include/configs/MPC837XERDB.h

   1 /*
   2  * Copyright (C) 2007 Freescale Semiconductor, Inc.
   3  * Kevin Lam <kevin.lam@freescale.com>
   4  * Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of
   9  * the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  19  * MA 02111-1307 USA
  20  */
  21
  22 #ifndef __CONFIG_H
  23 #define __CONFIG_H
  24
  25 /*
  26  * High Level Configuration Options
  27  */
  28 #define CONFIG_E300             1 /* E300 family */
  29 #define CONFIG_MPC83xx          1 /* MPC83xx family */
  30 #define CONFIG_MPC837x          1 /* MPC837x CPU specific */
  31 #define CONFIG_MPC837XERDB      1
  32
  33 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  34
  35 #define CONFIG_PCI      1
  36
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38 #define CONFIG_MISC_INIT_R
  39 #define CONFIG_HWCONFIG
  40
  41 /*
  42  * On-board devices
  43  */
  44 #define CONFIG_TSEC_ENET                /* TSEC Ethernet support */
  45 #define CONFIG_VSC7385_ENET
  46
  47 /*
  48  * System Clock Setup
  49  */
  50 #ifdef CONFIG_PCISLAVE
  51 #define CONFIG_83XX_PCICLK      66666667 /* in HZ */
  52 #else
  53 #define CONFIG_83XX_CLKIN       66666667 /* in Hz */
  54 #define CONFIG_PCIE
  55 #endif
  56
  57 #ifndef CONFIG_SYS_CLK_FREQ
  58 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
  59 #endif
  60
  61 /*
  62  * Hardware Reset Configuration Word
  63  */
  64 #define CONFIG_SYS_HRCW_LOW (\
  65         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
  66         HRCWL_DDR_TO_SCB_CLK_1X1 |\
  67         HRCWL_SVCOD_DIV_2 |\
  68         HRCWL_CSB_TO_CLKIN_5X1 |\
  69         HRCWL_CORE_TO_CSB_2X1)
  70
  71 #ifdef CONFIG_PCISLAVE
  72 #define CONFIG_SYS_HRCW_HIGH (\
  73         HRCWH_PCI_AGENT |\
  74         HRCWH_PCI1_ARBITER_DISABLE |\
  75         HRCWH_CORE_ENABLE |\
  76         HRCWH_FROM_0XFFF00100 |\
  77         HRCWH_BOOTSEQ_DISABLE |\
  78         HRCWH_SW_WATCHDOG_DISABLE |\
  79         HRCWH_ROM_LOC_LOCAL_16BIT |\
  80         HRCWH_RL_EXT_LEGACY |\
  81         HRCWH_TSEC1M_IN_RGMII |\
  82         HRCWH_TSEC2M_IN_RGMII |\
  83         HRCWH_BIG_ENDIAN |\
  84         HRCWH_LDP_CLEAR)
  85 #else
  86 #define CONFIG_SYS_HRCW_HIGH (\
  87         HRCWH_PCI_HOST |\
  88         HRCWH_PCI1_ARBITER_ENABLE |\
  89         HRCWH_CORE_ENABLE |\
  90         HRCWH_FROM_0X00000100 |\
  91         HRCWH_BOOTSEQ_DISABLE |\
  92         HRCWH_SW_WATCHDOG_DISABLE |\
  93         HRCWH_ROM_LOC_LOCAL_16BIT |\
  94         HRCWH_RL_EXT_LEGACY |\
  95         HRCWH_TSEC1M_IN_RGMII |\
  96         HRCWH_TSEC2M_IN_RGMII |\
  97         HRCWH_BIG_ENDIAN |\
  98         HRCWH_LDP_CLEAR)
  99 #endif
 100
 101 /* System performance - define the value i.e. CONFIG_SYS_XXX
 102 */
 103
 104 /* Arbiter Configuration Register */
 105 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 106 #define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count (0-7) */
 107
 108 /* System Priority Control Regsiter */
 109 #define CONFIG_SYS_SPCR_TSECEP  3       /* eTSEC1&2 emergency priority (0-3) */
 110
 111 /* System Clock Configuration Register */
 112 #define CONFIG_SYS_SCCR_TSEC1CM 1               /* eTSEC1 clock mode (0-3) */
 113 #define CONFIG_SYS_SCCR_TSEC2CM 1               /* eTSEC2 clock mode (0-3) */
 114 #define CONFIG_SYS_SCCR_SATACM  SCCR_SATACM_2   /* SATA1-4 clock mode (0-3) */
 115
 116 /*
 117  * System IO Config
 118  */
 119 #define CONFIG_SYS_SICRH                0x08200000
 120 #define CONFIG_SYS_SICRL                0x00000000
 121
 122 /*
 123  * Output Buffer Impedance
 124  */
 125 #define CONFIG_SYS_OBIR         0x30100000
 126
 127 /*
 128  * IMMR new address
 129  */
 130 #define CONFIG_SYS_IMMR         0xE0000000
 131
 132 /*
 133  * Device configurations
 134  */
 135
 136 /* Vitesse 7385 */
 137
 138 #ifdef CONFIG_VSC7385_ENET
 139
 140 #define CONFIG_TSEC2
 141
 142 /* The flash address and size of the VSC7385 firmware image */
 143 #define CONFIG_VSC7385_IMAGE            0xFE7FE000
 144 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 145
 146 #endif
 147
 148 /*
 149  * DDR Setup
 150  */
 151 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
 152 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 153 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 154 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   0x03000000
 155 #define CONFIG_SYS_83XX_DDR_USES_CS0
 156
 157 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN)
 158
 159 #undef CONFIG_DDR_ECC           /* support DDR ECC function */
 160 #undef CONFIG_DDR_ECC_CMD       /* Use DDR ECC user commands */
 161
 162 #undef CONFIG_NEVER_ASSERT_ODT_TO_CPU   /* Never assert ODT to internal IOs */
 163
 164 /*
 165  * Manually set up DDR parameters
 166  */
 167 #define CONFIG_SYS_DDR_SIZE             256             /* MB */
 168 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000000f
 169 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 170                                         | CSCONFIG_ODT_WR_ONLY_CURRENT \
 171                                         | CSCONFIG_ROW_BIT_13 \
 172                                         | CSCONFIG_COL_BIT_10)
 173
 174 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 175 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
 176                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
 177                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
 178                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
 179                                 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 180                                 | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 181                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 182                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 183                                 /* 0x00260802 */ /* DDR400 */
 184 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 185                                 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 186                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 187                                 | (7 << TIMING_CFG1_CASLAT_SHIFT) \
 188                                 | (13 << TIMING_CFG1_REFREC_SHIFT) \
 189                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
 190                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 191                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
 192                                 /* 0x3937d322 */
 193 #define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
 194                                 | (5 << TIMING_CFG2_CPO_SHIFT) \
 195                                 | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 196                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 197                                 | (3 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 198                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 199                                 | (8 << TIMING_CFG2_FOUR_ACT_SHIFT))
 200                                 /* 0x02984cc8 */
 201
 202 #define CONFIG_SYS_DDR_INTERVAL ((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \
 203                                 | (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 204                                 /* 0x06090100 */
 205
 206 #if defined(CONFIG_DDR_2T_TIMING)
 207 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SREN \
 208                                         | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 209                                         | SDRAM_CFG_32_BE \
 210                                         | SDRAM_CFG_2T_EN)
 211                                         /* 0x43088000 */
 212 #else
 213 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SREN \
 214                                         | SDRAM_CFG_SDRAM_TYPE_DDR2)
 215                                         /* 0x43000000 */
 216 #endif
 217 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00001000 /* 1 posted refresh */
 218 #define CONFIG_SYS_DDR_MODE             ((0x0406 << SDRAM_MODE_ESD_SHIFT) \
 219                                         | (0x0442 << SDRAM_MODE_SD_SHIFT))
 220                                         /* 0x04400442 */ /* DDR400 */
 221 #define CONFIG_SYS_DDR_MODE2            0x00000000
 222
 223 /*
 224  * Memory test
 225  */
 226 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 227 #define CONFIG_SYS_MEMTEST_START        0x00040000 /* memtest region */
 228 #define CONFIG_SYS_MEMTEST_END          0x0ef70010
 229
 230 /*
 231  * The reserved memory
 232  */
 233 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
 234
 235 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 236 #define CONFIG_SYS_RAMBOOT
 237 #else
 238 #undef  CONFIG_SYS_RAMBOOT
 239 #endif
 240
 241 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024) /* Reserve 384 kB for Mon */
 242 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024) /* Reserved for malloc */
 243
 244 /*
 245  * Initial RAM Base Address Setup
 246  */
 247 #define CONFIG_SYS_INIT_RAM_LOCK        1
 248 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
 249 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM */
 250 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 251                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 252
 253 /*
 254  * Local Bus Configuration & Clock Setup
 255  */
 256 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 257 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_8
 258 #define CONFIG_SYS_LBC_LBCR             0x00000000
 259 #define CONFIG_FSL_ELBC         1
 260
 261 /*
 262  * FLASH on the Local Bus
 263  */
 264 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 265 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
 266 #define CONFIG_SYS_FLASH_BASE           0xFE000000 /* FLASH base address */
 267 #define CONFIG_SYS_FLASH_SIZE           8 /* max FLASH size is 32M */
 268
 269 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 270 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* display empty sectors */
 271 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* buffer up multiple bytes */
 272
 273                                         /* Window base at flash base */
 274 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 275 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000016      /* 8 MB window size */
 276
 277 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 278                                 | BR_PS_16      /* 16 bit port */ \
 279                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
 280                                 | BR_V)         /* valid */
 281 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 282                                 | OR_GPCM_XACS \
 283                                 | OR_GPCM_SCY_9 \
 284                                 | OR_GPCM_EHTR_SET \
 285                                 | OR_GPCM_EAD)
 286                                 /* 0xFF800191 */
 287
 288 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* number of banks */
 289 #define CONFIG_SYS_MAX_FLASH_SECT       256 /* max sectors per device */
 290
 291 #undef  CONFIG_SYS_FLASH_CHECKSUM
 292 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 293 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 294
 295 /*
 296  * NAND Flash on the Local Bus
 297  */
 298 #define CONFIG_SYS_NAND_BASE    0xE0600000
 299 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_NAND_BASE \
 300                                 | BR_DECC_CHK_GEN       /* Use HW ECC */ \
 301                                 | BR_PS_8               /* 8 bit port */ \
 302                                 | BR_MS_FCM             /* MSEL = FCM */ \
 303                                 | BR_V)                 /* valid */
 304 #define CONFIG_SYS_OR1_PRELIM   (OR_AM_32KB \
 305                                 | OR_FCM_CSCT \
 306                                 | OR_FCM_CST \
 307                                 | OR_FCM_CHT \
 308                                 | OR_FCM_SCY_1 \
 309                                 | OR_FCM_TRLX \
 310                                 | OR_FCM_EHTR)
 311 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 312 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 313
 314 /* Vitesse 7385 */
 315
 316 #define CONFIG_SYS_VSC7385_BASE 0xF0000000
 317
 318 #ifdef CONFIG_VSC7385_ENET
 319
 320 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_VSC7385_BASE \
 321                                         | BR_PS_8 \
 322                                         | BR_MS_GPCM \
 323                                         | BR_V)
 324                                         /* 0xF0000801 */
 325 #define CONFIG_SYS_OR2_PRELIM           (OR_AM_128KB \
 326                                         | OR_GPCM_CSNT \
 327                                         | OR_GPCM_XACS \
 328                                         | OR_GPCM_SCY_15 \
 329                                         | OR_GPCM_SETA \
 330                                         | OR_GPCM_TRLX_SET \
 331                                         | OR_GPCM_EHTR_SET \
 332                                         | OR_GPCM_EAD)
 333                                         /* 0xfffe09ff */
 334
 335                                         /* Access Base */
 336 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_VSC7385_BASE
 337 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_128KB)
 338
 339 #endif
 340
 341 /*
 342  * Serial Port
 343  */
 344 #define CONFIG_CONS_INDEX       1
 345 #define CONFIG_SYS_NS16550
 346 #define CONFIG_SYS_NS16550_SERIAL
 347 #define CONFIG_SYS_NS16550_REG_SIZE     1
 348 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 349
 350 #define CONFIG_SYS_BAUDRATE_TABLE \
 351                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 352
 353 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 354 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 355
 356 /* SERDES */
 357 #define CONFIG_FSL_SERDES
 358 #define CONFIG_FSL_SERDES1      0xe3000
 359 #define CONFIG_FSL_SERDES2      0xe3100
 360
 361 /* Use the HUSH parser */
 362 #define CONFIG_SYS_HUSH_PARSER
 363
 364 /* Pass open firmware flat tree */
 365 #define CONFIG_OF_LIBFDT        1
 366 #define CONFIG_OF_BOARD_SETUP   1
 367 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
 368
 369 /* I2C */
 370 #define CONFIG_SYS_I2C
 371 #define CONFIG_SYS_I2C_FSL
 372 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 373 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 374 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 375 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x51} }
 376
 377 /*
 378  * Config on-board RTC
 379  */
 380 #define CONFIG_RTC_DS1374       /* use ds1374 rtc via i2c */
 381 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
 382
 383 /*
 384  * General PCI
 385  * Addresses are mapped 1-1.
 386  */
 387 #define CONFIG_SYS_PCI_MEM_BASE         0x80000000
 388 #define CONFIG_SYS_PCI_MEM_PHYS         CONFIG_SYS_PCI_MEM_BASE
 389 #define CONFIG_SYS_PCI_MEM_SIZE         0x10000000 /* 256M */
 390 #define CONFIG_SYS_PCI_MMIO_BASE        0x90000000
 391 #define CONFIG_SYS_PCI_MMIO_PHYS        CONFIG_SYS_PCI_MMIO_BASE
 392 #define CONFIG_SYS_PCI_MMIO_SIZE        0x10000000 /* 256M */
 393 #define CONFIG_SYS_PCI_IO_BASE          0x00000000
 394 #define CONFIG_SYS_PCI_IO_PHYS          0xE0300000
 395 #define CONFIG_SYS_PCI_IO_SIZE          0x100000 /* 1M */
 396
 397 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 398 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 399 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 400
 401 #define CONFIG_SYS_PCIE1_BASE           0xA0000000
 402 #define CONFIG_SYS_PCIE1_CFG_BASE       0xA0000000
 403 #define CONFIG_SYS_PCIE1_CFG_SIZE       0x08000000
 404 #define CONFIG_SYS_PCIE1_MEM_BASE       0xA8000000
 405 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xA8000000
 406 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000
 407 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
 408 #define CONFIG_SYS_PCIE1_IO_PHYS        0xB8000000
 409 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000
 410
 411 #define CONFIG_SYS_PCIE2_BASE           0xC0000000
 412 #define CONFIG_SYS_PCIE2_CFG_BASE       0xC0000000
 413 #define CONFIG_SYS_PCIE2_CFG_SIZE       0x08000000
 414 #define CONFIG_SYS_PCIE2_MEM_BASE       0xC8000000
 415 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xC8000000
 416 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000
 417 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
 418 #define CONFIG_SYS_PCIE2_IO_PHYS        0xD8000000
 419 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000
 420
 421 #ifdef CONFIG_PCI
 422 #define CONFIG_PCI_INDIRECT_BRIDGE
 423 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 424
 425 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 426 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
 427 #endif  /* CONFIG_PCI */
 428
 429 /*
 430  * TSEC
 431  */
 432 #ifdef CONFIG_TSEC_ENET
 433
 434 #define CONFIG_GMII                     /* MII PHY management */
 435
 436 #define CONFIG_TSEC1
 437
 438 #ifdef CONFIG_TSEC1
 439 #define CONFIG_HAS_ETH0
 440 #define CONFIG_TSEC1_NAME               "TSEC0"
 441 #define CONFIG_SYS_TSEC1_OFFSET         0x24000
 442 #define TSEC1_PHY_ADDR                  2
 443 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 444 #define TSEC1_PHYIDX                    0
 445 #endif
 446
 447 #ifdef CONFIG_TSEC2
 448 #define CONFIG_HAS_ETH1
 449 #define CONFIG_TSEC2_NAME               "TSEC1"
 450 #define CONFIG_SYS_TSEC2_OFFSET         0x25000
 451 #define TSEC2_PHY_ADDR                  0x1c
 452 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 453 #define TSEC2_PHYIDX                    0
 454 #endif
 455
 456 /* Options are: TSEC[0-1] */
 457 #define CONFIG_ETHPRIME                 "TSEC0"
 458
 459 #endif
 460
 461 /*
 462  * SATA
 463  */
 464 #define CONFIG_LIBATA
 465 #define CONFIG_FSL_SATA
 466
 467 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 468 #define CONFIG_SATA1
 469 #define CONFIG_SYS_SATA1_OFFSET 0x18000
 470 #define CONFIG_SYS_SATA1        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
 471 #define CONFIG_SYS_SATA1_FLAGS  FLAGS_DMA
 472 #define CONFIG_SATA2
 473 #define CONFIG_SYS_SATA2_OFFSET 0x19000
 474 #define CONFIG_SYS_SATA2        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
 475 #define CONFIG_SYS_SATA2_FLAGS  FLAGS_DMA
 476
 477 #ifdef CONFIG_FSL_SATA
 478 #define CONFIG_LBA48
 479 #define CONFIG_CMD_SATA
 480 #define CONFIG_DOS_PARTITION
 481 #define CONFIG_CMD_EXT2
 482 #endif
 483
 484 /*
 485  * Environment
 486  */
 487 #ifndef CONFIG_SYS_RAMBOOT
 488         #define CONFIG_ENV_IS_IN_FLASH  1
 489         #define CONFIG_ENV_ADDR         \
 490                         (CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
 491         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K (one sector) for env */
 492         #define CONFIG_ENV_SIZE         0x4000
 493 #else
 494         #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
 495         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 496         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-0x1000)
 497         #define CONFIG_ENV_SIZE         0x2000
 498 #endif
 499
 500 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 501 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 502
 503 /*
 504  * BOOTP options
 505  */
 506 #define CONFIG_BOOTP_BOOTFILESIZE
 507 #define CONFIG_BOOTP_BOOTPATH
 508 #define CONFIG_BOOTP_GATEWAY
 509 #define CONFIG_BOOTP_HOSTNAME
 510
 511
 512 /*
 513  * Command line configuration.
 514  */
 515 #include <config_cmd_default.h>
 516
 517 #define CONFIG_CMD_PING
 518 #define CONFIG_CMD_I2C
 519 #define CONFIG_CMD_MII
 520 #define CONFIG_CMD_DATE
 521
 522 #if defined(CONFIG_PCI)
 523 #define CONFIG_CMD_PCI
 524 #endif
 525
 526 #if defined(CONFIG_SYS_RAMBOOT)
 527 #undef CONFIG_CMD_SAVEENV
 528 #undef CONFIG_CMD_LOADS
 529 #endif
 530
 531 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
 532 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 533
 534 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 535
 536 #define CONFIG_MMC     1
 537
 538 #ifdef CONFIG_MMC
 539 #define CONFIG_FSL_ESDHC
 540 #define CONFIG_FSL_ESDHC_PIN_MUX
 541 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC83xx_ESDHC_ADDR
 542 #define CONFIG_CMD_MMC
 543 #define CONFIG_GENERIC_MMC
 544 #define CONFIG_CMD_EXT2
 545 #define CONFIG_CMD_FAT
 546 #define CONFIG_DOS_PARTITION
 547 #endif
 548
 549 /*
 550  * Miscellaneous configurable options
 551  */
 552 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 553 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 554 #define CONFIG_SYS_PROMPT       "=> "   /* Monitor Command Prompt */
 555
 556 #if defined(CONFIG_CMD_KGDB)
 557         #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 558 #else
 559         #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
 560 #endif
 561
 562                                 /* Print Buffer Size */
 563 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 564 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 565                                 /* Boot Argument Buffer Size */
 566 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 567 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks */
 568
 569 /*
 570  * For booting Linux, the board info and command line data
 571  * have to be in the first 256 MB of memory, since this is
 572  * the maximum mapped by the Linux kernel during initialization.
 573  */
 574 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20) /* Initial Memory map for Linux */
 575
 576 /*
 577  * Core HID Setup
 578  */
 579 #define CONFIG_SYS_HID0_INIT    0x000000000
 580 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK \
 581                                 | HID0_ENABLE_INSTRUCTION_CACHE)
 582 #define CONFIG_SYS_HID2         HID2_HBE
 583
 584 /*
 585  * MMU Setup
 586  */
 587
 588 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 589
 590 /* DDR: cache cacheable */
 591 #define CONFIG_SYS_SDRAM_LOWER          CONFIG_SYS_SDRAM_BASE
 592 #define CONFIG_SYS_SDRAM_UPPER          (CONFIG_SYS_SDRAM_BASE + 0x10000000)
 593
 594 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_LOWER \
 595                                 | BATL_PP_RW \
 596                                 | BATL_MEMCOHERENCE)
 597 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_LOWER \
 598                                 | BATU_BL_256M \
 599                                 | BATU_VS \
 600                                 | BATU_VP)
 601 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 602 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 603
 604 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_SDRAM_UPPER \
 605                                 | BATL_PP_RW \
 606                                 | BATL_MEMCOHERENCE)
 607 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_SDRAM_UPPER \
 608                                 | BATU_BL_256M \
 609                                 | BATU_VS \
 610                                 | BATU_VP)
 611 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 612 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 613
 614 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
 615 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_IMMR \
 616                                 | BATL_PP_RW \
 617                                 | BATL_CACHEINHIBIT \
 618                                 | BATL_GUARDEDSTORAGE)
 619 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_IMMR \
 620                                 | BATU_BL_8M \
 621                                 | BATU_VS \
 622                                 | BATU_VP)
 623 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 624 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 625
 626 /* L2 Switch: cache-inhibit and guarded */
 627 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_VSC7385_BASE \
 628                                 | BATL_PP_RW \
 629                                 | BATL_CACHEINHIBIT \
 630                                 | BATL_GUARDEDSTORAGE)
 631 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_VSC7385_BASE \
 632                                 | BATU_BL_128K \
 633                                 | BATU_VS \
 634                                 | BATU_VP)
 635 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 636 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 637
 638 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 639 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_FLASH_BASE \
 640                                 | BATL_PP_RW \
 641                                 | BATL_MEMCOHERENCE)
 642 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_FLASH_BASE \
 643                                 | BATU_BL_32M \
 644                                 | BATU_VS \
 645                                 | BATU_VP)
 646 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_FLASH_BASE \
 647                                 | BATL_PP_RW \
 648                                 | BATL_CACHEINHIBIT \
 649                                 | BATL_GUARDEDSTORAGE)
 650 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 651
 652 /* Stack in dcache: cacheable, no memory coherence */
 653 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
 654 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_INIT_RAM_ADDR \
 655                                 | BATU_BL_128K \
 656                                 | BATU_VS \
 657                                 | BATU_VP)
 658 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 659 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 660
 661 #ifdef CONFIG_PCI
 662 /* PCI MEM space: cacheable */
 663 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_PCI_MEM_PHYS \
 664                                 | BATL_PP_RW \
 665                                 | BATL_MEMCOHERENCE)
 666 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_PCI_MEM_PHYS \
 667                                 | BATU_BL_256M \
 668                                 | BATU_VS \
 669                                 | BATU_VP)
 670 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 671 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 672 /* PCI MMIO space: cache-inhibit and guarded */
 673 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_PCI_MMIO_PHYS \
 674                                 | BATL_PP_RW \
 675                                 | BATL_CACHEINHIBIT \
 676                                 | BATL_GUARDEDSTORAGE)
 677 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_PCI_MMIO_PHYS \
 678                                 | BATU_BL_256M \
 679                                 | BATU_VS \
 680                                 | BATU_VP)
 681 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 682 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 683 #else
 684 #define CONFIG_SYS_IBAT6L       (0)
 685 #define CONFIG_SYS_IBAT6U       (0)
 686 #define CONFIG_SYS_IBAT7L       (0)
 687 #define CONFIG_SYS_IBAT7U       (0)
 688 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 689 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 690 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 691 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 692 #endif
 693
 694 #if defined(CONFIG_CMD_KGDB)
 695 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 696 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 697 #endif
 698
 699 /*
 700  * Environment Configuration
 701  */
 702 #define CONFIG_ENV_OVERWRITE
 703
 704 #define CONFIG_HAS_FSL_DR_USB
 705
 706 #define CONFIG_NETDEV           "eth1"
 707
 708 #define CONFIG_HOSTNAME         mpc837x_rdb
 709 #define CONFIG_ROOTPATH         "/nfsroot"
 710 #define CONFIG_RAMDISKFILE      "rootfs.ext2.gz.uboot"
 711 #define CONFIG_BOOTFILE         "uImage"
 712                                 /* U-Boot image on TFTP server */
 713 #define CONFIG_UBOOTPATH        "u-boot.bin"
 714 #define CONFIG_FDTFILE          "mpc8379_rdb.dtb"
 715
 716                                 /* default location for tftp and bootm */
 717 #define CONFIG_LOADADDR         800000
 718 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 719 #define CONFIG_BAUDRATE         115200
 720
 721 #define CONFIG_EXTRA_ENV_SETTINGS \
 722         "netdev=" CONFIG_NETDEV "\0"                            \
 723         "uboot=" CONFIG_UBOOTPATH "\0"                                  \
 724         "tftpflash=tftp $loadaddr $uboot;"                              \
 725                 "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 726                         " +$filesize; " \
 727                 "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 728                         " +$filesize; " \
 729                 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 730                         " $filesize; "  \
 731                 "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 732                         " +$filesize; " \
 733                 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 734                         " $filesize\0"  \
 735         "fdtaddr=780000\0"                                              \
 736         "fdtfile=" CONFIG_FDTFILE "\0"                                  \
 737         "ramdiskaddr=1000000\0"                                         \
 738         "ramdiskfile=" CONFIG_RAMDISKFILE "\0"                          \
 739         "console=ttyS0\0"                                               \
 740         "setbootargs=setenv bootargs "                                  \
 741                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
 742         "setipargs=setenv bootargs nfsroot=$serverip:$rootpath "        \
 743                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 744                                                         "$netdev:off "  \
 745                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
 746
 747 #define CONFIG_NFSBOOTCOMMAND                                           \
 748         "setenv rootdev /dev/nfs;"                                      \
 749         "run setbootargs;"                                              \
 750         "run setipargs;"                                                \
 751         "tftp $loadaddr $bootfile;"                                     \
 752         "tftp $fdtaddr $fdtfile;"                                       \
 753         "bootm $loadaddr - $fdtaddr"
 754
 755 #define CONFIG_RAMBOOTCOMMAND                                           \
 756         "setenv rootdev /dev/ram;"                                      \
 757         "run setbootargs;"                                              \
 758         "tftp $ramdiskaddr $ramdiskfile;"                               \
 759         "tftp $loadaddr $bootfile;"                                     \
 760         "tftp $fdtaddr $fdtfile;"                                       \
 761         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 762
 763 #endif  /* __CONFIG_H */