[people/ms/u-boot.git] / include / configs / colibri_vf.h

/*
 * Copyright 2015 Toradex, Inc.
 *
 * Configuration settings for the Toradex VF50/VF61 module.
 *
 * Based on vf610twr.h:
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_SYS_CACHELINE_SIZE	32

#include <asm/arch/imx-regs.h>

#define CONFIG_VF610
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_SYS_FSL_CLK

#define CONFIG_ARCH_MISC_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_VERSION_VARIABLE
#define CONFIG_BAUDRATE			115200
#define CONFIG_CMD_ASKENV

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nand0=vf610_nfc"
#define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
				"128k(vf-bcb)ro,"		\
				"1408k(u-boot)ro,"		\
				"512k(u-boot-env),"		\
				"-(ubi)"

#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_SYS_FSL_ERRATUM_ESDHC111

#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT4
#define CONFIG_DOS_PARTITION

#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_UBI
#define CONFIG_MTD_UBI_FASTMAP
#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET1_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_IPADDR		192.168.10.2
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_SERVERIP		192.168.10.1

#define CONFIG_BOOTDELAY		1
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_LOADADDR			0x80008000
#define CONFIG_FDTADDR			0x84000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	"dhcp ${kernel_addr_r} && "	\
	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define UBI_BOOTCMD	\
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"kernel_file=zImage\0" \
	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	"fdt_board=eval-v3\0" \
	"defargs=\0" \
	"console=ttyLP0\0" \
	"setup=setenv setupargs " \
	"console=tty1 console=${console}" \
	",${baudrate}n8 ${memargs}\0" \
	"setsdupdate=mmc rescan && set interface mmc && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setusbupdate=usb start && set interface usb && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setupdate=run setsdupdate || run setusbupdate\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
	SD_BOOTCMD \
	NFS_BOOTCMD \
	UBI_BOOTCMD

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_SYS_NO_FLASH

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_RANGE		(4 * 64 * 2048)
#define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
#endif

#define CONFIG_CMD_BOOTZ

#define CONFIG_SYS_NO_FLASH

#define CONFIG_SYS_CACHELINE_SIZE 32

/* USB Host Support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

/* USB Client Support */
#define CONFIG_TRDX_VID                  0x1B67
#define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
#define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
#define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
#define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019

/* USB DFU */
#define CONFIG_CMD_DFU
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_NAND
#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)

/* USB Storage */
#define CONFIG_USB_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE

#endif /* __CONFIG_H */
Commit	Line	Data
e7b860fa SM	1	/*
	2	* Copyright 2015 Toradex, Inc.
	3	*
	4	* Configuration settings for the Toradex VF50/VF61 module.
	5	*
	6	* Based on vf610twr.h:
	7	* Copyright 2013 Freescale Semiconductor, Inc.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
3709844f AA	15	#define CONFIG_SYS_CACHELINE_SIZE 32
3709844f AA	16
e7b860fa	17	#include <asm/arch/imx-regs.h>
e7b860fa SM	18
	19	#define CONFIG_VF610
	20	#define CONFIG_SYS_THUMB_BUILD
	21	#define CONFIG_USE_ARCH_MEMCPY
	22	#define CONFIG_USE_ARCH_MEMSET
18fb0e3c	23	#define CONFIG_SYS_FSL_CLK
e7b860fa	24
e7b860fa SM	25	#define CONFIG_ARCH_MISC_INIT
	26	#define CONFIG_DISPLAY_CPUINFO
	27	#define CONFIG_DISPLAY_BOARDINFO
	28
	29	#define CONFIG_SKIP_LOWLEVEL_INIT
	30
	31	#define CONFIG_CMD_FUSE
	32	#ifdef CONFIG_CMD_FUSE
	33	#define CONFIG_MXC_OCOTP
	34	#endif
	35
	36	/* Size of malloc() pool */
	37	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	38
	39	#define CONFIG_BOARD_EARLY_INIT_F
	40
e7b860fa SM	41	/* Allow to overwrite serial and ethaddr */
	42	#define CONFIG_ENV_OVERWRITE
	43	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	44	#define CONFIG_VERSION_VARIABLE
e7b860fa SM	45	#define CONFIG_BAUDRATE 115200
	46	#define CONFIG_CMD_ASKENV
	47
	48	/* NAND support */
	49	#define CONFIG_CMD_NAND
8fca2d8c	50	#define CONFIG_SYS_NAND_ONFI_DETECTION
e7b860fa SM	51	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	52	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	53
	54	/* Dynamic MTD partition support */
	55	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	56	#define CONFIG_MTD_PARTITIONS
	57	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	58	#define MTDIDS_DEFAULT "nand0=vf610_nfc"
	59	#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
	60	"128k(vf-bcb)ro," \
	61	"1408k(u-boot)ro," \
	62	"512k(u-boot-env)," \
	63	"-(ubi)"
	64
e7b860fa SM	65	#define CONFIG_MMC
	66	#define CONFIG_FSL_ESDHC
	67	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	68	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	69
	70	#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
	71
	72	#define CONFIG_CMD_MMC
	73	#define CONFIG_GENERIC_MMC
	74	#define CONFIG_CMD_FAT
e7b860fa SM	75	#define CONFIG_CMD_EXT4
	76	#define CONFIG_DOS_PARTITION
	77
	78	#define CONFIG_RBTREE
	79	#define CONFIG_LZO
	80	#define CONFIG_CMD_FS_GENERIC
	81	#define CONFIG_CMD_BOOTZ
	82	#define CONFIG_CMD_UBI
	83	#define CONFIG_MTD_UBI_FASTMAP
	84	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
	85
e7b860fa	86	#define CONFIG_CMD_MII
e7b860fa SM	87	#define CONFIG_FEC_MXC
	88	#define CONFIG_MII
	89	#define IMX_FEC_BASE ENET1_BASE_ADDR
	90	#define CONFIG_FEC_XCV_TYPE RMII
	91	#define CONFIG_FEC_MXC_PHYADDR 0
	92	#define CONFIG_PHYLIB
	93	#define CONFIG_PHY_MICREL
	94
	95	#define CONFIG_IPADDR 192.168.10.2
	96	#define CONFIG_NETMASK 255.255.255.0
	97	#define CONFIG_SERVERIP 192.168.10.1
	98
	99	#define CONFIG_BOOTDELAY 1
	100	#define CONFIG_BOARD_LATE_INIT
	101
	102	#define CONFIG_LOADADDR 0x80008000
	103	#define CONFIG_FDTADDR 0x84000000
	104
	105	/* We boot from the gfxRAM area of the OCRAM. */
	106	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	107	#define CONFIG_BOARD_SIZE_LIMIT 524288
	108
	109	#define SD_BOOTCMD \
	110	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	111	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	112	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	113	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	114	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	115	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	116
	117	#define NFS_BOOTCMD \
	118	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	119	"nfsboot=run setup; " \
	120	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	121	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	122	"dhcp ${kernel_addr_r} && " \
	123	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	124	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	125
	126	#define UBI_BOOTCMD \
	127	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	128	"ubi.fm_autoconvert=1\0" \
	129	"ubiboot=run setup; " \
	130	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
	131	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	132	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	133	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	134	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	135	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	136
	137	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
	138
bba97cd2 SM	139	#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
bba97cd2 SM	140
e7b860fa SM	141	#define CONFIG_EXTRA_ENV_SETTINGS \
	142	"kernel_addr_r=0x82000000\0" \
	143	"fdt_addr_r=0x84000000\0" \
	144	"kernel_file=zImage\0" \
	145	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	146	"fdt_board=eval-v3\0" \
	147	"defargs=\0" \
	148	"console=ttyLP0\0" \
	149	"setup=setenv setupargs " \
	150	"console=tty1 console=${console}" \
	151	",${baudrate}n8 ${memargs}\0" \
	152	"setsdupdate=mmc rescan && set interface mmc && " \
	153	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	154	"source ${loadaddr}\0" \
	155	"setusbupdate=usb start && set interface usb && " \
	156	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	157	"source ${loadaddr}\0" \
	158	"setupdate=run setsdupdate \|\| run setusbupdate\0" \
	159	"mtdparts=" MTDPARTS_DEFAULT "\0" \
bba97cd2	160	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
e7b860fa SM	161	SD_BOOTCMD \
	162	NFS_BOOTCMD \
	163	UBI_BOOTCMD
	164
	165	/* Miscellaneous configurable options */
	166	#define CONFIG_SYS_LONGHELP /* undef to save memory */
e7b860fa	167	#undef CONFIG_AUTO_COMPLETE
aa5a0d98	168	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
e7b860fa SM	169	#define CONFIG_SYS_PBSIZE \
	170	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	171	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	172	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	173
e7b860fa SM	174	#define CONFIG_SYS_MEMTEST_START 0x80010000
	175	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	176
	177	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	178	#define CONFIG_SYS_HZ 1000
	179	#define CONFIG_CMDLINE_EDITING
	180
	181	/*
	182	* Stack sizes
	183	* The stack sizes are set up in start.S using the settings below
	184	*/
	185	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	186
	187	/* Physical memory map */
	188	#define CONFIG_NR_DRAM_BANKS 1
	189	#define PHYS_SDRAM (0x80000000)
	190	#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
	191
	192	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	193	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	194	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	195
	196	#define CONFIG_SYS_INIT_SP_OFFSET \
	197	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	198	#define CONFIG_SYS_INIT_SP_ADDR \
	199	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	200
	201	/* Environment organization */
	202	#define CONFIG_SYS_NO_FLASH
	203
	204	#ifdef CONFIG_ENV_IS_IN_MMC
	205	#define CONFIG_SYS_MMC_ENV_DEV 0
	206	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	207	#define CONFIG_ENV_SIZE (8 * 1024)
	208	#endif
	209
	210	#ifdef CONFIG_ENV_IS_IN_NAND
	211	#define CONFIG_ENV_SIZE (64 * 2048)
	212	#define CONFIG_ENV_RANGE (4 * 64 * 2048)
	213	#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
	214	#endif
	215
e7b860fa SM	216	#define CONFIG_CMD_BOOTZ
	217
	218	#define CONFIG_SYS_NO_FLASH
	219
	220	#define CONFIG_SYS_CACHELINE_SIZE 32
	221
bba97cd2	222	/* USB Host Support */
bba97cd2 SM	223	#define CONFIG_USB_EHCI
	224	#define CONFIG_USB_EHCI_VF
	225	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	226	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	227
	228	/* USB Client Support */
bba97cd2 SM	229	#define CONFIG_TRDX_VID 0x1B67
	230	#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
	231	#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
	232	#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
	233	#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
bba97cd2 SM	234
bba97cd2 SM	235	/* USB DFU */
bba97cd2	236	#define CONFIG_CMD_DFU
01acd6ab	237	#define CONFIG_USB_FUNCTION_DFU
bba97cd2 SM	238	#define CONFIG_DFU_NAND
	239	#define CONFIG_DFU_MMC
	240	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
	241
	242	/* USB Storage */
	243	#define CONFIG_USB_STORAGE
01acd6ab	244	#define CONFIG_USB_FUNCTION_MASS_STORAGE
bba97cd2 SM	245	#define CONFIG_CMD_USB_MASS_STORAGE
bba97cd2 SM	246
e7b860fa	247	#endif /* __CONFIG_H */