[people/ms/u-boot.git] / include / configs / colibri_vf.h

/*
 * Copyright 2015-2016 Toradex, Inc.
 *
 * Configuration settings for the Toradex VF50/VF61 modules.
 *
 * Based on vf610twr.h:
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

#define CONFIG_VF610
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_FSL_CLK

#define CONFIG_ARCH_MISC_INIT
#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_BAUDRATE			115200

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nand0=vf610_nfc"
#define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
				"128k(vf-bcb)ro,"		\
				"1408k(u-boot)ro,"		\
				"512k(u-boot-env),"		\
				"-(ubi)"

#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION

#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET1_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_IPADDR		192.168.10.2
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_SERVERIP		192.168.10.1

#define CONFIG_BOARD_LATE_INIT

#define CONFIG_LOADADDR			0x80008000
#define CONFIG_FDTADDR			0x84000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	"dhcp ${kernel_addr_r} && "	\
	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define UBI_BOOTCMD	\
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	"ubi part ubi && " \
	"ubi read ${kernel_addr_r} kernel && " \
	"ubi read ${fdt_addr_r} dtb && " \
	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"kernel_file=zImage\0" \
	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	"fdt_board=eval-v3\0" \
	"fdt_fixup=;\0" \
	"defargs=\0" \
	"console=ttyLP0\0" \
	"setup=setenv setupargs " \
	"console=tty1 console=${console}" \
	",${baudrate}n8 ${memargs}\0" \
	"setsdupdate=mmc rescan && set interface mmc && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setusbupdate=usb start && set interface usb && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setupdate=run setsdupdate || run setusbupdate\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
	SD_BOOTCMD \
	NFS_BOOTCMD \
	UBI_BOOTCMD

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_SYS_NO_FLASH

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_RANGE		(4 * 64 * 2048)
#define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
#endif

#define CONFIG_SYS_NO_FLASH

/* USB Host Support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

/* USB DFU */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)

/* USB Storage */
#define CONFIG_USB_FUNCTION_MASS_STORAGE

#endif /* __CONFIG_H */
Commit	Line	Data
e7b860fa	1	/*
b891d010	2	* Copyright 2015-2016 Toradex, Inc.
e7b860fa	3	*
b891d010	4	* Configuration settings for the Toradex VF50/VF61 modules.
e7b860fa SM	5	*
	6	* Based on vf610twr.h:
	7	* Copyright 2013 Freescale Semiconductor, Inc.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	#include <asm/arch/imx-regs.h>
e7b860fa SM	16
	17	#define CONFIG_VF610
	18	#define CONFIG_SYS_THUMB_BUILD
18fb0e3c	19	#define CONFIG_SYS_FSL_CLK
e7b860fa	20
e7b860fa	21	#define CONFIG_ARCH_MISC_INIT
b891d010	22	#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
e7b860fa SM	23
	24	#define CONFIG_SKIP_LOWLEVEL_INIT
	25
	26	#define CONFIG_CMD_FUSE
	27	#ifdef CONFIG_CMD_FUSE
	28	#define CONFIG_MXC_OCOTP
	29	#endif
	30
	31	/* Size of malloc() pool */
	32	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	33
	34	#define CONFIG_BOARD_EARLY_INIT_F
	35
e7b860fa SM	36	/* Allow to overwrite serial and ethaddr */
e7b860fa SM	37	#define CONFIG_ENV_OVERWRITE
b891d010	38	#define CONFIG_ENV_VARS_UBOOT_CONFIG
e7b860fa	39	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
e7b860fa	40	#define CONFIG_BAUDRATE 115200
e7b860fa SM	41
	42	/* NAND support */
	43	#define CONFIG_CMD_NAND
8fca2d8c	44	#define CONFIG_SYS_NAND_ONFI_DETECTION
e7b860fa SM	45	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	46	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	47
	48	/* Dynamic MTD partition support */
	49	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	50	#define CONFIG_MTD_PARTITIONS
	51	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	52	#define MTDIDS_DEFAULT "nand0=vf610_nfc"
	53	#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
	54	"128k(vf-bcb)ro," \
	55	"1408k(u-boot)ro," \
	56	"512k(u-boot-env)," \
	57	"-(ubi)"
	58
e7b860fa SM	59	#define CONFIG_FSL_ESDHC
	60	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	61	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	62
e7b860fa	63	#define CONFIG_GENERIC_MMC
e7b860fa SM	64	#define CONFIG_DOS_PARTITION
	65
	66	#define CONFIG_RBTREE
	67	#define CONFIG_LZO
e7b860fa SM	68	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
e7b860fa SM	69
e7b860fa SM	70	#define CONFIG_FEC_MXC
	71	#define CONFIG_MII
	72	#define IMX_FEC_BASE ENET1_BASE_ADDR
	73	#define CONFIG_FEC_XCV_TYPE RMII
	74	#define CONFIG_FEC_MXC_PHYADDR 0
	75	#define CONFIG_PHYLIB
	76	#define CONFIG_PHY_MICREL
	77
	78	#define CONFIG_IPADDR 192.168.10.2
	79	#define CONFIG_NETMASK 255.255.255.0
	80	#define CONFIG_SERVERIP 192.168.10.1
	81
e7b860fa SM	82	#define CONFIG_BOARD_LATE_INIT
	83
	84	#define CONFIG_LOADADDR 0x80008000
	85	#define CONFIG_FDTADDR 0x84000000
	86
	87	/* We boot from the gfxRAM area of the OCRAM. */
	88	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	89	#define CONFIG_BOARD_SIZE_LIMIT 524288
	90
	91	#define SD_BOOTCMD \
	92	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	93	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	94	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	95	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	96	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
faf1e62b	97	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
e7b860fa SM	98
	99	#define NFS_BOOTCMD \
	100	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	101	"nfsboot=run setup; " \
	102	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	103	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	104	"dhcp ${kernel_addr_r} && " \
	105	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
faf1e62b	106	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
e7b860fa SM	107
	108	#define UBI_BOOTCMD \
	109	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	110	"ubi.fm_autoconvert=1\0" \
	111	"ubiboot=run setup; " \
	112	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
	113	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
3ed82d6f SM	114	"ubi part ubi && " \
	115	"ubi read ${kernel_addr_r} kernel && " \
	116	"ubi read ${fdt_addr_r} dtb && " \
faf1e62b	117	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
e7b860fa SM	118
	119	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
	120
bba97cd2 SM	121	#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
bba97cd2 SM	122
e7b860fa SM	123	#define CONFIG_EXTRA_ENV_SETTINGS \
	124	"kernel_addr_r=0x82000000\0" \
	125	"fdt_addr_r=0x84000000\0" \
	126	"kernel_file=zImage\0" \
	127	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	128	"fdt_board=eval-v3\0" \
faf1e62b	129	"fdt_fixup=;\0" \
e7b860fa SM	130	"defargs=\0" \
	131	"console=ttyLP0\0" \
	132	"setup=setenv setupargs " \
	133	"console=tty1 console=${console}" \
	134	",${baudrate}n8 ${memargs}\0" \
	135	"setsdupdate=mmc rescan && set interface mmc && " \
	136	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	137	"source ${loadaddr}\0" \
	138	"setusbupdate=usb start && set interface usb && " \
	139	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	140	"source ${loadaddr}\0" \
	141	"setupdate=run setsdupdate \|\| run setusbupdate\0" \
	142	"mtdparts=" MTDPARTS_DEFAULT "\0" \
bba97cd2	143	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
e7b860fa SM	144	SD_BOOTCMD \
	145	NFS_BOOTCMD \
	146	UBI_BOOTCMD
	147
	148	/* Miscellaneous configurable options */
	149	#define CONFIG_SYS_LONGHELP /* undef to save memory */
e7b860fa	150	#undef CONFIG_AUTO_COMPLETE
aa5a0d98	151	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
e7b860fa SM	152	#define CONFIG_SYS_PBSIZE \
	153	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	154	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	155	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	156
e7b860fa SM	157	#define CONFIG_SYS_MEMTEST_START 0x80010000
	158	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	159
	160	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	161	#define CONFIG_SYS_HZ 1000
	162	#define CONFIG_CMDLINE_EDITING
	163
	164	/*
	165	* Stack sizes
	166	* The stack sizes are set up in start.S using the settings below
	167	*/
	168	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	169
	170	/* Physical memory map */
	171	#define CONFIG_NR_DRAM_BANKS 1
	172	#define PHYS_SDRAM (0x80000000)
	173	#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
	174
	175	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	176	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	177	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	178
	179	#define CONFIG_SYS_INIT_SP_OFFSET \
	180	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	181	#define CONFIG_SYS_INIT_SP_ADDR \
	182	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	183
	184	/* Environment organization */
	185	#define CONFIG_SYS_NO_FLASH
	186
	187	#ifdef CONFIG_ENV_IS_IN_MMC
	188	#define CONFIG_SYS_MMC_ENV_DEV 0
	189	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	190	#define CONFIG_ENV_SIZE (8 * 1024)
	191	#endif
	192
	193	#ifdef CONFIG_ENV_IS_IN_NAND
	194	#define CONFIG_ENV_SIZE (64 * 2048)
	195	#define CONFIG_ENV_RANGE (4 * 64 * 2048)
	196	#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
	197	#endif
	198
e7b860fa SM	199	#define CONFIG_SYS_NO_FLASH
e7b860fa SM	200
bba97cd2	201	/* USB Host Support */
bba97cd2 SM	202	#define CONFIG_USB_EHCI
	203	#define CONFIG_USB_EHCI_VF
	204	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	205	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	206
bba97cd2	207	/* USB DFU */
bba97cd2 SM	208	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
	209
	210	/* USB Storage */
01acd6ab	211	#define CONFIG_USB_FUNCTION_MASS_STORAGE
bba97cd2	212
e7b860fa	213	#endif /* __CONFIG_H */