Changes for U-Boot 1.1.4:
======================================================================
+* Cleanup (PPC4xx is AMCC now)
+
* esd CPCI2DP board added
Patch by Matthias Fuchs, 22 Sep 2005
N: Stefan Roese
E: stefan.roese@esd-electronics.com
-D: IBM PPC401/403/405GP Support; Windows environment support
+D: AMCC PPC401/403/405GP Support; Windows environment support
N: Erwin Rol
E: erwin@muffin.org
N: Travis B. Sawyer
E: travis.sawyer@sandburst.com
-D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board. IBM 440gx Ref Platform (Ocotea)
+D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea)
N: Paolo Scaffardi
E: arsenio@tin.it
- mpc85xx Files specific to Freescale MPC85xx CPUs
- nios Files specific to Altera NIOS CPUs
- nios2 Files specific to Altera Nios-II CPUs
- - ppc4xx Files specific to IBM PowerPC 4xx CPUs
+ - ppc4xx Files specific to AMCC PowerPC 4xx CPUs
- pxa Files specific to Intel XScale PXA CPUs
- s3c44b0 Files specific to Samsung S3C44B0 CPUs
- sa1100 Files specific to Intel StrongARM SA1100 CPUs
- Console UART Number:
CONFIG_UART1_CONSOLE
- IBM PPC4xx only.
+ AMCC PPC4xx only.
If defined internal UART1 (and not UART0) is used
as default U-Boot console.
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
- /* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+ /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
#
#
-# IBM 440GX Reference Platform (Ocotea) board
+# AMCC 440GX Reference Platform (Ocotea) board
#
#TEXT_BASE = 0xFFFE0000
case 1:
switch (pvr) {
case PVR_405EP_RB:
- sprintf (info, " IBM PowerPC 405EP Rev. B");
+ sprintf (info, " AMCC PowerPC 405EP Rev. B");
break;
default:
- sprintf (info, " IBM PowerPC 405EP Rev. <unknown>");
+ sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>");
break;
}
return;
#include "eric.h"
#include <asm/processor.h>
-#define IBM405GP_GPIO0_OR 0xef600700 /* GPIO Output */
-#define IBM405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
-#define IBM405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
-#define IBM405GP_GPIO0_IR 0xef60071c /* GPIO Input */
+#define PPC405GP_GPIO0_OR 0xef600700 /* GPIO Output */
+#define PPC405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
+#define PPC405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
+#define PPC405GP_GPIO0_IR 0xef60071c /* GPIO Input */
int board_early_init_f (void)
{
| IRQ 30 (EXT IRQ 5) PCI INTB#; active low; level sensitive
| IRQ 31 (EXT IRQ 6) PCI INTA#; active low; level sensitive
| -> IRQ6 Pin is NOW GPIO23 and can be activateted by setting
- | IBM405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in IBM405GP_GPIO0_OR,
+ | PPC405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in PPC405GP_GPIO0_OR,
| else tristate)
| Note for ERIC board:
| An interrupt taken for the HOST (IRQ 28) indicates that
mtdcr (cntrl0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
- out32 (IBM405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
- out32 (IBM405GP_GPIO0_TCR, 0x7E400000);
+ out32 (PPC405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
+ out32 (PPC405GP_GPIO0_TCR, 0x7E400000);
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-#define IBM_VENDOR_ID 0x1014
-#define PPC405_DEVICE_ID 0x0156
+#define AMCC_VENDOR_ID 0x1014
+#define PPC405_DEVICE_ID 0x0156
/*
u32 addr;
while (bdf >= 0) {
- if ((bdf = pci_find_device(IBM_VENDOR_ID, PPC405_DEVICE_ID, idx++)) < 0) {
+ if ((bdf = pci_find_device(AMCC_VENDOR_ID, PPC405_DEVICE_ID, idx++)) < 0) {
break;
}
printf("Found device nr %d at %x!\n", idx-1, bdf);
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
- /* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+ /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
{ } /* end of device table */
};
/* PPC405 Dummy only used to prevent autosetup on this host bridge */
-static struct pci_pip405_config_entry ibm405_dummy[] = {
+static struct pci_pip405_config_entry ppc405_dummy[] = {
{ } /* end of device table */
};
PCI_DEVICE_ID_IBM_405GP,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID, 0,
- pci_pip405_write_regs, {(unsigned long) ibm405_dummy}},
+ pci_pip405_write_regs, {(unsigned long) ppc405_dummy}},
{PCI_VENDOR_ID_INTEL, /* PIIX4 ISA Bridge Function 0 */
PCI_DEVICE_ID_INTEL_82371AB_0,
dest = (unsigned short *)daddr;
/* Get DCR output register */
- grego = in32(IBM405GP_GPIO0_OR);
+ grego = in32(PPC405GP_GPIO0_OR);
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/* Setup timeout timer */
start = get_timer(0);
/* Wait for FPGA init line */
- while(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
+ while(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
/* Check for timeout - 100us max, so use 3ms */
if (get_timer(start) > 3) {
printf(" failed to start init.\n");
/* Unreset FPGA */
grego |= GPIO_XCV_PROG; /* PROG line high */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/* Wait for FPGA end of init period . */
- while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
+ while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
/* Check for timeout */
if (get_timer(start) > 3) {
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
goto done;
}
mtdcr(CPC0_CR0, greg); /* ... just do it */
/* turn on open drain for CNFG */
- greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */
+ greg = in32(PPC405GP_GPIO0_ODR); /* get open drain register */
greg |= cnfg; /* CNFG open drain */
- out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */
+ out32(PPC405GP_GPIO0_ODR, greg); /* .. just do it */
/* Turn output enable on for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
greg |= cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+ out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */
/* Setup FPGA for programming */
grego &= ~cnfg; /* CONFIG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/*
* Program the FPGA
/* Done programming */
grego |= cnfg; /* CONFIG line high */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
/* Turn output enable OFF for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
greg &= ~cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+ out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */
/* Toggle IRQ/GPIO */
greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
start = get_timer(0);
/* Wait for FPGA end of programming period . */
- while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
+ while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
/* Check for timeout */
if (get_timer(start) > 3) {
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ out32(PPC405GP_GPIO0_OR, grego);
goto done;
}
/*
* Setup GPIO pins - reset devices.
*/
- out32 (IBM405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
- out32 (IBM405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
- out32 (IBM405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
+ out32 (PPC405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
+ out32 (PPC405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
+ out32 (PPC405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
/*
* Setup GPIO pins
*/
- out32 (IBM405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
- out32 (IBM405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
- out32 (IBM405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
+ out32 (PPC405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
+ out32 (PPC405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
+ out32 (PPC405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
#if defined(CONFIG_W7OLMG)
unsigned long greg; /* GPIO Register */
- greg = in32 (IBM405GP_GPIO0_OR);
+ greg = in32 (PPC405GP_GPIO0_OR);
/*
* XXX - Unreset devices - this should be moved into VxWorks driver code
*/
greg |= 0x41800000L; /* SAM, PHY, Galileo */
- out32 (IBM405GP_GPIO0_OR, greg); /* set output pins to default */
+ out32 (PPC405GP_GPIO0_OR, greg); /* set output pins to default */
#endif /* CONFIG_W7OLMG */
/*
#define _W7O_H_
#include <config.h>
-/* IBM 405GP PowerPC GPIO registers */
-#define IBM405GP_GPIO0_OR 0xef600700L /* GPIO Output */
-#define IBM405GP_GPIO0_TCR 0xef600704L /* GPIO Three-State Control */
-#define IBM405GP_GPIO0_ODR 0xef600718L /* GPIO Open Drain */
-#define IBM405GP_GPIO0_IR 0xef60071cL /* GPIO Input */
+/* AMCC 405GP PowerPC GPIO registers */
+#define PPC405GP_GPIO0_OR 0xef600700L /* GPIO Output */
+#define PPC405GP_GPIO0_TCR 0xef600704L /* GPIO Three-State Control */
+#define PPC405GP_GPIO0_ODR 0xef600718L /* GPIO Open Drain */
+#define PPC405GP_GPIO0_IR 0xef60071cL /* GPIO Input */
-/* IBM 405GP DCRs */
+/* AMCC 405GP DCRs */
#define CPC0_CR0 0xb1 /* Chip control register 0 */
/* LMG FPGA <=> CPU GPIO signals */
*/
/*
- * IBM 4XX DCR Functions
+ * AMCC 4XX DCR Functions
*/
#include <common.h>
#if defined(CONFIG_4xx) && (CONFIG_COMMANDS & CFG_CMD_SETGETDCR)
-/* ======================================================================
- * Interpreter command to retrieve an IBM PPC 4xx Device Control Register
- * ======================================================================
+/* =======================================================================
+ * Interpreter command to retrieve an AMCC PPC 4xx Device Control Register
+ * =======================================================================
*/
int do_getdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
{
- unsigned short dcrn; /* Device Control Register Num */
- unsigned long value; /* DCR's value */
+ unsigned short dcrn; /* Device Control Register Num */
+ unsigned long value; /* DCR's value */
- unsigned long get_dcr(unsigned short);
+ unsigned long get_dcr (unsigned short);
- /* Validate arguments */
- if (argc < 2) {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ /* Validate arguments */
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
- /* Get a DCR */
- dcrn = (unsigned short)simple_strtoul(argv[ 1 ], NULL, 16);
- value = get_dcr(dcrn);
+ /* Get a DCR */
+ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16);
+ value = get_dcr (dcrn);
- printf("%04x: %08lx\n", dcrn, value);
+ printf ("%04x: %08lx\n", dcrn, value);
- return 0;
-} /* do_getdcr */
+ return 0;
+}
/* ======================================================================
- * Interpreter command to set an IBM PPC 4xx Device Control Register
+ * Interpreter command to set an AMCC PPC 4xx Device Control Register
* ======================================================================
*/
-int do_setdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_setdcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- unsigned long get_dcr(unsigned short );
- unsigned long set_dcr(unsigned short , unsigned long );
- unsigned short dcrn; /* Device Control Register Num */
- unsigned long value;
- /* DCR's value */
- int nbytes;
- extern char console_buffer[];
-
- /* Validate arguments */
- if (argc < 2) {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- /* Set a DCR */
- dcrn = (unsigned short)simple_strtoul(argv[1], NULL, 16);
- do {
- value = get_dcr(dcrn);
- printf("%04x: %08lx", dcrn, value);
- nbytes = readline(" ? ");
- if (nbytes == 0) {
- /*
- * <CR> pressed as only input, don't modify current
- * location and exit command.
- */
- nbytes = 1;
- return 0;
- } else {
- unsigned long i;
- char *endp;
- i = simple_strtoul(console_buffer, &endp, 16);
- nbytes = endp - console_buffer;
- if (nbytes)
- set_dcr(dcrn, i);
+ unsigned long get_dcr (unsigned short);
+ unsigned long set_dcr (unsigned short, unsigned long);
+ unsigned short dcrn; /* Device Control Register Num */
+ unsigned long value;
+
+ /* DCR's value */
+ int nbytes;
+ extern char console_buffer[];
+
+ /* Validate arguments */
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
}
- } while (nbytes);
- return 0;
-} /* do_setdcr */
+ /* Set a DCR */
+ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16);
+ do {
+ value = get_dcr (dcrn);
+ printf ("%04x: %08lx", dcrn, value);
+ nbytes = readline (" ? ");
+ if (nbytes == 0) {
+ /*
+ * <CR> pressed as only input, don't modify current
+ * location and exit command.
+ */
+ nbytes = 1;
+ return 0;
+ } else {
+ unsigned long i;
+ char *endp;
+
+ i = simple_strtoul (console_buffer, &endp, 16);
+ nbytes = endp - console_buffer;
+ if (nbytes)
+ set_dcr (dcrn, i);
+ }
+ } while (nbytes);
+
+ return 0;
+}
/***************************************************/
U_BOOT_CMD(
getdcr, 2, 1, do_getdcr,
- "getdcr - Get an IBM PPC 4xx DCR's value\n",
+ "getdcr - Get an AMCC PPC 4xx DCR's value\n",
"dcrn - return a DCR's value.\n"
);
U_BOOT_CMD(
setdcr, 2, 1, do_setdcr,
- "setdcr - Set an IBM PPC 4xx DCR's value\n",
+ "setdcr - Set an AMCC PPC 4xx DCR's value\n",
"dcrn - set a DCR's value.\n"
);
#include "vecnum.h"
/*
- * Only compile for platform with IBM/AMCC EMAC ethernet controller and
+ * Only compile for platform with AMCC EMAC ethernet controller and
* network support enabled.
* Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
*/
\f
/* ======================================================================
- * Initialize the global bug_ctx structure for the IBM PPC405. Clear all
+ * Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
* of the breakpoints.
* ====================================================================== */
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
-#error "External serial clock not supported on IBM PPC405EP!"
+#error "External serial clock not supported on AMCC PPC405EP!"
#endif
#define UART_RBR 0x00
*
* (C) Copyright 2002
* Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for IBM 440 based on OpenBIOS draminit.c from IBM.
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
*
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
* This function is reading data from the DIMM module EEPROM over the SPD bus
* and uses that to program the sdram controller.
*
- * This works on boards that has the same schematics that the IBM walnut has.
+ * This works on boards that has the same schematics that the AMCC walnut has.
*
* Input: null for default I2C spd functions or a pointer to a custom function
* returning spd_data.
* This function is reading data from the DIMM module EEPROM over the SPD bus
* and uses that to program the sdram controller.
*
- * This works on boards that has the same schematics that the IBM walnut has.
+ * This works on boards that has the same schematics that the AMCC walnut has.
*
* BUG: Don't handle ECC memory
* BUG: A few values in the TR register is currently hardcoded
/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
/*------------------------------------------------------------------------------- */
-/* U-Boot - Startup Code for IBM 4xx PowerPC based Embedded Boards
+/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
*
*
* The processor starts at 0xfffffffc and the code is executed
Notes
-----
-!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A IBM 4xx BUG!!!
+!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A AMCC 4xx BUG!!!
This reset edge condition could possibly be present in every I2C
controller and device available. For boards where a I2C bus reset
--------------------------
These changes implement the bedbug (emBEDded deBUGger) debugger in U-Boot.
-A specific implementation is made for the IBM405 processor but other flavors
+A specific implementation is made for the AMCC 405 processor but other flavors
can be easily implemented.
#####################
routines are common to all PowerPC processors.
./cpu/ppc4xx/bedbug_405.c
- IBM PPC405 specific debugger routines.
+ AMCC PPC405 specific debugger routines.
Bedbug support for the MPC860
- IBM Ebony Board
+ AMCC Ebony Board
Last Update: September 12, 2002
=======================================================================
-This file contains some handy info regarding U-Boot and the IBM
+This file contains some handy info regarding U-Boot and the AMCC
Ebony evalutation board. See the README.ppc440 for additional
information.
---------------
The Xilinx ML300 board is based on the Virtex-II Pro FPGA with
-integrated IBM PowerPC 405 core. The board is normally booted from
+integrated AMCC PowerPC 405 core. The board is normally booted from
System ACE CF. U-Boot is then run out of main memory.
An FPGA is a configurable and thus very flexible device. To
include/configs/MPC8540ADS.h
include/configs/MPC8560ADS.h
- CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
+ CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc)
CONFIG_E500 BOOKE e500 family(Motorola)
CONFIG_MPC85xx MPC8540,MPC8560 and their derivatives
CONFIG_MPC8540 MPC8540 specific
- IBM Ocotea Board
+ AMCC Ocotea Board
Last Update: March 2, 2004
=======================================================================
-This file contains some handy info regarding U-Boot and the IBM
+This file contains some handy info regarding U-Boot and the AMCC
Ocotea 440gx evalutation board. See the README.ppc440 for additional
information.
This has been done in the 440gx_enet.c file with a #ifdef/endif
pair.
-IBM does not store the EMAC ethernet addresses within their PIBS bootloader.
+AMCC does not store the EMAC ethernet addresses within their PIBS bootloader.
The addresses contained in the config header file are from my particular
board and you _*should*_ change them to reflect your board either in the
config file and/or in your environment variables. I found the addresses on
U-Boot 1.1.3 (Apr 5 2005 - 22:59:57)
-IBM PowerPC 440 GX Rev. C
-Board: IBM 440GX Evaluation Board
+AMCC PowerPC 440 GX Rev. C
+Board: AMCC 440GX Evaluation Board
VCO: 1066 MHz
CPU: 533 MHz
PLB: 152 MHz
405gp code. A sample board support implementation is contained
in the board/ebony directory.
-All testing was performed using the IBM Ebony board using both
+All testing was performed using the AMCC Ebony board using both
Rev B and Rev C silicon. However, since the Rev B. silicon has
extensive errata, support for Rev B. is minimal (it boots, and
features such as i2c, pci, tftpboot, etc. seem to work ok).
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
- /* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+ /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
/*
- * IBM has further subdivided the standard PowerPC 16-bit version and
+ * AMCC has further subdivided the standard PowerPC 16-bit version and
* revision subfields of the PVR for the PowerPC 403s into the following:
*/
#define _MACH_gemini 0x00000200 /* Synergy Microsystems gemini board */
#define _MACH_classic 0x00000400 /* RPCG RPX-Classic 8xx board */
#define _MACH_oak 0x00000800 /* IBM "Oak" 403 eval. board */
-#define _MACH_walnut 0x00001000 /* IBM "Walnut" 405GP eval. board */
+#define _MACH_walnut 0x00001000 /* AMCC "Walnut" 405GP eval. board */
#define _MACH_8260 0x00002000 /* Generic 8260 */
#define _MACH_sandpoint 0x00004000 /* Motorola SPS Processor eval board */
#define _MACH_tqm860 0x00008000 /* TQM860/L */
defined(CONFIG_405EP) || \
defined(CONFIG_440)
unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */
+ unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */
-#define CFG_CACHELINE_SIZE 16 /* For IBM 401/403 CPUs */
+#define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */
-#define CFG_CACHELINE_SIZE 16 /* For IBM 401/403 CPUs */
+#define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405GPr CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 0x4000 /* For IBM 405GPr CPUs */
+#define CFG_DCACHE_SIZE 0x4000 /* For AMCC 405GPr CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
* config for XPedite1000 from XES Inc.
* Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
* (C) Copyright 2003 Sandburst Corporation
- * board/config_EBONY.h - configuration for IBM 440GP Ref (Ebony)
+ * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
***********************************************************************/
#ifndef __CONFIG_H
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 440GX CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 440GX CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EP CPU */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
* Cache configuration
*
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32
* Cache configuration
*
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32
*/
/************************************************************************
- * board/config_EBONY.h - configuration for IBM 440GP Ref (Ebony)
+ * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
***********************************************************************/
#ifndef __CONFIG_H
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
/*-----------------------------------------------------------------------
/************************************************************************
- * OCOTEA.h - configuration for IBM 440GX Ref (Ocotea)
+ * OCOTEA.h - configuration for AMCC 440GX Ref (Ocotea)
***********************************************************************/
#ifndef __CONFIG_H
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
void reset_5xx_watchdog(volatile immap_t *immr);
#endif
-/* IBM 4xx */
+/* AMCC 4xx */
#if defined(CONFIG_4xx) && !defined(__ASSEMBLY__)
void reset_4xx_watchdog(void);
#endif
projects / people / ms / u-boot.git / commitdiff
