+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_ALPHA=y
-# CONFIG_UID16 is not set
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# General setup
-#
-CONFIG_ALPHA_GENERIC=y
-# CONFIG_ALPHA_ALCOR is not set
-# CONFIG_ALPHA_XL is not set
-# CONFIG_ALPHA_BOOK1 is not set
-# CONFIG_ALPHA_AVANTI is not set
-# CONFIG_ALPHA_CABRIOLET is not set
-# CONFIG_ALPHA_DP264 is not set
-# CONFIG_ALPHA_EB164 is not set
-# CONFIG_ALPHA_EB64P is not set
-# CONFIG_ALPHA_EB66 is not set
-# CONFIG_ALPHA_EB66P is not set
-# CONFIG_ALPHA_EIGER is not set
-# CONFIG_ALPHA_JENSEN is not set
-# CONFIG_ALPHA_LX164 is not set
-# CONFIG_ALPHA_LYNX is not set
-# CONFIG_ALPHA_MARVEL is not set
-# CONFIG_ALPHA_MIATA is not set
-# CONFIG_ALPHA_MIKASA is not set
-# CONFIG_ALPHA_NAUTILUS is not set
-# CONFIG_ALPHA_NONAME is not set
-# CONFIG_ALPHA_NORITAKE is not set
-# CONFIG_ALPHA_PC164 is not set
-# CONFIG_ALPHA_P2K is not set
-# CONFIG_ALPHA_RAWHIDE is not set
-# CONFIG_ALPHA_RUFFIAN is not set
-# CONFIG_ALPHA_RX164 is not set
-# CONFIG_ALPHA_SX164 is not set
-# CONFIG_ALPHA_SABLE is not set
-# CONFIG_ALPHA_SHARK is not set
-# CONFIG_ALPHA_TAKARA is not set
-# CONFIG_ALPHA_TITAN is not set
-# CONFIG_ALPHA_WILDFIRE is not set
-CONFIG_ISA=y
-CONFIG_EISA=y
-# CONFIG_SBUS is not set
-# CONFIG_MCA is not set
-CONFIG_PCI=y
-CONFIG_VERBOSE_MCHECK=y
-CONFIG_ALPHA_BROKEN_IRQ_MASK=y
-# CONFIG_SMP is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_DISCONTIGMEM is not set
-# CONFIG_ALPHA_LARGE_VMALLOC is not set
-# CONFIG_PCI_NAMES is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=m
-CONFIG_CARDBUS=y
-CONFIG_TCIC=y
-CONFIG_I82092=y
-CONFIG_I82365=y
-CONFIG_NET=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_SRM_ENV is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_BINFMT_EM86 is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play configuration
-#
-CONFIG_PNP=m
-CONFIG_ISAPNP=m
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-CONFIG_BLK_DEV_DAC960=m
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=14336
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_CT_PROTO_GRE=m
-CONFIG_IP_NF_PPTP=m
-# CONFIG_IP_NF_PPTP_DEBUG is not set
-CONFIG_IP_NF_H323=m
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_QUAKE3=m
-CONFIG_IP_NF_RTSP=m
-CONFIG_IP_NF_MMS=m
-CONFIG_IP_NF_CUSEEME=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPPORTHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_QUOTA=m
-CONFIG_IP_NF_POOL=m
-CONFIG_IP_POOL_STATISTICS=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_DSTLIMIT=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_MPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RANDOM=m
-CONFIG_IP_NF_MATCH_PSD=m
-CONFIG_IP_NF_MATCH_OSF=m
-CONFIG_IP_NF_MATCH_NTH=m
-CONFIG_IP_NF_MATCH_IPV4OPTIONS=m
-CONFIG_IP_NF_MATCH_FUZZY=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_U32=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNLIMIT=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_NETLINK=m
-CONFIG_IP_NF_TARGET_IPV4OPTSSTRIP=m
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_TARGET_TARPIT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_PROTO_GRE=m
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_RTSP=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_QUAKE3=m
-CONFIG_IP_NF_NAT_MMS=m
-CONFIG_IP_NF_NAT_CUSEEME=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_LANE is not set
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_VLAN_8021Q=m
-
-#
-#
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_CSZ=m
-CONFIG_NET_SCH_HFSC=m
-# CONFIG_NET_SCH_ATM is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_IPSEC=m
-
-#
-# IPSec options (FreeS/WAN)
-#
-CONFIG_IPSEC_IPIP=y
-CONFIG_IPSEC_AH=y
-CONFIG_IPSEC_AUTH_HMAC_MD5=y
-CONFIG_IPSEC_AUTH_HMAC_SHA1=y
-CONFIG_IPSEC_ESP=y
-CONFIG_IPSEC_ENC_3DES=y
-CONFIG_IPSEC_ALG=y
-CONFIG_IPSEC_ALG_MD5=m
-CONFIG_IPSEC_ALG_SHA1=m
-CONFIG_IPSEC_ALG_SHA2=m
-CONFIG_IPSEC_ALG_3DES=m
-CONFIG_IPSEC_ALG_AES=m
-CONFIG_IPSEC_ALG_BLOWFISH=m
-CONFIG_IPSEC_ALG_TWOFISH=m
-CONFIG_IPSEC_ALG_SERPENT=m
-CONFIG_IPSEC_ALG_CAST=m
-# CONFIG_IPSEC_ALG_NULL is not set
-# CONFIG_IPSEC_ALG_CRYPTOAPI is not set
-# CONFIG_IPSEC_ALG_1DES is not set
-CONFIG_IPSEC_IPCOMP=y
-CONFIG_IPSEC_DEBUG=y
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-MAX_HWIFS=4
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_CMD640=y
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_PCI_WIP is not set
-CONFIG_BLK_DEV_ADMA100=y
-CONFIG_BLK_DEV_AEC62XX=y
-CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_AMD74XX_OVERRIDE=y
-CONFIG_BLK_DEV_ATIIXP=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_TRIFLEX=y
-CONFIG_BLK_DEV_CY82C693=y
-CONFIG_BLK_DEV_CS5530=y
-CONFIG_BLK_DEV_HPT34X=y
-# CONFIG_HPT34X_AUTODMA is not set
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_NS87415=y
-CONFIG_BLK_DEV_OPTI621=y
-CONFIG_BLK_DEV_PDC202XX_OLD=y
-# CONFIG_PDC202XX_BURST is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
-CONFIG_BLK_DEV_RZ1000=y
-CONFIG_BLK_DEV_SC1200=y
-CONFIG_BLK_DEV_SVWKS=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_BLK_DEV_SIS5513=y
-CONFIG_BLK_DEV_SLC90E66=y
-CONFIG_BLK_DEV_TRM290=y
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_DMA_NONPCI is not set
-CONFIG_BLK_DEV_PDC202XX=y
-CONFIG_BLK_DEV_ATARAID=m
-CONFIG_BLK_DEV_ATARAID_PDC=m
-CONFIG_BLK_DEV_ATARAID_HPT=m
-CONFIG_BLK_DEV_ATARAID_MEDLEY=m
-CONFIG_BLK_DEV_ATARAID_SII=m
-
-#
-# SCSI support
-#
-CONFIG_SCSI=m
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_SD_EXTRA_DEVS=8
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_SR_EXTRA_DEVS=2
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_7000FASST=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AHA152X=m
-CONFIG_SCSI_AHA1542=m
-CONFIG_SCSI_AHA1740=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_PROBE_EISA_VL=y
-# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
-CONFIG_AIC79XX_ENABLE_RD_STRM=y
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
-CONFIG_SCSI_ADVANSYS=m
-CONFIG_SCSI_IN2000=m
-CONFIG_SCSI_AM53C974=m
-CONFIG_SCSI_MEGARAID=m
-CONFIG_SCSI_MEGARAID2=m
-CONFIG_SCSI_SATA=y
-CONFIG_SCSI_SATA_AHCI=m
-CONFIG_SCSI_SATA_SVW=m
-CONFIG_SCSI_ATA_PIIX=m
-CONFIG_SCSI_SATA_NV=m
-CONFIG_SCSI_SATA_QSTOR=m
-CONFIG_SCSI_SATA_PROMISE=m
-CONFIG_SCSI_SATA_SX4=m
-CONFIG_SCSI_SATA_SIL=m
-CONFIG_SCSI_SATA_SIS=m
-CONFIG_SCSI_SATA_ULI=m
-CONFIG_SCSI_SATA_VIA=m
-CONFIG_SCSI_SATA_VITESSE=m
-CONFIG_SCSI_BUSLOGIC=m
-# CONFIG_SCSI_OMIT_FLASHPOINT is not set
-CONFIG_SCSI_CPQFCTS=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_DTC3280=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
-CONFIG_SCSI_EATA_DMA=m
-CONFIG_SCSI_EATA_PIO=m
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_GENERIC_NCR5380=m
-CONFIG_SCSI_GENERIC_NCR53C400=y
-CONFIG_SCSI_G_NCR5380_PORT=y
-# CONFIG_SCSI_G_NCR5380_MEM is not set
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_NCR53C406A=m
-CONFIG_SCSI_NCR53C7xx=m
-CONFIG_SCSI_NCR53C7xx_sync=y
-CONFIG_SCSI_NCR53C7xx_FAST=y
-CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_NCR53C8XX=m
-CONFIG_SCSI_SYM53C8XX=m
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
-CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
-CONFIG_SCSI_NCR53C8XX_PQS_PDS=y
-# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
-CONFIG_SCSI_PAS16=m
-CONFIG_SCSI_PCI2000=m
-CONFIG_SCSI_PCI2220I=m
-CONFIG_SCSI_PSI240I=m
-CONFIG_SCSI_QLOGIC_FAS=m
-CONFIG_SCSI_QLOGIC_ISP=m
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_SIM710=m
-CONFIG_SCSI_SYM53C416=m
-CONFIG_SCSI_DC390T=m
-# CONFIG_SCSI_DC390T_NOGENSUPP is not set
-CONFIG_SCSI_T128=m
-CONFIG_SCSI_U14_34F=m
-CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
-CONFIG_SCSI_U14_34F_MAX_TAGS=8
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-CONFIG_SCSI_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=m
-# CONFIG_FUSION_BOOT is not set
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-CONFIG_FUSION_LAN=m
-CONFIG_NET_FC=y
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_EL1=m
-CONFIG_EL2=m
-CONFIG_ELPLUS=m
-CONFIG_EL16=m
-CONFIG_EL3=m
-CONFIG_3C515=m
-# CONFIG_ELMC is not set
-# CONFIG_ELMC_II is not set
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_LANCE=m
-CONFIG_NET_VENDOR_SMC=y
-CONFIG_WD80x3=m
-# CONFIG_ULTRAMCA is not set
-CONFIG_ULTRA=m
-CONFIG_ULTRA32=m
-CONFIG_SMC9194=m
-CONFIG_NET_VENDOR_RACAL=y
-CONFIG_NI5010=m
-CONFIG_NI52=m
-CONFIG_NI65=m
-CONFIG_AT1700=m
-CONFIG_DEPCA=m
-CONFIG_HP100=m
-CONFIG_NET_ISA=y
-CONFIG_E2100=m
-CONFIG_EWRK3=m
-CONFIG_EEXPRESS=m
-CONFIG_EEXPRESS_PRO=m
-CONFIG_HPLAN_PLUS=m
-CONFIG_HPLAN=m
-CONFIG_LP486E=m
-CONFIG_ETH16I=m
-CONFIG_NE2000=m
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-# CONFIG_AMD8111_ETH is not set
-CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_AC3200=m
-CONFIG_APRICOT=m
-CONFIG_B44=m
-CONFIG_CS89x0=m
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_DE4X5=m
-CONFIG_DGRS=m
-CONFIG_DM9102=m
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-CONFIG_E100=m
-CONFIG_LNE390=m
-CONFIG_FEALNX=m
-CONFIG_NATSEMI=m
-CONFIG_NE2K_PCI=m
-CONFIG_FORCEDETH=m
-CONFIG_NE3210=m
-CONFIG_ES3210=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_SIS900=m
-CONFIG_EPIC100=m
-CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
-CONFIG_TLAN=m
-CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
-CONFIG_WINBOND_840=m
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-CONFIG_DL2K=m
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_MYRI_SBUS is not set
-CONFIG_NS83820=m
-CONFIG_HAMACHI=m
-CONFIG_YELLOWFIN=m
-CONFIG_R8169=m
-CONFIG_SK98LIN=m
-CONFIG_TIGON3=m
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-
-#
-# Wireless Pcmcia cards support
-#
-# CONFIG_PCMCIA_HERMES is not set
-CONFIG_AIRO_CS=m
-# CONFIG_PCMCIA_ATMEL is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
-CONFIG_PRISM54=m
-CONFIG_FW_LOADER=m
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-CONFIG_NET_FC=y
-# CONFIG_IPHASE5526 is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_AXNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-# CONFIG_ARCNET_COM20020_CS is not set
-# CONFIG_PCMCIA_IBMTR is not set
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_PCMCIA_XIRTULIP=m
-CONFIG_NET_PCMCIA_RADIO=y
-CONFIG_PCMCIA_RAYCS=m
-CONFIG_PCMCIA_NETWAVE=m
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_AIRONET4500_CS is not set
-
-#
-# ATM drivers
-#
-CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# ISDN subsystem
-#
-CONFIG_ISDN=m
-CONFIG_ISDN_BOOL=y
-CONFIG_ISDN_PPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-# CONFIG_ISDN_AUDIO is not set
-
-#
-# ISDN feature submodules
-#
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DIVERSION is not set
-
-#
-# low-level hardware drivers
-#
-
-#
-# Passive ISDN cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-CONFIG_ISDN_HISAX=y
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_0=y
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_AVM_A1=y
-CONFIG_HISAX_IX1MICROR2=y
-CONFIG_HISAX_ASUSCOM=y
-CONFIG_HISAX_TELEINT=y
-CONFIG_HISAX_HFCS=y
-CONFIG_HISAX_SPORTSTER=y
-CONFIG_HISAX_MIC=y
-CONFIG_HISAX_ISURF=y
-CONFIG_HISAX_HSTSAPHIR=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-# CONFIG_USB_AUERISDN is not set
-
-#
-# Active ISDN cards
-#
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_EICON is not set
-# CONFIG_ISDN_DRV_TPAM is not set
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
-# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
-# CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set
-# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
-# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
-# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
-# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
-# CONFIG_ISDN_DRV_AVMB1_C4 is not set
-# CONFIG_HYSDN is not set
-# CONFIG_HYSDN_CAPI is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-CONFIG_INPUT=m
-CONFIG_INPUT_KEYBDEV=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_FRANDOM=y
-CONFIG_SERIAL_EXTENDED=y
-CONFIG_SERIAL_MANY_PORTS=y
-CONFIG_SERIAL_SHARE_IRQ=y
-# CONFIG_SERIAL_DETECT_IRQ is not set
-# CONFIG_SERIAL_MULTIPORT is not set
-# CONFIG_HUB6 is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-# CONFIG_INPUT_NS558 is not set
-# CONFIG_INPUT_LIGHTNING is not set
-# CONFIG_INPUT_PCIGAME is not set
-# CONFIG_INPUT_CS461X is not set
-# CONFIG_INPUT_EMU10K1 is not set
-# CONFIG_INPUT_SERIO is not set
-# CONFIG_INPUT_SERPORT is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_ANALOG is not set
-# CONFIG_INPUT_A3D is not set
-# CONFIG_INPUT_ADI is not set
-# CONFIG_INPUT_COBRA is not set
-# CONFIG_INPUT_GF2K is not set
-# CONFIG_INPUT_GRIP is not set
-# CONFIG_INPUT_INTERACT is not set
-# CONFIG_INPUT_TMDC is not set
-# CONFIG_INPUT_SIDEWINDER is not set
-# CONFIG_INPUT_IFORCE_USB is not set
-# CONFIG_INPUT_IFORCE_232 is not set
-# CONFIG_INPUT_WARRIOR is not set
-# CONFIG_INPUT_MAGELLAN is not set
-# CONFIG_INPUT_SPACEORB is not set
-# CONFIG_INPUT_SPACEBALL is not set
-# CONFIG_INPUT_STINGER is not set
-# CONFIG_INPUT_DB9 is not set
-# CONFIG_INPUT_GAMECON is not set
-# CONFIG_INPUT_TURBOGRAFX is not set
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-CONFIG_PCMCIA_SERIAL_CS=m
-CONFIG_SYNCLINK_CS=m
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="cp437"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_UHCI=m
-CONFIG_USB_UHCI_ALT=m
-CONFIG_USB_OHCI=m
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_CATC=m
-CONFIG_USB_CDCETHER=m
-CONFIG_USB_USBNET=m
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_BRLVGER is not set
-# CONFIG_USB_LCD is not set
-CONFIG_USB_SPEEDTOUCH=m
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_ALPHA_LEGACY_START_ADDRESS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_MATHEMU=y
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-CONFIG_CRYPTO_SHA256=y
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_FW_LOADER=m
+------------------------------------------------------------------------
+r310 | ms | 2006-10-09 00:55:09 +0200 (Mon, 09 Oct 2006) | 2 lines
+
+Zwischencommit fuer LFS.
+
+------------------------------------------------------------------------
+r309 | ms | 2006-10-08 21:29:44 +0200 (Sun, 08 Oct 2006) | 2 lines
+
+Zwischencommit fuer LFS. Man, Sysklogd und Shadow.
+
+------------------------------------------------------------------------
+r308 | ms | 2006-10-08 21:16:18 +0200 (Sun, 08 Oct 2006) | 2 lines
+
+Zwischencommit fuer LFS. Groff und IPRoute2.
+
+------------------------------------------------------------------------
+r307 | ms | 2006-10-08 21:01:51 +0200 (Sun, 08 Oct 2006) | 2 lines
+
+Zwischencommit fuer LFS. Grub und Gettext.
+
+------------------------------------------------------------------------
+r306 | ms | 2006-10-08 20:05:04 +0200 (Sun, 08 Oct 2006) | 2 lines
+
+Zwischencommit fuer LFS.
+
+------------------------------------------------------------------------
+r305 | ms | 2006-10-08 16:39:28 +0200 (Sun, 08 Oct 2006) | 2 lines
+
+Zwischencommit fuer LFS.
+
+------------------------------------------------------------------------
+r304 | ms | 2006-10-06 11:08:18 +0200 (Fri, 06 Oct 2006) | 2 lines
+
+Zwischencommit fuer LFS. GCC und Binutils fixed.
+
+------------------------------------------------------------------------
+r303 | ms | 2006-10-04 16:35:14 +0200 (Wed, 04 Oct 2006) | 2 lines
+
+Binutilserror behoben.
+
+------------------------------------------------------------------------
+r302 | ms | 2006-10-02 22:48:09 +0200 (Mon, 02 Oct 2006) | 2 lines
+
+Zwischencommit LFS - Stoppt bei Stage2 - Binutils.
+
+------------------------------------------------------------------------
+r301 | ms | 2006-10-01 21:57:04 +0200 (Sun, 01 Oct 2006) | 2 lines
+
+Zwischencommit für LFS.
+
------------------------------------------------------------------------
r300 | ms | 2006-10-01 17:04:23 +0200 (Sun, 01 Oct 2006) | 2 lines
include Config
-VER = 2.4.33
-PATCHLEVEL = 2.4.33.3
+VER = 2.6.16
+PATCHLEVEL = 2.6.16.27
THISAPP = linux-$(VER)
DL_FILE = $(THISAPP).tar.gz
# Normal build or /tools build.
#
-ifeq "$(ROOT)" ""
-ifeq "$(LFS_PASS)" "ipfire"
ifeq "$(SMP)" ""
TARGET = $(DIR_INFO)/linux-$(PATCHLEVEL)-ipfire
endif
ifeq "$(SMP)" "installer"
TARGET = $(DIR_INFO)/linux-$(PATCHLEVEL)-ipfire-installer
endif
-else
- TARGET = $(DIR_INFO)/linux-$(PATCHLEVEL)
-endif
-else
- TARGET = $(DIR_INFO)/linux-$(PATCHLEVEL)-tools
-endif
###############################################################################
# Top-level Rules
###############################################################################
objects =$(DL_FILE) \
- openswan-1.0.10rc2.tar.gz \
+ openswan-2.4.6.kernel-2.6-natt.patch.gz \
iptables-1.3.5.tar.bz2 \
patch-o-matic-ng-20060206.tar.bz2 \
kbc_option_2420.patch \
net4801.kernel.patch_2.4.31 \
netfilter-layer7-v2.1.tar.gz \
- patch-$(PATCHLEVEL).bz2
+ patch-$(PATCHLEVEL).gz
-$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-patch-$(PATCHLEVEL).bz2 = $(DL_FROM)/patch-$(PATCHLEVEL).bz2
-openswan-1.0.10rc2.tar.gz = $(URL_IPFIRE)/openswan-1.0.10rc2.tar.gz
+$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
+patch-$(PATCHLEVEL)gz = $(DL_FROM)/patch-$(PATCHLEVEL).bz2
+openswan-2.4.6.kernel-2.6-natt.patch.gz = $(URL_IPFIRE)/openswan-2.4.6.kernel-2.6-natt.patch.gz
patch-o-matic-ng-20060206.tar.bz2 = $(URL_IPFIRE)/patch-o-matic-ng-20060206.tar.bz2
-iptables-1.3.5.tar.bz2 = $(URL_IPFIRE)/iptables-1.3.5.tar.bz2
-kbc_option_2420.patch = $(URL_IPFIRE)/kbc_option_2420.patch
-net4801.kernel.patch_2.4.31 = $(URL_IPFIRE)/net4801.kernel.patch_2.4.31
+iptables-1.3.5.tar.bz2 = $(URL_IPFIRE)/iptables-1.3.5.tar.bz2
+kbc_option_2420.patch = $(URL_IPFIRE)/kbc_option_2420.patch
+net4801.kernel.patch_2.4.31 = $(URL_IPFIRE)/net4801.kernel.patch_2.4.31
netfilter-layer7-v2.1.tar.gz = $(URL_IPFIRE)/netfilter-layer7-v2.1.tar.gz
-$(DL_FILE)_MD5 = 4d258d4267de64f0a22e23f6ab026990
-patch-$(PATCHLEVEL).bz2_MD5 = 3597da59e82a495d97e1f0ecd8fc5d4d
-openswan-1.0.10rc2.tar.gz_MD5 = 20d51ff963da78f826f4e0f0ebc4bcef
-patch-o-matic-ng-20060206.tar.bz2_MD5 = eca9893afb753e331caddfe63142b566
-iptables-1.3.5.tar.bz2_MD5 = 00fb916fa8040ca992a5ace56d905ea5
-kbc_option_2420.patch_MD5 = 6d37870344f7fcf97ace1fbf43323c60
-net4801.kernel.patch_2.4.31_MD5 = c7d64e3caedb2f2b10e1c11db7f73a04
-netfilter-layer7-v2.1.tar.gz_MD5 = 551626a158c2a2cbfd937d27ecc7fac1
+$(DL_FILE)_MD5 = 50695965725367f39007023feac5e256
+patch-$(PATCHLEVEL).gz_MD5 = 4b09dd018286850c20c0f051ced7b583
+openswan-2.4.6.kernel-2.6-natt.patch.gz_MD5 = 398110db4372ea3acc45bd66d6d86eac
+patch-o-matic-ng-20060206.tar.bz2_MD5 = eca9893afb753e331caddfe63142b566
+iptables-1.3.5.tar.bz2_MD5 = 00fb916fa8040ca992a5ace56d905ea5
+kbc_option_2420.patch_MD5 = 6d37870344f7fcf97ace1fbf43323c60
+net4801.kernel.patch_2.4.31_MD5 = c7d64e3caedb2f2b10e1c11db7f73a04
+netfilter-layer7-v2.1.tar.gz_MD5 = 551626a158c2a2cbfd937d27ecc7fac1
install : $(TARGET)
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
@rm -rf $(DIR_APP) $(DIR_SRC)/linux && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
- cd $(DIR_APP) && bzcat $(DIR_DL)/patch-$(PATCHLEVEL).bz2 | patch -p1
+ cd $(DIR_APP) && zcat $(DIR_DL)/patch-$(PATCHLEVEL).gz | patch -p1
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.16.27-utf8_input-1.patch
# Remove patch level in EXTRAVERSION.
# We want to avoid the need to supply a full kernel
# (installed in a different place) if only one part could be updated
cd $(DIR_APP) && sed -i -e 's/EXTRAVERSION\ =.*/EXTRAVERSION\ =/' Makefile
- cd $(DIR_SRC) && ln -sf linux-$(VER) linux
cd $(DIR_APP) && sed -i -e 's/-Werror//' drivers/scsi/aic7xxx/Makefile
- # add IDE SiS 965L support to SiS driver. Request sf#1517522
- cd $(DIR_SRC) && patch -p0 < $(DIR_SRC)/src/patches/linux-sis-965l.patch
-
- # Openswan
- cd $(DIR_SRC) && rm -rf openswan-*
- cd $(DIR_SRC) && tar xfz $(DIR_DL)/openswan-1.0.10.tar.gz
- cd $(DIR_SRC)/openswan-1.0.10 && patch -Np1 < $(DIR_SRC)/src/patches/openswan-1.0.1-plutoctl.patch
- cd $(DIR_SRC)/openswan-1.0.10 && patch -Np1 < $(DIR_SRC)/src/patches/openswan-1.0.6-numif.patch
- cd $(DIR_SRC)/openswan-1.0.10 && sed -i 's+^KERNELSRC.*$$+KERNELSRC=$(ROOT)/usr/src/linux-$(VER)+' Makefile.inc
- cd $(DIR_SRC)/openswan-1.0.10 && sed -i -e 's/local\/sbin/local\/sbin:\/tools\/bin/' utils/patcher
- cd $(DIR_SRC)/openswan-1.0.10 && make insert
+ # Openswan-2
+ # cd $(DIR_SRC) && zcat $(DIR_DL)/openswan-2.4.6.kernel-2.6-natt.patch.gz | patch -Np0
# Patch-o-matic
cd $(DIR_SRC) && rm -rf iptables-*
- cd $(DIR_SRC) && tar xfj $(DIR_DL)/iptables-1.3.5.tar.bz2
+ cd $(DIR_SRC) && tar xfj $(DIR_DL)/iptables-1.3.5.tar.bz2
cd $(DIR_SRC) && ln -sf iptables-1.3.5 iptables
cd $(DIR_SRC) && rm -rf patch-o-matic*
cd $(DIR_SRC) && tar xfj $(DIR_DL)/patch-o-matic-ng-20060206.tar.bz2
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ pending
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ base
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ h323-conntrack-nat
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ cuseeme-nat
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ mms-conntrack-nat
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ pptp-conntrack-nat
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ rtsp-conntrack
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ quake3-conntrack-nat
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ sip-conntrack-nat
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ ip_queue_vwmark
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ ipp2p
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-01-output-hooks
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-02-input-hooks
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-03-policy-lookup
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-04-policy-checks
- cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(ROOT)/usr/src/linux/ --iptables-path=$(ROOT)/usr/src/iptables/ TARPIT
-
- #imq-patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.4.28-imq2.diff
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ pending
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ base
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ h323-conntrack-nat
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ cuseeme-nat
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ mms-conntrack-nat
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ pptp-conntrack-nat
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ rtsp-conntrack
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ quake3-conntrack-nat
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ sip-conntrack-nat
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ ip_queue_vwmark
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ ipp2p
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-01-output-hooks
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-02-input-hooks
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-03-policy-lookup
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ ipsec-04-policy-checks
+# cd $(DIR_SRC)/patch-o-matic* && yes 'y' | ./runme --kernel-path=$(DIR_APP) --iptables-path=$(ROOT)/usr/src/iptables/ TARPIT
+
+ # imq-patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.16-imq2.diff
#layer7-patch
- cd $(DIR_SRC) && tar xzf $(DIR_DL)/netfilter-layer7-v2.1.tar.gz
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/netfilter-layer7-v2.1/kernel-2.4-layer7-2.1.patch
+ cd $(DIR_SRC) && tar xzf $(DIR_DL)/netfilter-layer7-v2.6.tar.gz
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/netfilter-layer7-v2.6/for_older_kernels/kernel-2.6.13-2.6.16-layer7-2.2.patch
# ip_conntrack permissions from 440 to 444
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/ip_conntrack_standalone-patch-for-ipfire.patch
+ # cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/ip_conntrack_standalone-patch-for-ipfire.patch
ifeq "$(SMP)" ""
# Only do this once on the non-SMP pass
endif
# Olitec isdn gazel patch
- cd $(DIR_APP) && patch -Np0 < $(DIR_SRC)/src/patches/linux-2.4.23-olitec-isdn.patch
+# cd $(DIR_APP) && patch -Np0 < $(DIR_SRC)/src/patches/linux-2.4.23-olitec-isdn.patch
# Fix /proc/stat output
- cd $(DIR_APP) && patch -Np2 < $(DIR_SRC)/src/patches/linux-2.4.26-proc-stat.patch
+# cd $(DIR_APP) && patch -Np2 < $(DIR_SRC)/src/patches/linux-2.4.26-proc-stat.patch
# Fix libata-core.c
# cd $(DIR_APP) && patch -Np0 < $(DIR_SRC)/src/patches/linux-2.4.26-scsi.patch
# frandom patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.4.27-frandom-2.patch
+# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.4.27-frandom-2.patch
# Propolice
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.4.27-ssp-1.patch
+# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.4.27-ssp-1.patch
# Support ppp-2.4.3 multilink behavior (terminate when no channel is connected)
# need updated libpcap older than 0.8.3
# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/ppp_generic-ppp-2.4.3_multilink.patch
# R8169 clone D-link GSE-528T
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.4.29_r8169clone.patch
+# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.4.29_r8169clone.patch
# bootsplash
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/bootsplash-3.0.7-2.4.31-vanilla.diff
+# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/bootsplash-3.0.7-2.4.31-vanilla.diff
# Cleanup kernel source
cd $(DIR_APP) && make mrproper
-ifeq "$(ROOT)" ""
-ifeq "$(LFS_PASS)" "ipfire"
ifeq "$(SMP)" ""
cp $(DIR_SRC)/config/kernel/kernel.config.$(MACHINE) $(DIR_APP)/.config
endif
cd $(DIR_APP) && make CC="$(KGCC)" oldconfig
cd $(DIR_APP) && make CC="$(KGCC)" dep
cd $(DIR_APP) && make CC="$(KGCC)" clean
- if [ "$(MACHINE)" = "i386" -a "$(SMP)" = "" ]; then \
- cd $(DIR_APP) && make -j 3 CC="$(KGCC)" bzImage; \
+ if [ "$(SMP)" = "" ]; then \
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" bzImage; \
cd $(DIR_APP) && cp arch/$(MACHINE)/boot/bzImage /boot/vmlinuz-$(VER); \
cd $(DIR_APP) && cp System.map /boot/System.map-$(VER); \
ln -sf vmlinuz-$(VER) /boot/vmlinuz; \
ln -sf System.map-$(VER) /boot/System.map; \
cd $(DIR_APP) && make CC="$(KGCC)" modules; \
cd $(DIR_APP) && make CC="$(KGCC)" modules_install; \
- elif [ "$(MACHINE)" = "i386" -a "$(SMP)" = "1" ]; then \
+ elif [ "$(SMP)" = "1" ]; then \
cd $(DIR_APP) && sed -i -e 's/EXTRAVERSION\ =/EXTRAVERSION\ =\ -smp/' Makefile; \
- cd $(DIR_APP) && make -j 3 CC="$(KGCC)" bzImage; \
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" bzImage; \
cd $(DIR_APP) && cp arch/$(MACHINE)/boot/bzImage /boot/vmlinuz-$(VER)-smp; \
cd $(DIR_APP) && cp System.map /boot/System.map-$(VER)-smp; \
ln -sf vmlinuz-$(VER)-smp /boot/vmlinuz-smp; \
cd $(DIR_APP) && make CC="$(KGCC)" modules; \
cd $(DIR_APP) && make CC="$(KGCC)" modules_install; \
- elif [ "$(MACHINE)" = "i386" -a "$(SMP)" = "installer" ]; then \
- cd $(DIR_APP) && make -j 3 CC="$(KGCC)" bzImage; \
+ elif [ "$(SMP)" = "installer" ]; then \
+ cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" bzImage; \
cd $(DIR_APP) && cp arch/$(MACHINE)/boot/bzImage /boot/vmlinuz-installer; \
- elif [ "$(MACHINE)" = "alpha" ]; then \
- cd $(DIR_APP) && make -j 3 CC="$(KGCC)" vmlinux; \
- cd $(DIR_APP) && gzip -9c vmlinux > /boot/vmlinuz-$(VER); \
- cd $(DIR_APP) && cp System.map /boot/System.map-$(VER); \
- ln -sf vmlinuz-$(VER) /boot/vmlinuz; \
- ln -sf System.map-$(VER) /boot/System.map; \
- cd $(DIR_APP) && make CC="$(KGCC)" modules; \
- cd $(DIR_APP) && make CC="$(KGCC)" modules_install; \
fi
# remove symlinked pcmcia directory
ifeq "$(SMP)" ""
cd $(DIR_APP) && make mandocs
-mkdir -p /usr/share/man/man9/
cd $(DIR_APP) && cp -af Documentation/man/* /usr/share/man/man9/
-endif
-else
- cd $(DIR_APP) && make include/linux/version.h
- cd $(DIR_APP) && make symlinks
- cd $(DIR_APP) && cp -HRf include/asm /usr/include
- cd $(DIR_APP) && cp -Rf include/asm-generic /usr/include
- cd $(DIR_APP) && cp -Rf include/linux /usr/include
- touch /usr/include/linux/autoconf.h
-endif
-else
- cd $(DIR_APP) && make include/linux/version.h
- cd $(DIR_APP) && make symlinks
- -mkdir -p /tools/include/asm
- cd $(DIR_APP) && cp -f include/asm/* /tools/include/asm
- cd $(DIR_APP) && cp -Rf include/asm-generic /tools/include
- cd $(DIR_APP) && cp -Rf include/linux /tools/include
- cd $(DIR_APP) && touch /tools/include/linux/autoconf.h
endif
@rm -rf $(DIR_SRC)/patch-o-matic* $(DIR_SRC)/iptables*
@$(POSTBUILD)
ipfiremake unzip
ipfiremake linux PASS=ipfire SMP=installer
ipfiremake linux PASS=ipfire SMP=1
- ipfiremake 3cp4218 SMP=1
- ipfiremake amedyn SMP=1
- ipfiremake cxacru SMP=1
- ipfiremake eagle SMP=1
- ipfiremake cnx_pci SMP=1
- ipfiremake fcdsl SMP=1
- ipfiremake fcdsl2 SMP=1
- ipfiremake fcdslsl SMP=1
- ipfiremake fcdslusb SMP=1
- ipfiremake fcdslslusb SMP=1
- ipfiremake fcpci SMP=1
- ipfiremake fcclassic SMP=1
- ipfiremake pulsar SMP=1
- ipfiremake unicorn SMP=1
- ipfiremake promise-sata-300-tx SMP=1
+# ipfiremake 3cp4218 SMP=1
+# ipfiremake amedyn SMP=1
+# ipfiremake cxacru SMP=1
+# ipfiremake eagle SMP=1
+# ipfiremake cnx_pci SMP=1
+# ipfiremake fcdsl SMP=1
+# ipfiremake fcdsl2 SMP=1
+# ipfiremake fcdslsl SMP=1
+# ipfiremake fcdslusb SMP=1
+# ipfiremake fcdslslusb SMP=1
+# ipfiremake fcpci SMP=1
+# ipfiremake fcclassic SMP=1
+# ipfiremake pulsar SMP=1
+# ipfiremake unicorn SMP=1
+# ipfiremake promise-sata-300-tx SMP=1
ipfiremake linux PASS=ipfire
- ipfiremake 3cp4218
- ipfiremake amedyn
- ipfiremake cxacru
- ipfiremake eciadsl
- ipfiremake eagle
- ipfiremake speedtouch
- ipfiremake cnx_pci
- ipfiremake fcdsl
- ipfiremake fcdsl2
- ipfiremake fcdslsl
- ipfiremake fcdslusb
- ipfiremake fcdslslusb
- ipfiremake fcpci
- ipfiremake fcclassic
- ipfiremake pulsar
- ipfiremake unicorn
- ipfiremake promise-sata-300-tx
+# ipfiremake 3cp4218
+# ipfiremake amedyn
+# ipfiremake cxacru
+# ipfiremake eciadsl
+# ipfiremake eagle
+# ipfiremake speedtouch
+# ipfiremake cnx_pci
+# ipfiremake fcdsl
+# ipfiremake fcdsl2
+# ipfiremake fcdslsl
+# ipfiremake fcdslusb
+# ipfiremake fcdslslusb
+# ipfiremake fcpci
+# ipfiremake fcclassic
+# ipfiremake pulsar
+# ipfiremake unicorn
+# ipfiremake promise-sata-300-tx
ipfiremake pcmcia-cs
ipfiremake expat
ipfiremake gdbm
echo -e "Uploading cache to ftp server:"
ncftpls -u $IPFIRE_FTP_USER_INT -p $IPFIRE_FTP_PASS_INT ftp://$IPFIRE_FTP_URL_INT$IPFIRE_FTP_PATH_INT/ > /var/tmp/ftplist
for i in *; do
+ if [ "$i" == "toolchains" ]; then continue; fi
grep -q $i /var/tmp/ftplist
if [ "$?" -ne "0" ]; then
echo -ne "$i"
--- /dev/null
+Submitted By: DJ Lucas (dj at linuxfromscratch dot org)
+Date: 2005-06-18
+Initial Package Version: 3.0.2
+Origin: Jim Gifford, Bruce Dubbs, DJ Lucas
+Description: Fixes client script to use iproute2 (added flush to previous
+ unversioned patches)
+Upstream Status: Not submitted
+
+--- dhcp-3.0.2-orig/client/scripts/linux 2002-11-14 19:09:09.000000000 -0600
++++ dhcp-3.0.2/client/scripts/linux 2005-06-18 22:54:59.000000000 -0500
+@@ -1,26 +1,15 @@
+ #!/bin/bash
+ # dhclient-script for Linux. Dan Halbert, March, 1997.
+ # Updated for Linux 2.[12] by Brian J. Murrell, January 1999.
+-# No guarantees about this. I'm a novice at the details of Linux
+-# networking.
++
++# Updated to iproute2 by Jim Gifford (scripts@jg555.com)
+
+ # Notes:
+
+ # 0. This script is based on the netbsd script supplied with dhcp-970306.
+-
+-# 1. ifconfig down apparently deletes all relevant routes and flushes
+-# the arp cache, so this doesn't need to be done explicitly.
+-
+-# 2. The alias address handling here has not been tested AT ALL.
+-# I'm just going by the doc of modern Linux ip aliasing, which uses
+-# notations like eth0:0, eth0:1, for each alias.
+-
+-# 3. I have to calculate the network address, and calculate the broadcast
+-# address if it is not supplied. This might be much more easily done
+-# by the dhclient C code, and passed on.
+-
+-# 4. TIMEOUT not tested. ping has a flag I don't know, and I'm suspicious
+-# of the $1 in its args.
++# 1. This script was modified to work with iproute2
++# 2. cidr_convert based on a script by Kevin Fleming (kpfleming@linuxfromscratch.org)
++# 3. Updated to delete addresses when taking an interface down (bdubbs@linuxfromscratch.org)
+
+ make_resolv_conf() {
+ if [ "x$new_domain_name" != x ] && [ x"$new_domain_name_servers" != x ]; then
+@@ -32,6 +21,30 @@
+ fi
+ }
+
++dec2binary()
++{
++ local n=$1
++ local ret=""
++ while [ $n != 0 ]; do
++ ret=$[$n%2]$ret
++ n=$[$n>>1]
++ done
++ echo $ret
++}
++
++mask_to_binary()
++{
++ echo `dec2binary $1``dec2binary $2``dec2binary $3``dec2binary $4`
++}
++
++cidr_convert()
++{
++ netmask=$1
++ local mask=`mask_to_binary ${netmask//./ }`
++ mask=${mask%%0*}
++ cidr=${#mask}
++}
++
+ # Must be used on exit. Invokes the local dhcp client exit hooks, if any.
+ exit_with_hooks() {
+ exit_status=$1
+@@ -53,11 +66,6 @@
+ fi
+ fi
+
+-release=`uname -r`
+-release=`expr $release : '\(.*\)\..*'`
+-relminor=`echo $release |sed -e 's/[0-9]*\.\([0-9][0-9]*\)\(\..*\)*$/\1/'`
+-relmajor=`echo $release |sed -e 's/\([0-9][0-9]*\)\..*$/\1/'`
+-
+ if [ x$new_broadcast_address != x ]; then
+ new_broadcast_arg="broadcast $new_broadcast_address"
+ fi
+@@ -65,13 +73,12 @@
+ old_broadcast_arg="broadcast $old_broadcast_address"
+ fi
+ if [ x$new_subnet_mask != x ]; then
+- new_subnet_arg="netmask $new_subnet_mask"
++ cidr_convert $new_subnet_mask
++ new_subnet_arg="$cidr"
+ fi
+ if [ x$old_subnet_mask != x ]; then
+- old_subnet_arg="netmask $old_subnet_mask"
+-fi
+-if [ x$alias_subnet_mask != x ]; then
+- alias_subnet_arg="netmask $alias_subnet_mask"
++ cidr_convert $old_subnet_mask
++ old_subnet_arg="$cidr"
+ fi
+
+ if [ x$reason = xMEDIUM ]; then
+@@ -82,17 +89,10 @@
+ if [ x$reason = xPREINIT ]; then
+ if [ x$alias_ip_address != x ]; then
+ # Bring down alias interface. Its routes will disappear too.
+- ifconfig $interface:0- inet 0
+- fi
+- if [ $relmajor -lt 2 ] || ( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] )
+- then
+- ifconfig $interface inet 0.0.0.0 netmask 0.0.0.0 \
+- broadcast 255.255.255.255 up
+- # Add route to make broadcast work. Do not omit netmask.
+- route add default dev $interface netmask 0.0.0.0
+- else
+- ifconfig $interface 0 up
++ ip link set $interface down
++ ip addr del $alias_ip_address dev $interface
+ fi
++ ip link set $interface up
+
+ # We need to give the kernel some time to get the interface up.
+ sleep 1
+@@ -115,83 +115,51 @@
+ fi
+ fi
+
+- if [ x$old_ip_address != x ] && [ x$alias_ip_address != x ] && \
+- [ x$alias_ip_address != x$old_ip_address ]; then
+- # Possible new alias. Remove old alias.
+- ifconfig $interface:0- inet 0
+- fi
+ if [ x$old_ip_address != x ] && [ x$old_ip_address != x$new_ip_address ]; then
+- # IP address changed. Bringing down the interface will delete all routes,
++ # IP address changed. Bring down the interface, delete all routes,
+ # and clear the ARP cache.
+- ifconfig $interface inet 0 down
+-
++ ip link set $interface down
++ ip addr flush dev $interface
+ fi
+ if [ x$old_ip_address = x ] || [ x$old_ip_address != x$new_ip_address ] || \
+ [ x$reason = xBOUND ] || [ x$reason = xREBOOT ]; then
+
+- ifconfig $interface inet $new_ip_address $new_subnet_arg \
+- $new_broadcast_arg
++ ip link set $interface up
++ ip addr add $new_ip_address/$new_subnet_arg $new_broadcast_arg \
++ label $interface dev $interface
+ # Add a network route to the computed network address.
+- if [ $relmajor -lt 2 ] || \
+- ( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] ); then
+- route add -net $new_network_number $new_subnet_arg dev $interface
+- fi
+ for router in $new_routers; do
+- route add default gw $router
++ ip route add default via $router
+ done
+ fi
+- if [ x$new_ip_address != x$alias_ip_address ] && [ x$alias_ip_address != x ];
+- then
+- ifconfig $interface:0- inet 0
+- ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
+- route add -host $alias_ip_address $interface:0
+- fi
+ make_resolv_conf
+ exit_with_hooks 0
+ fi
+
+ if [ x$reason = xEXPIRE ] || [ x$reason = xFAIL ] || [ x$reason = xRELEASE ] \
+ || [ x$reason = xSTOP ]; then
+- if [ x$alias_ip_address != x ]; then
+- # Turn off alias interface.
+- ifconfig $interface:0- inet 0
+- fi
+ if [ x$old_ip_address != x ]; then
+- # Shut down interface, which will delete routes and clear arp cache.
+- ifconfig $interface inet 0 down
+- fi
+- if [ x$alias_ip_address != x ]; then
+- ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
+- route add -host $alias_ip_address $interface:0
++ # Shut down interface, delete routes, and clear arp cache.
++ ip link set $interface down
++ ip addr flush dev $interface
+ fi
+ exit_with_hooks 0
+ fi
+
+ if [ x$reason = xTIMEOUT ]; then
+- if [ x$alias_ip_address != x ]; then
+- ifconfig $interface:0- inet 0
+- fi
+- ifconfig $interface inet $new_ip_address $new_subnet_arg \
+- $new_broadcast_arg
++ ip link set $interface up
++ ip addr set $new_ip_address/$new_subnet_arg $new_broadcast_arg \
++ label $interface dev $interface
+ set $new_routers
+- ############## what is -w in ping?
+- if ping -q -c 1 $1; then
+- if [ x$new_ip_address != x$alias_ip_address ] && \
+- [ x$alias_ip_address != x ]; then
+- ifconfig $interface:0 inet $alias_ip_address $alias_subnet_arg
+- route add -host $alias_ip_address dev $interface:0
+- fi
+- if [ $relmajor -lt 2 ] || \
+- ( [ $relmajor -eq 2 ] && [ $relminor -eq 0 ] ); then
+- route add -net $new_network_number
+- fi
+- for router in $new_routers; do
+- route add default gw $router
+- done
+- make_resolv_conf
+- exit_with_hooks 0
+- fi
+- ifconfig $interface inet 0 down
++
++ for router in $new_routers; do
++ ip route add default via $router
++ done
++
++ make_resolv_conf
++ exit_with_hooks 0
++ ip link set $interface down
++ ip addr flush dev $interface
+ exit_with_hooks 1
+ fi
+
--- /dev/null
+diff -Nru linux-2.6.16/drivers/net/Kconfig linux-2.6.16-imq/drivers/net/Kconfig
+--- linux-2.6.16/drivers/net/Kconfig 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/drivers/net/Kconfig 2006-03-25 20:57:14.000000000 +0000
+@@ -93,6 +93,129 @@
+ To compile this driver as a module, choose M here: the module
+ will be called eql. If unsure, say N.
+
++config IMQ
++ tristate "IMQ (intermediate queueing device) support"
++ depends on NETDEVICES && NETFILTER
++ ---help---
++ The IMQ device(s) is used as placeholder for QoS queueing disciplines.
++ Every packet entering/leaving the IP stack can be directed through
++ the IMQ device where it's enqueued/dequeued to the attached qdisc.
++ This allows you to treat network devices as classes and distribute
++ bandwidth among them. Iptables is used to specify through which IMQ
++ device, if any, packets travel.
++
++ More information at: http://www.linuximq.net/
++
++ To compile this driver as a module, choose M here: the module
++ will be called imq. If unsure, say N.
++
++choice
++ prompt "IMQ behavior (PRE/POSTROUTING)"
++ depends on IMQ
++ default IMQ_BEHAVIOR_BA
++ help
++
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ IMQ can work in any of the following ways:
++
++ PREROUTING | POSTROUTING
++ -----------------|-------------------
++ #1 After NAT | After NAT
++ #2 After NAT | Before NAT
++ #3 Before NAT | After NAT
++ #4 Before NAT | Before NAT
++
++ The default behavior is to hook before NAT on PREROUTING
++ and after NAT on POSTROUTING (#3).
++
++ This settings are specially usefull when trying to use IMQ
++ to shape NATed clients.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++ bool "IMQ AA"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++ bool "IMQ AB"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++ bool "IMQ BA"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++ bool "IMQ BB"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++ int "Number of IMQ devices"
++ range 2 8
++ depends on IMQ
++ default "2"
++ help
++
++ This settings defines how many IMQ devices will be
++ created.
++
++ The default value is 2.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
+ config TUN
+ tristate "Universal TUN/TAP device driver support"
+ select CRC32
+diff -Nru linux-2.6.16/drivers/net/Makefile linux-2.6.16-imq/drivers/net/Makefile
+--- linux-2.6.16/drivers/net/Makefile 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/drivers/net/Makefile 2006-03-25 21:04:53.000000000 +0000
+@@ -125,6 +125,7 @@
+ endif
+
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_DE600) += de600.o
+ obj-$(CONFIG_DE620) += de620.o
+diff -Nru linux-2.6.16/drivers/net/imq.c linux-2.6.16-imq/drivers/net/imq.c
+--- linux-2.6.16/drivers/net/imq.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.16-imq/drivers/net/imq.c 2006-03-25 20:57:14.000000000 +0000
+@@ -0,0 +1,403 @@
++/*
++ * Pseudo-driver for the intermediate queue device.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Authors: Patrick McHardy, <kaber@trash.net>
++ *
++ * The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits: Jan Rafaj <imq2t@cedric.vabo.cz>
++ * - Update patch to 2.4.21
++ * Sebastian Strollo <sstrollo@nortelnetworks.com>
++ * - Fix "Dead-loop on netdevice imq"-issue
++ * Marcel Sebek <sebek64@post.cz>
++ * - Update to 2.6.2-rc1
++ *
++ * After some time of inactivity there is a group taking care
++ * of IMQ again: http://www.linuximq.net
++ *
++ *
++ * 2004/06/30 - New version of IMQ patch to kernels <=2.6.7 including
++ * the following changes:
++ *
++ * - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ * - Correction of imq_init_devs() issue that resulted in
++ * kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ * - Addition of functionality to choose number of IMQ devices
++ * during kernel config (Andre Correa)
++ * - Addition of functionality to choose how IMQ hooks on
++ * PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ * - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ * 2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ * released with almost no problems. 2.6.14-x was released
++ * with some important changes: nfcache was removed; After
++ * some weeks of trouble we figured out that some IMQ fields
++ * in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ * These functions are correctly patched by this new patch version.
++ *
++ * Thanks for all who helped to figure out all the problems with
++ * 2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ * Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ * I didn't forget anybody). I apologize again for my lack of time.
++ *
++ * More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++ #include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_IP_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP_PRI_MANGLE + 1
++#else
++ .priority = NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_IP_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP_PRI_LAST
++#else
++ .priority = NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_IP6_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP6_PRI_MANGLE + 1
++#else
++ .priority = NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_IP6_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP6_PRI_LAST
++#else
++ .priority = NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = 2;
++#endif
++
++static struct net_device *imq_devs;
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++ return (struct net_device_stats *)dev->priv;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++ struct nf_info *info = skb->nf_info;
++
++ if (info) {
++ if (info->indev)
++ dev_put(info->indev);
++ if (info->outdev)
++ dev_put(info->outdev);
++ kfree(info);
++ }
++}
++
++static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct net_device_stats *stats = (struct net_device_stats*) dev->priv;
++
++ stats->tx_bytes += skb->len;
++ stats->tx_packets++;
++
++ skb->imq_flags = 0;
++ skb->destructor = NULL;
++
++ dev->trans_start = jiffies;
++ nf_reinject(skb, skb->nf_info, NF_ACCEPT);
++ return 0;
++}
++
++static int imq_nf_queue(struct sk_buff *skb, struct nf_info *info, unsigned queue_num, void *data)
++{
++ struct net_device *dev;
++ struct net_device_stats *stats;
++ struct sk_buff *skb2 = NULL;
++ struct Qdisc *q;
++ unsigned int index = skb->imq_flags&IMQ_F_IFMASK;
++ int ret = -1;
++
++ if (index > numdevs)
++ return -1;
++
++ dev = imq_devs + index;
++ if (!(dev->flags & IFF_UP)) {
++ skb->imq_flags = 0;
++ nf_reinject(skb, info, NF_ACCEPT);
++ return 0;
++ }
++ dev->last_rx = jiffies;
++
++ if (skb->destructor) {
++ skb2 = skb;
++ skb = skb_clone(skb, GFP_ATOMIC);
++ if (!skb)
++ return -1;
++ }
++ skb->nf_info = info;
++
++ stats = (struct net_device_stats *)dev->priv;
++ stats->rx_bytes+= skb->len;
++ stats->rx_packets++;
++
++ spin_lock_bh(&dev->queue_lock);
++ q = dev->qdisc;
++ if (q->enqueue) {
++ q->enqueue(skb_get(skb), q);
++ if (skb_shared(skb)) {
++ skb->destructor = imq_skb_destructor;
++ kfree_skb(skb);
++ ret = 0;
++ }
++ }
++ if (spin_is_locked(&dev->xmit_lock))
++ netif_schedule(dev);
++ else
++
++ while (!netif_queue_stopped(dev) &&
++ qdisc_restart(dev)<0)
++ /* NOTHING */;
++
++ spin_unlock_bh(&dev->queue_lock);
++
++ if (skb2)
++ kfree_skb(ret ? skb : skb2);
++
++ return ret;
++}
++
++static struct nf_queue_handler nfqh = {
++ .name = "imq",
++ .outfn = imq_nf_queue,
++};
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff **pskb,
++ const struct net_device *indev,
++ const struct net_device *outdev,
++ int (*okfn)(struct sk_buff *))
++{
++ if ((*pskb)->imq_flags & IMQ_F_ENQUEUE)
++ return NF_QUEUE;
++
++ return NF_ACCEPT;
++}
++
++
++static int __init imq_init_hooks(void)
++{
++ int err;
++
++ err = nf_register_queue_handler(PF_INET, &nfqh);
++ if (err > 0)
++ goto err1;
++ if ((err = nf_register_hook(&imq_ingress_ipv4)))
++ goto err2;
++ if ((err = nf_register_hook(&imq_egress_ipv4)))
++ goto err3;
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++ if ((err = nf_register_queue_handler(PF_INET6, &nfqh)))
++ goto err4;
++ if ((err = nf_register_hook(&imq_ingress_ipv6)))
++ goto err5;
++ if ((err = nf_register_hook(&imq_egress_ipv6)))
++ goto err6;
++#endif
++
++ return 0;
++
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++err6:
++ nf_unregister_hook(&imq_ingress_ipv6);
++err5:
++ nf_unregister_queue_handler(PF_INET6);
++err4:
++ nf_unregister_hook(&imq_egress_ipv6);
++#endif
++err3:
++ nf_unregister_hook(&imq_ingress_ipv4);
++err2:
++ nf_unregister_queue_handler(PF_INET);
++err1:
++ return err;
++}
++
++static void __exit imq_unhook(void)
++{
++ nf_unregister_hook(&imq_ingress_ipv4);
++ nf_unregister_hook(&imq_egress_ipv4);
++ nf_unregister_queue_handler(PF_INET);
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++ nf_unregister_hook(&imq_ingress_ipv6);
++ nf_unregister_hook(&imq_egress_ipv6);
++ nf_unregister_queue_handler(PF_INET6);
++#endif
++}
++
++static int __init imq_dev_init(struct net_device *dev)
++{
++ dev->hard_start_xmit = imq_dev_xmit;
++ dev->type = ARPHRD_VOID;
++ dev->mtu = 1500;
++ dev->tx_queue_len = 30;
++ dev->flags = IFF_NOARP;
++ dev->priv = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL);
++ if (dev->priv == NULL)
++ return -ENOMEM;
++ memset(dev->priv, 0, sizeof(struct net_device_stats));
++ dev->get_stats = imq_get_stats;
++
++ return 0;
++}
++
++static void imq_dev_uninit(struct net_device *dev)
++{
++ kfree(dev->priv);
++}
++
++static int __init imq_init_devs(void)
++{
++ struct net_device *dev;
++ int i,j;
++ j = numdevs;
++
++ if (!numdevs || numdevs > IMQ_MAX_DEVS) {
++ printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++ IMQ_MAX_DEVS);
++ return -EINVAL;
++ }
++
++ imq_devs = kmalloc(sizeof(struct net_device) * numdevs, GFP_KERNEL);
++ if (!imq_devs)
++ return -ENOMEM;
++ memset(imq_devs, 0, sizeof(struct net_device) * numdevs);
++
++ /* we start counting at zero */
++ numdevs--;
++
++ for (i = 0, dev = imq_devs; i <= numdevs; i++, dev++) {
++ SET_MODULE_OWNER(dev);
++ strcpy(dev->name, "imq%d");
++ dev->init = imq_dev_init;
++ dev->uninit = imq_dev_uninit;
++
++ if (register_netdev(dev) < 0)
++ goto err_register;
++ }
++ printk(KERN_INFO "IMQ starting with %u devices...\n", j);
++ return 0;
++
++err_register:
++ for (; i; i--)
++ unregister_netdev(--dev);
++ kfree(imq_devs);
++ return -EIO;
++}
++
++static void imq_cleanup_devs(void)
++{
++ int i;
++ struct net_device *dev = imq_devs;
++
++ for (i = 0; i <= numdevs; i++)
++ unregister_netdev(dev++);
++
++ kfree(imq_devs);
++}
++
++static int __init imq_init_module(void)
++{
++ int err;
++
++ if ((err = imq_init_devs())) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_devs()\n");
++ return err;
++ }
++ if ((err = imq_init_hooks())) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++ imq_cleanup_devs();
++ return err;
++ }
++
++ printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++ return 0;
++}
++
++static void __exit imq_cleanup_module(void)
++{
++ imq_unhook();
++ imq_cleanup_devs();
++ printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++
++module_init(imq_init_module);
++module_exit(imq_cleanup_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+diff -Nru linux-2.6.16/include/linux/imq.h linux-2.6.16-imq/include/linux/imq.h
+--- linux-2.6.16/include/linux/imq.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.16-imq/include/linux/imq.h 2006-03-25 20:57:14.000000000 +0000
+@@ -0,0 +1,9 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++#define IMQ_MAX_DEVS 16
++
++#define IMQ_F_IFMASK 0x7f
++#define IMQ_F_ENQUEUE 0x80
++
++#endif /* _IMQ_H */
+diff -Nru linux-2.6.16/include/linux/netfilter_ipv4/ipt_IMQ.h linux-2.6.16-imq/include/linux/netfilter_ipv4/ipt_IMQ.h
+--- linux-2.6.16/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.16-imq/include/linux/netfilter_ipv4/ipt_IMQ.h 2006-03-25 20:57:14.000000000 +0000
+@@ -0,0 +1,8 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++struct ipt_imq_info {
++ unsigned int todev; /* target imq device */
++};
++
++#endif /* _IPT_IMQ_H */
+diff -Nru linux-2.6.16/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-2.6.16-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h
+--- linux-2.6.16/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.16-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h 2006-03-25 20:57:14.000000000 +0000
+@@ -0,0 +1,8 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++struct ip6t_imq_info {
++ unsigned int todev; /* target imq device */
++};
++
++#endif /* _IP6T_IMQ_H */
+diff -Nru linux-2.6.16/include/linux/skbuff.h linux-2.6.16-imq/include/linux/skbuff.h
+--- linux-2.6.16/include/linux/skbuff.h 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/include/linux/skbuff.h 2006-03-25 20:57:14.000000000 +0000
+@@ -275,6 +275,10 @@
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ struct sk_buff *nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ unsigned char imq_flags;
++ struct nf_info *nf_info;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ struct nf_bridge_info *nf_bridge;
+ #endif
+diff -Nru linux-2.6.16/net/core/skbuff.c linux-2.6.16-imq/net/core/skbuff.c
+--- linux-2.6.16/net/core/skbuff.c 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/net/core/skbuff.c 2006-03-25 20:57:14.000000000 +0000
+@@ -425,6 +425,10 @@
+ C(nfct_reasm);
+ nf_conntrack_get_reasm(skb->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ C(imq_flags);
++ C(nf_info);
++#endif /*CONFIG_IMQ*/
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ C(nf_bridge);
+ nf_bridge_get(skb->nf_bridge);
+@@ -489,6 +493,10 @@
+ #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ new->ipvs_property = old->ipvs_property;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ new->imq_flags = old->imq_flags;
++ new->nf_info = old->nf_info;
++#endif /*CONFIG_IMQ*/
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ new->nf_bridge = old->nf_bridge;
+ nf_bridge_get(old->nf_bridge);
+diff -Nru linux-2.6.16/net/ipv4/netfilter/Kconfig linux-2.6.16-imq/net/ipv4/netfilter/Kconfig
+--- linux-2.6.16/net/ipv4/netfilter/Kconfig 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/net/ipv4/netfilter/Kconfig 2006-03-25 21:54:10.000000000 +0000
+@@ -505,6 +505,17 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config IP_NF_TARGET_IMQ
++ tristate "IMQ target support"
++ depends on IP_NF_MANGLE
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which IMQ device packets should get enqueued/dequeued.
++
++ For more information visit: http://www.linuximq.net/
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config IP_NF_TARGET_TOS
+ tristate "TOS target support"
+ depends on IP_NF_MANGLE
+diff -Nru linux-2.6.16/net/ipv4/netfilter/Makefile linux-2.6.16-imq/net/ipv4/netfilter/Makefile
+--- linux-2.6.16/net/ipv4/netfilter/Makefile 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/net/ipv4/netfilter/Makefile 2006-03-25 21:06:00.000000000 +0000
+@@ -64,6 +64,7 @@
+ obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
+ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+ obj-$(CONFIG_IP_NF_TARGET_DSCP) += ipt_DSCP.o
++obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
+ obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+ obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+diff -Nru linux-2.6.16/net/ipv4/netfilter/ipt_IMQ.c linux-2.6.16-imq/net/ipv4/netfilter/ipt_IMQ.c
+--- linux-2.6.16/net/ipv4/netfilter/ipt_IMQ.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.16-imq/net/ipv4/netfilter/ipt_IMQ.c 2006-03-25 20:57:14.000000000 +0000
+@@ -0,0 +1,80 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter_ipv4/ip_tables.h>
++#include <linux/netfilter_ipv4/ipt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff **pskb,
++ const struct net_device *in,
++ const struct net_device *out,
++ unsigned int hooknum,
++ const void *targinfo,
++ void *userdata)
++{
++ struct ipt_imq_info *mr = (struct ipt_imq_info*)targinfo;
++
++ (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
++
++ return IPT_CONTINUE;
++}
++
++static int imq_checkentry(const char *tablename,
++ const struct ipt_entry *e,
++ void *targinfo,
++ unsigned int targinfosize,
++ unsigned int hook_mask)
++{
++ struct ipt_imq_info *mr;
++
++ if (targinfosize != IPT_ALIGN(sizeof(struct ipt_imq_info))) {
++ printk(KERN_WARNING "IMQ: invalid targinfosize\n");
++ return 0;
++ }
++ mr = (struct ipt_imq_info*)targinfo;
++
++ if (strcmp(tablename, "mangle") != 0) {
++ printk(KERN_WARNING
++ "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
++ tablename);
++ return 0;
++ }
++
++ if (mr->todev > IMQ_MAX_DEVS) {
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ IMQ_MAX_DEVS);
++ return 0;
++ }
++
++ return 1;
++}
++
++static struct ipt_target ipt_imq_reg = {
++ .name = "IMQ",
++ .target = imq_target,
++ .checkentry = imq_checkentry,
++ .me = THIS_MODULE
++};
++
++static int __init init(void)
++{
++ if (ipt_register_target(&ipt_imq_reg))
++ return -EINVAL;
++
++ return 0;
++}
++
++static void __exit fini(void)
++{
++ ipt_unregister_target(&ipt_imq_reg);
++}
++
++module_init(init);
++module_exit(fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+diff -Nru linux-2.6.16/net/ipv6/netfilter/Kconfig linux-2.6.16-imq/net/ipv6/netfilter/Kconfig
+--- linux-2.6.16/net/ipv6/netfilter/Kconfig 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/net/ipv6/netfilter/Kconfig 2006-03-25 21:54:48.000000000 +0000
+@@ -183,6 +183,15 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config IP6_NF_TARGET_IMQ
++ tristate "IMQ target support"
++ depends on IP6_NF_MANGLE
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which imq device packets should get enqueued/dequeued.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config IP6_NF_TARGET_HL
+ tristate 'HL (hoplimit) target support'
+ depends on IP6_NF_MANGLE
+diff -Nru linux-2.6.16/net/ipv6/netfilter/Makefile linux-2.6.16-imq/net/ipv6/netfilter/Makefile
+--- linux-2.6.16/net/ipv6/netfilter/Makefile 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/net/ipv6/netfilter/Makefile 2006-03-25 21:07:08.000000000 +0000
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o
+ obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
+ obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
++obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
+ obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o
+ obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
+ obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o
+diff -Nru linux-2.6.16/net/ipv6/netfilter/ip6t_IMQ.c linux-2.6.16-imq/net/ipv6/netfilter/ip6t_IMQ.c
+--- linux-2.6.16/net/ipv6/netfilter/ip6t_IMQ.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.16-imq/net/ipv6/netfilter/ip6t_IMQ.c 2006-03-25 20:57:14.000000000 +0000
+@@ -0,0 +1,80 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter_ipv6/ip6_tables.h>
++#include <linux/netfilter_ipv6/ip6t_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff **pskb,
++ unsigned int hooknum,
++ const struct net_device *in,
++ const struct net_device *out,
++ const void *targinfo,
++ void *userdata)
++{
++ struct ip6t_imq_info *mr = (struct ip6t_imq_info*)targinfo;
++
++ (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
++
++ return IP6T_CONTINUE;
++}
++
++static int imq_checkentry(const char *tablename,
++ const struct ip6t_entry *e,
++ void *targinfo,
++ unsigned int targinfosize,
++ unsigned int hook_mask)
++{
++ struct ip6t_imq_info *mr;
++
++ if (targinfosize != IP6T_ALIGN(sizeof(struct ip6t_imq_info))) {
++ printk(KERN_WARNING "IMQ: invalid targinfosize\n");
++ return 0;
++ }
++ mr = (struct ip6t_imq_info*)targinfo;
++
++ if (strcmp(tablename, "mangle") != 0) {
++ printk(KERN_WARNING
++ "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
++ tablename);
++ return 0;
++ }
++
++ if (mr->todev > IMQ_MAX_DEVS) {
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ IMQ_MAX_DEVS);
++ return 0;
++ }
++
++ return 1;
++}
++
++static struct ip6t_target ip6t_imq_reg = {
++ .name = "IMQ",
++ .target = imq_target,
++ .checkentry = imq_checkentry,
++ .me = THIS_MODULE
++};
++
++static int __init init(void)
++{
++ if (ip6t_register_target(&ip6t_imq_reg))
++ return -EINVAL;
++
++ return 0;
++}
++
++static void __exit fini(void)
++{
++ ip6t_unregister_target(&ip6t_imq_reg);
++}
++
++module_init(init);
++module_exit(fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+diff -Nru linux-2.6.16/net/sched/sch_generic.c linux-2.6.16-imq/net/sched/sch_generic.c
+--- linux-2.6.16/net/sched/sch_generic.c 2006-03-20 05:53:29.000000000 +0000
++++ linux-2.6.16-imq/net/sched/sch_generic.c 2006-03-25 20:57:14.000000000 +0000
+@@ -29,6 +29,9 @@
+ #include <linux/netdevice.h>
+ #include <linux/skbuff.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/init.h>
+ #include <linux/rcupdate.h>
+ #include <linux/list.h>
+@@ -136,7 +139,13 @@
+
+ if (!netif_queue_stopped(dev)) {
+ int ret;
+- if (netdev_nit)
++
++ if (netdev_nit
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++ )
++
+ dev_queue_xmit_nit(skb, dev);
+
+ ret = dev->hard_start_xmit(skb, dev);
--- /dev/null
+Submitted by: Alexander E. Patrakov <patrakov@ums.usu.ru>
+Signed-off-by: Alexander E. Patrakov <patrakov@ums.usu.ru>
+Date: 2005-10-18
+Initial Package Version: 2.6.15
+Upstream Status: Rejected: they say it modifies the meaning of an existing ioctl
+Origin: http://chris.heathens.co.nz/linux/downloads/patches-2.6.4-cdh1.tar.gz
+ Porting to linux-2.6.16 by Alexander E. Patrakov
+Description: This patch fixes dead keys and copy/paste of non-ASCII characters
+ in UTF-8 mode on Linux console.
+ See more details about the original patch at:
+ http://chris.heathens.co.nz/linux/utf8.html
+
+diff -ur linux-2.6.15-rc6.orig/drivers/char/consolemap.c linux-2.6.15-rc6.my/drivers/char/consolemap.c
+--- linux-2.6.15-rc6.orig/drivers/char/consolemap.c 2005-12-25 10:00:12.000000000 +0500
++++ linux-2.6.15-rc6.my/drivers/char/consolemap.c 2005-12-25 10:01:22.000000000 +0500
+@@ -178,6 +178,7 @@
+ unsigned long refcount;
+ unsigned long sum;
+ unsigned char *inverse_translations[4];
++ u16 *inverse_trans_unicode;
+ int readonly;
+ };
+
+@@ -208,6 +209,41 @@
+ }
+ }
+
++static void set_inverse_trans_unicode(struct vc_data *conp,
++ struct uni_pagedir *p)
++{
++ int i, j, k, glyph;
++ u16 **p1, *p2;
++ u16 *q;
++
++ if (!p) return;
++ q = p->inverse_trans_unicode;
++ if (!q) {
++ q = p->inverse_trans_unicode =
++ kmalloc(MAX_GLYPH * sizeof(u16), GFP_KERNEL);
++ if (!q)
++ return;
++ }
++ memset(q, 0, MAX_GLYPH * sizeof(u16));
++
++ for (i = 0; i < 32; i++) {
++ p1 = p->uni_pgdir[i];
++ if (!p1)
++ continue;
++ for (j = 0; j < 32; j++) {
++ p2 = p1[j];
++ if (!p2)
++ continue;
++ for (k = 0; k < 64; k++) {
++ glyph = p2[k];
++ if (glyph >= 0 && glyph < MAX_GLYPH
++ && q[glyph] < 32)
++ q[glyph] = (i << 11) + (j << 6) + k;
++ }
++ }
++ }
++}
++
+ unsigned short *set_translate(int m, struct vc_data *vc)
+ {
+ inv_translate[vc->vc_num] = m;
+@@ -218,19 +254,29 @@
+ * Inverse translation is impossible for several reasons:
+ * 1. The font<->character maps are not 1-1.
+ * 2. The text may have been written while a different translation map
+- * was active, or using Unicode.
++ * was active.
+ * Still, it is now possible to a certain extent to cut and paste non-ASCII.
+ */
+-unsigned char inverse_translate(struct vc_data *conp, int glyph)
++u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode)
+ {
+ struct uni_pagedir *p;
++ int m;
+ if (glyph < 0 || glyph >= MAX_GLYPH)
+ return 0;
+- else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc) ||
+- !p->inverse_translations[inv_translate[conp->vc_num]])
++ else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc))
+ return glyph;
+- else
+- return p->inverse_translations[inv_translate[conp->vc_num]][glyph];
++ else if (use_unicode) {
++ if (!p->inverse_trans_unicode)
++ return glyph;
++ else
++ return p->inverse_trans_unicode[glyph];
++ } else {
++ m = inv_translate[conp->vc_num];
++ if (!p->inverse_translations[m])
++ return glyph;
++ else
++ return p->inverse_translations[m][glyph];
++ }
+ }
+
+ static void update_user_maps(void)
+@@ -244,6 +290,7 @@
+ p = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc;
+ if (p && p != q) {
+ set_inverse_transl(vc_cons[i].d, p, USER_MAP);
++ set_inverse_trans_unicode(vc_cons[i].d, p);
+ q = p;
+ }
+ }
+@@ -354,6 +401,10 @@
+ kfree(p->inverse_translations[i]);
+ p->inverse_translations[i] = NULL;
+ }
++ if (p->inverse_trans_unicode) {
++ kfree(p->inverse_trans_unicode);
++ p->inverse_trans_unicode = NULL;
++ }
+ }
+
+ void con_free_unimap(struct vc_data *vc)
+@@ -512,6 +563,7 @@
+
+ for (i = 0; i <= 3; i++)
+ set_inverse_transl(vc, p, i); /* Update all inverse translations */
++ set_inverse_trans_unicode(vc, p);
+
+ return err;
+ }
+@@ -562,6 +614,7 @@
+
+ for (i = 0; i <= 3; i++)
+ set_inverse_transl(vc, p, i); /* Update all inverse translations */
++ set_inverse_trans_unicode(vc, p);
+ dflt = p;
+ return err;
+ }
+@@ -618,6 +671,19 @@
+ p->readonly = rdonly;
+ }
+
++/* may be called during an interrupt */
++u32 conv_8bit_to_uni(unsigned char c)
++{
++ /*
++ * Always use USER_MAP. This function is used by the keyboard,
++ * which shouldn't be affected by G0/G1 switching, etc.
++ * If the user map still contains default values, i.e. the
++ * direct-to-font mapping, then assume user is using Latin1.
++ */
++ unsigned short uni = translations[USER_MAP][c];
++ return uni == (0xf000 | c) ? c : uni;
++}
++
+ int
+ conv_uni_to_pc(struct vc_data *conp, long ucs)
+ {
+diff -ur linux-2.6.15-rc6.orig/drivers/char/keyboard.c linux-2.6.15-rc6.my/drivers/char/keyboard.c
+--- linux-2.6.15-rc6.orig/drivers/char/keyboard.c 2005-12-25 10:00:12.000000000 +0500
++++ linux-2.6.15-rc6.my/drivers/char/keyboard.c 2005-12-25 10:01:22.000000000 +0500
+@@ -34,6 +34,7 @@
+ #include <linux/init.h>
+ #include <linux/slab.h>
+
++#include <linux/consolemap.h>
+ #include <linux/kbd_kern.h>
+ #include <linux/kbd_diacr.h>
+ #include <linux/vt_kern.h>
+@@ -329,10 +330,9 @@
+ * Many other routines do put_queue, but I think either
+ * they produce ASCII, or they produce some user-assigned
+ * string, and in both cases we might assume that it is
+- * in utf-8 already. UTF-8 is defined for words of up to 31 bits,
+- * but we need only 16 bits here
++ * in utf-8 already.
+ */
+-static void to_utf8(struct vc_data *vc, ushort c)
++static void to_utf8(struct vc_data *vc, uint c)
+ {
+ if (c < 0x80)
+ /* 0******* */
+@@ -341,14 +341,33 @@
+ /* 110***** 10****** */
+ put_queue(vc, 0xc0 | (c >> 6));
+ put_queue(vc, 0x80 | (c & 0x3f));
+- } else {
++ } else if (c < 0x10000) {
++ if (c >= 0xD800 && c < 0xE000)
++ return;
++ if (c == 0xFFFF)
++ return;
+ /* 1110**** 10****** 10****** */
+ put_queue(vc, 0xe0 | (c >> 12));
+ put_queue(vc, 0x80 | ((c >> 6) & 0x3f));
+ put_queue(vc, 0x80 | (c & 0x3f));
++ } else if (c < 0x110000) {
++ /* 11110*** 10****** 10****** 10****** */
++ put_queue(vc, 0xf0 | (c >> 18));
++ put_queue(vc, 0x80 | ((c >> 12) & 0x3f));
++ put_queue(vc, 0x80 | ((c >> 6) & 0x3f));
++ put_queue(vc, 0x80 | (c & 0x3f));
+ }
+ }
+
++static void put_8bit(struct vc_data *vc, u8 c)
++{
++ if (kbd->kbdmode != VC_UNICODE || c < 32 || c == 127)
++ /* Don't translate control chars */
++ put_queue(vc, c);
++ else
++ to_utf8(vc, conv_8bit_to_uni(c));
++}
++
+ /*
+ * Called after returning from RAW mode or when changing consoles - recompute
+ * shift_down[] and shift_state from key_down[] maybe called when keymap is
+@@ -409,7 +428,7 @@
+ if (ch == ' ' || ch == d)
+ return d;
+
+- put_queue(vc, d);
++ put_8bit(vc, d);
+ return ch;
+ }
+
+@@ -419,7 +438,7 @@
+ static void fn_enter(struct vc_data *vc, struct pt_regs *regs)
+ {
+ if (diacr) {
+- put_queue(vc, diacr);
++ put_8bit(vc, diacr);
+ diacr = 0;
+ }
+ put_queue(vc, 13);
+@@ -628,7 +647,7 @@
+ diacr = value;
+ return;
+ }
+- put_queue(vc, value);
++ put_8bit(vc, value);
+ }
+
+ /*
+@@ -774,7 +793,7 @@
+ /* kludge */
+ if (up_flag && shift_state != old_state && npadch != -1) {
+ if (kbd->kbdmode == VC_UNICODE)
+- to_utf8(vc, npadch & 0xffff);
++ to_utf8(vc, npadch);
+ else
+ put_queue(vc, npadch & 0xff);
+ npadch = -1;
+diff -ur linux-2.6.15-rc6.orig/drivers/char/selection.c linux-2.6.15-rc6.my/drivers/char/selection.c
+--- linux-2.6.15-rc6.orig/drivers/char/selection.c 2005-12-25 10:00:12.000000000 +0500
++++ linux-2.6.15-rc6.my/drivers/char/selection.c 2005-12-25 10:01:22.000000000 +0500
+@@ -20,6 +20,7 @@
+
+ #include <asm/uaccess.h>
+
++#include <linux/kbd_kern.h>
+ #include <linux/vt_kern.h>
+ #include <linux/consolemap.h>
+ #include <linux/selection.h>
+@@ -34,6 +35,7 @@
+ /* Variables for selection control. */
+ /* Use a dynamic buffer, instead of static (Dec 1994) */
+ struct vc_data *sel_cons; /* must not be disallocated */
++static int use_unicode;
+ static volatile int sel_start = -1; /* cleared by clear_selection */
+ static int sel_end;
+ static int sel_buffer_lth;
+@@ -54,10 +56,11 @@
+ complement_pos(sel_cons, where);
+ }
+
+-static unsigned char
++static u16
+ sel_pos(int n)
+ {
+- return inverse_translate(sel_cons, screen_glyph(sel_cons, n));
++ return inverse_translate(sel_cons, screen_glyph(sel_cons, n),
++ use_unicode);
+ }
+
+ /* remove the current selection highlight, if any,
+@@ -86,8 +89,8 @@
+ 0xFF7FFFFF /* latin-1 accented letters, not division sign */
+ };
+
+-static inline int inword(const unsigned char c) {
+- return ( inwordLut[c>>5] >> (c & 0x1F) ) & 1;
++static inline int inword(const u16 c) {
++ return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
+ }
+
+ /* set inwordLut contents. Invoked by ioctl(). */
+@@ -108,13 +111,36 @@
+ return (v > u) ? u : v;
+ }
+
++/* stores the char in UTF8 and returns the number of bytes used (1-3) */
++int store_utf8(u16 c, char *p)
++{
++ if (c < 0x80) {
++ /* 0******* */
++ p[0] = c;
++ return 1;
++ } else if (c < 0x800) {
++ /* 110***** 10****** */
++ p[0] = 0xc0 | (c >> 6);
++ p[1] = 0x80 | (c & 0x3f);
++ return 2;
++ } else {
++ /* 1110**** 10****** 10****** */
++ p[0] = 0xe0 | (c >> 12);
++ p[1] = 0x80 | ((c >> 6) & 0x3f);
++ p[2] = 0x80 | (c & 0x3f);
++ return 3;
++ }
++}
++
+ /* set the current selection. Invoked by ioctl() or by kernel code. */
+ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty)
+ {
+ struct vc_data *vc = vc_cons[fg_console].d;
+ int sel_mode, new_sel_start, new_sel_end, spc;
+ char *bp, *obp;
+- int i, ps, pe;
++ int i, ps, pe, multiplier;
++ u16 c;
++ struct kbd_struct *kbd = kbd_table + fg_console;
+
+ poke_blanked_console();
+
+@@ -158,7 +184,8 @@
+ clear_selection();
+ sel_cons = vc_cons[fg_console].d;
+ }
+-
++ use_unicode = kbd && kbd->kbdmode == VC_UNICODE;
++
+ switch (sel_mode)
+ {
+ case TIOCL_SELCHAR: /* character-by-character selection */
+@@ -240,7 +267,8 @@
+ sel_end = new_sel_end;
+
+ /* Allocate a new buffer before freeing the old one ... */
+- bp = kmalloc((sel_end-sel_start)/2+1, GFP_KERNEL);
++ multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */
++ bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL);
+ if (!bp) {
+ printk(KERN_WARNING "selection: kmalloc() failed\n");
+ clear_selection();
+@@ -251,8 +279,12 @@
+
+ obp = bp;
+ for (i = sel_start; i <= sel_end; i += 2) {
+- *bp = sel_pos(i);
+- if (!isspace(*bp++))
++ c = sel_pos(i);
++ if (use_unicode)
++ bp += store_utf8(c, bp);
++ else
++ *bp++ = c;
++ if (!isspace(c))
+ obp = bp;
+ if (! ((i + 2) % vc->vc_size_row)) {
+ /* strip trailing blanks from line and add newline,
+diff -ur linux-2.6.15-rc6.orig/include/linux/consolemap.h linux-2.6.15-rc6.my/include/linux/consolemap.h
+--- linux-2.6.15-rc6.orig/include/linux/consolemap.h 2005-12-25 10:00:13.000000000 +0500
++++ linux-2.6.15-rc6.my/include/linux/consolemap.h 2005-12-25 10:01:22.000000000 +0500
+@@ -10,6 +10,7 @@
+
+ struct vc_data;
+
+-extern unsigned char inverse_translate(struct vc_data *conp, int glyph);
++extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
+ extern unsigned short *set_translate(int m, struct vc_data *vc);
+ extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
++extern u32 conv_8bit_to_uni(unsigned char c);
projects / ipfire-2.x.git / commitdiff
