tag)
- {
- case IPP_TAG_INTEGER :
- case IPP_TAG_ENUM :
+ if (cupsFileGets(fp, line, sizeof(line)) &&
+ !strcmp(line, "CUPSD-AUTH-V3"))
+ {
+ i = 0;
+ while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
+ {
/*
- * Minimum value of a signed integer is -2147483647, or 11 digits.
- */
+ * Decode value...
+ */
- bytes += attr->num_values * 11;
- break;
+ if (strcmp(line, "negotiate") && strcmp(line, "uid"))
+ {
+ bytes = sizeof(data);
+ httpDecode64_2(data, &bytes, value);
+ }
- case IPP_TAG_BOOLEAN :
/*
- * Add two bytes for each false ("no") value...
- */
+ * Assign environment variables...
+ */
- for (i = 0; i < attr->num_values; i ++)
- if (!attr->values[i].boolean)
- bytes += 2;
- break;
+ if (!strcmp(line, "uid"))
+ {
+ cupsdSetStringf(&job->auth_uid, "AUTH_UID=%s", value);
+ continue;
+ }
+ else if (i >= (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0])))
+ break;
+
+ if (!strcmp(line, "username"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_USERNAME=%s", data);
+ else if (!strcmp(line, "domain"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_DOMAIN=%s", data);
+ else if (!strcmp(line, "password"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_PASSWORD=%s", data);
+ else if (!strcmp(line, "negotiate"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_NEGOTIATE=%s", value);
+ else
+ continue;
- case IPP_TAG_RANGE :
- /*
- * A range is two signed integers separated by a hyphen, or
- * 23 characters max.
- */
+ i ++;
+ }
+ }
- bytes += attr->num_values * 23;
- break;
+ cupsFileClose(fp);
+ }
+ }
- case IPP_TAG_RESOLUTION :
- /*
- * A resolution is two signed integers separated by an "x" and
- * suffixed by the units, or 26 characters max.
- */
+ job->access_time = time(NULL);
+ return (1);
- bytes += attr->num_values * 26;
- break;
+ /*
+ * If we get here then something bad happened...
+ */
- case IPP_TAG_STRING :
- case IPP_TAG_TEXT :
- case IPP_TAG_NAME :
- case IPP_TAG_KEYWORD :
- case IPP_TAG_CHARSET :
- case IPP_TAG_LANGUAGE :
- case IPP_TAG_URI :
- /*
- * Strings can contain characters that need quoting. We need
- * at least 2 * len + 2 characters to cover the quotes and
- * any backslashes in the string.
- */
+ error:
- for (i = 0; i < attr->num_values; i ++)
- bytes += 2 * strlen(attr->values[i].string.text) + 2;
- break;
+ ippDelete(job->attrs);
+ job->attrs = NULL;
- default :
- break; /* anti-compiler-warning-code */
- }
- }
+ remove_job_history(job);
+ remove_job_files(job);
- return (bytes);
+ return (0);
}
/*
- * 'load_job_cache()' - Load jobs from the job.cache file.
+ * 'cupsdMoveJob()' - Move the specified job to a different destination.
*/
-static void
-load_job_cache(const char *filename) /* I - job.cache filename */
+void
+cupsdMoveJob(cupsd_job_t *job, /* I - Job */
+ cupsd_printer_t *p) /* I - Destination printer or class */
{
- cups_file_t *fp; /* job.cache file */
- char line[1024], /* Line buffer */
- *value; /* Value on line */
- int linenum; /* Line number in file */
- cupsd_job_t *job; /* Current job */
- int jobid; /* Job ID */
- char jobfile[1024]; /* Job filename */
+ ipp_attribute_t *attr; /* job-printer-uri attribute */
+ const char *olddest; /* Old destination */
+ cupsd_printer_t *oldp; /* Old pointer */
/*
- * Open the job.cache file...
+ * Don't move completed jobs...
*/
- if ((fp = cupsFileOpen(filename, "r")) == NULL)
- {
- if (errno != ENOENT)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to open job cache file \"%s\": %s",
- filename, strerror(errno));
-
- load_request_root();
-
+ if (job->state_value > IPP_JOB_STOPPED)
return;
- }
/*
- * Read entries from the job cache file and create jobs as needed.
+ * Get the old destination...
*/
- cupsdLogMessage(CUPSD_LOG_INFO, "Loading job cache file \"%s\"...",
- filename);
+ olddest = job->dest;
- linenum = 0;
- job = NULL;
+ if (job->printer)
+ oldp = job->printer;
+ else
+ oldp = cupsdFindDest(olddest);
- while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
- {
- if (!strcasecmp(line, "NextJobId"))
- {
- if (value)
- NextJobId = atoi(value);
- }
- else if (!strcasecmp(line, "<Job"))
- {
- if (job)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Missing </Job> directive on line %d!",
- linenum);
- continue;
- }
+ /*
+ * Change the destination information...
+ */
- if (!value)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Missing job ID on line %d!", linenum);
- continue;
- }
+ if (job->state_value > IPP_JOB_HELD)
+ cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT,
+ "Stopping job prior to move.");
- jobid = atoi(value);
+ cupsdAddEvent(CUPSD_EVENT_JOB_CONFIG_CHANGED, oldp, job,
+ "Job #%d moved from %s to %s.", job->id, olddest,
+ p->name);
- if (jobid < 1)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad job ID %d on line %d!", jobid,
- linenum);
- continue;
- }
+ cupsdSetString(&job->dest, p->name);
+ job->dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_REMOTE);
- snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, jobid);
- if (access(jobfile, 0))
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "[Job %d] Files have gone away!",
- jobid);
- continue;
- }
+ if ((attr = ippFindAttribute(job->attrs, "job-printer-uri",
+ IPP_TAG_URI)) != NULL)
+ cupsdSetString(&(attr->values[0].string.text), p->uri);
- job = calloc(1, sizeof(cupsd_job_t));
- if (!job)
- {
- cupsdLogMessage(CUPSD_LOG_EMERG,
- "[Job %d] Unable to allocate memory for job!", jobid);
- break;
- }
+ cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, p, job,
+ "Job #%d moved from %s to %s.", job->id, olddest,
+ p->name);
- job->id = jobid;
- job->back_pipes[0] = -1;
- job->back_pipes[1] = -1;
- job->print_pipes[0] = -1;
- job->print_pipes[1] = -1;
- job->side_pipes[0] = -1;
- job->side_pipes[1] = -1;
- job->status_pipes[0] = -1;
- job->status_pipes[1] = -1;
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+}
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] Loading from cache...", job->id);
- }
- else if (!job)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Missing <Job #> directive on line %d!", linenum);
- continue;
- }
- else if (!strcasecmp(line, "</Job>"))
- {
- cupsArrayAdd(Jobs, job);
- if (job->state_value <= IPP_JOB_STOPPED)
- {
- cupsArrayAdd(ActiveJobs, job);
- cupsdLoadJob(job);
- }
+/*
+ * 'cupsdReleaseJob()' - Release the specified job.
+ */
- job = NULL;
- }
- else if (!value)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Missing value on line %d!", linenum);
- continue;
- }
- else if (!strcasecmp(line, "State"))
- {
- job->state_value = (ipp_jstate_t)atoi(value);
+void
+cupsdReleaseJob(cupsd_job_t *job) /* I - Job */
+{
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdReleaseJob(job=%p(%d))", job,
+ job->id);
- if (job->state_value < IPP_JOB_PENDING)
- job->state_value = IPP_JOB_PENDING;
- else if (job->state_value > IPP_JOB_COMPLETED)
- job->state_value = IPP_JOB_COMPLETED;
- }
- else if (!strcasecmp(line, "Priority"))
- {
- job->priority = atoi(value);
- }
- else if (!strcasecmp(line, "Username"))
- {
- cupsdSetString(&job->username, value);
- }
- else if (!strcasecmp(line, "Destination"))
- {
- cupsdSetString(&job->dest, value);
- }
- else if (!strcasecmp(line, "DestType"))
- {
- job->dtype = (cups_ptype_t)atoi(value);
- }
- else if (!strcasecmp(line, "NumFiles"))
- {
- job->num_files = atoi(value);
+ if (job->state_value == IPP_JOB_HELD)
+ {
+ /*
+ * Add trailing banner as needed...
+ */
- if (job->num_files < 0)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad NumFiles value %d on line %d!",
- job->num_files, linenum);
- job->num_files = 0;
- continue;
- }
+ if (job->pending_timeout)
+ cupsdTimeoutJob(job);
- if (job->num_files > 0)
- {
- snprintf(jobfile, sizeof(jobfile), "%s/d%05d-001", RequestRoot,
- job->id);
- if (access(jobfile, 0))
- {
- cupsdLogMessage(CUPSD_LOG_INFO,
- "[Job %d] Data files have gone away!", job->id);
- job->num_files = 0;
- continue;
- }
+ cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT,
+ "Job released by user.");
+ }
+}
- job->filetypes = calloc(job->num_files, sizeof(mime_type_t *));
- job->compressions = calloc(job->num_files, sizeof(int));
- if (!job->filetypes || !job->compressions)
- {
- cupsdLogMessage(CUPSD_LOG_EMERG,
- "[Job %d] Unable to allocate memory for %d files!",
- job->id, job->num_files);
- break;
- }
- }
- }
- else if (!strcasecmp(line, "File"))
- {
- int number, /* File number */
- compression; /* Compression value */
- char super[MIME_MAX_SUPER], /* MIME super type */
- type[MIME_MAX_TYPE]; /* MIME type */
+/*
+ * 'cupsdRestartJob()' - Restart the specified job.
+ */
+void
+cupsdRestartJob(cupsd_job_t *job) /* I - Job */
+{
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdRestartJob(job=%p(%d))", job,
+ job->id);
- if (sscanf(value, "%d%*[ \t]%15[^/]/%255s%d", &number, super, type,
- &compression) != 4)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File on line %d!", linenum);
- continue;
- }
+ if (job->state_value == IPP_JOB_STOPPED || job->num_files)
+ cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT,
+ "Job restarted by user.");
+}
- if (number < 1 || number > job->num_files)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File number %d on line %d!",
- number, linenum);
- continue;
- }
- number --;
+/*
+ * 'cupsdSaveAllJobs()' - Save a summary of all jobs to disk.
+ */
- job->compressions[number] = compression;
- job->filetypes[number] = mimeType(MimeDatabase, super, type);
+void
+cupsdSaveAllJobs(void)
+{
+ int i; /* Looping var */
+ cups_file_t *fp; /* job.cache file */
+ char filename[1024], /* job.cache filename */
+ temp[1024]; /* Temporary string */
+ cupsd_job_t *job; /* Current job */
+ time_t curtime; /* Current time */
+ struct tm *curdate; /* Current date */
- if (!job->filetypes[number])
- {
- /*
- * If the original MIME type is unknown, auto-type it!
- */
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unknown MIME type %s/%s for file %d!",
- job->id, super, type, number + 1);
+ snprintf(filename, sizeof(filename), "%s/job.cache", CacheDir);
+ if ((fp = cupsdCreateConfFile(filename, ConfigFilePerm)) == NULL)
+ return;
- snprintf(jobfile, sizeof(jobfile), "%s/d%05d-%03d", RequestRoot,
- job->id, number + 1);
- job->filetypes[number] = mimeFileType(MimeDatabase, jobfile, NULL,
- job->compressions + number);
+ cupsdLogMessage(CUPSD_LOG_INFO, "Saving job.cache...");
- /*
- * If that didn't work, assume it is raw...
- */
+ /*
+ * Write a small header to the file...
+ */
- if (!job->filetypes[number])
- job->filetypes[number] = mimeType(MimeDatabase, "application",
- "vnd.cups-raw");
- }
- }
- else
- cupsdLogMessage(CUPSD_LOG_ERROR, "Unknown %s directive on line %d!",
- line, linenum);
+ curtime = time(NULL);
+ curdate = localtime(&curtime);
+ strftime(temp, sizeof(temp) - 1, "%Y-%m-%d %H:%M", curdate);
+
+ cupsFilePuts(fp, "# Job cache file for " CUPS_SVERSION "\n");
+ cupsFilePrintf(fp, "# Written by cupsd on %s\n", temp);
+ cupsFilePrintf(fp, "NextJobId %d\n", NextJobId);
+
+ /*
+ * Write each job known to the system...
+ */
+
+ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ {
+ cupsFilePrintf(fp, "<Job %d>\n", job->id);
+ cupsFilePrintf(fp, "State %d\n", job->state_value);
+ cupsFilePrintf(fp, "Priority %d\n", job->priority);
+ cupsFilePrintf(fp, "HoldUntil %d\n", (int)job->hold_until);
+ cupsFilePrintf(fp, "Username %s\n", job->username);
+ cupsFilePrintf(fp, "Destination %s\n", job->dest);
+ cupsFilePrintf(fp, "DestType %d\n", job->dtype);
+ cupsFilePrintf(fp, "NumFiles %d\n", job->num_files);
+ for (i = 0; i < job->num_files; i ++)
+ cupsFilePrintf(fp, "File %d %s/%s %d\n", i + 1, job->filetypes[i]->super,
+ job->filetypes[i]->type, job->compressions[i]);
+ cupsFilePuts(fp, "</Job>\n");
}
- cupsFileClose(fp);
+ cupsdCloseCreatedConfFile(fp, filename);
}
/*
- * 'load_next_job_id()' - Load the NextJobId value from the job.cache file.
+ * 'cupsdSaveJob()' - Save a job to disk.
*/
-static void
-load_next_job_id(const char *filename) /* I - job.cache filename */
+void
+cupsdSaveJob(cupsd_job_t *job) /* I - Job */
{
- cups_file_t *fp; /* job.cache file */
- char line[1024], /* Line buffer */
- *value; /* Value on line */
- int linenum; /* Line number in file */
- int next_job_id; /* NextJobId value from line */
+ char filename[1024]; /* Job control filename */
+ cups_file_t *fp; /* Job file */
- /*
- * Read the NextJobId directive from the job.cache file and use
- * the value (if any).
- */
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSaveJob(job=%p(%d)): job->attrs=%p",
+ job, job->id, job->attrs);
- if ((fp = cupsFileOpen(filename, "r")) == NULL)
- {
- if (errno != ENOENT)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to open job cache file \"%s\": %s",
- filename, strerror(errno));
+ snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot, job->id);
+ if ((fp = cupsdCreateConfFile(filename, ConfigFilePerm & 0600)) == NULL)
return;
- }
- cupsdLogMessage(CUPSD_LOG_INFO,
- "Loading NextJobId from job cache file \"%s\"...", filename);
+ fchown(cupsFileNumber(fp), RunUser, Group);
- linenum = 0;
+ job->attrs->state = IPP_IDLE;
- while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
+ if (ippWriteIO(fp, (ipp_iocb_t)cupsFileWrite, 1, NULL,
+ job->attrs) != IPP_DATA)
{
- if (!strcasecmp(line, "NextJobId"))
- {
- if (value)
- {
- next_job_id = atoi(value);
-
- if (next_job_id > NextJobId)
- NextJobId = next_job_id;
- }
- break;
- }
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to write job control file.");
+ cupsFileClose(fp);
+ return;
}
- cupsFileClose(fp);
+ if (!cupsdCloseCreatedConfFile(fp, filename))
+ {
+ /*
+ * Remove backup file and mark this job as clean...
+ */
+
+ strlcat(filename, ".O", sizeof(filename));
+ unlink(filename);
+
+ job->dirty = 0;
+ }
}
/*
- * 'load_request_root()' - Load jobs from the RequestRoot directory.
+ * 'cupsdSetJobHoldUntil()' - Set the hold time for a job.
*/
-static void
-load_request_root(void)
+void
+cupsdSetJobHoldUntil(cupsd_job_t *job, /* I - Job */
+ const char *when, /* I - When to resume */
+ int update)/* I - Update job-hold-until attr? */
{
- cups_dir_t *dir; /* Directory */
- cups_dentry_t *dent; /* Directory entry */
- cupsd_job_t *job; /* New job */
-
+ time_t curtime; /* Current time */
+ struct tm *curdate; /* Current date */
+ int hour; /* Hold hour */
+ int minute; /* Hold minute */
+ int second = 0; /* Hold second */
- /*
- * Open the requests directory...
- */
- cupsdLogMessage(CUPSD_LOG_DEBUG, "Scanning %s for jobs...", RequestRoot);
+ cupsdLogMessage(CUPSD_LOG_DEBUG2,
+ "cupsdSetJobHoldUntil(job=%p(%d), when=\"%s\", update=%d)",
+ job, job->id, when, update);
- if ((dir = cupsDirOpen(RequestRoot)) == NULL)
+ if (update)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to open spool directory \"%s\": %s",
- RequestRoot, strerror(errno));
- return;
+ /*
+ * Update the job-hold-until attribute...
+ */
+
+ ipp_attribute_t *attr; /* job-hold-until attribute */
+
+ if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
+ IPP_TAG_KEYWORD)) == NULL)
+ attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
+
+ if (attr)
+ cupsdSetString(&(attr->values[0].string.text), when);
+ else
+ attr = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD,
+ "job-hold-until", NULL, when);
+
+ if (attr)
+ {
+ if (isdigit(when[0] & 255))
+ attr->value_tag = IPP_TAG_NAME;
+ else
+ attr->value_tag = IPP_TAG_KEYWORD;
+
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ }
+
+ ippSetString(job->attrs, &job->reasons, 0, "job-hold-until-specified");
}
/*
- * Read all the c##### files...
+ * Update the hold time...
*/
- while ((dent = cupsDirRead(dir)) != NULL)
- if (strlen(dent->filename) >= 6 && dent->filename[0] == 'c')
- {
- /*
- * Allocate memory for the job...
- */
+ job->cancel_time = 0;
- if ((job = calloc(sizeof(cupsd_job_t), 1)) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Ran out of memory for jobs!");
- cupsDirClose(dir);
- return;
- }
+ if (!strcmp(when, "indefinite") || !strcmp(when, "auth-info-required"))
+ {
+ /*
+ * Hold indefinitely...
+ */
- /*
- * Assign the job ID...
- */
+ job->hold_until = 0;
- job->id = atoi(dent->filename + 1);
- job->back_pipes[0] = -1;
- job->back_pipes[1] = -1;
- job->print_pipes[0] = -1;
- job->print_pipes[1] = -1;
- job->side_pipes[0] = -1;
- job->side_pipes[1] = -1;
- job->status_pipes[0] = -1;
- job->status_pipes[1] = -1;
+ if (MaxHoldTime > 0)
+ job->cancel_time = time(NULL) + MaxHoldTime;
+ }
+ else if (!strcmp(when, "day-time"))
+ {
+ /*
+ * Hold to 6am the next morning unless local time is < 6pm.
+ */
- if (job->id >= NextJobId)
- NextJobId = job->id + 1;
+ curtime = time(NULL);
+ curdate = localtime(&curtime);
- /*
- * Load the job...
- */
+ if (curdate->tm_hour < 18)
+ job->hold_until = curtime;
+ else
+ job->hold_until = curtime +
+ ((29 - curdate->tm_hour) * 60 + 59 -
+ curdate->tm_min) * 60 + 60 - curdate->tm_sec;
+ }
+ else if (!strcmp(when, "evening") || !strcmp(when, "night"))
+ {
+ /*
+ * Hold to 6pm unless local time is > 6pm or < 6am.
+ */
- cupsdLoadJob(job);
+ curtime = time(NULL);
+ curdate = localtime(&curtime);
- /*
- * Insert the job into the array, sorting by job priority and ID...
- */
+ if (curdate->tm_hour < 6 || curdate->tm_hour >= 18)
+ job->hold_until = curtime;
+ else
+ job->hold_until = curtime +
+ ((17 - curdate->tm_hour) * 60 + 59 -
+ curdate->tm_min) * 60 + 60 - curdate->tm_sec;
+ }
+ else if (!strcmp(when, "second-shift"))
+ {
+ /*
+ * Hold to 4pm unless local time is > 4pm.
+ */
- cupsArrayAdd(Jobs, job);
+ curtime = time(NULL);
+ curdate = localtime(&curtime);
- if (job->state_value <= IPP_JOB_STOPPED)
- cupsArrayAdd(ActiveJobs, job);
- else
- unload_job(job);
- }
+ if (curdate->tm_hour >= 16)
+ job->hold_until = curtime;
+ else
+ job->hold_until = curtime +
+ ((15 - curdate->tm_hour) * 60 + 59 -
+ curdate->tm_min) * 60 + 60 - curdate->tm_sec;
+ }
+ else if (!strcmp(when, "third-shift"))
+ {
+ /*
+ * Hold to 12am unless local time is < 8am.
+ */
- cupsDirClose(dir);
-}
+ curtime = time(NULL);
+ curdate = localtime(&curtime);
+
+ if (curdate->tm_hour < 8)
+ job->hold_until = curtime;
+ else
+ job->hold_until = curtime +
+ ((23 - curdate->tm_hour) * 60 + 59 -
+ curdate->tm_min) * 60 + 60 - curdate->tm_sec;
+ }
+ else if (!strcmp(when, "weekend"))
+ {
+ /*
+ * Hold to weekend unless we are in the weekend.
+ */
+ curtime = time(NULL);
+ curdate = localtime(&curtime);
-/*
- * 'set_time()' - Set one of the "time-at-xyz" attributes...
- */
+ if (curdate->tm_wday == 0 || curdate->tm_wday == 6)
+ job->hold_until = curtime;
+ else
+ job->hold_until = curtime +
+ (((5 - curdate->tm_wday) * 24 +
+ (17 - curdate->tm_hour)) * 60 + 59 -
+ curdate->tm_min) * 60 + 60 - curdate->tm_sec;
+ }
+ else if (sscanf(when, "%d:%d:%d", &hour, &minute, &second) >= 2)
+ {
+ /*
+ * Hold to specified GMT time (HH:MM or HH:MM:SS)...
+ */
-static void
-set_time(cupsd_job_t *job, /* I - Job to update */
- const char *name) /* I - Name of attribute */
-{
- ipp_attribute_t *attr; /* Time attribute */
+ curtime = time(NULL);
+ curdate = gmtime(&curtime);
+ job->hold_until = curtime +
+ ((hour - curdate->tm_hour) * 60 + minute -
+ curdate->tm_min) * 60 + second - curdate->tm_sec;
- if ((attr = ippFindAttribute(job->attrs, name, IPP_TAG_ZERO)) != NULL)
- {
- attr->value_tag = IPP_TAG_INTEGER;
- attr->values[0].integer = time(NULL);
+ /*
+ * Hold until next day as needed...
+ */
+
+ if (job->hold_until < curtime)
+ job->hold_until += 24 * 60 * 60;
}
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSetJobHoldUntil: hold_until=%d",
+ (int)job->hold_until);
}
/*
- * 'set_hold_until()' - Set the hold time and update job-hold-until attribute...
+ * 'cupsdSetJobPriority()' - Set the priority of a job, moving it up/down in
+ * the list as needed.
*/
-static void
-set_hold_until(cupsd_job_t *job, /* I - Job to update */
- time_t holdtime) /* I - Hold until time */
+void
+cupsdSetJobPriority(
+ cupsd_job_t *job, /* I - Job ID */
+ int priority) /* I - New priority (0 to 100) */
{
- ipp_attribute_t *attr; /* job-hold-until attribute */
- struct tm *holddate; /* Hold date */
- char holdstr[64]; /* Hold time */
+ ipp_attribute_t *attr; /* Job attribute */
/*
- * Set the hold_until value and hold the job...
+ * Don't change completed jobs...
*/
- cupsdLogMessage(CUPSD_LOG_DEBUG, "set_hold_until: hold_until = %d",
- (int)holdtime);
-
- job->state->values[0].integer = IPP_JOB_HELD;
- job->state_value = IPP_JOB_HELD;
- job->hold_until = holdtime;
+ if (job->state_value >= IPP_JOB_PROCESSING)
+ return;
/*
- * Update the job-hold-until attribute with a string representing GMT
- * time (HH:MM:SS)...
+ * Set the new priority and re-add the job into the active list...
*/
- holddate = gmtime(&holdtime);
- snprintf(holdstr, sizeof(holdstr), "%d:%d:%d", holddate->tm_hour,
- holddate->tm_min, holddate->tm_sec);
-
- if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
- IPP_TAG_KEYWORD)) == NULL)
- attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
+ cupsArrayRemove(ActiveJobs, job);
- /*
- * Either add the attribute or update the value of the existing one
- */
+ job->priority = priority;
- if (attr == NULL)
- attr = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD,
- "job-hold-until", NULL, holdstr);
+ if ((attr = ippFindAttribute(job->attrs, "job-priority",
+ IPP_TAG_INTEGER)) != NULL)
+ attr->values[0].integer = priority;
else
- cupsdSetString(&attr->values[0].string.text, holdstr);
+ ippAddInteger(job->attrs, IPP_TAG_JOB, IPP_TAG_INTEGER, "job-priority",
+ priority);
+
+ cupsArrayAdd(ActiveJobs, job);
job->dirty = 1;
cupsdMarkDirty(CUPSD_DIRTY_JOBS);
/*
- * 'start_job()' - Start a print job.
+ * 'cupsdSetJobState()' - Set the state of the specified print job.
*/
-static void
-start_job(cupsd_job_t *job, /* I - Job ID */
- cupsd_printer_t *printer) /* I - Printer to print job */
+void
+cupsdSetJobState(
+ cupsd_job_t *job, /* I - Job to cancel */
+ ipp_jstate_t newstate, /* I - New job state */
+ cupsd_jobaction_t action, /* I - Action to take */
+ const char *message, /* I - Message to log */
+ ...) /* I - Additional arguments as needed */
{
int i; /* Looping var */
- int slot; /* Pipe slot */
- cups_array_t *filters, /* Filters for job */
- *prefilters; /* Filters with prefilters */
- mime_filter_t *filter, /* Current filter */
- *prefilter, /* Prefilter */
- port_monitor; /* Port monitor filter */
- char method[255], /* Method for output */
- *optptr, /* Pointer to options */
- *valptr; /* Pointer in value string */
- ipp_attribute_t *attr; /* Current attribute */
- struct stat backinfo; /* Backend file information */
- int backroot; /* Run backend as root? */
- int pid; /* Process ID of new filter process */
- int banner_page; /* 1 if banner page, 0 otherwise */
- int filterfds[2][2];/* Pipes used between filters */
- int envc; /* Number of environment variables */
- char **argv, /* Filter command-line arguments */
- sani_uri[1024], /* Sanitized DEVICE_URI env var */
- filename[1024], /* Job filename */
- command[1024], /* Full path to command */
- jobid[255], /* Job ID string */
- title[IPP_MAX_NAME],
- /* Job title string */
- copies[255], /* # copies string */
- *envp[MAX_ENV + 16],
- /* Environment variables */
- charset[255], /* CHARSET env variable */
- class_name[255],/* CLASS env variable */
- classification[1024],
- /* CLASSIFICATION env variable */
- content_type[1024],
- /* CONTENT_TYPE env variable */
- device_uri[1024],
- /* DEVICE_URI env variable */
- final_content_type[1024],
- /* FINAL_CONTENT_TYPE env variable */
- lang[255], /* LANG env variable */
-#ifdef __APPLE__
- apple_language[255],
- /* APPLE_LANGUAGE env variable */
-#endif /* __APPLE__ */
- ppd[1024], /* PPD env variable */
- printer_name[255],
- /* PRINTER env variable */
- rip_max_cache[255];
- /* RIP_MAX_CACHE env variable */
- static char *options = NULL;/* Full list of options */
- static int optlength = 0; /* Length of option buffer */
-
+ ipp_jstate_t oldstate; /* Old state */
+ char filename[1024]; /* Job filename */
+ ipp_attribute_t *attr; /* Job attribute */
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "[Job %d] start_job: file = %d/%d",
- job->id, job->current_file, job->num_files);
- if (job->num_files == 0)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "[Job %d] No files, canceling job!",
- job->id);
+ cupsdLogMessage(CUPSD_LOG_DEBUG2,
+ "cupsdSetJobState(job=%p(%d), state=%d, newstate=%d, "
+ "action=%d, message=\"%s\")", job, job->id, job->state_value,
+ newstate, action, message ? message : "(null)");
- cupsdCancelJob(job, 0, IPP_JOB_ABORTED);
- return;
- }
/*
- * Figure out what filters are required to convert from
- * the source to the destination type...
+ * Make sure we have the job attributes...
*/
- filters = NULL;
- job->cost = 0;
-
- if (printer->raw)
- {
- /*
- * Remote jobs and raw queues go directly to the printer without
- * filtering...
- */
-
- cupsdLogMessage(CUPSD_LOG_DEBUG,
- "[Job %d] Sending job to queue tagged as raw...", job->id);
-
- filters = NULL;
- }
- else
- {
- /*
- * Local jobs get filtered...
- */
-
- filters = mimeFilter(MimeDatabase, job->filetypes[job->current_file],
- printer->filetype, &(job->cost));
-
- if (!filters)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to convert file %d to printable format!",
- job->current_file, job->id);
- cupsdLogMessage(CUPSD_LOG_INFO,
- "Hint: Do you have Ghostscript installed?");
+ if (!cupsdLoadJob(job))
+ return;
- if (LogLevel < CUPSD_LOG_DEBUG)
- cupsdLogMessage(CUPSD_LOG_INFO,
- "Hint: Try setting the LogLevel to \"debug\".");
+ /*
+ * Don't do anything if the state is unchanged and we aren't purging the
+ * job...
+ */
- job->current_file ++;
+ oldstate = job->state_value;
+ if (newstate == oldstate && action != CUPSD_JOB_PURGE)
+ return;
- if (job->current_file == job->num_files)
- cupsdCancelJob(job, 0, IPP_JOB_ABORTED);
+ /*
+ * Stop any processes that are working on the current job...
+ */
- return;
- }
+ if (oldstate == IPP_JOB_PROCESSING)
+ stop_job(job, action);
- /*
- * Remove NULL ("-") filters...
- */
+ /*
+ * Set the new job state...
+ */
- for (filter = (mime_filter_t *)cupsArrayFirst(filters);
- filter;
- filter = (mime_filter_t *)cupsArrayNext(filters))
- if (!strcmp(filter->filter, "-"))
- cupsArrayRemove(filters, filter);
+ job->state_value = newstate;
- if (cupsArrayCount(filters) == 0)
- {
- cupsArrayDelete(filters);
- filters = NULL;
- }
+ if (job->state)
+ job->state->values[0].integer = newstate;
- /*
- * If this printer has any pre-filters, insert the required pre-filter
- * in the filters array...
- */
+ switch (newstate)
+ {
+ case IPP_JOB_PENDING :
+ /*
+ * Update job-hold-until as needed...
+ */
- if (printer->prefiltertype && filters)
- {
- prefilters = cupsArrayNew(NULL, NULL);
+ if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
+ IPP_TAG_KEYWORD)) == NULL)
+ attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
- for (filter = (mime_filter_t *)cupsArrayFirst(filters);
- filter;
- filter = (mime_filter_t *)cupsArrayNext(filters))
- {
- if ((prefilter = mimeFilterLookup(MimeDatabase, filter->src,
- printer->prefiltertype)))
+ if (attr)
{
- cupsArrayAdd(prefilters, prefilter);
- job->cost += prefilter->cost;
+ attr->value_tag = IPP_TAG_KEYWORD;
+ cupsdSetString(&(attr->values[0].string.text), "no-hold");
}
- cupsArrayAdd(prefilters, filter);
- }
+ default :
+ break;
- cupsArrayDelete(filters);
- filters = prefilters;
- }
+ case IPP_JOB_ABORTED :
+ case IPP_JOB_CANCELED :
+ case IPP_JOB_COMPLETED :
+ set_time(job, "time-at-completed");
+ ippSetString(job->attrs, &job->reasons, 0, "processing-to-stop-point");
+ break;
}
/*
- * Set a minimum cost of 100 for all jobs so that FilterLimit
- * works with raw queues and other low-cost paths.
- */
-
- if (job->cost < 100)
- job->cost = 100;
-
- /*
- * See if the filter cost is too high...
+ * Log message as needed...
*/
- if ((FilterLevel + job->cost) > FilterLimit && FilterLevel > 0 &&
- FilterLimit > 0)
+ if (message)
{
- /*
- * Don't print this job quite yet...
- */
+ char buffer[2048]; /* Message buffer */
+ va_list ap; /* Pointer to additional arguments */
- cupsArrayDelete(filters);
+ va_start(ap, message);
+ vsnprintf(buffer, sizeof(buffer), message, ap);
+ va_end(ap);
- cupsdLogMessage(CUPSD_LOG_INFO,
- "[Job %d] Holding because filter limit has been reached.",
- job->id);
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: file=%d, cost=%d, level=%d, limit=%d",
- job->id, job->current_file, job->cost, FilterLevel,
- FilterLimit);
- return;
- }
+ if (newstate > IPP_JOB_STOPPED)
+ cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job, "%s", buffer);
+ else
+ cupsdAddEvent(CUPSD_EVENT_JOB_STATE, job->printer, job, "%s", buffer);
- FilterLevel += job->cost;
+ if (newstate == IPP_JOB_STOPPED || newstate == IPP_JOB_ABORTED)
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "%s", buffer);
+ else
+ cupsdLogJob(job, CUPSD_LOG_INFO, "%s", buffer);
+ }
/*
- * Add decompression/raw filter as needed...
+ * Handle post-state-change actions...
*/
- if ((!printer->raw && job->compressions[job->current_file]) ||
- (!filters && !printer->remote &&
- (job->num_files > 1 || !strncmp(printer->device_uri, "file:", 5))))
+ switch (newstate)
{
- /*
- * Add gziptoany filter to the front of the list...
- */
+ case IPP_JOB_PROCESSING :
+ /*
+ * Add the job to the "printing" list...
+ */
- if (!filters)
- filters = cupsArrayNew(NULL, NULL);
+ if (!cupsArrayFind(PrintingJobs, job))
+ cupsArrayAdd(PrintingJobs, job);
- if (!cupsArrayInsert(filters, &gziptoany_filter))
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to add decompression filter - %s",
- job->id, strerror(errno));
+ /*
+ * Set the processing time...
+ */
- cupsArrayDelete(filters);
+ set_time(job, "time-at-processing");
- job->current_file ++;
+ case IPP_JOB_PENDING :
+ case IPP_JOB_HELD :
+ case IPP_JOB_STOPPED :
+ /*
+ * Make sure the job is in the active list...
+ */
- if (job->current_file == job->num_files)
- cupsdCancelJob(job, 0, IPP_JOB_ABORTED);
+ if (!cupsArrayFind(ActiveJobs, job))
+ cupsArrayAdd(ActiveJobs, job);
- return;
- }
- }
+ /*
+ * Save the job state to disk...
+ */
- /*
- * Add port monitor, if any...
- */
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ break;
- if (printer->port_monitor)
- {
- /*
- * Add port monitor to the end of the list...
- */
+ case IPP_JOB_ABORTED :
+ case IPP_JOB_CANCELED :
+ case IPP_JOB_COMPLETED :
+ if (newstate == IPP_JOB_CANCELED)
+ {
+ /*
+ * Remove the job from the active list if there are no processes still
+ * running for it...
+ */
- if (!filters)
- filters = cupsArrayNew(NULL, NULL);
+ for (i = 0; job->filters[i] < 0; i++);
- port_monitor.src = NULL;
- port_monitor.dst = NULL;
- port_monitor.cost = 0;
+ if (!job->filters[i] && job->backend <= 0)
+ cupsArrayRemove(ActiveJobs, job);
+ }
+ else
+ {
+ /*
+ * Otherwise just remove the job from the active list immediately...
+ */
- snprintf(port_monitor.filter, sizeof(port_monitor.filter),
- "%s/monitor/%s", ServerBin, printer->port_monitor);
+ cupsArrayRemove(ActiveJobs, job);
+ }
- if (!cupsArrayAdd(filters, &port_monitor))
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to add port monitor - %s",
- job->id, strerror(errno));
+ /*
+ * Expire job subscriptions since the job is now "completed"...
+ */
- cupsArrayDelete(filters);
+ cupsdExpireSubscriptions(NULL, job);
- job->current_file ++;
+#ifdef __APPLE__
+ /*
+ * If we are going to sleep and the PrintingJobs count is now 0, allow the
+ * sleep to happen immediately...
+ */
- if (job->current_file == job->num_files)
- cupsdCancelJob(job, 0, IPP_JOB_ABORTED);
+ if (Sleeping && cupsArrayCount(PrintingJobs) == 0)
+ cupsdAllowSleep();
+#endif /* __APPLE__ */
- return;
- }
- }
+ /*
+ * Remove any authentication data...
+ */
- /*
- * Make sure we don't go over the "MAX_FILTERS" limit...
- */
+ snprintf(filename, sizeof(filename), "%s/a%05d", RequestRoot, job->id);
+ if (cupsdRemoveFile(filename) && errno != ENOENT)
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Unable to remove authentication cache: %s",
+ strerror(errno));
- if (cupsArrayCount(filters) > MAX_FILTERS)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Too many filters (%d > %d), unable to print!",
- job->id, cupsArrayCount(filters), MAX_FILTERS);
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ cupsdClearString(job->auth_env + i);
- cupsArrayDelete(filters);
- cupsdCancelJob(job, 0, IPP_JOB_STOPPED);
+ cupsdClearString(&job->auth_uid);
- return;
+ /*
+ * Remove the print file for good if we aren't preserving jobs or
+ * files...
+ */
+
+ if (!JobHistory || !JobFiles || action == CUPSD_JOB_PURGE)
+ remove_job_files(job);
+
+ if (JobHistory && action != CUPSD_JOB_PURGE)
+ {
+ /*
+ * Save job state info...
+ */
+
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ }
+ else if (!job->printer)
+ {
+ /*
+ * Delete the job immediately if not actively printing...
+ */
+
+ cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+ job = NULL;
+ }
+ break;
}
/*
- * Update the printer and job state to "processing"...
+ * Finalize the job immediately if we forced things...
*/
- job->state->values[0].integer = IPP_JOB_PROCESSING;
- job->state_value = IPP_JOB_PROCESSING;
+ if (action >= CUPSD_JOB_FORCE && job && job->printer)
+ finalize_job(job, 0);
- job->status = 0;
- job->printer = printer;
- printer->job = job;
-
- cupsdSetPrinterState(printer, IPP_PRINTER_PROCESSING, 0);
+ /*
+ * Update the server "busy" state...
+ */
- if (job->current_file == 0)
- {
- /*
- * Add to the printing list...
- */
+ cupsdSetBusyState();
+}
- cupsArrayAdd(PrintingJobs, job);
- cupsdSetBusyState();
- /*
- * Set the processing time...
- */
+/*
+ * 'cupsdStopAllJobs()' - Stop all print jobs.
+ */
- set_time(job, "time-at-processing");
+void
+cupsdStopAllJobs(
+ cupsd_jobaction_t action, /* I - Action */
+ int kill_delay) /* I - Number of seconds before we kill */
+{
+ cupsd_job_t *job; /* Current job */
- /*
- * Create the backchannel pipes and make them non-blocking...
- */
- cupsdOpenPipe(job->back_pipes);
+ DEBUG_puts("cupsdStopAllJobs()");
- fcntl(job->back_pipes[0], F_SETFL,
- fcntl(job->back_pipes[0], F_GETFL) | O_NONBLOCK);
+ for (job = (cupsd_job_t *)cupsArrayFirst(PrintingJobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(PrintingJobs))
+ {
+ if (kill_delay)
+ job->kill_time = time(NULL) + kill_delay;
- fcntl(job->back_pipes[1], F_SETFL,
- fcntl(job->back_pipes[1], F_GETFL) | O_NONBLOCK);
+ cupsdSetJobState(job, IPP_JOB_PENDING, action, NULL);
+ }
+}
- /*
- * Create the side-channel pipes and make them non-blocking...
- */
- socketpair(AF_LOCAL, SOCK_STREAM, 0, job->side_pipes);
+/*
+ * 'cupsdUnloadCompletedJobs()' - Flush completed job history from memory.
+ */
- fcntl(job->side_pipes[0], F_SETFL,
- fcntl(job->side_pipes[0], F_GETFL) | O_NONBLOCK);
+void
+cupsdUnloadCompletedJobs(void)
+{
+ cupsd_job_t *job; /* Current job */
+ time_t expire; /* Expiration time */
- fcntl(job->side_pipes[1], F_SETFL,
- fcntl(job->side_pipes[1], F_GETFL) | O_NONBLOCK);
- }
- /*
- * Determine if we are printing a banner page or not...
- */
+ expire = time(NULL) - 60;
- if (job->job_sheets == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] No job-sheets attribute.",
- job->id);
- if ((job->job_sheets =
- ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_ZERO)) != NULL)
- cupsdLogMessage(CUPSD_LOG_DEBUG,
- "[Job %d] ... but someone added one without setting "
- "job_sheets!", job->id);
- }
- else if (job->job_sheets->num_values == 1)
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] job-sheets=%s", job->id,
- job->job_sheets->values[0].string.text);
- else
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] job-sheets=%s,%s", job->id,
- job->job_sheets->values[0].string.text,
- job->job_sheets->values[1].string.text);
+ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ if (job->attrs && job->state_value >= IPP_JOB_STOPPED && !job->printer &&
+ job->access_time < expire)
+ {
+ if (job->dirty)
+ cupsdSaveJob(job);
- if (printer->type & (CUPS_PRINTER_REMOTE | CUPS_PRINTER_IMPLICIT))
- banner_page = 0;
- else if (job->job_sheets == NULL)
- banner_page = 0;
- else if (strcasecmp(job->job_sheets->values[0].string.text, "none") != 0 &&
- job->current_file == 0)
- banner_page = 1;
- else if (job->job_sheets->num_values > 1 &&
- strcasecmp(job->job_sheets->values[1].string.text, "none") != 0 &&
- job->current_file == (job->num_files - 1))
- banner_page = 1;
- else
- banner_page = 0;
+ unload_job(job);
+ }
+}
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] banner_page = %d", job->id,
- banner_page);
- /*
- * Building the options string is harder than it needs to be, but
- * for the moment we need to pass strings for command-line args and
- * not IPP attribute pointers... :)
- *
- * First allocate/reallocate the option buffer as needed...
- */
+/*
+ * 'cupsdUpdateJobs()' - Update the history/file files for all jobs.
+ */
- i = ipp_length(job->attrs);
+void
+cupsdUpdateJobs(void)
+{
+ cupsd_job_t *job; /* Current job */
+ time_t curtime; /* Current time */
+ ipp_attribute_t *attr; /* time-at-completed attribute */
- if (i > optlength)
- {
- if (optlength == 0)
- optptr = malloc(i);
- else
- optptr = realloc(options, i);
- if (optptr == NULL)
+ curtime = time(NULL);
+ JobHistoryUpdate = 0;
+
+ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ {
+ if (job->state_value >= IPP_JOB_CANCELED &&
+ (attr = ippFindAttribute(job->attrs, "time-at-completed",
+ IPP_TAG_INTEGER)) != NULL)
{
- cupsdLogMessage(CUPSD_LOG_CRIT,
- "[Job %d] Unable to allocate %d bytes for option buffer!",
- job->id, i);
+ /*
+ * Update history/file expiration times...
+ */
- cupsArrayDelete(filters);
+ if (JobHistory < INT_MAX)
+ job->history_time = attr->values[0].integer + JobHistory;
+ else
+ job->history_time = INT_MAX;
+
+ if (job->history_time < curtime)
+ {
+ cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+ continue;
+ }
- FilterLevel -= job->cost;
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
- cupsdCancelJob(job, 0, IPP_JOB_ABORTED);
- return;
- }
+ if (JobFiles < INT_MAX)
+ job->file_time = attr->values[0].integer + JobFiles;
+ else
+ job->file_time = INT_MAX;
- options = optptr;
- optlength = i;
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
+ }
}
- /*
- * Now loop through the attributes and convert them to the textual
- * representation used by the filters...
- */
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdUpdateAllJobs: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
+}
- optptr = options;
- *optptr = '\0';
- snprintf(title, sizeof(title), "%s-%d", printer->name, job->id);
- strcpy(copies, "1");
+/*
+ * 'compare_active_jobs()' - Compare the job IDs and priorities of two jobs.
+ */
- for (attr = job->attrs->attrs; attr != NULL; attr = attr->next)
- {
- if (!strcmp(attr->name, "copies") &&
- attr->value_tag == IPP_TAG_INTEGER)
- {
- /*
- * Don't use the # copies attribute if we are printing the job sheets...
- */
+static int /* O - Difference */
+compare_active_jobs(void *first, /* I - First job */
+ void *second, /* I - Second job */
+ void *data) /* I - App data (not used) */
+{
+ int diff; /* Difference */
- if (!banner_page)
- sprintf(copies, "%d", attr->values[0].integer);
- }
- else if (!strcmp(attr->name, "job-name") &&
- (attr->value_tag == IPP_TAG_NAME ||
- attr->value_tag == IPP_TAG_NAMELANG))
- strlcpy(title, attr->values[0].string.text, sizeof(title));
- else if (attr->group_tag == IPP_TAG_JOB)
- {
- /*
- * Filter out other unwanted attributes...
- */
- if (attr->value_tag == IPP_TAG_MIMETYPE ||
- attr->value_tag == IPP_TAG_NAMELANG ||
- attr->value_tag == IPP_TAG_TEXTLANG ||
- (attr->value_tag == IPP_TAG_URI && strcmp(attr->name, "job-uuid")) ||
- attr->value_tag == IPP_TAG_URISCHEME ||
- attr->value_tag == IPP_TAG_BEGIN_COLLECTION) /* Not yet supported */
- continue;
+ (void)data;
- if (!strncmp(attr->name, "time-", 5))
- continue;
+ if ((diff = ((cupsd_job_t *)second)->priority -
+ ((cupsd_job_t *)first)->priority) != 0)
+ return (diff);
+ else
+ return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id);
+}
- if (!strncmp(attr->name, "job-", 4) && strcmp(attr->name, "job-uuid") &&
- !(printer->type & CUPS_PRINTER_REMOTE))
- continue;
- if (!strncmp(attr->name, "job-", 4) &&
- strcmp(attr->name, "job-uuid") &&
- strcmp(attr->name, "job-billing") &&
- strcmp(attr->name, "job-sheets") &&
- strcmp(attr->name, "job-hold-until") &&
- strcmp(attr->name, "job-priority"))
- continue;
+/*
+ * 'compare_jobs()' - Compare the job IDs of two jobs.
+ */
- if ((!strcmp(attr->name, "page-label") ||
- !strcmp(attr->name, "page-border") ||
- !strncmp(attr->name, "number-up", 9) ||
- !strcmp(attr->name, "page-ranges") ||
- !strcmp(attr->name, "page-set") ||
- !strcasecmp(attr->name, "AP_FIRSTPAGE_InputSlot") ||
- !strcasecmp(attr->name, "AP_FIRSTPAGE_ManualFeed") ||
- !strcasecmp(attr->name, "com.apple.print.PrintSettings."
- "PMTotalSidesImaged..n.") ||
- !strcasecmp(attr->name, "com.apple.print.PrintSettings."
- "PMTotalBeginPages..n.")) &&
- banner_page)
- continue;
+static int /* O - Difference */
+compare_jobs(void *first, /* I - First job */
+ void *second, /* I - Second job */
+ void *data) /* I - App data (not used) */
+{
+ (void)data;
- /*
- * Otherwise add them to the list...
- */
+ return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id);
+}
- if (optptr > options)
- strlcat(optptr, " ", optlength - (optptr - options));
- if (attr->value_tag != IPP_TAG_BOOLEAN)
- {
- strlcat(optptr, attr->name, optlength - (optptr - options));
- strlcat(optptr, "=", optlength - (optptr - options));
- }
+/*
+ * 'dump_job_history()' - Dump any debug messages for a job.
+ */
- for (i = 0; i < attr->num_values; i ++)
- {
- if (i)
- strlcat(optptr, ",", optlength - (optptr - options));
+static void
+dump_job_history(cupsd_job_t *job) /* I - Job */
+{
+ int i, /* Looping var */
+ oldsize; /* Current MaxLogSize */
+ struct tm *date; /* Date/time value */
+ cupsd_joblog_t *message; /* Current message */
+ char temp[2048], /* Log message */
+ *ptr, /* Pointer into log message */
+ start[256], /* Start time */
+ end[256]; /* End time */
+ cupsd_printer_t *printer; /* Printer for job */
- optptr += strlen(optptr);
- switch (attr->value_tag)
- {
- case IPP_TAG_INTEGER :
- case IPP_TAG_ENUM :
- snprintf(optptr, optlength - (optptr - options),
- "%d", attr->values[i].integer);
- break;
+ /*
+ * See if we have anything to dump...
+ */
- case IPP_TAG_BOOLEAN :
- if (!attr->values[i].boolean)
- strlcat(optptr, "no", optlength - (optptr - options));
+ if (!job->history)
+ return;
- case IPP_TAG_NOVALUE :
- strlcat(optptr, attr->name,
- optlength - (optptr - options));
- break;
+ /*
+ * Disable log rotation temporarily...
+ */
- case IPP_TAG_RANGE :
- if (attr->values[i].range.lower == attr->values[i].range.upper)
- snprintf(optptr, optlength - (optptr - options) - 1,
- "%d", attr->values[i].range.lower);
- else
- snprintf(optptr, optlength - (optptr - options) - 1,
- "%d-%d", attr->values[i].range.lower,
- attr->values[i].range.upper);
- break;
+ oldsize = MaxLogSize;
+ MaxLogSize = 0;
- case IPP_TAG_RESOLUTION :
- snprintf(optptr, optlength - (optptr - options) - 1,
- "%dx%d%s", attr->values[i].resolution.xres,
- attr->values[i].resolution.yres,
- attr->values[i].resolution.units == IPP_RES_PER_INCH ?
- "dpi" : "dpc");
- break;
+ /*
+ * Copy the debug messages to the log...
+ */
- case IPP_TAG_STRING :
- case IPP_TAG_TEXT :
- case IPP_TAG_NAME :
- case IPP_TAG_KEYWORD :
- case IPP_TAG_CHARSET :
- case IPP_TAG_LANGUAGE :
- case IPP_TAG_URI :
- for (valptr = attr->values[i].string.text; *valptr;)
- {
- if (strchr(" \t\n\\\'\"", *valptr))
- *optptr++ = '\\';
- *optptr++ = *valptr++;
- }
+ message = (cupsd_joblog_t *)cupsArrayFirst(job->history);
+ date = localtime(&(message->time));
+ strftime(start, sizeof(start), "%X", date);
- *optptr = '\0';
- break;
+ message = (cupsd_joblog_t *)cupsArrayLast(job->history);
+ date = localtime(&(message->time));
+ strftime(end, sizeof(end), "%X", date);
- default :
- break; /* anti-compiler-warning-code */
- }
- }
+ snprintf(temp, sizeof(temp),
+ "[Job %d] The following messages were recorded from %s to %s",
+ job->id, start, end);
+ cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp);
- optptr += strlen(optptr);
+ for (message = (cupsd_joblog_t *)cupsArrayFirst(job->history);
+ message;
+ message = (cupsd_joblog_t *)cupsArrayNext(job->history))
+ cupsdWriteErrorLog(CUPSD_LOG_DEBUG, message->message);
+
+ snprintf(temp, sizeof(temp), "[Job %d] End of messages", job->id);
+ cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp);
+
+ /*
+ * Log the printer state values...
+ */
+
+ if ((printer = job->printer) == NULL)
+ printer = cupsdFindDest(job->dest);
+
+ if (printer)
+ {
+ snprintf(temp, sizeof(temp), "[Job %d] printer-state=%d(%s)", job->id,
+ printer->state,
+ printer->state == IPP_PRINTER_IDLE ? "idle" :
+ printer->state == IPP_PRINTER_PROCESSING ? "processing" :
+ "stopped");
+ cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp);
+
+ snprintf(temp, sizeof(temp), "[Job %d] printer-state-message=\"%s\"",
+ job->id, printer->state_message);
+ cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp);
+
+ snprintf(temp, sizeof(temp), "[Job %d] printer-state-reasons=", job->id);
+ ptr = temp + strlen(temp);
+ if (printer->num_reasons == 0)
+ strlcpy(ptr, "none", sizeof(temp) - (ptr - temp));
+ else
+ {
+ for (i = 0;
+ i < printer->num_reasons && ptr < (temp + sizeof(temp) - 2);
+ i ++)
+ {
+ if (i)
+ *ptr++ = ',';
+
+ strlcpy(ptr, printer->reasons[i], sizeof(temp) - (ptr - temp));
+ ptr += strlen(ptr);
+ }
}
+ cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp);
}
/*
- * Build the command-line arguments for the filters. Each filter
- * has 6 or 7 arguments:
- *
- * argv[0] = printer
- * argv[1] = job ID
- * argv[2] = username
- * argv[3] = title
- * argv[4] = # copies
- * argv[5] = options
- * argv[6] = filename (optional; normally stdin)
- *
- * This allows legacy printer drivers that use the old System V
- * printing interface to be used by CUPS.
- *
- * For remote jobs, we send all of the files in the argument list.
+ * Restore log file rotation...
*/
- if (printer->remote && job->num_files > 1)
- argv = calloc(7 + job->num_files, sizeof(char *));
- else
- argv = calloc(8, sizeof(char *));
+ MaxLogSize = oldsize;
- if (!argv)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR, "Unable to allocate argument array!");
- cupsArrayDelete(filters);
+ /*
+ * Free all messages...
+ */
+
+ free_job_history(job);
+}
+
+
+/*
+ * 'free_job_history()' - Free any log history.
+ */
+
+static void
+free_job_history(cupsd_job_t *job) /* I - Job */
+{
+ char *message; /* Current message */
- FilterLevel -= job->cost;
- cupsdStopPrinter(printer, 0);
+ if (!job->history)
return;
- }
- sprintf(jobid, "%d", job->id);
+ for (message = (char *)cupsArrayFirst(job->history);
+ message;
+ message = (char *)cupsArrayNext(job->history))
+ free(message);
- argv[0] = printer->name;
- argv[1] = jobid;
- argv[2] = job->username;
- argv[3] = title;
- argv[4] = copies;
- argv[5] = options;
+ cupsArrayDelete(job->history);
+ job->history = NULL;
+}
- if (printer->remote && job->num_files > 1)
- {
- for (i = 0; i < job->num_files; i ++)
- {
- snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
- job->id, i + 1);
- argv[6 + i] = strdup(filename);
+
+/*
+ * 'finalize_job()' - Cleanup after job filter processes and support data.
+ */
+
+static void
+finalize_job(cupsd_job_t *job, /* I - Job */
+ int set_job_state) /* I - 1 = set the job state */
+{
+ ipp_pstate_t printer_state; /* New printer state value */
+ ipp_jstate_t job_state; /* New job state value */
+ const char *message; /* Message for job state */
+ char buffer[1024]; /* Buffer for formatted messages */
+
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "finalize_job(job=%p(%d))", job, job->id);
+
+ /*
+ * Clear the "connecting-to-device" reason, which is only valid when a printer
+ * is processing, along with any remote printing job state...
+ */
+
+ cupsdSetPrinterReasons(job->printer, "-connecting-to-device,"
+ "cups-remote-pending,"
+ "cups-remote-pending-held,"
+ "cups-remote-processing,"
+ "cups-remote-stopped,"
+ "cups-remote-canceled,"
+ "cups-remote-aborted,"
+ "cups-remote-completed");
+
+ /*
+ * Similarly, clear the "offline-report" reason for non-USB devices since we
+ * rarely have current information for network devices...
+ */
+
+ if (strncmp(job->printer->device_uri, "usb:", 4) &&
+ strncmp(job->printer->device_uri, "ippusb:", 7))
+ cupsdSetPrinterReasons(job->printer, "-offline-report");
+
+ /*
+ * Free the security profile...
+ */
+
+ cupsdDestroyProfile(job->profile);
+ job->profile = NULL;
+
+ /*
+ * Clear the unresponsive job watchdog timers...
+ */
+
+ job->cancel_time = 0;
+ job->kill_time = 0;
+
+ /*
+ * Close pipes and status buffer...
+ */
+
+ cupsdClosePipe(job->print_pipes);
+ cupsdClosePipe(job->back_pipes);
+ cupsdClosePipe(job->side_pipes);
+
+ cupsdRemoveSelect(job->status_pipes[0]);
+ cupsdClosePipe(job->status_pipes);
+ cupsdStatBufDelete(job->status_buffer);
+ job->status_buffer = NULL;
+
+ /*
+ * Process the exit status...
+ */
+
+ if (job->printer->state == IPP_PRINTER_PROCESSING)
+ printer_state = IPP_PRINTER_IDLE;
+ else
+ printer_state = job->printer->state;
+
+ switch (job_state = job->state_value)
+ {
+ case IPP_JOB_PENDING :
+ message = "Job paused.";
+ break;
+
+ case IPP_JOB_HELD :
+ message = "Job held.";
+ break;
+
+ default :
+ case IPP_JOB_PROCESSING :
+ case IPP_JOB_COMPLETED :
+ job_state = IPP_JOB_COMPLETED;
+ message = "Job completed.";
+
+ if (!job->status)
+ ippSetString(job->attrs, &job->reasons, 0,
+ "job-completed-successfully");
+ break;
+
+ case IPP_JOB_STOPPED :
+ message = "Job stopped.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "job-stopped");
+ break;
+
+ case IPP_JOB_CANCELED :
+ message = "Job canceled.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "job-canceled-by-user");
+ break;
+
+ case IPP_JOB_ABORTED :
+ message = "Job aborted.";
+ break;
+ }
+
+ if (job->status < 0)
+ {
+ /*
+ * Backend had errors...
+ */
+
+ int exit_code; /* Exit code from backend */
+
+ /*
+ * Convert the status to an exit code. Due to the way the W* macros are
+ * implemented on MacOS X (bug?), we have to store the exit status in a
+ * variable first and then convert...
+ */
+
+ exit_code = -job->status;
+ if (WIFEXITED(exit_code))
+ exit_code = WEXITSTATUS(exit_code);
+ else
+ {
+ ippSetString(job->attrs, &job->reasons, 0, "cups-backend-crashed");
+ exit_code = job->status;
+ }
+
+ cupsdLogJob(job, CUPSD_LOG_INFO, "Backend returned status %d (%s)",
+ exit_code,
+ exit_code == CUPS_BACKEND_FAILED ? "failed" :
+ exit_code == CUPS_BACKEND_AUTH_REQUIRED ?
+ "authentication required" :
+ exit_code == CUPS_BACKEND_HOLD ? "hold job" :
+ exit_code == CUPS_BACKEND_STOP ? "stop printer" :
+ exit_code == CUPS_BACKEND_CANCEL ? "cancel job" :
+ exit_code == CUPS_BACKEND_RETRY ? "retry job later" :
+ exit_code == CUPS_BACKEND_RETRY_CURRENT ? "retry job immediately" :
+ exit_code < 0 ? "crashed" : "unknown");
+
+ /*
+ * Do what needs to be done...
+ */
+
+ switch (exit_code)
+ {
+ default :
+ case CUPS_BACKEND_FAILED :
+ /*
+ * Backend failure, use the error-policy to determine how to
+ * act...
+ */
+
+ if (job->dtype & CUPS_PRINTER_CLASS)
+ {
+ /*
+ * Queued on a class - mark the job as pending and we'll retry on
+ * another printer...
+ */
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_PENDING;
+ message = "Retrying job on another printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
+ }
+ }
+ else if (!strcmp(job->printer->error_policy, "retry-current-job"))
+ {
+ /*
+ * The error policy is "retry-current-job" - mark the job as pending
+ * and we'll retry on the same printer...
+ */
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_PENDING;
+ message = "Retrying job on same printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "none");
+ }
+ }
+ else if ((job->printer->type & CUPS_PRINTER_FAX) ||
+ !strcmp(job->printer->error_policy, "retry-job"))
+ {
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ /*
+ * The job was queued on a fax or the error policy is "retry-job" -
+ * hold the job if the number of retries is less than the
+ * JobRetryLimit, otherwise abort the job.
+ */
+
+ job->tries ++;
+
+ if (job->tries > JobRetryLimit && JobRetryLimit > 0)
+ {
+ /*
+ * Too many tries...
+ */
+
+ snprintf(buffer, sizeof(buffer),
+ "Job aborted after %d unsuccessful attempts.",
+ JobRetryLimit);
+ job_state = IPP_JOB_ABORTED;
+ message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
+ }
+ else
+ {
+ /*
+ * Try again in N seconds...
+ */
+
+ snprintf(buffer, sizeof(buffer),
+ "Job held for %d seconds since it could not be sent.",
+ JobRetryInterval);
+
+ job->hold_until = time(NULL) + JobRetryInterval;
+ job_state = IPP_JOB_HELD;
+ message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
+ }
+ }
+ }
+ else if (!strcmp(job->printer->error_policy, "abort-job") &&
+ job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_ABORTED;
+ message = "Job aborted due to backend errors; please consult "
+ "the error_log file for details.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
+ }
+ else if (job->state_value == IPP_JOB_PROCESSING)
+ {
+ job_state = IPP_JOB_PENDING;
+ printer_state = IPP_PRINTER_STOPPED;
+ message = "Printer stopped due to backend errors; please "
+ "consult the error_log file for details.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "none");
+ }
+ break;
+
+ case CUPS_BACKEND_CANCEL :
+ /*
+ * Cancel the job...
+ */
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_CANCELED;
+ message = "Job canceled at printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "canceled-at-device");
+ }
+ break;
+
+ case CUPS_BACKEND_HOLD :
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ /*
+ * Hold the job...
+ */
+
+ const char *reason = ippGetString(job->reasons, 0, NULL);
+
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-state-reasons=\"%s\"",
+ reason);
+
+ if (!reason || strncmp(reason, "account-", 8))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 1);
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "job-hold-until-specified");
+ message = "Job held indefinitely due to backend errors; please "
+ "consult the error_log file for details.";
+ }
+ else if (!strcmp(reason, "account-info-needed"))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account information is "
+ "required.";
+ }
+ else if (!strcmp(reason, "account-closed"))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account has been closed.";
+ }
+ else if (!strcmp(reason, "account-limit-reached"))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account limit has been "
+ "reached.";
+ }
+ else
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account authorization failed.";
+ }
+
+ job_state = IPP_JOB_HELD;
+ }
+ break;
+
+ case CUPS_BACKEND_STOP :
+ /*
+ * Stop the printer...
+ */
+
+ printer_state = IPP_PRINTER_STOPPED;
+ message = "Printer stopped due to backend errors; please "
+ "consult the error_log file for details.";
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_PENDING;
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
+ }
+ break;
+
+ case CUPS_BACKEND_AUTH_REQUIRED :
+ /*
+ * Hold the job for authentication...
+ */
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ cupsdSetJobHoldUntil(job, "auth-info-required", 1);
+
+ job_state = IPP_JOB_HELD;
+ message = "Job held for authentication.";
+
+ if (strncmp(job->reasons->values[0].string.text, "account-", 8))
+ ippSetString(job->attrs, &job->reasons, 0,
+ "cups-held-for-authentication");
+ }
+ break;
+
+ case CUPS_BACKEND_RETRY :
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ /*
+ * Hold the job if the number of retries is less than the
+ * JobRetryLimit, otherwise abort the job.
+ */
+
+ job->tries ++;
+
+ if (job->tries > JobRetryLimit && JobRetryLimit > 0)
+ {
+ /*
+ * Too many tries...
+ */
+
+ snprintf(buffer, sizeof(buffer),
+ "Job aborted after %d unsuccessful attempts.",
+ JobRetryLimit);
+ job_state = IPP_JOB_ABORTED;
+ message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
+ }
+ else
+ {
+ /*
+ * Try again in N seconds...
+ */
+
+ snprintf(buffer, sizeof(buffer),
+ "Job held for %d seconds since it could not be sent.",
+ JobRetryInterval);
+
+ job->hold_until = time(NULL) + JobRetryInterval;
+ job_state = IPP_JOB_HELD;
+ message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
+ }
+ }
+ break;
+
+ case CUPS_BACKEND_RETRY_CURRENT :
+ /*
+ * Mark the job as pending and retry on the same printer...
+ */
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_PENDING;
+ message = "Retrying job on same printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "none");
+ }
+ break;
+ }
+ }
+ else if (job->status > 0)
+ {
+ /*
+ * Filter had errors; stop job...
+ */
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_STOPPED;
+ message = "Job stopped due to filter errors; please consult the "
+ "error_log file for details.";
+
+ if (WIFSIGNALED(job->status))
+ ippSetString(job->attrs, &job->reasons, 0, "cups-filter-crashed");
+ else
+ ippSetString(job->attrs, &job->reasons, 0, "job-completed-with-errors");
+ }
+ }
+
+ /*
+ * Update the printer and job state.
+ */
+
+ if (set_job_state && job_state != job->state_value)
+ cupsdSetJobState(job, job_state, CUPSD_JOB_DEFAULT, "%s", message);
+
+ cupsdSetPrinterState(job->printer, printer_state,
+ printer_state == IPP_PRINTER_STOPPED);
+ update_job_attrs(job, 0);
+
+ if (job->history)
+ {
+ if (job->status &&
+ (job->state_value == IPP_JOB_ABORTED ||
+ job->state_value == IPP_JOB_STOPPED))
+ dump_job_history(job);
+ else
+ free_job_history(job);
+ }
+
+ cupsArrayRemove(PrintingJobs, job);
+
+ /*
+ * Apply any PPD updates...
+ */
+
+ if (job->num_keywords)
+ {
+ if (cupsdUpdatePrinterPPD(job->printer, job->num_keywords, job->keywords))
+ cupsdSetPrinterAttrs(job->printer);
+
+ cupsFreeOptions(job->num_keywords, job->keywords);
+
+ job->num_keywords = 0;
+ job->keywords = NULL;
+ }
+
+ /*
+ * Clear the printer <-> job association...
+ */
+
+ job->printer->job = NULL;
+ job->printer = NULL;
+
+ /*
+ * Try printing another job...
+ */
+
+ if (printer_state != IPP_PRINTER_STOPPED)
+ cupsdCheckJobs();
+}
+
+
+/*
+ * 'get_options()' - Get a string containing the job options.
+ */
+
+static char * /* O - Options string */
+get_options(cupsd_job_t *job, /* I - Job */
+ int banner_page, /* I - Printing a banner page? */
+ char *copies, /* I - Copies buffer */
+ size_t copies_size, /* I - Size of copies buffer */
+ char *title, /* I - Title buffer */
+ size_t title_size) /* I - Size of title buffer */
+{
+ int i; /* Looping var */
+ size_t newlength; /* New option buffer length */
+ char *optptr, /* Pointer to options */
+ *valptr; /* Pointer in value string */
+ ipp_attribute_t *attr; /* Current attribute */
+ _ppd_cache_t *pc; /* PPD cache and mapping data */
+ int num_pwgppds; /* Number of PWG->PPD options */
+ cups_option_t *pwgppds, /* PWG->PPD options */
+ *pwgppd, /* Current PWG->PPD option */
+ *preset; /* Current preset option */
+ int print_color_mode,
+ /* Output mode (if any) */
+ print_quality; /* Print quality (if any) */
+ const char *ppd; /* PPD option choice */
+ int exact; /* Did we get an exact match? */
+ static char *options = NULL;/* Full list of options */
+ static size_t optlength = 0; /* Length of option buffer */
+
+
+ /*
+ * Building the options string is harder than it needs to be, but for the
+ * moment we need to pass strings for command-line args and not IPP attribute
+ * pointers... :)
+ *
+ * First build an options array for any PWG->PPD mapped option/choice pairs.
+ */
+
+ pc = job->printer->pc;
+ num_pwgppds = 0;
+ pwgppds = NULL;
+
+ if (pc &&
+ !ippFindAttribute(job->attrs,
+ "com.apple.print.DocumentTicket.PMSpoolFormat",
+ IPP_TAG_ZERO) &&
+ !ippFindAttribute(job->attrs, "APPrinterPreset", IPP_TAG_ZERO) &&
+ (ippFindAttribute(job->attrs, "print-color-mode", IPP_TAG_ZERO) ||
+ ippFindAttribute(job->attrs, "print-quality", IPP_TAG_ZERO)))
+ {
+ /*
+ * Map print-color-mode and print-quality to a preset...
+ */
+
+ if ((attr = ippFindAttribute(job->attrs, "print-color-mode",
+ IPP_TAG_KEYWORD)) != NULL &&
+ !strcmp(attr->values[0].string.text, "monochrome"))
+ print_color_mode = _PWG_PRINT_COLOR_MODE_MONOCHROME;
+ else
+ print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR;
+
+ if ((attr = ippFindAttribute(job->attrs, "print-quality",
+ IPP_TAG_ENUM)) != NULL &&
+ attr->values[0].integer >= IPP_QUALITY_DRAFT &&
+ attr->values[0].integer <= IPP_QUALITY_HIGH)
+ print_quality = attr->values[0].integer - IPP_QUALITY_DRAFT;
+ else
+ print_quality = _PWG_PRINT_QUALITY_NORMAL;
+
+ if (pc->num_presets[print_color_mode][print_quality] == 0)
+ {
+ /*
+ * Try to find a preset that works so that we maximize the chances of us
+ * getting a good print using IPP attributes.
+ */
+
+ if (pc->num_presets[print_color_mode][_PWG_PRINT_QUALITY_NORMAL] > 0)
+ print_quality = _PWG_PRINT_QUALITY_NORMAL;
+ else if (pc->num_presets[_PWG_PRINT_COLOR_MODE_COLOR][print_quality] > 0)
+ print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR;
+ else
+ {
+ print_quality = _PWG_PRINT_QUALITY_NORMAL;
+ print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR;
+ }
+ }
+
+ if (pc->num_presets[print_color_mode][print_quality] > 0)
+ {
+ /*
+ * Copy the preset options as long as the corresponding names are not
+ * already defined in the IPP request...
+ */
+
+ for (i = pc->num_presets[print_color_mode][print_quality],
+ preset = pc->presets[print_color_mode][print_quality];
+ i > 0;
+ i --, preset ++)
+ {
+ if (!ippFindAttribute(job->attrs, preset->name, IPP_TAG_ZERO))
+ num_pwgppds = cupsAddOption(preset->name, preset->value, num_pwgppds,
+ &pwgppds);
+ }
+ }
+ }
+
+ if (pc)
+ {
+ if (!ippFindAttribute(job->attrs, "InputSlot", IPP_TAG_ZERO) &&
+ !ippFindAttribute(job->attrs, "HPPaperSource", IPP_TAG_ZERO))
+ {
+ if ((ppd = _ppdCacheGetInputSlot(pc, job->attrs, NULL)) != NULL)
+ num_pwgppds = cupsAddOption(pc->source_option, ppd, num_pwgppds,
+ &pwgppds);
+ }
+ if (!ippFindAttribute(job->attrs, "MediaType", IPP_TAG_ZERO) &&
+ (ppd = _ppdCacheGetMediaType(pc, job->attrs, NULL)) != NULL)
+ num_pwgppds = cupsAddOption("MediaType", ppd, num_pwgppds, &pwgppds);
+
+ if (!ippFindAttribute(job->attrs, "PageRegion", IPP_TAG_ZERO) &&
+ !ippFindAttribute(job->attrs, "PageSize", IPP_TAG_ZERO) &&
+ (ppd = _ppdCacheGetPageSize(pc, job->attrs, NULL, &exact)) != NULL)
+ {
+ num_pwgppds = cupsAddOption("PageSize", ppd, num_pwgppds, &pwgppds);
+
+ if (!ippFindAttribute(job->attrs, "media", IPP_TAG_ZERO))
+ num_pwgppds = cupsAddOption("media", ppd, num_pwgppds, &pwgppds);
+ }
+
+ if (!ippFindAttribute(job->attrs, "OutputBin", IPP_TAG_ZERO) &&
+ (attr = ippFindAttribute(job->attrs, "output-bin",
+ IPP_TAG_ZERO)) != NULL &&
+ (attr->value_tag == IPP_TAG_KEYWORD ||
+ attr->value_tag == IPP_TAG_NAME) &&
+ (ppd = _ppdCacheGetOutputBin(pc, attr->values[0].string.text)) != NULL)
+ {
+ /*
+ * Map output-bin to OutputBin option...
+ */
+
+ num_pwgppds = cupsAddOption("OutputBin", ppd, num_pwgppds, &pwgppds);
+ }
+
+ if (pc->sides_option &&
+ !ippFindAttribute(job->attrs, pc->sides_option, IPP_TAG_ZERO) &&
+ (attr = ippFindAttribute(job->attrs, "sides", IPP_TAG_KEYWORD)) != NULL)
+ {
+ /*
+ * Map sides to duplex option...
+ */
+
+ if (!strcmp(attr->values[0].string.text, "one-sided"))
+ num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_1sided,
+ num_pwgppds, &pwgppds);
+ else if (!strcmp(attr->values[0].string.text, "two-sided-long-edge"))
+ num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_2sided_long,
+ num_pwgppds, &pwgppds);
+ else if (!strcmp(attr->values[0].string.text, "two-sided-short-edge"))
+ num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_2sided_short,
+ num_pwgppds, &pwgppds);
+ }
+
+ /*
+ * Map finishings values...
+ */
+
+ num_pwgppds = _ppdCacheGetFinishingOptions(pc, job->attrs,
+ IPP_FINISHINGS_NONE, num_pwgppds,
+ &pwgppds);
+ }
+
+ /*
+ * Figure out how much room we need...
+ */
+
+ newlength = ipp_length(job->attrs);
+
+ for (i = num_pwgppds, pwgppd = pwgppds; i > 0; i --, pwgppd ++)
+ newlength += 1 + strlen(pwgppd->name) + 1 + strlen(pwgppd->value);
+
+ /*
+ * Then allocate/reallocate the option buffer as needed...
+ */
+
+ if (newlength == 0) /* This can never happen, but Clang */
+ newlength = 1; /* thinks it can... */
+
+ if (newlength > optlength || !options)
+ {
+ if (!options)
+ optptr = malloc(newlength);
+ else
+ optptr = realloc(options, newlength);
+
+ if (!optptr)
+ {
+ cupsdLogJob(job, CUPSD_LOG_CRIT,
+ "Unable to allocate " CUPS_LLFMT " bytes for option buffer.",
+ CUPS_LLCAST newlength);
+ return (NULL);
+ }
+
+ options = optptr;
+ optlength = newlength;
+ }
+
+ /*
+ * Now loop through the attributes and convert them to the textual
+ * representation used by the filters...
+ */
+
+ optptr = options;
+ *optptr = '\0';
+
+ snprintf(title, title_size, "%s-%d", job->printer->name, job->id);
+ strlcpy(copies, "1", copies_size);
+
+ for (attr = job->attrs->attrs; attr != NULL; attr = attr->next)
+ {
+ if (!strcmp(attr->name, "copies") &&
+ attr->value_tag == IPP_TAG_INTEGER)
+ {
+ /*
+ * Don't use the # copies attribute if we are printing the job sheets...
+ */
+
+ if (!banner_page)
+ snprintf(copies, copies_size, "%d", attr->values[0].integer);
+ }
+ else if (!strcmp(attr->name, "job-name") &&
+ (attr->value_tag == IPP_TAG_NAME ||
+ attr->value_tag == IPP_TAG_NAMELANG))
+ strlcpy(title, attr->values[0].string.text, title_size);
+ else if (attr->group_tag == IPP_TAG_JOB)
+ {
+ /*
+ * Filter out other unwanted attributes...
+ */
+
+ if (attr->value_tag == IPP_TAG_NOVALUE ||
+ attr->value_tag == IPP_TAG_MIMETYPE ||
+ attr->value_tag == IPP_TAG_NAMELANG ||
+ attr->value_tag == IPP_TAG_TEXTLANG ||
+ (attr->value_tag == IPP_TAG_URI && strcmp(attr->name, "job-uuid") &&
+ strcmp(attr->name, "job-authorization-uri")) ||
+ attr->value_tag == IPP_TAG_URISCHEME ||
+ attr->value_tag == IPP_TAG_BEGIN_COLLECTION) /* Not yet supported */
+ continue;
+
+ if (!strcmp(attr->name, "job-hold-until") ||
+ !strcmp(attr->name, "job-id") ||
+ !strcmp(attr->name, "job-k-octets") ||
+ !strcmp(attr->name, "job-media-sheets") ||
+ !strcmp(attr->name, "job-media-sheets-completed") ||
+ !strcmp(attr->name, "job-state") ||
+ !strcmp(attr->name, "job-state-reasons"))
+ continue;
+
+ if (!strncmp(attr->name, "job-", 4) &&
+ strcmp(attr->name, "job-account-id") &&
+ strcmp(attr->name, "job-accounting-user-id") &&
+ strcmp(attr->name, "job-authorization-uri") &&
+ strcmp(attr->name, "job-billing") &&
+ strcmp(attr->name, "job-impressions") &&
+ strcmp(attr->name, "job-originating-host-name") &&
+ strcmp(attr->name, "job-password") &&
+ strcmp(attr->name, "job-password-encryption") &&
+ strcmp(attr->name, "job-uuid") &&
+ !(job->printer->type & CUPS_PRINTER_REMOTE))
+ continue;
+
+ if ((!strcmp(attr->name, "job-impressions") ||
+ !strcmp(attr->name, "page-label") ||
+ !strcmp(attr->name, "page-border") ||
+ !strncmp(attr->name, "number-up", 9) ||
+ !strcmp(attr->name, "page-ranges") ||
+ !strcmp(attr->name, "page-set") ||
+ !_cups_strcasecmp(attr->name, "AP_FIRSTPAGE_InputSlot") ||
+ !_cups_strcasecmp(attr->name, "AP_FIRSTPAGE_ManualFeed") ||
+ !_cups_strcasecmp(attr->name, "com.apple.print.PrintSettings."
+ "PMTotalSidesImaged..n.") ||
+ !_cups_strcasecmp(attr->name, "com.apple.print.PrintSettings."
+ "PMTotalBeginPages..n.")) &&
+ banner_page)
+ continue;
+
+ /*
+ * Otherwise add them to the list...
+ */
+
+ if (optptr > options)
+ strlcat(optptr, " ", optlength - (optptr - options));
+
+ if (attr->value_tag != IPP_TAG_BOOLEAN)
+ {
+ strlcat(optptr, attr->name, optlength - (optptr - options));
+ strlcat(optptr, "=", optlength - (optptr - options));
+ }
+
+ for (i = 0; i < attr->num_values; i ++)
+ {
+ if (i)
+ strlcat(optptr, ",", optlength - (optptr - options));
+
+ optptr += strlen(optptr);
+
+ switch (attr->value_tag)
+ {
+ case IPP_TAG_INTEGER :
+ case IPP_TAG_ENUM :
+ snprintf(optptr, optlength - (optptr - options),
+ "%d", attr->values[i].integer);
+ break;
+
+ case IPP_TAG_BOOLEAN :
+ if (!attr->values[i].boolean)
+ strlcat(optptr, "no", optlength - (optptr - options));
+
+ strlcat(optptr, attr->name,
+ optlength - (optptr - options));
+ break;
+
+ case IPP_TAG_RANGE :
+ if (attr->values[i].range.lower == attr->values[i].range.upper)
+ snprintf(optptr, optlength - (optptr - options) - 1,
+ "%d", attr->values[i].range.lower);
+ else
+ snprintf(optptr, optlength - (optptr - options) - 1,
+ "%d-%d", attr->values[i].range.lower,
+ attr->values[i].range.upper);
+ break;
+
+ case IPP_TAG_RESOLUTION :
+ snprintf(optptr, optlength - (optptr - options) - 1,
+ "%dx%d%s", attr->values[i].resolution.xres,
+ attr->values[i].resolution.yres,
+ attr->values[i].resolution.units == IPP_RES_PER_INCH ?
+ "dpi" : "dpcm");
+ break;
+
+ case IPP_TAG_STRING :
+ case IPP_TAG_TEXT :
+ case IPP_TAG_NAME :
+ case IPP_TAG_KEYWORD :
+ case IPP_TAG_CHARSET :
+ case IPP_TAG_LANGUAGE :
+ case IPP_TAG_URI :
+ for (valptr = attr->values[i].string.text; *valptr;)
+ {
+ if (strchr(" \t\n\\\'\"", *valptr))
+ *optptr++ = '\\';
+ *optptr++ = *valptr++;
+ }
+
+ *optptr = '\0';
+ break;
+
+ default :
+ break; /* anti-compiler-warning-code */
+ }
+ }
+
+ optptr += strlen(optptr);
+ }
+ }
+
+ /*
+ * Finally loop through the PWG->PPD mapped options and add them...
+ */
+
+ for (i = num_pwgppds, pwgppd = pwgppds; i > 0; i --, pwgppd ++)
+ {
+ *optptr++ = ' ';
+ strlcpy(optptr, pwgppd->name, optlength - (optptr - options));
+ optptr += strlen(optptr);
+ *optptr++ = '=';
+ strlcpy(optptr, pwgppd->value, optlength - (optptr - options));
+ optptr += strlen(optptr);
+ }
+
+ cupsFreeOptions(num_pwgppds, pwgppds);
+
+ /*
+ * Return the options string...
+ */
+
+ return (options);
+}
+
+
+/*
+ * 'ipp_length()' - Compute the size of the buffer needed to hold
+ * the textual IPP attributes.
+ */
+
+static size_t /* O - Size of attribute buffer */
+ipp_length(ipp_t *ipp) /* I - IPP request */
+{
+ size_t bytes; /* Number of bytes */
+ int i; /* Looping var */
+ ipp_attribute_t *attr; /* Current attribute */
+
+
+ /*
+ * Loop through all attributes...
+ */
+
+ bytes = 0;
+
+ for (attr = ipp->attrs; attr != NULL; attr = attr->next)
+ {
+ /*
+ * Skip attributes that won't be sent to filters...
+ */
+
+ if (attr->value_tag == IPP_TAG_NOVALUE ||
+ attr->value_tag == IPP_TAG_MIMETYPE ||
+ attr->value_tag == IPP_TAG_NAMELANG ||
+ attr->value_tag == IPP_TAG_TEXTLANG ||
+ attr->value_tag == IPP_TAG_URI ||
+ attr->value_tag == IPP_TAG_URISCHEME)
+ continue;
+
+ /*
+ * Add space for a leading space and commas between each value.
+ * For the first attribute, the leading space isn't used, so the
+ * extra byte can be used as the nul terminator...
+ */
+
+ bytes ++; /* " " separator */
+ bytes += attr->num_values; /* "," separators */
+
+ /*
+ * Boolean attributes appear as "foo,nofoo,foo,nofoo", while
+ * other attributes appear as "foo=value1,value2,...,valueN".
+ */
+
+ if (attr->value_tag != IPP_TAG_BOOLEAN)
+ bytes += strlen(attr->name);
+ else
+ bytes += attr->num_values * strlen(attr->name);
+
+ /*
+ * Now add the size required for each value in the attribute...
+ */
+
+ switch (attr->value_tag)
+ {
+ case IPP_TAG_INTEGER :
+ case IPP_TAG_ENUM :
+ /*
+ * Minimum value of a signed integer is -2147483647, or 11 digits.
+ */
+
+ bytes += attr->num_values * 11;
+ break;
+
+ case IPP_TAG_BOOLEAN :
+ /*
+ * Add two bytes for each false ("no") value...
+ */
+
+ for (i = 0; i < attr->num_values; i ++)
+ if (!attr->values[i].boolean)
+ bytes += 2;
+ break;
+
+ case IPP_TAG_RANGE :
+ /*
+ * A range is two signed integers separated by a hyphen, or
+ * 23 characters max.
+ */
+
+ bytes += attr->num_values * 23;
+ break;
+
+ case IPP_TAG_RESOLUTION :
+ /*
+ * A resolution is two signed integers separated by an "x" and
+ * suffixed by the units, or 26 characters max.
+ */
+
+ bytes += attr->num_values * 26;
+ break;
+
+ case IPP_TAG_STRING :
+ case IPP_TAG_TEXT :
+ case IPP_TAG_NAME :
+ case IPP_TAG_KEYWORD :
+ case IPP_TAG_CHARSET :
+ case IPP_TAG_LANGUAGE :
+ case IPP_TAG_URI :
+ /*
+ * Strings can contain characters that need quoting. We need
+ * at least 2 * len + 2 characters to cover the quotes and
+ * any backslashes in the string.
+ */
+
+ for (i = 0; i < attr->num_values; i ++)
+ bytes += 2 * strlen(attr->values[i].string.text) + 2;
+ break;
+
+ default :
+ break; /* anti-compiler-warning-code */
+ }
+ }
+
+ return (bytes);
+}
+
+
+/*
+ * 'load_job_cache()' - Load jobs from the job.cache file.
+ */
+
+static void
+load_job_cache(const char *filename) /* I - job.cache filename */
+{
+ cups_file_t *fp; /* job.cache file */
+ char line[1024], /* Line buffer */
+ *value; /* Value on line */
+ int linenum; /* Line number in file */
+ cupsd_job_t *job; /* Current job */
+ int jobid; /* Job ID */
+ char jobfile[1024]; /* Job filename */
+
+
+ /*
+ * Open the job.cache file...
+ */
+
+ if ((fp = cupsdOpenConfFile(filename)) == NULL)
+ {
+ load_request_root();
+ return;
+ }
+
+ /*
+ * Read entries from the job cache file and create jobs as needed.
+ */
+
+ cupsdLogMessage(CUPSD_LOG_INFO, "Loading job cache file \"%s\"...",
+ filename);
+
+ linenum = 0;
+ job = NULL;
+
+ while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
+ {
+ if (!_cups_strcasecmp(line, "NextJobId"))
+ {
+ if (value)
+ NextJobId = atoi(value);
+ }
+ else if (!_cups_strcasecmp(line, "<Job"))
+ {
+ if (job)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Missing </Job> directive on line %d.",
+ linenum);
+ continue;
+ }
+
+ if (!value)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Missing job ID on line %d.", linenum);
+ continue;
+ }
+
+ jobid = atoi(value);
+
+ if (jobid < 1)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad job ID %d on line %d.", jobid,
+ linenum);
+ continue;
+ }
+
+ snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, jobid);
+ if (access(jobfile, 0))
+ {
+ snprintf(jobfile, sizeof(jobfile), "%s/c%05d.N", RequestRoot, jobid);
+ if (access(jobfile, 0))
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "[Job %d] Files have gone away.",
+ jobid);
+ continue;
+ }
+ }
+
+ job = calloc(1, sizeof(cupsd_job_t));
+ if (!job)
+ {
+ cupsdLogMessage(CUPSD_LOG_EMERG,
+ "[Job %d] Unable to allocate memory for job.", jobid);
+ break;
+ }
+
+ job->id = jobid;
+ job->back_pipes[0] = -1;
+ job->back_pipes[1] = -1;
+ job->print_pipes[0] = -1;
+ job->print_pipes[1] = -1;
+ job->side_pipes[0] = -1;
+ job->side_pipes[1] = -1;
+ job->status_pipes[0] = -1;
+ job->status_pipes[1] = -1;
+
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Loading from cache...");
+ }
+ else if (!job)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Missing <Job #> directive on line %d.", linenum);
+ continue;
+ }
+ else if (!_cups_strcasecmp(line, "</Job>"))
+ {
+ cupsArrayAdd(Jobs, job);
+
+ if (job->state_value <= IPP_JOB_STOPPED && cupsdLoadJob(job))
+ cupsArrayAdd(ActiveJobs, job);
+
+ job = NULL;
+ }
+ else if (!value)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Missing value on line %d.", linenum);
+ continue;
+ }
+ else if (!_cups_strcasecmp(line, "State"))
+ {
+ job->state_value = (ipp_jstate_t)atoi(value);
+
+ if (job->state_value < IPP_JOB_PENDING)
+ job->state_value = IPP_JOB_PENDING;
+ else if (job->state_value > IPP_JOB_COMPLETED)
+ job->state_value = IPP_JOB_COMPLETED;
+ }
+ else if (!_cups_strcasecmp(line, "HoldUntil"))
+ {
+ job->hold_until = atoi(value);
+ }
+ else if (!_cups_strcasecmp(line, "Priority"))
+ {
+ job->priority = atoi(value);
+ }
+ else if (!_cups_strcasecmp(line, "Username"))
+ {
+ cupsdSetString(&job->username, value);
+ }
+ else if (!_cups_strcasecmp(line, "Destination"))
+ {
+ cupsdSetString(&job->dest, value);
+ }
+ else if (!_cups_strcasecmp(line, "DestType"))
+ {
+ job->dtype = (cups_ptype_t)atoi(value);
+ }
+ else if (!_cups_strcasecmp(line, "NumFiles"))
+ {
+ job->num_files = atoi(value);
+
+ if (job->num_files < 0)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad NumFiles value %d on line %d.",
+ job->num_files, linenum);
+ job->num_files = 0;
+ continue;
+ }
+
+ if (job->num_files > 0)
+ {
+ snprintf(jobfile, sizeof(jobfile), "%s/d%05d-001", RequestRoot,
+ job->id);
+ if (access(jobfile, 0))
+ {
+ cupsdLogJob(job, CUPSD_LOG_INFO, "Data files have gone away.");
+ job->num_files = 0;
+ continue;
+ }
+
+ job->filetypes = calloc(job->num_files, sizeof(mime_type_t *));
+ job->compressions = calloc(job->num_files, sizeof(int));
+
+ if (!job->filetypes || !job->compressions)
+ {
+ cupsdLogJob(job, CUPSD_LOG_EMERG,
+ "Unable to allocate memory for %d files.",
+ job->num_files);
+ break;
+ }
+ }
+ }
+ else if (!_cups_strcasecmp(line, "File"))
+ {
+ int number, /* File number */
+ compression; /* Compression value */
+ char super[MIME_MAX_SUPER], /* MIME super type */
+ type[MIME_MAX_TYPE]; /* MIME type */
+
+
+ if (sscanf(value, "%d%*[ \t]%15[^/]/%255s%d", &number, super, type,
+ &compression) != 4)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File on line %d.", linenum);
+ continue;
+ }
+
+ if (number < 1 || number > job->num_files)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File number %d on line %d.",
+ number, linenum);
+ continue;
+ }
+
+ number --;
+
+ job->compressions[number] = compression;
+ job->filetypes[number] = mimeType(MimeDatabase, super, type);
+
+ if (!job->filetypes[number])
+ {
+ /*
+ * If the original MIME type is unknown, auto-type it!
+ */
+
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unknown MIME type %s/%s for file %d.",
+ super, type, number + 1);
+
+ snprintf(jobfile, sizeof(jobfile), "%s/d%05d-%03d", RequestRoot,
+ job->id, number + 1);
+ job->filetypes[number] = mimeFileType(MimeDatabase, jobfile, NULL,
+ job->compressions + number);
+
+ /*
+ * If that didn't work, assume it is raw...
+ */
+
+ if (!job->filetypes[number])
+ job->filetypes[number] = mimeType(MimeDatabase, "application",
+ "vnd.cups-raw");
+ }
}
+ else
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Unknown %s directive on line %d.",
+ line, linenum);
}
- else
+
+ if (job)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Missing </Job> directive on line %d.", linenum);
+ cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+ }
+
+ cupsFileClose(fp);
+}
+
+
+/*
+ * 'load_next_job_id()' - Load the NextJobId value from the job.cache file.
+ */
+
+static void
+load_next_job_id(const char *filename) /* I - job.cache filename */
+{
+ cups_file_t *fp; /* job.cache file */
+ char line[1024], /* Line buffer */
+ *value; /* Value on line */
+ int linenum; /* Line number in file */
+ int next_job_id; /* NextJobId value from line */
+
+
+ /*
+ * Read the NextJobId directive from the job.cache file and use
+ * the value (if any).
+ */
+
+ if ((fp = cupsFileOpen(filename, "r")) == NULL)
+ {
+ if (errno != ENOENT)
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Unable to open job cache file \"%s\": %s",
+ filename, strerror(errno));
+
+ return;
+ }
+
+ cupsdLogMessage(CUPSD_LOG_INFO,
+ "Loading NextJobId from job cache file \"%s\"...", filename);
+
+ linenum = 0;
+
+ while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
+ {
+ if (!_cups_strcasecmp(line, "NextJobId"))
+ {
+ if (value)
+ {
+ next_job_id = atoi(value);
+
+ if (next_job_id > NextJobId)
+ NextJobId = next_job_id;
+ }
+ break;
+ }
+ }
+
+ cupsFileClose(fp);
+}
+
+
+/*
+ * 'load_request_root()' - Load jobs from the RequestRoot directory.
+ */
+
+static void
+load_request_root(void)
+{
+ cups_dir_t *dir; /* Directory */
+ cups_dentry_t *dent; /* Directory entry */
+ cupsd_job_t *job; /* New job */
+
+
+ /*
+ * Open the requests directory...
+ */
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG, "Scanning %s for jobs...", RequestRoot);
+
+ if ((dir = cupsDirOpen(RequestRoot)) == NULL)
{
- snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
- job->id, job->current_file + 1);
- argv[6] = filename;
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Unable to open spool directory \"%s\": %s",
+ RequestRoot, strerror(errno));
+ return;
}
- for (i = 0; argv[i]; i ++)
- cupsdLogMessage(CUPSD_LOG_DEBUG,
- "[Job %d] argv[%d]=\"%s\"", job->id, i, argv[i]);
-
/*
- * Create environment variable strings for the filters...
+ * Read all the c##### files...
*/
- attr = ippFindAttribute(job->attrs, "attributes-natural-language",
- IPP_TAG_LANGUAGE);
+ while ((dent = cupsDirRead(dir)) != NULL)
+ if (strlen(dent->filename) >= 6 && dent->filename[0] == 'c')
+ {
+ /*
+ * Allocate memory for the job...
+ */
-#ifdef __APPLE__
- strcpy(apple_language, "APPLE_LANGUAGE=");
- _cupsAppleLanguage(attr->values[0].string.text,
- apple_language + 15, sizeof(apple_language) - 15);
-#endif /* __APPLE__ */
+ if ((job = calloc(sizeof(cupsd_job_t), 1)) == NULL)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Ran out of memory for jobs.");
+ cupsDirClose(dir);
+ return;
+ }
- switch (strlen(attr->values[0].string.text))
- {
- default :
- /*
- * This is an unknown or badly formatted language code; use
- * the POSIX locale...
- */
+ /*
+ * Assign the job ID...
+ */
- strcpy(lang, "LANG=C");
- break;
+ job->id = atoi(dent->filename + 1);
+ job->back_pipes[0] = -1;
+ job->back_pipes[1] = -1;
+ job->print_pipes[0] = -1;
+ job->print_pipes[1] = -1;
+ job->side_pipes[0] = -1;
+ job->side_pipes[1] = -1;
+ job->status_pipes[0] = -1;
+ job->status_pipes[1] = -1;
- case 2 :
- /*
- * Just the language code (ll)...
- */
+ if (job->id >= NextJobId)
+ NextJobId = job->id + 1;
- snprintf(lang, sizeof(lang), "LANG=%s.UTF8",
- attr->values[0].string.text);
- break;
+ /*
+ * Load the job...
+ */
- case 5 :
+ if (cupsdLoadJob(job))
+ {
/*
- * Language and country code (ll-cc)...
- */
+ * Insert the job into the array, sorting by job priority and ID...
+ */
- snprintf(lang, sizeof(lang), "LANG=%c%c_%c%c.UTF8",
- attr->values[0].string.text[0],
- attr->values[0].string.text[1],
- toupper(attr->values[0].string.text[3] & 255),
- toupper(attr->values[0].string.text[4] & 255));
- break;
- }
+ cupsArrayAdd(Jobs, job);
- attr = ippFindAttribute(job->attrs, "document-format",
- IPP_TAG_MIMETYPE);
- if (attr != NULL &&
- (optptr = strstr(attr->values[0].string.text, "charset=")) != NULL)
- snprintf(charset, sizeof(charset), "CHARSET=%s", optptr + 8);
- else
- {
- attr = ippFindAttribute(job->attrs, "attributes-charset",
- IPP_TAG_CHARSET);
- snprintf(charset, sizeof(charset), "CHARSET=%s",
- attr->values[0].string.text);
- }
+ if (job->state_value <= IPP_JOB_STOPPED)
+ cupsArrayAdd(ActiveJobs, job);
+ else
+ unload_job(job);
+ }
+ else
+ free(job);
+ }
- snprintf(content_type, sizeof(content_type), "CONTENT_TYPE=%s/%s",
- job->filetypes[job->current_file]->super,
- job->filetypes[job->current_file]->type);
- snprintf(device_uri, sizeof(device_uri), "DEVICE_URI=%s",
- printer->device_uri);
- cupsdSanitizeURI(printer->device_uri, sani_uri, sizeof(sani_uri));
- snprintf(ppd, sizeof(ppd), "PPD=%s/ppd/%s.ppd", ServerRoot, printer->name);
- snprintf(printer_name, sizeof(printer_name), "PRINTER=%s", printer->name);
- snprintf(rip_max_cache, sizeof(rip_max_cache), "RIP_MAX_CACHE=%s", RIPCache);
+ cupsDirClose(dir);
+}
- envc = cupsdLoadEnv(envp, (int)(sizeof(envp) / sizeof(envp[0])));
- envp[envc ++] = charset;
- envp[envc ++] = lang;
-#ifdef __APPLE__
- envp[envc ++] = apple_language;
-#endif /* __APPLE__ */
- envp[envc ++] = ppd;
- envp[envc ++] = rip_max_cache;
- envp[envc ++] = content_type;
- envp[envc ++] = device_uri;
- envp[envc ++] = printer_name;
+/*
+ * 'remove_job_files()' - Remove the document files for a job.
+ */
- if (!printer->remote && !printer->raw)
- {
- filter = (mime_filter_t *)cupsArrayLast(filters);
+static void
+remove_job_files(cupsd_job_t *job) /* I - Job */
+{
+ int i; /* Looping var */
+ char filename[1024]; /* Document filename */
- if (printer->port_monitor)
- filter = (mime_filter_t *)cupsArrayPrev(filters);
- if (filter && filter->dst)
- {
- snprintf(final_content_type, sizeof(final_content_type),
- "FINAL_CONTENT_TYPE=%s/%s",
- filter->dst->super, filter->dst->type);
- envp[envc ++] = final_content_type;
- }
- }
+ if (job->num_files <= 0)
+ return;
- if (Classification && !banner_page)
+ for (i = 1; i <= job->num_files; i ++)
{
- if ((attr = ippFindAttribute(job->attrs, "job-sheets",
- IPP_TAG_NAME)) == NULL)
- snprintf(classification, sizeof(classification), "CLASSIFICATION=%s",
- Classification);
- else if (attr->num_values > 1 &&
- strcmp(attr->values[1].string.text, "none") != 0)
- snprintf(classification, sizeof(classification), "CLASSIFICATION=%s",
- attr->values[1].string.text);
- else
- snprintf(classification, sizeof(classification), "CLASSIFICATION=%s",
- attr->values[0].string.text);
-
- envp[envc ++] = classification;
+ snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
+ job->id, i);
+ cupsdUnlinkOrRemoveFile(filename);
}
- if (job->dtype & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT))
- {
- snprintf(class_name, sizeof(class_name), "CLASS=%s", job->dest);
- envp[envc ++] = class_name;
- }
+ free(job->filetypes);
+ free(job->compressions);
- if (job->auth_username)
- envp[envc ++] = job->auth_username;
- if (job->auth_domain)
- envp[envc ++] = job->auth_domain;
- if (job->auth_password)
- envp[envc ++] = job->auth_password;
+ job->file_time = 0;
+ job->num_files = 0;
+ job->filetypes = NULL;
+ job->compressions = NULL;
-#ifdef HAVE_GSSAPI
- if (job->ccname)
- envp[envc ++] = job->ccname;
-#endif /* HAVE_GSSAPI */
+ LastEvent |= CUPSD_EVENT_PRINTER_STATE_CHANGED;
+}
- envp[envc] = NULL;
- for (i = 0; i < envc; i ++)
- if (!strncmp(envp[i], "AUTH_", 5))
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] envp[%d]=\"AUTH_%c****\"",
- job->id, i, envp[i][5]);
- else if (strncmp(envp[i], "DEVICE_URI=", 11))
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] envp[%d]=\"%s\"",
- job->id, i, envp[i]);
- else
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] envp[%d]=\"DEVICE_URI=%s\"",
- job->id, i, sani_uri);
+/*
+ * 'remove_job_history()' - Remove the control file for a job.
+ */
+
+static void
+remove_job_history(cupsd_job_t *job) /* I - Job */
+{
+ char filename[1024]; /* Control filename */
- if (printer->remote)
- job->current_file = job->num_files;
- else
- job->current_file ++;
/*
- * Now create processes for all of the filters...
+ * Remove the job info file...
*/
- filterfds[0][0] = -1;
- filterfds[0][1] = -1;
- filterfds[1][0] = -1;
- filterfds[1][1] = -1;
+ snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot,
+ job->id);
+ cupsdUnlinkOrRemoveFile(filename);
- if (!job->status_buffer)
- {
- if (cupsdOpenPipe(job->status_pipes))
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to create job status pipes - %s.",
- job->id, strerror(errno));
- snprintf(printer->state_message, sizeof(printer->state_message),
- "Unable to create status pipes - %s.", strerror(errno));
+ LastEvent |= CUPSD_EVENT_PRINTER_STATE_CHANGED;
+}
- cupsdAddPrinterHistory(printer);
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job,
- "Job canceled because the server could not create the job "
- "status pipes.");
+/*
+ * 'set_time()' - Set one of the "time-at-xyz" attributes.
+ */
- goto abort_job;
- }
+static void
+set_time(cupsd_job_t *job, /* I - Job to update */
+ const char *name) /* I - Name of attribute */
+{
+ ipp_attribute_t *attr; /* Time attribute */
+ time_t curtime; /* Current time */
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: status_pipes = [ %d %d ]",
- job->id, job->status_pipes[0], job->status_pipes[1]);
- job->status_buffer = cupsdStatBufNew(job->status_pipes[0], "[Job %d]",
- job->id);
- job->status_level = CUPSD_LOG_INFO;
- }
+ curtime = time(NULL);
- job->status = 0;
- memset(job->filters, 0, sizeof(job->filters));
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "%s=%ld", name, (long)curtime);
- if (!job->profile)
- job->profile = cupsdCreateProfile(job->id);
+ if ((attr = ippFindAttribute(job->attrs, name, IPP_TAG_ZERO)) != NULL)
+ {
+ attr->value_tag = IPP_TAG_INTEGER;
+ attr->values[0].integer = curtime;
+ }
- for (i = 0, slot = 0, filter = (mime_filter_t *)cupsArrayFirst(filters);
- filter;
- i ++, filter = (mime_filter_t *)cupsArrayNext(filters))
+ if (!strcmp(name, "time-at-completed"))
{
- if (filter->filter[0] != '/')
- snprintf(command, sizeof(command), "%s/filter/%s", ServerBin,
- filter->filter);
+ if (JobHistory < INT_MAX && attr)
+ job->history_time = attr->values[0].integer + JobHistory;
else
- strlcpy(command, filter->filter, sizeof(command));
-
- if (i < (cupsArrayCount(filters) - 1))
- {
- if (cupsdOpenPipe(filterfds[slot]))
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to create job filter pipes - %s.",
- job->id, strerror(errno));
- snprintf(printer->state_message, sizeof(printer->state_message),
- "Unable to create filter pipes - %s.", strerror(errno));
- cupsdAddPrinterHistory(printer);
+ job->history_time = INT_MAX;
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job,
- "Job canceled because the server could not create the "
- "filter pipes.");
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
- goto abort_job;
- }
- }
+ if (JobFiles < INT_MAX && attr)
+ job->file_time = attr->values[0].integer + JobFiles;
else
- {
- if (job->current_file == 1)
- {
- if (strncmp(printer->device_uri, "file:", 5) != 0)
- {
- if (cupsdOpenPipe(job->print_pipes))
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to create job backend pipes - %s.",
- job->id, strerror(errno));
- snprintf(printer->state_message, sizeof(printer->state_message),
- "Unable to create backend pipes - %s.", strerror(errno));
- cupsdAddPrinterHistory(printer);
-
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job,
- "Job canceled because the server could not create "
- "the backend pipes.");
-
- goto abort_job;
- }
- }
- else
- {
- job->print_pipes[0] = -1;
- if (!strcmp(printer->device_uri, "file:/dev/null") ||
- !strcmp(printer->device_uri, "file:///dev/null"))
- job->print_pipes[1] = -1;
- else
- {
- if (!strncmp(printer->device_uri, "file:/dev/", 10))
- job->print_pipes[1] = open(printer->device_uri + 5,
- O_WRONLY | O_EXCL);
- else if (!strncmp(printer->device_uri, "file:///dev/", 12))
- job->print_pipes[1] = open(printer->device_uri + 7,
- O_WRONLY | O_EXCL);
- else if (!strncmp(printer->device_uri, "file:///", 8))
- job->print_pipes[1] = open(printer->device_uri + 7,
- O_WRONLY | O_CREAT | O_TRUNC, 0600);
- else
- job->print_pipes[1] = open(printer->device_uri + 5,
- O_WRONLY | O_CREAT | O_TRUNC, 0600);
-
- if (job->print_pipes[1] < 0)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to open output file \"%s\" - %s.",
- job->id, printer->device_uri, strerror(errno));
- snprintf(printer->state_message, sizeof(printer->state_message),
- "Unable to open output file \"%s\" - %s.",
- printer->device_uri, strerror(errno));
-
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job,
- "Job canceled because the server could not open the "
- "output file.");
-
- goto abort_job;
- }
-
- fcntl(job->print_pipes[1], F_SETFD,
- fcntl(job->print_pipes[1], F_GETFD) | FD_CLOEXEC);
- }
- }
+ job->file_time = INT_MAX;
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: print_pipes = [ %d %d ]",
- job->id, job->print_pipes[0], job->print_pipes[1]);
- }
-
- filterfds[slot][0] = job->print_pipes[0];
- filterfds[slot][1] = job->print_pipes[1];
- }
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "[Job %d] start_job: filter=\"%s\"",
- job->id, command);
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: filterfds[%d]=[ %d %d ]",
- job->id, slot, filterfds[slot][0], filterfds[slot][1]);
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "set_time: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
+ }
+}
- pid = cupsdStartProcess(command, argv, envp, filterfds[!slot][0],
- filterfds[slot][1], job->status_pipes[1],
- job->back_pipes[0], job->side_pipes[0], 0,
- job->profile, job->filters + i);
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing filter pipes for slot %d "
- "[ %d %d ]...",
- job->id, !slot, filterfds[!slot][0], filterfds[!slot][1]);
+/*
+ * 'start_job()' - Start a print job.
+ */
- cupsdClosePipe(filterfds[!slot]);
+static void
+start_job(cupsd_job_t *job, /* I - Job ID */
+ cupsd_printer_t *printer) /* I - Printer to print job */
+{
+ const char *filename; /* Support filename */
+ ipp_attribute_t *cancel_after = ippFindAttribute(job->attrs,
+ "job-cancel-after",
+ IPP_TAG_INTEGER);
+ /* job-cancel-after attribute */
- if (pid == 0)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to start filter \"%s\" - %s.",
- job->id, filter->filter, strerror(errno));
- snprintf(printer->state_message, sizeof(printer->state_message),
- "Unable to start filter \"%s\" - %s.",
- filter->filter, strerror(errno));
- cupsdAddPrinterHistory(printer);
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "start_job(job=%p(%d), printer=%p(%s))",
+ job, job->id, printer, printer->name);
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job,
- "Job canceled because the server could not execute a "
- "filter.");
+ /*
+ * Make sure we have some files around before we try to print...
+ */
- goto abort_job;
- }
+ if (job->num_files == 0)
+ {
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
+ cupsdSetJobState(job, IPP_JOB_ABORTED, CUPSD_JOB_DEFAULT,
+ "Aborting job because it has no files.");
+ return;
+ }
- cupsdLogMessage(CUPSD_LOG_INFO, "[Job %d] Started filter %s (PID %d)",
- job->id, command, pid);
+ /*
+ * Update the printer and job state to "processing"...
+ */
- argv[6] = NULL;
- slot = !slot;
- }
+ if (!cupsdLoadJob(job))
+ return;
- cupsArrayDelete(filters);
+ if (!job->printer_message)
+ job->printer_message = ippFindAttribute(job->attrs,
+ "job-printer-state-message",
+ IPP_TAG_TEXT);
+ if (job->printer_message)
+ cupsdSetString(&(job->printer_message->values[0].string.text), "");
+
+ ippSetString(job->attrs, &job->reasons, 0, "job-printing");
+ cupsdSetJobState(job, IPP_JOB_PROCESSING, CUPSD_JOB_DEFAULT, NULL);
+ cupsdSetPrinterState(printer, IPP_PRINTER_PROCESSING, 0);
+ cupsdSetPrinterReasons(printer, "-cups-remote-pending,"
+ "cups-remote-pending-held,"
+ "cups-remote-processing,"
+ "cups-remote-stopped,"
+ "cups-remote-canceled,"
+ "cups-remote-aborted,"
+ "cups-remote-completed");
+
+ job->cost = 0;
+ job->current_file = 0;
+ job->file_time = 0;
+ job->history_time = 0;
+ job->progress = 0;
+ job->printer = printer;
+ printer->job = job;
+
+ if (cancel_after)
+ job->cancel_time = time(NULL) + ippGetInteger(cancel_after, 0);
+ else if (MaxJobTime > 0)
+ job->cancel_time = time(NULL) + MaxJobTime;
+ else
+ job->cancel_time = 0;
/*
- * Finally, pipe the final output into a backend process if needed...
+ * Check for support files...
*/
- if (strncmp(printer->device_uri, "file:", 5) != 0)
+ cupsdSetPrinterReasons(job->printer, "-cups-missing-filter-warning,"
+ "cups-insecure-filter-warning");
+
+ if (printer->pc)
{
- if (job->current_file == 1 || printer->remote)
+ for (filename = (const char *)cupsArrayFirst(printer->pc->support_files);
+ filename;
+ filename = (const char *)cupsArrayNext(printer->pc->support_files))
{
- sscanf(printer->device_uri, "%254[^:]", method);
- snprintf(command, sizeof(command), "%s/backend/%s", ServerBin, method);
-
- /*
- * See if the backend needs to run as root...
- */
-
- if (RunUser)
- backroot = 0;
- else if (stat(command, &backinfo))
- backroot = 0;
- else
- backroot = !(backinfo.st_mode & (S_IRWXG | S_IRWXO));
+ if (_cupsFileCheck(filename, _CUPS_FILE_CHECK_FILE, !RunUser,
+ cupsdLogFCMessage, printer))
+ break;
+ }
+ }
- argv[0] = sani_uri;
+ /*
+ * Setup the last exit status and security profiles...
+ */
- filterfds[slot][0] = -1;
- filterfds[slot][1] = -1;
+ job->status = 0;
+ job->profile = cupsdCreateProfile(job->id);
- cupsdLogMessage(CUPSD_LOG_DEBUG2, "[Job %d] start_job: backend=\"%s\"",
- job->id, command);
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: filterfds[%d] = [ %d %d ]", job->id,
- slot, filterfds[slot][0], filterfds[slot][1]);
+ /*
+ * Create the status pipes and buffer...
+ */
- pid = cupsdStartProcess(command, argv, envp, filterfds[!slot][0],
- filterfds[slot][1], job->status_pipes[1],
- job->back_pipes[1], job->side_pipes[1],
- backroot, job->profile, &(job->backend));
+ if (cupsdOpenPipe(job->status_pipes))
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Unable to create job status pipes - %s.", strerror(errno));
- if (pid == 0)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to start backend \"%s\" - %s.",
- job->id, method, strerror(errno));
- snprintf(printer->state_message, sizeof(printer->state_message),
- "Unable to start backend \"%s\" - %s.", method,
- strerror(errno));
+ cupsdSetJobState(job, IPP_JOB_STOPPED, CUPSD_JOB_DEFAULT,
+ "Job stopped because the scheduler could not create the "
+ "job status pipes.");
- cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job,
- "Job canceled because the server could not execute "
- "the backend.");
+ cupsdDestroyProfile(job->profile);
+ job->profile = NULL;
+ return;
+ }
- goto abort_job;
- }
- else
- {
- cupsdLogMessage(CUPSD_LOG_INFO, "[Job %d] Started backend %s (PID %d)",
- job->id, command, pid);
- }
- }
+ job->status_buffer = cupsdStatBufNew(job->status_pipes[0], NULL);
+ job->status_level = CUPSD_LOG_INFO;
- if (job->current_file == job->num_files)
- {
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing print pipes [ %d %d ]...",
- job->id, job->print_pipes[0], job->print_pipes[1]);
+ /*
+ * Create the backchannel pipes and make them non-blocking...
+ */
- cupsdClosePipe(job->print_pipes);
+ if (cupsdOpenPipe(job->back_pipes))
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Unable to create back-channel pipes - %s.", strerror(errno));
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing back pipes [ %d %d ]...",
- job->id, job->back_pipes[0], job->back_pipes[1]);
+ cupsdSetJobState(job, IPP_JOB_STOPPED, CUPSD_JOB_DEFAULT,
+ "Job stopped because the scheduler could not create the "
+ "back-channel pipes.");
- cupsdClosePipe(job->back_pipes);
+ cupsdClosePipe(job->status_pipes);
+ cupsdStatBufDelete(job->status_buffer);
+ job->status_buffer = NULL;
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing side pipes [ %d %d ]...",
- job->id, job->side_pipes[0], job->side_pipes[1]);
+ cupsdDestroyProfile(job->profile);
+ job->profile = NULL;
+ return;
+ }
- cupsdClosePipe(job->side_pipes);
+ fcntl(job->back_pipes[0], F_SETFL,
+ fcntl(job->back_pipes[0], F_GETFL) | O_NONBLOCK);
+ fcntl(job->back_pipes[1], F_SETFL,
+ fcntl(job->back_pipes[1], F_GETFL) | O_NONBLOCK);
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing status output pipe %d...",
- job->id, job->status_pipes[1]);
+ /*
+ * Create the side-channel pipes and make them non-blocking...
+ */
- close(job->status_pipes[1]);
- job->status_pipes[1] = -1;
- }
- }
- else
+ if (socketpair(AF_LOCAL, SOCK_STREAM, 0, job->side_pipes))
{
- filterfds[slot][0] = -1;
- filterfds[slot][1] = -1;
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Unable to create side-channel pipes - %s.", strerror(errno));
- if (job->current_file == job->num_files)
- {
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing print pipes [ %d %d ]...",
- job->id, job->print_pipes[0], job->print_pipes[1]);
+ cupsdSetJobState(job, IPP_JOB_STOPPED, CUPSD_JOB_DEFAULT,
+ "Job stopped because the scheduler could not create the "
+ "side-channel pipes.");
- cupsdClosePipe(job->print_pipes);
+ cupsdClosePipe(job->back_pipes);
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing status output pipe %d...",
- job->id, job->status_pipes[1]);
+ cupsdClosePipe(job->status_pipes);
+ cupsdStatBufDelete(job->status_buffer);
+ job->status_buffer = NULL;
- close(job->status_pipes[1]);
- job->status_pipes[1] = -1;
- }
+ cupsdDestroyProfile(job->profile);
+ job->profile = NULL;
+ return;
}
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing filter pipes for slot %d "
- "[ %d %d ]...",
- job->id, slot, filterfds[slot][0], filterfds[slot][1]);
- cupsdClosePipe(filterfds[slot]);
+ fcntl(job->side_pipes[0], F_SETFL,
+ fcntl(job->side_pipes[0], F_GETFL) | O_NONBLOCK);
+ fcntl(job->side_pipes[1], F_SETFL,
+ fcntl(job->side_pipes[1], F_GETFL) | O_NONBLOCK);
- if (printer->remote && job->num_files > 1)
- {
- for (i = 0; i < job->num_files; i ++)
- free(argv[i + 6]);
- }
+ fcntl(job->side_pipes[0], F_SETFD,
+ fcntl(job->side_pipes[0], F_GETFD) | FD_CLOEXEC);
+ fcntl(job->side_pipes[1], F_SETFD,
+ fcntl(job->side_pipes[1], F_GETFD) | FD_CLOEXEC);
- free(argv);
+ /*
+ * Now start the first file in the job...
+ */
- cupsdAddSelect(job->status_buffer->fd, (cupsd_selfunc_t)update_job, NULL,
- job);
+ cupsdContinueJob(job);
+}
- cupsdAddEvent(CUPSD_EVENT_JOB_STATE, job->printer, job, "Job #%d started.",
- job->id);
- return;
+/*
+ * 'stop_job()' - Stop a print job.
+ */
+static void
+stop_job(cupsd_job_t *job, /* I - Job */
+ cupsd_jobaction_t action) /* I - Action */
+{
+ int i; /* Looping var */
- /*
- * If we get here, we need to abort the current job and close out all
- * files and pipes...
- */
- abort_job:
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "stop_job(job=%p(%d), action=%d)", job,
+ job->id, action);
- for (slot = 0; slot < 2; slot ++)
- {
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing filter pipes for slot %d "
- "[ %d %d ]...",
- job->id, slot, filterfds[slot][0], filterfds[slot][1]);
- cupsdClosePipe(filterfds[slot]);
- }
+ FilterLevel -= job->cost;
+ job->cost = 0;
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "[Job %d] start_job: Closing status pipes [ %d %d ]...",
- job->id, job->status_pipes[0], job->status_pipes[1]);
- cupsdClosePipe(job->status_pipes);
- cupsdStatBufDelete(job->status_buffer);
+ if (action == CUPSD_JOB_DEFAULT && !job->kill_time)
+ job->kill_time = time(NULL) + JobKillDelay;
+ else if (action >= CUPSD_JOB_FORCE)
+ job->kill_time = 0;
- job->status_buffer = NULL;
+ for (i = 0; job->filters[i]; i ++)
+ if (job->filters[i] > 0)
+ {
+ cupsdEndProcess(job->filters[i], action >= CUPSD_JOB_FORCE);
- cupsArrayDelete(filters);
+ if (action >= CUPSD_JOB_FORCE)
+ job->filters[i] = -job->filters[i];
+ }
- if (printer->remote && job->num_files > 1)
+ if (job->backend > 0)
{
- for (i = 0; i < job->num_files; i ++)
- free(argv[i + 6]);
+ cupsdEndProcess(job->backend, action >= CUPSD_JOB_FORCE);
+
+ if (action >= CUPSD_JOB_FORCE)
+ job->backend = -job->backend;
}
- free(argv);
+ if (action >= CUPSD_JOB_FORCE)
+ {
+ /*
+ * Clear job status...
+ */
- cupsdStopJob(job, 0);
+ job->status = 0;
+ }
}
if (!job->attrs)
return;
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] Unloading...", job->id);
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unloading...");
ippDelete(job->attrs);
job->attrs = NULL;
job->state = NULL;
+ job->reasons = NULL;
job->sheets = NULL;
job->job_sheets = NULL;
job->printer_message = NULL;
{
int i; /* Looping var */
int copies; /* Number of copies printed */
- char message[1024], /* Message text */
+ char message[CUPSD_SB_BUFFER_SIZE],
+ /* Message text */
*ptr; /* Pointer update... */
int loglevel, /* Log level for message */
event = 0; /* Events? */
+ static const char * const levels[] = /* Log levels */
+ {
+ "NONE",
+ "EMERG",
+ "ALERT",
+ "CRIT",
+ "ERROR",
+ "WARN",
+ "NOTICE",
+ "INFO",
+ "DEBUG",
+ "DEBUG2"
+ };
+
+ /*
+ * Get the printer associated with this job; if the printer is stopped for
+ * any reason then job->printer will be reset to NULL, so make sure we have
+ * a valid pointer...
+ */
while ((ptr = cupsdStatBufUpdate(job->status_buffer, &loglevel,
message, sizeof(message))) != NULL)
* job sheet count...
*/
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "PAGE: %s", message);
+
if (job->sheets)
{
- if (!strncasecmp(message, "total ", 6))
+ if (!_cups_strncasecmp(message, "total ", 6))
{
/*
* Got a total count of pages from a backend or filter...
job->sheets->values[0].integer += copies;
if (job->printer->page_limit)
- {
- cupsd_quota_t *q = cupsdUpdateQuota(job->printer, job->username,
- copies, 0);
-
-#ifdef __APPLE__
- if (AppleQuotas && q->page_count == -3)
- {
- /*
- * Quota limit exceeded, cancel job in progress immediately...
- */
-
- cupsdLogMessage(CUPSD_LOG_INFO,
- "[Job %d] Canceled because pages exceed user %s "
- "quota limit on printer %s (%s).",
- job->id, job->username, job->printer->name,
- job->printer->info);
-
- cupsdCancelJob(job, 1, IPP_JOB_CANCELED);
- return;
- }
-#else
- (void)q;
-#endif /* __APPLE__ */
- }
+ cupsdUpdateQuota(job->printer, job->username, copies, 0);
}
cupsdLogPage(job, message);
cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job,
"Printed %d page(s).", job->sheets->values[0].integer);
}
+ else if (loglevel == CUPSD_LOG_JOBSTATE)
+ {
+ /*
+ * Support "keyword" to set job-state-reasons to the specified keyword.
+ * This is sufficient for the current paid printing stuff.
+ */
+
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "JOBSTATE: %s", message);
+
+ ippSetString(job->attrs, &job->reasons, 0, message);
+ }
else if (loglevel == CUPSD_LOG_STATE)
{
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "STATE: %s", message);
+
if (!strcmp(message, "paused"))
{
cupsdStopPrinter(job->printer, 1);
return;
}
- else
+ else if (message[0] && cupsdSetPrinterReasons(job->printer, message))
{
- cupsdSetPrinterReasons(job->printer, message);
- cupsdAddPrinterHistory(job->printer);
event |= CUPSD_EVENT_PRINTER_STATE;
+
+ if (MaxJobTime > 0)
+ {
+ /*
+ * Reset cancel time after connecting to the device...
+ */
+
+ ipp_attribute_t *cancel_after = ippFindAttribute(job->attrs,
+ "job-cancel-after",
+ IPP_TAG_INTEGER);
+ /* job-cancel-after attribute */
+
+ for (i = 0; i < job->printer->num_reasons; i ++)
+ if (!strcmp(job->printer->reasons[i], "connecting-to-device"))
+ break;
+
+ if (i >= job->printer->num_reasons)
+ {
+ if (cancel_after)
+ job->cancel_time = time(NULL) + ippGetInteger(cancel_after, 0);
+ else
+ job->cancel_time = time(NULL) + MaxJobTime;
+ }
+ }
}
- update_job_attrs(job);
+ update_job_attrs(job, 0);
}
else if (loglevel == CUPSD_LOG_ATTR)
{
cups_option_t *attrs; /* Attributes */
const char *attr; /* Attribute */
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "ATTR: %s", message);
num_attrs = cupsParseOptions(message, 0, &attrs);
+ if ((attr = cupsGetOption("auth-info-default", num_attrs,
+ attrs)) != NULL)
+ {
+ job->printer->num_options = cupsAddOption("auth-info", attr,
+ job->printer->num_options,
+ &(job->printer->options));
+ cupsdSetPrinterAttrs(job->printer);
+
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ }
+
if ((attr = cupsGetOption("auth-info-required", num_attrs,
attrs)) != NULL)
{
cupsdSetAuthInfoRequired(job->printer, attr, NULL);
cupsdSetPrinterAttrs(job->printer);
- if (job->printer->type & CUPS_PRINTER_DISCOVERED)
- cupsdMarkDirty(CUPSD_DIRTY_REMOTE);
- else
- cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ }
+
+ if ((attr = cupsGetOption("job-media-progress", num_attrs,
+ attrs)) != NULL)
+ {
+ int progress = atoi(attr);
+
+
+ if (progress >= 0 && progress <= 100)
+ {
+ job->progress = progress;
+
+ if (job->sheets)
+ cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job,
+ "Printing page %d, %d%%",
+ job->sheets->values[0].integer, job->progress);
+ }
}
if ((attr = cupsGetOption("printer-alert", num_attrs, attrs)) != NULL)
cupsdSetPrinterAttr(job->printer, "marker-colors", (char *)attr);
job->printer->marker_time = time(NULL);
event |= CUPSD_EVENT_PRINTER_STATE;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
}
if ((attr = cupsGetOption("marker-levels", num_attrs, attrs)) != NULL)
cupsdSetPrinterAttr(job->printer, "marker-levels", (char *)attr);
job->printer->marker_time = time(NULL);
event |= CUPSD_EVENT_PRINTER_STATE;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ }
+
+ if ((attr = cupsGetOption("marker-low-levels", num_attrs, attrs)) != NULL)
+ {
+ cupsdSetPrinterAttr(job->printer, "marker-low-levels", (char *)attr);
+ job->printer->marker_time = time(NULL);
+ event |= CUPSD_EVENT_PRINTER_STATE;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ }
+
+ if ((attr = cupsGetOption("marker-high-levels", num_attrs, attrs)) != NULL)
+ {
+ cupsdSetPrinterAttr(job->printer, "marker-high-levels", (char *)attr);
+ job->printer->marker_time = time(NULL);
+ event |= CUPSD_EVENT_PRINTER_STATE;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ }
+
+ if ((attr = cupsGetOption("marker-message", num_attrs, attrs)) != NULL)
+ {
+ cupsdSetPrinterAttr(job->printer, "marker-message", (char *)attr);
+ job->printer->marker_time = time(NULL);
+ event |= CUPSD_EVENT_PRINTER_STATE;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
}
if ((attr = cupsGetOption("marker-names", num_attrs, attrs)) != NULL)
cupsdSetPrinterAttr(job->printer, "marker-names", (char *)attr);
job->printer->marker_time = time(NULL);
event |= CUPSD_EVENT_PRINTER_STATE;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
}
if ((attr = cupsGetOption("marker-types", num_attrs, attrs)) != NULL)
cupsdSetPrinterAttr(job->printer, "marker-types", (char *)attr);
job->printer->marker_time = time(NULL);
event |= CUPSD_EVENT_PRINTER_STATE;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
}
cupsFreeOptions(num_attrs, attrs);
* Set attribute(s)...
*/
- int num_keywords; /* Number of keywords */
- cups_option_t *keywords; /* Keywords */
-
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "PPD: %s", message);
- num_keywords = cupsParseOptions(message, 0, &keywords);
-
- if (cupsdUpdatePrinterPPD(job->printer, num_keywords, keywords))
- cupsdSetPrinterAttrs(job->printer);
-
- cupsFreeOptions(num_keywords, keywords);
+ job->num_keywords = cupsParseOptions(message, job->num_keywords,
+ &job->keywords);
}
-#ifdef __APPLE__
- else if (!strncmp(message, "recoverable:", 12))
+ else
{
- cupsdSetPrinterReasons(job->printer,
- "+com.apple.print.recoverable-warning");
+ /*
+ * Strip legacy message prefix...
+ */
- ptr = message + 12;
- while (isspace(*ptr & 255))
- ptr ++;
+ if (!strncmp(message, "recoverable:", 12))
+ {
+ ptr = message + 12;
+ while (isspace(*ptr & 255))
+ ptr ++;
+ }
+ else if (!strncmp(message, "recovered:", 10))
+ {
+ ptr = message + 10;
+ while (isspace(*ptr & 255))
+ ptr ++;
+ }
+ else
+ ptr = message;
- cupsdSetString(&job->printer->recoverable, ptr);
- cupsdAddPrinterHistory(job->printer);
- event |= CUPSD_EVENT_PRINTER_STATE;
- }
- else if (!strncmp(message, "recovered:", 10))
- {
- cupsdSetPrinterReasons(job->printer,
- "-com.apple.print.recoverable-warning");
+ if (*ptr)
+ cupsdLogJob(job, loglevel, "%s", ptr);
- ptr = message + 10;
- while (isspace(*ptr & 255))
- ptr ++;
+ if (loglevel < CUPSD_LOG_DEBUG &&
+ strcmp(job->printer->state_message, ptr))
+ {
+ strlcpy(job->printer->state_message, ptr,
+ sizeof(job->printer->state_message));
- cupsdSetString(&job->printer->recoverable, ptr);
- cupsdAddPrinterHistory(job->printer);
- event |= CUPSD_EVENT_PRINTER_STATE;
- }
-#endif /* __APPLE__ */
- else if (loglevel <= job->status_level)
- {
- /*
- * Some message to show in the printer-state-message attribute...
- */
+ event |= CUPSD_EVENT_PRINTER_STATE | CUPSD_EVENT_JOB_PROGRESS;
+
+ if (loglevel <= job->status_level && job->status_level > CUPSD_LOG_ERROR)
+ {
+ /*
+ * Some messages show in the job-printer-state-message attribute...
+ */
- if (loglevel != CUPSD_LOG_NOTICE)
- job->status_level = loglevel;
+ if (loglevel != CUPSD_LOG_NOTICE)
+ job->status_level = loglevel;
- strlcpy(job->printer->state_message, message,
- sizeof(job->printer->state_message));
- cupsdAddPrinterHistory(job->printer);
- event |= CUPSD_EVENT_PRINTER_STATE;
+ update_job_attrs(job, 1);
- update_job_attrs(job);
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Set job-printer-state-message to \"%s\", "
+ "current level=%s",
+ job->printer_message->values[0].string.text,
+ levels[job->status_level]);
+ }
+ }
}
if (!strchr(job->status_buffer->buffer, '\n'))
break;
}
+ if (event & CUPSD_EVENT_JOB_PROGRESS)
+ cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job,
+ "%s", job->printer->state_message);
if (event & CUPSD_EVENT_PRINTER_STATE)
cupsdAddEvent(CUPSD_EVENT_PRINTER_STATE, job->printer, NULL,
(job->printer->type & CUPS_PRINTER_CLASS) ?
"Printer \"%s\" state changed.",
job->printer->name);
+
if (ptr == NULL && !job->status_buffer->bufused)
{
/*
for (i = 0; job->filters[i] < 0; i ++);
if (job->filters[i])
+ {
+ /*
+ * EOF but we haven't collected the exit status of all filters...
+ */
+
+ cupsdCheckProcess();
return;
+ }
if (job->current_file >= job->num_files && job->backend > 0)
+ {
+ /*
+ * EOF but we haven't collected the exit status of the backend...
+ */
+
+ cupsdCheckProcess();
return;
+ }
/*
* Handle the end of job stuff...
*/
- cupsdFinishJob(job);
+ finalize_job(job, 1);
+
+ /*
+ * Check for new jobs...
+ */
+
+ cupsdCheckJobs();
}
}
*/
void
-update_job_attrs(cupsd_job_t *job) /* I - Job to update */
+update_job_attrs(cupsd_job_t *job, /* I - Job to update */
+ int do_message)/* I - 1 = copy job-printer-state message */
{
int i; /* Looping var */
int num_reasons; /* Actual number of reasons */
const char * const *reasons; /* Reasons */
- static const char *none = "none", /* "none" */
- *paused = "paused";
- /* "paused" */
+ static const char *none = "none"; /* "none" reason */
/*
IPP_TAG_KEYWORD);
/*
- * If the job isn't printing, return now...
+ * Copy or clear the printer-state-message value as needed...
*/
- if (!job->printer)
- return;
-
- /*
- * Otherwise copy the printer-state-message value...
- */
+ if (job->state_value != IPP_JOB_PROCESSING &&
+ job->status_level == CUPSD_LOG_INFO)
+ {
+ cupsdSetString(&(job->printer_message->values[0].string.text), "");
- if (job->printer->state_message[0])
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ }
+ else if (job->printer->state_message[0] && do_message)
+ {
cupsdSetString(&(job->printer_message->values[0].string.text),
job->printer->state_message);
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ }
+
/*
* ... and the printer-state-reasons value...
*/
if (job->printer->num_reasons == 0)
{
num_reasons = 1;
- reasons = job->printer->state == IPP_PRINTER_STOPPED ? &paused : &none;
+ reasons = &none;
}
else
{
if (!job->printer_reasons || job->printer_reasons->num_values != num_reasons)
{
+ /*
+ * Replace/create a job-printer-state-reasons attribute...
+ */
+
ippDeleteAttribute(job->attrs, job->printer_reasons);
job->printer_reasons = ippAddStrings(job->attrs,
"job-printer-state-reasons",
num_reasons, NULL, NULL);
}
+ else
+ {
+ /*
+ * Don't bother clearing the reason strings if they are the same...
+ */
+
+ for (i = 0; i < num_reasons; i ++)
+ if (strcmp(job->printer_reasons->values[i].string.text, reasons[i]))
+ break;
+
+ if (i >= num_reasons)
+ return;
+
+ /*
+ * Not the same, so free the current strings...
+ */
+
+ for (i = 0; i < num_reasons; i ++)
+ _cupsStrFree(job->printer_reasons->values[i].string.text);
+ }
+
+ /*
+ * Copy the reasons...
+ */
for (i = 0; i < num_reasons; i ++)
- cupsdSetString(&(job->printer_reasons->values[i].string.text), reasons[i]);
+ job->printer_reasons->values[i].string.text = _cupsStrAlloc(reasons[i]);
+
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
}
/*
- * End of "$Id: job.c 7005 2007-10-01 23:45:48Z mike $".
+ * End of "$Id$".
*/