-# This file contains common code used by all simulators.
-#
-# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
-# directory. It is intended to be invoked before any target specific stuff.
-# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
-# It is intended to be invoked last.
-#
-# The simulator's configure.in should look like:
-#
-# dnl Process this file with autoconf to produce a configure script.
-# sinclude(../common/aclocal.m4)
-# AC_PREREQ(2.5)dnl
-# AC_INIT(Makefile.in)
-#
-# SIM_AC_COMMON
-#
-# ... target specific stuff ...
-#
-# SIM_AC_OUTPUT
-
-# Include global overrides and fixes for Autoconf.
-m4_include(../../config/override.m4)
-
-AC_DEFUN([SIM_AC_COMMON],
-[
-# autoconf.info says this should be called right after AC_INIT.
-AC_CONFIG_HEADER(ifelse([$1],,config.h,[$1]):config.in)
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
-AC_PROG_CC
-AC_PROG_INSTALL
-
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test "x$cross_compiling" = "xno"; then
- CC_FOR_BUILD='$(CC)'
-else
- CC_FOR_BUILD=gcc
-fi
-AC_SUBST(CC_FOR_BUILD)
-
-AC_SUBST(CFLAGS)
-AC_SUBST(HDEFINES)
-AR=${AR-ar}
-AC_SUBST(AR)
-AC_PROG_RANLIB
-
-dnl We don't use gettext, but bfd does. So we do the appropriate checks
-dnl to see if there are intl libraries we should link against.
-ALL_LINGUAS=
-ZW_GNU_GETTEXT_SISTER_DIR(../../intl)
-
-# Check for common headers.
-# FIXME: Seems to me this can cause problems for i386-windows hosts.
-# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
-AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h)
-AC_CHECK_HEADERS(sys/time.h sys/resource.h)
-AC_CHECK_HEADERS(fcntl.h fpu_control.h)
-AC_CHECK_HEADERS(dlfcn.h errno.h sys/stat.h)
-AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)
-
-# Check for socket libraries
-AC_CHECK_LIB(socket, bind)
-AC_CHECK_LIB(nsl, gethostbyname)
-
-. ${srcdir}/../../bfd/configure.host
-
-dnl Standard (and optional) simulator options.
-dnl Eventually all simulators will support these.
-dnl Do not add any here that cannot be supported by all simulators.
-dnl Do not add similar but different options to a particular simulator,
-dnl all shall eventually behave the same way.
-
-
-dnl We don't use automake, but we still want to support
-dnl --enable-maintainer-mode.
-USE_MAINTAINER_MODE=no
-AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode Enable developer functionality.],
-[case "${enableval}" in
- yes) MAINT="" USE_MAINTAINER_MODE=yes ;;
- no) MAINT="#" ;;
- *) AC_MSG_ERROR("--enable-maintainer-mode does not take a value"); MAINT="#" ;;
-esac
-if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
- echo "Setting maintainer mode" 6>&1
-fi],[MAINT="#"])dnl
-AC_SUBST(MAINT)
-
-
-dnl This is a generic option to enable special byte swapping
-dnl insns on *any* cpu.
-AC_ARG_ENABLE(sim-bswap,
-[ --enable-sim-bswap Use Host specific BSWAP instruction.],
-[case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi],[sim_bswap=""])dnl
-AC_SUBST(sim_bswap)
-
-
-AC_ARG_ENABLE(sim-cflags,
-[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator],
-[case "${enableval}" in
- yes) sim_cflags="-O2 -fomit-frame-pointer";;
- trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";;
- no) sim_cflags="";;
- *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
- echo "Setting sim cflags = $sim_cflags" 6>&1
-fi],[sim_cflags=""])dnl
-AC_SUBST(sim_cflags)
-
-
-dnl --enable-sim-debug is for developers of the simulator
-dnl the allowable values are work-in-progress
-AC_ARG_ENABLE(sim-debug,
-[ --enable-sim-debug=opts Enable debugging flags],
-[case "${enableval}" in
- yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
- no) sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
- *) sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
- echo "Setting sim debug = $sim_debug" 6>&1
-fi],[sim_debug=""])dnl
-AC_SUBST(sim_debug)
-
-
-dnl --enable-sim-stdio is for users of the simulator
-dnl It determines if IO from the program is routed through STDIO (buffered)
-AC_ARG_ENABLE(sim-stdio,
-[ --enable-sim-stdio Specify whether to use stdio for console input/output.],
-[case "${enableval}" in
- yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
- no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
- echo "Setting stdio flags = $sim_stdio" 6>&1
-fi],[sim_stdio=""])dnl
-AC_SUBST(sim_stdio)
-
-
-dnl --enable-sim-trace is for users of the simulator
-dnl The argument is either a bitmask of things to enable [exactly what is
-dnl up to the simulator], or is a comma separated list of names of tracing
-dnl elements to enable. The latter is only supported on simulators that
-dnl use WITH_TRACE.
-AC_ARG_ENABLE(sim-trace,
-[ --enable-sim-trace=opts Enable tracing flags],
-[case "${enableval}" in
- yes) sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
- no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
- [[-0-9]]*)
- sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
- [[a-z]]*)
- sim_trace=""
- for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
- if test x"$sim_trace" = x; then
- sim_trace="-DWITH_TRACE='(TRACE_$x"
- else
- sim_trace="${sim_trace}|TRACE_$x"
- fi
- done
- sim_trace="$sim_trace)'" ;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
- echo "Setting sim trace = $sim_trace" 6>&1
-fi],[sim_trace=""])dnl
-AC_SUBST(sim_trace)
-
-
-dnl --enable-sim-profile
-dnl The argument is either a bitmask of things to enable [exactly what is
-dnl up to the simulator], or is a comma separated list of names of profiling
-dnl elements to enable. The latter is only supported on simulators that
-dnl use WITH_PROFILE.
-AC_ARG_ENABLE(sim-profile,
-[ --enable-sim-profile=opts Enable profiling flags],
-[case "${enableval}" in
- yes) sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
- no) sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
- [[-0-9]]*)
- sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
- [[a-z]]*)
- sim_profile=""
- for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
- if test x"$sim_profile" = x; then
- sim_profile="-DWITH_PROFILE='(PROFILE_$x"
- else
- sim_profile="${sim_profile}|PROFILE_$x"
- fi
- done
- sim_profile="$sim_profile)'" ;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
- echo "Setting sim profile = $sim_profile" 6>&1
-fi],[sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"])dnl
-AC_SUBST(sim_profile)
-
-
-dnl Types used by common code
-AC_TYPE_SIGNAL
-
-dnl Detect exe extension
-AC_EXEEXT
-
-dnl These are available to append to as desired.
-sim_link_files=
-sim_link_links=
-
-dnl Create tconfig.h either from simulator's tconfig.in or default one
-dnl in common.
-sim_link_links=tconfig.h
-if test -f ${srcdir}/tconfig.in
-then
- sim_link_files=tconfig.in
-else
- sim_link_files=../common/tconfig.in
-fi
-
-# targ-vals.def points to the libc macro description file.
-case "${target}" in
-*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
-esac
-sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
-sim_link_links="${sim_link_links} targ-vals.def"
-
-]) dnl End of SIM_AC_COMMON
-
-
-dnl Additional SIM options that can (optionally) be configured
-dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
-dnl Simulators that wish to use the relevant option specify the macro
-dnl in the simulator specific configure.in file between the SIM_AC_COMMON
-dnl and SIM_AC_OUTPUT lines.
-
-
-dnl Specify the running environment.
-dnl If the simulator invokes this in its configure.in then without this option
-dnl the default is the user environment and all are runtime selectable.
-dnl If the simulator doesn't invoke this, only the user environment is
-dnl supported.
-dnl ??? Until there is demonstrable value in doing something more complicated,
-dnl let's not.
-AC_DEFUN([SIM_AC_OPTION_ENVIRONMENT],
-[
-AC_ARG_ENABLE(sim-environment,
-[ --enable-sim-environment=environment Specify mixed, user, virtual or operating environment.],
-[case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-environment");
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi],
-[sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"])dnl
-])
-AC_SUBST(sim_environment)
-
-
-dnl Specify the alignment restrictions of the target architecture.
-dnl Without this option all possible alignment restrictions are accommodated.
-dnl arg[1] is hardwired target alignment
-dnl arg[2] is default target alignment
-AC_DEFUN([SIM_AC_OPTION_ALIGNMENT],
-wire_alignment="[$1]"
-default_alignment="[$2]"
-[
-AC_ARG_ENABLE(sim-alignment,
-[ --enable-sim-alignment=align Specify strict, nonstrict or forced alignment of memory accesses.],
-[case "${enableval}" in
- strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
- nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
- forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
- yes) if test x"$wire_alignment" != x; then
- sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
- else
- if test x"$default_alignment" != x; then
- sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
- else
- echo "No hard-wired alignment for target $target" 1>&6
- sim_alignment="-DWITH_ALIGNMENT=0"
- fi
- fi;;
- no) if test x"$default_alignment" != x; then
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
- else
- if test x"$wire_alignment" != x; then
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
- else
- echo "No default alignment for target $target" 1>&6
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
- fi
- fi;;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
- echo "Setting alignment flags = $sim_alignment" 6>&1
-fi],
-[if test x"$default_alignment" != x; then
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
-else
- if test x"$wire_alignment" != x; then
- sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
- else
- sim_alignment=
- fi
-fi])dnl
-])dnl
-AC_SUBST(sim_alignment)
-
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
-dnl Conditionally compile in assertion statements.
-AC_DEFUN([SIM_AC_OPTION_ASSERT],
-[
-AC_ARG_ENABLE(sim-assert,
-[ --enable-sim-assert Specify whether to perform random assertions.],
-[case "${enableval}" in
- yes) sim_assert="-DWITH_ASSERT=1";;
- no) sim_assert="-DWITH_ASSERT=0";;
- *) AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
- echo "Setting assert flags = $sim_assert" 6>&1
-fi],[sim_assert=""])dnl
-])
-AC_SUBST(sim_assert)
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+# AM_CONDITIONAL -*- Autoconf -*-
-dnl --enable-sim-bitsize is for developers of the simulator
-dnl It specifies the number of BITS in the target.
-dnl arg[1] is the number of bits in a word
-dnl arg[2] is the number assigned to the most significant bit
-dnl arg[3] is the number of bits in an address
-dnl arg[4] is the number of bits in an OpenFirmware cell.
-dnl FIXME: this information should be obtained from bfd/archure
-AC_DEFUN([SIM_AC_OPTION_BITSIZE],
-wire_word_bitsize="[$1]"
-wire_word_msb="[$2]"
-wire_address_bitsize="[$3]"
-wire_cell_bitsize="[$4]"
-[AC_ARG_ENABLE(sim-bitsize,
-[ --enable-sim-bitsize=N Specify target bitsize (32 or 64).],
-[sim_bitsize=
-case "${enableval}" in
- 64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
- 32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
- 64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
- 32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
- 32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
- else
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
- fi ;;
- 64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
- else
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
- fi ;;
- *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64") ;;
-esac
-# address bitsize
-tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`
-case x"${tmp}" in
- x ) ;;
- x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
- x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
- * ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval. Expected 32 or 64") ;;
-esac
-# cell bitsize
-tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`
-case x"${tmp}" in
- x ) ;;
- x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
- x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
- * ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64") ;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
- echo "Setting bitsize flags = $sim_bitsize" 6>&1
-fi],
-[sim_bitsize=""
-if test x"$wire_word_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
-fi
-if test x"$wire_word_msb" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
-fi
-if test x"$wire_address_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
-fi
-if test x"$wire_cell_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
-fi])dnl
-])
-AC_SUBST(sim_bitsize)
-
-
-
-dnl --enable-sim-endian={yes,no,big,little} is for simulators
-dnl that support both big and little endian targets.
-dnl arg[1] is hardwired target endianness.
-dnl arg[2] is default target endianness.
-AC_DEFUN([SIM_AC_OPTION_ENDIAN],
-[
-wire_endian="[$1]"
-default_endian="[$2]"
-AC_ARG_ENABLE(sim-endian,
-[ --enable-sim-endian=endian Specify target byte endian orientation.],
-[case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
- fi
- fi;;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi],
-[if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
- else
- sim_endian=
- fi
-fi])dnl
-])
-AC_SUBST(sim_endian)
-
-
-dnl --enable-sim-hostendian is for users of the simulator when
-dnl they find that AC_C_BIGENDIAN does not function correctly
-dnl (for instance in a canadian cross)
-AC_DEFUN([SIM_AC_OPTION_HOSTENDIAN],
-[
-AC_ARG_ENABLE(sim-hostendian,
-[ --enable-sim-hostendian=end Specify host byte endian orientation.],
-[case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
- echo "Setting hostendian flags = $sim_hostendian" 6>&1
-fi],[
-if test "x$cross_compiling" = "xno"; then
- AC_C_BIGENDIAN
- if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
- else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
- fi
-else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
-fi])dnl
-])
-AC_SUBST(sim_hostendian)
-
-
-dnl --enable-sim-float is for developers of the simulator
-dnl It specifies the presence of hardware floating point
-dnl And optionally the bitsize of the floating point register.
-dnl arg[1] specifies the presence (or absence) of floating point hardware
-dnl arg[2] specifies the number of bits in a floating point register
-AC_DEFUN([SIM_AC_OPTION_FLOAT],
-[
-default_sim_float="[$1]"
-default_sim_float_bitsize="[$2]"
-AC_ARG_ENABLE(sim-float,
-[ --enable-sim-float Specify that the target processor has floating point hardware.],
-[case "${enableval}" in
- yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
- no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
- 32) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
- 64) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
- echo "Setting float flags = $sim_float" 6>&1
-fi],[
-sim_float=
-if test x"${default_sim_float}" != x""; then
- sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
-fi
-if test x"${default_sim_float_bitsize}" != x""; then
- sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
-fi
-])dnl
-])
-AC_SUBST(sim_float)
-
-
-dnl The argument is the default cache size if none is specified.
-AC_DEFUN([SIM_AC_OPTION_SCACHE],
-[
-default_sim_scache="ifelse([$1],,0,[$1])"
-AC_ARG_ENABLE(sim-scache,
-[ --enable-sim-scache=size Specify simulator execution cache size.],
-[case "${enableval}" in
- yes) sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
- no) sim_scache="-DWITH_SCACHE=0" ;;
- [[0-9]]*) sim_scache="-DWITH_SCACHE=${enableval}";;
- *) AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");
- sim_scache="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
- echo "Setting scache size = $sim_scache" 6>&1
-fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])
-])
-AC_SUBST(sim_scache)
-
-
-dnl The argument is the default model if none is specified.
-AC_DEFUN([SIM_AC_OPTION_DEFAULT_MODEL],
-[
-default_sim_default_model="ifelse([$1],,0,[$1])"
-AC_ARG_ENABLE(sim-default-model,
-[ --enable-sim-default-model=model Specify default model to simulate.],
-[case "${enableval}" in
- yes|no) AC_MSG_ERROR("Missing argument to --enable-sim-default-model");;
- *) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
- echo "Setting default model = $sim_default_model" 6>&1
-fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])
-])
-AC_SUBST(sim_default_model)
-
-
-dnl --enable-sim-hardware is for users of the simulator
-dnl arg[1] Enable sim-hw by default? ("yes" or "no")
-dnl arg[2] is a space separated list of devices that override the defaults
-dnl arg[3] is a space separated list of extra target specific devices.
-AC_DEFUN([SIM_AC_OPTION_HARDWARE],
-[
-if test x"[$1]" = x"yes"; then
- sim_hw_p=yes
-else
- sim_hw_p=no
-fi
-if test "[$2]"; then
- hardware="core pal glue"
-else
- hardware="core pal glue [$3]"
-fi
-sim_hw_cflags="-DWITH_HW=1"
-sim_hw="$hardware"
-sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
-AC_ARG_ENABLE(sim-hardware,
-[ --enable-sim-hardware=LIST Specify the hardware to be included in the build.],
-[
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
- ,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
- *,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
-esac
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
else
- sim_hw_cflags="-DWITH_HW=1"
- # remove duplicates
- sim_hw=""
- sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
- for i in $hardware ; do
- case " $sim_hw " in
- *" $i "*) ;;
- *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
- esac
- done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi],[
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
+ $1_TRUE='#'
+ $1_FALSE=
fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi])dnl
-])
-AC_SUBST(sim_hw_cflags)
-AC_SUBST(sim_hw_objs)
-AC_SUBST(sim_hw)
-
-
-dnl --enable-sim-inline is for users that wish to ramp up the simulator's
-dnl performance by inlining functions.
-dnl Guarantee that unconfigured simulators do not do any inlining
-sim_inline="-DDEFAULT_INLINE=0"
-AC_DEFUN([SIM_AC_OPTION_INLINE],
-[
-default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"
-AC_ARG_ENABLE(sim-inline,
-[ --enable-sim-inline=inlines Specify which functions should be inlined.],
-[sim_inline=""
-case "$enableval" in
- no) sim_inline="-DDEFAULT_INLINE=0";;
- 0) sim_inline="-DDEFAULT_INLINE=0";;
- yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
- 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
- *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
- new_flag=""
- case "$x" in
- *_INLINE=*) new_flag="-D$x";;
- *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
- *_INLINE) new_flag="-D$x=ALL_C_INLINE";;
- *) new_flag="-D$x""_INLINE=ALL_C_INLINE";;
- esac
- if test x"$sim_inline" = x""; then
- sim_inline="$new_flag"
- else
- sim_inline="$sim_inline $new_flag"
- fi
- done;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
- echo "Setting inline flags = $sim_inline" 6>&1
-fi],[
-if test "x$cross_compiling" = "xno"; then
- if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
- sim_inline="${default_sim_inline}"
- if test x"$silent" != x"yes"; then
- echo "Setting inline flags = $sim_inline" 6>&1
- fi
- else
- sim_inline=""
- fi
-else
- sim_inline="-DDEFAULT_INLINE=0"
-fi])dnl
-])
-AC_SUBST(sim_inline)
-
-
-AC_DEFUN([SIM_AC_OPTION_PACKAGES],
-[
-AC_ARG_ENABLE(sim-packages,
-[ --enable-sim-packages=list Specify the packages to be included in the build.],
-[packages=disklabel
-case "${enableval}" in
- yes) ;;
- no) AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;
- ,*) packages="${packages}${enableval}";;
- *,) packages="${enableval}${packages}";;
- *) packages="${enableval}"'';;
-esac
-sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
-sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
-if test x"$silent" != x"yes" && test x"$packages" != x""; then
- echo "Setting packages to $sim_pk_src, $sim_pk_obj"
-fi],[packages=disklabel
-sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
-sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
-if test x"$silent" != x"yes"; then
- echo "Setting packages to $sim_pk_src, $sim_pk_obj"
-fi])dnl
-])
-AC_SUBST(sim_packages)
-
-
-AC_DEFUN([SIM_AC_OPTION_REGPARM],
-[
-AC_ARG_ENABLE(sim-regparm,
-[ --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific.],
-[case "${enableval}" in
- 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;
- no) sim_regparm="" ;;
- yes) sim_regparm="-DWITH_REGPARM=3";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
- echo "Setting regparm flags = $sim_regparm" 6>&1
-fi],[sim_regparm=""])dnl
-])
-AC_SUBST(sim_regparm)
-
-
-AC_DEFUN([SIM_AC_OPTION_RESERVED_BITS],
-[
-default_sim_reserved_bits="ifelse([$1],,1,[$1])"
-AC_ARG_ENABLE(sim-reserved-bits,
-[ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction.],
-[case "${enableval}" in
- yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
- no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
- *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
- echo "Setting reserved flags = $sim_reserved_bits" 6>&1
-fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl
-])
-AC_SUBST(sim_reserved_bits)
-
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
-AC_DEFUN([SIM_AC_OPTION_SMP],
-[
-default_sim_smp="ifelse([$1],,5,[$1])"
-AC_ARG_ENABLE(sim-smp,
-[ --enable-sim-smp=n Specify number of processors to configure for (default ${default_sim_smp}).],
-[case "${enableval}" in
- yes) sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;
- no) sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;
- *) sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
- echo "Setting smp flags = $sim_smp" 6>&1
-fi],[sim_smp="-DWITH_SMP=${default_sim_smp}" ; sim_igen_smp="-N ${default_sim_smp}"
-if test x"$silent" != x"yes"; then
- echo "Setting smp flags = $sim_smp" 6>&1
-fi])dnl
-])
-AC_SUBST(sim_smp)
-
-
-AC_DEFUN([SIM_AC_OPTION_STDCALL],
-[
-AC_ARG_ENABLE(sim-stdcall,
-[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.],
-[case "${enableval}" in
- no) sim_stdcall="" ;;
- std*) sim_stdcall="-DWITH_STDCALL=1";;
- yes) sim_stdcall="-DWITH_STDCALL=1";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
- echo "Setting function call flags = $sim_stdcall" 6>&1
-fi],[sim_stdcall=""])dnl
-])
-AC_SUBST(sim_stdcall)
-
-
-AC_DEFUN([SIM_AC_OPTION_XOR_ENDIAN],
-[
-default_sim_xor_endian="ifelse([$1],,8,[$1])"
-AC_ARG_ENABLE(sim-xor-endian,
-[ --enable-sim-xor-endian=n Specify number bytes involved in XOR bi-endian mode (default ${default_sim_xor_endian}).],
-[case "${enableval}" in
- yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
- no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
- *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
- echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
-fi],[sim_xor_endian="-DWITH_XOR_ENDIAN=${default_sim_xor_endian}"])dnl
-])
-AC_SUBST(sim_xor_endian)
-
-
-dnl --enable-build-warnings is for developers of the simulator.
-dnl it enables extra GCC specific warnings.
-AC_DEFUN([SIM_AC_OPTION_WARNINGS],
-[
-# NOTE: Don't add -Wall or -Wunused, they both include
-# -Wunused-parameter which reports bogus warnings.
-# NOTE: If you add to this list, remember to update
-# gdb/doc/gdbint.texinfo.
-build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \
--Wformat -Wparentheses -Wpointer-arith"
-# GCC supports -Wuninitialized only with -O or -On, n != 0.
-if test x${CFLAGS+set} = xset; then
- case "${CFLAGS}" in
- *"-O0"* ) ;;
- *"-O"* )
- build_warnings="${build_warnings} -Wuninitialized"
- ;;
- esac
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
else
- build_warnings="${build_warnings} -Wuninitialized"
-fi
-# Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs
-# -Wunused-function -Wunused-label -Wunused-variable -Wunused-value
-# -Wchar-subscripts -Wtraditional -Wshadow -Wcast-qual
-# -Wcast-align -Wwrite-strings -Wconversion -Wstrict-prototypes
-# -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls
-# -Woverloaded-virtual -Winline -Werror"
-AC_ARG_ENABLE(build-warnings,
-[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
-[case "${enableval}" in
- yes) ;;
- no) build_warnings="-w";;
- ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
- *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting compiler warning flags = $build_warnings" 6>&1
-fi])dnl
-AC_ARG_ENABLE(sim-build-warnings,
-[ --enable-gdb-build-warnings Enable SIM specific build-time compiler warnings if gcc is used],
-[case "${enableval}" in
- yes) ;;
- no) build_warnings="-w";;
- ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
- *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
-fi])dnl
-WARN_CFLAGS=""
-WERROR_CFLAGS=""
-if test "x${build_warnings}" != x -a "x$GCC" = xyes
-then
- AC_MSG_CHECKING(compiler warning flags)
- # Separate out the -Werror flag as some files just cannot be
- # compiled with it enabled.
- for w in ${build_warnings}; do
- case $w in
- -Werr*) WERROR_CFLAGS=-Werror ;;
- *) # Check that GCC accepts it
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $w"
- AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)
- CFLAGS="$saved_CFLAGS"
- esac
- done
- AC_MSG_RESULT(${WARN_CFLAGS}${WERROR_CFLAGS})
+ am__leading_dot=_
fi
-])
-AC_SUBST(WARN_CFLAGS)
-AC_SUBST(WERROR_CFLAGS)
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-dnl Generate the Makefile in a target specific directory.
-dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
-dnl so this is a cover macro to tuck the details away of how we cope.
-dnl We cope by having autoconf generate two files and then merge them into
-dnl one afterwards. The two pieces of the common fragment are inserted into
-dnl the target's fragment at the appropriate points.
+# serial 2
-AC_DEFUN([SIM_AC_OUTPUT],
-[
-AC_LINK_FILES($sim_link_files, $sim_link_links)
-dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.
-cgen_breaks=""
-if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
-cgen_breaks="break cgen_rtx_error";
-fi
-AC_SUBST(cgen_breaks)
-AC_CONFIG_FILES(Makefile.sim:Makefile.in)
-AC_CONFIG_FILES(Make-common.sim:../common/Make-common.in)
-AC_CONFIG_FILES(.gdbinit:../common/gdbinit.in)
-AC_CONFIG_COMMANDS([Makefile],
-[echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
- -e '/^## COMMON_POST_/ r Makesim2.tmp' \
- <Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
-])
-AC_CONFIG_COMMANDS([stamp-h], [echo > stamp-h])
-AC_OUTPUT
-])
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
-sinclude(../../config/gettext-sister.m4)
-sinclude(../../config/acx.m4)
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-dnl --enable-cgen-maint support
-AC_DEFUN([SIM_AC_OPTION_CGEN_MAINT],
-[
-cgen_maint=no
-dnl Default is to use one in build tree.
-cgen=guile
-cgendir='$(srcdir)/../../cgen'
-dnl Having --enable-maintainer-mode take arguments is another way to go.
-dnl ??? One can argue --with is more appropriate if one wants to specify
-dnl a directory name, but what we're doing here is an enable/disable kind
-dnl of thing and specifying both --enable and --with is klunky.
-dnl If you reeely want this to be --with, go ahead and change it.
-AC_ARG_ENABLE(cgen-maint,
-[ --enable-cgen-maint[=DIR] build cgen generated files],
-[case "${enableval}" in
- yes) cgen_maint=yes ;;
- no) cgen_maint=no ;;
- *)
- # argument is cgen install directory (not implemented yet).
- # Having a `share' directory might be more appropriate for the .scm,
- # .cpu, etc. files.
- cgendir=${cgen_maint}/lib/cgen
- cgen=guile
- ;;
-esac])dnl
-dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)
-if test x${cgen_maint} != xno ; then
- CGEN_MAINT=''
-else
- CGEN_MAINT='#'
-fi
-AC_SUBST(CGEN_MAINT)
-AC_SUBST(cgendir)
-AC_SUBST(cgen)
-])
+m4_include([acinclude.m4])
projects / thirdparty / binutils-gdb.git / blobdiff