[people/ms/u-boot.git] / include / configs / gw_ventana.h

/*
 * Copyright (C) 2013 Gateworks Corporation
 *
 * SPDX-License-Identifier: GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SPL */
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)

/* Falcon Mode */
#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000

/* Falcon Mode - NAND support: args@17MB kernel@18MB */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	(18 * SZ_1M)

/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x800	/* 1MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	(CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x1000	/* 2MB */

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"
#define CONFIG_DISPLAY_BOARDINFO_LATE

#define CONFIG_MACH_TYPE	4520   /* Gateworks Ventana Platform */

/* Serial ATAG */
#define CONFIG_SERIAL_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

/* Init Functions */
#define CONFIG_MISC_INIT_R

/* Driver Model */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_DM_GPIO
#define CONFIG_DM_THERMAL
#endif

/* Thermal */
#define CONFIG_IMX_THERMAL

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#ifdef CONFIG_SPI_FLASH

/* SPI */
#ifdef CONFIG_CMD_SF
  #define CONFIG_MXC_SPI
  #define CONFIG_SPI_FLASH_MTD
  #define CONFIG_SPI_FLASH_BAR
  #define CONFIG_SF_DEFAULT_BUS              0
  #define CONFIG_SF_DEFAULT_CS               0
					     /* GPIO 3-19 (21248) */
  #define CONFIG_SF_DEFAULT_SPEED            30000000
  #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
#endif

#elif defined(CONFIG_SPL_NAND_SUPPORT)
/* Enable NAND support */
#ifdef CONFIG_CMD_NAND
  #define CONFIG_NAND_MXS
  #define CONFIG_SYS_MAX_NAND_DEVICE	1
  #define CONFIG_SYS_NAND_BASE		0x40000000
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_ONFI_DETECTION

  /* DMA stuff, needed for GPMI/MXS NAND support */
  #define CONFIG_APBH_DMA
  #define CONFIG_APBH_DMA_BURST
  #define CONFIG_APBH_DMA_BURST8
#endif

#endif /* CONFIG_SPI_FLASH */

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_GSC			0
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* eMMC Configs */
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SUPPORT_EMMC_RPMB

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48
#endif

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#endif

/*
 * PMIC
 */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
#define CONFIG_POWER_LTC3676
#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c

/* Various command support */
#define CONFIG_CMD_UNZIP         /* gzwrite */

/* Ethernet support */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE             ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE      RGMII
#define CONFIG_FEC_MXC_PHYADDR   0
#define CONFIG_ARP_TIMEOUT       200UL

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
#define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS      0
#define CONFIG_USBD_HS
#define CONFIG_NETCONSOLE

/* USB Mass Storage Gadget */
#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* Framebuffer and LCD */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */

/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
#define CONFIG_PREBOOT

/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/*
 * MTD Command for mtdparts
 */
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

/* Persistent Environment Config */
#if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_SYS_MMC_ENV_DEV         0
  #define CONFIG_SYS_MMC_ENV_PART        1
  #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
  #define CONFIG_ENV_SIZE                (128 * SZ_1K)
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
#elif defined(CONFIG_ENV_IS_IN_NAND)
  #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
  #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
  #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
  #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET		(512 * SZ_1K)
  #define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
  #define CONFIG_ENV_SIZE		(8 * SZ_1K)
  #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
  #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
  #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
  #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
#endif

/* Environment */
#define CONFIG_IPADDR             192.168.1.1
#define CONFIG_SERVERIP           192.168.1.146

#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"pcidisable=1\0" \
	"splashpos=m,m\0" \
	"usb_pgood_delay=2000\0" \
	"console=ttymxc1\0" \
	"bootdevs=usb mmc sata flash\0" \
	"hwconfig=_UNKNOWN_\0" \
	"video=\0" \
	\
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
	"disk=0\0" \
	"part=1\0" \
	\
	"fdt_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"initrd_high=0xffffffff\0" \
	"fixfdt=" \
		"fdt addr ${fdt_addr}\0" \
	"bootdir=boot\0" \
	"loadfdt=" \
		"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
			"run fixfdt; " \
		"fi\0" \
	\
	"fs=ext4\0" \
	"script=6x_bootscript-ventana\0" \
	"loadscript=" \
		"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
			"source ${loadaddr}; " \
		"fi\0" \
	\
	"uimage=uImage\0" \
	"mmc_root=mmcblk0p1\0" \
	"mmc_boot=" \
		"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
		"mmc dev ${disk} && mmc rescan && " \
		"setenv dtype mmc; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/${mmc_root} rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	\
	"sata_boot=" \
		"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
		"sata init && " \
		"setenv dtype sata; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	"usb_boot=" \
		"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
		"usb start && usb dev ${disk} && " \
		"setenv dtype usb; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0"

#ifdef CONFIG_SPI_FLASH
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	"image_uboot=ventana/u-boot_spi.imx\0" \
	\
	"spi_koffset=0x90000\0" \
	"spi_klen=0x200000\0" \
	\
	"spi_updateuboot=echo Updating uboot from " \
		"${serverip}:${image_uboot}...; " \
		"tftpboot ${loadaddr} ${image_uboot} && " \
		"sf probe && sf erase 0 80000 && " \
			"sf write ${loadaddr} 400 ${filesize}\0" \
	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
		"to ${spi_koffset} ...; " \
		"tftp ${loadaddr} ${image_os} && " \
		"sf probe && " \
		"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	\
	"flash_boot=" \
		"if sf probe && " \
		"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mtdblock3 " \
				"rootfstype=squashfs,jffs2 " \
				"${video} ${extra}; " \
			"bootm; " \
		"fi\0"
#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	\
	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
		"tftp ${loadaddr} ${image_rootfs} && " \
		"nand erase.part rootfs && " \
		"nand write ${loadaddr} rootfs ${filesize}\0" \
	\
	"flash_boot=" \
		"setenv fsload 'ubifsload'; " \
		"ubi part rootfs; " \
		"if ubi check boot; then " \
			"ubifsmount ubi0:boot; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=squashfs,ubifs; " \
			"setenv bootdir; " \
		"elif ubi check rootfs; then " \
			"ubifsmount ubi0:rootfs; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=ubifs; " \
		"fi; " \
		"setenv dtype nand; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=${root} ${video} ${extra}; " \
			"if run loadfdt; then " \
				"ubifsumount; " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"ubifsumount; bootm; " \
			"fi; " \
		"fi\0"
#endif

#define CONFIG_BOOTCOMMAND \
	"for btype in ${bootdevs}; do " \
		"echo; echo Attempting ${btype} boot...; " \
		"if run ${btype}_boot; then; fi; " \
	"done"

#endif			       /* __CONFIG_H */
Commit	Line	Data
59189a8b TH	1	/*
	2	* Copyright (C) 2013 Gateworks Corporation
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
0cc11dea	10	/* SPL */
0cc11dea	11	/* Location in NAND to read U-Boot from */
55ff55e9	12	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
0cc11dea	13
53940a50	14	/* Falcon Mode */
53940a50	15	#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
53940a50 TH	16
53940a50 TH	17	/* Falcon Mode - NAND support: args@17MB kernel@18MB */
53940a50 TH	18	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
	19
	20	/* Falcon Mode - MMC support: args@1MB kernel@2MB */
	21	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
	22	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
	23	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
	24
0cc11dea	25	#include "imx6_spl.h" /* common IMX6 SPL configuration */
59189a8b	26	#include "mx6_common.h"
6eab98a0	27	#define CONFIG_DISPLAY_BOARDINFO_LATE
59189a8b TH	28
	29	#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
	30
ea690917	31	/* Serial ATAG */
59189a8b	32	#define CONFIG_SERIAL_TAG
59189a8b TH	33
59189a8b TH	34	/* Size of malloc() pool */
55ff55e9	35	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
59189a8b TH	36
59189a8b TH	37	/* Init Functions */
59189a8b TH	38	#define CONFIG_MISC_INIT_R
59189a8b TH	39
e1b4770c TH	40	/* Driver Model */
e1b4770c TH	41	#ifndef CONFIG_SPL_BUILD
e1b4770c	42	#define CONFIG_DM_GPIO
50de5088	43	#define CONFIG_DM_THERMAL
e1b4770c TH	44	#endif
e1b4770c TH	45
50de5088	46	/* Thermal */
1368f993	47	#define CONFIG_IMX_THERMAL
50de5088	48
59189a8b TH	49	/* Serial */
	50	#define CONFIG_MXC_UART
	51	#define CONFIG_MXC_UART_BASE UART2_BASE
	52
	53	#ifdef CONFIG_SPI_FLASH
	54
	55	/* SPI */
59189a8b TH	56	#ifdef CONFIG_CMD_SF
	57	#define CONFIG_MXC_SPI
	58	#define CONFIG_SPI_FLASH_MTD
	59	#define CONFIG_SPI_FLASH_BAR
59189a8b	60	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	61	#define CONFIG_SF_DEFAULT_CS 0
59189a8b TH	62	/* GPIO 3-19 (21248) */
	63	#define CONFIG_SF_DEFAULT_SPEED 30000000
	64	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	65	#endif
	66
d883fcc6	67	#elif defined(CONFIG_SPL_NAND_SUPPORT)
59189a8b	68	/* Enable NAND support */
59189a8b TH	69	#ifdef CONFIG_CMD_NAND
	70	#define CONFIG_NAND_MXS
	71	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	72	#define CONFIG_SYS_NAND_BASE 0x40000000
	73	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	74	#define CONFIG_SYS_NAND_ONFI_DETECTION
	75
	76	/* DMA stuff, needed for GPMI/MXS NAND support */
	77	#define CONFIG_APBH_DMA
	78	#define CONFIG_APBH_DMA_BURST
	79	#define CONFIG_APBH_DMA_BURST8
	80	#endif
	81
	82	#endif /* CONFIG_SPI_FLASH */
	83
59189a8b	84	/* I2C Configs */
59189a8b TH	85	#define CONFIG_SYS_I2C
59189a8b TH	86	#define CONFIG_SYS_I2C_MXC
03544c66 AA	87	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	88	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	89	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
9c0fe83e TH	90	#define CONFIG_SYS_I2C_SPEED 100000
9c0fe83e TH	91	#define CONFIG_I2C_GSC 0
f6747cda	92	#define CONFIG_I2C_EDID
59189a8b TH	93
59189a8b TH	94	/* MMC Configs */
59189a8b	95	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
59189a8b	96
1faca6ad TH	97	/* eMMC Configs */
	98	#define CONFIG_SUPPORT_EMMC_BOOT
	99	#define CONFIG_SUPPORT_EMMC_RPMB
	100
59189a8b TH	101	/*
	102	* SATA Configs
	103	*/
59189a8b	104	#ifdef CONFIG_CMD_SATA
59189a8b TH	105	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	106	#define CONFIG_DWC_AHSATA_PORT_ID 0
	107	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	108	#define CONFIG_LBA48
59189a8b TH	109	#endif
	110
	111	/*
	112	* PCI express
	113	*/
59189a8b	114	#ifdef CONFIG_CMD_PCI
59189a8b	115	#define CONFIG_PCI_SCAN_SHOW
dad08286	116	#define CONFIG_PCI_FIXUP_DEV
59189a8b TH	117	#define CONFIG_PCIE_IMX
	118	#endif
	119
	120	/*
	121	* PMIC
	122	*/
	123	#define CONFIG_POWER
	124	#define CONFIG_POWER_I2C
	125	#define CONFIG_POWER_PFUZE100
	126	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
234d89da TH	127	#define CONFIG_POWER_LTC3676
234d89da TH	128	#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
59189a8b TH	129
59189a8b TH	130	/* Various command support */
f7d9fcd1	131	#define CONFIG_CMD_UNZIP /* gzwrite */
59189a8b TH	132
	133	/* Ethernet support */
	134	#define CONFIG_FEC_MXC
	135	#define CONFIG_MII
	136	#define IMX_FEC_BASE ENET_BASE_ADDR
	137	#define CONFIG_FEC_XCV_TYPE RGMII
59189a8b	138	#define CONFIG_FEC_MXC_PHYADDR 0
59189a8b TH	139	#define CONFIG_ARP_TIMEOUT 200UL
	140
	141	/* USB Configs */
59189a8b TH	142	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	143	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	144	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	145	#define CONFIG_MXC_USB_FLAGS 0
59189a8b	146	#define CONFIG_USBD_HS
59189a8b	147	#define CONFIG_NETCONSOLE
59189a8b	148
9543e954	149	/* USB Mass Storage Gadget */
01acd6ab	150	#define CONFIG_USB_FUNCTION_MASS_STORAGE
9543e954	151
7a278f9f	152	/* Framebuffer and LCD */
7a278f9f	153	#define CONFIG_VIDEO_IPUV3
7a278f9f	154	#define CONFIG_VIDEO_LOGO
7a278f9f TH	155	#define CONFIG_IMX_HDMI
7a278f9f TH	156	#define CONFIG_IMX_VIDEO_SKIP
0a22c7f0 TH	157	#define CONFIG_VIDEO_BMP_LOGO
	158	#define CONFIG_SPLASH_SCREEN_ALIGN
	159	#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
7a278f9f	160
59189a8b	161	/* Miscellaneous configurable options */
59189a8b	162	#define CONFIG_HWCONFIG
899f589b	163	#define CONFIG_PREBOOT
59189a8b	164
59189a8b TH	165	/* Memory configuration */
	166	#define CONFIG_SYS_MEMTEST_START 0x10000000
	167	#define CONFIG_SYS_MEMTEST_END 0x10010000
	168	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
59189a8b TH	169
	170	/* Physical Memory Map */
	171	#define CONFIG_NR_DRAM_BANKS 1
	172	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	173	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	174	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	175	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	176
	177	#define CONFIG_SYS_INIT_SP_OFFSET \
	178	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	179	#define CONFIG_SYS_INIT_SP_ADDR \
	180	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	181
59189a8b TH	182	/*
	183	* MTD Command for mtdparts
	184	*/
59189a8b TH	185	#define CONFIG_MTD_DEVICE
59189a8b TH	186	#define CONFIG_MTD_PARTITIONS
59189a8b TH	187
59189a8b TH	188	/* Persistent Environment Config */
59189a8b	189	#if defined(CONFIG_ENV_IS_IN_MMC)
59189a8b	190	#define CONFIG_SYS_MMC_ENV_DEV 0
b69999ef	191	#define CONFIG_SYS_MMC_ENV_PART 1
0a9c2150 TH	192	#define CONFIG_ENV_OFFSET (709 * SZ_1K)
	193	#define CONFIG_ENV_SIZE (128 * SZ_1K)
	194	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
59189a8b	195	#elif defined(CONFIG_ENV_IS_IN_NAND)
55ff55e9 TH	196	#define CONFIG_ENV_OFFSET (16 * SZ_1M)
55ff55e9 TH	197	#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
59189a8b	198	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
55ff55e9	199	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
59189a8b TH	200	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
59189a8b TH	201	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
55ff55e9 TH	202	#define CONFIG_ENV_OFFSET (512 * SZ_1K)
	203	#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
	204	#define CONFIG_ENV_SIZE (8 * SZ_1K)
59189a8b TH	205	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	206	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	207	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	208	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	209	#endif
	210
	211	/* Environment */
59189a8b TH	212	#define CONFIG_IPADDR 192.168.1.1
59189a8b TH	213	#define CONFIG_SERVERIP 192.168.1.146
59189a8b TH	214
59189a8b TH	215	#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
f4416579	216	"pcidisable=1\0" \
0a22c7f0	217	"splashpos=m,m\0" \
04171690	218	"usb_pgood_delay=2000\0" \
59189a8b TH	219	"console=ttymxc1\0" \
59189a8b TH	220	"bootdevs=usb mmc sata flash\0" \
5911c092	221	"hwconfig=_UNKNOWN_\0" \
59189a8b TH	222	"video=\0" \
59189a8b TH	223	\
43ede0bc TR	224	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
43ede0bc TR	225	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
7698cdfd TH	226	"disk=0\0" \
7698cdfd TH	227	"part=1\0" \
59189a8b TH	228	\
	229	"fdt_high=0xffffffff\0" \
	230	"fdt_addr=0x18000000\0" \
8cc25eb8	231	"initrd_high=0xffffffff\0" \
4df0bff3 TH	232	"fixfdt=" \
4df0bff3 TH	233	"fdt addr ${fdt_addr}\0" \
e2801a96	234	"bootdir=boot\0" \
59189a8b	235	"loadfdt=" \
1b740001 TH	236	"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
1b740001 TH	237	"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
4df0bff3	238	"run fixfdt; " \
1b740001 TH	239	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
1b740001 TH	240	"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
4df0bff3	241	"run fixfdt; " \
1b740001 TH	242	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
1b740001 TH	243	"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
4df0bff3	244	"run fixfdt; " \
59189a8b TH	245	"fi\0" \
59189a8b TH	246	\
543a4aba	247	"fs=ext4\0" \
e2801a96	248	"script=6x_bootscript-ventana\0" \
59189a8b	249	"loadscript=" \
e2801a96	250	"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
50987095	251	"source ${loadaddr}; " \
59189a8b TH	252	"fi\0" \
59189a8b TH	253	\
e2801a96	254	"uimage=uImage\0" \
79942c4f	255	"mmc_root=mmcblk0p1\0" \
59189a8b	256	"mmc_boot=" \
543a4aba	257	"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
7698cdfd	258	"mmc dev ${disk} && mmc rescan && " \
560e8b3f	259	"setenv dtype mmc; run loadscript; " \
e2801a96	260	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	261	"setenv bootargs console=${console},${baudrate} " \
79942c4f	262	"root=/dev/${mmc_root} rootfstype=${fs} " \
59189a8b	263	"rootwait rw ${video} ${extra}; " \
4df0bff3	264	"if run loadfdt; then " \
59189a8b TH	265	"bootm ${loadaddr} - ${fdt_addr}; " \
	266	"else " \
	267	"bootm; " \
	268	"fi; " \
	269	"fi\0" \
	270	\
	271	"sata_boot=" \
543a4aba	272	"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
7698cdfd	273	"sata init && " \
560e8b3f	274	"setenv dtype sata; run loadscript; " \
e2801a96	275	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	276	"setenv bootargs console=${console},${baudrate} " \
543a4aba	277	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	278	"rootwait rw ${video} ${extra}; " \
4df0bff3	279	"if run loadfdt; then " \
59189a8b TH	280	"bootm ${loadaddr} - ${fdt_addr}; " \
	281	"else " \
	282	"bootm; " \
	283	"fi; " \
	284	"fi\0" \
	285	"usb_boot=" \
543a4aba	286	"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
7698cdfd	287	"usb start && usb dev ${disk} && " \
560e8b3f	288	"setenv dtype usb; run loadscript; " \
e2801a96	289	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	290	"setenv bootargs console=${console},${baudrate} " \
543a4aba	291	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	292	"rootwait rw ${video} ${extra}; " \
4df0bff3	293	"if run loadfdt; then " \
59189a8b TH	294	"bootm ${loadaddr} - ${fdt_addr}; " \
	295	"else " \
	296	"bootm; " \
	297	"fi; " \
	298	"fi\0"
	299
	300	#ifdef CONFIG_SPI_FLASH
	301	#define CONFIG_EXTRA_ENV_SETTINGS \
	302	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	303	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	304	"image_uboot=ventana/u-boot_spi.imx\0" \
	305	\
	306	"spi_koffset=0x90000\0" \
	307	"spi_klen=0x200000\0" \
	308	\
	309	"spi_updateuboot=echo Updating uboot from " \
	310	"${serverip}:${image_uboot}...; " \
	311	"tftpboot ${loadaddr} ${image_uboot} && " \
	312	"sf probe && sf erase 0 80000 && " \
	313	"sf write ${loadaddr} 400 ${filesize}\0" \
	314	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
	315	"to ${spi_koffset} ...; " \
	316	"tftp ${loadaddr} ${image_os} && " \
	317	"sf probe && " \
	318	"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	319	\
	320	"flash_boot=" \
	321	"if sf probe && " \
	322	"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
	323	"setenv bootargs console=${console},${baudrate} " \
	324	"root=/dev/mtdblock3 " \
	325	"rootfstype=squashfs,jffs2 " \
	326	"${video} ${extra}; " \
	327	"bootm; " \
	328	"fi\0"
	329	#else
	330	#define CONFIG_EXTRA_ENV_SETTINGS \
	331	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
59189a8b	332	\
e2801a96	333	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
59189a8b TH	334	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
	335	"tftp ${loadaddr} ${image_rootfs} && " \
	336	"nand erase.part rootfs && " \
	337	"nand write ${loadaddr} rootfs ${filesize}\0" \
	338	\
	339	"flash_boot=" \
	340	"setenv fsload 'ubifsload'; " \
e2801a96 TH	341	"ubi part rootfs; " \
	342	"if ubi check boot; then " \
	343	"ubifsmount ubi0:boot; " \
	344	"setenv root ubi0:rootfs ubi.mtd=2 " \
	345	"rootfstype=squashfs,ubifs; " \
	346	"setenv bootdir; " \
	347	"elif ubi check rootfs; then " \
	348	"ubifsmount ubi0:rootfs; " \
	349	"setenv root ubi0:rootfs ubi.mtd=2 " \
	350	"rootfstype=ubifs; " \
	351	"fi; " \
560e8b3f	352	"setenv dtype nand; run loadscript; " \
e2801a96	353	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	354	"setenv bootargs console=${console},${baudrate} " \
e2801a96	355	"root=${root} ${video} ${extra}; " \
4df0bff3	356	"if run loadfdt; then " \
59189a8b TH	357	"ubifsumount; " \
	358	"bootm ${loadaddr} - ${fdt_addr}; " \
	359	"else " \
	360	"ubifsumount; bootm; " \
	361	"fi; " \
	362	"fi\0"
	363	#endif
	364
	365	#define CONFIG_BOOTCOMMAND \
	366	"for btype in ${bootdevs}; do " \
	367	"echo; echo Attempting ${btype} boot...; " \
	368	"if run ${btype}_boot; then; fi; " \
	369	"done"
	370
59189a8b	371	#endif /* __CONFIG_H */