[people/ms/u-boot.git] / include / configs / uniphier.h

/*
 * Copyright (C) 2012-2015 Panasonic Corporation
 *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/* U-boot - Common settings for UniPhier Family */

#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__

#if defined(CONFIG_MACH_PH1_PRO4)
#define CONFIG_DDR_NUM_CH0 2
#define CONFIG_DDR_NUM_CH1 2

/* Physical start address of SDRAM */
#define CONFIG_SDRAM0_BASE	0x80000000
#define CONFIG_SDRAM0_SIZE	0x20000000
#define CONFIG_SDRAM1_BASE	0xa0000000
#define CONFIG_SDRAM1_SIZE	0x20000000
#endif

#if defined(CONFIG_MACH_PH1_LD4)
#define CONFIG_DDR_NUM_CH0 1
#define CONFIG_DDR_NUM_CH1 1

/* Physical start address of SDRAM */
#define CONFIG_SDRAM0_BASE	0x80000000
#define CONFIG_SDRAM0_SIZE	0x10000000
#define CONFIG_SDRAM1_BASE	0x90000000
#define CONFIG_SDRAM1_SIZE	0x10000000
#endif

#if defined(CONFIG_MACH_PH1_SLD8)
#define CONFIG_DDR_NUM_CH0 1
#define CONFIG_DDR_NUM_CH1 1

/* Physical start address of SDRAM */
#define CONFIG_SDRAM0_BASE	0x80000000
#define CONFIG_SDRAM0_SIZE	0x10000000
#define CONFIG_SDRAM1_BASE	0x90000000
#define CONFIG_SDRAM1_SIZE	0x10000000
#endif

#define CONFIG_I2C_EEPROM
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10

/*
 * Support card address map
 */
#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
# define CONFIG_SUPPORT_CARD_BASE	0x03f00000
# define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
# define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00090000)
# define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
#endif

#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
# define CONFIG_SUPPORT_CARD_BASE	0x08000000
# define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
# define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00401630)
# define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00200000)
#endif

#ifdef CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_COM1		CONFIG_SUPPORT_CARD_UART_BASE
#define CONFIG_SYS_NS16550_CLK		12288000
#define CONFIG_SYS_NS16550_REG_SIZE	-2
#endif

/* TODO: move to Kconfig and device tree */
#if 0
#define CONFIG_SYS_NS16550_SERIAL
#endif

#define CONFIG_SMC911X

#define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT

#define CONFIG_SYS_MALLOC_F_LEN  0x2000

/*-----------------------------------------------------------------------
 * MMU and Cache Setting
 *----------------------------------------------------------------------*/

/* Comment out the following to enable L1 cache */
/* #define CONFIG_SYS_ICACHE_OFF */
/* #define CONFIG_SYS_DCACHE_OFF */

/* Comment out the following to enable L2 cache */
#define CONFIG_UNIPHIER_L2CACHE_ON

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)

#define CONFIG_TIMESTAMP

/* FLASH related */
#define CONFIG_MTD_DEVICE

/*
 * uncomment the following to disable FLASH related code.
 */
/* #define CONFIG_SYS_NO_FLASH */

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI

#define CONFIG_SYS_MAX_FLASH_SECT	256
#define CONFIG_SYS_MONITOR_BASE		0
#define CONFIG_SYS_FLASH_BASE		0

/*
 * flash_toggle does not work for out supoort card.
 * We need to use flash_status_poll.
 */
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL

#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */

#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2

/* serial console configuration */
#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_GENERIC_BOARD

#if !defined(CONFIG_SPL_BUILD)
#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_USE_ARCH_MEMCPY
#endif

#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_CONS_INDEX		1

/*
 * For NAND booting the environment is embedded in the U-Boot image. Please take
 * look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
 */
/* #define CONFIG_ENV_IS_IN_NAND */
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE				0x2000
#define CONFIG_ENV_OFFSET			0x0
/* #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */

/* Time clock 1MHz */
#define CONFIG_SYS_TIMER_RATE			1000000

/*
 * By default, ARP timeout is 5 sec.
 * The first ARP request does not seem to work.
 * So we need to retry ARP request anyway.
 * We want to shrink the interval until the second ARP request.
 */
#define CONFIG_ARP_TIMEOUT	500UL  /* 0.5 msec */

#define CONFIG_SYS_MAX_NAND_DEVICE			1
#define CONFIG_SYS_NAND_MAX_CHIPS			2
#define CONFIG_SYS_NAND_ONFI_DETECTION

#define CONFIG_NAND_DENALI_ECC_SIZE			1024

#define CONFIG_SYS_NAND_REGS_BASE			0x68100000
#define CONFIG_SYS_NAND_DATA_BASE			0x68000000

#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_DATA_BASE + 0x10)

#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BAD_BLOCK_POS			0

/* USB */
#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_DM

/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01000000)

#define CONFIG_BOOTDELAY			3
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_AUTOBOOT_KEYED			1
#define CONFIG_AUTOBOOT_PROMPT	\
	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR		"d"
#define CONFIG_AUTOBOOT_STOP_STR		" "

/*
 * Network Configuration
 */
#define CONFIG_ETHADDR			00:21:83:24:00:00
#define CONFIG_SERVERIP			192.168.11.1
#define CONFIG_IPADDR			192.168.11.10
#define CONFIG_GATEWAYIP		192.168.11.1
#define CONFIG_NETMASK			255.255.255.0

#define CONFIG_LOADADDR			0x84000000
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_BOOTFILE			"fit.itb"

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/

#define CONFIG_BOOTCOMMAND		"run $bootmode"

#define CONFIG_ROOTPATH			"/nfs/root/path"
#define CONFIG_NFSBOOTCOMMAND						\
	"setenv bootargs $bootargs root=/dev/nfs rw "			\
	"nfsroot=$serverip:$rootpath "					\
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
	"tftpboot; bootm;"

#define CONFIG_BOOTARGS		" user_debug=0x1f init=/sbin/init"

#define	CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"image_offset=0x00080000\0"		\
	"image_size=0x00f00000\0"		\
	"verify=n\0"				\
	"nandupdate=nand erase 0 0x100000 &&"				\
		   "tftpboot u-boot-spl.bin &&"				\
		   "nand write $loadaddr 0 0x10000 &&"			\
		   "tftpboot u-boot-dtb.img &&"				\
		   "nand write $loadaddr 0x10000 0xf0000\0"		\
	"norboot=run add_default_bootargs &&"				\
		"bootm $image_offset\0"					\
	"nandboot=run add_default_bootargs &&"				\
		 "nand read $loadaddr $image_offset $image_size &&"	\
		 "bootm\0"						\
	"add_default_bootargs=setenv bootargs $bootargs"		\
		" console=ttyS0,$baudrate\0"				\

/* Open Firmware flat tree */
#define CONFIG_OF_LIBFDT

#define CONFIG_HAVE_ARM_SECURE

/* Memory Size & Mapping */
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SDRAM0_BASE

#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE
/* Thre is no memory hole */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_SIZE	(CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE)
#else
#define CONFIG_NR_DRAM_BANKS		2
#define CONFIG_SYS_SDRAM_SIZE	(CONFIG_SDRAM0_SIZE)
#endif

#define CONFIG_SYS_TEXT_BASE		0x84000000

#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
#define CONFIG_SPL_TEXT_BASE		0x00040000
#endif
#if defined(CONFIG_MACH_PH1_PRO4)
#define CONFIG_SPL_TEXT_BASE		0x00100000
#endif

#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif

#define CONFIG_SYS_SPL_MALLOC_START	(0x0ff00000)
#define CONFIG_SYS_SPL_MALLOC_SIZE	(0x00004000)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR		(0x0ff08000)
#else
#define CONFIG_SYS_INIT_SP_ADDR		((CONFIG_SYS_TEXT_BASE) - 0x00001000)
#endif

#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SUPPORT

#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* for mem_malloc_init */
#define CONFIG_SPL_LIBGENERIC_SUPPORT

#define CONFIG_SPL_BOARD_INIT

#define CONFIG_SYS_NAND_U_BOOT_OFFS		0x10000

#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
Commit	Line	Data
5894ca00	1	/*
0e063dff	2	* Copyright (C) 2012-2015 Panasonic Corporation
5894ca00 MY	3	* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	/* U-boot - Common settings for UniPhier Family */
	9
	10	#ifndef __CONFIG_UNIPHIER_COMMON_H__
	11	#define __CONFIG_UNIPHIER_COMMON_H__
	12
f5d0b9b2 MY	13	#if defined(CONFIG_MACH_PH1_PRO4)
	14	#define CONFIG_DDR_NUM_CH0 2
	15	#define CONFIG_DDR_NUM_CH1 2
	16
	17	/* Physical start address of SDRAM */
	18	#define CONFIG_SDRAM0_BASE 0x80000000
	19	#define CONFIG_SDRAM0_SIZE 0x20000000
	20	#define CONFIG_SDRAM1_BASE 0xa0000000
	21	#define CONFIG_SDRAM1_SIZE 0x20000000
	22	#endif
	23
	24	#if defined(CONFIG_MACH_PH1_LD4)
	25	#define CONFIG_DDR_NUM_CH0 1
	26	#define CONFIG_DDR_NUM_CH1 1
	27
	28	/* Physical start address of SDRAM */
	29	#define CONFIG_SDRAM0_BASE 0x80000000
	30	#define CONFIG_SDRAM0_SIZE 0x10000000
	31	#define CONFIG_SDRAM1_BASE 0x90000000
	32	#define CONFIG_SDRAM1_SIZE 0x10000000
	33	#endif
	34
	35	#if defined(CONFIG_MACH_PH1_SLD8)
	36	#define CONFIG_DDR_NUM_CH0 1
	37	#define CONFIG_DDR_NUM_CH1 1
	38
	39	/* Physical start address of SDRAM */
	40	#define CONFIG_SDRAM0_BASE 0x80000000
	41	#define CONFIG_SDRAM0_SIZE 0x10000000
	42	#define CONFIG_SDRAM1_BASE 0x90000000
	43	#define CONFIG_SDRAM1_SIZE 0x10000000
	44	#endif
	45
233e42a9 MY	46	#define CONFIG_I2C_EEPROM
	47	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
	48
5894ca00 MY	49	/*
	50	* Support card address map
	51	*/
	52	#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
	53	# define CONFIG_SUPPORT_CARD_BASE 0x03f00000
	54	# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
	55	# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000)
	56	# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
	57	#endif
	58
	59	#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
	60	# define CONFIG_SUPPORT_CARD_BASE 0x08000000
	61	# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
	62	# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630)
	63	# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000)
	64	#endif
	65
d064cbff	66	#ifdef CONFIG_SYS_NS16550_SERIAL
5894ca00 MY	67	#define CONFIG_SYS_NS16550
	68	#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE
	69	#define CONFIG_SYS_NS16550_CLK 12288000
	70	#define CONFIG_SYS_NS16550_REG_SIZE -2
d064cbff	71	#endif
5894ca00	72
f5d0b9b2 MY	73	/* TODO: move to Kconfig and device tree */
	74	#if 0
	75	#define CONFIG_SYS_NS16550_SERIAL
	76	#endif
	77
	78	#define CONFIG_SMC911X
	79
5894ca00 MY	80	#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
	81	#define CONFIG_SMC911X_32_BIT
	82
0d8c7f74	83	#define CONFIG_SYS_MALLOC_F_LEN 0x2000
5894ca00 MY	84
	85	/*-----------------------------------------------------------------------
	86	* MMU and Cache Setting
	87	----------------------------------------------------------------------/
	88
	89	/* Comment out the following to enable L1 cache */
	90	/* #define CONFIG_SYS_ICACHE_OFF */
	91	/* #define CONFIG_SYS_DCACHE_OFF */
	92
	93	/* Comment out the following to enable L2 cache */
	94	#define CONFIG_UNIPHIER_L2CACHE_ON
	95
	96	#define CONFIG_DISPLAY_CPUINFO
	97	#define CONFIG_DISPLAY_BOARDINFO
84ccd791	98	#define CONFIG_BOARD_EARLY_INIT_F
7a3620b2	99	#define CONFIG_BOARD_EARLY_INIT_R
5894ca00 MY	100	#define CONFIG_BOARD_LATE_INIT
	101
	102	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
	103
	104	#define CONFIG_TIMESTAMP
	105
	106	/* FLASH related */
	107	#define CONFIG_MTD_DEVICE
	108
	109	/*
	110	* uncomment the following to disable FLASH related code.
	111	*/
	112	/* #define CONFIG_SYS_NO_FLASH */
	113
	114	#define CONFIG_FLASH_CFI_DRIVER
	115	#define CONFIG_SYS_FLASH_CFI
	116
	117	#define CONFIG_SYS_MAX_FLASH_SECT 256
	118	#define CONFIG_SYS_MONITOR_BASE 0
	119	#define CONFIG_SYS_FLASH_BASE 0
	120
	121	/*
	122	* flash_toggle does not work for out supoort card.
	123	* We need to use flash_status_poll.
	124	*/
	125	#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
	126
	127	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
	128
7a3620b2	129	#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
5894ca00 MY	130
	131	/* serial console configuration */
	132	#define CONFIG_BAUDRATE 115200
	133
	134	#define CONFIG_SYS_GENERIC_BOARD
	135
	136	#if !defined(CONFIG_SPL_BUILD)
	137	#define CONFIG_USE_ARCH_MEMSET
	138	#define CONFIG_USE_ARCH_MEMCPY
	139	#endif
	140
	141	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	142
	143	#define CONFIG_CMDLINE_EDITING /* add command line history */
5894ca00 MY	144	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	145	/* Print Buffer Size */
	146	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	147	#define CONFIG_SYS_MAXARGS 16 /* max number of command */
	148	/* Boot Argument Buffer Size */
	149	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	150
	151	#define CONFIG_CONS_INDEX 1
	152
	153	/*
	154	* For NAND booting the environment is embedded in the U-Boot image. Please take
	155	* look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
	156	*/
	157	/* #define CONFIG_ENV_IS_IN_NAND */
	158	#define CONFIG_ENV_IS_NOWHERE
	159	#define CONFIG_ENV_SIZE 0x2000
	160	#define CONFIG_ENV_OFFSET 0x0
	161	/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
	162
	163	/* Time clock 1MHz */
	164	#define CONFIG_SYS_TIMER_RATE 1000000
	165
	166	/*
	167	* By default, ARP timeout is 5 sec.
	168	* The first ARP request does not seem to work.
	169	* So we need to retry ARP request anyway.
	170	* We want to shrink the interval until the second ARP request.
	171	*/
	172	#define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */
	173
5894ca00 MY	174	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	175	#define CONFIG_SYS_NAND_MAX_CHIPS 2
	176	#define CONFIG_SYS_NAND_ONFI_DETECTION
	177
	178	#define CONFIG_NAND_DENALI_ECC_SIZE 1024
	179
	180	#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
	181	#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
	182
	183	#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
	184
	185	#define CONFIG_SYS_NAND_USE_FLASH_BBT
	186	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
	187
495deb44	188	/* USB */
495deb44 MY	189	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	190	#define CONFIG_CMD_FAT
	191	#define CONFIG_FAT_WRITE
	192	#define CONFIG_DOS_PARTITION
	193
d8bec60c MY	194	#define CONFIG_CMD_DM
d8bec60c MY	195
5894ca00 MY	196	/* memtest works on */
	197	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	198	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
	199
	200	#define CONFIG_BOOTDELAY 3
	201	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	202	#define CONFIG_AUTOBOOT_KEYED 1
	203	#define CONFIG_AUTOBOOT_PROMPT \
	204	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
	205	#define CONFIG_AUTOBOOT_DELAY_STR "d"
	206	#define CONFIG_AUTOBOOT_STOP_STR " "
	207
	208	/*
	209	* Network Configuration
	210	*/
	211	#define CONFIG_ETHADDR 00:21:83:24:00:00
	212	#define CONFIG_SERVERIP 192.168.11.1
	213	#define CONFIG_IPADDR 192.168.11.10
	214	#define CONFIG_GATEWAYIP 192.168.11.1
	215	#define CONFIG_NETMASK 255.255.255.0
	216
	217	#define CONFIG_LOADADDR 0x84000000
	218	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	219	#define CONFIG_BOOTFILE "fit.itb"
	220
	221	#define CONFIG_CMDLINE_EDITING /* add command line history */
	222
	223	#define CONFIG_BOOTCOMMAND "run $bootmode"
	224
	225	#define CONFIG_ROOTPATH "/nfs/root/path"
	226	#define CONFIG_NFSBOOTCOMMAND \
	227	"setenv bootargs $bootargs root=/dev/nfs rw " \
	228	"nfsroot=$serverip:$rootpath " \
	229	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
	230	"tftpboot; bootm;"
	231
	232	#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init"
	233
	234	#define CONFIG_EXTRA_ENV_SETTINGS \
	235	"netdev=eth0\0" \
	236	"image_offset=0x00080000\0" \
	237	"image_size=0x00f00000\0" \
	238	"verify=n\0" \
75bc8e85 MY	239	"nandupdate=nand erase 0 0x100000 &&" \
	240	"tftpboot u-boot-spl.bin &&" \
	241	"nand write $loadaddr 0 0x10000 &&" \
	242	"tftpboot u-boot-dtb.img &&" \
	243	"nand write $loadaddr 0x10000 0xf0000\0" \
0e063dff	244	"norboot=run add_default_bootargs &&" \
5894ca00	245	"bootm $image_offset\0" \
0e063dff MY	246	"nandboot=run add_default_bootargs &&" \
	247	"nand read $loadaddr $image_offset $image_size &&" \
	248	"bootm\0" \
5894ca00 MY	249	"add_default_bootargs=setenv bootargs $bootargs" \
	250	" console=ttyS0,$baudrate\0" \
	251
5894ca00 MY	252	/* Open Firmware flat tree */
	253	#define CONFIG_OF_LIBFDT
	254
	255	#define CONFIG_HAVE_ARM_SECURE
	256
	257	/* Memory Size & Mapping */
	258	#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE
	259
	260	#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE
	261	/* Thre is no memory hole */
	262	#define CONFIG_NR_DRAM_BANKS 1
	263	#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE)
	264	#else
	265	#define CONFIG_NR_DRAM_BANKS 2
	266	#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE)
	267	#endif
	268
	269	#define CONFIG_SYS_TEXT_BASE 0x84000000
	270
f5d0b9b2 MY	271	#if defined(CONFIG_MACH_PH1_LD4) \|\| defined(CONFIG_MACH_PH1_SLD8)
	272	#define CONFIG_SPL_TEXT_BASE 0x00040000
	273	#endif
	274	#if defined(CONFIG_MACH_PH1_PRO4)
	275	#define CONFIG_SPL_TEXT_BASE 0x00100000
	276	#endif
	277
b67932e3	278	#ifndef CONFIG_SPL_BUILD
5894ca00 MY	279	#define CONFIG_SKIP_LOWLEVEL_INIT
	280	#endif
	281
	282	#define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000)
	283	#define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000)
	284
7e421d64	285	#ifdef CONFIG_SPL_BUILD
5894ca00	286	#define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000)
7e421d64 MY	287	#else
	288	#define CONFIG_SYS_INIT_SP_ADDR ((CONFIG_SYS_TEXT_BASE) - 0x00001000)
	289	#endif
5894ca00 MY	290
	291	#define CONFIG_SPL_FRAMEWORK
	292	#define CONFIG_SPL_NAND_SUPPORT
	293
	294	#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */
	295	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	296
	297	#define CONFIG_SPL_BOARD_INIT
	298
	299	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
	300
	301	#endif /* __CONFIG_UNIPHIER_COMMON_H__ */