include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_PHYS_64BIT
  15 #define CONFIG_DISPLAY_BOARDINFO
  16
  17 #define CONFIG_FSL_SATA_V2
  18 #define CONFIG_PCIE4
  19
  20 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  21
  22 #ifdef CONFIG_RAMBOOT_PBL
  23 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  24 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  25 #ifndef CONFIG_SDCARD
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #else
  29 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  30 #define CONFIG_SPL_ENV_SUPPORT
  31 #define CONFIG_SPL_SERIAL_SUPPORT
  32 #define CONFIG_SPL_FLUSH_IMAGE
  33 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  34 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  35 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  36 #define CONFIG_SPL_I2C_SUPPORT
  37 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  38 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  39 #define CONFIG_SYS_TEXT_BASE            0x00201000
  40 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  41 #define CONFIG_SPL_PAD_TO               0x40000
  42 #define CONFIG_SPL_MAX_SIZE             0x28000
  43 #define RESET_VECTOR_OFFSET             0x27FFC
  44 #define BOOT_PAGE_OFFSET                0x27000
  45
  46 #ifdef  CONFIG_SDCARD
  47 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  48 #define CONFIG_SPL_MMC_SUPPORT
  49 #define CONFIG_SPL_MMC_MINIMAL
  50 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  51 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  52 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  53 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  54 #ifndef CONFIG_SPL_BUILD
  55 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  56 #endif
  57 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  58 #define CONFIG_SPL_MMC_BOOT
  59 #endif
  60
  61 #ifdef CONFIG_SPL_BUILD
  62 #define CONFIG_SPL_SKIP_RELOCATE
  63 #define CONFIG_SPL_COMMON_INIT_DDR
  64 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  65 #define CONFIG_SYS_NO_FLASH
  66 #endif
  67
  68 #endif
  69 #endif /* CONFIG_RAMBOOT_PBL */
  70
  71 #define CONFIG_DDR_ECC
  72
  73 #define CONFIG_CMD_REGINFO
  74
  75 /* High Level Configuration Options */
  76 #define CONFIG_BOOKE
  77 #define CONFIG_E500                     /* BOOKE e500 family */
  78 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  79 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  80 #define CONFIG_MP                       /* support multiple processors */
  81
  82 #ifndef CONFIG_SYS_TEXT_BASE
  83 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  84 #endif
  85
  86 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  87 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  88 #endif
  89
  90 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  91 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  92 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  93 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  94 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  95 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  96 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  97 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  98 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  99 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 100
 101 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 102
 103 #define CONFIG_ENV_OVERWRITE
 104
 105 /*
 106  * These can be toggled for performance analysis, otherwise use default.
 107  */
 108 #define CONFIG_SYS_CACHE_STASHING
 109 #define CONFIG_BTB                      /* toggle branch predition */
 110 #ifdef CONFIG_DDR_ECC
 111 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 112 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 113 #endif
 114
 115 #define CONFIG_ENABLE_36BIT_PHYS
 116
 117 #define CONFIG_ADDR_MAP
 118 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 119
 120 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 121 #define CONFIG_SYS_MEMTEST_END          0x00400000
 122 #define CONFIG_SYS_ALT_MEMTEST
 123 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 124
 125 /*
 126  *  Config the L3 Cache as L3 SRAM
 127  */
 128 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 129 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 130 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 131 #ifdef CONFIG_RAMBOOT_PBL
 132 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 133 #endif
 134 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 135 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 136 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 137 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 138
 139 #define CONFIG_SYS_DCSRBAR              0xf0000000
 140 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 141
 142 /*
 143  * DDR Setup
 144  */
 145 #define CONFIG_VERY_BIG_RAM
 146 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 147 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 148
 149 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 150 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 151 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 152 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 153
 154 #define CONFIG_DDR_SPD
 155 #define CONFIG_SYS_FSL_DDR3
 156
 157
 158 /*
 159  * IFC Definitions
 160  */
 161 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 162 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 163
 164
 165 #ifdef CONFIG_SPL_BUILD
 166 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 167 #else
 168 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 169 #endif
 170
 171 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 172 #define CONFIG_MISC_INIT_R
 173
 174 #define CONFIG_HWCONFIG
 175
 176 /* define to use L1 as initial stack */
 177 #define CONFIG_L1_INIT_RAM
 178 #define CONFIG_SYS_INIT_RAM_LOCK
 179 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 180 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 182 /* The assembler doesn't like typecast */
 183 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 184         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 185           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 186 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 187
 188 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 189                                         GENERATED_GBL_DATA_SIZE)
 190 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 191
 192 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 193 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 194
 195 /* Serial Port - controlled on board with jumper J8
 196  * open - index 2
 197  * shorted - index 1
 198  */
 199 #define CONFIG_CONS_INDEX       1
 200 #define CONFIG_SYS_NS16550_SERIAL
 201 #define CONFIG_SYS_NS16550_REG_SIZE     1
 202 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 203
 204 #define CONFIG_SYS_BAUDRATE_TABLE       \
 205         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 206
 207 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 208 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 209 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 210 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 211
 212 /* I2C */
 213 #define CONFIG_SYS_I2C
 214 #define CONFIG_SYS_I2C_FSL
 215 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 216 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 217 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 218 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 219
 220 /*
 221  * General PCI
 222  * Memory space is mapped 1-1, but I/O space must start from 0.
 223  */
 224
 225 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 226 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 227 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 228 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 229 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 230 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 231 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 232 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 233 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 234
 235 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 236 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 237 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 238 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 239 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 240 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 241 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 242 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 243 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 244
 245 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 246 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 247 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 248 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 249 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 250 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 251 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 252 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 253 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 254
 255 /* controller 4, Base address 203000 */
 256 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 257 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 258 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 259 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 260 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 261 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 262
 263 #ifdef CONFIG_PCI
 264 #define CONFIG_PCI_INDIRECT_BRIDGE
 265 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 266
 267 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 268 #define CONFIG_DOS_PARTITION
 269 #endif  /* CONFIG_PCI */
 270
 271 /* SATA */
 272 #ifdef CONFIG_FSL_SATA_V2
 273 #define CONFIG_LIBATA
 274 #define CONFIG_FSL_SATA
 275
 276 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 277 #define CONFIG_SATA1
 278 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 279 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 280 #define CONFIG_SATA2
 281 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 282 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 283
 284 #define CONFIG_LBA48
 285 #define CONFIG_CMD_SATA
 286 #define CONFIG_DOS_PARTITION
 287 #define CONFIG_CMD_EXT2
 288 #endif
 289
 290 #ifdef CONFIG_FMAN_ENET
 291 #define CONFIG_MII              /* MII PHY management */
 292 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 293 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 294 #endif
 295
 296 /*
 297  * Environment
 298  */
 299 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 300 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 301
 302 /*
 303  * Command line configuration.
 304  */
 305 #define CONFIG_CMD_DHCP
 306 #define CONFIG_CMD_ERRATA
 307 #define CONFIG_CMD_GREPENV
 308 #define CONFIG_CMD_IRQ
 309 #define CONFIG_CMD_I2C
 310 #define CONFIG_CMD_MII
 311 #define CONFIG_CMD_PING
 312
 313 #ifdef CONFIG_PCI
 314 #define CONFIG_CMD_PCI
 315 #endif
 316
 317 /*
 318  * Miscellaneous configurable options
 319  */
 320 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 321 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 322 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 323 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 324 #ifdef CONFIG_CMD_KGDB
 325 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 326 #else
 327 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 328 #endif
 329 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 330 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 331 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 332
 333 /*
 334  * For booting Linux, the board info and command line data
 335  * have to be in the first 64 MB of memory, since this is
 336  * the maximum mapped by the Linux kernel during initialization.
 337  */
 338 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 339 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 340
 341 #ifdef CONFIG_CMD_KGDB
 342 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 343 #endif
 344
 345 /*
 346  * Environment Configuration
 347  */
 348 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 349 #define CONFIG_BOOTFILE         "uImage"
 350 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 351
 352 /* default location for tftp and bootm */
 353 #define CONFIG_LOADADDR         1000000
 354
 355
 356 #define CONFIG_BAUDRATE 115200
 357
 358 #define CONFIG_HVBOOT                                   \
 359         "setenv bootargs config-addr=0x60000000; "      \
 360         "bootm 0x01000000 - 0x00f00000"
 361
 362 #ifdef CONFIG_SYS_NO_FLASH
 363 #ifndef CONFIG_RAMBOOT_PBL
 364 #define CONFIG_ENV_IS_NOWHERE
 365 #endif
 366 #else
 367 #define CONFIG_FLASH_CFI_DRIVER
 368 #define CONFIG_SYS_FLASH_CFI
 369 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 370 #endif
 371
 372 #if defined(CONFIG_SPIFLASH)
 373 #define CONFIG_SYS_EXTRA_ENV_RELOC
 374 #define CONFIG_ENV_IS_IN_SPI_FLASH
 375 #define CONFIG_ENV_SPI_BUS              0
 376 #define CONFIG_ENV_SPI_CS               0
 377 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 378 #define CONFIG_ENV_SPI_MODE             0
 379 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 380 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 381 #define CONFIG_ENV_SECT_SIZE            0x10000
 382 #elif defined(CONFIG_SDCARD)
 383 #define CONFIG_SYS_EXTRA_ENV_RELOC
 384 #define CONFIG_ENV_IS_IN_MMC
 385 #define CONFIG_SYS_MMC_ENV_DEV          0
 386 #define CONFIG_ENV_SIZE                 0x2000
 387 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 388 #elif defined(CONFIG_NAND)
 389 #define CONFIG_SYS_EXTRA_ENV_RELOC
 390 #define CONFIG_ENV_IS_IN_NAND
 391 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 392 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 393 #elif defined(CONFIG_ENV_IS_NOWHERE)
 394 #define CONFIG_ENV_SIZE         0x2000
 395 #else
 396 #define CONFIG_ENV_IS_IN_FLASH
 397 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 398 #define CONFIG_ENV_SIZE         0x2000
 399 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 400 #endif
 401
 402 #define CONFIG_SYS_CLK_FREQ     66666666
 403 #define CONFIG_DDR_CLK_FREQ     133333333
 404
 405 #ifndef __ASSEMBLY__
 406 unsigned long get_board_sys_clk(void);
 407 unsigned long get_board_ddr_clk(void);
 408 #endif
 409
 410 /*
 411  * DDR Setup
 412  */
 413 #define CONFIG_SYS_SPD_BUS_NUM  0
 414 #define SPD_EEPROM_ADDRESS1     0x52
 415 #define SPD_EEPROM_ADDRESS2     0x54
 416 #define SPD_EEPROM_ADDRESS3     0x56
 417 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 418 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 419
 420 /*
 421  * IFC Definitions
 422  */
 423 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 424 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 425                                 + 0x8000000) | \
 426                                 CSPR_PORT_SIZE_16 | \
 427                                 CSPR_MSEL_NOR | \
 428                                 CSPR_V)
 429 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 430 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 431                                 CSPR_PORT_SIZE_16 | \
 432                                 CSPR_MSEL_NOR | \
 433                                 CSPR_V)
 434 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 435 /* NOR Flash Timing Params */
 436 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 437
 438 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 439                                 FTIM0_NOR_TEADC(0x5) | \
 440                                 FTIM0_NOR_TEAHC(0x5))
 441 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 442                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 443                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 444 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 445                                 FTIM2_NOR_TCH(0x4) | \
 446                                 FTIM2_NOR_TWPH(0x0E) | \
 447                                 FTIM2_NOR_TWP(0x1c))
 448 #define CONFIG_SYS_NOR_FTIM3    0x0
 449
 450 #define CONFIG_SYS_FLASH_QUIET_TEST
 451 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 452
 453 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 454 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 455 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 456 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 457
 458 #define CONFIG_SYS_FLASH_EMPTY_INFO
 459 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 460                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 461
 462 /* NAND Flash on IFC */
 463 #define CONFIG_NAND_FSL_IFC
 464 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 465 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 466 #define CONFIG_SYS_NAND_BASE            0xff800000
 467 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 468
 469 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 470 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 471                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 472                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 473                                 | CSPR_V)
 474 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 475
 476 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 477                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 478                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 479                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 480                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 481                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 482                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 483
 484 #define CONFIG_SYS_NAND_ONFI_DETECTION
 485
 486 /* ONFI NAND Flash mode0 Timing Params */
 487 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 488                                         FTIM0_NAND_TWP(0x18)   | \
 489                                         FTIM0_NAND_TWCHT(0x07) | \
 490                                         FTIM0_NAND_TWH(0x0a))
 491 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 492                                         FTIM1_NAND_TWBE(0x39)  | \
 493                                         FTIM1_NAND_TRR(0x0e)   | \
 494                                         FTIM1_NAND_TRP(0x18))
 495 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 496                                         FTIM2_NAND_TREH(0x0a) | \
 497                                         FTIM2_NAND_TWHRE(0x1e))
 498 #define CONFIG_SYS_NAND_FTIM3           0x0
 499
 500 #define CONFIG_SYS_NAND_DDR_LAW         11
 501 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 502 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 503 #define CONFIG_CMD_NAND
 504
 505 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 506
 507 #if defined(CONFIG_NAND)
 508 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 509 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 510 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 511 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 512 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 513 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 514 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 515 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 516 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 517 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 518 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 519 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 520 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 521 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 522 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 523 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 524 #else
 525 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 526 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 527 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 528 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 529 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 530 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 531 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 532 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 533 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 534 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 535 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 536 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 537 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 538 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 539 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 540 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 541 #endif
 542 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 543 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 544 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 545 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 546 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 547 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 548 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 549 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 550
 551 /* CPLD on IFC */
 552 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 553 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 554 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 555 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 556                                 | CSPR_PORT_SIZE_8 \
 557                                 | CSPR_MSEL_GPCM \
 558                                 | CSPR_V)
 559
 560 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 561 #define CONFIG_SYS_CSOR3        0x0
 562
 563 /* CPLD Timing parameters for IFC CS3 */
 564 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 565                                         FTIM0_GPCM_TEADC(0x0e) | \
 566                                         FTIM0_GPCM_TEAHC(0x0e))
 567 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 568                                         FTIM1_GPCM_TRAD(0x1f))
 569 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 570                                         FTIM2_GPCM_TCH(0x8) | \
 571                                         FTIM2_GPCM_TWP(0x1f))
 572 #define CONFIG_SYS_CS3_FTIM3            0x0
 573
 574 #if defined(CONFIG_RAMBOOT_PBL)
 575 #define CONFIG_SYS_RAMBOOT
 576 #endif
 577
 578
 579 /* I2C */
 580 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 581 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 582 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 583 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 584
 585 #define I2C_MUX_CH_DEFAULT      0x8
 586 #define I2C_MUX_CH_VOL_MONITOR  0xa
 587 #define I2C_MUX_CH_VSC3316_FS   0xc
 588 #define I2C_MUX_CH_VSC3316_BS   0xd
 589
 590 /* Voltage monitor on channel 2*/
 591 #define I2C_VOL_MONITOR_ADDR            0x40
 592 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 593 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 594 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 595
 596 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 597 #ifndef CONFIG_SPL_BUILD
 598 #define CONFIG_VID
 599 #endif
 600 #define CONFIG_VOL_MONITOR_IR36021_SET
 601 #define CONFIG_VOL_MONITOR_IR36021_READ
 602 /* The lowest and highest voltage allowed for T4240RDB */
 603 #define VDD_MV_MIN                      819
 604 #define VDD_MV_MAX                      1212
 605
 606 /*
 607  * eSPI - Enhanced SPI
 608  */
 609 #define CONFIG_CMD_SF
 610 #define CONFIG_SF_DEFAULT_SPEED         10000000
 611 #define CONFIG_SF_DEFAULT_MODE          0
 612
 613
 614 /* Qman/Bman */
 615 #ifndef CONFIG_NOBQFMAN
 616 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 617 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 618 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 619 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 620 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 621 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 622 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 623 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 624 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 625 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 626                                         CONFIG_SYS_BMAN_CENA_SIZE)
 627 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 628 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 629 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 630 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 631 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 632 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 633 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 634 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 635 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 636 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 637 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 638                                         CONFIG_SYS_QMAN_CENA_SIZE)
 639 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 640 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 641
 642 #define CONFIG_SYS_DPAA_FMAN
 643 #define CONFIG_SYS_DPAA_PME
 644 #define CONFIG_SYS_PMAN
 645 #define CONFIG_SYS_DPAA_DCE
 646 #define CONFIG_SYS_DPAA_RMAN
 647 #define CONFIG_SYS_INTERLAKEN
 648
 649 /* Default address of microcode for the Linux Fman driver */
 650 #if defined(CONFIG_SPIFLASH)
 651 /*
 652  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 653  * env, so we got 0x110000.
 654  */
 655 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 656 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 657 #elif defined(CONFIG_SDCARD)
 658 /*
 659  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 660  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 661  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 662  */
 663 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 664 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 665 #elif defined(CONFIG_NAND)
 666 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 667 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 668 #else
 669 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 670 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 671 #endif
 672 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 673 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 674 #endif /* CONFIG_NOBQFMAN */
 675
 676 #ifdef CONFIG_SYS_DPAA_FMAN
 677 #define CONFIG_FMAN_ENET
 678 #define CONFIG_PHYLIB_10G
 679 #define CONFIG_PHY_VITESSE
 680 #define CONFIG_PHY_CORTINA
 681 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 682 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 683 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 684 #define CONFIG_PHY_TERANETICS
 685 #define SGMII_PHY_ADDR1 0x0
 686 #define SGMII_PHY_ADDR2 0x1
 687 #define SGMII_PHY_ADDR3 0x2
 688 #define SGMII_PHY_ADDR4 0x3
 689 #define SGMII_PHY_ADDR5 0x4
 690 #define SGMII_PHY_ADDR6 0x5
 691 #define SGMII_PHY_ADDR7 0x6
 692 #define SGMII_PHY_ADDR8 0x7
 693 #define FM1_10GEC1_PHY_ADDR     0x10
 694 #define FM1_10GEC2_PHY_ADDR     0x11
 695 #define FM2_10GEC1_PHY_ADDR     0x12
 696 #define FM2_10GEC2_PHY_ADDR     0x13
 697 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 698 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 699 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 700 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 701 #endif
 702
 703
 704 /* SATA */
 705 #ifdef CONFIG_FSL_SATA_V2
 706 #define CONFIG_LIBATA
 707 #define CONFIG_FSL_SATA
 708
 709 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 710 #define CONFIG_SATA1
 711 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 712 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 713 #define CONFIG_SATA2
 714 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 715 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 716
 717 #define CONFIG_LBA48
 718 #define CONFIG_CMD_SATA
 719 #define CONFIG_DOS_PARTITION
 720 #define CONFIG_CMD_EXT2
 721 #endif
 722
 723 #ifdef CONFIG_FMAN_ENET
 724 #define CONFIG_MII              /* MII PHY management */
 725 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 726 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 727 #endif
 728
 729 /*
 730 * USB
 731 */
 732 #define CONFIG_CMD_USB
 733 #define CONFIG_USB_STORAGE
 734 #define CONFIG_USB_EHCI
 735 #define CONFIG_USB_EHCI_FSL
 736 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 737 #define CONFIG_CMD_EXT2
 738 #define CONFIG_HAS_FSL_DR_USB
 739
 740 #define CONFIG_MMC
 741
 742 #ifdef CONFIG_MMC
 743 #define CONFIG_FSL_ESDHC
 744 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 745 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 746 #define CONFIG_CMD_MMC
 747 #define CONFIG_GENERIC_MMC
 748 #define CONFIG_CMD_EXT2
 749 #define CONFIG_CMD_FAT
 750 #define CONFIG_DOS_PARTITION
 751 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 752 #endif
 753
 754 /* Hash command with SHA acceleration supported in hardware */
 755 #ifdef CONFIG_FSL_CAAM
 756 #define CONFIG_CMD_HASH
 757 #define CONFIG_SHA_HW_ACCEL
 758 #endif
 759
 760 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 761
 762 #define __USB_PHY_TYPE  utmi
 763
 764 /*
 765  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 766  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 767  * interleaving. It can be cacheline, page, bank, superbank.
 768  * See doc/README.fsl-ddr for details.
 769  */
 770 #ifdef CONFIG_PPC_T4240
 771 #define CTRL_INTLV_PREFERED 3way_4KB
 772 #else
 773 #define CTRL_INTLV_PREFERED cacheline
 774 #endif
 775
 776 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 777         "hwconfig=fsl_ddr:"                                     \
 778         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 779         "bank_intlv=auto;"                                      \
 780         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 781         "netdev=eth0\0"                                         \
 782         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 783         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 784         "tftpflash=tftpboot $loadaddr $uboot && "               \
 785         "protect off $ubootaddr +$filesize && "                 \
 786         "erase $ubootaddr +$filesize && "                       \
 787         "cp.b $loadaddr $ubootaddr $filesize && "               \
 788         "protect on $ubootaddr +$filesize && "                  \
 789         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 790         "consoledev=ttyS0\0"                                    \
 791         "ramdiskaddr=2000000\0"                                 \
 792         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 793         "fdtaddr=c00000\0"                                      \
 794         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 795         "bdev=sda3\0"
 796
 797 #define CONFIG_HVBOOT                                   \
 798         "setenv bootargs config-addr=0x60000000; "      \
 799         "bootm 0x01000000 - 0x00f00000"
 800
 801 #define CONFIG_LINUX                                    \
 802         "setenv bootargs root=/dev/ram rw "             \
 803         "console=$consoledev,$baudrate $othbootargs;"   \
 804         "setenv ramdiskaddr 0x02000000;"                \
 805         "setenv fdtaddr 0x00c00000;"                    \
 806         "setenv loadaddr 0x1000000;"                    \
 807         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 808
 809 #define CONFIG_HDBOOT                                   \
 810         "setenv bootargs root=/dev/$bdev rw "           \
 811         "console=$consoledev,$baudrate $othbootargs;"   \
 812         "tftp $loadaddr $bootfile;"                     \
 813         "tftp $fdtaddr $fdtfile;"                       \
 814         "bootm $loadaddr - $fdtaddr"
 815
 816 #define CONFIG_NFSBOOTCOMMAND                   \
 817         "setenv bootargs root=/dev/nfs rw "     \
 818         "nfsroot=$serverip:$rootpath "          \
 819         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 820         "console=$consoledev,$baudrate $othbootargs;"   \
 821         "tftp $loadaddr $bootfile;"             \
 822         "tftp $fdtaddr $fdtfile;"               \
 823         "bootm $loadaddr - $fdtaddr"
 824
 825 #define CONFIG_RAMBOOTCOMMAND                           \
 826         "setenv bootargs root=/dev/ram rw "             \
 827         "console=$consoledev,$baudrate $othbootargs;"   \
 828         "tftp $ramdiskaddr $ramdiskfile;"               \
 829         "tftp $loadaddr $bootfile;"                     \
 830         "tftp $fdtaddr $fdtfile;"                       \
 831         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 832
 833 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 834
 835 #include <asm/fsl_secure_boot.h>
 836
 837 #endif  /* __CONFIG_H */