]>
git.ipfire.org Git - ipfire-2.x.git/blob - src/initscripts/init.d/networking/red
f56cb21843cff2e152c364afae6559db7843f684
2 ########################################################################
5 # Description : RED Device Script
7 # Authors : Michael Tremer - mitch@ipfire.org
8 # Maniacikarus - maniacikarus@ipfire.org
9 # Inspired by : Nathan Coulson - nathan@linuxfromscratch.org
10 # Kevin P. Fleming - kpfleming@linuxfromscratch.org
16 ########################################################################
20 eval $
(/usr
/local
/bin
/readhash
/var
/ipfire
/ethernet
/settings
)
25 if [ "$TYPE" == "STATIC" ] ||
[ "$TYPE" == "DHCP" ]; then
26 if [ "$DEVICE" == "" ]; then
27 boot_mesg
"No device for red network. Please run setup." ${FAILURE}
29 [ "${1}" == "start" ] && exit 0
33 if [ "${TYPE}" == "STATIC" ]; then
34 if [ "${DEVICE}" != "${GREEN_DEV}" ]; then
35 ADDRESS
="${RED_ADDRESS}"
36 BROADCAST
="${RED_BROADCAST}"
37 NETADDRESS
="${RED_NETADDRESS}"
38 NETMASK
="${RED_NETMASK}"
40 ADDRESS
="${GREEN_ADDRESS}"
41 BROADCAST
="${GREEN_BROADCAST}"
42 NETADDRESS
="${GREEN_NETADDRESS}"
43 NETMASK
="${GREEN_NETMASK}"
45 GATEWAY
="${DEFAULT_GATEWAY}"
49 if [ -z "${BROADCAST}" ]; then
50 boot_mesg
"BROADCAST variable missing, cannot continue." ${FAILURE}
54 if [ -n "${ADDRESS}" -a -n "${NETMASK}" ]; then
55 PREFIX
=`whatmask ${NETMASK} | grep -e ^CIDR | awk -F': ' '{ print $2 }' | cut -c 2-`
56 args
="${args} ${ADDRESS}/${PREFIX} broadcast ${BROADCAST}"
58 boot_mesg
"ADDRESS and/or NETMASK variable missing from input, cannot continue." ${FAILURE}
63 elif [ "${TYPE}" == "DHCP" ]; then
65 PIDFILE
="/var/run/dhcpcd-${DEVICE}.pid"
66 LEASEINFO
="/var/ipfire/dhcpc/dhcpcd-${DEVICE}.info"
67 DHCP_START
="-N -R -L /var/ipfire/dhcpc -c /var/ipfire/dhcpc/dhcpcd.exe "
68 DHCP_STOP
="-k -c /var/ipfire/dhcpc/dhcpcd.exe "
74 if [ "${DEVICE}" != "${GREEN_DEV}" ] && [ "${DEVICE}" != "" ]; then
75 boot_mesg
"Bringing up the ${DEVICE} interface..."
77 # Check if an interface is there...
78 if ip link show
${DEVICE} > /dev
/null
2>&1; then
79 link_status
=`ip link show ${DEVICE} 2> /dev/null`
80 if [ -n "${link_status}" ]; then
81 if ! echo "${link_status}" |
grep -q UP
; then
82 ip link
set ${DEVICE} up
86 boot_mesg
"Interface ${DEVICE} doesn't exist." ${FAILURE}
92 if [ "${TYPE}" == "STATIC" ]; then
94 if [ "$DEVICE" != "${GREEN_DEV}" ]; then
95 boot_mesg
"Adding IPv4 address ${ADDRESS} to the ${DEVICE} interface..."
96 ip addr add
${args} dev
${DEVICE}
99 echo -n "${DEVICE}" > /var
/ipfire
/red
/iface
100 echo -n "${ADDRESS}" > /var
/ipfire
/red
/local-ipaddress
101 echo -n "${GATEWAY}" > /var
/ipfire
/red
/remote-ipaddress
102 echo -n "${DNS1}" > /var
/ipfire
/red
/dns1
103 echo -n "${DNS2}" > /var
/ipfire
/red
/dns2
104 touch /var
/ipfire
/red
/active
106 boot_mesg
"Setting up default gateway ${GATEWAY}..."
107 ip route add default via
${GATEWAY} dev
${DEVICE}
110 run_subdir
${rc_base}/init.d
/networking
/red.up
/
112 elif [ "${TYPE}" == "DHCP" ]; then
113 boot_mesg
-n "Starting dhcpcd on the ${DEVICE} interface..."
114 echo -n "${DEVICE}" > /var
/ipfire
/red
/iface
116 # Test to see if there is a stale pid file
117 if [ -f "$PIDFILE" ]; then
118 ps
`cat "$PIDFILE"` |
grep dhcpcd
> /dev
/null
120 rm -f /var
/run
/dhcpcd-
${DEVICE}.pid
> /dev
/null
122 boot_mesg
"dhcpcd already running!" ${WARNING}
128 iptables
-A REDINPUT
-p tcp
--source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
129 iptables
-A REDINPUT
-p udp
--source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
131 if [ -n "${RED_DHCP_HOSTNAME}" ]; then
132 DHCP_START
+="-h ${RED_DHCP_HOSTNAME} "
135 /sbin
/dhcpcd
${DEVICE} ${DHCP_START} >/dev
/null
2>&1
138 if [ "$RET" = "0" ]; then
139 .
/var
/ipfire
/dhcpc
/dhcpcd-
${DEVICE}.info
142 boot_mesg
" DHCP Assigned Settings for ${DEVICE}:"
144 boot_mesg
" IP Address: $IPADDR"
146 if [ -n "${RED_DHCP_HOSTNAME}" ]; then
147 boot_mesg
" Hostname: $RED_DHCP_HOSTNAME"
150 boot_mesg
" Subnet Mask: $NETMASK"
152 boot_mesg
" Default Gateway: $GATEWAY"
154 boot_mesg
" DNS Server: $DNS"
157 echo -n `/etc/rc.d/helper/getdnsfromdhcpc.pl 1` > /var
/ipfire
/red
/dns1
158 echo -n `/etc/rc.d/helper/getdnsfromdhcpc.pl 2` > /var
/ipfire
/red
/dns2
160 .
/var
/ipfire
/dhcpc
/dhcpcd-
${DEVICE}.info
161 echo "$IPADDR" > /var
/ipfire
/red
/local-ipaddress
162 grep -v "gateway" /etc
/hosts
> /tmp
/hosts
163 echo "$GATEWAY gateway" >> /tmp
/hosts
164 mv /tmp
/hosts
/etc
/hosts
165 echo "$GATEWAY" > /var
/ipfire
/red
/remote-ipaddress
172 elif [ "$TYPE" == "PPPOE" ]; then
174 if ( ps ax |
grep -q [p
]ppd
); then
175 boot_mesg
"pppd is still running." ${FAILURE}
180 eval $
(/usr
/local
/bin
/readhash
/var
/ipfire
/ppp
/settings
)
182 [ -c "/dev/ppp" ] || mknod
/dev
/ppp c
108 0
186 if [ "$TYPE" == "pppoeatm" ]; then
188 boot_mesg
"Createing ATM-Bridge as $PPP_NIC ..."
189 br2684ctl
-c0 -e${ENCAP} -a0.${VPI}.${VCI} >/dev
/null
2>&1 &
194 if [ "$TYPE" == "pppoe" ]; then
195 if [ "$PPP_NIC" == "" ]; then
196 boot_mesg
"No device for red interface given. Check netsetup or dialprofile!" ${FAILURE}
200 boot_mesg
"Bringing up the PPPoE interface on $PPP_NIC ..."
201 ip addr add
1.1.1.1/24 broadcast
1.1.1.255 dev
$PPP_NIC
203 boot_mesg
"Bringing up the PPP via ${TYPE} on ${COMPORT}..."
207 ### Configuring the pppd ###
212 [ "${METHOD}" == "PPPOE_PLUGIN" ] && \
213 PLUGOPTS
="plugin /usr/lib/pppd/2.4.4/rp-pppoe.so"
215 # PLUGOPTS="plugin /usr/lib/pppd/2.4.4/rp-pppoe.so nic-$PPP_NIC"
222 ### Access Concentrator Name
224 if [ -n "${CONCENTRATORNAME}" ]; then
225 ACNAME
="-C ${CONCENTRATORNAME}"
230 if [ -n "${SERVICENAME}" ]; then
231 if [ "${METHOD}" == "PPPOE_PLUGIN" ]; then
232 PLUGOPTS
+=" rp_pppoe_service ${SERVICENAME}"
234 SERVICENAME
="-S ${SERVICENAME}"
238 ### Authentication Types
240 if [ "${AUTH}" == "pap" ]; then
242 elif [ "${AUTH}" == "chap" ]; then
250 if [ "${DNS}" == "Automatic" ]; then
254 echo nameserver
=$DNS1 > /etc
/ppp
/resolv.conf
255 echo nameserver
=$DNS2 >> /etc
/ppp
/resolv.conf
261 if [ "${RECONNECTION}" != "persistent" ]; then
262 if [ "${TIMEOUT}" != "0" ] && [ "${TIMEOUT}" != "" ]; then
263 SECONDS
=$
[${TIMEOUT} * 60]
267 if [ "${RECONNECTION}" == "dialondemand" ]; then
268 touch /var
/ipfire
/red
/dial-on-demand
269 DEMAND
="demand persist idle ${SECONDS} 10.112.112.112:10.112.112.113"
270 DEMAND
+=" ipcp-accept-remote ipcp-accept-local noipdefault ktune"
274 ### When using pppoe-plugin the device has to be the last option
276 [ "${METHOD}" == "PPPOE_PLUGIN" ] && PLUGOPTS
+=" $PPP_NIC"
278 if [ "$TYPE" == "modem" ]; then
279 PLUGOPTS
=" /dev/${COMPORT} ${DTERATE} connect /etc/ppp/dialer lock modem crtscts"
280 elif [ "$TYPE" == "serial" ]; then
281 PLUGOPTS
=" /dev/${COMPORT} ${DTERATE} connect /bin/true lock modem crtscts"
284 ### Standard PPP options we always use
286 PPP_STD_OPTIONS
="$PLUGOPTS $DNS defaultroute noipdefault noauth"
287 PPP_STD_OPTIONS
+=" default-asyncmap hide-password nodetach mtu ${MTU}"
288 PPP_STD_OPTIONS
+=" mru ${MTU} noaccomp nodeflate nopcomp novj novjccomp"
289 PPP_STD_OPTIONS
+=" nobsdcomp user ${USERNAME} lcp-echo-interval 20"
290 PPP_STD_OPTIONS
+=" lcp-echo-failure 3 ${AUTH}"
294 if [ "${DEBUG}" == "on" ]; then
302 if [ "$TYPE" == "pppoe" ]; then
303 PPPOE_CMD
="/usr/sbin/pppoe -p /var/run/ppp-ipfire.pid.pppoe -I $PPP_NIC"
304 PPPOE_CMD
+=" -T 80 -U $PPPOE_SYNC $ACNAME $SERVICENAMEOPT"
309 if [ "${METHOD}" == "PPPOE_PLUGIN" ]; then
310 /usr
/sbin
/pppd
$PPP_STD_OPTIONS $DEBUG $DEMAND >/dev
/null
2>&1 &
312 # echo PLUGIN: /usr/sbin/pppd $PPP_STD_OPTIONS $DEBUG $DEMAND
314 /usr
/sbin
/pppd pty
"$PPPOE_CMD" $PPP_STD_OPTIONS $DEBUG $DEMAND $PPPD_SYNC >/dev
/null
2>&1 &
316 # echo PPP: /usr/sbin/pppd pty "$PPPOE_CMD" $PPP_STD_OPTIONS $DEBUG $DEMAND $PPPD_SYNC
319 /etc
/rc.d
/init.d
/connectd start
325 if [ "$TYPE" == "STATIC" ]; then
326 boot_mesg
"Stopping default gateway ${GATEWAY}..."
327 ip route del default via
${GATEWAY} >/dev
/null
2>&1
329 if [ "$DEVICE" != "${GREEN_DEV}" ]; then
330 boot_mesg
"Removing IPv4 address ${ADDRESS} from the ${DEVICE} interface..."
331 ip addr del
${args} dev
${DEVICE}
334 run_subdir
${rc_base}/init.d
/networking
/red.down
/
336 elif [ "$TYPE" == "DHCP" ]; then
337 boot_mesg
-n "Stopping dhcpcd on the ${DEVICE} interface..."
338 if [ -e $LEASEINFO ]; then
340 if [ "$LEASETIME" = "4294967295" ]; then
341 # do nothing, just echo ok
345 if [ -n "$DHCP_STOP" ]; then
346 /sbin
/dhcpcd
${DEVICE} $DHCP_STOP &> /dev
/null
348 if [ "$RET" -eq 0 ]; then
351 elif [ "$RET" -eq 1 ]; then
352 boot_mesg
"dhcpcd not running!" ${WARNING}
364 boot_mesg
-n "LEASEINFO Test failed! - " ${WARNING}
365 boot_mesg
"dhcpcd is not running!" ${WARNING}
370 elif [ "$TYPE" == "PPPOE" ]; then
371 boot_mesg
"Bringing down the PPP interface ..."
372 rm -f /var
/ipfire
/red
/keepconnected
373 killall
-w -s TERM
/usr
/sbin
/pppd
2>/dev
/null
375 ip addr del
1.1.1.1/24 broadcast
1.1.1.255 dev
${DEVICE} >/dev
/null
2>&1
378 if [ "$DEVICE" != "${GREEN_DEV}" ] && [ "$DEVICE" != "" ]; then
379 link_status
=`ip link show $DEVICE 2> /dev/null`
380 if [ -n "${link_status}" ]; then
381 if echo "${link_status}" |
grep -q UP
; then
382 boot_mesg
"Bringing down the ${DEVICE} interface..."
383 ip link
set ${DEVICE} down
388 killall
-w -s KILL
/usr
/sbin
/pppd
>/dev
/null
2>&1
389 killall
-w -s KILL br2684ctl
>/dev
/null
2>&1
390 rm -f /var
/ipfire
/red
/{active
,device
,dial-on-demand
,dns1
,dns2
,local-ipaddress
,remote-ipaddress
,resolv.conf
}