[people/ms/u-boot.git] / include / configs / at91sam9263ek.h

/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * Configuation settings for the AT91SAM9263EK board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * SoC must be defined first, before hardware.h is included.
 * In this case SoC is defined in boards.cfg.
 */
#include <asm/hardware.h>

#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
#define CONFIG_SYS_TEXT_BASE		0x21F00000
#else
#define CONFIG_SYS_TEXT_BASE		0x0000000
#endif

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK	16367660 /* 16.367 MHz crystal */
#define CONFIG_SYS_AT91_SLOW_CLOCK	32768

#define CONFIG_AT91SAM9263EK	1	/* It's an AT91SAM9263EK Board */

#define CONFIG_ARCH_CPU_INIT

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG	1

#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
#define CONFIG_SKIP_LOWLEVEL_INIT
#else
#define CONFIG_SYS_USE_NORFLASH
#endif

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_DISPLAY_CPUINFO

#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT

#define CONFIG_SYS_GENERIC_BOARD

/*
 * Hardware drivers
 */
#define CONFIG_ATMEL_LEGACY
#define CONFIG_AT91_GPIO		1
#define CONFIG_AT91_GPIO_PULLUP		1

/* serial console */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
#define CONFIG_USART_ID			ATMEL_ID_SYS
#define CONFIG_BAUDRATE			115200

/* LCD */
#define CONFIG_LCD			1
#define LCD_BPP				LCD_COLOR8
#define CONFIG_LCD_LOGO			1
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO			1
#define CONFIG_LCD_INFO_BELOW_LOGO	1
#define CONFIG_SYS_WHITE_ON_BLACK	1
#define CONFIG_ATMEL_LCD		1
#define CONFIG_ATMEL_LCD_BGR555		1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1

/* LED */
#define CONFIG_AT91_LED
#define	CONFIG_RED_LED		AT91_PIN_PB7	/* the power led */
#define	CONFIG_GREEN_LED	AT91_PIN_PB8	/* the user1 led */
#define	CONFIG_YELLOW_LED	AT91_PIN_PC29	/* the user2 led */

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE	1
#define CONFIG_BOOTP_BOOTPATH		1
#define CONFIG_BOOTP_GATEWAY		1
#define CONFIG_BOOTP_HOSTNAME		1

/*
 * Command line configuration.
 */
#define CONFIG_CMD_PING		1
#define CONFIG_CMD_DHCP		1
#define CONFIG_CMD_NAND		1
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB		1

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
#define CONFIG_SYS_SDRAM_SIZE		0x04000000

#define CONFIG_SYS_INIT_SP_ADDR \
	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)

/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH		1
#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
#define AT91_SPI_CLK			15000000
#define DATAFLASH_TCSS			(0x1a << 16)
#define DATAFLASH_TCHS			(0x1 << 24)

/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

/* FAT */
#ifdef CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif

/* NOR flash, if populated */
#ifdef CONFIG_SYS_USE_NORFLASH
#define CONFIG_SYS_FLASH_CFI			1
#define CONFIG_FLASH_CFI_DRIVER			1
#define PHYS_FLASH_1				0x10000000
#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT		256
#define CONFIG_SYS_MAX_FLASH_BANKS		1

#define CONFIG_SYS_MONITOR_SEC	1:0-3
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN	(256 << 10)
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x007E0000)
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)

/* Address and size of Primary Environment Sector */
#define CONFIG_ENV_SIZE		0x10000

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
	"update=" \
		"protect off ${monitor_base} +${filesize};" \
		"erase ${monitor_base} +${filesize};" \
		"cp.b ${fileaddr} ${monitor_base} ${filesize};" \
		"protect on ${monitor_base} +${filesize}\0"

#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define MASTER_PLL_MUL		171
#define MASTER_PLL_DIV		14
#define MASTER_PLL_OUT		3

/* clocks */
#define CONFIG_SYS_MOR_VAL						\
		(AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
#define CONFIG_SYS_PLLAR_VAL					\
	(AT91_PMC_PLLAR_29 |					\
	AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) |			\
	AT91_PMC_PLLXR_PLLCOUNT(63) |				\
	AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | 		\
	AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))

/* PCK/2 = MCK Master Clock from PLLA */
#define	CONFIG_SYS_MCKR1_VAL		\
	(AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 |	\
	 AT91_PMC_MCKR_MDIV_2)

/* PCK/2 = MCK Master Clock from PLLA */
#define	CONFIG_SYS_MCKR2_VAL		\
	(AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | 	\
	AT91_PMC_MCKR_MDIV_2)

/* define PDC[31:16] as DATA[31:16] */
#define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
/* no pull-up for D[31:16] */
#define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
#define CONFIG_SYS_MATRIX_EBICSA_VAL					\
	(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V |	\
	 AT91_MATRIX_CSA_EBI_CS1A)

/* SDRAM */
/* SDRAMC_MR Mode register */
#define CONFIG_SYS_SDRC_MR_VAL1		0
/* SDRAMC_TR - Refresh Timer register */
#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
/* SDRAMC_CR - Configuration register*/
#define CONFIG_SYS_SDRC_CR_VAL							\
		(AT91_SDRAMC_NC_9 |						\
		 AT91_SDRAMC_NR_13 |						\
		 AT91_SDRAMC_NB_4 |						\
		 AT91_SDRAMC_CAS_3 |						\
		 AT91_SDRAMC_DBW_32 |						\
		 (1 <<  8) |		/* Write Recovery Delay */		\
		 (7 << 12) |		/* Row Cycle Delay */			\
		 (2 << 16) |		/* Row Precharge Delay */		\
		 (2 << 20) |		/* Row to Column Delay */		\
		 (5 << 24) |		/* Active to Precharge Delay */		\
		 (1 << 28))		/* Exit Self Refresh to Active Delay */

/* Memory Device Register -> SDRAM */
#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
#define CONFIG_SYS_SDRC_MR_VAL2		AT91_SDRAMC_MODE_PRECHARGE
#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_MR_VAL3		AT91_SDRAMC_MODE_REFRESH
#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_MR_VAL4		AT91_SDRAMC_MODE_LMR
#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_MR_VAL5		AT91_SDRAMC_MODE_NORMAL
#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */

/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
#define CONFIG_SYS_SMC0_SETUP0_VAL				\
	(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |	\
	 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
#define CONFIG_SYS_SMC0_PULSE0_VAL				\
	(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |	\
	 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
#define CONFIG_SYS_SMC0_CYCLE0_VAL	\
	(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
#define CONFIG_SYS_SMC0_MODE0_VAL				\
	(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |		\
	 AT91_SMC_MODE_DBW_16 |					\
	 AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))

/* user reset enable */
#define CONFIG_SYS_RSTC_RMR_VAL			\
		(AT91_RSTC_KEY |		\
		AT91_RSTC_MR_URSTEN |		\
		AT91_RSTC_MR_ERSTL(15))

/* Disable Watchdog */
#define CONFIG_SYS_WDTC_WDMR_VAL				\
		(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT |	\
		 AT91_WDT_MR_WDV(0xfff) |			\
		 AT91_WDT_MR_WDDIS |				\
		 AT91_WDT_MR_WDD(0xfff))

#endif

#else
#define CONFIG_SYS_NO_FLASH			1
#endif

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8			1
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
#endif

/* Ethernet */
#define CONFIG_MACB			1
#define CONFIG_RMII			1
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_RESET_PHY_R		1
#define CONFIG_AT91_WANTS_COMMON_PHY

/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW		1
#define CONFIG_DOS_PARTITION		1
#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
#define CONFIG_USB_STORAGE		1
#define CONFIG_CMD_FAT			1

#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */

#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END			0x23e00000

#ifdef CONFIG_SYS_USE_DATAFLASH

/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_ENV_IS_IN_DATAFLASH	1
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
#define CONFIG_ENV_OFFSET		0x4200
#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x4200
#define CONFIG_BOOTCOMMAND	"cp.b 0xC0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
				"root=/dev/mtdblock0 " \
				"mtdparts=atmel_nand:-(root) "\
				"rw rootfstype=jffs2"

#elif CONFIG_SYS_USE_NANDFLASH

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND		1
#define CONFIG_ENV_OFFSET		0xc0000
#define CONFIG_ENV_OFFSET_REDUND	0x100000
#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
#define CONFIG_BOOTARGS							\
	"console=ttyS0,115200 earlyprintk "				\
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
	"256k(env),256k(env_redundant),256k(spare),"			\
	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
	"root=/dev/mtdblock7 rw rootfstype=jffs2"
#endif

#define CONFIG_SYS_PROMPT		"U-Boot> "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP		1
#define CONFIG_CMDLINE_EDITING		1
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)

#endif
Commit	Line	Data
8e429b3e SP	1	/*
8e429b3e SP	2	* (C) Copyright 2007-2008
c9e798d3	3	* Stelian Pop <stelian@popies.net>
8e429b3e SP	4	* Lead Tech Design <www.leadtechdesign.com>
	5	*
	6	* Configuation settings for the AT91SAM9263EK board.
	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
8e429b3e SP	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
cd46b0f2 XH	14	/*
	15	* SoC must be defined first, before hardware.h is included.
	16	* In this case SoC is defined in boards.cfg.
	17	*/
	18	#include <asm/hardware.h>
	19
5e7d0917	20	#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
cd46b0f2	21	#define CONFIG_SYS_TEXT_BASE 0x21F00000
5e7d0917	22	#else
	23	#define CONFIG_SYS_TEXT_BASE 0x0000000
	24	#endif
cd46b0f2	25
8e429b3e	26	/* ARM asynchronous clock */
cd46b0f2 XH	27	#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
cd46b0f2 XH	28	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
cd46b0f2 XH	29
cd46b0f2 XH	30	#define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */
8e429b3e	31
dc39ae95	32	#define CONFIG_ARCH_CPU_INIT
8e429b3e SP	33
	34	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	35	#define CONFIG_SETUP_MEMORY_TAGS 1
	36	#define CONFIG_INITRD_TAG 1
	37
1b3b7c64	38	#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
8e429b3e	39	#define CONFIG_SKIP_LOWLEVEL_INIT
cd46b0f2 XH	40	#else
cd46b0f2 XH	41	#define CONFIG_SYS_USE_NORFLASH
1b3b7c64	42	#endif
8e429b3e	43
cd46b0f2 XH	44	#define CONFIG_BOARD_EARLY_INIT_F
	45
	46	#define CONFIG_DISPLAY_CPUINFO
	47
f9129fe3	48	#define CONFIG_CMD_BOOTZ
36873e7d NF	49	#define CONFIG_OF_LIBFDT
36873e7d NF	50
b2868187 BS	51	#define CONFIG_SYS_GENERIC_BOARD
b2868187 BS	52
8e429b3e SP	53	/*
	54	* Hardware drivers
	55	*/
cd46b0f2 XH	56	#define CONFIG_ATMEL_LEGACY
	57	#define CONFIG_AT91_GPIO 1
	58	#define CONFIG_AT91_GPIO_PULLUP 1
	59
	60	/* serial console */
	61	#define CONFIG_ATMEL_USART
	62	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	63	#define CONFIG_USART_ID ATMEL_ID_SYS
	64	#define CONFIG_BAUDRATE 115200
8e429b3e	65
56a2479c SP	66	/* LCD */
	67	#define CONFIG_LCD 1
	68	#define LCD_BPP LCD_COLOR8
	69	#define CONFIG_LCD_LOGO 1
	70	#undef LCD_TEST_PATTERN
	71	#define CONFIG_LCD_INFO 1
	72	#define CONFIG_LCD_INFO_BELOW_LOGO 1
cd46b0f2	73	#define CONFIG_SYS_WHITE_ON_BLACK 1
56a2479c SP	74	#define CONFIG_ATMEL_LCD 1
56a2479c SP	75	#define CONFIG_ATMEL_LCD_BGR555 1
cd46b0f2	76	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
56a2479c	77
a484b00b JCPV	78	/* LED */
a484b00b JCPV	79	#define CONFIG_AT91_LED
cd46b0f2 XH	80	#define CONFIG_RED_LED AT91_PIN_PB7 /* the power led */
	81	#define CONFIG_GREEN_LED AT91_PIN_PB8 /* the user1 led */
	82	#define CONFIG_YELLOW_LED AT91_PIN_PC29 /* the user2 led */
a484b00b	83
8e429b3e SP	84	#define CONFIG_BOOTDELAY 3
8e429b3e SP	85
8e429b3e SP	86	/*
	87	* BOOTP options
	88	*/
	89	#define CONFIG_BOOTP_BOOTFILESIZE 1
	90	#define CONFIG_BOOTP_BOOTPATH 1
	91	#define CONFIG_BOOTP_GATEWAY 1
	92	#define CONFIG_BOOTP_HOSTNAME 1
	93
	94	/*
	95	* Command line configuration.
	96	*/
8e429b3e SP	97	#define CONFIG_CMD_PING 1
	98	#define CONFIG_CMD_DHCP 1
	99	#define CONFIG_CMD_NAND 1
81724e09	100	#define CONFIG_CMD_MMC
8e429b3e SP	101	#define CONFIG_CMD_USB 1
	102
	103	/* SDRAM */
	104	#define CONFIG_NR_DRAM_BANKS 1
cd46b0f2 XH	105	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
	106	#define CONFIG_SYS_SDRAM_SIZE 0x04000000
	107
	108	#define CONFIG_SYS_INIT_SP_ADDR \
	109	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
8e429b3e SP	110
8e429b3e SP	111	/* DataFlash */
4758ebdd	112	#define CONFIG_ATMEL_DATAFLASH_SPI
8e429b3e	113	#define CONFIG_HAS_DATAFLASH 1
6d0f6bcf JCPV	114	#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
6d0f6bcf JCPV	115	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
8e429b3e SP	116	#define AT91_SPI_CLK 15000000
	117	#define DATAFLASH_TCSS (0x1a << 16)
	118	#define DATAFLASH_TCHS (0x1 << 24)
	119
81724e09 AH	120	/* MMC */
	121	#ifdef CONFIG_CMD_MMC
	122	#define CONFIG_MMC
	123	#define CONFIG_GENERIC_MMC
	124	#define CONFIG_GENERIC_ATMEL_MCI
	125	#endif
	126
	127	/* FAT */
	128	#ifdef CONFIG_CMD_FAT
	129	#define CONFIG_DOS_PARTITION
	130	#endif
	131
8e429b3e	132	/* NOR flash, if populated */
1b3b7c64	133	#ifdef CONFIG_SYS_USE_NORFLASH
6d0f6bcf	134	#define CONFIG_SYS_FLASH_CFI 1
1b3b7c64 JCPV	135	#define CONFIG_FLASH_CFI_DRIVER 1
1b3b7c64 JCPV	136	#define PHYS_FLASH_1 0x10000000
6d0f6bcf JCPV	137	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	138	#define CONFIG_SYS_MAX_FLASH_SECT 256
	139	#define CONFIG_SYS_MAX_FLASH_BANKS 1
1b3b7c64 JCPV	140
	141	#define CONFIG_SYS_MONITOR_SEC 1:0-3
	142	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	143	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	144	#define CONFIG_ENV_IS_IN_FLASH 1
5e7d0917	145	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000)
1b3b7c64 JCPV	146	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
	147
	148	/* Address and size of Primary Environment Sector */
5e7d0917	149	#define CONFIG_ENV_SIZE 0x10000
1b3b7c64	150
1b3b7c64	151	#define CONFIG_EXTRA_ENV_SETTINGS \
93ea89f0	152	"monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
1b3b7c64 JCPV	153	"update=" \
	154	"protect off ${monitor_base} +${filesize};" \
	155	"erase ${monitor_base} +${filesize};" \
88461f16	156	"cp.b ${fileaddr} ${monitor_base} ${filesize};" \
1b3b7c64 JCPV	157	"protect on ${monitor_base} +${filesize}\0"
	158
	159	#ifndef CONFIG_SKIP_LOWLEVEL_INIT
	160	#define MASTER_PLL_MUL 171
	161	#define MASTER_PLL_DIV 14
1b34f00c	162	#define MASTER_PLL_OUT 3
1b3b7c64 JCPV	163
	164	/* clocks */
	165	#define CONFIG_SYS_MOR_VAL \
1b34f00c JS	166	(AT91_PMC_MOR_MOSCEN \| AT91_PMC_MOR_OSCOUNT(255))
	167	#define CONFIG_SYS_PLLAR_VAL \
	168	(AT91_PMC_PLLAR_29 \| \
	169	AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) \| \
	170	AT91_PMC_PLLXR_PLLCOUNT(63) \| \
	171	AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) \| \
	172	AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
1b3b7c64 JCPV	173
	174	/* PCK/2 = MCK Master Clock from PLLA */
	175	#define CONFIG_SYS_MCKR1_VAL \
1b34f00c JS	176	(AT91_PMC_MCKR_CSS_SLOW \| AT91_PMC_MCKR_PRES_1 \| \
	177	AT91_PMC_MCKR_MDIV_2)
	178
1b3b7c64 JCPV	179	/* PCK/2 = MCK Master Clock from PLLA */
1b3b7c64 JCPV	180	#define CONFIG_SYS_MCKR2_VAL \
1b34f00c JS	181	(AT91_PMC_MCKR_CSS_PLLA \| AT91_PMC_MCKR_PRES_1 \| \
1b34f00c JS	182	AT91_PMC_MCKR_MDIV_2)
1b3b7c64 JCPV	183
	184	/* define PDC[31:16] as DATA[31:16] */
	185	#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
	186	/* no pull-up for D[31:16] */
	187	#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
	188	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
1b34f00c JS	189	#define CONFIG_SYS_MATRIX_EBICSA_VAL \
	190	(AT91_MATRIX_CSA_DBPUC \| AT91_MATRIX_CSA_VDDIOMSEL_3_3V \| \
	191	AT91_MATRIX_CSA_EBI_CS1A)
1b3b7c64 JCPV	192
	193	/* SDRAM */
	194	/* SDRAMC_MR Mode register */
	195	#define CONFIG_SYS_SDRC_MR_VAL1 0
	196	/* SDRAMC_TR - Refresh Timer register */
	197	#define CONFIG_SYS_SDRC_TR_VAL1 0x13C
	198	/* SDRAMC_CR - Configuration register*/
	199	#define CONFIG_SYS_SDRC_CR_VAL \
	200	(AT91_SDRAMC_NC_9 \| \
	201	AT91_SDRAMC_NR_13 \| \
	202	AT91_SDRAMC_NB_4 \| \
	203	AT91_SDRAMC_CAS_3 \| \
	204	AT91_SDRAMC_DBW_32 \| \
	205	(1 << 8) \| /* Write Recovery Delay */ \
	206	(7 << 12) \| /* Row Cycle Delay */ \
	207	(2 << 16) \| /* Row Precharge Delay */ \
	208	(2 << 20) \| /* Row to Column Delay */ \
	209	(5 << 24) \| /* Active to Precharge Delay */ \
	210	(1 << 28)) /* Exit Self Refresh to Active Delay */
	211
	212	/* Memory Device Register -> SDRAM */
	213	#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
	214	#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
	215	#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
	216	#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
	217	#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
	218	#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
	219	#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
	220	#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
	221	#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
	222	#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
	223	#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
	224	#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
	225	#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
	226	#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
	227	#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
	228	#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
	229	#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
	230	#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
	231
	232	/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
1b34f00c JS	233	#define CONFIG_SYS_SMC0_SETUP0_VAL \
	234	(AT91_SMC_SETUP_NWE(10) \| AT91_SMC_SETUP_NCS_WR(10) \| \
	235	AT91_SMC_SETUP_NRD(10) \| AT91_SMC_SETUP_NCS_RD(10))
	236	#define CONFIG_SYS_SMC0_PULSE0_VAL \
	237	(AT91_SMC_PULSE_NWE(11) \| AT91_SMC_PULSE_NCS_WR(11) \| \
	238	AT91_SMC_PULSE_NRD(11) \| AT91_SMC_PULSE_NCS_RD(11))
1b3b7c64	239	#define CONFIG_SYS_SMC0_CYCLE0_VAL \
1b34f00c	240	(AT91_SMC_CYCLE_NWE(22) \| AT91_SMC_CYCLE_NRD(22))
1b3b7c64	241	#define CONFIG_SYS_SMC0_MODE0_VAL \
1b34f00c JS	242	(AT91_SMC_MODE_RM_NRD \| AT91_SMC_MODE_WM_NWE \| \
	243	AT91_SMC_MODE_DBW_16 \| \
	244	AT91_SMC_MODE_TDF \| AT91_SMC_MODE_TDF_CYCLE(6))
1b3b7c64 JCPV	245
	246	/* user reset enable */
	247	#define CONFIG_SYS_RSTC_RMR_VAL \
	248	(AT91_RSTC_KEY \| \
1b34f00c JS	249	AT91_RSTC_MR_URSTEN \| \
1b34f00c JS	250	AT91_RSTC_MR_ERSTL(15))
1b3b7c64 JCPV	251
	252	/* Disable Watchdog */
	253	#define CONFIG_SYS_WDTC_WDMR_VAL \
1b34f00c JS	254	(AT91_WDT_MR_WDIDLEHLT \| AT91_WDT_MR_WDDBGHLT \| \
	255	AT91_WDT_MR_WDV(0xfff) \| \
	256	AT91_WDT_MR_WDDIS \| \
	257	AT91_WDT_MR_WDD(0xfff))
	258
1b3b7c64 JCPV	259	#endif
	260
	261	#else
	262	#define CONFIG_SYS_NO_FLASH 1
8e429b3e SP	263	#endif
	264
	265	/* NAND flash */
74c076d6 JCPV	266	#ifdef CONFIG_CMD_NAND
74c076d6 JCPV	267	#define CONFIG_NAND_ATMEL
6d0f6bcf	268	#define CONFIG_SYS_MAX_NAND_DEVICE 1
cd46b0f2	269	#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
6d0f6bcf	270	#define CONFIG_SYS_NAND_DBW_8 1
74c076d6 JCPV	271	/* our ALE is AD21 */
	272	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	273	/* our CLE is AD22 */
	274	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
cd46b0f2 XH	275	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
cd46b0f2 XH	276	#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
74c076d6	277	#endif
8e429b3e SP	278
	279	/* Ethernet */
	280	#define CONFIG_MACB 1
	281	#define CONFIG_RMII 1
8e429b3e SP	282	#define CONFIG_NET_RETRY_COUNT 20
8e429b3e SP	283	#define CONFIG_RESET_PHY_R 1
4535a24c	284	#define CONFIG_AT91_WANTS_COMMON_PHY
8e429b3e SP	285
8e429b3e SP	286	/* USB */
2b7178af	287	#define CONFIG_USB_ATMEL
dcd2f1a0	288	#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
8e429b3e	289	#define CONFIG_USB_OHCI_NEW 1
8e429b3e	290	#define CONFIG_DOS_PARTITION 1
6d0f6bcf JCPV	291	#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
	292	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
	293	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
	294	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
8e429b3e	295	#define CONFIG_USB_STORAGE 1
3e0cda07	296	#define CONFIG_CMD_FAT 1
8e429b3e	297
6d0f6bcf	298	#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
8e429b3e	299
cd46b0f2	300	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
6d0f6bcf	301	#define CONFIG_SYS_MEMTEST_END 0x23e00000
8e429b3e	302
6d0f6bcf	303	#ifdef CONFIG_SYS_USE_DATAFLASH
8e429b3e SP	304
8e429b3e SP	305	/* bootstrap + u-boot + env + linux in dataflash on CS0 */
057c849c	306	#define CONFIG_ENV_IS_IN_DATAFLASH 1
6d0f6bcf	307	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
0e8d1586	308	#define CONFIG_ENV_OFFSET 0x4200
6d0f6bcf	309	#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
0e8d1586	310	#define CONFIG_ENV_SIZE 0x4200
e139cb31	311	#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
8e429b3e SP	312	#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
8e429b3e SP	313	"root=/dev/mtdblock0 " \
918319c7	314	"mtdparts=atmel_nand:-(root) "\
8e429b3e SP	315	"rw rootfstype=jffs2"
8e429b3e SP	316
1b3b7c64	317	#elif CONFIG_SYS_USE_NANDFLASH
8e429b3e SP	318
8e429b3e SP	319	/* bootstrap + u-boot + env + linux in nandflash */
cd46b0f2	320	#define CONFIG_ENV_IS_IN_NAND 1
0c58cfa9 BS	321	#define CONFIG_ENV_OFFSET 0xc0000
0c58cfa9 BS	322	#define CONFIG_ENV_OFFSET_REDUND 0x100000
0e8d1586	323	#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
0c58cfa9 BS	324	#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
	325	#define CONFIG_BOOTARGS \
	326	"console=ttyS0,115200 earlyprintk " \
	327	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	328	"256k(env),256k(env_redundant),256k(spare)," \
	329	"512k(dtb),6M(kernel)ro,-(rootfs) " \
	330	"root=/dev/mtdblock7 rw rootfstype=jffs2"
8e429b3e SP	331	#endif
8e429b3e SP	332
6d0f6bcf JCPV	333	#define CONFIG_SYS_PROMPT "U-Boot> "
	334	#define CONFIG_SYS_CBSIZE 256
	335	#define CONFIG_SYS_MAXARGS 16
	336	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	337	#define CONFIG_SYS_LONGHELP 1
cd46b0f2	338	#define CONFIG_CMDLINE_EDITING 1
03bab009 JCPV	339	#define CONFIG_AUTO_COMPLETE
03bab009 JCPV	340	#define CONFIG_SYS_HUSH_PARSER
8e429b3e	341
8e429b3e SP	342	/*
	343	* Size of malloc() pool
	344	*/
cd46b0f2	345	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
8e429b3e	346
8e429b3e	347	#endif