[people/ms/u-boot.git] / include / configs / gw_ventana.h

/*
 * Copyright (C) 2013 Gateworks Corporation
 *
 * SPDX-License-Identifier: GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SPL */
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)

/* Falcon Mode */
#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000

/* Falcon Mode - NAND support: args@17MB kernel@18MB */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	(18 * SZ_1M)

/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x800	/* 1MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	(CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x1000	/* 2MB */

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"
#define CONFIG_DISPLAY_BOARDINFO_LATE

#define CONFIG_MACH_TYPE	4520   /* Gateworks Ventana Platform */

/* Serial ATAG */
#define CONFIG_SERIAL_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

/* Init Functions */
#define CONFIG_MISC_INIT_R

/* Driver Model */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_DM_GPIO
#define CONFIG_DM_THERMAL
#endif

/* Thermal */
#define CONFIG_IMX_THERMAL

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#ifdef CONFIG_SPI_FLASH

/* SPI */
#ifdef CONFIG_CMD_SF
  #define CONFIG_SPI_FLASH_MTD
  #define CONFIG_SPI_FLASH_BAR
  #define CONFIG_SF_DEFAULT_BUS              0
  #define CONFIG_SF_DEFAULT_CS               0
					     /* GPIO 3-19 (21248) */
  #define CONFIG_SF_DEFAULT_SPEED            30000000
  #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
#endif

#elif defined(CONFIG_SPL_NAND_SUPPORT)
/* Enable NAND support */
#ifdef CONFIG_CMD_NAND
  #define CONFIG_SYS_MAX_NAND_DEVICE	1
  #define CONFIG_SYS_NAND_BASE		0x40000000
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_ONFI_DETECTION

  /* DMA stuff, needed for GPMI/MXS NAND support */
#endif

#endif /* CONFIG_SPI_FLASH */

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_GSC			0
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* eMMC Configs */
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SUPPORT_EMMC_RPMB

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48
#endif

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#endif

/*
 * PMIC
 */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
#define CONFIG_POWER_LTC3676
#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c

/* Various command support */
#define CONFIG_CMD_UNZIP         /* gzwrite */

/* Ethernet support */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE             ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE      RGMII
#define CONFIG_FEC_MXC_PHYADDR   0
#define CONFIG_ARP_TIMEOUT       200UL

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
#define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS      0
#define CONFIG_USBD_HS
#define CONFIG_NETCONSOLE

/* Framebuffer and LCD */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */

/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
#define CONFIG_PREBOOT

/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/*
 * MTD Command for mtdparts
 */
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

/* Persistent Environment Config */
#if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_SYS_MMC_ENV_DEV         0
  #define CONFIG_SYS_MMC_ENV_PART        1
  #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
  #define CONFIG_ENV_SIZE                (128 * SZ_1K)
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
#elif defined(CONFIG_ENV_IS_IN_NAND)
  #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
  #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
  #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
  #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET		(512 * SZ_1K)
  #define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
  #define CONFIG_ENV_SIZE		(8 * SZ_1K)
  #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
  #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
  #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
  #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
#endif

/* Environment */
#define CONFIG_IPADDR             192.168.1.1
#define CONFIG_SERVERIP           192.168.1.146

#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"pcidisable=1\0" \
	"splashpos=m,m\0" \
	"usb_pgood_delay=2000\0" \
	"console=ttymxc1\0" \
	"bootdevs=usb mmc sata flash\0" \
	"hwconfig=_UNKNOWN_\0" \
	"video=\0" \
	\
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
	"disk=0\0" \
	"part=1\0" \
	\
	"fdt_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"initrd_high=0xffffffff\0" \
	"fixfdt=" \
		"fdt addr ${fdt_addr}\0" \
	"bootdir=boot\0" \
	"loadfdt=" \
		"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
			"run fixfdt; " \
		"fi\0" \
	\
	"fs=ext4\0" \
	"script=6x_bootscript-ventana\0" \
	"loadscript=" \
		"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
			"source ${loadaddr}; " \
		"fi\0" \
	\
	"uimage=uImage\0" \
	"mmc_root=mmcblk0p1\0" \
	"mmc_boot=" \
		"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
		"mmc dev ${disk} && mmc rescan && " \
		"setenv dtype mmc; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/${mmc_root} rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	\
	"sata_boot=" \
		"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
		"sata init && " \
		"setenv dtype sata; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	"usb_boot=" \
		"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
		"usb start && usb dev ${disk} && " \
		"setenv dtype usb; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0"

#ifdef CONFIG_SPI_FLASH
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	"image_uboot=ventana/u-boot_spi.imx\0" \
	\
	"spi_koffset=0x90000\0" \
	"spi_klen=0x200000\0" \
	\
	"spi_updateuboot=echo Updating uboot from " \
		"${serverip}:${image_uboot}...; " \
		"tftpboot ${loadaddr} ${image_uboot} && " \
		"sf probe && sf erase 0 80000 && " \
			"sf write ${loadaddr} 400 ${filesize}\0" \
	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
		"to ${spi_koffset} ...; " \
		"tftp ${loadaddr} ${image_os} && " \
		"sf probe && " \
		"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	\
	"flash_boot=" \
		"if sf probe && " \
		"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mtdblock3 " \
				"rootfstype=squashfs,jffs2 " \
				"${video} ${extra}; " \
			"bootm; " \
		"fi\0"
#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	\
	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
		"tftp ${loadaddr} ${image_rootfs} && " \
		"nand erase.part rootfs && " \
		"nand write ${loadaddr} rootfs ${filesize}\0" \
	\
	"flash_boot=" \
		"setenv fsload 'ubifsload'; " \
		"ubi part rootfs; " \
		"if ubi check boot; then " \
			"ubifsmount ubi0:boot; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=squashfs,ubifs; " \
			"setenv bootdir; " \
		"elif ubi check rootfs; then " \
			"ubifsmount ubi0:rootfs; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=ubifs; " \
		"fi; " \
		"setenv dtype nand; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=${root} ${video} ${extra}; " \
			"if run loadfdt; then " \
				"ubifsumount; " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"ubifsumount; bootm; " \
			"fi; " \
		"fi\0"
#endif

#define CONFIG_BOOTCOMMAND \
	"for btype in ${bootdevs}; do " \
		"echo; echo Attempting ${btype} boot...; " \
		"if run ${btype}_boot; then; fi; " \
	"done"

#endif			       /* __CONFIG_H */
Commit	Line	Data
59189a8b TH	1	/*
	2	* Copyright (C) 2013 Gateworks Corporation
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
0cc11dea	10	/* SPL */
0cc11dea	11	/* Location in NAND to read U-Boot from */
55ff55e9	12	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
0cc11dea	13
53940a50	14	/* Falcon Mode */
53940a50	15	#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
53940a50 TH	16
53940a50 TH	17	/* Falcon Mode - NAND support: args@17MB kernel@18MB */
53940a50 TH	18	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
	19
	20	/* Falcon Mode - MMC support: args@1MB kernel@2MB */
	21	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
	22	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
	23	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
	24
0cc11dea	25	#include "imx6_spl.h" /* common IMX6 SPL configuration */
59189a8b	26	#include "mx6_common.h"
6eab98a0	27	#define CONFIG_DISPLAY_BOARDINFO_LATE
59189a8b TH	28
	29	#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
	30
ea690917	31	/* Serial ATAG */
59189a8b	32	#define CONFIG_SERIAL_TAG
59189a8b TH	33
59189a8b TH	34	/* Size of malloc() pool */
55ff55e9	35	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
59189a8b TH	36
59189a8b TH	37	/* Init Functions */
59189a8b TH	38	#define CONFIG_MISC_INIT_R
59189a8b TH	39
e1b4770c TH	40	/* Driver Model */
e1b4770c TH	41	#ifndef CONFIG_SPL_BUILD
e1b4770c	42	#define CONFIG_DM_GPIO
50de5088	43	#define CONFIG_DM_THERMAL
e1b4770c TH	44	#endif
e1b4770c TH	45
50de5088	46	/* Thermal */
1368f993	47	#define CONFIG_IMX_THERMAL
50de5088	48
59189a8b TH	49	/* Serial */
	50	#define CONFIG_MXC_UART
	51	#define CONFIG_MXC_UART_BASE UART2_BASE
	52
	53	#ifdef CONFIG_SPI_FLASH
	54
	55	/* SPI */
59189a8b	56	#ifdef CONFIG_CMD_SF
59189a8b TH	57	#define CONFIG_SPI_FLASH_MTD
59189a8b TH	58	#define CONFIG_SPI_FLASH_BAR
59189a8b	59	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	60	#define CONFIG_SF_DEFAULT_CS 0
59189a8b TH	61	/* GPIO 3-19 (21248) */
	62	#define CONFIG_SF_DEFAULT_SPEED 30000000
	63	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	64	#endif
	65
d883fcc6	66	#elif defined(CONFIG_SPL_NAND_SUPPORT)
59189a8b	67	/* Enable NAND support */
59189a8b	68	#ifdef CONFIG_CMD_NAND
59189a8b TH	69	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	70	#define CONFIG_SYS_NAND_BASE 0x40000000
	71	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	72	#define CONFIG_SYS_NAND_ONFI_DETECTION
	73
	74	/* DMA stuff, needed for GPMI/MXS NAND support */
59189a8b TH	75	#endif
	76
	77	#endif /* CONFIG_SPI_FLASH */
	78
59189a8b	79	/* I2C Configs */
59189a8b TH	80	#define CONFIG_SYS_I2C
59189a8b TH	81	#define CONFIG_SYS_I2C_MXC
03544c66 AA	82	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	83	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	84	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
9c0fe83e TH	85	#define CONFIG_SYS_I2C_SPEED 100000
9c0fe83e TH	86	#define CONFIG_I2C_GSC 0
f6747cda	87	#define CONFIG_I2C_EDID
59189a8b TH	88
59189a8b TH	89	/* MMC Configs */
59189a8b	90	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
59189a8b	91
1faca6ad TH	92	/* eMMC Configs */
	93	#define CONFIG_SUPPORT_EMMC_BOOT
	94	#define CONFIG_SUPPORT_EMMC_RPMB
	95
59189a8b TH	96	/*
	97	* SATA Configs
	98	*/
59189a8b	99	#ifdef CONFIG_CMD_SATA
59189a8b TH	100	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	101	#define CONFIG_DWC_AHSATA_PORT_ID 0
	102	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	103	#define CONFIG_LBA48
59189a8b TH	104	#endif
	105
	106	/*
	107	* PCI express
	108	*/
59189a8b	109	#ifdef CONFIG_CMD_PCI
59189a8b	110	#define CONFIG_PCI_SCAN_SHOW
dad08286	111	#define CONFIG_PCI_FIXUP_DEV
59189a8b TH	112	#define CONFIG_PCIE_IMX
	113	#endif
	114
	115	/*
	116	* PMIC
	117	*/
	118	#define CONFIG_POWER
	119	#define CONFIG_POWER_I2C
	120	#define CONFIG_POWER_PFUZE100
	121	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
234d89da TH	122	#define CONFIG_POWER_LTC3676
234d89da TH	123	#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
59189a8b TH	124
59189a8b TH	125	/* Various command support */
f7d9fcd1	126	#define CONFIG_CMD_UNZIP /* gzwrite */
59189a8b TH	127
	128	/* Ethernet support */
	129	#define CONFIG_FEC_MXC
	130	#define CONFIG_MII
	131	#define IMX_FEC_BASE ENET_BASE_ADDR
	132	#define CONFIG_FEC_XCV_TYPE RGMII
59189a8b	133	#define CONFIG_FEC_MXC_PHYADDR 0
59189a8b TH	134	#define CONFIG_ARP_TIMEOUT 200UL
	135
	136	/* USB Configs */
59189a8b TH	137	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	138	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	139	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	140	#define CONFIG_MXC_USB_FLAGS 0
59189a8b	141	#define CONFIG_USBD_HS
59189a8b	142	#define CONFIG_NETCONSOLE
59189a8b	143
7a278f9f	144	/* Framebuffer and LCD */
7a278f9f	145	#define CONFIG_VIDEO_IPUV3
7a278f9f	146	#define CONFIG_VIDEO_LOGO
7a278f9f TH	147	#define CONFIG_IMX_HDMI
7a278f9f TH	148	#define CONFIG_IMX_VIDEO_SKIP
0a22c7f0 TH	149	#define CONFIG_VIDEO_BMP_LOGO
	150	#define CONFIG_SPLASH_SCREEN_ALIGN
	151	#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
7a278f9f	152
59189a8b	153	/* Miscellaneous configurable options */
59189a8b	154	#define CONFIG_HWCONFIG
899f589b	155	#define CONFIG_PREBOOT
59189a8b	156
59189a8b TH	157	/* Memory configuration */
	158	#define CONFIG_SYS_MEMTEST_START 0x10000000
	159	#define CONFIG_SYS_MEMTEST_END 0x10010000
	160	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
59189a8b TH	161
	162	/* Physical Memory Map */
	163	#define CONFIG_NR_DRAM_BANKS 1
	164	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	165	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	166	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	167	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	168
	169	#define CONFIG_SYS_INIT_SP_OFFSET \
	170	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	171	#define CONFIG_SYS_INIT_SP_ADDR \
	172	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	173
59189a8b TH	174	/*
	175	* MTD Command for mtdparts
	176	*/
59189a8b TH	177	#define CONFIG_MTD_DEVICE
59189a8b TH	178	#define CONFIG_MTD_PARTITIONS
59189a8b TH	179
59189a8b TH	180	/* Persistent Environment Config */
59189a8b	181	#if defined(CONFIG_ENV_IS_IN_MMC)
59189a8b	182	#define CONFIG_SYS_MMC_ENV_DEV 0
b69999ef	183	#define CONFIG_SYS_MMC_ENV_PART 1
0a9c2150 TH	184	#define CONFIG_ENV_OFFSET (709 * SZ_1K)
	185	#define CONFIG_ENV_SIZE (128 * SZ_1K)
	186	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
59189a8b	187	#elif defined(CONFIG_ENV_IS_IN_NAND)
55ff55e9 TH	188	#define CONFIG_ENV_OFFSET (16 * SZ_1M)
55ff55e9 TH	189	#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
59189a8b	190	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
55ff55e9	191	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
59189a8b TH	192	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
59189a8b TH	193	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
55ff55e9 TH	194	#define CONFIG_ENV_OFFSET (512 * SZ_1K)
	195	#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
	196	#define CONFIG_ENV_SIZE (8 * SZ_1K)
59189a8b TH	197	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	198	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	199	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	200	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	201	#endif
	202
	203	/* Environment */
59189a8b TH	204	#define CONFIG_IPADDR 192.168.1.1
59189a8b TH	205	#define CONFIG_SERVERIP 192.168.1.146
59189a8b TH	206
59189a8b TH	207	#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
f4416579	208	"pcidisable=1\0" \
0a22c7f0	209	"splashpos=m,m\0" \
04171690	210	"usb_pgood_delay=2000\0" \
59189a8b TH	211	"console=ttymxc1\0" \
59189a8b TH	212	"bootdevs=usb mmc sata flash\0" \
5911c092	213	"hwconfig=_UNKNOWN_\0" \
59189a8b TH	214	"video=\0" \
59189a8b TH	215	\
43ede0bc TR	216	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
43ede0bc TR	217	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
7698cdfd TH	218	"disk=0\0" \
7698cdfd TH	219	"part=1\0" \
59189a8b TH	220	\
	221	"fdt_high=0xffffffff\0" \
	222	"fdt_addr=0x18000000\0" \
8cc25eb8	223	"initrd_high=0xffffffff\0" \
4df0bff3 TH	224	"fixfdt=" \
4df0bff3 TH	225	"fdt addr ${fdt_addr}\0" \
e2801a96	226	"bootdir=boot\0" \
59189a8b	227	"loadfdt=" \
1b740001 TH	228	"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
1b740001 TH	229	"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
4df0bff3	230	"run fixfdt; " \
1b740001 TH	231	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
1b740001 TH	232	"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
4df0bff3	233	"run fixfdt; " \
1b740001 TH	234	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
1b740001 TH	235	"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
4df0bff3	236	"run fixfdt; " \
59189a8b TH	237	"fi\0" \
59189a8b TH	238	\
543a4aba	239	"fs=ext4\0" \
e2801a96	240	"script=6x_bootscript-ventana\0" \
59189a8b	241	"loadscript=" \
e2801a96	242	"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
50987095	243	"source ${loadaddr}; " \
59189a8b TH	244	"fi\0" \
59189a8b TH	245	\
e2801a96	246	"uimage=uImage\0" \
79942c4f	247	"mmc_root=mmcblk0p1\0" \
59189a8b	248	"mmc_boot=" \
543a4aba	249	"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
7698cdfd	250	"mmc dev ${disk} && mmc rescan && " \
560e8b3f	251	"setenv dtype mmc; run loadscript; " \
e2801a96	252	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	253	"setenv bootargs console=${console},${baudrate} " \
79942c4f	254	"root=/dev/${mmc_root} rootfstype=${fs} " \
59189a8b	255	"rootwait rw ${video} ${extra}; " \
4df0bff3	256	"if run loadfdt; then " \
59189a8b TH	257	"bootm ${loadaddr} - ${fdt_addr}; " \
	258	"else " \
	259	"bootm; " \
	260	"fi; " \
	261	"fi\0" \
	262	\
	263	"sata_boot=" \
543a4aba	264	"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
7698cdfd	265	"sata init && " \
560e8b3f	266	"setenv dtype sata; run loadscript; " \
e2801a96	267	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	268	"setenv bootargs console=${console},${baudrate} " \
543a4aba	269	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	270	"rootwait rw ${video} ${extra}; " \
4df0bff3	271	"if run loadfdt; then " \
59189a8b TH	272	"bootm ${loadaddr} - ${fdt_addr}; " \
	273	"else " \
	274	"bootm; " \
	275	"fi; " \
	276	"fi\0" \
	277	"usb_boot=" \
543a4aba	278	"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
7698cdfd	279	"usb start && usb dev ${disk} && " \
560e8b3f	280	"setenv dtype usb; run loadscript; " \
e2801a96	281	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	282	"setenv bootargs console=${console},${baudrate} " \
543a4aba	283	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	284	"rootwait rw ${video} ${extra}; " \
4df0bff3	285	"if run loadfdt; then " \
59189a8b TH	286	"bootm ${loadaddr} - ${fdt_addr}; " \
	287	"else " \
	288	"bootm; " \
	289	"fi; " \
	290	"fi\0"
	291
	292	#ifdef CONFIG_SPI_FLASH
	293	#define CONFIG_EXTRA_ENV_SETTINGS \
	294	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	295	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	296	"image_uboot=ventana/u-boot_spi.imx\0" \
	297	\
	298	"spi_koffset=0x90000\0" \
	299	"spi_klen=0x200000\0" \
	300	\
	301	"spi_updateuboot=echo Updating uboot from " \
	302	"${serverip}:${image_uboot}...; " \
	303	"tftpboot ${loadaddr} ${image_uboot} && " \
	304	"sf probe && sf erase 0 80000 && " \
	305	"sf write ${loadaddr} 400 ${filesize}\0" \
	306	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
	307	"to ${spi_koffset} ...; " \
	308	"tftp ${loadaddr} ${image_os} && " \
	309	"sf probe && " \
	310	"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	311	\
	312	"flash_boot=" \
	313	"if sf probe && " \
	314	"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
	315	"setenv bootargs console=${console},${baudrate} " \
	316	"root=/dev/mtdblock3 " \
	317	"rootfstype=squashfs,jffs2 " \
	318	"${video} ${extra}; " \
	319	"bootm; " \
	320	"fi\0"
	321	#else
	322	#define CONFIG_EXTRA_ENV_SETTINGS \
	323	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
59189a8b	324	\
e2801a96	325	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
59189a8b TH	326	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
	327	"tftp ${loadaddr} ${image_rootfs} && " \
	328	"nand erase.part rootfs && " \
	329	"nand write ${loadaddr} rootfs ${filesize}\0" \
	330	\
	331	"flash_boot=" \
	332	"setenv fsload 'ubifsload'; " \
e2801a96 TH	333	"ubi part rootfs; " \
	334	"if ubi check boot; then " \
	335	"ubifsmount ubi0:boot; " \
	336	"setenv root ubi0:rootfs ubi.mtd=2 " \
	337	"rootfstype=squashfs,ubifs; " \
	338	"setenv bootdir; " \
	339	"elif ubi check rootfs; then " \
	340	"ubifsmount ubi0:rootfs; " \
	341	"setenv root ubi0:rootfs ubi.mtd=2 " \
	342	"rootfstype=ubifs; " \
	343	"fi; " \
560e8b3f	344	"setenv dtype nand; run loadscript; " \
e2801a96	345	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	346	"setenv bootargs console=${console},${baudrate} " \
e2801a96	347	"root=${root} ${video} ${extra}; " \
4df0bff3	348	"if run loadfdt; then " \
59189a8b TH	349	"ubifsumount; " \
	350	"bootm ${loadaddr} - ${fdt_addr}; " \
	351	"else " \
	352	"ubifsumount; bootm; " \
	353	"fi; " \
	354	"fi\0"
	355	#endif
	356
	357	#define CONFIG_BOOTCOMMAND \
	358	"for btype in ${bootdevs}; do " \
	359	"echo; echo Attempting ${btype} boot...; " \
	360	"if run ${btype}_boot; then; fi; " \
	361	"done"
	362
59189a8b	363	#endif /* __CONFIG_H */