include/configs/DU405.h

   1 /*
   2  * (C) Copyright 2001
   3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35 #define CONFIG_IDENT_STRING     " $Name:  $"
  36
  37 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  38 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  39 #define CONFIG_DU405            1       /* ...on a DU405 board          */
  40
  41 #define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()    */
  42 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
  43
  44 #define CONFIG_SYS_CLK_FREQ     25000000 /* external frequency to pll   */
  45
  46 #define CONFIG_BAUDRATE         9600
  47 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds     */
  48
  49 #undef  CONFIG_BOOTARGS
  50 #define CONFIG_BOOTCOMMAND      "bootm fff00000"
  51
  52 #define CONFIG_PREBOOT                  /* enable preboot variable      */
  53
  54 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  55 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
  56
  57 #define CONFIG_MII              1       /* MII PHY management           */
  58 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  59 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
  60
  61 #define CONFIG_COMMANDS       ( CONFIG_CMD_DFL  | \
  62                                 CFG_CMD_PCI     | \
  63                                 CFG_CMD_IRQ     | \
  64                                 CFG_CMD_IDE     | \
  65                                 CFG_CMD_ELF     | \
  66                                 CFG_CMD_MII     | \
  67                                 CFG_CMD_DATE    | \
  68                                 CFG_CMD_EEPROM  )
  69
  70 #define CONFIG_MAC_PARTITION
  71 #define CONFIG_DOS_PARTITION
  72
  73 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
  74 #include <cmd_confdefs.h>
  75
  76 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
  77
  78 #define CONFIG_RTC_MC146818             /* BQ3285 is MC146818 compatible*/
  79 #define CFG_RTC_REG_BASE_ADDR    0xF0000080 /* RTC Base Address         */
  80
  81 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0    */
  82
  83 /*
  84  * Miscellaneous configurable options
  85  */
  86 #define CFG_LONGHELP                    /* undef to save memory         */
  87 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
  88 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
  89 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
  90 #else
  91 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
  92 #endif
  93 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
  94 #define CFG_MAXARGS     16              /* max number of command args   */
  95 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
  96
  97 #define CFG_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
  98
  99 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 100 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 101
 102 #define CFG_EXT_SERIAL_CLOCK    11059200  /* use external serial clock  */
 103
 104 /* The following table includes the supported baudrates */
 105 #define CFG_BAUDRATE_TABLE      \
 106         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 107          57600, 115200, 230400, 460800, 921600 }
 108
 109 #define CFG_LOAD_ADDR   0x100000        /* default load address */
 110 #define CFG_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 111
 112 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 113
 114 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 115
 116 #define CFG_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 117
 118 /*-----------------------------------------------------------------------
 119  * PCI stuff
 120  *-----------------------------------------------------------------------
 121  */
 122 #define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
 123 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 124 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 125
 126 #define CONFIG_PCI                      /* include pci support          */
 127 #define CONFIG_PCI_HOST PCI_HOST_AUTO   /* select pci host function     */
 128 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 129                                         /* resource configuration       */
 130
 131 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 132
 133 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 134
 135 #define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 136 #define CFG_PCI_SUBSYS_DEVICEID 0x0404  /* PCI Device ID: CPCI-ISER4    */
 137 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 138 #define CFG_PCI_PTM1MS  0xff000001      /* 16MB, enable hard-wired to 1 */
 139 #define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 140 #define CFG_PCI_PTM2LA  0xffe00000      /* point to flash               */
 141 #define CFG_PCI_PTM2MS  0xffe00001      /* 2MB, enable                  */
 142 #define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 143
 144 /*-----------------------------------------------------------------------
 145  * IDE/ATA stuff
 146  *-----------------------------------------------------------------------
 147  */
 148 #undef  CONFIG_IDE_8xx_DIRECT           /* no pcmcia interface required */
 149 #undef  CONFIG_IDE_LED                  /* no led for ide supported     */
 150 #undef  CONFIG_IDE_RESET                /* no reset for ide supported   */
 151
 152 #define CFG_IDE_MAXBUS          1               /* max. 1 IDE busses    */
 153 #define CFG_IDE_MAXDEVICE       (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 154
 155 #define CFG_ATA_BASE_ADDR       0xF0100000
 156 #define CFG_ATA_IDE0_OFFSET     0x0000
 157
 158 #define CFG_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O                  */
 159 #define CFG_ATA_REG_OFFSET      0x0000  /* Offset for normal register accesses  */
 160 #define CFG_ATA_ALT_OFFSET      0x0000  /* Offset for alternate registers       */
 161
 162 /*-----------------------------------------------------------------------
 163  * Start addresses for the final memory configuration
 164  * (Set up by the startup code)
 165  * Please note that CFG_SDRAM_BASE _must_ start at 0
 166  */
 167 #define CFG_SDRAM_BASE          0x00000000
 168 #define CFG_FLASH_BASE          0xFFFD0000
 169 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 170 #define CFG_MONITOR_LEN         (192 * 1024)    /* Reserve 192 kB for Monitor   */
 171 #define CFG_MALLOC_LEN          (128 * 1024)    /* Reserve 128 kB for malloc()  */
 172
 173 /*
 174  * For booting Linux, the board info and command line data
 175  * have to be in the first 8 MB of memory, since this is
 176  * the maximum mapped by the Linux kernel during initialization.
 177  */
 178 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 179 /*-----------------------------------------------------------------------
 180  * FLASH organization
 181  */
 182 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks           */
 183 #define CFG_MAX_FLASH_SECT      256     /* max number of sectors on one chip    */
 184
 185 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 186 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 187
 188 #define CFG_FLASH_WORD_SIZE     unsigned short  /* flash word size (width)      */
 189 #define CFG_FLASH_ADDR0         0x5555  /* 1st address for flash config cycles  */
 190 #define CFG_FLASH_ADDR1         0x2AAA  /* 2nd address for flash config cycles  */
 191 /*
 192  * The following defines are added for buggy IOP480 byte interface.
 193  * All other boards should use the standard values (CPCI405 etc.)
 194  */
 195 #define CFG_FLASH_READ0         0x0000  /* 0 is standard                        */
 196 #define CFG_FLASH_READ1         0x0001  /* 1 is standard                        */
 197 #define CFG_FLASH_READ2         0x0002  /* 2 is standard                        */
 198
 199 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 200
 201 /*-----------------------------------------------------------------------
 202  * I2C EEPROM (CAT24WC08) for environment
 203  */
 204 #define CONFIG_HARD_I2C                 /* I2c with hardware support */
 205 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address */
 206 #define CFG_I2C_SLAVE           0x7F
 207
 208 #define CFG_I2C_EEPROM_ADDR     0x50    /* EEPROM CAT28WC08             */
 209 #define CFG_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address             */
 210 /* mask of address bits that overflow into the "EEPROM chip address"    */
 211 #define CFG_I2C_EEPROM_ADDR_OVERFLOW    0x07
 212 #define CFG_EEPROM_PAGE_WRITE_BITS 4    /* The Catalyst CAT24WC08 has   */
 213                                         /* 16 byte page write mode using*/
 214                                         /* last 4 bits of the address   */
 215 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  10   /* and takes up to 10 msec */
 216 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 217
 218 #define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 219 #define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
 220 #define CFG_ENV_SIZE            0x400   /* 1024 bytes may be used for env vars */
 221                                    /* total size of a CAT24WC08 is 1024 bytes */
 222
 223 /*-----------------------------------------------------------------------
 224  * Cache Configuration
 225  */
 226 #define CFG_DCACHE_SIZE         8192    /* For AMCC 405 CPUs                    */
 227 #define CFG_CACHELINE_SIZE      32      /* ...                  */
 228 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 229 #define CFG_CACHELINE_SHIFT     5       /* log base 2 of the above value        */
 230 #endif
 231
 232 /*
 233  * Init Memory Controller:
 234  *
 235  * BR0/1 and OR0/1 (FLASH)
 236  */
 237
 238 #define FLASH_BASE0_PRELIM      0xFF800000      /* FLASH bank #0        */
 239 #define FLASH_BASE1_PRELIM      0xFFC00000      /* FLASH bank #1        */
 240
 241 /*-----------------------------------------------------------------------
 242  * External Bus Controller (EBC) Setup
 243  */
 244
 245 #define FLASH0_BA       0xFFC00000          /* FLASH 0 Base Address             */
 246 #define FLASH1_BA       0xFF800000          /* FLASH 1 Base Address             */
 247 #define CAN_BA          0xF0000000          /* CAN Base Address                 */
 248 #define DUART_BA        0xF0300000          /* DUART Base Address               */
 249 #define CF_BA           0xF0100000          /* CompactFlash Base Address        */
 250 #define SRAM_BA         0xF0200000          /* SRAM Base Address                */
 251 #define DURAG_IO_BA     0xF0400000          /* DURAG Bus IO Base Address        */
 252 #define DURAG_MEM_BA    0xF0500000          /* DURAG Bus Mem Base Address       */
 253
 254 #define FPGA_MODE_REG   (DUART_BA+0x80)     /* FPGA Mode Register               */
 255
 256 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 257 #define CFG_EBC_PB0AP   0x92015480
 258 #define CFG_EBC_PB0CR   FLASH0_BA | 0x5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 259
 260 /* Memory Bank 1 (Flash Bank 1) initialization                                  */
 261 #define CFG_EBC_PB1AP   0x92015480
 262 #define CFG_EBC_PB1CR   FLASH1_BA | 0x5A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 263
 264 /* Memory Bank 2 (CAN0) initialization                                          */
 265 #define CFG_EBC_PB2AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 266 #define CFG_EBC_PB2CR   CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 267
 268 /* Memory Bank 3 (DUART) initialization                                         */
 269 #define CFG_EBC_PB3AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 270 #define CFG_EBC_PB3CR   DUART_BA | 0x18000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
 271
 272 /* Memory Bank 4 (CompactFlash IDE) initialization                              */
 273 #define CFG_EBC_PB4AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 274 #define CFG_EBC_PB4CR   CF_BA | 0x1A000     /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 275
 276 /* Memory Bank 5 (SRAM) initialization                                          */
 277 #define CFG_EBC_PB5AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 278 #define CFG_EBC_PB5CR   SRAM_BA | 0x1A000   /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
 279
 280 /* Memory Bank 6 (DURAG Bus IO Space) initialization                            */
 281 #define CFG_EBC_PB6AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 282 #define CFG_EBC_PB6CR   DURAG_IO_BA | 0x18000 /* BAS=0xF04,BS=1MB,BU=R/W,BW=8bit*/
 283
 284 /* Memory Bank 7 (DURAG Bus Mem Space) initialization                           */
 285 #define CFG_EBC_PB7AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 286 #define CFG_EBC_PB7CR   DURAG_MEM_BA | 0x18000 /* BAS=0xF05,BS=1MB,BU=R/W,BW=8bit */
 287
 288
 289 /*-----------------------------------------------------------------------
 290  * Definitions for initial stack pointer and data area (in DPRAM)
 291  */
 292
 293 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
 294 #define CFG_TEMP_STACK_OCM        1
 295
 296 /* On Chip Memory location */
 297 #define CFG_OCM_DATA_ADDR       0xF8000000
 298 #define CFG_OCM_DATA_SIZE       0x1000
 299
 300 #define CFG_INIT_RAM_ADDR       CFG_OCM_DATA_ADDR /* inside of SDRAM            */
 301 #define CFG_INIT_RAM_END        CFG_OCM_DATA_SIZE /* End of used area in RAM    */
 302 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 303 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 304 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 305
 306
 307 /*
 308  * Internal Definitions
 309  *
 310  * Boot Flags
 311  */
 312 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 313 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 314
 315 #endif  /* __CONFIG_H */