-# Makefile template for Configure for the sim library.
-# Copyright (C) 1993, 1995, 1997, 1998, 2007, 2008
-# Free Software Foundation, Inc.
-# Written by Cygnus Support.
-#
-# This file is part of BFD, the Binary File Descriptor library.
-#
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright (C) 1993-2021 Free Software Foundation, Inc.
+#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-srcdir = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-host_alias = @host_alias@
-target_alias = @target_alias@
-program_transform_name = @program_transform_name@
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(libdir)/$(target_alias)
-
-datadir = @datadir@
-mandir = @mandir@
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
-infodir = @infodir@
-includedir = @includedir@
+# The IGEN simulator generator for GDB, the GNU Debugger.
+#
+# Copyright 2002-2021 Free Software Foundation, Inc.
+#
+# Contributed by Andrew Cagney.
+#
+# This file is part of GDB.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-SHELL = @SHELL@
+#
+# Copyright (C) 1997-2021 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
+# Copyright (C) 1997-2021 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+check_PROGRAMS = $(am__EXEEXT_3)
+EXTRA_PROGRAMS = $(am__EXEEXT_2) testsuite/common/bits-gen$(EXEEXT) \
+ testsuite/common/fpu-tst$(EXEEXT)
+@SIM_ENABLE_IGEN_TRUE@am__append_1 = igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@am__append_2 = $(igen_IGEN_TOOLS)
+@SIM_ENABLE_IGEN_TRUE@am__append_3 = $(igen_IGEN_TOOLS)
+TESTS = testsuite/common/bits32m0$(EXEEXT) \
+ testsuite/common/bits32m31$(EXEEXT) \
+ testsuite/common/bits64m0$(EXEEXT) \
+ testsuite/common/bits64m63$(EXEEXT) \
+ testsuite/common/alu-tst$(EXEEXT)
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
+ $(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/m4/sim_ac_toolchain.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo " AR " $@;
+am__v_AR_1 =
+igen_libigen_a_AR = $(AR) $(ARFLAGS)
+igen_libigen_a_LIBADD =
+am__dirstamp = $(am__leading_dot)dirstamp
+@SIM_ENABLE_IGEN_TRUE@am_igen_libigen_a_OBJECTS = \
+@SIM_ENABLE_IGEN_TRUE@ igen/table.$(OBJEXT) igen/lf.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/misc.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/filter_host.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/filter.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-model.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-itable.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-icache.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-semantics.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-idecode.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-support.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-engine.$(OBJEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen.$(OBJEXT)
+igen_libigen_a_OBJECTS = $(am_igen_libigen_a_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@am__EXEEXT_1 = igen/igen$(EXEEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/filter$(EXEEXT) igen/gen$(EXEEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache$(EXEEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode$(EXEEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn$(EXEEXT) \
+@SIM_ENABLE_IGEN_TRUE@ igen/table$(EXEEXT)
+@SIM_ENABLE_IGEN_TRUE@am__EXEEXT_2 = $(am__EXEEXT_1)
+am__EXEEXT_3 = testsuite/common/bits32m0$(EXEEXT) \
+ testsuite/common/bits32m31$(EXEEXT) \
+ testsuite/common/bits64m0$(EXEEXT) \
+ testsuite/common/bits64m63$(EXEEXT) \
+ testsuite/common/alu-tst$(EXEEXT)
+am_igen_filter_OBJECTS =
+igen_filter_OBJECTS = $(am_igen_filter_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@igen_filter_DEPENDENCIES = igen/filter-main.o \
+@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
+am_igen_gen_OBJECTS =
+igen_gen_OBJECTS = $(am_igen_gen_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@igen_gen_DEPENDENCIES = igen/gen-main.o \
+@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@am_igen_igen_OBJECTS = igen/igen.$(OBJEXT)
+igen_igen_OBJECTS = $(am_igen_igen_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@igen_igen_DEPENDENCIES = igen/libigen.a
+am_igen_ld_cache_OBJECTS =
+igen_ld_cache_OBJECTS = $(am_igen_ld_cache_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_DEPENDENCIES = \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache-main.o igen/libigen.a
+am_igen_ld_decode_OBJECTS =
+igen_ld_decode_OBJECTS = $(am_igen_ld_decode_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_DEPENDENCIES = \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode-main.o igen/libigen.a
+am_igen_ld_insn_OBJECTS =
+igen_ld_insn_OBJECTS = $(am_igen_ld_insn_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_DEPENDENCIES = igen/ld-insn-main.o \
+@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
+am_igen_table_OBJECTS =
+igen_table_OBJECTS = $(am_igen_table_OBJECTS)
+@SIM_ENABLE_IGEN_TRUE@igen_table_DEPENDENCIES = igen/table-main.o \
+@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
+testsuite_common_alu_tst_SOURCES = testsuite/common/alu-tst.c
+testsuite_common_alu_tst_OBJECTS = testsuite/common/alu-tst.$(OBJEXT)
+testsuite_common_alu_tst_LDADD = $(LDADD)
+testsuite_common_bits_gen_SOURCES = testsuite/common/bits-gen.c
+testsuite_common_bits_gen_OBJECTS = \
+ testsuite/common/bits-gen.$(OBJEXT)
+testsuite_common_bits_gen_LDADD = $(LDADD)
+testsuite_common_bits32m0_SOURCES = testsuite/common/bits32m0.c
+testsuite_common_bits32m0_OBJECTS = \
+ testsuite/common/bits32m0.$(OBJEXT)
+testsuite_common_bits32m0_LDADD = $(LDADD)
+testsuite_common_bits32m31_SOURCES = testsuite/common/bits32m31.c
+testsuite_common_bits32m31_OBJECTS = \
+ testsuite/common/bits32m31.$(OBJEXT)
+testsuite_common_bits32m31_LDADD = $(LDADD)
+testsuite_common_bits64m0_SOURCES = testsuite/common/bits64m0.c
+testsuite_common_bits64m0_OBJECTS = \
+ testsuite/common/bits64m0.$(OBJEXT)
+testsuite_common_bits64m0_LDADD = $(LDADD)
+testsuite_common_bits64m63_SOURCES = testsuite/common/bits64m63.c
+testsuite_common_bits64m63_OBJECTS = \
+ testsuite/common/bits64m63.$(OBJEXT)
+testsuite_common_bits64m63_LDADD = $(LDADD)
+testsuite_common_fpu_tst_SOURCES = testsuite/common/fpu-tst.c
+testsuite_common_fpu_tst_OBJECTS = testsuite/common/fpu-tst.$(OBJEXT)
+testsuite_common_fpu_tst_LDADD = $(LDADD)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/../depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(igen_libigen_a_SOURCES) $(igen_filter_SOURCES) \
+ $(igen_gen_SOURCES) $(igen_igen_SOURCES) \
+ $(igen_ld_cache_SOURCES) $(igen_ld_decode_SOURCES) \
+ $(igen_ld_insn_SOURCES) $(igen_table_SOURCES) \
+ testsuite/common/alu-tst.c testsuite/common/bits-gen.c \
+ testsuite/common/bits32m0.c testsuite/common/bits32m31.c \
+ testsuite/common/bits64m0.c testsuite/common/bits64m63.c \
+ testsuite/common/fpu-tst.c
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope check recheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DEJATOOL = $(PACKAGE)
+RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
+EXPECT = expect
+RUNTEST = runtest
+am__tty_colors_dummy = \
+ mgn= red= grn= lgn= blu= brg= std=; \
+ am__color_tests=no
+am__tty_colors = { \
+ $(am__tty_colors_dummy); \
+ if test "X$(AM_COLOR_TESTS)" = Xno; then \
+ am__color_tests=no; \
+ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+ am__color_tests=yes; \
+ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+ am__color_tests=yes; \
+ fi; \
+ if test $$am__color_tests = yes; then \
+ red='\e[0;31m'; \
+ grn='\e[0;32m'; \
+ lgn='\e[1;32m'; \
+ blu='\e[1;34m'; \
+ mgn='\e[0;35m'; \
+ brg='\e[1m'; \
+ std='\e[m'; \
+ fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__recheck_rx = ^[ ]*:recheck:[ ]*
+am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
+am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+ recheck = 1; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ { \
+ if ((getline line2 < ($$0 ".log")) < 0) \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+ { \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+ { \
+ break; \
+ } \
+ }; \
+ if (recheck) \
+ print $$0; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+ print "fatal: making $@: " msg | "cat >&2"; \
+ exit 1; \
+} \
+function rst_section(header) \
+{ \
+ print header; \
+ len = length(header); \
+ for (i = 1; i <= len; i = i + 1) \
+ printf "="; \
+ printf "\n\n"; \
+} \
+{ \
+ copy_in_global_log = 1; \
+ global_test_result = "RUN"; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".trs"); \
+ if (line ~ /$(am__global_test_result_rx)/) \
+ { \
+ sub("$(am__global_test_result_rx)", "", line); \
+ sub("[ ]*$$", "", line); \
+ global_test_result = line; \
+ } \
+ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+ copy_in_global_log = 0; \
+ }; \
+ if (copy_in_global_log) \
+ { \
+ rst_section(global_test_result ": " $$0); \
+ while ((rc = (getline line < ($$0 ".log"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".log"); \
+ print line; \
+ }; \
+ printf "\n"; \
+ }; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+ --color-tests "$$am__color_tests" \
+ --enable-hard-errors "$$am__enable_hard_errors" \
+ --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test. Creates the
+# directory for the log if needed. Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log. Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup); \
+$(am__vpath_adj_setup) $(am__vpath_adj) \
+$(am__tty_colors); \
+srcdir=$(srcdir); export srcdir; \
+case "$@" in \
+ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
+ *) am__odir=.;; \
+esac; \
+test "x$$am__odir" = x"." || test -d "$$am__odir" \
+ || $(MKDIR_P) "$$am__odir" || exit $$?; \
+if test -f "./$$f"; then dir=./; \
+elif test -f "$$f"; then dir=; \
+else dir="$(srcdir)/"; fi; \
+tst=$$dir$$f; log='$@'; \
+if test -n '$(DISABLE_HARD_ERRORS)'; then \
+ am__enable_hard_errors=no; \
+else \
+ am__enable_hard_errors=yes; \
+fi; \
+case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
+ am__expect_failure=yes;; \
+ *) \
+ am__expect_failure=no;; \
+esac; \
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed). The result is saved in the shell variable
+# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+ bases='$(TEST_LOGS)'; \
+ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+ bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+ case '$@' in \
+ */*) \
+ case '$*' in \
+ */*) b='$*';; \
+ *) b=`echo '$@' | sed 's/\.log$$//'`; \
+ esac;; \
+ *) \
+ b='$*';; \
+ esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+ $(TEST_LOG_FLAGS)
+DIST_SUBDIRS = $(SUBDIRS)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
-AR_FLAGS = rc
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
CC = @CC@
-CFLAGS = @CFLAGS@
+CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
-MAKEINFO = makeinfo
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+C_DIALECT = @C_DIALECT@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
-
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIM_PRIMARY_TARGET = @SIM_PRIMARY_TARGET@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = dejagnu foreign no-dist subdir-objects
+ACLOCAL_AMFLAGS = -Im4 -I.. -I../config
+srcroot = $(srcdir)/..
SUBDIRS = @subdirs@
+AM_MAKEFLAGS = SIM_PRIMARY_TARGET=$(SIM_PRIMARY_TARGET)
+noinst_LIBRARIES = $(am__append_1)
+CLEANFILES = testsuite/common/bits-gen testsuite/common/bits32m0.c \
+ testsuite/common/bits32m31.c testsuite/common/bits64m0.c \
+ testsuite/common/bits64m63.c
+DISTCLEANFILES =
+MOSTLYCLEANFILES = core $(am__append_3) site-srcdir.exp testrun.log \
+ testrun.sum
+COMPILE_FOR_BUILD = $(CC_FOR_BUILD) $(AM_CPPFLAGS) $(CFLAGS_FOR_BUILD)
+LINK_FOR_BUILD = $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@
+@SIM_ENABLE_IGEN_TRUE@igen_libigen_a_SOURCES = \
+@SIM_ENABLE_IGEN_TRUE@ igen/table.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/lf.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/misc.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/filter_host.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/filter.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-model.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-itable.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-icache.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-semantics.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-idecode.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-support.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen-engine.c \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen.c
-INCDIR = $(srcdir)/../include
-CSEARCH = -I. -I$(srcdir) -I$(INCDIR)
-DEP = mkdep
-
-#### Makefile fragments come in here.
-# @target_makefile_frag@
-###
-
-# Name of the ChangeLog file.
-ChangeLog = ChangeLog
-
-
-RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
- echo $${srcdir}/../dejagnu/runtest ; else echo runtest; \
- fi`
-RUNTESTFLAGS=
-
-FLAGS_TO_PASS = \
- "prefix=$(prefix)" \
- "exec_prefix=$(exec_prefix)" \
- "bindir=$(bindir)" \
- "mandir=$(mandir)" \
- "libdir=$(libdir)" \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
- "CFLAGS=$(CFLAGS)" \
- "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
- "RANLIB=$(RANLIB)" \
- "MAKEINFO=$(MAKEINFO)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "RUNTEST=$(RUNTEST)" \
- "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
- "SHELL=$(SHELL)"
-
-# The use of $$(x_FOR_TARGET) reduces the command line length by not
-# duplicating the lengthy definition.
-TARGET_FLAGS_TO_PASS = \
- "prefix=$(prefix)" \
- "exec_prefix=$(exec_prefix)" \
- "against=$(against)" \
- 'CC=$$(CC_FOR_TARGET)' \
- "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
- "CFLAGS=$(CFLAGS)" \
- "CHILLFLAGS=$(CHILLFLAGS)" \
- 'CHILL=$$(CHILL_FOR_TARGET)' \
- "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
- "CHILL_LIB=$(CHILL_LIB)" \
- 'CXX=$$(CXX_FOR_TARGET)' \
- "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
- "CXXFLAGS=$(CXXFLAGS)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "MAKEINFO=$(MAKEINFO)" \
- "RUNTEST=$(RUNTEST)" \
- "RUNTESTFLAGS=$(RUNTESTFLAGS)"
-
-
-all:
- @rootme=`pwd` ; export rootme ; \
- for dir in . `echo ${SUBDIRS} | sed 's/testsuite//'` ; do \
- if [ "$$dir" = "." ]; then \
- true; \
- elif [ -d $$dir ]; then \
- (cd $$dir; $(MAKE) $(FLAGS_TO_PASS)) || exit 1; \
- else true; fi; \
- done
+@SIM_ENABLE_IGEN_TRUE@igen_igen_SOURCES = igen/igen.c
+@SIM_ENABLE_IGEN_TRUE@igen_igen_LDADD = igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@igen_filter_SOURCES =
+@SIM_ENABLE_IGEN_TRUE@igen_filter_LDADD = igen/filter-main.o igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@igen_gen_SOURCES =
+@SIM_ENABLE_IGEN_TRUE@igen_gen_LDADD = igen/gen-main.o igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_SOURCES =
+@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_LDADD = igen/ld-cache-main.o igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_SOURCES =
+@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_LDADD = igen/ld-decode-main.o igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_SOURCES =
+@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_LDADD = igen/ld-insn-main.o igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@igen_table_SOURCES =
+@SIM_ENABLE_IGEN_TRUE@igen_table_LDADD = igen/table-main.o igen/libigen.a
+@SIM_ENABLE_IGEN_TRUE@igen_IGEN_TOOLS = \
+@SIM_ENABLE_IGEN_TRUE@ igen/igen \
+@SIM_ENABLE_IGEN_TRUE@ igen/filter \
+@SIM_ENABLE_IGEN_TRUE@ igen/gen \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode \
+@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn \
+@SIM_ENABLE_IGEN_TRUE@ igen/table
-clean mostlyclean:
- @rootme=`pwd` ; export rootme ; \
- for dir in . ${SUBDIRS}; do \
- if [ "$$dir" = "." ]; then \
- true; \
- elif [ -d $$dir ]; then \
- (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) $@) || exit 1; \
- else true; fi; \
- done
-distclean maintainer-clean realclean:
- @rootme=`pwd` ; export rootme ; \
- for dir in . ${SUBDIRS}; do \
- if [ "$$dir" = "." ]; then \
- true; \
- elif [ -d $$dir ]; then \
- (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) $@) || exit 1; \
- else true; fi; \
- done
- rm -f Makefile config.cache config.log config.status
-
-install:
- @rootme=`pwd` ; export rootme ; \
- for dir in . ${SUBDIRS}; do \
- if [ "$$dir" = "." ]; then \
- true; \
- elif [ -d $$dir ]; then \
- (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) install) || exit 1; \
- else true; fi; \
- done
+# Tweak the site.exp so it works with plain `runtest` from user.
+EXTRA_DEJAGNU_SITE_CONFIG = site-srcdir.exp
+testsuite_common_CPPFLAGS = \
+ -I$(srcdir)/common \
+ -I$(srcroot)/include
-installcheck:
- @echo No installcheck target is available yet for the GNU simulators.
+all: all-recursive
-installcheck:
+.SUFFIXES:
+.SUFFIXES: .c .log .o .obj .test .test$(EXEEXT) .trs
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/igen/local.mk $(srcdir)/testsuite/local.mk $(srcdir)/testsuite/common/local.mk $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+$(srcdir)/igen/local.mk $(srcdir)/testsuite/local.mk $(srcdir)/testsuite/common/local.mk $(am__empty):
-# The check target can not use subdir_do, because subdir_do does not
-# use TARGET_FLAGS_TO_PASS.
-check: force
- @if [ -f testsuite/Makefile ]; then \
- rootme=`pwd`; export rootme; \
- rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
- cd testsuite; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
- else true; fi
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+igen/$(am__dirstamp):
+ @$(MKDIR_P) igen
+ @: > igen/$(am__dirstamp)
+igen/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) igen/$(DEPDIR)
+ @: > igen/$(DEPDIR)/$(am__dirstamp)
+igen/table.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/lf.$(OBJEXT): igen/$(am__dirstamp) igen/$(DEPDIR)/$(am__dirstamp)
+igen/misc.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/filter_host.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/ld-decode.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/ld-cache.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/filter.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/ld-insn.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen-model.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen-itable.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen-icache.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen-semantics.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen-idecode.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen-support.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen-engine.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
+igen/gen.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
-info:
-install-info:
-dvi:
-pdf:
+igen/libigen.a: $(igen_libigen_a_OBJECTS) $(igen_libigen_a_DEPENDENCIES) $(EXTRA_igen_libigen_a_DEPENDENCIES) igen/$(am__dirstamp)
+ $(AM_V_at)-rm -f igen/libigen.a
+ $(AM_V_AR)$(igen_libigen_a_AR) igen/libigen.a $(igen_libigen_a_OBJECTS) $(igen_libigen_a_LIBADD)
+ $(AM_V_at)$(RANLIB) igen/libigen.a
-###
-###
+clean-checkPROGRAMS:
+ -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
-.NOEXPORT:
-MAKEOVERRIDES=
+igen/filter$(EXEEXT): $(igen_filter_OBJECTS) $(igen_filter_DEPENDENCIES) $(EXTRA_igen_filter_DEPENDENCIES) igen/$(am__dirstamp)
+ @rm -f igen/filter$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(igen_filter_OBJECTS) $(igen_filter_LDADD) $(LIBS)
-.PHONY: check installcheck
-check:
-installcheck:
+igen/gen$(EXEEXT): $(igen_gen_OBJECTS) $(igen_gen_DEPENDENCIES) $(EXTRA_igen_gen_DEPENDENCIES) igen/$(am__dirstamp)
+ @rm -f igen/gen$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(igen_gen_OBJECTS) $(igen_gen_LDADD) $(LIBS)
+igen/igen.$(OBJEXT): igen/$(am__dirstamp) \
+ igen/$(DEPDIR)/$(am__dirstamp)
-TAGS:
+@SIM_ENABLE_IGEN_FALSE@igen/igen$(EXEEXT): $(igen_igen_OBJECTS) $(igen_igen_DEPENDENCIES) $(EXTRA_igen_igen_DEPENDENCIES) igen/$(am__dirstamp)
+@SIM_ENABLE_IGEN_FALSE@ @rm -f igen/igen$(EXEEXT)
+@SIM_ENABLE_IGEN_FALSE@ $(AM_V_CCLD)$(LINK) $(igen_igen_OBJECTS) $(igen_igen_LDADD) $(LIBS)
-force:
+igen/ld-cache$(EXEEXT): $(igen_ld_cache_OBJECTS) $(igen_ld_cache_DEPENDENCIES) $(EXTRA_igen_ld_cache_DEPENDENCIES) igen/$(am__dirstamp)
+ @rm -f igen/ld-cache$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(igen_ld_cache_OBJECTS) $(igen_ld_cache_LDADD) $(LIBS)
-Makefile: Makefile.in config.status
- $(SHELL) ./config.status
+igen/ld-decode$(EXEEXT): $(igen_ld_decode_OBJECTS) $(igen_ld_decode_DEPENDENCIES) $(EXTRA_igen_ld_decode_DEPENDENCIES) igen/$(am__dirstamp)
+ @rm -f igen/ld-decode$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(igen_ld_decode_OBJECTS) $(igen_ld_decode_LDADD) $(LIBS)
-config.status: configure
- $(SHELL) ./config.status --recheck
+igen/ld-insn$(EXEEXT): $(igen_ld_insn_OBJECTS) $(igen_ld_insn_DEPENDENCIES) $(EXTRA_igen_ld_insn_DEPENDENCIES) igen/$(am__dirstamp)
+ @rm -f igen/ld-insn$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(igen_ld_insn_OBJECTS) $(igen_ld_insn_LDADD) $(LIBS)
-# Utility to run autoconf in each directory that uses the common framework.
-# This is intended to be invoked in $srcdir as
-# "make -f Makefile.in autoconf-common SHELL=/bin/sh".
-.PHONY: autoconf-common autoheader-common
-autoconf-common autoheader-common:
- for d in * ; \
- do \
- if [ -d $$d -a -f $$d/configure.ac ] ; \
- then \
- echo "Running autoconf in $$d ..." ; \
- (cd $$d && autoconf --force) ; \
- if [ $@ = autoheader-common ] && [ -f $$d/config.in ] ; \
- then \
- echo "Running autoheader in $$d ..." ; \
- (cd $$d && autoheader --force) ; \
- fi ; \
- fi ; \
- done
+igen/table$(EXEEXT): $(igen_table_OBJECTS) $(igen_table_DEPENDENCIES) $(EXTRA_igen_table_DEPENDENCIES) igen/$(am__dirstamp)
+ @rm -f igen/table$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(igen_table_OBJECTS) $(igen_table_LDADD) $(LIBS)
+testsuite/common/$(am__dirstamp):
+ @$(MKDIR_P) testsuite/common
+ @: > testsuite/common/$(am__dirstamp)
+testsuite/common/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) testsuite/common/$(DEPDIR)
+ @: > testsuite/common/$(DEPDIR)/$(am__dirstamp)
+testsuite/common/alu-tst.$(OBJEXT): testsuite/common/$(am__dirstamp) \
+ testsuite/common/$(DEPDIR)/$(am__dirstamp)
+testsuite/common/bits-gen.$(OBJEXT): testsuite/common/$(am__dirstamp) \
+ testsuite/common/$(DEPDIR)/$(am__dirstamp)
+testsuite/common/bits32m0.$(OBJEXT): testsuite/common/$(am__dirstamp) \
+ testsuite/common/$(DEPDIR)/$(am__dirstamp)
+testsuite/common/bits32m31.$(OBJEXT): \
+ testsuite/common/$(am__dirstamp) \
+ testsuite/common/$(DEPDIR)/$(am__dirstamp)
+testsuite/common/bits64m0.$(OBJEXT): testsuite/common/$(am__dirstamp) \
+ testsuite/common/$(DEPDIR)/$(am__dirstamp)
+testsuite/common/bits64m63.$(OBJEXT): \
+ testsuite/common/$(am__dirstamp) \
+ testsuite/common/$(DEPDIR)/$(am__dirstamp)
+testsuite/common/fpu-tst.$(OBJEXT): testsuite/common/$(am__dirstamp) \
+ testsuite/common/$(DEPDIR)/$(am__dirstamp)
-autoconf-changelog autoheader-changelog:
- id=$(ID) ; \
- test x$$id = x && id="`id | sed -e 's/^[^(]*(\([^)]*\).*$$/\1/'`" ; \
- name=$(NAME) ; \
- test x$$name = x && name=`grep "^$$id:" /etc/passwd | cut -f 5 -d ':'` ; \
- host=$(HOST) ; \
- test x$$host = x && host="`hostname`" ; \
- date=$(DATE) ; \
- test x$$date = x && date="`date +%Y-%m-%d`" ; \
- echo "$$date $$name $$id@$$host" ; \
- for d in * ; \
- do \
- if [ -d $$d -a -f $$d/configure.ac ] ; \
- then \
- echo "Creating new-$(ChangeLog) in $$d ..." ; \
- ( echo "$$date $$name <$$id@$$host>" ; \
- echo "" ; \
- echo " * configure: Regenerated to track ../common/aclocal.m4 changes." ; \
- if [ $@ = autoheader-changelog ] ; \
- then \
- echo " * config.in: Ditto." ; \
- fi ; \
- echo "" ; \
- cat $$d/$(ChangeLog) \
- ) > $$d/new-$(ChangeLog) ; \
- fi ; \
- done
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+ -rm -f igen/*.$(OBJEXT)
+ -rm -f testsuite/common/*.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/filter.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/filter_host.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-engine.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-icache.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-idecode.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-itable.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-model.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-semantics.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-support.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/igen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-cache.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-decode.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-insn.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/lf.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/table.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/alu-tst.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits-gen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits32m0.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits32m31.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits64m0.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits64m63.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/fpu-tst.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
-autoconf-install autoheader-install:
- for d in * ; \
- do \
- if [ -d $$d -a -f $$d/configure.ac ] ; \
- then \
- echo "Moving $$d/new-$(ChangeLog) to $$d/$(ChangeLog) ..." ; \
- mv $$d/new-$(ChangeLog) $$d/$(ChangeLog) ; \
- fi ; \
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG)
+ @echo 'Making a new site.exp file ...'
+ @echo '## these variables are automatically generated by make ##' >site.tmp
+ @echo '# Do not edit here. If you wish to override these values' >>site.tmp
+ @echo '# edit the last section' >>site.tmp
+ @echo 'set srcdir "$(srcdir)"' >>site.tmp
+ @echo "set objdir `pwd`" >>site.tmp
+ @echo 'set build_alias "$(build_alias)"' >>site.tmp
+ @echo 'set build_triplet $(build_triplet)' >>site.tmp
+ @echo 'set host_alias "$(host_alias)"' >>site.tmp
+ @echo 'set host_triplet $(host_triplet)' >>site.tmp
+ @echo 'set target_alias "$(target_alias)"' >>site.tmp
+ @echo 'set target_triplet $(target_triplet)' >>site.tmp
+ @list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \
+ echo "## Begin content included from file $$f. Do not modify. ##" \
+ && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \
+ && echo "## End content included from file $$f. ##" \
+ || exit 1; \
+ done >> site.tmp
+ @echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp
+ @if test -f site.exp; then \
+ sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \
+ fi
+ @-rm -f site.bak
+ @test ! -f site.exp || mv site.exp site.bak
+ @mv site.tmp site.exp
+
+distclean-DEJAGNU:
+ -rm -f site.exp site.bak
+ -l='$(DEJATOOL)'; for tool in $$l; do \
+ rm -f $$tool.sum $$tool.log; \
done
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+ rm -f $< $@
+ $(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+ @:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+ @$(am__set_TESTS_bases); \
+ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+ redo_bases=`for i in $$bases; do \
+ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+ done`; \
+ if test -n "$$redo_bases"; then \
+ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+ if $(am__make_dryrun); then :; else \
+ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+ fi; \
+ fi; \
+ if test -n "$$am__remaking_logs"; then \
+ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+ "recursion detected" >&2; \
+ elif test -n "$$redo_logs"; then \
+ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+ fi; \
+ if $(am__make_dryrun); then :; else \
+ st=0; \
+ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+ for i in $$redo_bases; do \
+ test -f $$i.trs && test -r $$i.trs \
+ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+ test -f $$i.log && test -r $$i.log \
+ || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+ done; \
+ test $$st -eq 0 || exit 1; \
+ fi
+ @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+ ws='[ ]'; \
+ results=`for b in $$bases; do echo $$b.trs; done`; \
+ test -n "$$results" || results=/dev/null; \
+ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
+ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
+ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
+ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
+ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+ if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+ success=true; \
+ else \
+ success=false; \
+ fi; \
+ br='==================='; br=$$br$$br$$br$$br; \
+ result_count () \
+ { \
+ if test x"$$1" = x"--maybe-color"; then \
+ maybe_colorize=yes; \
+ elif test x"$$1" = x"--no-color"; then \
+ maybe_colorize=no; \
+ else \
+ echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+ fi; \
+ shift; \
+ desc=$$1 count=$$2; \
+ if test $$maybe_colorize = yes && test $$count -gt 0; then \
+ color_start=$$3 color_end=$$std; \
+ else \
+ color_start= color_end=; \
+ fi; \
+ echo "$${color_start}# $$desc $$count$${color_end}"; \
+ }; \
+ create_testsuite_report () \
+ { \
+ result_count $$1 "TOTAL:" $$all "$$brg"; \
+ result_count $$1 "PASS: " $$pass "$$grn"; \
+ result_count $$1 "SKIP: " $$skip "$$blu"; \
+ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+ result_count $$1 "FAIL: " $$fail "$$red"; \
+ result_count $$1 "XPASS:" $$xpass "$$red"; \
+ result_count $$1 "ERROR:" $$error "$$mgn"; \
+ }; \
+ { \
+ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
+ $(am__rst_title); \
+ create_testsuite_report --no-color; \
+ echo; \
+ echo ".. contents:: :depth: 2"; \
+ echo; \
+ for b in $$bases; do echo $$b; done \
+ | $(am__create_global_log); \
+ } >$(TEST_SUITE_LOG).tmp || exit 1; \
+ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
+ if $$success; then \
+ col="$$grn"; \
+ else \
+ col="$$red"; \
+ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
+ fi; \
+ echo "$${col}$$br$${std}"; \
+ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
+ echo "$${col}$$br$${std}"; \
+ create_testsuite_report --maybe-color; \
+ echo "$$col$$br$$std"; \
+ if $$success; then :; else \
+ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
+ fi; \
+ echo "$$col$$br$$std"; \
+ fi; \
+ $$success || exit 1
+
+check-TESTS:
+ @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
+ @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+ exit $$?;
+recheck: all $(check_PROGRAMS)
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ bases=`for i in $$bases; do echo $$i; done \
+ | $(am__list_recheck_tests)` || exit 1; \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ log_list=`echo $$log_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+ am__force_recheck=am--force-recheck \
+ TEST_LOGS="$$log_list"; \
+ exit $$?
+testsuite/common/bits32m0.log: testsuite/common/bits32m0$(EXEEXT)
+ @p='testsuite/common/bits32m0$(EXEEXT)'; \
+ b='testsuite/common/bits32m0'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+testsuite/common/bits32m31.log: testsuite/common/bits32m31$(EXEEXT)
+ @p='testsuite/common/bits32m31$(EXEEXT)'; \
+ b='testsuite/common/bits32m31'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+testsuite/common/bits64m0.log: testsuite/common/bits64m0$(EXEEXT)
+ @p='testsuite/common/bits64m0$(EXEEXT)'; \
+ b='testsuite/common/bits64m0'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+testsuite/common/bits64m63.log: testsuite/common/bits64m63$(EXEEXT)
+ @p='testsuite/common/bits64m63$(EXEEXT)'; \
+ b='testsuite/common/bits64m63'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+testsuite/common/alu-tst.log: testsuite/common/alu-tst$(EXEEXT)
+ @p='testsuite/common/alu-tst$(EXEEXT)'; \
+ b='testsuite/common/alu-tst'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+ @p='$<'; \
+ $(am__set_b); \
+ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@ @p='$<'; \
+@am__EXEEXT_TRUE@ $(am__set_b); \
+@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+ $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU check-TESTS
+check: check-recursive
+all-am: Makefile $(LIBRARIES)
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+ -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+ -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+ -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -rm -f igen/$(DEPDIR)/$(am__dirstamp)
+ -rm -f igen/$(am__dirstamp)
+ -rm -f testsuite/common/$(DEPDIR)/$(am__dirstamp)
+ -rm -f testsuite/common/$(am__dirstamp)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-checkPROGRAMS clean-generic clean-noinstLIBRARIES \
+ mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf igen/$(DEPDIR) testsuite/common/$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-DEJAGNU distclean-compile \
+ distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -rf igen/$(DEPDIR) testsuite/common/$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-DEJAGNU check-TESTS check-am clean \
+ clean-checkPROGRAMS clean-cscope clean-generic \
+ clean-noinstLIBRARIES cscope cscopelist-am ctags ctags-am \
+ distclean distclean-DEJAGNU distclean-compile \
+ distclean-generic distclean-tags dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am recheck tags tags-am \
+ uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Generate nltvals.def for newlib/libgloss using devo and build tree.
+# This file is shipped with distributions so we build in the source dir.
+# Use `make nltvals' to rebuild.
+# Note: If gdb releases begin to contain target header files (not a good idea,
+# but if they did ...), nltvals.def coud be generated at build time.
+# An alternative is to slurp in the tables at runtime.
+.PHONY: nltvals
+nltvals:
+ $(abs_srcdir)/common/gennltvals.py --cpp "$(CPP)" --output nltvals.def --srcroot $(srcroot)
+ $(SHELL) $(srcroot)/move-if-change nltvals.def $(abs_srcdir)/common/nltvals.def
+
+# This makes sure igen is available before building the arch-subdirs which
+# need to run the igen tool.
+@SIM_ENABLE_IGEN_TRUE@all-recursive: igen/igen$(EXEEXT)
+
+# Alias for developers.
+@SIM_ENABLE_IGEN_TRUE@igen: igen/igen$(EXEEXT)
+
+@SIM_ENABLE_IGEN_TRUE@igen/igen$(EXEEXT): $(igen_igen_OBJECTS) $(igen_igen_DEPENDENCIES) igen/$(am__dirstamp)
+@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(igen_igen_OBJECTS) $(igen_igen_LDADD)
+
+# igen is a build-time only tool. Override the default rules for it.
+@SIM_ENABLE_IGEN_TRUE@igen/%.o: igen/%.c
+@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
+
+# Build some of the files in standalone mode for developers of igen itself.
+@SIM_ENABLE_IGEN_TRUE@igen/%-main.o: igen/%.c
+@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -DMAIN -c $< -o $@
+
+site-srcdir.exp: Makefile
+ echo "set srcdir \"$(srcdir)/testsuite\"" > $@
+
+check-DEJAGNU: site.exp
+ LC_ALL=C; export LC_ALL; \
+ EXPECT=${EXPECT} ; export EXPECT ; \
+ runtest=$(RUNTEST); \
+ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ $$runtest $(RUNTESTFLAGS); \
+ else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+ fi
+
+# These tests are build-time only tools. Override the default rules for them.
+testsuite/common/%.o: testsuite/common/%.c
+ $(AM_V_CC)$(COMPILE_FOR_BUILD) $(testsuite_common_CPPFLAGS) -c $< -o $@
+
+testsuite/common/alu-tst$(EXEEXT): $(testsuite_common_alu_tst_OBJECTS) $(testsuite_common_alu_tst_DEPENDENCIES) testsuite/common/$(am__dirstamp)
+ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_alu_tst_OBJECTS) $(testsuite_common_alu_tst_LDADD)
+
+testsuite/common/fpu-tst$(EXEEXT): $(testsuite_common_fpu_tst_OBJECTS) $(testsuite_common_fpu_tst_DEPENDENCIES) testsuite/common/$(am__dirstamp)
+ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_fpu_tst_OBJECTS) $(testsuite_common_fpu_tst_LDADD)
+
+testsuite/common/bits-gen$(EXEEXT): $(testsuite_common_bits_gen_OBJECTS) $(testsuite_common_bits_gen_DEPENDENCIES) testsuite/common/$(am__dirstamp)
+ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits_gen_OBJECTS) $(testsuite_common_bits_gen_LDADD)
+
+testsuite/common/bits32m0$(EXEEXT): $(testsuite_common_bits32m0_OBJECTS) $(testsuite_common_bits32m0_DEPENDENCIES) testsuite/common/$(am__dirstamp)
+ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits32m0_OBJECTS) $(testsuite_common_bits32m0_LDADD)
+
+testsuite/common/bits32m0.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
+ $< 32 0 big > $@.tmp
+ cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
+ mv $@.tmp $@
+
+testsuite/common/bits32m31$(EXEEXT): $(testsuite_common_bits32m31_OBJECTS) $(testsuite_common_bits32m31_DEPENDENCIES) testsuite/common/$(am__dirstamp)
+ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits32m31_OBJECTS) $(testsuite_common_bits32m31_LDADD)
+
+testsuite/common/bits32m31.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
+ $< 32 31 little > $@.tmp
+ cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
+ mv $@.tmp $@
+
+testsuite/common/bits64m0$(EXEEXT): $(testsuite_common_bits64m0_OBJECTS) $(testsuite_common_bits64m0_DEPENDENCIES) testsuite/common/$(am__dirstamp)
+ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits64m0_OBJECTS) $(testsuite_common_bits64m0_LDADD)
+
+testsuite/common/bits64m0.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
+ $< 64 0 big > $@.tmp
+ cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
+ mv $@.tmp $@
+
+testsuite/common/bits64m63$(EXEEXT): $(testsuite_common_bits64m63_OBJECTS) $(testsuite_common_bits64m63_DEPENDENCIES) testsuite/common/$(am__dirstamp)
+ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits64m63_OBJECTS) $(testsuite_common_bits64m63_LDADD)
+
+testsuite/common/bits64m63.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
+ $< 64 63 little > $@.tmp
+ cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
+ mv $@.tmp $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: