/*
- * "$Id: printers.c 7968 2008-09-19 23:03:01Z mike $"
+ * "$Id$"
*
- * Printer routines for the CUPS scheduler.
+ * Printer routines for the CUPS scheduler.
*
- * Copyright 2007-2012 by Apple Inc.
- * Copyright 1997-2007 by Easy Software Products, all rights reserved.
+ * Copyright 2007-2015 by Apple Inc.
+ * Copyright 1997-2007 by Easy Software Products, all rights reserved.
*
- * These coded instructions, statements, and computer programs are the
- * property of Apple Inc. and are protected by Federal copyright
- * law. Distribution and use rights are outlined in the file "LICENSE.txt"
- * which should have been included with this file. If this file is
- * file is missing or damaged, see the license at "http://www.cups.org/".
- *
- * Contents:
- *
- * cupsdAddPrinter() - Add a printer to the system.
- * cupsdCreateCommonData() - Create the common printer data.
- * cupsdDeleteAllPrinters() - Delete all printers from the system.
- * cupsdDeletePrinter() - Delete a printer from the system.
- * cupsdFindDest() - Find a destination in the list.
- * cupsdFindPrinter() - Find a printer in the list.
- * cupsdLoadAllPrinters() - Load printers from the printers.conf file.
- * cupsdRenamePrinter() - Rename a printer.
- * cupsdSaveAllPrinters() - Save all printer definitions to the
- * printers.conf file.
- * cupsdSetAuthInfoRequired() - Set the required authentication info.
- * cupsdSetDeviceURI() - Set the device URI for a printer.
- * cupsdSetPrinterAttr() - Set a printer attribute.
- * cupsdSetPrinterAttrs() - Set printer attributes based upon the PPD
- * file.
- * cupsdSetPrinterReasons() - Set/update the reasons strings.
- * cupsdSetPrinterState() - Update the current state of a printer.
- * cupsdStopPrinter() - Stop a printer from printing any jobs...
- * cupsdUpdatePrinterPPD() - Update keywords in a printer's PPD file.
- * cupsdUpdatePrinters() - Update printers after a partial reload.
- * cupsdValidateDest() - Validate a printer/class destination.
- * cupsdWritePrintcap() - Write a pseudo-printcap file for older
- * applications that need it...
- * add_printer_defaults() - Add name-default attributes to the printer
- * attributes.
- * add_printer_filter() - Add a MIME filter for a printer.
- * add_printer_formats() - Add document-format-supported values for a
- * printer.
- * compare_printers() - Compare two printers.
- * delete_printer_filters() - Delete all MIME filters for a printer.
- * dirty_printer() - Mark config and state files dirty for the
- * specified printer.
- * load_ppd() - Load a cached PPD file, updating the cache as
- * needed.
- * new_media_col() - Create a media-col collection value.
- * write_irix_config() - Update the config files used by the IRIX
- * desktop tools.
- * write_irix_state() - Update the status files used by IRIX printing
- * desktop tools.
- * write_xml_string() - Write a string with XML escaping.
+ * These coded instructions, statements, and computer programs are the
+ * property of Apple Inc. and are protected by Federal copyright
+ * law. Distribution and use rights are outlined in the file "LICENSE.txt"
+ * which should have been included with this file. If this file is
+ * file is missing or damaged, see the license at "http://www.cups.org/".
*/
/*
static void delete_printer_filters(cupsd_printer_t *p);
static void dirty_printer(cupsd_printer_t *p);
static void load_ppd(cupsd_printer_t *p);
-static void log_ipp_conformance(cupsd_printer_t *p, const char *reason);
static ipp_t *new_media_col(_pwg_size_t *size, const char *source,
const char *type);
-#ifdef __sgi
-static void write_irix_config(cupsd_printer_t *p);
-static void write_irix_state(cupsd_printer_t *p);
-#endif /* __sgi */
static void write_xml_string(cups_file_t *fp, const char *s);
httpAssembleURIf(HTTP_URI_CODING_ALL, uri, sizeof(uri), "ipp", NULL,
ServerName, RemotePort, "/printers/%s", name);
cupsdSetString(&p->uri, uri);
- cupsdSetString(&p->uuid, _httpAssembleUUID(ServerName, RemotePort, name, 0,
- uuid, sizeof(uuid)));
+ cupsdSetString(&p->uuid, httpAssembleUUID(ServerName, RemotePort, name, 0,
+ uuid, sizeof(uuid)));
cupsdSetDeviceURI(p, "file:///dev/null");
- p->state = IPP_PRINTER_STOPPED;
- p->state_time = time(NULL);
- p->accepting = 0;
- p->shared = DefaultShared;
- p->filetype = mimeAddType(MimeDatabase, "printer", name);
+ p->config_time = time(NULL);
+ p->state = IPP_PRINTER_STOPPED;
+ p->state_time = time(NULL);
+ p->accepting = 0;
+ p->shared = DefaultShared;
+ p->filetype = mimeAddType(MimeDatabase, "printer", name);
cupsdSetString(&p->job_sheets[0], "none");
cupsdSetString(&p->job_sheets[1], "none");
"third-shift",
"weekend"
};
+ static const char * const features[] =/* ipp-features-supported values */
+ {
+ "subscription-object"
+ };
static const char * const versions[] =/* ipp-versions-supported values */
{
"1.0",
};
static const int ops[] = /* operations-supported values */
{
- IPP_PRINT_JOB,
- IPP_VALIDATE_JOB,
- IPP_CREATE_JOB,
- IPP_SEND_DOCUMENT,
- IPP_CANCEL_JOB,
- IPP_GET_JOB_ATTRIBUTES,
- IPP_GET_JOBS,
- IPP_GET_PRINTER_ATTRIBUTES,
- IPP_HOLD_JOB,
- IPP_RELEASE_JOB,
- IPP_RESTART_JOB,
- IPP_PAUSE_PRINTER,
- IPP_RESUME_PRINTER,
- IPP_PURGE_JOBS,
- IPP_SET_PRINTER_ATTRIBUTES,
- IPP_SET_JOB_ATTRIBUTES,
- IPP_GET_PRINTER_SUPPORTED_VALUES,
- IPP_CREATE_PRINTER_SUBSCRIPTION,
- IPP_CREATE_JOB_SUBSCRIPTION,
- IPP_GET_SUBSCRIPTION_ATTRIBUTES,
- IPP_GET_SUBSCRIPTIONS,
- IPP_RENEW_SUBSCRIPTION,
- IPP_CANCEL_SUBSCRIPTION,
- IPP_GET_NOTIFICATIONS,
- IPP_ENABLE_PRINTER,
- IPP_DISABLE_PRINTER,
- IPP_HOLD_NEW_JOBS,
- IPP_RELEASE_HELD_NEW_JOBS,
- IPP_CANCEL_JOBS,
- IPP_CANCEL_MY_JOBS,
- IPP_CLOSE_JOB,
- CUPS_GET_DEFAULT,
- CUPS_GET_PRINTERS,
- CUPS_ADD_PRINTER,
- CUPS_DELETE_PRINTER,
- CUPS_GET_CLASSES,
- CUPS_ADD_CLASS,
- CUPS_DELETE_CLASS,
- CUPS_ACCEPT_JOBS,
- CUPS_REJECT_JOBS,
- CUPS_SET_DEFAULT,
- CUPS_GET_DEVICES,
- CUPS_GET_PPDS,
- CUPS_MOVE_JOB,
- CUPS_AUTHENTICATE_JOB,
- CUPS_GET_PPD,
- CUPS_GET_DOCUMENT,
- IPP_RESTART_JOB
+ IPP_OP_PRINT_JOB,
+ IPP_OP_VALIDATE_JOB,
+ IPP_OP_CREATE_JOB,
+ IPP_OP_SEND_DOCUMENT,
+ IPP_OP_CANCEL_JOB,
+ IPP_OP_GET_JOB_ATTRIBUTES,
+ IPP_OP_GET_JOBS,
+ IPP_OP_GET_PRINTER_ATTRIBUTES,
+ IPP_OP_HOLD_JOB,
+ IPP_OP_RELEASE_JOB,
+ IPP_OP_PAUSE_PRINTER,
+ IPP_OP_RESUME_PRINTER,
+ IPP_OP_PURGE_JOBS,
+ IPP_OP_SET_PRINTER_ATTRIBUTES,
+ IPP_OP_SET_JOB_ATTRIBUTES,
+ IPP_OP_GET_PRINTER_SUPPORTED_VALUES,
+ IPP_OP_CREATE_PRINTER_SUBSCRIPTIONS,
+ IPP_OP_CREATE_JOB_SUBSCRIPTIONS,
+ IPP_OP_GET_SUBSCRIPTION_ATTRIBUTES,
+ IPP_OP_GET_SUBSCRIPTIONS,
+ IPP_OP_RENEW_SUBSCRIPTION,
+ IPP_OP_CANCEL_SUBSCRIPTION,
+ IPP_OP_GET_NOTIFICATIONS,
+ IPP_OP_ENABLE_PRINTER,
+ IPP_OP_DISABLE_PRINTER,
+ IPP_OP_HOLD_NEW_JOBS,
+ IPP_OP_RELEASE_HELD_NEW_JOBS,
+ IPP_OP_CANCEL_JOBS,
+ IPP_OP_CANCEL_MY_JOBS,
+ IPP_OP_CLOSE_JOB,
+ IPP_OP_CUPS_GET_DEFAULT,
+ IPP_OP_CUPS_GET_PRINTERS,
+ IPP_OP_CUPS_ADD_MODIFY_PRINTER,
+ IPP_OP_CUPS_DELETE_PRINTER,
+ IPP_OP_CUPS_GET_CLASSES,
+ IPP_OP_CUPS_ADD_MODIFY_CLASS,
+ IPP_OP_CUPS_DELETE_CLASS,
+ IPP_OP_CUPS_ACCEPT_JOBS,
+ IPP_OP_CUPS_REJECT_JOBS,
+ IPP_OP_CUPS_SET_DEFAULT,
+ IPP_OP_CUPS_GET_DEVICES,
+ IPP_OP_CUPS_GET_PPDS,
+ IPP_OP_CUPS_MOVE_JOB,
+ IPP_OP_CUPS_AUTHENTICATE_JOB,
+ IPP_OP_CUPS_GET_PPD,
+ IPP_OP_CUPS_GET_DOCUMENT,
+ IPP_OP_RESTART_JOB
};
static const char * const charsets[] =/* charset-supported values */
{
};
static const char * const printer_settable[] =
{ /* printer-settable-attributes-supported */
+ "printer-geo-location",
"printer-info",
- "printer-location"
+ "printer-location",
+ "printer-organization",
+ "printer-organizational-unit"
};
static const char * const which_jobs[] =
{ /* which-jobs-supported values */
ippAddString(CommonData, IPP_TAG_PRINTER, IPP_TAG_LANGUAGE,
"generated-natural-language-supported", NULL, DefaultLanguage);
+ /* ipp-features-supported */
+ ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "ipp-features-supported", sizeof(features) / sizeof(features[0]), NULL, features);
+
/* ipp-versions-supported */
ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_TAG_KEYWORD | IPP_TAG_COPY,
"ipp-versions-supported", sizeof(versions) / sizeof(versions[0]),
ippAddInteger(CommonData, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"ippget-event-life", 15);
+ /* job-cancel-after-supported */
+ ippAddRange(CommonData, IPP_TAG_PRINTER, "job-cancel-after-supported",
+ 0, INT_MAX);
+
/* job-creation-attributes-supported */
ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_TAG_KEYWORD | IPP_TAG_COPY,
"job-creation-attributes-supported",
ippAddInteger(CommonData, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"multiple-operation-time-out", MultipleOperationTimeout);
+ /* multiple-operation-time-out-action */
+ ippAddString(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "multiple-operation-time-out-action", NULL, "process-job");
+
/* natural-language-configured (no IPP_TAG_COPY) */
ippAddString(CommonData, IPP_TAG_PRINTER, IPP_TAG_LANGUAGE,
"natural-language-configured", NULL, DefaultLanguage);
ippAddString(CommonData, IPP_TAG_PRINTER, IPP_TAG_KEYWORD | IPP_TAG_COPY,
"pdl-override-supported", NULL, "attempted");
+ /* printer-get-attributes-supported */
+ ippAddString(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "printer-get-attributes-supported", NULL, "document-format");
+
/* printer-op-policy-supported */
attr = ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_TAG_NAME | IPP_TAG_COPY,
"printer-op-policy-supported", cupsArrayCount(Policies),
{
int i, /* Looping var */
changed = 0; /* Class changed? */
-#ifdef __sgi
- char filename[1024]; /* Interface script filename */
-#endif /* __sgi */
cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdDeletePrinter(p=%p(%s), update=%d)",
"cupsdDeletePrinter: Removing %s from Printers", p->name);
cupsArrayRemove(Printers, p);
- /*
- * Remove the dummy interface/icon/option files under IRIX...
- */
-
-#ifdef __sgi
- snprintf(filename, sizeof(filename), "/var/spool/lp/interface/%s", p->name);
- unlink(filename);
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/gui_interface/ELF/%s.gui",
- p->name);
- unlink(filename);
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/activeicons/%s", p->name);
- unlink(filename);
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.config", p->name);
- unlink(filename);
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.status", p->name);
- unlink(filename);
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/member/%s", p->name);
- unlink(filename);
-#endif /* __sgi */
-
/*
* If p is the default printer, assign a different one...
*/
cupsdClearString(&p->hostname);
cupsdClearString(&p->name);
cupsdClearString(&p->location);
+ cupsdClearString(&p->geo_location);
cupsdClearString(&p->make_model);
cupsdClearString(&p->info);
cupsdClearString(&p->job_sheets[0]);
cupsdLogMessage(CUPSD_LOG_ERROR,
"Syntax error on line %d of printers.conf.", linenum);
}
- else if (!_cups_strcasecmp(line, "</Printer>"))
+ else if (!_cups_strcasecmp(line, "</Printer>") || !_cups_strcasecmp(line, "</DefaultPrinter>"))
{
if (p != NULL)
{
if (value)
cupsdSetString(&p->location, value);
}
+ else if (!_cups_strcasecmp(line, "GeoLocation"))
+ {
+ if (value)
+ cupsdSetString(&p->geo_location, value);
+ }
+ else if (!_cups_strcasecmp(line, "Organization"))
+ {
+ if (value)
+ cupsdSetString(&p->organization, value);
+ }
+ else if (!_cups_strcasecmp(line, "OrganizationalUnit"))
+ {
+ if (value)
+ cupsdSetString(&p->organizational_unit, value);
+ }
else if (!_cups_strcasecmp(line, "DeviceURI"))
{
if (value)
if (value)
p->state_time = atoi(value);
}
+ else if (!_cups_strcasecmp(line, "ConfigTime"))
+ {
+ /*
+ * Set the config time...
+ */
+
+ if (value)
+ p->config_time = atoi(value);
+ }
else if (!_cups_strcasecmp(line, "Accepting"))
{
/*
else if (!_cups_strcasecmp(line, "Type"))
{
if (value)
- p->type = atoi(value);
+ p->type = (cups_ptype_t)atoi(value);
else
cupsdLogMessage(CUPSD_LOG_ERROR,
"Syntax error on line %d of printers.conf.", linenum);
else if (!_cups_strcasecmp(line, "ErrorPolicy"))
{
if (value)
- cupsdSetString(&p->error_policy, value);
+ {
+ if (strcmp(value, "retry-current-job") &&
+ strcmp(value, "abort-job") &&
+ strcmp(value, "retry-job") &&
+ strcmp(value, "stop-printer"))
+ cupsdLogMessage(CUPSD_LOG_ALERT, "Invalid ErrorPolicy \"%s\" on line %d or printers.conf.", ErrorPolicy, linenum);
+ else
+ cupsdSetString(&p->error_policy, value);
+ }
else
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Syntax error on line %d of printers.conf.", linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Syntax error on line %d of printers.conf.", linenum);
}
else if (!_cups_strcasecmp(line, "Attribute") && value)
{
if (printer->location)
cupsFilePutConf(fp, "Location", printer->location);
+ if (printer->geo_location)
+ cupsFilePutConf(fp, "GeoLocation", printer->geo_location);
+
if (printer->make_model)
cupsFilePutConf(fp, "MakeModel", printer->make_model);
+ if (printer->organization)
+ cupsFilePutConf(fp, "Organization", printer->organization);
+
+ if (printer->organizational_unit)
+ cupsFilePutConf(fp, "OrganizationalUnit", printer->organizational_unit);
+
cupsFilePutConf(fp, "DeviceURI", printer->device_uri);
if (printer->port_monitor)
{
cupsFilePuts(fp, "State Stopped\n");
- if (printer->state_message)
+ if (printer->state_message[0])
cupsFilePutConf(fp, "StateMessage", printer->state_message);
}
else
cupsFilePuts(fp, "State Idle\n");
cupsFilePrintf(fp, "StateTime %d\n", (int)printer->state_time);
+ cupsFilePrintf(fp, "ConfigTime %d\n", (int)printer->config_time);
for (i = 0; i < printer->num_reasons; i ++)
if (strcmp(printer->reasons[i], "connecting-to-device") &&
if (i)
*ptr++ = ',';
- strlcpy(ptr, marker->values[i].string.text,
- value + sizeof(value) - ptr);
+ strlcpy(ptr, marker->values[i].string.text, (size_t)(value + sizeof(value) - ptr));
ptr += strlen(ptr);
}
if (i)
*ptr++ = ',';
- strlcpy(ptr, marker->values[i].string.text,
- value + sizeof(value) - ptr);
+ strlcpy(ptr, marker->values[i].string.text, (size_t)(value + sizeof(value) - ptr));
ptr += strlen(ptr);
}
if (i)
*ptr++ = ',';
- strlcpy(ptr, marker->values[i].string.text,
- value + sizeof(value) - ptr);
+ strlcpy(ptr, marker->values[i].string.text, (size_t)(value + sizeof(value) - ptr));
ptr += strlen(ptr);
}
cupsFilePrintf(fp, "Attribute marker-change-time %ld\n",
(long)printer->marker_time);
- cupsFilePuts(fp, "</Printer>\n");
-
-#ifdef __sgi
- /*
- * Make IRIX desktop & printer status happy
- */
-
- write_irix_state(printer);
-#endif /* __sgi */
+ if (printer == DefaultPrinter)
+ cupsFilePuts(fp, "</DefaultPrinter>\n");
+ else
+ cupsFilePuts(fp, "</Printer>\n");
}
cupsdCloseCreatedConfFile(fp, filename);
strcmp(p->auth_info_required[0], "none"))
p->type |= CUPS_PRINTER_AUTHENTICATED;
else
- p->type &= ~CUPS_PRINTER_AUTHENTICATED;
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_AUTHENTICATED;
return (1);
}
cupsdSetPrinterAttr(
cupsd_printer_t *p, /* I - Printer */
const char *name, /* I - Attribute name */
- char *value) /* I - Attribute value string */
+ const char *value) /* I - Attribute value string */
{
ipp_attribute_t *attr; /* Attribute */
int i, /* Looping var */
count; /* Number of values */
- char *ptr, /* Pointer into value */
+ char *temp, /* Temporary copy of value string */
+ *ptr, /* Pointer into value */
*start, /* Start of value */
quote; /* Quote character */
ipp_tag_t value_tag; /* Value tag for this attribute */
return;
}
+ /*
+ * Copy the value string so we can do what we want with it...
+ */
+
+ if ((temp = strdup(value)) == NULL)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Unable to duplicate value for \"%s\" attribute.", name);
+ return;
+ }
+
/*
* Count the number of values...
*/
- for (count = 1, quote = '\0', ptr = value;
+ for (count = 1, quote = '\0', ptr = temp;
*ptr;
ptr ++)
{
if (!attr)
{
+ free(temp);
cupsdLogMessage(CUPSD_LOG_ERROR,
"Unable to allocate memory for printer attribute "
"(%d values)", count);
return;
}
- for (i = 0; i < count; i ++)
+ for (i = 0, start = temp; i < count; i ++)
{
- if ((ptr = strchr(value, ',')) != NULL)
+ if ((ptr = strchr(start, ',')) != NULL)
*ptr++ = '\0';
- attr->values[i].integer = strtol(value, NULL, 10);
+ attr->values[i].integer = strtol(start, NULL, 10);
if (ptr)
- value = ptr;
+ start = ptr;
}
}
else
if (!attr)
{
+ free(temp);
cupsdLogMessage(CUPSD_LOG_ERROR,
"Unable to allocate memory for printer attribute "
"(%d values)", count);
return;
}
- for (i = 0, quote = '\0', ptr = value; i < count; i ++)
+ for (i = 0, quote = '\0', ptr = temp; i < count; i ++)
{
for (start = ptr; *ptr; ptr ++)
{
attr->values[i].string.text = _cupsStrAlloc(start);
}
}
+
+ free(temp);
+
+ /*
+ * Update the printer-supply and printer-supply-description, as needed...
+ */
+
+ if (!strcmp(name, "marker-names"))
+ {
+ ipp_attribute_t *supply_desc = ippFindAttribute(p->attrs, "printer-supply-description", IPP_TAG_TEXT);
+ /* printer-supply-description attribute */
+
+ if (supply_desc != NULL)
+ ippDeleteAttribute(p->attrs, supply_desc);
+
+ supply_desc = ippCopyAttribute(p->attrs, attr, 0);
+ ippSetName(p->attrs, &supply_desc, "printer-supply-description");
+ ippSetValueTag(p->attrs, &supply_desc, IPP_TAG_TEXT);
+ }
+ else if (!strcmp(name, "marker-colors") || !strcmp(name, "marker-levels") || !strcmp(name, "marker-types"))
+ {
+ char buffer[256], /* printer-supply values */
+ pstype[64], /* printer-supply type value */
+ *psptr; /* Pointer into type */
+ const char *color, /* marker-colors value */
+ *type; /* marker-types value */
+ int level; /* marker-levels value */
+ ipp_attribute_t *colors = ippFindAttribute(p->attrs, "marker-colors", IPP_TAG_NAME);
+ /* marker-colors attribute */
+ ipp_attribute_t *levels = ippFindAttribute(p->attrs, "marker-levels", IPP_TAG_INTEGER);
+ /* marker-levels attribute */
+ ipp_attribute_t *types = ippFindAttribute(p->attrs, "marker-types", IPP_TAG_KEYWORD);
+ /* marker-types attribute */
+ ipp_attribute_t *supply = ippFindAttribute(p->attrs, "printer-supply", IPP_TAG_STRING);
+ /* printer-supply attribute */
+
+ if (supply != NULL)
+ {
+ ippDeleteAttribute(p->attrs, supply);
+ supply = NULL;
+ }
+
+ if (!colors || !levels || !types)
+ return;
+
+ count = ippGetCount(colors);
+ if (count != ippGetCount(levels) || count != ippGetCount(types))
+ return;
+
+ for (i = 0; i < count; i ++)
+ {
+ color = ippGetString(colors, i, NULL);
+ level = ippGetInteger(levels, i);
+ type = ippGetString(types, i, NULL);
+
+ for (psptr = pstype; *type && psptr < (pstype + sizeof(pstype) - 1); type ++)
+ if (*type == '-')
+ {
+ type ++;
+ *psptr++ = (char)toupper(*type & 255);
+ }
+ else
+ *psptr++ = *type;
+ *psptr = '\0';
+
+ snprintf(buffer, sizeof(buffer), "index=%d;class=%s;type=%s;unit=percent;maxcapacity=100;level=%d;colorantname=%s;", i + 1, strncmp(pstype, "waste", 5) ? "supplyThatIsConsumed" : "receptacleThatIsFilled", pstype, level, color);
+
+ if (!i)
+ supply = ippAddOctetString(p->attrs, IPP_TAG_PRINTER, "printer-supply", buffer, (int)strlen(buffer));
+ else
+ ippSetOctetString(p->attrs, &supply, i, buffer, (int)strlen(buffer));
+ }
+ }
}
{
int i; /* Looping var */
char resource[HTTP_MAX_URI]; /* Resource portion of URI */
- int num_air; /* Number of auth-info-required values */
- const char * const *air; /* auth-info-required values */
cupsd_location_t *auth; /* Pointer to authentication element */
const char *auth_supported; /* Authentication supported */
ipp_t *oldattrs; /* Old printer attributes */
ipp_attribute_t *attr; /* Attribute data */
char *name, /* Current user/group name */
*filter; /* Current filter */
- static const char * const air_none[] =
- { /* No authentication */
- "none"
- };
- static const char * const air_userpass[] =
- { /* Basic/Digest authentication */
- "username",
- "password"
- };
DEBUG_printf(("cupsdSetPrinterAttrs: entering name = %s, type = %x\n", p->name,
*/
auth_supported = "requesting-user-name";
- num_air = 1;
- air = air_none;
-
- if (p->num_auth_info_required > 0 && strcmp(p->auth_info_required[0], "none"))
- {
- num_air = p->num_auth_info_required;
- air = p->auth_info_required;
- }
- else if (p->type & CUPS_PRINTER_AUTHENTICATED)
- {
- num_air = 2;
- air = air_userpass;
- }
if (p->type & CUPS_PRINTER_CLASS)
snprintf(resource, sizeof(resource), "/classes/%s", p->name);
if ((auth_type = auth->type) == CUPSD_AUTH_DEFAULT)
auth_type = cupsdDefaultAuthType();
- if (auth_type == CUPSD_AUTH_BASIC || auth_type == CUPSD_AUTH_BASICDIGEST)
+ if (auth_type == CUPSD_AUTH_BASIC)
auth_supported = "basic";
- else if (auth_type == CUPSD_AUTH_DIGEST)
- auth_supported = "digest";
#ifdef HAVE_GSSAPI
else if (auth_type == CUPSD_AUTH_NEGOTIATE)
auth_supported = "negotiate";
if (auth_type != CUPSD_AUTH_NONE)
p->type |= CUPS_PRINTER_AUTHENTICATED;
else
- p->type &= ~CUPS_PRINTER_AUTHENTICATED;
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_AUTHENTICATED;
}
else
- p->type &= ~CUPS_PRINTER_AUTHENTICATED;
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_AUTHENTICATED;
/*
* Create the required IPP attributes for a printer...
p->name);
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-location",
NULL, p->location ? p->location : "");
+ if (p->geo_location)
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "printer-geo-location", NULL, p->geo_location);
+ else
+ ippAddOutOfBand(p->attrs, IPP_TAG_PRINTER, IPP_TAG_UNKNOWN, "printer-geo-location");
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-info",
NULL, p->info ? p->info : "");
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "printer-uuid", NULL,
- p->uuid);
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-organization", NULL, p->organization ? p->organization : "");
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-organizational-unit", NULL, p->organizational_unit ? p->organizational_unit : "");
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "printer-uuid", NULL, p->uuid);
if (cupsArrayCount(p->users) > 0)
{
for (i = 0, name = (char *)cupsArrayFirst(p->users);
name;
i ++, name = (char *)cupsArrayNext(p->users))
- attr->values[i].string.text = _cupsStrRetain(name);
+ attr->values[i].string.text = _cupsStrAlloc(name);
}
ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"job-k-limit", p->k_limit);
ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"job-page-limit", p->page_limit);
- ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "auth-info-required", num_air, NULL, air);
+ if (p->num_auth_info_required > 0 && strcmp(p->auth_info_required[0], "none"))
+ ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
+ "auth-info-required", p->num_auth_info_required, NULL,
+ p->auth_info_required);
if (cupsArrayCount(Banners) > 0)
{
if (p->type & CUPS_PRINTER_CLASS)
{
p->raw = 1;
- p->type &= ~CUPS_PRINTER_OPTIONS;
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_OPTIONS;
/*
* Add class-specific attributes...
for (i = 0; i < p->num_printers; i ++)
{
if (attr != NULL)
- attr->values[i].string.text = _cupsStrRetain(p->printers[i]->name);
+ attr->values[i].string.text = _cupsStrAlloc(p->printers[i]->name);
- p->type &= ~CUPS_PRINTER_OPTIONS | p->printers[i]->type;
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_OPTIONS | p->printers[i]->type;
}
}
}
{
for (i = 0; i < oldattr->num_values; i ++)
attr->values[i].string.text =
- _cupsStrRetain(oldattr->values[i].string.text);
+ _cupsStrAlloc(oldattr->values[i].string.text);
}
}
{
for (i = 0; i < oldattr->num_values; i ++)
attr->values[i].string.text =
- _cupsStrRetain(oldattr->values[i].string.text);
+ _cupsStrAlloc(oldattr->values[i].string.text);
}
}
{
for (i = 0; i < oldattr->num_values; i ++)
attr->values[i].string.text =
- _cupsStrRetain(oldattr->values[i].string.text);
+ _cupsStrAlloc(oldattr->values[i].string.text);
}
}
add_printer_defaults(p);
-#ifdef __sgi
- /*
- * Write the IRIX printer config and status files...
- */
-
- write_irix_config(p);
- write_irix_state(p);
-#endif /* __sgi */
-
/*
* Let the browse protocols reflect the change
*/
_cupsStrFree(p->reasons[i]);
if (i < p->num_reasons)
- memmove(p->reasons + i, p->reasons + i + 1,
- (p->num_reasons - i) * sizeof(char *));
+ memmove(p->reasons + i, p->reasons + i + 1, (size_t)(p->num_reasons - i) * sizeof(char *));
if (!strcmp(reason, "paused") && p->state == IPP_PRINTER_STOPPED)
cupsdSetPrinterState(p, IPP_PRINTER_IDLE, 1);
+ if (!strcmp(reason, "cups-waiting-for-job-completed") && p->job)
+ p->job->completed = 0;
+
if (strcmp(reason, "connecting-to-device"))
dirty_printer(p);
+
break;
}
}
if (i >= p->num_reasons)
{
- if (!strncmp(reason, "cups-ipp-missing-", 17) ||
- !strncmp(reason, "cups-ipp-wrong-", 15))
- log_ipp_conformance(p, reason);
-
if (i >= (int)(sizeof(p->reasons) / sizeof(p->reasons[0])))
{
cupsdLogMessage(CUPSD_LOG_ALERT,
if (!strcmp(reason, "paused") && p->state != IPP_PRINTER_STOPPED)
cupsdSetPrinterState(p, IPP_PRINTER_STOPPED, 1);
+ if (!strcmp(reason, "cups-waiting-for-job-completed") && p->job)
+ p->job->completed = 1;
+
if (strcmp(reason, "connecting-to-device"))
dirty_printer(p);
}
*/
p->state_time = time(NULL);
-
-#ifdef __sgi
- write_irix_state(p);
-#endif /* __sgi */
}
/*
cupsd_printer_t *p; /* Current printer */
-#ifdef __sgi
- /*
- * Update the IRIX printer state for the default printer; if
- * no printers remain, then the default printer file will be
- * removed...
- */
-
- write_irix_state(DefaultPrinter);
-#endif /* __sgi */
-
/*
* See if we have a printcap file; if not, don't bother writing it.
*/
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-account-id-default"));
cupsArrayAdd(CommonDefaults,
_cupsStrAlloc("job-accounting-user-id-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-cancel-after-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-hold-until-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-priority-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-sheets-default"));
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_MIMETYPE,
"document-format-default", NULL, "application/octet-stream");
+ if (!cupsGetOption("job-cancel-after", p->num_options, p->options))
+ ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
+ "job-cancel-after-default", MaxJobTime);
+
if (!cupsGetOption("job-hold-until", p->num_options, p->options))
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"job-hold-until-default", NULL, "no-hold");
{
char *ptr; /* Pointer into maxsize(nnnn) program */
- maxsize = strtoll(program + 8, &ptr, 10);
+ maxsize = (size_t)strtoll(program + 8, &ptr, 10);
if (*ptr != ')')
{
filter;
filter = (mime_filter_t *)cupsArrayNext(MimeDatabase->filters))
{
- if (filter->dst == p->filetype && filter->filter &&
- strstr(filter->filter, "PrintJobMgr"))
+ if (filter->dst == p->filetype && strstr(filter->filter, "PrintJobMgr"))
break;
}
cupsdLogMessage(CUPSD_LOG_DEBUG, "load_ppd: Loading %s...", ppd_name);
- p->type &= ~CUPS_PRINTER_OPTIONS;
+ cupsdClearString(&(p->make_model));
+
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_OPTIONS;
p->type |= CUPS_PRINTER_BW;
finishings[0] = IPP_FINISHINGS_NONE;
if (ppd_attr->value && !_cups_strcasecmp(ppd_attr->value, "true"))
p->type |= CUPS_PRINTER_FAX;
- ippAddBoolean(p->ppd_attrs, IPP_TAG_PRINTER, "color-supported",
- ppd->color_device);
+ ippAddBoolean(p->ppd_attrs, IPP_TAG_PRINTER, "color-supported", (char)ppd->color_device);
+
+ if (p->pc && p->pc->charge_info_uri)
+ ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_URI,
+ "printer-charge-info-uri", NULL, p->pc->charge_info_uri);
if (p->pc && p->pc->account_id)
ippAddBoolean(p->ppd_attrs, IPP_TAG_PRINTER, "job-account-id-supported",
ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"job-password-encryption-supported", NULL, "none");
ippAddInteger(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
- "job-password-supported", strlen(p->pc->password));
+ "job-password-supported", (int)strlen(p->pc->password));
}
if (ppd->throughput)
"pages-per-minute-color", 1);
}
+ if ((ppd_attr = ppdFindAttr(ppd, "1284DeviceId", NULL)) != NULL)
+ ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-device-id", NULL, ppd_attr->value);
+
num_qualities = 0;
if ((output_mode = ppdFindOption(ppd, "OutputMode")) != NULL)
for (i = p->pc->num_sizes, pwgsize = p->pc->sizes;
i > 0;
i --, pwgsize ++, val ++)
- val->string.text = _cupsStrRetain(pwgsize->map.pwg);
+ val->string.text = _cupsStrAlloc(pwgsize->map.pwg);
if (p->pc->custom_min_keyword)
{
- val->string.text = _cupsStrRetain(p->pc->custom_min_keyword);
+ val->string.text = _cupsStrAlloc(p->pc->custom_min_keyword);
val ++;
- val->string.text = _cupsStrRetain(p->pc->custom_max_keyword);
+ val->string.text = _cupsStrAlloc(p->pc->custom_max_keyword);
}
}
val = attr->values;
i > 0;
i --, pwgsource ++, val ++)
- val->string.text = _cupsStrRetain(pwgsource->pwg);
+ val->string.text = _cupsStrAlloc(pwgsource->pwg);
}
/*
val = attr->values;
i > 0;
i --, pwgtype ++, val ++)
- val->string.text = _cupsStrRetain(pwgtype->pwg);
+ val->string.text = _cupsStrAlloc(pwgtype->pwg);
}
/*
mandatory = (char *)cupsArrayFirst(p->pc->mandatory);
mandatory;
val ++, mandatory = (char *)cupsArrayNext(p->pc->mandatory))
- val->string.text = _cupsStrRetain(mandatory);
+ val->string.text = _cupsStrAlloc(mandatory);
}
/*
CGContextRef context; /* The CG context used for resizing */
snprintf(outPath, sizeof(outPath), "%s/%s.png", CacheDir, p->name);
- outUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault,
- (UInt8 *)outPath,
- strlen(outPath),
- FALSE);
- icnsFileUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault,
- (UInt8 *)ppd_attr->value,
- strlen(ppd_attr->value),
- FALSE);
+ outUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault, (UInt8 *)outPath, (CFIndex)strlen(outPath), FALSE);
+ icnsFileUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault, (UInt8 *)ppd_attr->value, (CFIndex)strlen(ppd_attr->value), FALSE);
if (outUrl && icnsFileUrl)
{
sourceRef = CGImageSourceCreateWithURL(icnsFileUrl, NULL);
if (sourceRef)
{
- for (i = 0; i < CGImageSourceGetCount(sourceRef); i ++)
+ for (i = 0; i < (int)CGImageSourceGetCount(sourceRef); i ++)
{
- imageRef = CGImageSourceCreateImageAtIndex(sourceRef, i, NULL);
+ imageRef = CGImageSourceCreateImageAtIndex(sourceRef, (size_t)i, NULL);
if (!imageRef)
continue;
pstatus = ppdLastError(&pline);
- cupsdLogMessage(CUPSD_LOG_ERROR, "PPD file for %s cannot be loaded!",
- p->name);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "PPD file for %s cannot be loaded.", p->name);
if (pstatus <= PPD_ALLOC_ERROR)
- cupsdLogMessage(CUPSD_LOG_ERROR, "%s", strerror(errno));
+ cupsdLogMessage(CUPSD_LOG_ERROR, "%s: %s", ppd_name, strerror(errno));
else
- cupsdLogMessage(CUPSD_LOG_ERROR, "%s on line %d.",
- ppdErrorString(pstatus), pline);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "%s on line %d of %s.", ppdErrorString(pstatus), pline, ppd_name);
cupsdLogMessage(CUPSD_LOG_INFO,
"Hint: Run \"cupstestppd %s\" and fix any errors.",
}
-/*
- * 'log_ipp_conformance()' - Log an IPP conformance issue with a printer.
- */
-
-static void
-log_ipp_conformance(
- cupsd_printer_t *p, /* I - Printer */
- const char *reason) /* I - Printer state reason */
-{
- const char *message; /* Message to log */
-#ifdef __APPLE__
- aslmsg aslm; /* Apple System Log message */
-#endif /* __APPLE__ */
-
-
- /*
- * Strip the leading "cups-ipp-" from the reason and create a log message for
- * it...
- */
-
- reason += 9;
- if (!strcmp(reason, "missing-cancel-job"))
- message = "Printer does not support REQUIRED Cancel-Job operation.";
- else if (!strcmp(reason, "missing-get-job-attributes"))
- message = "Printer does not support REQUIRED Get-Job-Attributes operation.";
- else if (!strcmp(reason, "missing-print-job"))
- message = "Printer does not support REQUIRED Print-Job operation.";
- else if (!strcmp(reason, "missing-validate-job"))
- message = "Printer does not support REQUIRED Validate-Job operation.";
- else if (!strcmp(reason, "missing-get-printer-attributes"))
- message = "Printer does not support REQUIRED Get-Printer-Attributes operation.";
- else if (!strcmp(reason, "missing-send-document"))
- message = "Printer supports Create-Job but not Send-Document operation.";
- else if (!strcmp(reason, "missing-job-history"))
- message = "Printer does not provide REQUIRED job history.";
- else if (!strcmp(reason, "missing-job-id"))
- message = "Printer does not provide REQUIRED job-id attribute.";
- else if (!strcmp(reason, "missing-job-state"))
- message = "Printer does not provide REQUIRED job-state attribute.";
- else if (!strcmp(reason, "missing-operations-supported"))
- message = "Printer does not provide REQUIRED operations-supported "
- "attribute.";
- else if (!strcmp(reason, "missing-printer-is-accepting-jobs"))
- message = "Printer does not provide REQUIRED printer-is-accepting-jobs "
- "attribute.";
- else if (!strcmp(reason, "missing-printer-state-reasons"))
- message = "Printer does not provide REQUIRED printer-state-reasons "
- "attribute.";
- else if (!strcmp(reason, "wrong-http-version"))
- message = "Printer does not use REQUIRED HTTP/1.1 transport.";
- else
- message = "Unknown IPP conformance failure.";
-
- cupsdLogMessage(CUPSD_LOG_WARN, "%s: %s", p->name, message);
-
-#ifdef __APPLE__
- /*
- * Report the failure information to Apple if the user opts into providing
- * feedback to Apple...
- */
-
- aslm = asl_new(ASL_TYPE_MSG);
- if (aslm)
- {
- asl_set(aslm, "com.apple.message.domain", "com.apple.printing.ipp.conformance");
- asl_set(aslm, "com.apple.message.domain_scope", "com.apple.printing.ipp.conformance");
- asl_set(aslm, "com.apple.message.signature", reason);
- asl_set(aslm, "com.apple.message.signature2",
- p->make_model ? p->make_model : "Unknown");
- asl_log(NULL, aslm, ASL_LEVEL_NOTICE, "%s: %s",
- p->make_model ? p->make_model : "Unknown", message);
- asl_free(aslm);
- }
-#endif /* __APPLE__ */
-}
-
-
/*
* 'new_media_col()' - Create a media-col collection value.
*/
}
-#ifdef __sgi
-/*
- * 'write_irix_config()' - Update the config files used by the IRIX
- * desktop tools.
- */
-
-static void
-write_irix_config(cupsd_printer_t *p) /* I - Printer to update */
-{
- char filename[1024]; /* Interface script filename */
- cups_file_t *fp; /* Interface script file */
- ipp_attribute_t *attr; /* Attribute data */
-
-
- /*
- * Add dummy interface and GUI scripts to fool SGI's "challenged" printing
- * tools. First the interface script that tells the tools what kind of
- * printer we have...
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/interface/%s", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePuts(fp, "#!/bin/sh\n");
-
- if ((attr = ippFindAttribute(p->attrs, "printer-make-and-model",
- IPP_TAG_TEXT)) != NULL)
- cupsFilePrintf(fp, "NAME=\"%s\"\n", attr->values[0].string.text);
- else if (p->type & CUPS_PRINTER_CLASS)
- cupsFilePuts(fp, "NAME=\"Printer Class\"\n");
- else
- cupsFilePuts(fp, "NAME=\"Remote Destination\"\n");
-
- if (p->type & CUPS_PRINTER_COLOR)
- cupsFilePuts(fp, "TYPE=ColorPostScript\n");
- else
- cupsFilePuts(fp, "TYPE=MonoPostScript\n");
-
- cupsFilePrintf(fp, "HOSTNAME=%s\n", ServerName);
- cupsFilePrintf(fp, "HOSTPRINTER=%s\n", p->name);
-
- cupsFileClose(fp);
-
- chmod(filename, 0755);
- chown(filename, User, Group);
- }
-
- /*
- * Then the member file that tells which device file the queue is connected
- * to... Networked printers use "/dev/null" in this file, so that's what
- * we use (the actual device URI can confuse some apps...)
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/member/%s", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePuts(fp, "/dev/null\n");
-
- cupsFileClose(fp);
-
- chmod(filename, 0644);
- chown(filename, User, Group);
- }
-
- /*
- * The gui_interface file is a script or program that launches a GUI
- * option panel for the printer, using options specified on the
- * command-line in the third argument. The option panel must send
- * any printing options to stdout on a single line when the user
- * accepts them, or nothing if the user cancels the dialog.
- *
- * The default options panel program is /usr/bin/glpoptions, from
- * the ESP Print Pro software. You can select another using the
- * PrintcapGUI option.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/gui_interface/ELF/%s.gui", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePuts(fp, "#!/bin/sh\n");
- cupsFilePrintf(fp, "%s -d %s -o \"$3\"\n", PrintcapGUI, p->name);
-
- cupsFileClose(fp);
-
- chmod(filename, 0755);
- chown(filename, User, Group);
- }
-
- /*
- * The POD config file is needed by the printstatus command to show
- * the printer location and device.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.config", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePrintf(fp, "Printer Class | %s\n",
- (p->type & CUPS_PRINTER_COLOR) ? "ColorPostScript" : "MonoPostScript");
- cupsFilePrintf(fp, "Printer Model | %s\n", p->make_model ? p->make_model : "");
- cupsFilePrintf(fp, "Location Code | %s\n", p->location ? p->location : "");
- cupsFilePrintf(fp, "Physical Location | %s\n", p->info ? p->info : "");
- cupsFilePrintf(fp, "Port Path | %s\n", p->device_uri);
- cupsFilePrintf(fp, "Config Path | /var/spool/lp/pod/%s.config\n", p->name);
- cupsFilePrintf(fp, "Active Status Path | /var/spool/lp/pod/%s.status\n", p->name);
- cupsFilePuts(fp, "Status Update Wait | 10 seconds\n");
-
- cupsFileClose(fp);
-
- chmod(filename, 0664);
- chown(filename, User, Group);
- }
-}
-
-
-/*
- * 'write_irix_state()' - Update the status files used by IRIX printing
- * desktop tools.
- */
-
-static void
-write_irix_state(cupsd_printer_t *p) /* I - Printer to update */
-{
- char filename[1024]; /* Interface script filename */
- cups_file_t *fp; /* Interface script file */
- int tag; /* Status tag value */
-
-
- if (p)
- {
- /*
- * The POD status file is needed for the printstatus window to
- * provide the current status of the printer.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.status", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePrintf(fp, "Operational Status | %s\n",
- (p->state == IPP_PRINTER_IDLE) ? "Idle" :
- (p->state == IPP_PRINTER_PROCESSING) ? "Busy" :
- "Faulted");
- cupsFilePrintf(fp, "Information | 01 00 00 | %s\n", CUPS_SVERSION);
- cupsFilePrintf(fp, "Information | 02 00 00 | Device URI: %s\n",
- p->device_uri);
- cupsFilePrintf(fp, "Information | 03 00 00 | %s jobs\n",
- p->accepting ? "Accepting" : "Not accepting");
- cupsFilePrintf(fp, "Information | 04 00 00 | %s\n", p->state_message);
-
- cupsFileClose(fp);
-
- chmod(filename, 0664);
- chown(filename, User, Group);
- }
-
- /*
- * The activeicons file is needed to provide desktop icons for printers:
- *
- * [ quoted from /usr/lib/print/tagit ]
- *
- * --- Type of printer tags (base values)
- *
- * Dumb=66048 # 0x10200
- * DumbColor=66080 # 0x10220
- * Raster=66112 # 0x10240
- * ColorRaster=66144 # 0x10260
- * Plotter=66176 # 0x10280
- * PostScript=66208 # 0x102A0
- * ColorPostScript=66240 # 0x102C0
- * MonoPostScript=66272 # 0x102E0
- *
- * --- Printer state modifiers for local printers
- *
- * Idle=0 # 0x0
- * Busy=1 # 0x1
- * Faulted=2 # 0x2
- * Unknown=3 # 0x3 (Faulted due to unknown reason)
- *
- * --- Printer state modifiers for network printers
- *
- * NetIdle=8 # 0x8
- * NetBusy=9 # 0x9
- * NetFaulted=10 # 0xA
- * NetUnknown=11 # 0xB (Faulted due to unknown reason)
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/activeicons/%s", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- if (p->type & CUPS_PRINTER_COLOR)
- tag = 66240;
- else
- tag = 66272;
-
- if (p->type & CUPS_PRINTER_REMOTE)
- tag |= 8;
-
- if (p->state == IPP_PRINTER_PROCESSING)
- tag |= 1;
-
- else if (p->state == IPP_PRINTER_STOPPED)
- tag |= 2;
-
- cupsFilePuts(fp, "#!/bin/sh\n");
- cupsFilePrintf(fp, "#Tag %d\n", tag);
-
- cupsFileClose(fp);
-
- chmod(filename, 0755);
- chown(filename, User, Group);
- }
- }
-
- /*
- * The default file is needed by the printers window to show
- * the default printer.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/default");
-
- if (DefaultPrinter != NULL)
- {
- if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePrintf(fp, "%s\n", DefaultPrinter->name);
-
- cupsFileClose(fp);
-
- chmod(filename, 0644);
- chown(filename, User, Group);
- }
- }
- else
- unlink(filename);
-}
-#endif /* __sgi */
-
-
/*
* 'write_xml_string()' - Write a string with XML escaping.
*/
if (*s == '&')
{
if (s > start)
- cupsFileWrite(fp, start, s - start);
+ cupsFileWrite(fp, start, (size_t)(s - start));
cupsFilePuts(fp, "&");
start = s + 1;
else if (*s == '<')
{
if (s > start)
- cupsFileWrite(fp, start, s - start);
+ cupsFileWrite(fp, start, (size_t)(s - start));
cupsFilePuts(fp, "<");
start = s + 1;
/*
- * End of "$Id: printers.c 7968 2008-09-19 23:03:01Z mike $".
+ * End of "$Id$".
*/
projects / thirdparty / cups.git / blobdiff