[people/ms/u-boot.git] / include / configs / socfpga_common.h

/*
 * Copyright (C) 2012 Altera Corporation <www.altera.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__


/* Virtual target or real hardware */
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET

#define CONFIG_SYS_THUMB_BUILD

/*
 * High level configuration
 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CLOCKS

#define CONFIG_CRC32_VERIFY

#define CONFIG_FIT
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_BOOTMAPSZ		(64 * 1024 * 1024)

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

/*
 * Memory configurations
 */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM_1			0x0
#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE

#define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
#define CONFIG_SYS_INIT_SP_OFFSET		\
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR			\
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TEXT_BASE		0x08000040
#else
#define CONFIG_SYS_TEXT_BASE		0x01000040
#endif

/*
 * U-Boot general configurations
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
#define CONFIG_SYS_PBSIZE	\
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
						/* Print buffer size */
#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
						/* Boot argument buffer size */
#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
#define CONFIG_CMDLINE_EDITING			/* Command history etc */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Cache
 */
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS

/*
 * SDRAM controller
 */
#define CONFIG_ALTERA_SDRAM

/*
 * EPCS/EPCQx1 Serial Flash Controller
 */
#ifdef CONFIG_ALTERA_SPI
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED		30000000
#define CONFIG_SPI_FLASH_BAR
/*
 * The base address is configurable in QSys, each board must specify the
 * base address based on it's particular FPGA configuration. Please note
 * that the address here is incremented by  0x400  from the Base address
 * selected in QSys, since the SPI registers are at offset +0x400.
 * #define CONFIG_SYS_SPI_BASE		0xff240400
 */
#endif

/*
 * Ethernet on SoC (EMAC)
 */
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_AUTONEG_TIMEOUT		(15 * CONFIG_SYS_HZ)
#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
#endif

/*
 * FPGA Driver
 */
#ifdef CONFIG_CMD_FPGA
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_SOCFPGA
#define CONFIG_FPGA_COUNT		1
#endif

/*
 * L4 OSC1 Timer 0
 */
/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
#define CONFIG_SYS_TIMERBASE		SOCFPGA_OSC1TIMER0_ADDRESS
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TIMER_RATE		2400000
#else
#define CONFIG_SYS_TIMER_RATE		25000000
#endif

/*
 * L4 Watchdog
 */
#ifdef CONFIG_HW_WATCHDOG
#define CONFIG_DESIGNWARE_WATCHDOG
#define CONFIG_DW_WDT_BASE		SOCFPGA_L4WD0_ADDRESS
#define CONFIG_DW_WDT_CLOCK_KHZ		25000
#define CONFIG_HW_WATCHDOG_TIMEOUT_MS	30000
#endif

/*
 * MMC Driver
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_GENERIC_MMC
#define CONFIG_DWMMC
#define CONFIG_SOCFPGA_DWMMC
#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH	1024
/* FIXME */
/* using smaller max blk cnt to avoid flooding the limited stack we have */
#define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
#endif

/*
 * I2C support
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_DW
#define CONFIG_SYS_I2C_BUS_MAX		4
#define CONFIG_SYS_I2C_BASE		SOCFPGA_I2C0_ADDRESS
#define CONFIG_SYS_I2C_BASE1		SOCFPGA_I2C1_ADDRESS
#define CONFIG_SYS_I2C_BASE2		SOCFPGA_I2C2_ADDRESS
#define CONFIG_SYS_I2C_BASE3		SOCFPGA_I2C3_ADDRESS
/* Using standard mode which the speed up to 100Kb/s */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SPEED1		100000
#define CONFIG_SYS_I2C_SPEED2		100000
#define CONFIG_SYS_I2C_SPEED3		100000
/* Address of device when used as slave */
#define CONFIG_SYS_I2C_SLAVE		0x02
#define CONFIG_SYS_I2C_SLAVE1		0x02
#define CONFIG_SYS_I2C_SLAVE2		0x02
#define CONFIG_SYS_I2C_SLAVE3		0x02
#ifndef __ASSEMBLY__
/* Clock supplied to I2C controller in unit of MHz */
unsigned int cm_get_l4_sp_clk_hz(void);
#define IC_CLK				(cm_get_l4_sp_clk_hz() / 1000000)
#endif
#define CONFIG_CMD_I2C

/*
 * QSPI support
 */
/* Enable multiple SPI NOR flash manufacturers */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SPI_FLASH_MTD
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT			"nor0=ff705000.spi"
#endif
/* QSPI reference clock */
#ifndef __ASSEMBLY__
unsigned int cm_get_qspi_controller_clk_hz(void);
#define CONFIG_CQSPI_REF_CLK		cm_get_qspi_controller_clk_hz()
#endif
#define CONFIG_CQSPI_DECODER		0
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_BAR

/*
 * Designware SPI support
 */
#define CONFIG_CMD_SPI

/*
 * Serial Driver
 */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	-4
#define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_NS16550_CLK		1000000
#else
#define CONFIG_SYS_NS16550_CLK		100000000
#endif
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/*
 * USB
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_STORAGE
/*
 * NOTE: User must define either of the following to select which
 *       of the two USB controllers available on SoCFPGA to use.
 *       The DWC2 driver doesn't support multiple USB controllers.
 * #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB0_ADDRESS
 * #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
 */
#endif

/*
 * USB Gadget (DFU, UMS)
 */
#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DWC2_OTG
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW	2

/* USB Composite download gadget - g_dnl */
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_FUNCTION_MASS_STORAGE

#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(32 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT	300

/* USB IDs */
#define CONFIG_G_DNL_VENDOR_NUM		0x0525	/* NetChip */
#define CONFIG_G_DNL_PRODUCT_NUM	0xA4A5	/* Linux-USB File-backed Storage Gadget */
#define CONFIG_G_DNL_UMS_VENDOR_NUM	CONFIG_G_DNL_VENDOR_NUM
#define CONFIG_G_DNL_UMS_PRODUCT_NUM	CONFIG_G_DNL_PRODUCT_NUM
#ifndef CONFIG_G_DNL_MANUFACTURER
#define CONFIG_G_DNL_MANUFACTURER	CONFIG_SYS_VENDOR
#endif
#endif

/*
 * U-Boot environment
 */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_ENV_SIZE			4096

/*
 * SPL
 *
 * SRAM Memory layout:
 *
 * 0xFFFF_0000 ...... Start of SRAM
 * 0xFFFF_xxxx ...... Top of stack (grows down)
 * 0xFFFF_yyyy ...... Malloc area
 * 0xFFFF_zzzz ...... Global Data
 * 0xFFFF_FF00 ...... End of SRAM
 */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_SIMPLE
#endif

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_SPI_SUPPORT

/* SPL SDMMC boot support */
#ifdef CONFIG_SPL_MMC_SUPPORT
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	2
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot-dtb.img"
#define CONFIG_SPL_LIBDISK_SUPPORT
#else
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	3
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xa00 /* offset 2560 sect (1M+256k) */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
#endif
#endif

/* SPL QSPI boot support */
#ifdef CONFIG_SPL_SPI_SUPPORT
#define CONFIG_DM_SEQ_ALIAS		1
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x40000
#endif

/*
 * Stack setup
 */
#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR

#endif	/* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */
Commit	Line	Data
5095ee08 PM	1	/*
	2	* Copyright (C) 2012 Altera Corporation <www.altera.com>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6	#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
	7	#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
	8
5095ee08 PM	9
	10	/* Virtual target or real hardware */
	11	#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
	12
5095ee08 PM	13	#define CONFIG_SYS_THUMB_BUILD
5095ee08 PM	14
5095ee08 PM	15	/*
	16	* High level configuration
	17	*/
	18	#define CONFIG_DISPLAY_CPUINFO
7287d5f0	19	#define CONFIG_DISPLAY_BOARDINFO_LATE
9ec7414e	20	#define CONFIG_ARCH_MISC_INIT
fc520894	21	#define CONFIG_ARCH_EARLY_INIT_R
5095ee08 PM	22	#define CONFIG_SYS_NO_FLASH
	23	#define CONFIG_CLOCKS
	24
251faa20 MV	25	#define CONFIG_CRC32_VERIFY
251faa20 MV	26
5095ee08 PM	27	#define CONFIG_FIT
	28	#define CONFIG_OF_LIBFDT
	29	#define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024)
	30
	31	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	32
	33	/*
	34	* Memory configurations
	35	*/
	36	#define CONFIG_NR_DRAM_BANKS 1
	37	#define PHYS_SDRAM_1 0x0
0223a95c	38	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
5095ee08 PM	39	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
	40	#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
	41
	42	#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
7599b53d MV	43	#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
	44	#define CONFIG_SYS_INIT_SP_OFFSET \
	45	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	46	#define CONFIG_SYS_INIT_SP_ADDR \
	47	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
5095ee08 PM	48
	49	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	50	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	51	#define CONFIG_SYS_TEXT_BASE 0x08000040
	52	#else
	53	#define CONFIG_SYS_TEXT_BASE 0x01000040
	54	#endif
	55
	56	/*
	57	* U-Boot general configurations
	58	*/
	59	#define CONFIG_SYS_LONGHELP
	60	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	61	#define CONFIG_SYS_PBSIZE \
	62	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	63	/* Print buffer size */
	64	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
	65	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	66	/* Boot argument buffer size */
	67	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	68	#define CONFIG_AUTO_COMPLETE /* Command auto complete */
	69	#define CONFIG_CMDLINE_EDITING /* Command history etc */
	70	#define CONFIG_SYS_HUSH_PARSER
	71
	72	/*
	73	* Cache
	74	*/
5095ee08 PM	75	#define CONFIG_SYS_CACHELINE_SIZE 32
	76	#define CONFIG_SYS_L2_PL310
	77	#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
	78
cdd4e6cc DN	79	/*
	80	* SDRAM controller
	81	*/
	82	#define CONFIG_ALTERA_SDRAM
	83
8a78ca9e MV	84	/*
	85	* EPCS/EPCQx1 Serial Flash Controller
	86	*/
	87	#ifdef CONFIG_ALTERA_SPI
	88	#define CONFIG_CMD_SPI
	89	#define CONFIG_CMD_SF
	90	#define CONFIG_SF_DEFAULT_SPEED 30000000
8a78ca9e MV	91	#define CONFIG_SPI_FLASH_BAR
	92	/*
	93	* The base address is configurable in QSys, each board must specify the
	94	* base address based on it's particular FPGA configuration. Please note
	95	* that the address here is incremented by 0x400 from the Base address
	96	* selected in QSys, since the SPI registers are at offset +0x400.
	97	* #define CONFIG_SYS_SPI_BASE 0xff240400
	98	*/
	99	#endif
	100
5095ee08 PM	101	/*
	102	* Ethernet on SoC (EMAC)
	103	*/
	104	#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
5095ee08 PM	105	#define CONFIG_DW_ALTDESCRIPTOR
	106	#define CONFIG_MII
	107	#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
	108	#define CONFIG_PHYLIB
	109	#define CONFIG_PHY_GIGE
	110	#endif
	111
	112	/*
	113	* FPGA Driver
	114	*/
	115	#ifdef CONFIG_CMD_FPGA
	116	#define CONFIG_FPGA
	117	#define CONFIG_FPGA_ALTERA
	118	#define CONFIG_FPGA_SOCFPGA
	119	#define CONFIG_FPGA_COUNT 1
	120	#endif
	121
	122	/*
	123	* L4 OSC1 Timer 0
	124	*/
	125	/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
	126	#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
	127	#define CONFIG_SYS_TIMER_COUNTS_DOWN
	128	#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
	129	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	130	#define CONFIG_SYS_TIMER_RATE 2400000
	131	#else
	132	#define CONFIG_SYS_TIMER_RATE 25000000
	133	#endif
	134
	135	/*
	136	* L4 Watchdog
	137	*/
	138	#ifdef CONFIG_HW_WATCHDOG
	139	#define CONFIG_DESIGNWARE_WATCHDOG
	140	#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
	141	#define CONFIG_DW_WDT_CLOCK_KHZ 25000
d0e932de	142	#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 30000
5095ee08 PM	143	#endif
	144
	145	/*
	146	* MMC Driver
	147	*/
	148	#ifdef CONFIG_CMD_MMC
	149	#define CONFIG_MMC
	150	#define CONFIG_BOUNCE_BUFFER
	151	#define CONFIG_GENERIC_MMC
	152	#define CONFIG_DWMMC
	153	#define CONFIG_SOCFPGA_DWMMC
	154	#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
5095ee08 PM	155	/* FIXME */
	156	/* using smaller max blk cnt to avoid flooding the limited stack we have */
	157	#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
	158	#endif
	159
7fb0f596	160	/*
ebcaf966 SR	161	* I2C support
	162	*/
	163	#define CONFIG_SYS_I2C
	164	#define CONFIG_SYS_I2C_DW
	165	#define CONFIG_SYS_I2C_BUS_MAX 4
	166	#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS
	167	#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS
	168	#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS
	169	#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS
	170	/* Using standard mode which the speed up to 100Kb/s */
	171	#define CONFIG_SYS_I2C_SPEED 100000
	172	#define CONFIG_SYS_I2C_SPEED1 100000
	173	#define CONFIG_SYS_I2C_SPEED2 100000
	174	#define CONFIG_SYS_I2C_SPEED3 100000
	175	/* Address of device when used as slave */
	176	#define CONFIG_SYS_I2C_SLAVE 0x02
	177	#define CONFIG_SYS_I2C_SLAVE1 0x02
	178	#define CONFIG_SYS_I2C_SLAVE2 0x02
	179	#define CONFIG_SYS_I2C_SLAVE3 0x02
	180	#ifndef __ASSEMBLY__
	181	/* Clock supplied to I2C controller in unit of MHz */
	182	unsigned int cm_get_l4_sp_clk_hz(void);
	183	#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000)
	184	#endif
	185	#define CONFIG_CMD_I2C
	186
7fb0f596 SR	187	/*
	188	* QSPI support
	189	*/
7fb0f596	190	/* Enable multiple SPI NOR flash manufacturers */
cbc9544d	191	#ifndef CONFIG_SPL_BUILD
7fb0f596	192	#define CONFIG_SPI_FLASH_MTD
55b4312b MV	193	#define CONFIG_CMD_MTDPARTS
	194	#define CONFIG_MTD_DEVICE
	195	#define CONFIG_MTD_PARTITIONS
	196	#define MTDIDS_DEFAULT "nor0=ff705000.spi"
cbc9544d	197	#endif
7fb0f596 SR	198	/* QSPI reference clock */
	199	#ifndef __ASSEMBLY__
	200	unsigned int cm_get_qspi_controller_clk_hz(void);
	201	#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
	202	#endif
	203	#define CONFIG_CQSPI_DECODER 0
	204	#define CONFIG_CMD_SF
ab48b19a	205	#define CONFIG_SPI_FLASH_BAR
7fb0f596	206
0c745d00 MV	207	/*
	208	* Designware SPI support
	209	*/
a6e73591	210	#define CONFIG_CMD_SPI
a6e73591	211
5095ee08 PM	212	/*
	213	* Serial Driver
	214	*/
5095ee08 PM	215	#define CONFIG_SYS_NS16550_SERIAL
	216	#define CONFIG_SYS_NS16550_REG_SIZE -4
	217	#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
	218	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	219	#define CONFIG_SYS_NS16550_CLK 1000000
	220	#else
	221	#define CONFIG_SYS_NS16550_CLK 100000000
	222	#endif
	223	#define CONFIG_CONS_INDEX 1
	224	#define CONFIG_BAUDRATE 115200
	225
20cadbbe MV	226	/*
	227	* USB
	228	*/
	229	#ifdef CONFIG_CMD_USB
	230	#define CONFIG_USB_DWC2
	231	#define CONFIG_USB_STORAGE
	232	/*
	233	* NOTE: User must define either of the following to select which
	234	* of the two USB controllers available on SoCFPGA to use.
	235	* The DWC2 driver doesn't support multiple USB controllers.
	236	* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS
	237	* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
	238	*/
	239	#endif
	240
0223a95c MV	241	/*
	242	* USB Gadget (DFU, UMS)
	243	*/
	244	#if defined(CONFIG_CMD_DFU) \|\| defined(CONFIG_CMD_USB_MASS_STORAGE)
	245	#define CONFIG_USB_GADGET
e30824f4	246	#define CONFIG_USB_GADGET_DWC2_OTG
0223a95c MV	247	#define CONFIG_USB_GADGET_DUALSPEED
	248	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	249
	250	/* USB Composite download gadget - g_dnl */
01acd6ab PK	251	#define CONFIG_USB_GADGET_DOWNLOAD
01acd6ab PK	252	#define CONFIG_USB_FUNCTION_MASS_STORAGE
0223a95c	253
01acd6ab	254	#define CONFIG_USB_FUNCTION_DFU
0223a95c MV	255	#define CONFIG_DFU_MMC
	256	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
	257	#define DFU_DEFAULT_POLL_TIMEOUT 300
	258
	259	/* USB IDs */
	260	#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */
	261	#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */
	262	#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
	263	#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM
	264	#ifndef CONFIG_G_DNL_MANUFACTURER
a5cad677	265	#define CONFIG_G_DNL_MANUFACTURER CONFIG_SYS_VENDOR
0223a95c MV	266	#endif
	267	#endif
	268
5095ee08 PM	269	/*
	270	* U-Boot environment
	271	*/
	272	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	273	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	274	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
5095ee08 PM	275	#define CONFIG_ENV_SIZE 4096
	276
	277	/*
	278	* SPL
34584d19 MV	279	*
	280	* SRAM Memory layout:
	281	*
	282	* 0xFFFF_0000 ...... Start of SRAM
	283	* 0xFFFF_xxxx ...... Top of stack (grows down)
	284	* 0xFFFF_yyyy ...... Malloc area
	285	* 0xFFFF_zzzz ...... Global Data
	286	* 0xFFFF_FF00 ...... End of SRAM
5095ee08 PM	287	*/
5095ee08 PM	288	#define CONFIG_SPL_FRAMEWORK
5095ee08	289	#define CONFIG_SPL_RAM_DEVICE
34584d19	290	#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
6868160a	291	#define CONFIG_SPL_MAX_SIZE (64 * 1024)
7599b53d MV	292	#ifdef CONFIG_SPL_BUILD
	293	#define CONFIG_SYS_MALLOC_SIMPLE
	294	#endif
5095ee08	295
5095ee08 PM	296	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	297	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	298	#define CONFIG_SPL_WATCHDOG_SUPPORT
	299	#define CONFIG_SPL_SERIAL_SUPPORT
d3f34e75	300	#define CONFIG_SPL_MMC_SUPPORT
346d6f56	301	#define CONFIG_SPL_SPI_SUPPORT
d3f34e75 MV	302
	303	/* SPL SDMMC boot support */
	304	#ifdef CONFIG_SPL_MMC_SUPPORT
	305	#if defined(CONFIG_SPL_FAT_SUPPORT) \|\| defined(CONFIG_SPL_EXT_SUPPORT)
	306	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2
	307	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
	308	#define CONFIG_SPL_LIBDISK_SUPPORT
	309	#else
	310	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 3
	311	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xa00 /* offset 2560 sect (1M+256k) */
	312	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
	313	#endif
	314	#endif
5095ee08	315
346d6f56 MV	316	/* SPL QSPI boot support */
	317	#ifdef CONFIG_SPL_SPI_SUPPORT
	318	#define CONFIG_DM_SEQ_ALIAS 1
	319	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	320	#define CONFIG_SPL_SPI_LOAD
	321	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
	322	#endif
	323
a717b811 DN	324	/*
	325	* Stack setup
	326	*/
	327	#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
	328
5095ee08	329	#endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */