Alban Gruin [Fri, 10 Aug 2018 16:51:28 +0000 (18:51 +0200)]
sequencer: make three functions and an enum from sequencer.c public
This makes rebase_path_todo(), get_missing_commit_check_level(),
write_message() and the enum check_level accessible outside sequencer.c,
renames check_level to missing_commit_check_level, and prefixes its
value names by MISSING_COMMIT_ to avoid namespace pollution.
This function and this enum will eventually be moved to
rebase-interactive.c and become static again, so no special attention
was given to the naming.
This will be needed for the rewrite of append_todo_help() from shell to
C, as it will be in a new library source file, rebase-interactive.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 10 Aug 2018 14:09:08 +0000 (10:09 -0400)]
t5552: suppress upload-pack trace output
The t5552 test script uses GIT_TRACE_PACKET to monitor what
git-fetch sends and receives. However, because we're
accessing a local repository, the child upload-pack also
sends trace output to the same file.
On Linux, this works out OK. We open the trace file with
O_APPEND, so all writes are atomically positioned at the end
of the file. No data can be overwritten or omitted. And
since we prepare our small writes in a strbuf and write them
with a single write(), we should see each line as an atomic
unit. The order of lines between the two processes is
undefined, but the test script greps only for "fetch>" or
"fetch<" lines. So under Linux, the test results are
deterministic.
The test fails intermittently on Windows, however,
reportedly even overwriting bits of the output file (i.e.,
O_APPEND does not seem to give us an atomic position+write).
Since the test only cares about the trace output from fetch,
we can just disable the output from upload-pack. That
doesn't solve the greater question of O_APPEND/trace issues
under Windows, but it easily fixes the flakiness from this
test.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Aug 2018 18:40:27 +0000 (11:40 -0700)]
gpg-interface: propagate exit status from gpg back to the callers
When gpg-interface API unified support for signature verification
codepaths for signed tags and signed commits in mid 2015 at around
v2.6.0-rc0~114, we accidentally loosened the GPG signature
verification.
Before that change, signed commits were verified by looking for
"G"ood signature from GPG, while ignoring the exit status of "gpg
--verify" process, while signed tags were verified by simply passing
the exit status of "gpg --verify" through. The unified code we
currently have ignores the exit status of "gpg --verify" and returns
successful verification when the signature matches an unexpired key
regardless of the trust placed on the key (i.e. in addition to "G"ood
ones, we accept "U"ntrusted ones).
Make these commands signal failure with their exit status when
underlying "gpg --verify" (or the custom command specified by
"gpg.program" configuration variable) does so. This essentially
changes their behaviour in a backward incompatible way to reject
signatures that have been made with untrusted keys even if they
correctly verify, as that is how "gpg --verify" behaves.
Note that the code still overrides a zero exit status obtained from
"gpg" (or gpg.program) if the output does not say the signature is
good or computes correctly but made with untrusted keys, to catch
a poorly written wrapper around "gpg" the user may give us.
We could exclude "U"ntrusted support from this fallback code, but
that would be making two backward incompatible changes in a single
commit, so let's avoid that for now. A follow-up change could do so
if desired.
Helped-by: Vojtech Myslivec <vojtech.myslivec@nic.cz> Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 8 Aug 2018 22:34:06 +0000 (15:34 -0700)]
repack: repack promisor objects if -a or -A is set
Currently, repack does not touch promisor packfiles at all, potentially
causing the performance of repositories that have many such packfiles to
drop. Therefore, repack all promisor objects if invoked with -a or -A.
This is done by an additional invocation of pack-objects on all promisor
objects individually given, which takes care of deduplication and allows
the resulting packfiles to respect flags such as --max-pack-size.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 8 Aug 2018 22:34:05 +0000 (15:34 -0700)]
repack: refactor setup of pack-objects cmd
A subsequent patch will teach repack to run pack-objects with some same
and some different arguments if repacking of promisor objects is
required. Refactor the setup of the pack-objects cmd so that setting up
the arguments common to both is done in a function.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of `--exec` is to append an `exec` call after each `pick`.
Since the introduction of fixup!/squash! commits, this idea was extended
to apply to "pick, possibly followed by a fixup/squash chain", i.e. an
exec would not be inserted between a `pick` and any of its corresponding
`fixup` or `squash` lines.
The current implementation uses a dirty trick to achieve that: it
assumes that there are only pick/fixup/squash commands, and then
*inserts* the `exec` lines before any `pick` but the first, and appends
a final one.
With the todo lists generated by `git rebase --rebase-merges`, this
simple implementation shows its problems: it produces the exact wrong
thing when there are `label`, `reset` and `merge` commands.
Let's change the implementation to do exactly what we want: look for
`pick` lines, skip any fixup/squash chains, and then insert the `exec`
line. Lather, rinse, repeat.
Note: we take pains to insert *before* comment lines whenever possible,
as empty commits are represented by commented-out pick lines (and we
want to insert a preceding pick's exec line *before* such a line, not
afterward).
While at it, also add `exec` lines after `merge` commands, because they
are similar in spirit to `pick` commands: they add new commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sideband: highlight keywords in remote sideband output
The colorization is controlled with the config setting "color.remote".
Supported keywords are "error", "warning", "hint" and "success". They
are highlighted if they appear at the start of the line, which is
common in error messages, eg.
ERROR: commit is missing Change-Id
The Git push process itself prints lots of non-actionable messages
(eg. bandwidth statistics, object counters for different phases of the
process). This obscures actionable error messages that servers may
send back. Highlighting keywords in the sideband draws more attention
to those messages.
The background for this change is that Gerrit does server-side
processing to create or update code reviews, and actionable error
messages (eg. missing Change-Id) must be communicated back to the user
during the push. User research has shown that new users have trouble
seeing these messages.
The highlighting is done on the client rather than server side, so
servers don't have to grow capabilities to understand terminal escape
codes and terminal state. It also consistent with the current state
where Git is control of the local display (eg. prefixing messages with
"remote: ").
The highlighting can be configured using color.remote.<KEYWORD>
configuration settings. Since the keys are matched case insensitively,
we match the keywords case insensitively too.
Finally, this solution is backwards compatible: many servers already
prefix their messages with "error", and they will benefit from this
change without requiring a server update. By contrast, a server-side
solution would likely require plumbing the TERM variable through the
git protocol, so it would require changes to both server and client.
Helped-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 8 Aug 2018 21:35:18 +0000 (14:35 -0700)]
update-index: there no longer is `apply --index-info`
Back when we removed `git apply --index-info` in 2007, we forgot to
adjust the documentation for update-index that reads its output.
Let's reorder the description of three formats to present the other
two formats that are still generated by git commands before this
format, and stop mentioning `git apply --index-info`.
Elijah Newren [Wed, 8 Aug 2018 20:28:07 +0000 (13:28 -0700)]
git-update-index.txt: reword possibly confusing example
The following phrase could be interpreted multiple ways:
"To pretend you have a file with mode and sha1 at path"
In particular, I can think of two:
1. Pretend we have some new file, which happens to have a given mode
and sha1
2. Pretend one of the files we are already tracking has a different
mode and sha1 than what it really does
I think people could easily assume either case while reading, but the
example command provided doesn't actually handle the first case, which
caused some minor frustration to at least one user. Modify the example
command so that it correctly handles both cases, and re-order the
wording in a way that makes it more likely folks will assume the first
interpretation. I believe the new example shouldn't pose any obstacles
to those wanting the second interpretation (at worst, they pass an
unnecessary extra flag).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Wed, 8 Aug 2018 19:50:20 +0000 (12:50 -0700)]
git-config: document accidental multi-line setting in deprecated syntax
The bug was noticed when writing the previous patch; a fix for this bug
is not easy though: If we choose to ignore the case of the subsection
(and revert most of the code of the previous patch, just keeping
s/strncasecmp/strcmp/), then we'd introduce new sections using the
new syntax, such that
which is even more confusing. A proper fix would replace the first
occurrence of 'key'. As the syntax is deprecated, let's prefer to not
spend time on fixing the behavior and just document it instead.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Wed, 8 Aug 2018 19:50:19 +0000 (12:50 -0700)]
config: fix case sensitive subsection names on writing
A user reported a submodule issue regarding a section mix-up,
but it could be boiled down to the following test case:
$ git init test && cd test
$ git config foo."Bar".key test
$ git config foo."bar".key test
$ tail -n 3 .git/config
[foo "Bar"]
key = test
key = test
Sub sections are case sensitive and we have a test for correctly reading
them. However we do not have a test for writing out config correctly with
case sensitive subsection names, which is why this went unnoticed in 6ae996f2acf (git_config_set: make use of the config parser's event
stream, 2018-04-09)
Unfortunately we have to make a distinction between old style configuration
that looks like
[foo.Bar]
key = test
and the new quoted style as seen above. The old style is documented as
case-agnostic, hence we need to keep 'strncasecmp'; although the
resulting setting for the old style config differs from the configuration.
That will be fixed in a follow up patch.
Reported-by: JP Sugarbroad <jpsugar@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 8 Aug 2018 16:31:06 +0000 (09:31 -0700)]
t7406: prefer test_* helper functions to test -[feds]
test -e, test -s, etc. do not provide nice error messages when we hit
test failures, so use the test_* helper functions from
test-lib-functions.sh.
Also, add test_path_exists() to test-lib-function.sh while at it, so
that we don't need to worry whether submodule/.git is a file or a
directory. It currently is a file with contents of the form
gitdir: ../.git/modules/submodule
but it could be changed in the future to be a directory; this test
only really cares that it exists.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 8 Aug 2018 16:31:05 +0000 (09:31 -0700)]
t7406: avoid having git commands upstream of a pipe
When a git command is on the left side of a pipe, the pipe will swallow
its exit status, preventing us from detecting failures in said commands.
Restructure the tests to put the output in a temporary file to avoid
this problem.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 8 Aug 2018 16:31:04 +0000 (09:31 -0700)]
t7406: simplify by using diff --name-only instead of diff --raw
We can get rid of some quoted tabs and make a few tests slightly easier
to read and edit by just asking for the names of the files modified,
since that's all these tests were interested in anyway.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 8 Aug 2018 16:31:03 +0000 (09:31 -0700)]
t7406: fix call that was failing for the wrong reason
A test making use of test_must_fail was failing like this:
fatal: ambiguous argument '|': unknown revision or path not in the working tree.
when the intent was to verify that a specific string was not found
in the output of the git diff command, i.e. that grep returned
non-zero. Fix the test to do that.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The words "save" and "safe" are both very wonderful words, each with
their own set of meanings. Let's not confuse them with one another save
on occasion of a pun.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-instaweb: fix apache2 config with apache >= 2.4
The generated apache2 config fails with apache >= 2.4. The error log
states:
AH00136: Server MUST relinquish startup privileges before accepting
connections. Please ensure mod_unixd or other system security
module is loaded.
AH00016: Configuration Failed
Fix this by loading the unixd module. This works with older httpd as
well, so no IfVersion conditional is needed. (Tested with httpd-2.2.15
on CentOS-6.)
Written with assistance of Todd Zullinger <tmz@pobox.com>
Signed-off-by: Sebastian Kisela <skisela@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-instaweb: support Fedora/Red Hat apache module path
On Fedora-derived systems, the apache httpd package installs modules
under /usr/lib{,64}/httpd/modules, depending on whether the system is
32- or 64-bit. A symlink from /etc/httpd/modules is created which
points to the proper module path. Use it to support apache on Fedora,
CentOS, and Red Hat systems.
Written with assistance of Todd Zullinger <tmz@pobox.com> and
Junio C Hamano <gitster@pobox.com>.
Signed-off-by: Sebastian Kisela <skisela@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Tue, 7 Aug 2018 09:34:52 +0000 (10:34 +0100)]
sequencer: fix quoting in write_author_script
Single quotes should be escaped as \' not \\'. The bad quoting breaks
the interactive version of 'rebase --root' (which is used when there
is no '--onto' even if the user does not specify --interactive) for
authors that contain "'" as sq_dequote() called by read_author_ident()
errors out on the bad quoting.
For other interactive rebases this only affects external scripts that
read the author script and users whose git is upgraded from the shell
version of rebase -i while rebase was stopped when the author contains
"'". This is because the parsing in read_env_script() expected the
broken quoting.
This patch includes code to handle the broken quoting when
git has been upgraded while rebase was stopped. It does this by
detecting the missing "'" at the end of the GIT_AUTHOR_DATE line to see
if it should dequote \\' as "'". Note this is only implemented for
normal picks, not for creating a new root commit (rebase will stop with
an error complaining out bad quoting in that case).
The fallback code has been manually tested by reverting both the quoting
fixes in write_author_script() and the previous fix for the missing "'"
at the end of the GIT_AUTHOR_DATE line and running
t3404-rebase-interactive.sh.
Ideally rebase and am would share the same code for reading and
writing the author script, but this commit just fixes the immediate
bug.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Tue, 7 Aug 2018 09:34:51 +0000 (10:34 +0100)]
sequencer: handle errors from read_author_ident()
Check for a NULL return value from read_author_ident() that indicates
an error. Previously the NULL author was passed to commit_tree() which
would then fallback to using the default author when creating the new
commit. This changed the date and potentially the author of the commit
which corrupted the author data compared to its expected value.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sat, 4 Aug 2018 08:52:47 +0000 (01:52 -0700)]
doc hash-function-transition: pick SHA-256 as NewHash
From a security perspective, it seems that SHA-256, BLAKE2, SHA3-256,
K12, and so on are all believed to have similar security properties.
All are good options from a security point of view.
SHA-256 has a number of advantages:
* It has been around for a while, is widely used, and is supported by
just about every single crypto library (OpenSSL, mbedTLS, CryptoNG,
SecureTransport, etc).
* When you compare against SHA1DC, most vectorized SHA-256
implementations are indeed faster, even without acceleration.
* If we're doing signatures with OpenPGP (or even, I suppose, CMS),
we're going to be using SHA-2, so it doesn't make sense to have our
security depend on two separate algorithms when either one of them
alone could break the security when we could just depend on one.
So SHA-256 it is. Update the hash-function-transition design doc to
say so.
After this patch, there are no remaining instances of the string
"NewHash", except for an unrelated use from 2008 as a variable name in
t/t9700/test.pl.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: brian m. carlson <sandals@crustytoothpaste.net> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Acked-by: Dan Shumow <danshu@microsoft.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
William Chargin [Mon, 6 Aug 2018 18:35:08 +0000 (11:35 -0700)]
t: factor out FUNNYNAMES as shared lazy prereq
A fair number of tests need to check that the filesystem supports file
names including "funny" characters, like newline, tab, and double-quote.
Jonathan Nieder suggested that this be extracted into a lazy prereq in
the top-level `test-lib.sh`. This patch effects that change.
The FUNNYNAMES prereq now uniformly requires support for newlines, tabs,
and double-quotes in filenames. This very slightly decreases the power
of some tests, which might have run previously on a system that supports
(e.g.) newlines and tabs but not double-quotes, but now will not. This
seems to me like an acceptable tradeoff for consistency.
One test (`t/t9902-completion.sh`) defined FUNNYNAMES to further require
the separators \034 through \037, the test for which was implemented
using the Bash-specific $'\034' syntax. I've elected to leave this one
as is, renaming it to FUNNIERNAMES.
After this patch, `git grep 'test_\(set\|lazy\)_prereq.*FUNNYNAMES'` has
only one result.
Signed-off-by: William Chargin <wchargin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: add missing dependency for command-list.h
Commit 3ac68a93fd (help: add --config to list all available config -
2018-05-26) makes generate-cmdlist.sh adds a new input source
config.txt but it's not a Makefile dependency. Any changes in
config.txt will not trigger command-list.h regeneration and the config
list in this file becomes outdated. Correct the dependency.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Sun, 5 Aug 2018 17:20:37 +0000 (18:20 +0100)]
rerere: recalculate conflict ID when unresolved conflict is committed
Currently when a user doesn't resolve a conflict, commits the results,
and does an operation which creates another conflict, rerere will use
the ID of the previously unresolved conflict for the new conflict.
This is because the conflict is kept in the MERGE_RR file, which
'rerere' reads every time it is invoked.
After the new conflict is solved, rerere will record the resolution
with the ID of the old conflict. So in order to replay the conflict,
both merges would have to be re-done, instead of just the last one, in
order for rerere to be able to automatically resolve the conflict.
Instead of that, assign a new conflict ID if there are still conflicts
in a file and the file had conflicts at a previous step. This ID
matches the conflict we actually resolved at the corresponding step.
Note that there are no backwards compatibility worries here, as rerere
would have failed to even normalize the conflict before this patch
series.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Sun, 5 Aug 2018 17:20:36 +0000 (18:20 +0100)]
rerere: teach rerere to handle nested conflicts
Currently rerere can't handle nested conflicts and will error out when
it encounters such conflicts. Do that by recursively calling the
'handle_conflict' function to normalize the conflict.
Note that a conflict like this would only be produced if a user
commits a file with conflict markers, and gets a conflict including
that in a susbsequent operation.
The conflict ID calculation here deserves some explanation:
As we are using the same handle_conflict function, the nested conflict
is normalized the same way as for non-nested conflicts, which means
the ancestor in the diff3 case is stripped out, and the parts of the
conflict are ordered alphabetically.
The conflict ID is however is only calculated in the top level
handle_conflict call, so it will include the markers that 'rerere'
adds to the output. e.g. say there's the following conflict:
<<<<<<< HEAD
1
=======
<<<<<<< HEAD
3
=======
2
>>>>>>> branch-2
>>>>>>> branch-3~
Thomas Gummerer [Sun, 5 Aug 2018 17:20:35 +0000 (18:20 +0100)]
rerere: return strbuf from handle path
Currently we write the conflict to disk directly in the handle_path
function. To make it re-usable for nested conflicts, instead of
writing the conflict out directly, store it in a strbuf and let the
caller write it out.
This does mean some slight increase in memory usage, however that
increase is limited to the size of the largest conflict we've
currently processed. We already keep one copy of the conflict in
memory, and it shouldn't be too large, so the increase in memory usage
seems acceptable.
As a bonus this lets us get replace the rerere_io_putconflict function
with a trivial two line function.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Sun, 5 Aug 2018 17:20:34 +0000 (18:20 +0100)]
rerere: factor out handle_conflict function
Factor out the handle_conflict function, which handles a single
conflict in a path. This is in preparation for a subsequent commit,
where this function will be re-used.
Note that this does change the behaviour of 'git rerere' slightly.
Where previously we'd consider all files where an unmatched conflict
marker is found as invalid, we now only consider files invalid when
the "ours" conflict marker ("<<<<<<< <text>") is unmatched, not when
other conflict markers (e.g. "=======") is unmatched.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Sun, 5 Aug 2018 17:20:33 +0000 (18:20 +0100)]
rerere: only return whether a path has conflicts or not
We currently return the exact number of conflict hunks a certain path
has from the 'handle_paths' function. However all of its callers only
care whether there are conflicts or not or if there is an error.
Return only that information, and document that only that information
is returned. This will simplify the code in the subsequent steps.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Sun, 5 Aug 2018 17:20:32 +0000 (18:20 +0100)]
rerere: fix crash with files rerere can't handle
Currently when a user does a conflict resolution and ends it (in any
way that calls 'git rerere' again) with a file 'rerere' can't handle,
subsequent rerere operations that are interested in that path, such as
'rerere clear' or 'rerere forget <path>' will fail, or even worse in
the case of 'rerere clear' segfault.
Such states include nested conflicts, or a conflict marker that
doesn't have any match.
This is because 'git rerere' calculates a conflict file and writes it
to the MERGE_RR file. When the user then changes the file in any way
rerere can't handle, and then calls 'git rerere' on it again to record
the conflict resolution, the handle_file function fails, and removes
the 'preimage' file in the rr-cache in the process, while leaving the
ID in the MERGE_RR file.
Now when 'rerere clear' is run, it reads the ID from the MERGE_RR
file, however the 'fit_variant' function for the ID is never called as
the 'preimage' file does not exist anymore. This means
'collection->status' in 'has_rerere_resolution' is NULL, and the
command will crash.
To fix this, remove the rerere ID from the MERGE_RR file in the case
when we can't handle it, just after the 'preimage' file was removed
and remove the corresponding variant from .git/rr-cache/. Removing it
unconditionally is fine here, because if the user would have resolved
the conflict and ran rerere, the entry would no longer be in the
MERGE_RR file, so we wouldn't have this problem in the first place,
while if the conflict was not resolved.
Currently there is nothing left in this folder, as the 'preimage'
was already deleted by the 'handle_file' function, so 'remove_variant'
is a no-op. Still call the function, to make sure we clean everything
up, in case we add some other files corresponding to a variant in the
future.
Note that other variants that have the same conflict ID will not be
touched.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Sun, 5 Aug 2018 17:20:30 +0000 (18:20 +0100)]
rerere: mark strings for translation
'git rerere' is considered a porcelain command and as such its output
should be translated. Its functionality is also only enabled through
a config setting, so scripts really shouldn't rely on the output
either way.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Mon, 6 Aug 2018 17:49:38 +0000 (19:49 +0200)]
t4150: fix broken test for am --scissors
Tests for "git am --[no-]scissors" [1] work in the following way:
1. Create files with commit messages
2. Use these files to create expected commits
3. Generate eml file with patch from expected commits
4. Create commits using git am with these eml files
5. Compare these commits with expected
The test for "git am --scissors" is supposed to take an e-mail with a
scissors line and in-body "Subject:" header and demonstrate that the
subject line from the e-mail itself is overridden by the in-body header
and that only text below the scissors line is included in the commit
message of the commit created by the invocation of "git am --scissors".
However, the setup of the test incorrectly uses a commit without the
scissors line and without the in-body header in the commit message,
producing eml file not suitable for testing of "git am --scissors".
This can be checked by intentionally breaking is_scissors_line function
in mailinfo.c, for example, by changing string ">8", which is used by
the test. With such change the test should fail, but does not.
Fix broken test by generating eml file with scissors line and in-body
header "Subject:". Since the two tests for --scissors and --no-scissors
options are there to test cutting or keeping the commit message, update
both tests to change the test file in the same way, which allows us to
generate only one eml file to be passed to git am. To clarify the
intention of the test, give files and tags more explicit names.
[1]: introduced in bf72ac17d (t4150: tests for am --[no-]scissors,
2015-07-19)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Reviewed-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Mon, 6 Aug 2018 19:31:11 +0000 (01:16 +0545)]
builtin/rebase: support running "git rebase <upstream>"
This patch gives life to the skeleton added in the previous patches:
With this change, we can perform a elementary rebase (without any
options).
It can be tested thusly by:
git -c rebase.usebuiltin=true rebase HEAD~2
The rebase backends (i.e. the shell script functions defined in
`git-rebase--<backend>`) are still at work here and the "builtin
rebase"'s purpose is simply to parse the options and set
everything up so that those rebase backends can do their work.
Note: We take an alternative approach here which is *not* to set the
environment variables via `run_command_v_opt_cd_env()` because those
variables would then be visible by processes spawned from the rebase
backends. Instead, we work hard to set them in the shell script snippet.
On Windows, some of the tests fail merely due to core.fileMode not
being heeded that's why the core.*config variables is parsed here.
The `reset_head()` function is currently only used to detach the HEAD
to onto by way of starting the rebase, but it offers additional
functionality that subsequent patches will need like moving to the
original branch (possibly updating it) and also to do the equivalent of
`git reset --hard`.
The next commits will handle and support all the wonderful rebase
options.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Mon, 6 Aug 2018 19:31:10 +0000 (01:16 +0545)]
rebase: refactor common shell functions into their own file
The functions present in `git-legacy-rebase.sh` are used by the rebase
backends as they are implemented as shell script functions in the
`git-rebase--<backend>` files.
To make the `builtin/rebase.c` work, we have to provide support via
a Unix shell script snippet that uses these functions and so, we
want to use the rebase backends *directly* from the builtin rebase
without going through `git-legacy-rebase.sh`.
This commit extracts the functions to a separate file,
`git-rebase--common`, that will be read by `git-legacy-rebase.sh` and
by the shell script snippets which will be used extensively in the
following commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Mon, 6 Aug 2018 19:31:09 +0000 (01:16 +0545)]
rebase: start implementing it as a builtin
This commit imitates the strategy that was used to convert the
difftool to a builtin. We start by renaming the shell script
`git-rebase.sh` to `git-legacy-rebase.sh` and introduce a
`builtin/rebase.c` that simply executes the shell script version,
unless the config setting `rebase.useBuiltin` is set to `true`.
The motivation behind this is to rewrite all the functionality of the
shell script version in the aforementioned `rebase.c`, one by one and
be able to conveniently test new features by configuring
`rebase.useBuiltin`.
In the original difftool conversion, if sane_execvp() that attempts to
run the legacy scripted version returned with non-negative status, the
command silently exited without doing anything with success, but
sane_execvp() should not return with non-negative status in the first
place, so we use die() to notice such an abnormal case.
We intentionally avoid reading the config directly to avoid
messing up the GIT_* environment variables when we need to fall back to
exec()ing the shell script. The test of builtin rebase can be done by
`git -c rebase.useBuiltin=true rebase ...`
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull --rebase=<type>: allow single-letter abbreviations for the type
Git for Windows' original 4aa8b8c8283 (Teach 'git pull' to handle
--rebase=interactive, 2011-10-21) had support for the very convenient
abbreviation
git pull --rebase=i
which was later lost when it was ported to the builtin `git pull`, and
it was not introduced before the patch eventually made it into Git as f5eb87b98dd (pull: allow interactive rebase with --rebase=interactive,
2016-01-13).
However, it is *really* a useful short hand for the occasional rebasing
pull on branches that do not usually want to be rebased.
So let's reintroduce this convenience, at long last.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 6 Aug 2018 17:37:20 +0000 (13:37 -0400)]
add a script to diff rendered documentation
After making a change to the documentation, it's easy to
forget to check the rendered version to make sure it was
formatted as you intended. And simply doing a diff between
the two built versions is less trivial than you might hope:
- diffing the roff or html output isn't particularly
readable; what we really care about is what the end user
will see
- you have to tweak a few build variables to avoid
spurious differences (e.g., version numbers, build
times)
Let's provide a script that builds and installs the manpages
for two commits, renders the results using "man", and diffs
the result. Since this is time-consuming, we'll also do our
best to avoid repeated work, keeping intermediate results
between runs.
Some of this could probably be made a little less ugly if we
built support into Documentation/Makefile. But by relying
only on "make install-man" working, this script should work
for generating a diff between any two versions, whether they
include this script or not.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.txt: reorder blame stuff to keep config keys sorted
The color group in config.txt is actually sorted but changes in
sb/blame-color broke this. Reorder color.blame.* and move
blame.coloring back to the rest of blame.* (and reorder that group too
while we're there)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Fri, 3 Aug 2018 23:09:23 +0000 (16:09 -0700)]
t3031: update test description to mention desired behavior
This test description looks like it was written with the originally
observed behavior ("causes segfault") rather than the desired and now
current behavior ("does not cause segfault"). Fix it.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Fri, 3 Aug 2018 22:23:19 +0000 (15:23 -0700)]
builtin/submodule--helper: store update_clone information in a struct
The information that is printed for update_submodules in
'submodule--helper update-clone' and consumed by 'git submodule update'
is stored as a string per submodule. This made sense at the time of 48308681b07 (git submodule update: have a dedicated helper for cloning,
2016-02-29), but as we want to migrate the rest of the submodule update
into C, we're better off having access to the raw information in a helper
struct.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Fri, 3 Aug 2018 22:23:18 +0000 (15:23 -0700)]
builtin/submodule--helper: factor out submodule updating
Separate the command line parsing from the actual execution of the command
within the repository. For now there is not a lot of execution as
most of it is still in git-submodule.sh.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Fri, 3 Aug 2018 22:23:17 +0000 (15:23 -0700)]
git-submodule.sh: rename unused variables
The 'mode' variable is not used in cmd_update for its original purpose,
rename it to 'dummy' as it only serves the purpose to abort quickly
documenting this knowledge.
The variable 'stage' is also not used any more in cmd_update, so remove it.
This went unnoticed as first each function used the commonly used
submodule listing, which was converted in 74703a1e4df (submodule: rewrite
`module_list` shell function in C, 2015-09-02). When cmd_update was
using its own function starting in 48308681b07 (git submodule update:
have a dedicated helper for cloning, 2016-02-29), its removal was missed.
A later patch in this series also touches the communication between
the submodule helper and git-submodule.sh, but let's have this as
a preparatory patch, as it eases the next patch, which stores the
raw data instead of the line printed for this communication.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Fri, 3 Aug 2018 06:07:49 +0000 (23:07 -0700)]
color: protect against out-of-bounds reads and writes
want_color_fd() is designed to work only with standard output and
error file descriptors and stores information about each descriptor in
an array. However, it doesn't verify that the passed-in descriptor
lives within that set, which, with a buggy caller, could lead to
access or assignment outside the array bounds.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parseopt wraps argument help strings in a pair of angular brackets by
default, to tell users that they need to replace it with an actual
value. This is useful in most cases, because most option arguments
are indeed single values of a certain type. The option
PARSE_OPT_LITERAL_ARGHELP needs to be used in option definitions with
arguments that have multiple parts or are literal strings.
Stop adding these angular brackets if special characters are present,
as they indicate that we don't deal with a simple placeholder. This
simplifies the code a bit and makes defining special options slightly
easier.
Remove the flag PARSE_OPT_LITERAL_ARGHELP in the cases where the new
and more cautious handling suffices.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 2 Aug 2018 19:18:06 +0000 (21:18 +0200)]
shortlog: correct option help for -w
Wrap the placeholders in the option help string for -w in pairs of
angular brackets to document that users need to replace them with actual
numbers. Use the flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt
from adding another pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 2 Aug 2018 19:17:58 +0000 (21:17 +0200)]
send-pack: specify --force-with-lease argument help explicitly
Wrap each part of the argument help string in angular brackets to show
that users need to replace them with actual values. Do that explicitly
to balance the pairs nicely in the code and avoid confusing casual
readers. Add the flag PARSE_OPT_LITERAL_ARGHELP to keep parseopt from
adding another pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 2 Aug 2018 19:17:50 +0000 (21:17 +0200)]
pack-objects: specify --index-version argument help explicitly
Wrap both placeholders in the argument help string in angular brackets
to signal that users needs replace them with some actual value. Use the
flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt from adding another
pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 2 Aug 2018 19:17:43 +0000 (21:17 +0200)]
difftool: remove angular brackets from argument help
Parseopt wraps arguments in a pair of angular brackets by default,
signifying that the user needs to replace it with a value of the
documented type. Remove the pairs from the option definitions to
duplication and confusion.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 2 Aug 2018 19:17:35 +0000 (21:17 +0200)]
add, update-index: fix --chmod argument help
Don't translate the argument specification for --chmod; "+x" and "-x"
are the literal strings that the commands accept.
Separate alternatives using a pipe character instead of a slash, for
consistency.
Use the flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt from adding a
pair of angular brackets around the argument help string, as that would
wrongly indicate that users need to replace the literal strings with
some kind of value.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
which comes from having N_("refname>:<expect") as the argument help
text in the source code, with an aparent lack of "<" and ">" at both
ends.
It turns out that parse-options machinery takes the whole string and
encloses it inside a pair of "<>", to make it easier for majority
cases that uses a single token placeholder.
The help string was written in a funnily unbalanced way knowing that
the end result would balance out, by somebody who forgot the
presence of PARSE_OPT_LITERAL_ARGHELP, which is the escape hatch
mechanism designed to help such a case. We just should use the
official escape hatch instead.
Because ":<expect>" part can be omitted to ask Git to guess, it may
be more correct to spell it as "<refname>[:<expect>]", but that is
not the focus of this topic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 2 Aug 2018 22:30:46 +0000 (15:30 -0700)]
Merge branch 'es/chain-lint-in-subshell'
Look for broken "&&" chains that are hidden in subshell, many of
which have been found and corrected.
* es/chain-lint-in-subshell:
t/chainlint.sed: drop extra spaces from regex character class
t/chainlint: add chainlint "specialized" test cases
t/chainlint: add chainlint "complex" test cases
t/chainlint: add chainlint "cuddled" test cases
t/chainlint: add chainlint "loop" and "conditional" test cases
t/chainlint: add chainlint "nested subshell" test cases
t/chainlint: add chainlint "one-liner" test cases
t/chainlint: add chainlint "whitespace" test cases
t/chainlint: add chainlint "basic" test cases
t/Makefile: add machinery to check correctness of chainlint.sed
t/test-lib: teach --chain-lint to detect broken &&-chains in subshells
Junio C Hamano [Thu, 2 Aug 2018 22:30:46 +0000 (15:30 -0700)]
Merge branch 'jt/fetch-negotiator-skipping'
Add a server-side knob to skip commits in exponential/fibbonacci
stride in an attempt to cover wider swath of history with a smaller
number of iterations, potentially accepting a larger packfile
transfer, instead of going back one commit a time during common
ancestor discovery during the "git fetch" transaction.
* jt/fetch-negotiator-skipping:
negotiator/skipping: skip commits during fetch
Junio C Hamano [Thu, 2 Aug 2018 22:30:46 +0000 (15:30 -0700)]
Merge branch 'jm/send-email-tls-auth-on-batch'
"git send-email" when using in a batched mode that limits the
number of messages sent in a single SMTP session lost the contents
of the variable used to choose between tls/ssl, unable to send the
second and later batches, which has been fixed.
* jm/send-email-tls-auth-on-batch:
send-email: fix tls AUTH when sending batch
"git rebase" started exporting GIT_DIR environment variable and
exposing it to hook scripts when part of it got rewritten in C.
Instead of matching the old scripted Porcelains' behaviour,
compensate by also exporting GIT_WORK_TREE environment as well to
lessen the damage. This can harm existing hooks that want to
operate on different repository, but the current behaviour is
already broken for them anyway.
* bc/sequencer-export-work-tree-as-well:
sequencer: pass absolute GIT_WORK_TREE to exec commands
Tests to cover conflict cases that involve submodules have been
added for merge-recursive.
* en/t7405-recursive-submodule-conflicts:
t7405: verify 'merge --abort' works after submodule/path conflicts
t7405: add a directory/submodule conflict
t7405: add a file/submodule conflict
Junio C Hamano [Thu, 2 Aug 2018 22:30:45 +0000 (15:30 -0700)]
Merge branch 'en/t6036-merge-recursive-tests'
Tests to cover various conflicting cases have been added for
merge-recursive.
* en/t6036-merge-recursive-tests:
t6036: add a failed conflict detection case: regular files, different modes
t6036: add a failed conflict detection case with conflicting types
t6036: add a failed conflict detection case with submodule add/add
t6036: add a failed conflict detection case with submodule modify/modify
t6036: add a failed conflict detection case with symlink add/add
t6036: add a failed conflict detection case with symlink modify/modify
Junio C Hamano [Thu, 2 Aug 2018 22:30:44 +0000 (15:30 -0700)]
Merge branch 'en/dirty-merge-fixes'
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
Junio C Hamano [Thu, 2 Aug 2018 22:30:44 +0000 (15:30 -0700)]
Merge branch 'js/rebase-merge-octopus'
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
Junio C Hamano [Thu, 2 Aug 2018 22:30:43 +0000 (15:30 -0700)]
Merge branch 'kg/gc-auto-windows-workaround'
"git gc --auto" opens file descriptors for the packfiles before
spawning "git repack/prune", which would upset Windows that does
not want a process to work on a file that is open by another
process. The issue has been worked around.
* kg/gc-auto-windows-workaround:
gc --auto: release pack files before auto packing
Junio C Hamano [Thu, 2 Aug 2018 22:30:43 +0000 (15:30 -0700)]
Merge branch 'jm/cache-entry-from-mem-pool'
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
Junio C Hamano [Thu, 2 Aug 2018 22:30:43 +0000 (15:30 -0700)]
Merge branch 'jt/fetch-nego-tip'
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
Junio C Hamano [Thu, 2 Aug 2018 22:30:41 +0000 (15:30 -0700)]
Merge branch 'jt/fetch-pack-negotiator'
Code restructuring and a small fix to transport protocol v2 during
fetching.
* jt/fetch-pack-negotiator:
fetch-pack: introduce negotiator API
fetch-pack: move common check and marking together
fetch-pack: make negotiation-related vars local
fetch-pack: use ref adv. to prune "have" sent
fetch-pack: directly end negotiation if ACK ready
fetch-pack: clear marks before re-marking
fetch-pack: split up everything_local()
Junio C Hamano [Thu, 2 Aug 2018 22:30:41 +0000 (15:30 -0700)]
Merge branch 'ab/checkout-default-remote'
"git checkout" and "git worktree add" learned to honor
checkout.defaultRemote when auto-vivifying a local branch out of a
remote tracking branch in a repository with multiple remotes that
have tracking branches that share the same names.
* ab/checkout-default-remote:
checkout & worktree: introduce checkout.defaultRemote
checkout: add advice for ambiguous "checkout <branch>"
builtin/checkout.c: use "ret" variable for return
checkout: pass the "num_matches" up to callers
checkout.c: change "unique" member to "num_matches"
checkout.c: introduce an *_INIT macro
checkout.h: wrap the arguments to unique_tracking_name()
checkout tests: index should be clean after dwim checkout
Junio C Hamano [Thu, 2 Aug 2018 22:30:40 +0000 (15:30 -0700)]
Merge branch 'sb/diff-color-move-more'
"git diff --color-moved" feature has further been tweaked.
* sb/diff-color-move-more:
diff.c: offer config option to control ws handling in move detection
diff.c: add white space mode to move detection that allows indent changes
diff.c: factor advance_or_nullify out of mark_color_as_moved
diff.c: decouple white space treatment from move detection algorithm
diff.c: add a blocks mode for moved code detection
diff.c: adjust hash function signature to match hashmap expectation
diff.c: do not pass diff options as keydata to hashmap
t4015: avoid git as a pipe input
xdiff/xdiffi.c: remove unneeded function declarations
xdiff/xdiff.h: remove unused flags
Junio C Hamano [Thu, 2 Aug 2018 22:30:39 +0000 (15:30 -0700)]
Merge branch 'jk/fsck-gitmodules-gently'
Recent "security fix" to pay attention to contents of ".gitmodules"
while accepting "git push" was a bit overly strict than necessary,
which has been adjusted.
* jk/fsck-gitmodules-gently:
fsck: downgrade gitmodulesParse default to "info"
fsck: split ".gitmodules too large" error from parse failure
fsck: silence stderr when parsing .gitmodules
config: add options parameter to git_config_from_mem
config: add CONFIG_ERROR_SILENT handler
config: turn die_on_error into caller-facing enum
Junio C Hamano [Thu, 2 Aug 2018 22:30:39 +0000 (15:30 -0700)]
Merge branch 'bc/object-id'
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
Junio C Hamano [Thu, 2 Aug 2018 22:30:37 +0000 (15:30 -0700)]
Merge branch 'jk/has-uncommitted-changes-fix'
"git pull --rebase" on a corrupt HEAD caused a segfault. In
general we substitute an empty tree object when running the in-core
equivalent of the diff-index command, and the codepath has been
corrected to do so as well to fix this issue.
* jk/has-uncommitted-changes-fix:
has_uncommitted_changes(): fall back to empty tree
Jeff King [Thu, 2 Aug 2018 18:58:21 +0000 (14:58 -0400)]
score_trees(): fix iteration over trees with missing entries
In score_trees(), we walk over two sorted trees to find
which entries are missing or have different content between
the two. So if we have two trees with these entries:
one two
--- ---
a a
b c
c d
we'd expect the loop to:
- compare "a" to "a"
- compare "b" to "c"; because these are sorted lists, we
know that the second tree does not have "b"
- compare "c" to "c"
- compare "d" to end-of-list; we know that the first tree
does not have "d"
And prior to d8febde370 (match-trees: simplify score_trees()
using tree_entry(), 2013-03-24) that worked. But after that
commit, we mistakenly increment the tree pointers for every
loop iteration, even when we've processed the entry for only
one side. As a result, we end up doing this:
- compare "a" to "a"
- compare "b" to "c"; we know that we do not have "b", but
we still increment both tree pointers; at this point
we're out of sync and all further comparisons are wrong
- compare "c" to "d" and mistakenly claim that the second
tree does not have "c"
- exit the loop, mistakenly not realizing that the first
tree does not have "d"
So contrary to the claim in d8febde370, we really do need to
manually use update_tree_entry(), because advancing the tree
pointer depends on the entry comparison.
That means we must stop using tree_entry() to access each
entry, since it auto-advances the pointer. Instead:
- we'll use tree_desc.size directly to know if there's
anything left to look at (which is what tree_entry() was
doing under the hood)
- rather than do an extra struct assignment to "e1" and
"e2", we can just access the "entry" field of tree_desc
directly
That makes us a little more intimate with the tree_desc
code, but that's not uncommon for its callers.
The included test shows off the bug by adding a new entry
"bar.t", which sorts early in the tree and de-syncs the
comparison for "foo.t", which comes after.
Reported-by: George Shammas <georgyo@gmail.com> Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Aug 2018 16:22:37 +0000 (09:22 -0700)]
remote: make refspec follow the same disambiguation rule as local refs
When matching a non-wildcard LHS of a refspec against a list of
refs, find_ref_by_name_abbrev() returns the first ref that matches
using any DWIM rules used by refname_match() in refs.c, even if a
better match occurs later in the list of refs.
This causes unexpected behavior when (for example) fetching using
the refspec "refs/heads/s:<something>" from a remote with both
"refs/heads/refs/heads/s" and "refs/heads/s"; even if the former was
inadvertently created, one would still expect the latter to be
fetched. Similarly, when both a tag T and a branch T exist,
fetching T should favor the tag, just like how local refname
disambiguation rule works. But because the code walks over
ls-remote output from the remote, which happens to be sorted in
alphabetical order and has refs/heads/T before refs/tags/T, a
request to fetch T is (mis)interpreted as fetching refs/heads/T.
Update refname_match(), all of whose current callers care only if it
returns non-zero (i.e. matches) to see if an abbreviated name can
mean the full name being tested, so that it returns a positive
integer whose magnitude can be used to tell the precedence, and fix
the find_ref_by_name_abbrev() function not to stop at the first
match but find the match with the highest precedence.
This is based on an earlier work, which special cased only the exact
matches, by Jonathan Tan.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
