src/initscripts/init.d/swconfig

   1 #!/bin/sh
   2 ########################################################################
   3 # Begin $rc_base/init.d/swconfig
   4 #
   5 # Description : Script to setup lan switch.
   6 #               don't edit this script! If you want change the functions
   7 #               create an own script called swconfig.user
   8 ########################################################################
   9
  10 . /etc/sysconfig/rc
  11 . ${rc_functions}
  12
  13 if [ -e /etc/init.d/swconfig.user ]; then
  14         /etc/init.d/swconfig.user $*
  15         exit ${?}
  16 fi
  17
  18 if [ -e /var/ipfire/ethernet/swconfig_mac ]; then
  19 SWMAC=`cat /var/ipfire/ethernet/swconfig_mac`
  20 else
  21 # Generate a random local administrated mac address for vlan swconfig.
  22 SWMAC=`printf "%1x2:%02x:%02x:%02x:%02x" $[RANDOM%16] $[RANDOM%256] $[RANDOM%256] $[RANDOM%256] $[RANDOM%256]`
  23 echo $SWMAC > /var/ipfire/ethernet/swconfig_mac
  24 fi
  25
  26 case "${1}" in
  27         start)
  28                 case `cat /proc/device-tree/model 2>/dev/null` in
  29                         "Lamobo-R1")
  30                                 #
  31                                 # Lamobo R1 aka BPi R1 Routerboard
  32                                 #
  33                                 # Speaker | LAN1 | LAN2 | LAN3 | LAN4 || LAN5 | HDMI
  34                                 # SW-Port |  P2  |  P1  |  P0  |  P4  ||  P3  |
  35                                 # VLAN    |  11  |  12  |  13  |  14  ||ALL(t)|
  36                                 #
  37                                 # Switch-Port P8 - ALL(t) boards internal CPU Port
  38                                 #
  39                                 device=`ls /sys/class/net/*/device/stmmac-0* | head -1 | cut -d/ -f5`
  40                                 ip link set $device up
  41                                 boot_mesg "Configure vlan-switch on $device ..."
  42                                 # Reset switch, counter and enable vlan mode
  43                                 swconfig dev $device set reset 1
  44                                 swconfig dev $device set reset_mib 1
  45                                 swconfig dev $device set enable_vlan 1
  46                                 # configure vlans
  47                                 swconfig dev $device vlan 11 set ports "2 3t 8t"
  48                                 swconfig dev $device vlan 12 set ports "1 3t 8t"
  49                                 swconfig dev $device vlan 13 set ports "0 3t 8t"
  50                                 swconfig dev $device vlan 14 set ports "4 3t 8t"
  51                                 # activate new config
  52                                 swconfig dev $device set apply 1
  53                                 # create interfaces for the vlan's
  54                                 modprobe 8021q
  55                                 vconfig add $device 11
  56                                 vconfig add $device 12
  57                                 vconfig add $device 13
  58                                 vconfig add $device 14
  59                                 # set local mac addresses.
  60                                 ip link set dev $device.11 address $SWMAC:11
  61                                 ip link set dev $device.12 address $SWMAC:12
  62                                 ip link set dev $device.13 address $SWMAC:13
  63                                 ip link set dev $device.14 address $SWMAC:14
  64                                 # need to restart udev...
  65                                 killall udevd
  66                                 /etc/init.d/udev start
  67                         ;;
  68                 esac
  69                 exit 0
  70         ;;
  71
  72         *)
  73                 echo "Usage: ${0} {start}"
  74                 exit 1
  75         ;;
  76 esac
  77
  78 # End $rc_base/init.d/swconfig
  79