]>
Commit | Line | Data |
---|---|---|
c2e49f70 RA |
1 | /* |
2 | * esd vme8349 U-Boot configuration file | |
3 | * Copyright (c) 2008, 2009 esd gmbh Hannover Germany | |
4 | * | |
2ae18241 | 5 | * (C) Copyright 2006-2010 |
c2e49f70 RA |
6 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
7 | * | |
8 | * reinhard.arlt@esd-electronics.de | |
9 | * Based on the MPC8349EMDS config. | |
10 | * | |
11 | * See file CREDITS for list of people who contributed to this | |
12 | * project. | |
13 | * | |
14 | * This program is free software; you can redistribute it and/or | |
15 | * modify it under the terms of the GNU General Public License as | |
16 | * published by the Free Software Foundation; either version 2 of | |
17 | * the License, or (at your option) any later version. | |
18 | * | |
19 | * This program is distributed in the hope that it will be useful, | |
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
22 | * GNU General Public License for more details. | |
23 | * | |
24 | * You should have received a copy of the GNU General Public License | |
25 | * along with this program; if not, write to the Free Software | |
26 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
27 | * MA 02111-1307 USA | |
28 | */ | |
29 | ||
30 | /* | |
31 | * vme8349 board configuration file. | |
32 | */ | |
33 | ||
34 | #ifndef __CONFIG_H | |
35 | #define __CONFIG_H | |
36 | ||
1dee9be6 RA |
37 | /* |
38 | * Top level Makefile configuration choices | |
39 | */ | |
2ae18241 | 40 | #ifdef CONFIG_CADDY2 |
1dee9be6 RA |
41 | #define VME_CADDY2 |
42 | #endif | |
43 | ||
c2e49f70 RA |
44 | /* |
45 | * High Level Configuration Options | |
46 | */ | |
47 | #define CONFIG_E300 1 /* E300 Family */ | |
48 | #define CONFIG_MPC83xx 1 /* MPC83xx family */ | |
49 | #define CONFIG_MPC834x 1 /* MPC834x family */ | |
50 | #define CONFIG_MPC8349 1 /* MPC8349 specific */ | |
51 | #define CONFIG_VME8349 1 /* ESD VME8349 board specific */ | |
52 | ||
2ae18241 WD |
53 | #define CONFIG_SYS_TEXT_BASE 0xFFF00000 |
54 | ||
1dee9be6 RA |
55 | #define CONFIG_MISC_INIT_R |
56 | ||
c2e49f70 RA |
57 | #define CONFIG_PCI |
58 | /* Don't enable PCI2 on vme834x - it doesn't exist physically. */ | |
59 | #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ | |
60 | ||
2ae18241 WD |
61 | #define CONFIG_PCI_66M |
62 | #ifdef CONFIG_PCI_66M | |
c2e49f70 RA |
63 | #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ |
64 | #else | |
65 | #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ | |
66 | #endif | |
67 | ||
68 | #ifndef CONFIG_SYS_CLK_FREQ | |
2ae18241 | 69 | #ifdef CONFIG_PCI_66M |
c2e49f70 RA |
70 | #define CONFIG_SYS_CLK_FREQ 66000000 |
71 | #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 | |
72 | #else | |
73 | #define CONFIG_SYS_CLK_FREQ 33000000 | |
74 | #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 | |
75 | #endif | |
76 | #endif | |
77 | ||
78 | #define CONFIG_SYS_IMMR 0xE0000000 | |
79 | ||
80 | #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ | |
81 | #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ | |
82 | #define CONFIG_SYS_MEMTEST_END 0x00100000 | |
83 | ||
84 | /* | |
85 | * DDR Setup | |
86 | */ | |
87 | #define CONFIG_DDR_ECC /* only for ECC DDR module */ | |
88 | #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ | |
1dee9be6 RA |
89 | #define CONFIG_SPD_EEPROM |
90 | #define SPD_EEPROM_ADDRESS 0x54 | |
91 | #define CONFIG_SYS_READ_SPD vme8349_read_spd | |
c2e49f70 RA |
92 | #define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */ |
93 | ||
94 | /* | |
95 | * 32-bit data path mode. | |
96 | * | |
97 | * Please note that using this mode for devices with the real density of 64-bit | |
98 | * effectively reduces the amount of available memory due to the effect of | |
99 | * wrapping around while translating address to row/columns, for example in the | |
100 | * 256MB module the upper 128MB get aliased with contents of the lower | |
101 | * 128MB); normally this define should be used for devices with real 32-bit | |
102 | * data path. | |
103 | */ | |
104 | #undef CONFIG_DDR_32BIT | |
105 | ||
106 | #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/ | |
107 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE | |
108 | #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE | |
109 | #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ | |
110 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) | |
111 | #define CONFIG_DDR_2T_TIMING | |
1dee9be6 | 112 | #define CONFIG_SYS_DDRCDR 0x80080001 |
c2e49f70 RA |
113 | |
114 | /* | |
115 | * FLASH on the Local Bus | |
116 | */ | |
117 | #define CONFIG_SYS_FLASH_CFI | |
118 | #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ | |
1dee9be6 RA |
119 | #ifdef VME_CADDY2 |
120 | #define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ | |
121 | #define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ | |
122 | #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ | |
4e7e12df | 123 | (2 << BR_PS_SHIFT) | /* 16bit */ \ |
1dee9be6 | 124 | BR_V) /* valid */ |
c2e49f70 | 125 | |
1dee9be6 RA |
126 | #define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */ |
127 | #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE | |
128 | #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */ | |
129 | #else | |
130 | #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ | |
131 | #define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ | |
c2e49f70 | 132 | #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ |
4e7e12df | 133 | (2 << BR_PS_SHIFT) | /* 16bit */ \ |
c2e49f70 RA |
134 | BR_V) /* valid */ |
135 | ||
1dee9be6 | 136 | #define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */ |
c2e49f70 | 137 | #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE |
1dee9be6 RA |
138 | #define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */ |
139 | #endif | |
140 | /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ | |
c2e49f70 RA |
141 | |
142 | #define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801) | |
1dee9be6 | 143 | #define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200) |
c2e49f70 | 144 | #define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000 |
1dee9be6 | 145 | #define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011) |
c2e49f70 RA |
146 | |
147 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
148 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ | |
149 | ||
150 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
151 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */ | |
152 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */ | |
153 | ||
14d0a02a | 154 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
c2e49f70 RA |
155 | |
156 | #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) | |
157 | #define CONFIG_SYS_RAMBOOT | |
158 | #else | |
1dee9be6 | 159 | #undef CONFIG_SYS_RAMBOOT |
c2e49f70 RA |
160 | #endif |
161 | ||
162 | #define CONFIG_SYS_INIT_RAM_LOCK 1 | |
163 | #define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */ | |
553f0982 | 164 | #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* size */ |
c2e49f70 RA |
165 | |
166 | #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* size init data */ | |
553f0982 | 167 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
c2e49f70 RA |
168 | CONFIG_SYS_GBL_DATA_SIZE) |
169 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
170 | ||
171 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */ | |
172 | #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Malloc size */ | |
173 | ||
174 | /* | |
175 | * Local Bus LCRR and LBCR regs | |
1dee9be6 | 176 | * LCRR: no DLL bypass, Clock divider is 4 |
c2e49f70 RA |
177 | * External Local Bus rate is |
178 | * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV | |
179 | */ | |
c7190f02 | 180 | #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 |
c2e49f70 RA |
181 | #define CONFIG_SYS_LBC_LBCR 0x00000000 |
182 | ||
183 | #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ | |
184 | ||
185 | /* | |
186 | * Serial Port | |
187 | */ | |
188 | #define CONFIG_CONS_INDEX 1 | |
c2e49f70 RA |
189 | #define CONFIG_SYS_NS16550 |
190 | #define CONFIG_SYS_NS16550_SERIAL | |
191 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
192 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
193 | ||
194 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
195 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} | |
196 | ||
197 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) | |
198 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) | |
199 | ||
200 | #define CONFIG_CMDLINE_EDITING /* add command line history */ | |
a059e90e | 201 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
c2e49f70 RA |
202 | /* Use the HUSH parser */ |
203 | #define CONFIG_SYS_HUSH_PARSER | |
204 | #ifdef CONFIG_SYS_HUSH_PARSER | |
205 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
206 | #endif | |
207 | ||
208 | /* pass open firmware flat tree */ | |
209 | #define CONFIG_OF_LIBFDT | |
210 | #define CONFIG_OF_BOARD_SETUP | |
211 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
212 | ||
213 | /* I2C */ | |
214 | #define CONFIG_I2C_MULTI_BUS | |
215 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
216 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
217 | #define CONFIG_FSL_I2C | |
218 | #define CONFIG_I2C_CMD_TREE | |
219 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ | |
220 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
221 | #define CONFIG_SYS_I2C_NOPROBES {{0, 0x69}} /* Don't probe these addrs */ | |
222 | #define CONFIG_SYS_I2C1_OFFSET 0x3000 | |
223 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
224 | #define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C1_OFFSET | |
efaf6f1b | 225 | /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */ |
c2e49f70 RA |
226 | |
227 | #define CONFIG_SYS_I2C_8574_ADDR2 0x20 /* I2C1, PCF8574 */ | |
228 | ||
229 | /* TSEC */ | |
230 | #define CONFIG_SYS_TSEC1_OFFSET 0x24000 | |
231 | #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) | |
232 | #define CONFIG_SYS_TSEC2_OFFSET 0x25000 | |
233 | #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET) | |
234 | ||
235 | /* | |
236 | * General PCI | |
237 | * Addresses are mapped 1-1. | |
238 | */ | |
239 | #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 | |
240 | #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE | |
241 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ | |
242 | #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 | |
243 | #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE | |
244 | #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ | |
245 | #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 | |
246 | #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 | |
247 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ | |
248 | ||
249 | #define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 | |
250 | #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE | |
251 | #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ | |
252 | #define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 | |
253 | #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE | |
254 | #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ | |
255 | #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 | |
256 | #define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 | |
257 | #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ | |
258 | ||
259 | #if defined(CONFIG_PCI) | |
260 | ||
261 | #define PCI_64BIT | |
262 | #define PCI_ONE_PCI1 | |
263 | #if defined(PCI_64BIT) | |
264 | #undef PCI_ALL_PCI1 | |
265 | #undef PCI_TWO_PCI1 | |
266 | #undef PCI_ONE_PCI1 | |
267 | #endif | |
268 | ||
1dee9be6 | 269 | #ifndef VME_CADDY2 |
c2e49f70 | 270 | #define CONFIG_NET_MULTI |
1dee9be6 RA |
271 | #endif |
272 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
c2e49f70 RA |
273 | |
274 | #undef CONFIG_EEPRO100 | |
275 | #undef CONFIG_TULIP | |
276 | ||
277 | #if !defined(CONFIG_PCI_PNP) | |
278 | #define PCI_ENET0_IOADDR 0xFIXME | |
279 | #define PCI_ENET0_MEMADDR 0xFIXME | |
280 | #define PCI_IDSEL_NUMBER 0xFIXME | |
281 | #endif | |
282 | ||
1dee9be6 RA |
283 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
284 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ | |
285 | ||
c2e49f70 RA |
286 | #endif /* CONFIG_PCI */ |
287 | ||
288 | /* | |
289 | * TSEC configuration | |
290 | */ | |
1dee9be6 RA |
291 | #ifdef VME_CADDY2 |
292 | #define CONFIG_E1000 | |
293 | #else | |
c2e49f70 | 294 | #define CONFIG_TSEC_ENET /* TSEC ethernet support */ |
1dee9be6 | 295 | #endif |
c2e49f70 RA |
296 | |
297 | #if defined(CONFIG_TSEC_ENET) | |
298 | #ifndef CONFIG_NET_MULTI | |
299 | #define CONFIG_NET_MULTI | |
300 | #endif | |
301 | ||
1dee9be6 | 302 | #define CONFIG_GMII /* MII PHY management */ |
c2e49f70 RA |
303 | #define CONFIG_TSEC1 |
304 | #define CONFIG_TSEC1_NAME "TSEC0" | |
305 | #define CONFIG_TSEC2 | |
306 | #define CONFIG_TSEC2_NAME "TSEC1" | |
307 | #define CONFIG_PHY_M88E1111 | |
308 | #define TSEC1_PHY_ADDR 0x08 | |
309 | #define TSEC2_PHY_ADDR 0x10 | |
310 | #define TSEC1_PHYIDX 0 | |
311 | #define TSEC2_PHYIDX 0 | |
312 | #define TSEC1_FLAGS TSEC_GIGABIT | |
313 | #define TSEC2_FLAGS TSEC_GIGABIT | |
314 | ||
315 | /* Options are: TSEC[0-1] */ | |
316 | #define CONFIG_ETHPRIME "TSEC0" | |
317 | ||
318 | #endif /* CONFIG_TSEC_ENET */ | |
319 | ||
1dee9be6 RA |
320 | #if defined(CONFIG_E1000) |
321 | #ifndef CONFIG_NET_MULTI | |
322 | #define CONFIG_NET_MULTI | |
323 | #endif | |
324 | #endif | |
325 | ||
c2e49f70 RA |
326 | /* |
327 | * Environment | |
328 | */ | |
329 | #ifndef CONFIG_SYS_RAMBOOT | |
330 | #define CONFIG_ENV_IS_IN_FLASH | |
331 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0xc0000) | |
332 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ | |
333 | #define CONFIG_ENV_SIZE 0x2000 | |
334 | ||
335 | /* Address and size of Redundant Environment Sector */ | |
336 | #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) | |
337 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
338 | ||
339 | #else | |
340 | #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ | |
341 | #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ | |
342 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) | |
343 | #define CONFIG_ENV_SIZE 0x2000 | |
344 | #endif | |
345 | ||
346 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
347 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
348 | ||
349 | /* | |
350 | * BOOTP options | |
351 | */ | |
352 | #define CONFIG_BOOTP_BOOTFILESIZE | |
353 | #define CONFIG_BOOTP_BOOTPATH | |
354 | #define CONFIG_BOOTP_GATEWAY | |
355 | #define CONFIG_BOOTP_HOSTNAME | |
356 | ||
357 | /* | |
358 | * Command line configuration. | |
359 | */ | |
360 | #include <config_cmd_default.h> | |
361 | ||
362 | #define CONFIG_CMD_I2C | |
363 | #define CONFIG_CMD_MII | |
364 | #define CONFIG_CMD_PING | |
365 | #define CONFIG_CMD_DATE | |
366 | #define CONFIG_SYS_RTC_BUS_NUM 0x01 | |
367 | #define CONFIG_SYS_I2C_RTC_ADDR 0x32 | |
368 | #define CONFIG_RTC_RX8025 | |
369 | #define CONFIG_CMD_TSI148 | |
370 | ||
371 | #if defined(CONFIG_PCI) | |
372 | #define CONFIG_CMD_PCI | |
373 | #endif | |
374 | ||
375 | #if defined(CONFIG_SYS_RAMBOOT) | |
376 | #undef CONFIG_CMD_ENV | |
377 | #undef CONFIG_CMD_LOADS | |
378 | #endif | |
379 | ||
380 | #define CONFIG_CMD_ELF | |
381 | /* Pass Ethernet MAC to VxWorks */ | |
382 | #define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0 | |
383 | ||
384 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
385 | ||
386 | /* | |
387 | * Miscellaneous configurable options | |
388 | */ | |
389 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
390 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
391 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
392 | ||
393 | #if defined(CONFIG_CMD_KGDB) | |
394 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
395 | #else | |
396 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
397 | #endif | |
398 | ||
399 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
400 | #define CONFIG_SYS_MAXARGS 16 /* max num of command args */ | |
401 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */ | |
402 | #define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ | |
403 | ||
404 | /* | |
405 | * For booting Linux, the board info and command line data | |
9f530d59 | 406 | * have to be in the first 256 MB of memory, since this is |
c2e49f70 RA |
407 | * the maximum mapped by the Linux kernel during initialization. |
408 | */ | |
9f530d59 | 409 | #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Init Memory map for Linux*/ |
c2e49f70 RA |
410 | |
411 | #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ | |
412 | ||
413 | #define CONFIG_SYS_HRCW_LOW (\ | |
414 | HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ | |
415 | HRCWL_DDR_TO_SCB_CLK_1X1 |\ | |
416 | HRCWL_CSB_TO_CLKIN |\ | |
417 | HRCWL_VCO_1X2 |\ | |
418 | HRCWL_CORE_TO_CSB_2X1) | |
419 | ||
420 | #if defined(PCI_64BIT) | |
421 | #define CONFIG_SYS_HRCW_HIGH (\ | |
422 | HRCWH_PCI_HOST |\ | |
423 | HRCWH_64_BIT_PCI |\ | |
424 | HRCWH_PCI1_ARBITER_ENABLE |\ | |
425 | HRCWH_PCI2_ARBITER_DISABLE |\ | |
426 | HRCWH_CORE_ENABLE |\ | |
427 | HRCWH_FROM_0X00000100 |\ | |
428 | HRCWH_BOOTSEQ_DISABLE |\ | |
429 | HRCWH_SW_WATCHDOG_DISABLE |\ | |
430 | HRCWH_ROM_LOC_LOCAL_16BIT |\ | |
431 | HRCWH_TSEC1M_IN_GMII |\ | |
432 | HRCWH_TSEC2M_IN_GMII) | |
433 | #else | |
434 | #define CONFIG_SYS_HRCW_HIGH (\ | |
435 | HRCWH_PCI_HOST |\ | |
436 | HRCWH_32_BIT_PCI |\ | |
437 | HRCWH_PCI1_ARBITER_ENABLE |\ | |
438 | HRCWH_PCI2_ARBITER_ENABLE |\ | |
439 | HRCWH_CORE_ENABLE |\ | |
440 | HRCWH_FROM_0X00000100 |\ | |
441 | HRCWH_BOOTSEQ_DISABLE |\ | |
442 | HRCWH_SW_WATCHDOG_DISABLE |\ | |
443 | HRCWH_ROM_LOC_LOCAL_16BIT |\ | |
444 | HRCWH_TSEC1M_IN_GMII |\ | |
445 | HRCWH_TSEC2M_IN_GMII) | |
446 | #endif | |
447 | ||
448 | /* System IO Config */ | |
449 | #define CONFIG_SYS_SICRH 0 | |
450 | #define CONFIG_SYS_SICRL SICRL_LDP_A | |
451 | ||
452 | #define CONFIG_SYS_HID0_INIT 0x000000000 | |
1a2e203b KP |
453 | #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ |
454 | HID0_ENABLE_INSTRUCTION_CACHE) | |
c2e49f70 RA |
455 | |
456 | #define CONFIG_SYS_HID2 HID2_HBE | |
457 | ||
458 | #define CONFIG_SYS_GPIO1_PRELIM | |
459 | #define CONFIG_SYS_GPIO1_DIR 0x00100000 | |
460 | #define CONFIG_SYS_GPIO1_DAT 0x00100000 | |
461 | ||
462 | #define CONFIG_SYS_GPIO2_PRELIM | |
463 | #define CONFIG_SYS_GPIO2_DIR 0x78900000 | |
464 | #define CONFIG_SYS_GPIO2_DAT 0x70100000 | |
465 | ||
466 | #define CONFIG_HIGH_BATS /* High BATs supported */ | |
467 | ||
468 | /* DDR @ 0x00000000 */ | |
469 | #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ | |
470 | BATL_MEMCOHERENCE) | |
471 | #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ | |
472 | BATU_VS | BATU_VP) | |
473 | ||
474 | /* PCI @ 0x80000000 */ | |
475 | #ifdef CONFIG_PCI | |
476 | #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | \ | |
477 | BATL_MEMCOHERENCE) | |
478 | #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ | |
479 | BATU_VS | BATU_VP) | |
480 | #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \ | |
481 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) | |
482 | #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ | |
483 | BATU_VS | BATU_VP) | |
484 | #else | |
485 | #define CONFIG_SYS_IBAT1L (0) | |
486 | #define CONFIG_SYS_IBAT1U (0) | |
487 | #define CONFIG_SYS_IBAT2L (0) | |
488 | #define CONFIG_SYS_IBAT2U (0) | |
489 | #endif | |
490 | ||
491 | #ifdef CONFIG_MPC83XX_PCI2 | |
492 | #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | \ | |
493 | BATL_MEMCOHERENCE) | |
494 | #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \ | |
495 | BATU_VS | BATU_VP) | |
496 | #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | \ | |
497 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) | |
498 | #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \ | |
499 | BATU_VS | BATU_VP) | |
500 | #else | |
501 | #define CONFIG_SYS_IBAT3L (0) | |
502 | #define CONFIG_SYS_IBAT3U (0) | |
503 | #define CONFIG_SYS_IBAT4L (0) | |
504 | #define CONFIG_SYS_IBAT4U (0) | |
505 | #endif | |
506 | ||
507 | /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ | |
508 | #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \ | |
509 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) | |
510 | #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | \ | |
511 | BATU_VS | BATU_VP) | |
512 | ||
513 | #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) | |
514 | #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) | |
515 | ||
516 | #if (CONFIG_SYS_DDR_SIZE == 512) | |
517 | #define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ | |
518 | BATL_PP_10 | BATL_MEMCOHERENCE) | |
519 | #define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ | |
520 | BATU_BL_256M | BATU_VS | BATU_VP) | |
521 | #else | |
522 | #define CONFIG_SYS_IBAT7L (0) | |
523 | #define CONFIG_SYS_IBAT7U (0) | |
524 | #endif | |
525 | ||
526 | #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L | |
527 | #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U | |
528 | #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L | |
529 | #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U | |
530 | #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L | |
531 | #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U | |
532 | #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L | |
533 | #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U | |
534 | #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L | |
535 | #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U | |
536 | #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L | |
537 | #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U | |
538 | #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L | |
539 | #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U | |
540 | #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L | |
541 | #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U | |
542 | ||
c2e49f70 RA |
543 | #if defined(CONFIG_CMD_KGDB) |
544 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ | |
545 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
546 | #endif | |
547 | ||
548 | /* | |
549 | * Environment Configuration | |
550 | */ | |
551 | #define CONFIG_ENV_OVERWRITE | |
552 | ||
553 | #if defined(CONFIG_TSEC_ENET) | |
554 | #define CONFIG_HAS_ETH0 | |
555 | #define CONFIG_HAS_ETH1 | |
556 | #endif | |
557 | ||
558 | #define CONFIG_HOSTNAME VME8349 | |
559 | #define CONFIG_ROOTPATH /tftpboot/rootfs | |
560 | #define CONFIG_BOOTFILE uImage | |
561 | ||
79f516bc | 562 | #define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */ |
c2e49f70 RA |
563 | |
564 | #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ | |
565 | #undef CONFIG_BOOTARGS /* boot command will set bootargs */ | |
566 | ||
1dee9be6 | 567 | #define CONFIG_BAUDRATE 9600 |
c2e49f70 RA |
568 | |
569 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
570 | "netdev=eth0\0" \ | |
571 | "hostname=vme8349\0" \ | |
572 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
573 | "nfsroot=${serverip}:${rootpath}\0" \ | |
574 | "ramargs=setenv bootargs root=/dev/ram rw\0" \ | |
575 | "addip=setenv bootargs ${bootargs} " \ | |
576 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ | |
577 | ":${hostname}:${netdev}:off panic=1\0" \ | |
578 | "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ | |
579 | "flash_nfs=run nfsargs addip addtty;" \ | |
580 | "bootm ${kernel_addr}\0" \ | |
581 | "flash_self=run ramargs addip addtty;" \ | |
582 | "bootm ${kernel_addr} ${ramdisk_addr}\0" \ | |
583 | "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ | |
584 | "bootm\0" \ | |
585 | "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0" \ | |
586 | "update=protect off fff00000 fff3ffff; " \ | |
587 | "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ | |
588 | "upd=run load update\0" \ | |
79f516bc | 589 | "fdtaddr=780000\0" \ |
c2e49f70 RA |
590 | "fdtfile=vme8349.dtb\0" \ |
591 | "" | |
592 | ||
593 | #define CONFIG_NFSBOOTCOMMAND \ | |
594 | "setenv bootargs root=/dev/nfs rw " \ | |
595 | "nfsroot=$serverip:$rootpath " \ | |
596 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
597 | "console=$consoledev,$baudrate $othbootargs;" \ | |
598 | "tftp $loadaddr $bootfile;" \ | |
599 | "tftp $fdtaddr $fdtfile;" \ | |
600 | "bootm $loadaddr - $fdtaddr" | |
601 | ||
602 | #define CONFIG_RAMBOOTCOMMAND \ | |
603 | "setenv bootargs root=/dev/ram rw " \ | |
604 | "console=$consoledev,$baudrate $othbootargs;" \ | |
605 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
606 | "tftp $loadaddr $bootfile;" \ | |
607 | "tftp $fdtaddr $fdtfile;" \ | |
608 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
609 | ||
610 | #define CONFIG_BOOTCOMMAND "run flash_self" | |
611 | ||
1dee9be6 RA |
612 | #ifndef __ASSEMBLY__ |
613 | int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen, | |
614 | unsigned char *buffer, int len); | |
615 | #endif | |
616 | ||
c2e49f70 | 617 | #endif /* __CONFIG_H */ |