]> git.ipfire.org Git - ipfire-2.x.git/commitdiff
knot: Update to version 3.2.4
authorAdolf Belka <adolf.belka@ipfire.org>
Sun, 1 Jan 2023 14:07:13 +0000 (15:07 +0100)
committerPeter Müller <peter.mueller@ipfire.org>
Mon, 9 Jan 2023 18:35:20 +0000 (18:35 +0000)
- Update from version 3.1.7 to 3.2.4
- Update of rootfile
- find-dependencies run and only thing showing as depending on the libs are knot itself.
- Changelog
    Knot DNS 3.2.4 (2022-12-12)
Improvements:
 - knotd: significant speed-up of catalog zone update processing
 - knotd: new runtime check if RRSIG lifetime is lower than RRSIG refresh
 - knotd: reworked zone re-bootstrap scheduling to be less progressive
 - mod-synthrecord: module can work with CIDR-style reverse zones #826
 - python: new libknot wrappers for some dname transformation functions
 - doc: a few fixes and improvements
Bugfixes:
 - knotd: incomplete zone is received when IXFR falls back to AXFR due to
          connection timeout if primary puts initial SOA only to the first message
 - knotd: first zone re-bootstrap is planned after 24 hours
 - knotd: EDNS EXPIRE option is present in outgoing transfer of a catalog zone
 - knotd: catalog zone can expire upon EDNS EXPIRE processing
 - knotd: DNSSEC signing doesn't fail if no offline KSK records available
    Knot DNS 3.2.3 (2022-11-20)
Improvements:
 - knotd: new per-zone DS push configuration option (see 'zone.ds-push')
 - libs: upgraded embedded libngtcp2 to 0.11.0
Bugfixes:
 - knsupdate: program crashes when sending an update
 - knotd: server drops more responses over UDP under higher load
 - knotd: missing EDNS padding in responses over QUIC
 - knotd: some memory issues when handling unusual QUIC traffic
 - kxdpgun: broken IPv4 source subnet processing
 - kdig: incorrect handling of unsent data over QUIC
    Knot DNS 3.2.2 (2022-11-01)
Features:
 - knotd,kxdpgun: support for VLAN (802.1Q) traffic in the XDP mode
 - knotd: added configurable delay upon D-Bus initialization (see 'server.dbus-init-delay')
 - kdig: support for JSON (RFC 8427) output format (see '+json')
 - kdig: support for PROXYv2 (see '+proxy') (Gift for Peter van Dijk)
Improvements:
 - mod-geoip: module respects the server configuration of answer rotation
 - libs: upgraded embedded libngtcp2 to 0.10.0
 - tests: improved robustness of some unit tests
 - doc: added description of zone bootstrap re-planning
Bugfixes:
 - knotd: catalog confusion when a member is added and immediately deleted #818
 - knotd: defective handling of short messages with PROXYv2 header #816
 - knotd: inconsistent processing of malformed messages with PROXYv2 header #817
 - kxdpgun: incorrect XDP mode is logged
 - packaging: outdated dependency check in RPM packages
    Knot DNS 3.2.1 (2022-09-09)
Improvements:
 - libknot: added compatibility with libbpf 1.0 and libxdp
 - libknot: removed some trailing white space characters from textual RR format
 - libs: upgraded embedded libngtcp2 to 0.8.1
Bugfixes:
 - knotd: some non-DNS packets not passed to OS if XDP mode enabled
 - knotd: inappropriate log about QUIC port change if QUIC not enabled
 - knotd/kxdpgun: various memory leaks related to QUIC and TCP
 - kxdpgun: can crash at high rates in emulated XDP mode
 - tests: broken XDP-TCP test on 32-bit platforms
 - kdig: failed to build with enabled QUIC on OpenBSD
 - systemd: failed to start server due to TemporaryFileSystem setting
 - packaging: missing knot-dnssecutils package on CentOS 7
    Knot DNS 3.2.0 (2022-08-22)
Features:
 - knotd: finalized TCP over XDP implementation
 - knotd: initial implementation of DNS over QUIC in the XDP mode (see 'xdp.quic')
 - knotd: new incremental DNSKEY management for multi-signer deployment (see 'policy.dnskey-management')
 - knotd: support for remote grouping in configuration (see 'groups' section)
 - knotd: implemented EDNS Expire option (RFC 7314)
 - knotd: NSEC3 salt is changed with every ZSK rollover if lifetime is set to -1
 - knotd: support for PROXY v2 protocol over UDP (Thanks to Robert Edmonds) #762
 - knotd: support for key labels with PKCS #11 keystore (see 'keystore.key-label')
 - knotd: SVCB/HTTPS treatment according to draft-ietf-dnsop-svcb-https
 - keymgr: new JSON output format (see '-j' parameter) for listing keys or zones (Thanks to JP Mens)
 - kxdpgun: support for DNS over QUIC with some testing modes (see '-U' parameter)
 - kdig: new DNS over QUIC support (see '+quic')
Improvements:
 - knotd: reduced memory consumption when processing IXFR, DNSSEC, catalog, or DDNS
 - knotd: RRSIG refresh values don't have to match in the mode Offline KSK
 - knotd: better decision whether AXFR fallback is needed upon a refresh error
 - knotd: NSEC3 resalt event was merged with the DNSSEC event
 - knotd: server logs when the connection to remote was taken from the pool
 - knotd: server logs zone expiration time when the zone is loaded
 - knotd: DS check verifies removal of old DS during algorithm rollover
 - knotd: DNSSEC-related records can be updated via DDNS
 - knotd: new 'xdp.udp' configuration option for disabling UDP over XDP
 - knotd: outgoing NOTIFY is replanned if failed
 - knotd: configuration checks if zone MIN interval values are lower or equal to MAX ones
 - knotd: DNSSEC-related zone semantic checks use DNSSEC validation
 - knotd: new configuration value 'query' for setting ACL action
 - knotd: new check on near end of imported Offline KSK records
 - knotd/knotc: implemented zone catalog purge, including orphaned member zones
 - knotc: interactive mode supports catalog zone completion, value completion, and more
 - knotc: new default brief and colorized output from zone status
 - knotc: unified empty values in zone status output
 - keymgr: DNSKEY TTL is taken from KSR in the Offline KSK mode
 - kjournalprint: path to journal DB is automatically taken from the configuration,
                  which can be specified using '-c', '-C' (or '-D')
 - kcatalogprint: path to catalog DB is automatically taken from the configuration,
                  which can be specified using '-c', '-C' (or '-D')
 - kzonesign: added automatic configuration file detection and '-C' parameter
              for configuration DB specificaion
 - kzonesign: all CPU threads are used for DNSSEC validation
 - libknot: dname pointer cannot point to another dname pointer when encoding RRsets #765
 - libknot: QNAME case is preserved in knot_pkt_t 'wire' field (Thanks to Robert Edmonds) #780
 - libknot: reduced memory consumption of the XDP mode
 - libknot: XDP filter supports up to 256 NIC queues
 - kxdpgun: new options for specifying source and remote MAC addresses
 - utils: extended logging of LMDB-related errors
 - utils: improved error outputs
 - kdig: query has AD bit set by default
 - doc: various improvements
Bugfixes:
 - knotd: zone changeset is stored to journal even if disabled
 - knotd: journal not applied to zone file if zone file changed during reload
 - knotd: possible out-of-order processing or postponed zone events to far future
 - knotd: incorrect TTL is used if updated RRSet is empty over control interface
 - knotd/libs: serial arithmetics not used for RRSIG expiration processing
 - knsupdate: incorrect RRTYPE in the question section
Compatibility:
 - knotd: default value for 'zone.journal-max-depth' was lowered to 20
 - knotd: default value for 'policy.nsec3-iterations' was lowered to 0
 - knotd: default value for 'policy.rrsig-refresh' is propagation delay + zone maximum TTL
 - knotd: server fails to load configuration if 'policy.rrsig-refresh' is too low
 - knotd: configuration option 'server.listen-xdp' has no effect
 - knotd: new configuration check on deprecated DNSSEC algorithm
 - knotc: new '-e' parameter for full zone status output
 - keymgr: new '-e' parameter for full key list output
 - keymgr: brief key listing mode is enabled by default
 - keymgr: renamed parameter '-d' to '-D'
 - knsupdate: default TTL is set to 3600
 - knsupdate: default zone is empty
 - kjournalprint: renamed parameter '-c' to '-H'
 - python/libknot: removed compatibility with Python 2
Packaging:
 - systemd: removed knot.tmpfile
 - systemd: added some hardening options
 - distro: Debian 9 and Ubuntu 16.04 no longer supported
 - distro: packages for CentOS 7 are built in a separate COPR repository
 - kzonecheck/kzonesign/knsec3hash: moved to new package knot-dnssecutils
    Knot DNS 3.1.9 (2022-08-10)
Improvements:
 - knotd: new configuration checks on unsupported catalog settings
 - knotd: semantic check issues have notice log level in the soft mode
 - keymgr: command generate-ksr automatically sets 'from' parameter to last
           offline KSK records' timestamp if it's not specified
 - keymgr: command show-offline starts from the first offline KSK record set
           if 'from' parameter isn't specified
 - kcatalogprint: new parameters for filtering catalog or member zone
 - mod-probe: default rate limit was increased to 100000
 - libknot: default control timeout was increased to 30 seconds
 - python/libknot: various exceptions are raised from class KnotCtl
 - doc: some improvements
Bugfixes:
 - knotd: incomplete outgoing IXFR is responded if journal history is inconsistent
 - knotd: manually triggered zone flush is suppressed if disabled zone synchronization
 - knotd: failed to configure XDP listen interface without port specification
 - knotd: de-cataloged member zone's file isn't deleted #805
 - knotd: member zone leaks memory when reloading catalog during dynamic configuration change
 - knotd: server can crash when reloading modules with DNSSEC signing (Thanks to iqinlongfei)
 - knotd: server crashes during shutdown if PKCS #11 keystore is used
 - keymgr: command del-all-old isn't applied to all keys in the removed state
 - kxdpgun: user specified network interface isn't used
 - libs: fixed compilation on illumos derivatives (Thanks to Nick Ewins)
    Knot DNS 3.1.8 (2022-04-28)
Features:
 - knotd: optional automatic ACL for XFR and NOTIFY (see 'remote.automatic-acl')
 - knotd: new soft zone semantic check mode for allowing defective zone loading
 - knotc: added zone transfer freeze state to the zone status output
Improvements:
 - knotd: added configuration check for serial policy of generated catalogs
Bugfixes:
 - knotd/libknot: the server can crash when validating a malformed TSIG record
 - knotd: outgoing zone transfer freeze not preserved during server reload
 - knotd: catalog UPDATE not processed if previous UPDATE processing not finished #790
 - knotd: zone refresh not started if planned during server reload
 - knotd: generated catalogs can be queried over UDP
 - knotd/utils: failed to open LMDB database if too many stale slots occupy the lock table

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
config/rootfiles/common/knot
lfs/knot

index 79e86141d0442b55442609aef073e00a4d08b6dd..6660b27d11cc4e8afb5f6eade806060383f3a03c 100644 (file)
@@ -4,12 +4,12 @@ usr/bin/kdig
 #usr/lib/libdnssec.la
 #usr/lib/libdnssec.lai
 #usr/lib/libdnssec.so
-usr/lib/libdnssec.so.8
-usr/lib/libdnssec.so.8.0.0
+usr/lib/libdnssec.so.9
+usr/lib/libdnssec.so.9.0.0
 #usr/lib/libknot.la
 #usr/lib/libknot.lai
 #usr/lib/libknot.so
-usr/lib/libknot.so.12
-usr/lib/libknot.so.12.0.0
+usr/lib/libknot.so.13
+usr/lib/libknot.so.13.0.0
 #usr/lib/libknotus.a
 #usr/lib/libknotus.la
index 0c0c033c03e4634ce26f83970b2dcd5533d89945..feb3c89311593dde5d6dc59fb4146fca8c338509 100644 (file)
--- a/lfs/knot
+++ b/lfs/knot
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2022  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2023  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 3.1.7
+VER        = 3.2.4
 
 THISAPP    = knot-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = d0e5c999c1b4bca89b86ad956dd91643f795fcba94757e34c44e3e6b925030c332da9cb0bfd72d6ae0f32b3016a8c50d821cfcc513268682dd6b5715714d9047
+$(DL_FILE)_BLAKE2 = 1d5fec057898d8cbe73f37cd85aa9d56c7db0215e0fe8ba697f3ee4c38d7554780804b8859d062a824b18f823d6cff1546bd7ce54438ee54c555d068c5f19da1
 
 install : $(TARGET)