]> git.ipfire.org Git - ipfire-2.x.git/commitdiff
miniupnpd: Delete files that would have become orphaned after deletion of miniupnpd...
authorPeter Müller <peter.mueller@ipfire.org>
Tue, 18 May 2021 19:58:27 +0000 (21:58 +0200)
committerMichael Tremer <michael.tremer@ipfire.org>
Thu, 20 May 2021 09:32:33 +0000 (09:32 +0000)
This patch requires
https://patchwork.ipfire.org/project/ipfire/list/?series=2059 to be
applied in the first place.

Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
config/miniupnpd/miniupnpd.conf [deleted file]
src/initscripts/networking/red.down/10-miniupnpd [deleted file]
src/initscripts/networking/red.up/10-miniupnpd [deleted file]

diff --git a/config/miniupnpd/miniupnpd.conf b/config/miniupnpd/miniupnpd.conf
deleted file mode 100644 (file)
index 5827581..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-
-# LAN network interfaces IPs / networks
-# there can be multiple listening ips for SSDP traffic.
-# should be under the form nnn.nnn.nnn.nnn/nn
-listening_ip=green0
-#listening_ip=green1
-
-# HTTP is available on all interfaces
-# port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
-port=0
-
-# chain names for netfilter (not used for pf or ipf).
-upnp_forward_chain=UPNPFW
-upnp_nat_chain=UPNPFW
-
-# bitrates reported by daemon in bits per second
-bitrate_up=1000000
-bitrate_down=10000000
-
-# "secure" mode : when enabled, UPnP client are allowed to add mappings only
-# to their IP.
-secure_mode=yes
-
-# report system uptime instead of daemon uptime
-system_uptime=yes
-
-# notify interval in seconds. default is 30 seconds.
-notify_interval=60
-
-# unused rules cleaning.
-# never remove any rule before this threshold for the number
-# of redirections is exceeded. default to 20
-#clean_ruleset_threshold=10
-# clean process work interval in seconds. default to 0 (disabled).
-# a 600 seconds (10 minutes) interval makes sense
-clean_ruleset_interval=600
-
-# serial and model number the daemon will report to clients
-# in its XML description
-serial=12345678
-model_number=1
-
-# UPnP permission rules
-# (allow|deny) (external port range) ip/mask (internal port range)
-# A port range is <min port>-<max port> or <port> if there is only
-# one port in the range.
-# ip/mask format must be nn.nn.nn.nn/nn
-# it is advised to only allow redirection of port above 1024
-# and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
-allow 0-65535 0.0.0.0/0 0-65535
diff --git a/src/initscripts/networking/red.down/10-miniupnpd b/src/initscripts/networking/red.down/10-miniupnpd
deleted file mode 100644 (file)
index eaf2239..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-[ -x /etc/init.d/miniupnpd ] && \
-       /etc/init.d/miniupnpd stop &>/dev/null
-
-exit 0
diff --git a/src/initscripts/networking/red.up/10-miniupnpd b/src/initscripts/networking/red.up/10-miniupnpd
deleted file mode 100644 (file)
index 5443133..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-[ -x /etc/init.d/miniupnpd ] && \
-       /etc/init.d/miniupnpd start &>/dev/null
-
-exit 0