+2015-04-18 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (SIM_CPU): Add note to clean this up.
+
+2015-04-18 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (sim_cia): Delete.
+
+2015-04-17 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (CIA_GET, CIA_SET): Delete.
+
+2015-04-15 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
+ * sim-main.h (STATE_CPU): Delete.
+
+2015-04-13 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-04-06 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
+
+2015-04-01 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
+
+2015-03-31 Mike Frysinger <vapier@gentoo.org>
+
+ * config.in, configure: Regenerate.
+
+2015-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-03-23 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-03-23 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+ * configure.ac (BFIN_SIM_EXTRA_OBJS): Delete.
+ * Makefile.in (SIM_OBJS): Delete @BFIN_SIM_EXTRA_OBJS@.
+
+2015-03-23 Mike Frysinger <vapier@gentoo.org>
+
+ * dv-bfin_uart.c [!HAVE_DV_SOCKSER] (dv_sockser_status,
+ dv_sockser_write, dv_sockser_read): Delete.
+
+2015-03-23 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h: Delete run-sim.h include.
+
+2015-03-16 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, config.in, configure: Regenerate.
+ * tconfig.in: Rename file ...
+ * tconfig.h: ... here.
+
+2015-03-15 Mike Frysinger <vapier@gentoo.org>
+
+ * tconfig.in: Delete includes.
+ [HAVE_DV_SOCKSER]: Delete.
+
+2015-03-14 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (decode_dsp32alu_0): Change v to bu32.
+
+2015-03-14 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_RUN_OBJS): Delete.
+
+2015-03-10 Mike Frysinger <vapier@gentoo.org>
+
+ PR sim/13160
+ * Makefile.in ($(srcdir)/linux-fixed-code.h): Put a ; after the
+ print sed command for BSD compatibility.
+
+2015-03-08 Mike Frysinger <vapier@gentoo.org>
+
+ PR sim/13160
+ * Makefile.in ($(srcdir)/linux-fixed-code.h): Specify the asm input
+ directly rather than use $<. Move the file name to the end of the
+ sed command to be POSIX compliant.
+
+2014-08-19 Alan Modra <amodra@gmail.com>
+
+ * configure: Regenerate.
+
+2014-08-15 Roland McGrath <mcgrathr@google.com>
+
+ * configure: Regenerate.
+ * config.in: Regenerate.
+
+2014-03-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2013-09-23 Alan Modra <amodra@gmail.com>
+
+ * configure: Regenerate.
+
+2013-06-23 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (decode_dsp32alu_0): Add note about broken handling of
+ SEARCH with parallel insns.
+
+2013-06-23 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (decode_dsp32shift_0): Make sure HLs is 0 after last
+ insn that uses it.
+ (decode_dsp32shiftimm_0): Likewise.
+ Require HLs be less than 2 for accumulator shift insns.
+
+2013-06-18 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (decode_dsp32alu_0): Check more opcode fields before
+ decoding various insns.
+
+2013-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * TODO: Add more notes.
+
+2013-06-09 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in ($(srcdir)/linux-fixed-code.h): Add
+ @MAINTAINER_MODE_TRUE@ as the first item in the dependency list.
+
+2013-06-03 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, configure: Regenerate.
+
+2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
+
+ * configure: Rebuild.
+
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, configure: Regenerate.
+
+2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ * configure.ac: Use $SIM_DV_SOCKSER_O.
+ * configure: Regenerated.
+
+2012-12-20 Joel Brobecker <brobecker@adacore.com>
+
+ * aclocal.m4: Revert the previous change changing
+ the license from GPL v2 or later to GPL v3 or later
+ (this file was generated).
+
+2012-12-20 Joel Brobecker <brobecker@adacore.com>
+
+ * linux-fixed-code.s: Revert the previous change changing
+ the license from GPL v2 or later to GPL v3 or later.
+
+2012-07-31 Mike Frysinger <vapier@gentoo.org>
+
+ * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and
+ 0x10000 to the alias field of BFROMA.
+ (bf561_roms): Pass 0x1000 to alias field of BFROM.
+ (bf59x_roms): Pass 0x10000 to alias field of BFROMA.
+
+2012-07-31 Mike Frysinger <vapier@gentoo.org>
+
+ * machs.c (bfin_reg_fetch): Change return 0 to return -1, and
+ return -1 to return 4.
+ (bfin_reg_store): Likewise.
+
+2012-06-15 Joel Brobecker <brobecker@adacore.com>
+
+ * config.in, configure: Regenerate.
+
+2012-04-09 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint.
+ * configure: Regenerate.
+ * dv-bfin_pint.c, dv-bfin_pint.h: New device model.
+ * machs.c (bf542_dev): Add PINT register blocks.
+ (bf544_dev, bf547_dev): Likewise.
+ (PINT_PIQS): Define.
+ (bf54x_port): Add pint/gpio routing.
+ * machs.h (BFIN_MMR_PINT_SIZE): Define.
+
+2012-04-09 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2.
+ * configure: Regenerate.
+ * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model.
+ * machs.c (bf54x_mem): Delete GPIO mem stub.
+ (bf542_dev): Add GPIO register blocks.
+ (bf544_dev, bf547_dev): Likewise.
+ * machs.h (BFIN_MMR_GPIO2_SIZE): Define.
+
+2012-04-09 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT
+ and LSHIFT, and set ASTAT based on the before/after values.
+ Rename "val" to "acc" to be consistent with other code branches.
+
+2012-04-09 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (sgn_extend): New helper.
+ (decode_dsp32shiftimm_0): Call lshift when newimmag is more
+ than 16, otherwise call ashiftrt. Set ASTAT fields as needed.
+ For accumulator shifts, call new sgn_extend helper.
+
+2012-04-08 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (illegal_instruction_or_combination): New helper.
+ (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead
+ of illegal_instruction.
+ (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0,
+ decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
+ decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise.
+ (decode_PushPopMultiple_0): Call illegal_instruction_combination when
+ PARALLEL_GROUP is not BFIN_PARALLEL_NONE.
+ (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0,
+ decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise.
+ (decode_CC2stat_0): Check PARALLEL_GROUP before cbit.
+ (decode_LDSTpmod_0): Call illegal_instruction_combination when
+ PARALLEL_GROUP is BFIN_PARALLEL_GROUP2.
+ (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0,
+ decode_LDSTiiFP_0, decode_LDSTii_0): Likewise.
+
+2012-04-08 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.h (bfin_parallel_group): New enum.
+ (bfin_cpu_state): Add new "group" member.
+ (PARALLEL_GROUP): Define.
+ * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to
+ PARALLEL_GROUP.
+ (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0,
+ decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
+ decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0,
+ decode_CALLa_0, decode_linkage_0): Likewise.
+ (_interp_insn_bfin): Set PARALLEL_GROUP.
+ (interp_insn_bfin): Likewise.
+
+2012-04-08 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN.
+
+2012-04-01 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination
+ when INSN_LEN is non-zero before 32bit decode.
+
+2012-04-01 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (fmtconst): Replace decimal handling with a single
+ sprintf call and the '*' field width.
+
+2012-04-01 Mike Frysinger <vapier@gentoo.org>
+
+ * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
+
+2012-04-01 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (bfin_user_init): Move auxvt_size decl from top to
+ inside of auxvt check.
+
+2012-03-31 Mike Frysinger <vapier@gentoo.org>
+
+ * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
+
+2012-03-31 Mike Frysinger <vapier@gentoo.org>
+
+ * devices.c: Include devices.h.
+
+2012-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, config.in, configure: Regenerate.
+
+2012-03-19 Robin Getz <robin.getz@analog.com>
+ Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (lshift): Add an overflow flag. Delete now unused
+ i, j, and tmp vars. Add a new v_i var. Split the overflow logic
+ out from the saturate logic. Do not set V ASTAT bits when working
+ with accumulators.
+ (decode_ALU2op_0): Add new argument to lshift call.
+ (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
+ Likewise.
+
+2012-03-18 Mike Frysinger <vapier@gentoo.org>
+
+ * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
+ (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
+ amc->bank_base.
+ (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
+
+2012-03-18 Mike Frysinger <vapier@gentoo.org>
+
+ * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
+ ARRAY_SIZE rather than hardcoded constant.
+
+2012-02-04 Mike Frysinger <vapier@gentoo.org>
+
+ * config.in: Regenerate.
+ * configure: Likewise.
+ * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
+ * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
+ _LINUX_TYPES_H defines.
+
+2011-12-03 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
+ tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
+ CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
+ CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
+ tstr in the tbuf output.
+
+2011-12-03 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in: Delete all dependency rules.
+ * aclocal.m4, configure: Regenerate.
+
+2011-10-19 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate after common/acinclude.m4 update.
+
+2011-10-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Change include to common/acinclude.m4.
+ * aclocal.m4, configure: Regenerate.
+
+2011-10-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
+ call. Replace common.m4 include with SIM_AC_COMMON.
+ * configure: Regenerate.
+
+2011-09-28 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
+
+2011-07-05 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (sim_do_command): Delete.
+
+2011-07-01 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
+ stat_map_32 and stat_map_64.
+ (cb_libgloss_stat_map_32): New stat map.
+ (stat_map_32, stat_map_64): New stat map pointers.
+ (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
+ stat_map_64 to cb_linux_stat_map_64.
+ (bfin_virtual_init): New function.
+ (sim_create_inferior): Call bfin_virtual_init for all other envs.
+
+2011-06-22 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
+ sc.result2 and dreg 2 to sc.errcode.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
+ else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
+ ASHIFT accumulator insns.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
+ (lshiftrt): Likewise.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
+ rather than get_extended_acc in LSHIFT insns.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
+ Check MM once when mmod is M_FU to match M_TFU better.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
+ 32, perform a left shift. Update the corresponding AV bit. Set
+ AZ when the low 32bits are also zero.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
+ call lshift only when count is positive. Otherwise, call ashiftrt.
+ With arithmetic right shift insns, call ashiftrt when the value is
+ small enough, otherwise call lshift.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (extract_mult): Call saturate_s16 directly when
+ mmod is M_IH rather than computing the result by hand.
+
+2011-06-18 Robin Getz <robin.getz@analog.com>
+
+ * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
+ before saturation, set sat when more cases saturate, and set the
+ overflow bit based on these results. For M_TFU, M_IU, M_FU, and
+ M_W32, change the max values compared against.
+ (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
+ when processing MAC1 and pass v_0 when processing MAC0. Combine
+ the results into the V/VS ASTAT bits.
+
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
(decode_macfunc): Likewise. Drop sign extension of unsigned
values.
-2011-06-18 Robin Getz <robin.getz@analog.com>
-
- * bfin-sim.c (extract_mult): When mmod is M_IH, change the order
- from round/saturate to saturate/round/saturate.
-
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (saturate_s40_astat): Change ">=" to ">".