pakfire: use correct tree on x86_64.
[ipfire-2.x.git] / src / ppp / ip-up
1 #!/bin/sh
2 ###############################################################################
3 #                                                                             #
4 # IPFire.org - A linux based firewall                                         #
5 # Copyright (C) 2007  Michael Tremer & Christian Schmidt                      #
6 #                                                                             #
7 # This program is free software: you can redistribute it and/or modify        #
8 # it under the terms of the GNU General Public License as published by        #
9 # the Free Software Foundation, either version 3 of the License, or           #
10 # (at your option) any later version.                                         #
11 #                                                                             #
12 # This program is distributed in the hope that it will be useful,             #
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of              #
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
15 # GNU General Public License for more details.                                #
16 #                                                                             #
17 # You should have received a copy of the GNU General Public License           #
18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
19 #                                                                             #
20 ###############################################################################
21
22 . /etc/sysconfig/rc
23 . $rc_functions
24
25 PRIMARY_DNS=$DNS1
26 SECONDARY_DNS=$DNS2
27
28 eval $(/usr/local/bin/readhash /var/ipfire/ppp/settings)
29
30 if [ "$DNS" == "Automatic" ]; then
31         if [ "$TYPE" == "isdn" ]; then
32                 echo -n "$MS_DNS1" > /var/ipfire/red/dns1
33                 echo -n "$MS_DNS2" > /var/ipfire/red/dns2
34         else
35                 if [ "$PRIMARY_DNS" == "10.11.12.13" ]; then
36                         echo -n "$DNS1" > /var/ipfire/red/dns1
37                 else
38                         echo -n "$PRIMARY_DNS" > /var/ipfire/red/dns1
39                 fi
40                 if [ "$SECONDARY_DNS" == "10.11.12.14" ]; then
41                         echo -n "$DNS2" > /var/ipfire/red/dns2
42                 else
43                         echo -n "$SECONDARY_DNS" > /var/ipfire/red/dns2
44                 fi
45         fi
46 else
47         echo -n "$DNS1" > /var/ipfire/red/dns1
48         echo -n "$DNS2" > /var/ipfire/red/dns2
49 fi
50
51 echo -n "$1" > /var/ipfire/red/iface
52 echo -n "$4" > /var/ipfire/red/local-ipaddress
53 echo -n "$5" > /var/ipfire/red/remote-ipaddress
54 touch /var/ipfire/red/active
55
56 /sbin/ip route replace default via ${IPREMOTE} dev ppp0
57 run_subdir ${rc_base}/init.d/networking/red.up/
58
59 #Check if gateway has answerd to ping, if not replace with ping.ipfire.org
60 TEST=`/usr/bin/ping -c 2 $5 2>/dev/null | tail -2 | head -1 | cut -d"," -f2`;
61
62 grep -v -E "\<gateway\>" /etc/hosts > /tmp/hosts
63
64 if [ "$TEST" == " 2 received" ]; then
65         #ping the ppp-gateway
66         echo "$5        gateway" >> /tmp/hosts
67 else
68         #no answer
69         HOST=`host ping.ipfire.org`;
70         FIRE=`echo $HOST | cut -d" " -f4`;
71         CHK=`echo $HOST | cut -d" " -f3`;
72         if [ "$CHK" == "address" ]; then
73             #use ping.ipfire.org
74             echo "$FIRE gateway" >> /tmp/hosts
75         else
76             #DNS lookup failed use direct ip
77             echo "178.63.73.246 gateway" >> /tmp/hosts
78         fi
79 fi
80 mv /tmp/hosts /etc/hosts
81
82 [ -e "/var/ipfire/ppp/nobeeps" ] || /etc/rc.d/init.d/beep up
83