In a recent commit, pack-objects learned support for the
'pack.preferBitmapTips' configuration. This patch prepares the
multi-pack bitmap code to respect this configuration, too.
The yet-to-be implemented code will find that it is more efficient to
check whether each reference contains a prefix found in the configured
set of values rather than doing an additional traversal.
Implement a function 'bitmap_is_preferred_refname()' which will perform
that check. Its caller will be added in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to fetch the nth OID contained in
the bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 31 Aug 2021 20:52:12 +0000 (16:52 -0400)]
pack-bitmap.c: introduce 'bitmap_num_objects()'
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to return how many objects are
contained in a bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 1 Sep 2021 20:34:01 +0000 (16:34 -0400)]
midx: avoid opening multiple MIDXs when writing
Opening multiple instance of the same MIDX can lead to problems like two
separate packed_git structures which represent the same pack being added
to the repository's object store.
The above scenario can happen because prepare_midx_pack() checks if
`m->packs[pack_int_id]` is NULL in order to determine if a pack has been
opened and installed in the repository before. But a caller can
construct two copies of the same MIDX by calling get_multi_pack_index()
and load_multi_pack_index() since the former manipulates the
object store directly but the latter is a lower-level routine which
allocates a new MIDX for each call.
So if prepare_midx_pack() is called on multiple MIDXs with the same
pack_int_id, then that pack will be installed twice in the object
store's packed_git pointer.
This can lead to problems in, for e.g., the pack-bitmap code, which does
something like the following (in pack-bitmap.c:open_pack_bitmap()):
struct bitmap_index *bitmap_git = ...;
for (p = get_all_packs(r); p; p = p->next) {
if (open_pack_bitmap_1(bitmap_git, p) == 0)
ret = 0;
}
which is a problem if two copies of the same pack exist in the
packed_git list because pack-bitmap.c:open_pack_bitmap_1() contains a
conditional like the following:
if (bitmap_git->pack || bitmap_git->midx) {
/* ignore extra bitmap file; we can only handle one */
warning("ignoring extra bitmap file: %s", packfile->pack_name);
close(fd);
return -1;
}
Avoid this scenario by not letting write_midx_internal() open a MIDX
that isn't also pointed at by the object store. So long as this is the
case, other routines should prefer to open MIDXs with
get_multi_pack_index() or reprepare_packed_git() instead of creating
instances on their own. Because get_multi_pack_index() returns
`r->object_store->multi_pack_index` if it is non-NULL, we'll only have
one instance of a MIDX open at one time, avoiding these problems.
To encourage this, drop the `struct multi_pack_index *` parameter from
`write_midx_internal()`, and rely instead on the `object_dir` to find
(or initialize) the correct MIDX instance.
Likewise, replace the call to `close_midx()` with
`close_object_store()`, since we're about to replace the MIDX with a new
one and should invalidate the object store's memory of any MIDX that
might have existed beforehand.
Note that this now forbids passing object directories that don't belong
to alternate repositories over `--object-dir`, since before we would
have happily opened a MIDX in any directory, but now restrict ourselves
to only those reachable by `r->objects->multi_pack_index` (and alternate
MIDXs that we can see by walking the `next` pointer).
As far as I can tell, supporting arbitrary directories with
`--object-dir` was a historical accident, since even the documentation
says `<alt>` when referring to the value passed to this option.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 31 Aug 2021 20:52:07 +0000 (16:52 -0400)]
midx: close linked MIDXs, avoid leaking memory
When a repository has at least one alternate, the MIDX belonging to each
alternate is accessed through the `next` pointer on the main object
store's copy of the MIDX. close_midx() didn't bother to close any
of the linked MIDXs. It likewise didn't free the memory pointed to by
`m`, leaving uninitialized bytes with live pointers to them left around
in the heap.
Clean this up by closing linked MIDXs, and freeing up the memory pointed
to by each of them. When callers call close_midx(), then they can
discard the entire linked list of MIDXs and set their pointer to the
head of that list to NULL.
This isn't strictly required for the upcoming patches, but it makes it
much more difficult (though still possible, for e.g., by calling
`close_midx(m->next)` which leaves `m->next` pointing at uninitialized
bytes) to have pointers to uninitialized memory.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 31 Aug 2021 20:52:04 +0000 (16:52 -0400)]
midx: infer preferred pack when not given one
In 9218c6a40c (midx: allow marking a pack as preferred, 2021-03-30), the
multi-pack index code learned how to select a pack which all duplicate
objects are selected from. That is, if an object appears in multiple
packs, select the copy in the preferred pack before breaking ties
according to the other rules like pack mtime and readdir() order.
Not specifying a preferred pack can cause serious problems with
multi-pack reachability bitmaps, because these bitmaps rely on having at
least one pack from which all duplicates are selected. Not having such a
pack causes problems with the code in pack-objects to reuse packs
verbatim (e.g., that code assumes that a delta object in a chunk of pack
sent verbatim will have its base object sent from the same pack).
So why does not marking a pack preferred cause problems here? The reason
is roughly as follows:
- Ties are broken (when handling duplicate objects) by sorting
according to midx_oid_compare(), which sorts objects by OID,
preferred-ness, pack mtime, and finally pack ID (more on that
later).
- The psuedo pack-order (described in
Documentation/technical/pack-format.txt under the section
"multi-pack-index reverse indexes") is computed by
midx_pack_order(), and sorts by pack ID and pack offset, with
preferred packs sorting first.
- But! Pack IDs come from incrementing the pack count in
add_pack_to_midx(), which is a callback to
for_each_file_in_pack_dir(), meaning that pack IDs are assigned in
readdir() order.
When specifying a preferred pack, all of that works fine, because
duplicate objects are correctly resolved in favor of the copy in the
preferred pack, and the preferred pack sorts first in the object order.
"Sorting first" is critical, because the bitmap code relies on finding
out which pack holds the first object in the MIDX's pseudo pack-order to
determine which pack is preferred.
But if we didn't specify a preferred pack, and the pack which comes
first in readdir() order does not also have the lowest timestamp, then
it's possible that that pack (the one that sorts first in pseudo-pack
order, which the bitmap code will treat as the preferred one) did *not*
have all duplicate objects resolved in its favor, resulting in breakage.
The fix is simple: pick a (semi-arbitrary, non-empty) preferred pack
when none was specified. This forces that pack to have duplicates
resolved in its favor, and (critically) to sort first in pseudo-pack
order. Unfortunately, testing this behavior portably isn't possible,
since it depends on readdir() order which isn't guaranteed by POSIX.
(Note that multi-pack reachability bitmaps have yet to be implemented;
so in that sense this patch is fixing a bug which does not yet exist.
But by having this patch beforehand, we can prevent the bug from ever
materializing.)
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 31 Aug 2021 20:52:02 +0000 (16:52 -0400)]
midx: reject empty `--preferred-pack`'s
The soon-to-be-implemented multi-pack bitmap treats object in the first
bit position specially by assuming that all objects in the pack it was
selected from are also represented from that pack in the MIDX. In other
words, the pack from which the first object was selected must also have
all of its other objects selected from that same pack in the MIDX in
case of any duplicates.
But this assumption relies on the fact that there is at least one object
in that pack to begin with; otherwise the object in the first bit
position isn't from a preferred pack, in which case we can no longer
assume that all objects in that pack were also selected from the same
pack.
Guard this assumption by checking the number of objects in the given
preferred pack, and failing if the given pack is empty.
To make sure we can safely perform this check, open any packs which are
contained in an existing MIDX via prepare_midx_pack(). The same is done
for new packs via the add_pack_to_midx() callback, but packs picked up
from a previous MIDX will not yet have these opened.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 31 Aug 2021 20:51:59 +0000 (16:51 -0400)]
midx: clear auxiliary .rev after replacing the MIDX
When writing a new multi-pack index, write_midx_internal() attempts to
clean up any auxiliary files (currently just the MIDX's `.rev` file, but
soon to include a `.bitmap`, too) corresponding to the MIDX it's
replacing.
This step should happen after the new MIDX is written into place, since
doing so beforehand means that the old MIDX could be read without its
corresponding .rev file.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 31 Aug 2021 20:51:55 +0000 (16:51 -0400)]
midx: fix `*.rev` cleanups with `--object-dir`
If using --object-dir to point into an object directory which belongs to
a different repository than the one in the current working directory,
such as:
git init repo
git -C repo ... # add some objects
cd alternate
git multi-pack-index --object-dir ../repo/.git/objects write
the binary will segfault trying to access the object-dir via the repo it
found, but that's not fully initialized. Worse, if we later call
clear_midx_files_ext(), we will use `the_repository` and remove files
out of the wrong object directory.
Fix this by using the given object_dir (or the object directory of
`the_repository` if `--object-dir` wasn't given) to properly to clean up
the *.rev files, avoiding the crash.
Original-patch-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 31 Aug 2021 20:51:53 +0000 (16:51 -0400)]
midx: disallow running outside of a repository
The multi-pack-index command supports working with arbitrary object
directories via the `--object-dir` flag. Though this has historically
worked in arbitrary repositories (including when the command itself was
run outside of a Git repository), this has been somewhat of an accident.
outside of a Git repository causes a BUG(). This is because the
top-level `cmd_multi_pack_index()` function stops parsing when it sees
"write", and then fills in the default object directory (the result of
calling `get_object_directory()`) before handing off to
`cmd_multi_pack_index_write()`. But there is no repository to
initialize, and so calling `get_object_directory()` results in a BUG()
(indicating that the current repository is not initialized).
Another case where this doesn't quite work as expected is when operating
in a SHA-256 repository. To see the failure, try this in your shell:
and observe that we cannot open the `.idx` file in "repo", because the
outermost process assumes that any repository that it works in also uses
the default value of `the_hash_algo` (at the time of writing, SHA-1).
There may be compelling reasons for trying to work around these bugs,
but working in arbitrary `--object-dir`'s is non-standard enough (and
likewise, these bugs prevalent enough) that I don't think any workflows
would be broken by abandoning this behavior.
Accordingly, restrict the `multi-pack-index` builtin to only work when
inside of a Git repository (i.e., its main utility becomes selecting
which alternate to operate in), which avoids both of the bugs above.
(Note that you can still trigger a bug when writing a MIDX in an
alternate which does not use the same object format as the repository
which it is an alternate of, but that is an unrelated bug to this one).
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:59 +0000 (12:15 -0400)]
Documentation: describe MIDX-based bitmaps
Update the technical documentation to describe the multi-pack bitmap
format. This patch merely introduces the new format, and describes its
high-level ideas. Git does not yet know how to read nor write these
multi-pack variants, and so the subsequent patches will:
- Introduce code to interpret multi-pack bitmaps, according to this
document.
- Then, introduce code to write multi-pack bitmaps from the 'git
multi-pack-index write' sub-command.
Finally, the implementation will gain tests in subsequent patches (as
opposed to inline with the patch teaching Git how to write multi-pack
bitmaps) to avoid a cyclic dependency.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:56 +0000 (12:15 -0400)]
pack-bitmap-write.c: free existing bitmaps
When writing a new bitmap, the bitmap writer code attempts to read the
existing bitmap (if one is present). This is done in order to quickly
permute the bits of any bitmaps for commits which appear in the existing
bitmap, and were also selected for the new bitmap.
But since this code was added in 341fa34887 (pack-bitmap-write: use
existing bitmaps, 2020-12-08), the resources associated with opening an
existing bitmap were never released.
It's fine to ignore this, but it's bad hygiene. It will also cause a
problem for the multi-pack-index builtin, which will be responsible not
only for writing bitmaps, but also for expiring any old multi-pack
bitmaps.
If an existing bitmap was reused here, it will also be expired. That
will cause a problem on platforms which require file resources to be
closed before unlinking them, like Windows. Avoid this by ensuring we
close reused bitmaps with free_bitmap_index() before removing them.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:54 +0000 (12:15 -0400)]
pack-bitmap-write.c: gracefully fail to write non-closed bitmaps
The set of objects covered by a bitmap must be closed under
reachability, since it must be the case that there is a valid bit
position assigned for every possible reachable object (otherwise the
bitmaps would be incomplete).
Pack bitmaps are never written from 'git repack' unless repacking
all-into-one, and so we never write non-closed bitmaps (except in the
case of partial clones where we aren't guaranteed to have all objects).
But multi-pack bitmaps change this, since it isn't known whether the
set of objects in the MIDX is closed under reachability until walking
them. Plumb through a bit that is set when a reachable object isn't
found.
As soon as a reachable object isn't found in the set of objects to
include in the bitmap, bitmap_writer_build() knows that the set is not
closed, and so it now fails gracefully.
A test is added in t0410 to trigger a bitmap write without full
reachability closure by removing local copies of some reachable objects
from a promisor remote.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Tue, 24 Aug 2021 16:15:51 +0000 (12:15 -0400)]
pack-bitmap.c: harden 'test_bitmap_walk()' to check type bitmaps
The special `--test-bitmap` mode of `git rev-list` is used to compare
the result of an object traversal with a bitmap to check its integrity.
This mode does not, however, assert that the types of reachable objects
are stored correctly.
Harden this mode by teaching it to also check that each time an object's
bit is marked, the corresponding bit should be set in exactly one of the
type bitmaps (whose type matches the object's true type).
Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 14 Aug 2021 20:00:38 +0000 (22:00 +0200)]
oidtree: avoid unaligned access to crit-bit tree
The flexible array member "k" of struct cb_node is used to store the key
of the crit-bit tree node. It offers no alignment guarantees -- in fact
the current struct layout puts it one byte after a 4-byte aligned
address, i.e. guaranteed to be misaligned.
oidtree uses a struct object_id as cb_node key. Since cf0983213c (hash:
add an algo member to struct object_id, 2021-04-26) it requires 4-byte
alignment. The mismatch is reported by UndefinedBehaviorSanitizer at
runtime like this:
hash.h:277:2: runtime error: member access within misaligned address 0x00015000802d for type 'struct object_id', which requires 4 byte alignment
0x00015000802d: note: pointer points here
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior hash.h:277:2 in
We can fix that by:
1. eliminating the alignment requirement of struct object_id,
2. providing the alignment in struct cb_node, or
3. avoiding the issue by only using memcpy to access "k".
Currently we only store one of two values in "algo" in struct object_id.
We could use a uint8_t for that instead and widen it only once we add
support for our twohundredth algorithm or so. That would not only avoid
alignment issues, but also reduce the memory requirements for each
instance of struct object_id by ca. 9%.
Supporting keys with alignment requirements might be useful to spread
the use of crit-bit trees. It can be achieved by using a wider type for
"k" (e.g. uintmax_t), using different types for the members "byte" and
"otherbits" (e.g. uint16_t or uint32_t for each), or by avoiding the use
of flexible arrays like khash.h does.
This patch implements the third option, though, because it has the least
potential for causing side-effects and we're close to the next release.
If one of the other options is implemented later as well to get their
additional benefits we can get rid of the extra copies introduced here.
Reported-by: Andrzej Hunt <andrzej@ahunt.org> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 13 Aug 2021 23:56:22 +0000 (07:56 +0800)]
Merge branch 'master' of github.com:git/git
* 'master' of github.com:git/git: (51 commits)
Git 2.33-rc2
object-file: use unsigned arithmetic with bit mask
Revert 'diff-merges: let "-m" imply "-p"'
object-store: avoid extra ';' from KHASH_INIT
oidtree: avoid nested struct oidtree_node
Git 2.33-rc1
test: fix for COLUMNS and bash 5
The eighth batch
diff: --pickaxe-all typofix
mingw: align symlinks-related rmdir() behavior with Linux
t7508: avoid non POSIX BRE
use fspathhash() everywhere
t0001: fix broken not-quite getcwd(3) test in bed67874e2
Documentation: render special characters correctly
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
...
Junio C Hamano [Wed, 11 Aug 2021 19:36:17 +0000 (12:36 -0700)]
Merge branch 'cb/many-alternate-optim-fixup'
Build fix.
* cb/many-alternate-optim-fixup:
object-file: use unsigned arithmetic with bit mask
object-store: avoid extra ';' from KHASH_INIT
oidtree: avoid nested struct oidtree_node
René Scharfe [Fri, 6 Aug 2021 17:53:47 +0000 (19:53 +0200)]
object-file: use unsigned arithmetic with bit mask
33f379eee6 (make object_directory.loose_objects_subdir_seen a bitmap,
2021-07-07) replaced a wasteful 256-byte array with a 32-byte array
and bit operations. The mask calculation shifts a literal 1 of type
int left by anything between 0 and 31. UndefinedBehaviorSanitizer
doesn't like that and reports:
object-file.c:2477:18: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Make sure to use an unsigned 1 instead to avoid the issue.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Fri, 6 Aug 2021 01:45:23 +0000 (18:45 -0700)]
Revert 'diff-merges: let "-m" imply "-p"'
This reverts commit f5bfcc823ba242a46e20fb6f71c9fbf7ebb222fe, which
made "git log -m" imply "--patch" by default. The logic was that
"-m", which makes diff generation for merges perform a diff against
each parent, has no use unless I am viewing the diff, so we could save
the user some typing by turning on display of the resulting diff
automatically. That wasn't expected to adversely affect scripts
because scripts would either be using a command like "git diff-tree"
that already emits diffs by default or would be combining -m with a
diff generation option such as --name-status. By saving typing for
interactive use without adversely affecting scripts in the wild, it
would be a pure improvement.
The problem is that although diff generation options are only relevant
for the displayed diff, a script author can imagine them affecting
path limiting. For example, I might run
git log -w --format=%H -- README
hoping to list commits that edited README, excluding whitespace-only
changes. In fact, a whitespace-only change is not TREESAME so the use
of -w here has no effect (since we don't apply these diff generation
flags to the diff_options struct rev_info::pruning used for this
purpose), but the documentation suggests that it should work
Suppose you specified foo as the <paths>. We shall call
commits that modify foo !TREESAME, and the rest TREESAME. (In
a diff filtered for foo, they look different and equal,
respectively.)
and a script author who has not tested whitespace-only changes
wouldn't notice.
Similarly, a script author could include
git log -m --first-parent --format=%H -- README
to filter the first-parent history for commits that modified README.
The -m is a no-op but it reflects the script author's intent. For
example, until 1e20a407fe2 (stash list: stop passing "-m" to "git
log", 2021-05-21), "git stash list" did this.
As a result, we can't safely change "-m" to imply "-p" without fear of
breaking such scripts. Restore the previous behavior.
Noticed because Rust's src/bootstrap/bootstrap.py made use of this
same construct: https://github.com/rust-lang/rust/pull/87513. That
script has been updated to omit the unnecessary "-m" option, but we
can expect other scripts in the wild to have similar expectations.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduces a KHASH_INIT invocation with a trailing ';', which while
commonly expected will trigger warnings with pedantic on both
clang[-Wextra-semi] and gcc[-Wpedantic], because that macro has already
a semicolon and is meant to be invoked without one.
while fixing the macro would be a worthy solution (specially considering
this is a common recurring problem), remove the extra ';' for now to
minimize churn.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows rmdir() equivalent behaves differently from POSIX ones in
that when used on a symbolic link that points at a directory, the
target directory gets removed, which has been corrected.
* tb/mingw-rmdir-symlink-to-directory:
mingw: align symlinks-related rmdir() behavior with Linux
Junio C Hamano [Wed, 4 Aug 2021 20:28:54 +0000 (13:28 -0700)]
Merge branch 'en/ort-perf-batch-14'
Further optimization on "merge -sort" backend.
* en/ort-perf-batch-14:
merge-ort: restart merge with cached renames to reduce process entry cost
merge-ort: avoid recursing into directories when we don't need to
merge-ort: defer recursing into directories when merge base is matched
merge-ort: add a handle_deferred_entries() helper function
merge-ort: add data structures for allowable trivial directory resolves
merge-ort: add some more explanations in collect_merge_info_callback()
merge-ort: resolve paths early when we have sufficient information
Junio C Hamano [Wed, 4 Aug 2021 20:28:52 +0000 (13:28 -0700)]
Merge branch 'ah/plugleaks'
Leak plugging.
* ah/plugleaks:
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
ref-filter: also free head for ATOM_HEAD to avoid leak
diffcore-rename: move old_dir/new_dir definition to plug leak
builtin/for-each-repo: remove unnecessary argv copy to plug leak
builtin/submodule--helper: release unused strbuf to avoid leak
environment: move strbuf into block to plug leak
fmt-merge-msg: free newly allocated temporary strings when done
Junio C Hamano [Wed, 4 Aug 2021 20:28:52 +0000 (13:28 -0700)]
Merge branch 'ar/submodule-add'
Rewrite of "git submodule" in C continues.
* ar/submodule-add:
submodule: drop unused sm_name parameter from show_fetch_remotes()
submodule--helper: introduce add-clone subcommand
submodule--helper: refactor module_clone()
submodule: prefix die messages with 'fatal'
t7400: test failure to add submodule in tracked path
Bagas Sanjaya [Wed, 4 Aug 2021 12:24:20 +0000 (19:24 +0700)]
diff: --pickaxe-all typofix
When I was fixing fuzzies as I updating po/id.po for 2.33.0 l10n round,
I noticed a triple-dash typo (--pickaxe-all) at diff.c, which according
to git-diff(1) manpage, the correct option name should be --pickaxe-all.
Fix the typo.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
