[people/ms/u-boot.git] / include / configs / cm_t35.h

/*
 * (C) Copyright 2011 CompuLab, Ltd.
 * Mike Rapoport <mike@compulab.co.il>
 * Igor Grinberg <grinberg@compulab.co.il>
 *
 * Based on omap3_beagle.h
 * (C) Copyright 2006-2008
 * Texas Instruments.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Syed Mohammed Khasim <x0khasim@ti.com>
 *
 * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_OMAP	/* in a TI OMAP core */
#define CONFIG_OMAP34XX	/* which is a 34XX */
#define CONFIG_OMAP_GPIO
#define CONFIG_CM_T3X	/* working with CM-T35 and CM-T3730 */
#define CONFIG_OMAP_COMMON

#define CONFIG_SYS_TEXT_BASE	0x80008000

#define CONFIG_SDRC	/* The chip has SDRC controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap3.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_OF_LIBFDT		1
/*
 * The early kernel mapping on ARM currently only maps from the base of DRAM
 * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
 * so that leaves DRAM base to DRAM base + 0x4000 available.
 */
#define CONFIG_SYS_BOOTMAPSZ	        0x4000

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SERIAL_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KiB */
					/* Sector */
#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + (128 << 10))

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3	/* UART3 */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}

#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION

/* USB */
#define CONFIG_USB_OMAP3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_USB_ULPI
#define CONFIG_USB_ULPI_VIEWPORT_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_MUSB_UDC
#define CONFIG_TWL4030_USB
#define CONFIG_CMD_USB

/* USB device configuration */
#define CONFIG_USB_DEVICE
#define CONFIG_USB_TTY
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/* commands to include */
#include <config_cmd_default.h>

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT		"nand0=nand"
#define MTDPARTS_DEFAULT	"mtdparts=nand:512k(x-loader),"\
				"1920k(u-boot),256k(u-boot-env),"\
				"4m(kernel),-(fs)"

#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_NAND		/* NAND support			*/
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING

#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
#undef CONFIG_CMD_IMLS		/* List all found images	*/

#define CONFIG_SYS_NO_FLASH
#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		1
#define CONFIG_DRIVER_OMAP34XX_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_I2C_MULTI_BUS

/*
 * TWL4030
 */
#define CONFIG_TWL4030_POWER
#define CONFIG_TWL4030_LED

/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_QUIET_TEST
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access nand at */
							/* CS0 */
#define GPMC_NAND_ECC_LP_x8_LAYOUT

#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
							/* devices */
/* Environment information */
#define CONFIG_BOOTDELAY		10
#define CONFIG_ZERO_BOOTDELAY_CHECK

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"usbtty=cdc_acm\0" \
	"console=ttyS2,115200n8\0" \
	"mpurate=500\0" \
	"vram=12M\0" \
	"dvimode=1024x768MR-16@60\0" \
	"defaultdisplay=dvi\0" \
	"mmcdev=0\0" \
	"mmcroot=/dev/mmcblk0p2 rw\0" \
	"mmcrootfstype=ext4 rootwait\0" \
	"nandroot=/dev/mtdblock4 rw\0" \
	"nandrootfstype=ubifs\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype}\0" \
	"nandargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype}\0" \
	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} 2a0000 400000; " \
		"bootm ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run nandboot; " \
			"fi; " \
		"fi; " \
	"else run nandboot; fi"

/*
 * Miscellaneous configurable options
 */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_TIMESTAMP
#define CONFIG_SYS_AUTOLOAD		"no"
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT		"CM-T3x # "
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
								/* works on */
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
							/* load address */

/*
 * OMAP3 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	/* CS1 is never populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */
/* Configure the PISMO */
#define PISMO1_NAND_SIZE		GPMC_SIZE_128M

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

#define CONFIG_ENV_IS_IN_NAND
#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CM_T3X_SMC911X_BASE	0x2C000000
#define SB_T35_SMC911X_BASE	(CM_T3X_SMC911X_BASE + (16 << 20))
#define CONFIG_SMC911X_BASE	CM_T3X_SMC911X_BASE
#endif /* (CONFIG_CMD_NET) */

/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR +	\
					 CONFIG_SYS_INIT_RAM_SIZE -	\
					 GENERATED_GBL_DATA_SIZE)

/* Status LED */
#define CONFIG_STATUS_LED		/* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_GREEN		0
#define STATUS_LED_BIT			STATUS_LED_GREEN
#define STATUS_LED_STATE		STATUS_LED_ON
#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT			STATUS_LED_BIT
#define GREEN_LED_GPIO			186 /* CM-T35 Green LED is GPIO186 */

#define CONFIG_SPLASHIMAGE_GUARD

/* GPIO banks */
#ifdef CONFIG_STATUS_LED
#define CONFIG_OMAP3_GPIO_6	/* GPIO186 is in GPIO bank 6  */
#endif

/* Display Configuration */
#define CONFIG_OMAP3_GPIO_2
#define CONFIG_VIDEO_OMAP3
#define LCD_BPP		LCD_COLOR16

#define CONFIG_LCD
#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP

#endif /* __CONFIG_H */
Commit	Line	Data
36b4e2dd	1	/*
9fc376be	2	* (C) Copyright 2011 CompuLab, Ltd.
36b4e2dd	3	* Mike Rapoport <mike@compulab.co.il>
dccd9a0b	4	* Igor Grinberg <grinberg@compulab.co.il>
36b4e2dd MR	5	*
	6	* Based on omap3_beagle.h
	7	* (C) Copyright 2006-2008
	8	* Texas Instruments.
	9	* Richard Woodruff <r-woodruff2@ti.com>
	10	* Syed Mohammed Khasim <x0khasim@ti.com>
	11	*
b65a77a8	12	* Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
36b4e2dd	13	*
1a459660	14	* SPDX-License-Identifier: GPL-2.0+
36b4e2dd MR	15	*/
	16
	17	#ifndef __CONFIG_H
	18	#define __CONFIG_H
	19
	20	/*
	21	* High Level Configuration Options
	22	*/
9fc376be NK	23	#define CONFIG_OMAP /* in a TI OMAP core */
9fc376be NK	24	#define CONFIG_OMAP34XX /* which is a 34XX */
308252ad	25	#define CONFIG_OMAP_GPIO
9fc376be	26	#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
806d2792	27	#define CONFIG_OMAP_COMMON
36b4e2dd MR	28
	29	#define CONFIG_SYS_TEXT_BASE 0x80008000
	30
	31	#define CONFIG_SDRC /* The chip has SDRC controller */
	32
	33	#include <asm/arch/cpu.h> /* get chip and board defs */
	34	#include <asm/arch/omap3.h>
	35
	36	/*
	37	* Display CPU and Board information
	38	*/
9fc376be NK	39	#define CONFIG_DISPLAY_CPUINFO
9fc376be NK	40	#define CONFIG_DISPLAY_BOARDINFO
36b4e2dd MR	41
	42	/* Clock Defines */
	43	#define V_OSCK 26000000 /* Clock output from T2 */
	44	#define V_SCLK (V_OSCK >> 1)
	45
36b4e2dd MR	46	#define CONFIG_MISC_INIT_R
	47
	48	#define CONFIG_OF_LIBFDT 1
	49	/*
	50	* The early kernel mapping on ARM currently only maps from the base of DRAM
	51	* to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
	52	* The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
	53	* so that leaves DRAM base to DRAM base + 0x4000 available.
	54	*/
	55	#define CONFIG_SYS_BOOTMAPSZ 0x4000
	56
9fc376be NK	57	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	58	#define CONFIG_SETUP_MEMORY_TAGS
	59	#define CONFIG_INITRD_TAG
	60	#define CONFIG_REVISION_TAG
82309250	61	#define CONFIG_SERIAL_TAG
36b4e2dd MR	62
	63	/*
	64	* Size of malloc() pool
	65	*/
390cdcda	66	#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
9fc376be NK	67	/* Sector */
9fc376be NK	68	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
36b4e2dd MR	69
	70	/*
	71	* Hardware drivers
	72	*/
	73
	74	/*
	75	* NS16550 Configuration
	76	*/
	77	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	78
	79	#define CONFIG_SYS_NS16550
	80	#define CONFIG_SYS_NS16550_SERIAL
	81	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	82	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	83
	84	/*
	85	* select serial console configuration
	86	*/
	87	#define CONFIG_CONS_INDEX 3
	88	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	89	#define CONFIG_SERIAL3 3 /* UART3 */
	90
	91	/* allow to overwrite serial and ethaddr */
	92	#define CONFIG_ENV_OVERWRITE
	93	#define CONFIG_BAUDRATE 115200
	94	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	95	115200}
9fc376be NK	96
	97	#define CONFIG_GENERIC_MMC
	98	#define CONFIG_MMC
	99	#define CONFIG_OMAP_HSMMC
	100	#define CONFIG_DOS_PARTITION
36b4e2dd	101
36b4e2dd	102	/* USB */
9fc376be	103	#define CONFIG_USB_OMAP3
854a7836 NK	104	#define CONFIG_USB_EHCI
	105	#define CONFIG_USB_EHCI_OMAP
	106	#define CONFIG_USB_ULPI
	107	#define CONFIG_USB_ULPI_VIEWPORT_OMAP
	108	#define CONFIG_USB_STORAGE
	109	#define CONFIG_MUSB_UDC
9fc376be	110	#define CONFIG_TWL4030_USB
854a7836	111	#define CONFIG_CMD_USB
36b4e2dd MR	112
36b4e2dd MR	113	/* USB device configuration */
9fc376be NK	114	#define CONFIG_USB_DEVICE
	115	#define CONFIG_USB_TTY
	116	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
36b4e2dd MR	117
	118	/* commands to include */
	119	#include <config_cmd_default.h>
	120
	121	#define CONFIG_CMD_CACHE
	122	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	123	#define CONFIG_CMD_FAT /* FAT support */
36b4e2dd MR	124	#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
36b4e2dd MR	125	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
0b800a6b	126	#define CONFIG_MTD_PARTITIONS
9fc376be NK	127	#define MTDIDS_DEFAULT "nand0=nand"
9fc376be NK	128	#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
0b800a6b	129	"1920k(u-boot),256k(u-boot-env),"\
9fc376be	130	"4m(kernel),-(fs)"
36b4e2dd MR	131
	132	#define CONFIG_CMD_I2C /* I2C serial bus support */
	133	#define CONFIG_CMD_MMC /* MMC support */
	134	#define CONFIG_CMD_NAND /* NAND support */
	135	#define CONFIG_CMD_DHCP
	136	#define CONFIG_CMD_PING
	137
	138	#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
	139	#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
	140	#undef CONFIG_CMD_IMLS /* List all found images */
	141
	142	#define CONFIG_SYS_NO_FLASH
9fc376be	143	#define CONFIG_HARD_I2C
36b4e2dd MR	144	#define CONFIG_SYS_I2C_SPEED 100000
36b4e2dd MR	145	#define CONFIG_SYS_I2C_SLAVE 1
9fc376be	146	#define CONFIG_DRIVER_OMAP34XX_I2C
82309250 NK	147	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
82309250 NK	148	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
79874ae9	149	#define CONFIG_I2C_MULTI_BUS
36b4e2dd MR	150
	151	/*
	152	* TWL4030
	153	*/
9fc376be NK	154	#define CONFIG_TWL4030_POWER
9fc376be NK	155	#define CONFIG_TWL4030_LED
36b4e2dd MR	156
	157	/*
	158	* Board NAND Info.
	159	*/
9fc376be	160	#define CONFIG_SYS_NAND_QUIET_TEST
36b4e2dd MR	161	#define CONFIG_NAND_OMAP_GPMC
	162	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	163	/* to access nand */
	164	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	165	/* to access nand at */
	166	/* CS0 */
816e3921	167	#define GPMC_NAND_ECC_LP_x8_LAYOUT
36b4e2dd MR	168
	169	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
	170	/* devices */
36b4e2dd MR	171	/* Environment information */
36b4e2dd MR	172	#define CONFIG_BOOTDELAY 10
9bd5c1ad	173	#define CONFIG_ZERO_BOOTDELAY_CHECK
36b4e2dd MR	174
	175	#define CONFIG_EXTRA_ENV_SETTINGS \
	176	"loadaddr=0x82000000\0" \
	177	"usbtty=cdc_acm\0" \
	178	"console=ttyS2,115200n8\0" \
	179	"mpurate=500\0" \
	180	"vram=12M\0" \
	181	"dvimode=1024x768MR-16@60\0" \
	182	"defaultdisplay=dvi\0" \
	183	"mmcdev=0\0" \
	184	"mmcroot=/dev/mmcblk0p2 rw\0" \
0b800a6b	185	"mmcrootfstype=ext4 rootwait\0" \
36b4e2dd	186	"nandroot=/dev/mtdblock4 rw\0" \
0b800a6b	187	"nandrootfstype=ubifs\0" \
36b4e2dd MR	188	"mmcargs=setenv bootargs console=${console} " \
	189	"mpurate=${mpurate} " \
	190	"vram=${vram} " \
	191	"omapfb.mode=dvi:${dvimode} " \
	192	"omapfb.debug=y " \
	193	"omapdss.def_disp=${defaultdisplay} " \
	194	"root=${mmcroot} " \
	195	"rootfstype=${mmcrootfstype}\0" \
	196	"nandargs=setenv bootargs console=${console} " \
	197	"mpurate=${mpurate} " \
	198	"vram=${vram} " \
	199	"omapfb.mode=dvi:${dvimode} " \
	200	"omapfb.debug=y " \
	201	"omapdss.def_disp=${defaultdisplay} " \
	202	"root=${nandroot} " \
	203	"rootfstype=${nandrootfstype}\0" \
	204	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	205	"bootscript=echo Running bootscript from mmc ...; " \
	206	"source ${loadaddr}\0" \
	207	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	208	"mmcboot=echo Booting from mmc ...; " \
	209	"run mmcargs; " \
	210	"bootm ${loadaddr}\0" \
	211	"nandboot=echo Booting from nand ...; " \
	212	"run nandargs; " \
0b800a6b	213	"nand read ${loadaddr} 2a0000 400000; " \
36b4e2dd MR	214	"bootm ${loadaddr}\0" \
	215
	216	#define CONFIG_BOOTCOMMAND \
66968110	217	"mmc dev ${mmcdev}; if mmc rescan; then " \
36b4e2dd MR	218	"if run loadbootscript; then " \
	219	"run bootscript; " \
	220	"else " \
	221	"if run loaduimage; then " \
	222	"run mmcboot; " \
	223	"else run nandboot; " \
	224	"fi; " \
	225	"fi; " \
	226	"else run nandboot; fi"
	227
36b4e2dd MR	228	/*
	229	* Miscellaneous configurable options
	230	*/
41d7e702 IG	231	#define CONFIG_AUTO_COMPLETE
	232	#define CONFIG_CMDLINE_EDITING
	233	#define CONFIG_TIMESTAMP
9fc376be	234	#define CONFIG_SYS_AUTOLOAD "no"
36b4e2dd MR	235	#define CONFIG_SYS_LONGHELP /* undef to save memory */
36b4e2dd MR	236	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
b65a77a8	237	#define CONFIG_SYS_PROMPT "CM-T3x # "
36b4e2dd MR	238	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	239	/* Print Buffer Size */
	240	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	241	sizeof(CONFIG_SYS_PROMPT) + 16)
	242	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	243	/* Boot Argument Buffer Size */
	244	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	245
	246	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
	247	/* works on */
	248	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	249	0x01F00000) /* 31MB */
	250
	251	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
	252	/* load address */
	253
	254	/*
	255	* OMAP3 has 12 GP timers, they can be driven by the system clock
	256	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	257	* This rate is divided by a local divisor.
	258	*/
	259	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
	260	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
36b4e2dd	261
36b4e2dd MR	262	/*-----------------------------------------------------------------------
	263	* Physical Memory Map
	264	*/
	265	#define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */
	266	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
36b4e2dd	267
36b4e2dd MR	268	/*-----------------------------------------------------------------------
	269	* FLASH and environment organization
	270	*/
	271
	272	/* ** PISMO SUPPORT * */
36b4e2dd MR	273	/* Configure the PISMO */
36b4e2dd MR	274	#define PISMO1_NAND_SIZE GPMC_SIZE_128M
36b4e2dd MR	275
	276	/* Monitor at start of flash */
	277	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
3530a35d	278	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
36b4e2dd	279
9fc376be	280	#define CONFIG_ENV_IS_IN_NAND
36b4e2dd	281	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
6cbec7b3	282	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
36b4e2dd MR	283	#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
36b4e2dd MR	284
36b4e2dd	285	#if defined(CONFIG_CMD_NET)
36b4e2dd MR	286	#define CONFIG_SMC911X
36b4e2dd MR	287	#define CONFIG_SMC911X_32_BIT
b65a77a8 IG	288	#define CM_T3X_SMC911X_BASE 0x2C000000
	289	#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20))
	290	#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE
36b4e2dd MR	291	#endif /* (CONFIG_CMD_NET) */
	292
	293	/* additions for new relocation code, must be added to all boards */
	294	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	295	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	296	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	297	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	298	CONFIG_SYS_INIT_RAM_SIZE - \
	299	GENERATED_GBL_DATA_SIZE)
	300
2b8754b2	301	/* Status LED */
9fc376be NK	302	#define CONFIG_STATUS_LED /* Status LED enabled */
9fc376be NK	303	#define CONFIG_BOARD_SPECIFIC_LED
2b8754b2 IG	304	#define STATUS_LED_GREEN 0
	305	#define STATUS_LED_BIT STATUS_LED_GREEN
	306	#define STATUS_LED_STATE STATUS_LED_ON
	307	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
	308	#define STATUS_LED_BOOT STATUS_LED_BIT
	309	#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
	310
60e6bdcc NK	311	#define CONFIG_SPLASHIMAGE_GUARD
60e6bdcc NK	312
2b8754b2 IG	313	/* GPIO banks */
2b8754b2 IG	314	#ifdef CONFIG_STATUS_LED
9fc376be	315	#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
2b8754b2 IG	316	#endif
2b8754b2 IG	317
7878ca51 NK	318	/* Display Configuration */
	319	#define CONFIG_OMAP3_GPIO_2
	320	#define CONFIG_VIDEO_OMAP3
	321	#define LCD_BPP LCD_COLOR16
	322
	323	#define CONFIG_LCD
f35034fe NK	324	#define CONFIG_SPLASH_SCREEN
	325	#define CONFIG_CMD_BMP
	326	#define CONFIG_BMP_16BPP
7878ca51	327
36b4e2dd	328	#endif /* __CONFIG_H */